Superior Radar Imagery, Target Detection and Tracking SIGMA S6
S TA N D A R D F E AT U R E S SIGMA S6 Airport Surface Movement Radar Conventional Radar Image of Sigma S6 Ice Navigator Image of Radar Inputs Interface Hardware Host PC Platform Radar Transceiver - Supports remote serial protocols RSi-4000RT - Interfaces directly to most radars - Provides high-resolution digital video and synchronization signals to Sigma S6 A/D subsystem - Programmable gain and offset for video - Full-length 5V PCI Card - Bus Master data transfer Operating System - Windows XP Professional Service Pack 2 Analog Radar Video Input - 1 to 10 Volts, positive or negative - Default termination 2K or 75 Ohms - 30ns minimum pulse width Analog Radar Trigger - Single-ended - 200 Hz to 16 khz PRF - 1 to 25 Volts, positive or negative - Default termination 9.4K or 75 Ohms - Trigger Delay 0 to 7.2 micro-seconds SIGMA S6 Analog Radar Azimuth Change/Reference Pulse (ACP/ARP) - 1 to 35 Volts, positive or negative - 90 to 16384 ACP count per revolution - Default termination 4.7K, 75 or 500 Ohms In today's world, attention to safety, security and risk management in daily operations has taken on new significance. Rutter's Sigma S6 Radar Processor offers a cost-effective means to provide high-resolution imagery and detect and track more targets more reliably, and at longer ranges than ever before. As a result, operators are able to make faster and better decisions that reduce risks, incidents and daily operating costs. At the core of this enhanced radar capability is our proprietary radar processing and imaging technology. Sigma S6 is a Windows -based hardware and software product that processes and distributes radar video and track data. Using multi-layered processing, Sigma S6 not only strips out weather and other forms of clutter that can constrain conventional radar, it also enhances the radar's ability to track very small targets and multiple objects moving at differing speeds. Sigma S6's superior target detection and tracking capabilities make it ideal for many different applications. Three-Phase Synchro (optional) - 115, 26, 11.8, 2 VRMS - 50, 60, 400 Hz CVD (optional) - Interfaces to composite video radars such as the Raytheon MK1.5/MK2 Radar Transceiver - Provides video, trigger and remote RS-232 interface to the Sigma S6 Server - Decodes various non-standard signals - Half-length Universal 3.3V & 5V PCI Card Inputs: - Composite video: BNC connector, 50/75 Ohm - Serial uplink: RS-422 using DB9 female connector Minimum Computer Specifications - Intel Pentium 4-1GB RAM Bus Requirements - 1 5V PCI slot required RSi-4000RT - 1 Universal 3.3V & 5V PCI slot for optional CVD Card - 1 PCI/AGP slot for display video card - On-board PCI/IDE hard-disk controller Display - Ultra VGA (user-specified size) Power Requirements - 300W power supply Serial Communications - 2 COM ports required for input of GPS and gyro on non-fixed marine applications SIGMA S6 ON TANKER VESSEL Client/Server Support Gyro Interface - Interfaces to NMEA data from ship's gyro for north-up or head-up display DLL Interface (Windows XP) - Specification available for third-party software development - Controls the Sigma S6 server and returns status - Receives radar data, plots and tracks GPS - Accepts standard NMEA data strings for mobile installations - GPS position stored with every quadrant Image format - Device-independent bitmap (DIB,BMP) - B-Scan or Scan-converted output - Quadrant delivery or full 360 updates Digital Azimuth (TTL) Without Sigma S6 Clutter Removal Network protocols - TCP/IP, RPC, UDP Optional Radar Recording Hardware Disk Storage - SCSI Disk Array capable of up to 40 MB/s throughput Network Adapter - 100Base-T network capable of 3 MB/s throughput Analog Output Card - 12-bit Video at rates to 60 MHz With Sigma S6 Clutter Removal SIGMA S6 WITH COASTAL SURVEILLANCE RADAR Small Vessel Detection and Tracking SIGMA S6 WITH VTS RADAR Sigma S6 Radar Image and Tracking
