Sirius 250/350 Watts, Single / Multi output AC-DC, modular power solution

Similar documents
DSA150 Series. xxx Series. 150 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details 3.92 (99.8) 2.18 (55.5) 4.92 (125.

DSR120 Series. xxx Series. 120 Watts. AC-DC Power Supplies. Models & Ratings. Mechanical Details

LCL Series. SIngle Output Industrial Supplies. High Efficiency. Low Cost. 150 W Convection Cooled. 300 W & 500 W with Internal Fans

NV /180/200 Watts AC/DC Flexible Power Solution

Medical Safety Approvals (-M versions) Industrial Heavy Duty Terminals. Output Power up to 1500 W. High Power Density - 18W/in 3

300µA max at 264Vac & 63Hz (normal condition, 500µA Single Fault Condition) Adjustment Range V V. Channel

Output Power (W) Industry Leading Performance. Fuse

Industrial Serie +600S

The MPB150 product line is approved to the latest international regulatory standards, and displays the CE Mark.

NV-350 / NV Watts Modular power solution With up to 1450W peak rating for 10 seconds

General. Environmental. EMC & Safety

Vega Series 450, 650 & 900 Watts Modular Power Solution

ECP225-A Series. 225 Watts. AC-DC Power Supplies. Models & Ratings

IMA 600 Watts Power Supply Series. for medical and industrial applications. Product datasheet

Vega Series (Vega-Lite)

3 in 1 Dimmable (0-10Vdc, PWM signal, or resistance)

NV-350 / NV W W Modular power supply. Features Benefits Input How To Create A Product Description NV3 Converter NV3 3 NV7 7

ECC100 Series. -40 ºC to +75 ºC Operation. 100 W - Baseplate Cooled. High Efficiency Resonant Topology. Screw Terminals Available.

IMA 1000 Watts Power Supply Series. for medical and industrial applications. Product data sheet

Electrical Specifications

These medical power supplies are ideal for monitoring, home health equipment as well as surgical devices.

General. Environmental. EMC & Safety

IMA 400 Watts Power Supply Series. for medical and industrial applications. Product data sheet

NEVO+1200M. 6 x6 x W. 1.2kg DATA SHEET MAIN FEATURES

These power supplies are ideal for telecom, datacom, industrial equipment and other applications.

NV W Configurable power supply. NV-300. Input. How To Create A Product Description. QUICK SELECTOR - example configurations

Low cost of ownership. Adjustment Range V V V. Channel V / 15A 2.7V / 15A 3.3V / 15A Omit 5V / 10A 10 Omit 5V / 8A 8 Omit

420 W High Line Output Power. Rugged Industrial Construction. -40 C to +70 C Operation. 5 V Standby. Screw Terminals. SEMI F47 Compliant

TE60 60W Single Output External Power Test & Measurement/Industrial Series

Output Power Output Voltage (3) Output Current Total Regulation (2) Efficiency (5) Model Number (1,6) 8 W 3.3 VDC 2.50 A 7% 68% AEL15US03 (4) 12 W

5 x 3 x 0.75 Inches form factor. 275 Watts with Forced Air Cooling. Efficiencies up to 92% Standby Power < 0.5 W

Input Frequency. Input Fuse 6.3A Fast acting (not user accessible) Inrush Current 15A typical at 25 C and 230Vac (cold start) Earth Leakage Current

Electrical Specifications

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 320VAC 360VAC 400VAC 400VAC

Notes: Note1: Efficiency is tested at nominal input and full load at +25 C ambient. Output Voltage 400VAC 400VAC

These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.

