Universal Heavy-Duty Lathe 130 mm spindle bore, large turning diameter and center widths up to 8000 mm including 3-axis position indicator 22 kw motor workpiece weight up to 10 tons max. turning diameter over bed 2000 mm large spindle bearings
Maximum stability and high accuracy for roughing and finishing operations 22 kw motor ensures high cutting power induction hardened and ground guideways large spindle bearings heavy-duty cast-iron body with ribbed bed reduces vibrations to a minimum Joystick control for X and Z feeds is mounted directly to support hand wheel for tailstock adjustment (only on machines with center width over 3000 mm) separate rapid feed motor for feed in X and Z direction overload clutch enclosed in apron sturdy multi-disk clutch for headstock drive Description Furnished with completely assembled 3-axis position indicator
Specifications 500/1500 500/3000 500/5000 500/8000 Working area center width 1500 mm 3000 mm 5000 mm 8000 mm turning diameter over bed (max.) 1000 mm 1000 mm 1000 mm 1000 mm turning diameter over support (max.) 650 mm 650 mm 650 mm 650 mm travel X-axis 510 mm 510 mm 510 mm 510 mm travel Z-axis 1300 mm 2800 mm 4800 mm 7800 mm travel Z1-axis 300 mm 300 mm 300 mm 300 mm workpiece weight (max.) 6000 kg 6000 kg 6000 kg 6000 kg bed width 755 mm 755 mm 755 mm 755 mm swing range of top slide ± 180 ± 180 ± 180 ± 180 Headstock spindle speeds (right) (21) 3,15-315 rpm (21) 3,15-315 rpm (21) 3,15-315 rpm (21) 3,15-315 rpm spindle speeds (left) (12) 3,15-400 rpm (12) 3,15-400 rpm (12) 3,15-400 rpm (12) 3,15-400 rpm spindle bore 130 mm 130 mm 130 mm 130 mm spindle mount ISO A2-15 ISO A2-15 ISO A2-15 ISO A2-15 Feed feed X-axis 0,064-12 mm/u 0,064-12 mm/u 0,064-12 mm/u 0,064-12 mm/u feed Z-axis 0,032-6 mm/u 0,032-6 mm/u 0,032-6 mm/u 0,032-6 mm/u feed Z1-axis 0,016-3 mm/u 0,016-3 mm/u 0,016-3 mm/u 0,016-3 mm/u rapid feed X-axis 1870 mm/min 1870 mm/min 1870 mm/min 1870 mm/min rapid feed Z-axis 3740 mm/min 3740 mm/min 3740 mm/min 3740 mm/min Tapping tapping, metric (45) 1-120 mm (45) 1-120 mm (45) 1-120 mm (45) 1-120 mm tapping, diametric (42) 30-1/4 DP (42) 30-1/4 DP (42) 30-1/4 DP (42) 30-1/4 DP tapping, module (46) 0,5-60 mm (46) 0,5-60 mm (46) 0,5-60 mm (46) 0,5-60 mm tapping, whitworth (48) 0,5-60 GPZ (48) 0,5-60 GPZ (48) 0,5-60 GPZ (48) 0,5-60 GPZ Tailstock tailstock quill diameter 160 mm 160 mm 160 mm 160 mm tailstock quill taper metric 80 metric 80 metric 80 metric 80 tailstock quill stroke 300 mm 300 mm 300 mm 300 mm tailstock traverse adjustment ± 2,5 mm ± 2,5 mm ± 2,5 mm ± 2,5 mm Drive capacity motor rating headstock 22 kw 22 kw 22 kw 22 kw supply voltage 400 V 400 V 400 V 400 V Measures and weights overall dimensions 4600 x 1850 x 1790 mm 6100 x 1810 x 1790 mm 8100 x 1810 x 1790 mm 11100 x 1810 x 1790 mm weight 9350 kg 10850 kg 12650 kg 16100 kg Part. No. 300 499 300 500 300 502 300 504