S TA N D A R D F E AT U R E S SIGMA S6 Airport Surface Movement Radar Conventional Radar Image of Sigma S6 Ice Navigator Image of Radar Inputs Interface Hardware Host PC Platform Radar Transceiver - Supports remote serial protocols RSi-4000RT - Interfaces directly to most radars - Provides high-resolution digital video and synchronization signals to Sigma S6 A/D subsystem - Programmable gain and offset for video - Full-length 5V PCI Card - Bus Master data transfer Operating System - Windows XP Professional Service Pack 2 Analog Radar Video Input - 1 to 10 Volts, positive or negative - Default termination 2K or 75 Ohms - 30ns minimum pulse width Analog Radar Trigger - Single-ended - 200 Hz to 16 khz PRF - 1 to 25 Volts, positive or negative - Default termination 9.4K or 75 Ohms - Trigger Delay 0 to 7.2 micro-seconds SIGMA S6 Analog Radar Azimuth Change/Reference Pulse (ACP/ARP) - 1 to 35 Volts, positive or negative - 90 to 16384 ACP count per revolution - Default termination 4.7K, 75 or 500 Ohms In today's world, attention to safety, security and risk management in daily operations has taken on new significance. Rutter's Sigma S6 Radar Processor offers a cost-effective means to provide high-resolution imagery and detect and track more targets more reliably, and at longer ranges than ever before. As a result, operators are able to make faster and better decisions that reduce risks, incidents and daily operating costs. At the core of this enhanced radar capability is our proprietary radar processing and imaging technology. Sigma S6 is a Windows -based hardware and software product that processes and distributes radar video and track data. Using multi-layered processing, Sigma S6 not only strips out weather and other forms of clutter that can constrain conventional radar, it also enhances the radar's ability to track very small targets and multiple objects moving at differing speeds. Sigma S6's superior target detection and tracking capabilities make it ideal for many different applications. Three-Phase Synchro (optional) - 115, 26, 11.8, 2 VRMS - 50, 60, 400 Hz CVD (optional) - Interfaces to composite video radars such as the Raytheon MK1.5/MK2 Radar Transceiver - Provides video, trigger and remote RS-232 interface to the Sigma S6 Server - Decodes various non-standard signals - Half-length Universal 3.3V & 5V PCI Card Inputs: - Composite video: BNC connector, 50/75 Ohm - Serial uplink: RS-422 using DB9 female connector Minimum Computer Specifications - Intel Pentium 4-1GB RAM Bus Requirements - 1 5V PCI slot required RSi-4000RT - 1 Universal 3.3V & 5V PCI slot for optional CVD Card - 1 PCI/AGP slot for display video card - On-board PCI/IDE hard-disk controller Display - Ultra VGA (user-specified size) Power Requirements - 300W power supply Serial Communications - 2 COM ports required for input of GPS and gyro on non-fixed marine applications SIGMA S6 ON TANKER VESSEL Client/Server Support Gyro Interface - Interfaces to NMEA data from ship's gyro for north-up or head-up display DLL Interface (Windows XP) - Specification available for third-party software development - Controls the Sigma S6 server and returns status - Receives radar data, plots and tracks GPS - Accepts standard NMEA data strings for mobile installations - GPS position stored with every quadrant Image format - Device-independent bitmap (DIB,BMP) - B-Scan or Scan-converted output - Quadrant delivery or full 360 updates Digital Azimuth (TTL) Without Sigma S6 Clutter Removal Network protocols - TCP/IP, RPC, UDP Optional Radar Recording Hardware Disk Storage - SCSI Disk Array capable of up to 40 MB/s throughput Network Adapter - 100Base-T network capable of 3 MB/s throughput Analog Output Card - 12-bit Video at rates to 60 MHz With Sigma S6 Clutter Removal SIGMA S6 WITH COASTAL SURVEILLANCE RADAR Small Vessel Detection and Tracking SIGMA S6 WITH VTS RADAR Sigma S6 Radar Image and Tracking
