Sensor Series Features PBT Resin, -wire/-wire DC System - Wide variety from thin 7mm model - Maximum detection distance: 0 mm - Front Surface / Upper Surface detection - s of different frequency are available for adjacent installation - NO/NPN/PNP output Type -wire DC System Form Operating Distance (mm) Form Remarks NO APS-F-Z APS-U-Z Ultra-thin Non-flush Mount Type NO APS-BU-Z APS-BF-Z NO APS-8F-Z 0 NO APS0-0F-Z -wire DC System Form Operating Distance (mm) Form Remarks APS-F-E Different frequency-classified models are available. ("L" or "H" is attached to the end of model number.) PNP NO APS-F-E APS-U-E Ultra-thin Non-flush Mount Type PNP NO APS-8F-E APS-8F-E Different frequency-classified models are available. ("L" or "H" is attached to the end of model number.) Different frequency-classified models are available. ("L" or "H" is attached to the end of model number.) 0 APS0-0F-E Different frequency-classified models are available. ("L" is attached to the end of model number.) PNP NO APS0-0F-E * Different frequency-classified models (H and L) are made-to-order products. Visit our website 0 GENERAL CATALOG 0 Latest catalog (free) is available online. http://www.koyoele.co.jp/english/
Sensor Series -wire DC System Non-flush Mount Type Effective Operating Distance mm 0% mm 0% 0 mm 0% Photo Remarks Front surface detection Front surface detection Front surface detection Form NO APS-F-Z APS-8F-Z APS0-0F-Z Price Open Open Open Rated Working Voltage / V DC (0 to 0 V DC) Allowable ripple rate: 0% p-p or less (Maximum peak voltage: 0 V or less) Standard (mm) Iron 0 x 0 x t Iron x x t Iron 0 x 0 x t Guaranteed Operating Distance Reaction Material Hysteresis 0 to. mm 0 to.0 mm 0 to 8.0 mm Iron/Non ferrous metal (Operating distance changes depending on materials.) 0% or less Operating Cycle Frequency khz 800 Hz 00 Hz Rated Working Current Voltage Drop Off-state Current Circuit Protection Indicator Lamp Use Ambient Temperature Temperature Characteristics Withstand Voltage Insulation Resistance Vibration Resistance Impact Resistance Protection Level Case Material Lead Wire to 00 ma V or lower TYP0.8 ma or lower (Up to.0ma or lower) Surge absorption circuit indication - to +70 C Within 0% (At the operating distance at +0 C),000 V AC 0/0 Hz ( minute) 0 MΩ or higher (00 V DC) Double amplitude:. mm, 0 to Hz ( h each for X, Y and Z direction) 00 m/s, within ms (0 times each for X, Y and Z direction) IP7 PBT resin Oilproof vinyl chloride cable m Outside diameter (Approx. ) 0. mm, core Tightening Torque 0. Nm or less 0.7 Nm or less.0 Nm or less Weight (g) Approx. Approx. Approx. 00 Oilproof vinyl chloride cable m Outside diameter (Approx. ) 0. mm, core The specifications and prices described in this catalog were valid when the catalog was issued. For the latest information, contact our sales persons or see our website. GENERAL CATALOG 0
Sensor Series -wire DC System Non-flush Mount Type Effective Operating Distance mm 0% mm 0% Photo Remarks Upper surface detection Upper surface detection Front surface detection Form NO APS-U-Z APS-BU-Z APS-BF-Z Price Open Open Open Rated Working Voltage / V DC (0 to 0 V DC) Allowable ripple rate: % p-p or less / V DC (0 to 0 V DC) Allowable ripple rate: 0% p-p or less Standard (mm) Iron x x t Iron 0 x 0 x t Guaranteed Operating Distance Reaction Material Hysteresis Operating Cycle Frequency Rated Working Current Voltage Drop Off-state Current Indicator Lamp Use Ambient Temperature Temperature Characteristics Withstand Voltage Insulation Resistance Vibration Resistance Impact Resistance Protection Level Case Material Lead Wire 0 to. mm Iron/Non ferrous metal (Operating distance changes depending on materials.) 0% or less 00 Hz to 00 ma V or lower TYP0.8 ma or lower (Up to.0ma or lower) indication - to +70 C Within 0% (At the operating distance at +0 C),000 V AC 0/0 Hz ( minute) 0 MΩ or higher (00 V DC) Double amplitude:. mm, 0 to Hz ( h each for X, Y and Z direction) 00 m/s, within ms (0 times each for X, Y and Z direction) IP7 PBT resin Oilproof vinyl chloride cable m Outside diameter (Approx..) 0. mm, core Tightening Torque 0. Nm or less 0. Nm or less Weight (g) Approx. 0 Approx. 0 Oilproof vinyl chloride cable. m Outside diameter (Approx. ) 0. mm, core Visit our website GENERAL CATALOG 0 Latest catalog (free) is available online. http://www.koyoele.co.jp/english/