Features. Regulated Converters. RAC01-C RAC02-C 1-2 Watt Single Output RAC0_- C. AC/DC Converter

Low cost of ownership. Input Frequency. Adjustment Range V V V. Channel 3 3

TE60 60W Single Output External Power Test & Measurement/Industrial Series

Series AMEPR60-AZ up to 5A AC-DC / DC-DC LED Driver / Converter

PEAK OUTPUT CURRENT 1. MAP V 4.7V to 5.8V 8A 11A 0.2% ±1% 1% 4.9V to 5.1V PEAK OUTPUT CURRENT 4 LINE REGULATION

Output Voltage (Vfan) Convection-cooled (6,7) Forced-cooled (8) & Current

TE W Single Output External Power Test & Measurement/Industrial Series

150 Watt Industrial (WLT)

TE90 90W Single Output External Power Test & Measurement/Industrial Series

Watts HCP Series

TPP 40 Series, 40 Watt. Order code Output voltage Output current max. Efficiency. max. screw terminal pin connector Vout 1 Vout 2 Vout 3

Output Voltage (Vfan) & Current

CCH400 & CCH600 Series

Compliance. Safety Approvals USA Canada Europe. Isolation: General. Dimensions. AC Input CN1 Output CN2 Optional CN3. Weight

Inrush Current (cold start)

Features. Regulated Converter. RAC02-SE/277/W 2 Watt Single Output. RAC02- SE/277/W Wired. AC/DC Converter

The MBC550 range is ideally suited to a wide variety of medical applications, and also where airflow is limited or not available.

Output Voltage* (nom.)(adjustable)

Voltage Adjustment. Load Regulation

TB65 65W Single Output Test and Measurement/Industrial Series

Power Factor (2) 600 ma 90 ~ 305 Vac Vdc 34.2 W 86% 0.95 LUC-040S060RSP. Efficiency (2) Parameter Min. Typ. Max. Notes

Features. Regulated Converters. RAC05-K 5 Watt 1 x 1 Single Output RAC05- SK. AC/DC Converter

Electrical Specifications VAC/390 VDC, Universal (Derate from 100% at 115VAC to 78% at 90VAC)

LB115S 115W Single Output

LPS. TE20 15W-20W Single Output External Power Test & Measurement/Industrial Series. Features

C B. Models. Models 2MOPP

Features. Regulated Converters. RACM Watt Enclosed Case Style Single Output. RACM150- S/ _ Fan Option (1) Single. AC/DC Converter.

TMT Series, 10 to 50 Watt. Order Code Output Power Output 1 PCB-Mount Chassis Mount max.

These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.

HEC-45LTN-45PFAS Rev A

Features. Regulated Converter. RAC02-SE/277 2 Watt Single Output RAC02- SE/277. AC/DC Converter

Sirius F 250 Handbook (Page 1 of 5) Part Number 17133

PDAM500 Series 500W Power Supply

Note1: Efficiency is tested at nominal input and full load at +25 C ambient Note2: Max Cap Load is tested at nominal input and full resisitive load

FEATURES AND BENEFITS. Compact size: 6.5 x 2.8 x 1.5

TE40 40W Single Output External Power Test & Measurement/Industrial Series

CB Scheme UL508 UL ATEX II3G

TECHNICAL DATASHEET MDS Medical AC-DC Open Frame 065APS18 B Highlights & Features Safety Standards Model Number: Unit Weight Dimensions (W x L x H):

Features. Regulated Converter. RAC05-K 5 Watt 1 x 1. Single Output RAC05- SK. AC/DC Converter

Model Number Output V1/V2/V3 Output I1/I2/I3 max. Ripple & Noise Efficiency(min/nom) Capacitive Load

NLP65 SERIES 75 Watt Open Frame Power Supply Measures: 5.00 x 3.00 x 1.26

Features. Regulated Converter. RAC04-C/277 4 Watt Single and Dual Output RAC04- C/277 -_. AC/DC Converter

Features. Regulated Converter RACM Watt Enclosed & Open Frame Case Style Single Output RACM65- S / - AC/DC Converter.

The MDU150 Series provides the same benefits as the MPU150 Series, with nominal 48 volt DC input.