Specifications 620/1500 620/3000 620/5000 620/8000 Working area center width 1500 mm 3000 mm 5000 mm 8000 mm turning diameter over bed (max.) 1250 mm 1250 mm 1250 mm 1250 mm turning diameter over support (max.) 900 mm 900 mm 900 mm 900 mm travel X-axis 630 mm 630 mm 630 mm 630 mm travel Z-axis 1300 mm 2800 mm 4800 mm 7800 mm travel Z1-axis 300 mm 300 mm 300 mm 300 mm workpiece weight (max.) 6000 kg 6000 kg 6000 kg 6000 kg bed width 755 mm 755 mm 755 mm 755 mm swing range of top slide ± 180 ± 180 ± 180 ± 180 Headstock spindle speeds (right) (21) 3,15-315 rpm (21) 3,15-315 rpm (21) 3,15-315 rpm (21) 3,15-315 rpm spindle speeds (left) (12) 3,15-400 rpm (12) 3,15-400 rpm (12) 3,15-400 rpm (12) 3,15-400 rpm spindle bore 130 mm 130 mm 130 mm 130 mm spindle mount ISO A2-15 ISO A2-15 ISO A2-15 ISO A2-15 Feed feed X-axis 0,064-12 mm/u 0,064-12 mm/u 0,064-12 mm/u 0,064-12 mm/u feed Z-axis 0,032-6 mm/u 0,032-6 mm/u 0,032-6 mm/u 0,032-6 mm/u feed Z1-axis 0,016-3 mm/u 0,016-3 mm/u 0,016-3 mm/u 0,016-3 mm/u rapid feed X-axis 1870 mm/min 1870 mm/min 1870 mm/min 1870 mm/min rapid feed Z-axis 3740 mm/min 3740 mm/min 3740 mm/min 3740 mm/min Tapping tapping, metric (45) 1-120 mm (45) 1-120 mm (45) 1-120 mm (45) 1-120 mm tapping, diametric (42) 30-1/4 DP (42) 30-1/4 DP (42) 30-1/4 DP (42) 30-1/4 DP tapping, module (46) 0,5-60 mm (46) 0,5-60 mm (46) 0,5-60 mm (46) 0,5-60 mm tapping, whitworth (48) 0,5-60 GPZ (48) 0,5-60 GPZ (48) 0,5-60 GPZ (48) 0,5-60 GPZ Tailstock tailstock quill diameter 160 mm 160 mm 160 mm 160 mm tailstock quill taper metric 80 metric 80 metric 80 metric 80 tailstock quill stroke 300 mm 300 mm 300 mm 300 mm tailstock traverse adjustment ± 2,5 mm ± 2,5 mm ± 2,5 mm ± 2,5 mm Drive capacity motor rating headstock 22 kw 22 kw 22 kw 22 kw supply voltage 400 V 400 V 400 V 400 V Measures and weights overall dimensions 4600 x 1810 x 1790 mm 6100 x 1880 x 192 mm 8100 x 1880 x 1920 mm 11100 x 1880 x 1920 mm weight 9750 kg 11550 kg 13300 kg 16800 kg Part. No. 300 505 300 506 300 508 300 510
Specifications 800/3000 800/5000 800/8000 Working area center width 3000 mm 5000 mm 8000 mm turning diameter over bed (max.) 1600 mm 1600 mm 1600 mm turning diameter over support (max.) 1280 mm 1280 mm 1280 mm travel X-axis 820 mm 820 mm 820 mm travel Z-axis 2800 mm 4800 mm 7800 mm travel Z1-axis 200 mm 200 mm 200 mm workpiece weight (max.) 6000 kg 6000 kg 6000 kg bed width 970 mm 970 mm 970 mm swing range of top slide ± 180 ± 180 ± 180 Headstock spindle speeds (right) (21) 2,5-250 rpm (21) 2,5-250 rpm (21) 2,5-250 rpm spindle speeds (left) (12) 3,15-250 rpm (12) 3,15-250 rpm (12) 3,15-250 rpm spindle bore 130 mm 130 mm 130 mm spindle mount ISO A2-15 ISO A2-15 ISO A2-15 Feed feed X-axis 0,064-12 mm/u 0,064-12 mm/u 0,064-12 mm/u feed Z-axis 0,032-6 mm/u 0,032-6 mm/u 0,032-6 mm/u feed Z1-axis 0,016-3 mm/u 0,016-3 mm/u 0,016-3 mm/u rapid feed X-axis 1870 mm/min 1870 mm/min 1870 mm/min rapid feed Z-axis 3740 mm/min 3740 mm/min 3740 mm/min Tapping tapping, metric (45) 1-120 (45) 1-120 mm (45) 1-120 mm tapping, diametric (42) 30-1/4 DP (42) 30-1/4 DP (42) 30-1/4 DP tapping, module (46) 0,5-60 mm (46) 0.5-60 mm (46) 0.5-60 mm tapping, whitworth (48) 0,5-60 GPZ (48) 0,5-60 GPZ (48) 0,5-60 GPZ Tailstock tailstock quill diameter 160 mm 160 mm 160 mm tailstock quill taper metric 80 metric 80 metric 80 tailstock quill stroke 300 mm 300 mm 300 mm tailstock traverse adjustment ± 2,5 mm ± 2,5 mm ± 2,5 mm Drive capacity motor rating headstock 22 kw 22 kw 22 kw supply voltage 400 V 400 V 400 V Measures and weights overall dimensions 6040 x 2060 x 2230 mm 8040 x 2060 x 2230 mm 11040 x 2060 x 2230 mm weight 12900 kg 16200 kg 21020 kg Part. No. 300 512 300 514 300 516
