Wireless Systems. Objectives of the course

Similar documents
Chapter 7 Multiple Division Techniques for Traffic Channels

Mobile & Wireless Networking. Lecture 2: Wireless Transmission (2/2)

ISHIK UNIVERSITY Faculty of Science Department of Information Technology Fall Course Name: Wireless Networks

Wireless Communication Fading Modulation

OFDMA Networks. By Mohamad Awad

Wireless Medium Access Control and CDMA-based Communication Lesson 16 Orthogonal Frequency Division Medium Access (OFDM)

Lecture LTE (4G) -Technologies used in 4G and 5G. Spread Spectrum Communications

UNIT- 7. Frequencies above 30Mhz tend to travel in straight lines they are limited in their propagation by the curvature of the earth.

Outline / Wireless Networks and Applications Lecture 7: Physical Layer OFDM. Frequency-Selective Radio Channel. How Do We Increase Rates?

About Homework. The rest parts of the course: focus on popular standards like GSM, WCDMA, etc.

Chapter 7. Multiple Division Techniques

Lecture 3: Wireless Physical Layer: Modulation Techniques. Mythili Vutukuru CS 653 Spring 2014 Jan 13, Monday

Chapter 2 Overview - 1 -

Overview of Digital Mobile Communications

Code No: R Set No. 1

Page 1. Overview : Wireless Networks Lecture 9: OFDM, WiMAX, LTE

EC 551 Telecommunication System Engineering. Mohamed Khedr

Chapter 2 Overview - 1 -

Lecture 3 Cellular Systems

Multiple Access Schemes

Performance Analysis of MIMO-OFDM based IEEE n using Different Modulation Techniques

Introduction to Digital Communications System


Mobile Radio Systems (Wireless Communications)

AM Limitations. Amplitude Modulation II. DSB-SC Modulation. AM Modifications

LESSON PLAN. LP-EC1451 LP Rev. No: 02 Sub Code & Name : EC1451 MOBILE COMMUNICATIONS Date: 05/12/2009. Unit: I Branch: EC Semester: VIII Page 01 of 06

Lecture 13. Introduction to OFDM

S.D.M COLLEGE OF ENGINEERING AND TECHNOLOGY

Technical Aspects of LTE Part I: OFDM

Amplitude Modulation II

SC - Single carrier systems One carrier carries data stream

EECS 380: Wireless Technologies Week 7-8

Objectives. Presentation Outline. Digital Modulation Lecture 01

Digital Signal Analysis

Digital Modulation Lecture 01. Review of Analogue Modulation Introduction to Digital Modulation Techniques Richard Harris

Practical issue: Group definition. TSTE17 System Design, CDIO. Quadrature Amplitude Modulation (QAM) Components of a digital communication system

Exam 3 is two weeks from today. Today s is the final lecture that will be included on the exam.

Lecture 12: Summary Advanced Digital Communications (EQ2410) 1

SPREAD SPECTRUM (SS) SIGNALS FOR DIGITAL COMMUNICATIONS

TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY

Detection and Estimation of Signals in Noise. Dr. Robert Schober Department of Electrical and Computer Engineering University of British Columbia

Lecture #2. EE 471C / EE 381K-17 Wireless Communication Lab. Professor Robert W. Heath Jr.

Multiple access techniques

TSEK02: Radio Electronics Lecture 2: Modulation (I) Ted Johansson, EKS, ISY

Channel & Modulation: Basics

Wireless Communications

INTRODUCTION TO COMMUNICATION SYSTEMS AND TRANSMISSION MEDIA

Comparisons Between USDC (IS-54) and GSM

Communications IB Paper 6 Handout 5: Multiple Access

Chapter 2: Wireless Transmission. Mobile Communications. Spread spectrum. Multiplexing. Modulation. Frequencies. Antenna. Signals

Effects of Fading Channels on OFDM

With a lot of material from Rich Nicholls, CTL/RCL and Kurt Sundstrom, of unknown whereabouts

Adoption of this document as basis for broadband wireless access PHY

Part 3. Multiple Access Methods. p. 1 ELEC6040 Mobile Radio Communications, Dept. of E.E.E., HKU

MODULATION AND MULTIPLE ACCESS TECHNIQUES

ECEn 665: Antennas and Propagation for Wireless Communications 131. s(t) = A c [1 + αm(t)] cos (ω c t) (9.27)