Features. Regulated Converter RAC05- SK/C14. RAC 5 Watt Single Output RAC05-3.3SK/C14. AC/DC Converter

Asia-Pacific North America Europe, Middle East Bel Power Solutions, Inc. BCD.

FS24W Series LED Driver Input: V High Power Factor High efficiency Subminiaturization IP66 SPECIFICATIONS

IP67 DESCRIPTION KEY FEATURES MARKET SEGMENT AND APPLICATIONS TRC ELECTRONICS, INC

Series AM50E-NZ 50 Watt DC-DC Converter

This convection-cooled series is designed for use in commercial and industrial environments in temperatures up to 50 C.

Doc. EA Model Number:

LFWLP W 12V 15.00A 25.00A 92%

Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT AC/DC Converter

Electrical Specifications. Input Current 115 VAC: 1.2 A max. 230 VAC: 0.65 A max.

Features. LED Driver RACT Watt. TRIAC Dimmable. Single Output RACT12- AC/DC Converter

ABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.

Product Specification sheet

18V 35V 65V 40A 60A 1.5W 1.2W ms 40ms. 20ms 20ms

ABC Series power supplies are ideal for telecom, datacom, industrial equipment and other applications.

SAMSUNG ELECTRO-MECHANICS CO., LTD

Features. Regulated Converter. RAC05-K/277 5 Watt Single Output RAC05- SK/277/W. AC/DC Converter

HEC-30/35LTA-33TDAA Rev A

(*) Reference the User Manual or contact the factory for parallel operation between modules plugged into slots 1/2/3/4 and slots 5/6/7/8.

These power supplies are ideal for medical, telecom, datacom, industrial equipment and other applications.

Transcription:

Up to 350W Up to 6 outputs Voltages up to 28V, Current up to 50 mps Fast-on output connection Worldwide approvals 3 Year Warranty Sirius 250/350 Watts, Single / Multi output C-DC, modular power solution Key Market Segments & pplications Instrumentation Broadcast utomation TE Security Industrial Computing Network Servers/Routers Lifesciences/Laboratory Features and Benefits Features Modular construction Industry Standard footprint Various cooling options Benefits High Flexibility Simpler installation Easier to design into system INPUT Input Voltage Input Frequency Inrush Current Input Fuse Leakage Current Lower Leakage Option Power Factor 85-264Vac, 120-340Vdc (120-360Vdc for CSF350) 47-440Hz <25 at 25 C and 264Vac (cold start) (<40 for CS250 and CSF250) 250Vac HBC Fast cting (not user accessible) 6.3 for 250W, 10 for 350W 0.8m max at 264Vac & 50Hz see configuring guide >0.93 typical (reduced pfc above 254Vac or >65Hz) OUTPUT Voltage / Current See module output table Switching Frequency 110kHz - PFC converter, 190kHz - Output converter Efficiency >70% typical, config dependent Ripple 1% (50mV on 3V outputs) Noise <1% Pk- Pk, using EIJ test method & 20MHz bandwidth. (For 3V and 5V main output, 2% pk-pk or 50mV) Voltage ccuracy <1% of set Voltage Remote Sense Yes 0.5V on all main board outputs and L and modules Minimum Load No on any output for CSF250 and CSF350. (10% on output 1 for full spec on CS250) Temperature Coefficient <0.02% of rated voltage per C Total Regulation 3% or 50mV whichever is greater Peak Current max 150% 1 sec in 10 on o/p 2 and all modules >9V Over Voltage Protection Standard for all outputs, shuts down converter, auto restarts Over Current Protection Standard all outputs short circuit protected (with auto-recovery) Short Circuit Protection <150% of rated current, when output voltage <1% Over Temperature Protection Yes on converter and output regulators (with auto recovery) Note shutdown temp varies according to ambient, output power and input V SFETYPPROVLS Date mendments Date mendments EN 60950-1* 2001 CS22.2 No 60950-1 2003 UL 60950-1 2003 IEC60950-1* 2001 * CB Certificate and report available on request CE Mark LV Directive 2006/95/EC (EN60950-1) Sirius Series 1