Specifications 1000/2000 1000/3000 1000/5000 1000/8000 Working area center width 2000 mm 2000 mm 5000 mm 8000 mm turning diameter over bed (max.) 2000 mm 2000 mm 2000 mm 2000 mm turning diameter over support (max.) 1600 mm 1600 mm 1600 mm 1600 mm travel X-axis 1020 mm 1020 mm 1020 mm 1020 mm travel Z-axis 1800 mm 1800 mm 4800 mm 7800 mm travel Z1-axis 200 mm 200 mm 200 mm 200 mm workpiece weight (max.) 10000 kg 10000 kg 10000 kg 10000 kg bed width 1100 mm 1100 mm 1100 mm 1100 mm swing range of top slide ± 180 ± 180 ± 180 ± 180 Headstock spindle speeds (right) (21) 2-200 rpm (21) 2-200 rpm (21) 2-200 rpm (21) 2-200 rpm spindle speeds (left) (12) 2,5-200 rpm (12) 2,5-200 rpm (12) 2,5-200 rpm (12) 2,5-200 rpm spindle bore 130 mm 130 mm 130 mm 130 mm spindle mount ISO A2-15 ISO A2-15 ISO A2-15 ISO A2-15 Feed feed X-axis 0,064-12 mm/u 0,064-12 mm/u 0,064-12 mm/u 0,064-12 mm/u feed Z-axis 0,032-6 mm/u 0,032-6 mm/u 0,032-6 mm/u 0,032-6 mm/u feed Z1-axis 0,016-3 mm/u 0,016-3 mm/u 0,016-3 mm/u 0,016-3 mm/u rapid feed X-axis 1870 mm/min 1870 mm/min 1870 mm/min 1870 mm/min rapid feed Z-axis 3740 mm/min 3740 mm/min 3740 mm/min 3740 mm/min Tapping tapping, metric (45) 1-120 mm (45) 1-120 mm (45) 1-120 mm (45) 1-120 mm tapping, diametric (42) 30-1/4 DP (42) 30-1/4 DP (42) 30-1/4 DP (42) 30-1/4 DP tapping, module (46) 0,5-60 mm (46) 0,5-60 mm (46) 0,5-60 mm (46) 0,5-60 mm tapping, whitworth (48) 0,5-60 GPZ (48) 0,5-60 GPZ (48) 0,5-60 GPZ (48) 0,5-60 GPZ Tailstock tailstock quill diameter 160 mm 160 mm 160 mm 160 mm tailstock quill taper metric 80 metric 80 metric 80 metric 80 tailstock quill stroke 300 mm 300 mm 300 mm 300 mm tailstock traverse adjustment ± 2,5 mm ± 2,5 mm ± 2,5 mm ± 2,5 mm Drive capacity motor rating headstock 22 kw 22 kw 22 kw 22 kw supply voltage 400 V 400 V 400 V 400 V Measures and weights overall dimensions 5200 x 2200 x 2400 mm 5200 x 2200 x 2400 mm 8100 x 2200 x 2400 mm 12920 x 2380 x 2510 mm weight 13000 kg 13000 kg 23200 kg 30080 kg Part. No. 300 518 300 519 300 520 300 522
Standard equipment Standard equipment - 3-axis position indicator - fallow rest (except for 800 series and 1000 series) - 4-jaw face plate (500/1500 to 500/8000 Ø = 1000 mm) (620/1500 to 620/8000 Ø = 1000 mm) (800/3000 to 800/8000 Ø = 1400 mm) (1000/2000 to 1000/8000 Ø = 1600 mm) - coolant system - steady rest (DL E 500 series = 50-470 mm) (DL E 620 series = 50-590 mm) (DL E 800 and 1000 series = 220-630 mm) - work lamp - center points - reducing sleeves - foundation bolts - central lubrication - operating tools - operator manual
position indicator 3-axis position indicator X.pos 3 As new addition or for retrofitting machine tools like lathes more accuracy lower error rate increased manufacturing safety significant time savings increased productivity easy to read display operator-specific features convenient keyboard layout resolution: 0.01 / 0.005 mm default coordinates axis position is maintained when display is turned off hole circle pattern calculation pocket calculator feature storage for 10 tools radius / diameter toggle mm/inch conversion easy expansion and maintenance- free operation display for top (Z0) and bedway slide (Z1) both separate and in differential / cumulative mode for lathes Position Indicators... a Must for any Machine Tool KNUTH Werkzeugmaschinen GmbH Schmalenbrook 14 D-24647 Wasbek Tel. 04321 / 6090 Fax 04321 / 68900 E-Mail: info@knuth.de