S TA N D A R D F E AT U R E S SIGMA S6 Airport Surface Movement Radar Conventional Radar Image of Sigma S6 Ice Navigator Image of Radar Inputs Interface Hardware Host PC Platform Radar Transceiver - Supports remote serial protocols RSi-4000RT - Interfaces directly to most radars - Provides high-resolution digital video and synchronization signals to Sigma S6 A/D subsystem - Programmable gain and offset for video - Full-length 5V PCI Card - Bus Master data transfer Operating System - Windows XP Professional Service Pack 2 Analog Radar Video Input - 1 to 10 Volts, positive or negative - Default termination 2K or 75 Ohms - 30ns minimum pulse width Analog Radar Trigger - Single-ended - 200 Hz to 16 khz PRF - 1 to 25 Volts, positive or negative - Default termination 9.4K or 75 Ohms - Trigger Delay 0 to 7.2 micro-seconds SIGMA S6 Analog Radar Azimuth Change/Reference Pulse (ACP/ARP) - 1 to 35 Volts, positive or negative - 90 to 16384 ACP count per revolution - Default termination 4.7K, 75 or 500 Ohms In today's world, attention to safety, security and risk management in daily operations has taken on new significance. Rutter's Sigma S6 Radar Processor offers a cost-effective means to provide high-resolution imagery and detect and track more targets more reliably, and at longer ranges than ever before. As a result, operators are able to make faster and better decisions that reduce risks, incidents and daily operating costs. At the core of this enhanced radar capability is our proprietary radar processing and imaging technology. Sigma S6 is a Windows -based hardware and software product that processes and distributes radar video and track data. Using multi-layered processing, Sigma S6 not only strips out weather and other forms of clutter that can constrain conventional radar, it also enhances the radar's ability to track very small targets and multiple objects moving at differing speeds. Sigma S6's superior target detection and tracking capabilities make it ideal for many different applications. Three-Phase Synchro (optional) - 115, 26, 11.8, 2 VRMS - 50, 60, 400 Hz CVD (optional) - Interfaces to composite video radars such as the Raytheon MK1.5/MK2 Radar Transceiver - Provides video, trigger and remote RS-232 interface to the Sigma S6 Server - Decodes various non-standard signals - Half-length Universal 3.3V & 5V PCI Card Inputs: - Composite video: BNC connector, 50/75 Ohm - Serial uplink: RS-422 using DB9 female connector Minimum Computer Specifications - Intel Pentium 4-1GB RAM Bus Requirements - 1 5V PCI slot required RSi-4000RT - 1 Universal 3.3V & 5V PCI slot for optional CVD Card - 1 PCI/AGP slot for display video card - On-board PCI/IDE hard-disk controller Display - Ultra VGA (user-specified size) Power Requirements - 300W power supply Serial Communications - 2 COM ports required for input of GPS and gyro on non-fixed marine applications SIGMA S6 ON TANKER VESSEL Client/Server Support Gyro Interface - Interfaces to NMEA data from ship's gyro for north-up or head-up display DLL Interface (Windows XP) - Specification available for third-party software development - Controls the Sigma S6 server and returns status - Receives radar data, plots and tracks GPS - Accepts standard NMEA data strings for mobile installations - GPS position stored with every quadrant Image format - Device-independent bitmap (DIB,BMP) - B-Scan or Scan-converted output - Quadrant delivery or full 360 updates Digital Azimuth (TTL) Without Sigma S6 Clutter Removal Network protocols - TCP/IP, RPC, UDP Optional Radar Recording Hardware Disk Storage - SCSI Disk Array capable of up to 40 MB/s throughput Network Adapter - 100Base-T network capable of 3 MB/s throughput Analog Output Card - 12-bit Video at rates to 60 MHz With Sigma S6 Clutter Removal SIGMA S6 WITH COASTAL SURVEILLANCE RADAR Small Vessel Detection and Tracking SIGMA S6 WITH VTS RADAR Sigma S6 Radar Image and Tracking