EMISSIONS EN61000-6-3:2001 Radiated Electric Field EN55022 Class B (as per CISPR.22) See application note for details. Conducted Emissions EN55022 Class B (as per CISPR.22) Conducted Harmonics EN61000-3-2: 2001 Compliant to Class Flicker EN61000-3-3: 1995 + 1:2001 Compliant - d max only. IMMUNITY EN61000-6-2:2001 Criteria Electrostatic Discharge EN61000-4-2: 1995 Level 4 ir discharge 15kV Contact discharge 8kV Electromagnetic Field EN61000-4-3: 2002 Level 3 10V/m (tested to 12V/m) Input 4kV Fast / Burst Transient EN61000-4-4: 2004 Level 4 Outputs 2kV, Tested at 5kHz Surge Immunity EN61000-4-5: 1995 Level 3 Line to Line 1kV Line to Earth 2kV Conducted RF Immunity EN61000-4-6: 1996 Level 3 10V (tested to 12V) Power Frequency Magnetic Field EN61000-4-8: 1994 Level 3 10/m Continuous Voltage Dips, Variation, Interruptions EN61000-4-11: 1995 Pass B for 5s interruptions Voltage Fluctuations EN61000-4-14: 1999 + 1: 2004 Class 3 For 100 to 240V nominal ENVIRONMENT Temperature 0 C to 70 C operational, -40 to 85 C storage (max 12 months). IEC input connector max rating 65 C (EI and SI models) Derating 50 C to 70 C derate each output by 2.5% per C Humidity Shock 5-95% RH non condensing Vibration 10-200Hz @ 1.5g ltitude 3000 shocks, each of 10g (16ms) half sine Pollution Degree 2, Material group 3 IP Rating IP 10 Weight 3,000 metres operational (2,000 metres CS250 and CSF250) 1.27 kg ISOLTION Input to Output Reinforced 4.3 kv (dc) Output to Earth Operational 100 V (dc) Input to Earth Basic 2.3 kv (dc) Output to Output Operational 100 V (dc) OUTPUTVOLTGES(Outputs1and2,mainboardoutputs) UnitType Outputs V1djustment V2djustment mps 1and2 Range(Volts) Range(Volts) mps Notes 5/3.3 5-5.5 a 35 2.7-3.5 b 16 c These outputs have common 0V CS250 5/12 5-5.5 a 35 9-15 8 These outputs have common 0V 24 24-28 10-3.3/5 1.8-3.8 30 4.5-5.5 a 20 These outputs have common 0V CSF250 5/12 4.5-8.0 25 9-13 10 5/24 4.5-8.0 25 18-25 6 5/3.3 3.9-5.7 50 e 1.8-3.9 20 These outputs have common 0V 3.3/5 1.8-3.9 50 f 3.9-5.7 20 These outputs have common 0V CSF350 3.3/12 1.8-3.9 50 d 10-16 12 5/12 3.9-5.7 50 d 10-16 12 24 18-28 15 - Notes: all voltages in this table include sense voltage (total line drop) unless otherwise stated all outputs galvanically isolated unless otherwise stated a - maximum voltage at terminals = 5.7V b - maximum voltage at terminals = 3.8V c - max current from output 2 must not exceed 2 x current from output 1 d - 45 above 40 C ambient e - 45 above 35 C ambient, 40 above 45 C f - 45 above 45 C ambient 2 Sirius Series