Sensor Series -wire DC System Non-flush Mount Type Effective Operating Distance mm 0% mm 0% 0 mm 0% Photo Remarks Different frequency-classified models are available. Front surface detection Different frequency-classified models are available. Front surface detection Different frequency-classified models are available. Front surface detection Form PNP NO Rated Working Voltage No-load Current APS-F-E APS-8F-E APS0-0F-E Price Open Open Open APS-F-E APS-8F-E APS0-0F-E Price Open Open Open / V DC (0 to 0 V DC) Allowable ripple rate: % p-p or less 0 ma or lower Standard (mm) Iron 0 x 0 x t Iron x x t Iron 0 x 0 x t Guaranteed Operating Distance 0 to. mm 0 to.0 mm 0 to 8.0 mm Reaction Material Iron/Non ferrous metal (Operating distance changes depending on materials.) Hysteresis 0% or less Operating Cycle Frequency khz 800 Hz 00 Hz Rated Working Current Up to 00 ma ( V DC)/Up to 00 ma ( V DC) Voltage Drop. V or lower (.0 V TYP) Off-state Current 00 μa or less Indicator Lamp indication Use Ambient Temperature - to +70 C Temperature Characteristics Within 0% (At the operating distance at +0 C) Withstand Voltage 00 V AC 0/0 Hz ( minute) Insulation Resistance MΩ or higher (00 V DC) Vibration Resistance Double amplitude:. mm, 0 to Hz ( h each for X, Y and Z direction) Impact Resistance 00 m/s, within ms (0 times each for X, Y and Z direction) Protection Level IP7 Case Material PBT resin (Polycarbonate for the indicator lamp of APS, APS and APS0) Lead Wire Oilproof vinyl chloride cable m Outside diameter (Approx. ) 0. mm, core Oilproof vinyl chloride cable m Outside diameter (Approx. ) 0. mm, core Approx. 0. Nm or less 0.7 Nm or less.0 Nm or less Weight (g) Approx. Approx. Approx. 00 * "L" or "H" is attached to the end of model number of the various frequency-classified models. (Made-to-order product) The specifications and prices described in this catalog were valid when the catalog was issued. For the latest information, contact our sales persons or see our website. GENERAL CATALOG 0
Sensor Series -wire DC System Non-flush Mount Type Effective Operating Distance mm 0% Photo Remarks Upper surface detection Form Price APS-U-E Open Rated Working Voltage No-load Current Standard (mm) Guaranteed Operating Distance / V DC (0 to 0 V DC) Allowable ripple rate: 0% p-p or less 0 ma or lower Iron x x t 0 to. mm Reaction Material Hysteresis Operating Cycle Frequency Rated Working Current Voltage Drop Off-state Current Indicator Lamp Use Ambient Temperature Temperature Characteristics Withstand Voltage Insulation Resistance Vibration Resistance Impact Resistance Protection Level Case Material Lead Wire Tightening Torque Iron/Non ferrous metal (Operating distance changes depending on materials.) 0% or less 00 Hz Up to 00 ma. V or lower (.0 V TYP) 00 μa or less indication - to +70 C Within 0% (At the operating distance at +0 C),000 V AC 0/0 Hz ( minute) 0 MΩ or higher (00 V DC) Double amplitude:. mm, 0 to Hz ( h each for X, Y and Z direction) 00 m/s, within ms (0 times each for X, Y and Z direction) IP7 PBT resin Oilproof vinyl chloride cable m Outside diameter (Approx..) 0. mm, core 0. Nm or less Weight (g) Approx. 0 Visit our website GENERAL CATALOG 0 Latest catalog (free) is available online. http://www.koyoele.co.jp/english/