Communication Channels

Experimenting with Orthogonal Frequency-Division Multiplexing OFDM Modulation

ECE 476/ECE 501C/CS Wireless Communication Systems Winter Lecture 9: Multiple Access, GSM, and IS-95

OFDMA PHY for EPoC: a Baseline Proposal. Andrea Garavaglia and Christian Pietsch Qualcomm PAGE 1

Recap of Last 2 Classes

OFDMA and MIMO Notes

Chapter 5 OFDM. Office Hours: BKD Tuesday 14:00-16:00 Thursday 9:30-11:30

Chapter 4. Part 2(a) Digital Modulation Techniques

CH 4. Air Interface of the IS-95A CDMA System

Digital Communication System

TSTE17 System Design, CDIO. General project hints. Behavioral Model. General project hints, cont. Lecture 5. Required documents Modulation, cont.

Simple Algorithm in (older) Selection Diversity. Receiver Diversity Can we Do Better? Receiver Diversity Optimization.

Lecture 7: Centralized MAC protocols. Mythili Vutukuru CS 653 Spring 2014 Jan 27, Monday

UNIVERSITY OF CALIFORNIA College of Engineering Department of Electrical Engineering and Computer Sciences EECS 121 FINAL EXAM

Downloaded from 1

Performance Evaluation of Wireless Communication System Employing DWT-OFDM using Simulink Model

ECS455: Chapter 4 Multiple Access

MAS 160/510 Additional Notes: Modulation

CDMA Tutorial April 29, Michael Souryal April 29, 2006

TSEK02: Radio Electronics Lecture 8: RX Nonlinearity Issues, Demodulation. Ted Johansson, EKS, ISY

Broadcast Operation. Christopher Schmidt. University of Erlangen-Nürnberg Chair of Mobile Communications. January 27, 2010

OFDM AS AN ACCESS TECHNIQUE FOR NEXT GENERATION NETWORK

Lesson 8 Speech coding

Lecture 9: Spread Spectrum Modulation Techniques

Introduction to Amplitude Modulation

Digital Communication System

WCDMA Basics Chapter 2 OBJECTIVES:

RF/IF Terminology and Specs

Prepared for the Engineers of Samsung Electronics RF transmitter & power amplifier

GSM and WCDMA RADIO SYSTEMS ETIN15. Lecture no: Ove Edfors, Department of Electrical and Information Technology

ALi Linear n-stage t ShiftRegister output tsequence

Mobile Communication Systems. Part 7- Multiplexing

ECE513 RF Design for Wireless

Multiplexing Module W.tra.2

Wireless LANs/data networks

Multiple Access Techniques

ECE 457 Communication Systems. Selin Aviyente Assistant Professor Electrical & Computer Engineering

Revision of Previous Six Lectures

Anju 1, Amit Ahlawat 2

AM and FM MODULATION Lecture 5&6

Wireless Communication Systems: Implementation perspective

B.Tech II Year II Semester (R13) Supplementary Examinations May/June 2017 ANALOG COMMUNICATION SYSTEMS (Electronics and Communication Engineering)

ADVANCED WIRELESS TECHNOLOGIES. Aditya K. Jagannatham Indian Institute of Technology Kanpur

Digital Modulation Schemes

Transcription:

Wireless Systems http://www.commsys.isy.liu.se/en/student/kurser/tsks03 Jerzy Dąbrowski Communication Systems Department of Electrical Engineering LinköpingUniversity Objectives of the course Understand operation principles of the wireless communication systems Learn techniques which enable wireless signal transmission in multi-user systems (coding, modulation, channel sharing, ) Understand physical limitations of the contemporary wireless systems 2 1

Organization of the course Lectures 9x2h Project work: Study on a modern communication standard Project presentation (VT2) Course book: Theodore S. Rappaport, Wireless Communications -Principles and Practice, Prentice Hall, 2002, ISBN: 0-13-042232-0 Written exam (VT2) 3 Overview of course content Wireless systems: underlying concepts and technologies Wireless communication channel Multiple access Signal modulation Equalization and diversity Speech coding Error control and source coding Case study examples (e.g. GSM, WCDMA, LTE) 4 2