CAPABILITIES & KEY FEATURES Accepts inputs from virtually any conventional radar Utilizes an API library to easily accommodate thirdparty applications Designed for operation over wired, wireless or microwave links Provides bit-depth reduction and no-loss compression algorithms for streamlining data transmissions over low bandwidth connections Provides remote access and enables radar images to be viewed and manipulated by operators and technicians at different locations Provides capability to connect multiple radars to multiple displays Provides ability to combine sectors from multiple radars into one display Designed, built and manufactured by Rutter provides the ability for the system to be modified for unique applications With a tracking capability of up to 1000 targets, the Sigma S6 Tracker dual-track mode can simultaneously detect and track very small, slow-speed targets and high-speed targets. This is achieved by optimizing plot extraction signal processing on separate channels, thereby providing uncompromised target detection and tracking. The Pulse-to-Pulse Processor offers superior noise reduction and tracking accuracy Its Scan Average Processor is optimized for enhanced detection of very small, slow-moving targets. It averages up to 64 consecutive radar scans for unsurpassed image definition. The processor also enables generation of a high-resolution Clutter Map used for removal of static targets for improved detection in all weather conditions Its Ordered Statistic CFAR Processor is a range-dependent clutter removal tool that removes an additional layer of weather clutter from the radar screen The STC control is a range and sensitivity-adjustable gain control for enhanced detection of near range targets in high clutter The optional Sigma S6 radar recording system provides for full dynamic range and full-resolution recording capability. The Sigma S6 digital recorder captures live radar feeds that may be used to record real incidents and isolate best practices for training and simulation exercises or post incident investigation analysis. The analog output module can regenerate full-resolution video data for playback on existing equipment. Optionally, synchronized audio can be recorded as well. As Sigma S6 Processor provides superior technology and flexibility in the most challenging situations, it is the logical choice for an increasing range of monitoring needs. Search and Rescue targets are seen on starboard side of the vessel in below right processed radar image but not seen in the below left unprocessed radar image. Without Clutter Removal With Clutter Removal
SIGMA S6 RADAR IMAGE FROM A VTS RADAR Without Clutter Removal With Clutter Removal VESSEL OPERATIONS The Sigma S6 Radar Processor is ideal for demanding applications such as marine radar enhancement for object detection and avoidance, ice detection and navigation, anti-piracy applications and search and rescue. SHORE-BASED MARITIME OPERATIONS Rutter's Sigma S6 technology is making harbours, navigable waterways and coastal waters safer around the world. Exceptional clarity combined with superior small object detection, and the ability to track multiple vessels moving at a wide range of speeds, provide a superior context for: harbour security, coastal surveillance, interdiction, vessel traffic systems and/or shore-based search and rescue. AVIATION SECTOR In the aviation sector, Sigma S6 adds value in a number of ways. Its remarkable clarity supports more efficient management of ramp traffic and take-off line ups. Its ability to produce a high-resolution image from radar, and track slow and fast moving objects simultaneously, enables Sigma S6 to be used for airport perimeter security applications. Its small target detection capability makes it the choice for radar processing by bird aircraft, strike hazard and bird detection companies around the world. DEFENSE, SECURITY & OTHER LANDSIDE APPLICATIONS All those attributes that have made Sigma S6 successful in both marine and aviation applications are finding usage in security applications. These include border patrol and security for bridges, water supplies and other strategic infrastructure. Sigma S6 is also finding applications in plant, military base and industrial site security as well as traffic management. Sweden Tel: + 46 706 386 396 Fax: + 46 706 143 143 sweden@ruttertech.com Italy Tel: + 39 0571 945099 Fax: + 39 0571 945406 italy@ruttertech.com Germany Tel: + 49 421 34 99 538 Fax: + 49 721 151 329 560 germany@ruttertech.com Greece Tel: + 30 210 3236935 Fax: + 30 210 3220643 greece@ruttertech.com Head Office 70 Brookfield Road St. John s, NL Canada A1E 3T9 Tel: + 1 709 368 4213 Fax: + 1 709 368 1337 sales@ruttertech.com www.ruttertech.com