Sensor Connection/ Series Connection and Not Present Present ( ) -wire DC System -Z -wire DC System NPN -E -wire DC System PNP -E Sensor Brown (White) + Blue (Black) The load can be connected to either side of the power source. Sensor Brown (Red) + Black (White) Blue (Black) Sensor Brown (Red) + Black (White) Blue (Black) Indication Indication Indication Note: indicates a load. Installation / Effects of Surrounding Metal Since the proximity sensor is affected by surrounding metal, install it remotely enough from the described dimensions. Installation - Parallel arrangement of infinite plane metal body A * - Parallel arrangement of plane metal body to the detector surface B * - Arrangement to fenestrate metal body C - Arrangement of metal body at the front (Unit: mm) - Parallel arrangement - Opposing arrangement Front detection type D APS-F-... 0 0 0 0 0 APS-8F-.. 8 0 0 0 APS0-0F-... 70 0 00 0 APS-U-..... APS-BU-Z 0 0 0 0 APS-BF-Z 0 0 0 0 * Position of the target body in the top detection models - When there is metal around the proximity sensor, the operating distance changes and makes operation unstable. Therefore, place the surrounding metal as remotely as possible from the proximity sensor. - Since the D dimension (mm) is the minimum value from the proximity sensor's detector surface to the surrounding metal body, place the metal more remotely than the numeric values shown in the table above. D D Mutual Interference and Frequency Classification When two or more proximity sensors are closely installed, the installation interval of the sensors should be more than 0 times the operating distance (between centers). If the interval is too short, mutual interference may occur. If the interval cannot be sufficiently secured, use modes with differently classified frequency. The frequency classification is represented by the alphabet after the operating distance in the normal model number. - s with a classified frequency are shown by the mark on the cable. H :Yellow spiral L : Red spiral Combination of s Classified by Frequency (The sensors can be mounted with the cases tightly attached.) APS-F-E(M)LH APS-8F-E(M)LH APS-8F-E(M)LH L (M) H * It requires consideration when or more sensors are closely mounted. (Example) APS-F-E (M)... of standard frequency (M is not normally indicated.) -E (M) APS-F-EL... with lower frequency than the standard APS-F-EH... with higher frequency than the standard APS0-0F-E(M)L L (M) * It requires consideration when or more sensors are closely mounted. The specifications and prices described in this catalog were valid when the catalog was issued. For the latest information, contact our sales persons or see our website. GENERAL CATALOG 0
Sensor Series Connection and Detection Range Diagram (Representative Examples) APS-U-/BU/BF-... APS-F-... APS-8F-... Operating Distance (mm) Return Operating Distance (mm) Return Operating Distance (mm) Return 0 Distance from the Center of Sensor (mm) 0 8 0 8 0 Distance from the Center of Sensor (mm) 0 8 0 8 0 Distance from the Center of Sensor (mm) APS0-0F-... 0 9 Operating Distance (mm) Return 8 7 0 8 0 8 0 Distance from the Center of Sensor (mm) Shape Based Characteristics (Representative Examples) APS-U-/BU/BF-... APS-F-... APS-8F-... Operating Distance X (mm) Iron SUS0 Aluminum Copper a x 0 0 0 0 Dimensions of One Side of the "a" (mm) t = mm Operating Distance X (mm) Iron SUS0 Aluminum 0 0 0 0 Dimensions of One Side of the "a" (mm) a t = mm x Operating Distance X (mm) Iron SUS0 Aluminum Copper t = mm 0 0 0 0 Dimensions of One Side of the "a" (mm) a x APS0-0F-... Operating Distance X (mm) 0 Iron 8 SUS0 Aluminum Copper t = mm 0 0 0 0 Dimensions of One Side of the "a" (mm) a x Visit our website GENERAL CATALOG 0 Latest catalog (free) is available online. http://www.koyoele.co.jp/english/
Dimensions (Unit: mm) APS-F-... -M Mounting Hole -M Mounting Hole 0 APS-8F-... Sensor Series Dimensions LED -M Mounting Hole 0 8.. 0 0 0 0 0 0 7 8 0 0 -. Hole. APS-F-Z APS-F-E. Scale / 0 APS-U-... 8 LED -M Mounting Hole APS-BU/BF-.... Top Detection LED 8 0 0. -. Hole 9 9..9 Front Detection ±0. 7 0..7 APS-8F-Z APS-8F-E Scale / APS0-0F-... 7 -M Mounting Hole 0 0 APS0-0F-Z APS0-0F-E Scale / LED -. Hole 8 0 7. APS-U-Z APS-U-E Scale / Top Detection LED. The specifications and prices described in this catalog were valid when the catalog was issued. For the latest information, contact our sales persons or see our website. 9..9 GENERAL CATALOG 0 7