Key invention - Radio G.Marconi, A.Popov(1895) Radio broadcasting, R.Fessenden(1906) Heterodyne, Armstrong (1918) FM radio, E.Armstrong(1933) Detector Resonant circuit 2πf 0 = 1 LC Headphones Z > 2kΩ Digital radio TRx PA RF Filter LNA LP Filter I I LO Q Q LP Filter Frequency synthesizer LP Filter ADC DAC Base-band processor 5 Wireless communication channel Information Source Transmitter Channel Receiver Information Sink Physical layer of WS Conveys bit-stream of data Channel issues: - Loss - Interference - Distortion - Time-varying nature - Noise Transmitter/Receiver: - Filtering - Amplification - Modulation - Demodulation - Synchronization - 6 3

OSI model 7 OSI /Data Link Layer Deals with packets of bits Provides block synchronization Detects and corrects data errors Responsible for Medium Access Control (FDMA, TDMA, CDMA, SDMA) Responsible for power control and handover (of mobile terminals) 8 4

OSI /Network Layer Delivers packets to their correct destination (routing) Determines QoS Controls flow in system to avoid congestions 9 OSI /Higher Layers Transport layer Provides end-to-end communication. TCP in TCP/IP belongs here. ARQ can also be used here. Session layer Opens, closes and manages a communication session. Presentation layer Translates data for communication. Application layer The actual purpose or usage. Examples: SSH, FTP, IMAP These layers are less affected by the transmission medium 10 5

Multiple access FDMA base-line technique TDMA N channels = band f f f N time slots = frame t t t t t t Users_operate simultanously on individual frequencies Users_share the channel in different time slots CDMA N codes in same band C1 C2 C3 Users_operate simultanously and share the channel using individual codes 11 Modulation Necessary to convert signal into radio-waves Amplitude, frequency, and phase Constant amplitude modulation Pulse shaping, MSK Quadrature carriers (sine, cosine) QAM Multiple carriers (OFDM) Sinusoidal Carrier : v C ( t) = V cos C ( ω t + φ ) Frequency Phase Amplitude Angle C C Issues: distortions, ISI, bandwidth, noise spectral efficiency vs power efficiency (advanced modulation schemes vs amp. Linearity) 12 6

Modulation/ M-ary QAM s QAM (t) = α i cosω c t + β i sinω c t β α High spectral efficiency, R/BW But susceptible to noise and distortion (needs linear amplification) 16-ary QAM constellation (4 bits are grouped in 1 symbol) (T S and T S > τ av ) 13 Modulation/ OFDM Multiple sub-carriers to transmit signal bits in parallel for very high throughput Spectra of different sub channels can partly overlap OFDM is usually combined with QAM or n-psk PSD f c1 f c2 f c3 Tone modulated by rectangular pulse with interval T S f Orthogonal -spaced by 1/T S BW on each carrier < channel coherence BW freq. sel. fading avoided Implementation technique: IFFT/FFT 14 7

Equalization and diversity Channel band limited and provides multiple signal paths ISI occurs which can be corrected by equalization filters (usually adaptive), T S < σ τ Signal impairments (fading) can be corrected by diversity (redundancy by multiple signal samples over each symbol interval) - space diversity (multiple antennas, MIMO) - frequency diversity (multiple carriers, freq. hopping) - time diversity (RAKE receiver, interleaving) - polarization diversity 15 Error control coding & Speech coding Detection and correction of errors incurred in transmission //Forward error correction (FEC) - Convolutional and Turbo codes / correction -Block codes / Error Detection -Automatic repeat request (ARQ) latency issue Support by Interleaving (splitting bursts of possible errors in single errors) To reduce data rate and save bandwidth various speech coding techniques (LPC, Vocoders, Time/frequency coders, ) 16 8

Lectures 1. Introduction 2. Channel model 3. Multiple access 4. Modulation techniques 5. Equalization and diversity 6. Speech coding 7. Error control coding 8. Mobile telephony /Evolution of Communication systems 9. Overview of contemporary wireless systems 17 Timeline 2016 When Wednesday, January 20 Wednesday, February 3 Friday, February 5 Weeks 6-7 Monday, February 22 Week 8 Weeks 9-15 Monday, April 18 Week 16. Weeks 17-18 Monday, May 9 Friday, May 13 Week 20-21 Deadline Deadline Deadline Deadline What Course start Project selection List of three topics by email to Jerzy Dabrowski. Announcing project assignment Searching information, initial reading. Outline By email as a PDF to your supervisor. Supervision sessions. Reading and writing. Beta version of the report Email as a PDF to Jerzy Dabrowski via Urkund. Supervision sessions. Reading and rewriting. Final version of the report Email as a PDF to Jerzy Dabrowski via Urkund. Announcing three chosen reports and publishing all reports. Presentation seminars. 4 9