OUTPUTS3-6 (SingleOutputModules) (twinoutputmodules) UnitType CS250 CSF250 CSF350 Module djustment mps c Module V1djustment mps c V2djustment mps L 1.8-3.9 b 10 (15) D d 4.5-5.5 5 (7.5) 2.7-3.9 5 (7.5) 4.5-5.5 b 10 (15) M 4.5-5.5 5 (7.5) 4.5-5.5 5 (7.5) B 11-15 8 (12) E 4.5-5.5 5 (7.5) 9-15 4 (6) C 16-28 4 (6) F 4.5-5.5 5 (7.5) 16-28 2 (3) G 9-15 4 (6) 9-15 4 (6) H 9-15 4 (6) 16-28 2 (3) J 16-28 2 (3) 16-28 2 (3) L 1.8-3.8 b 14 D d 4.5-6 5 (7.5) 2.7-4 5 (7.5) 4.5-6 b 10 (15) M 4.5-6 5 (7.5) 4.5-6 5 (7.5) B 9-16 8 (12) E 4.5-6 5 (7.5) 9-16 4 (6) C 17-30 4 (6) F 4.5-6 5 (7.5) 17-30 2 (3) G 9-16 4 (6) 9-16 4 (6) H 9-16 4 (6) 17-30 2 (3) J 17-30 2 (3) 17-30 2 (3) L 1.8-3.5 b 16 (24) D d 4.5-5.5 6 (9) 2.7-3.9 6 (9) 4.5-5.5 b 12 (18) M 4.5-5.5 6 (9) 4.5-5.5 6 (9) B 9-15 9.5 (14.25) E 4.5-5.5 6 (9) 9-15 4.5 (6.75) C 16-28 4.5 (6.75) F 4.5-5.5 6 (9) 16-28 2.5 (3.75) G 9-15 4.5 (6.75) 9-15 4.5 (6.75) H 9-15 4.5 (6.75) 16-28 2.5 (3.75) J 16-28 2.5 (3.75) 16-28 2.5 (3.75) Notes: a - all module outputs are isolated b - will allow 0.5V remote sense (total line drop), but will not adjust above specified range c - values for mps in brackets are peak values SiriusConfiguringGuide With our Sirius range of power supplies, it possible to achieve many combinations of Volts and mps. For the optimum configuration, please contact our sales office. However you can also create your own configuration from this datasheet by using the guide below. ConfiguringfromDatasheet 1 Select main outputs 1 and 2 from table on page 2. Calculate total output power to determine CS250 of CSF350 then select required Cooling and Leakage Current from the following table:- 2 Select Output Modules and Options from the Output Voltages tables. Output Power CS250 CSF250 CSF350 250W 250W 350W Cooling L No cover, no fan N Covered, No fan S Single end fan (CSF250 only) E Dual end fans (all models) T Single top fan (all models) CSF250 E I Input Option OtherOptions (includinglowerearth leakage)contactsales officefordetails I Q M empty No options Switched IEC ( S or E cooling only) Fast On (CSF350 only) Molex (not CSF350) Example - if you require 5.2V / 12 on a CSF350 : - a) select as closest match for voltage and current and prefix with voltage (eg 5.2) b) repeat for other outputs Ensure that the no more than 2 modules are selected.for example:- CSF350EI5/123.3L5/12Ewhich represents a five output 350W Sirius with End fan, IEC inlet with:- Output 1 = 5V / 50 Output 2 = 12V / 12 Output 3 = 3.3V / 16 (24 peak) Output 4 = 5V / 6 (9 peak) Output 5 = 12V / 4.5 (6.75 peak) 3 ContactLambdatovalidateconfigurationandissueapartnumber. Sirius Series 3

Dual o/p Module Typical Terminal Layout Single o/p Module Output 2 Output 1 Module sense connector Molex 50-37-5023 Output Connections 2 x terminals 08-70-1039 ll types 6.35mm fast on connectors Input Connection (case type dependant) 1) 6.35mm Faston. Input connectors also available 2) IEC320 connector 3) Molex 3069 series with locking ramp 1 x 5 way housing ref 09-91-0500 3 x 2478 series terminals ref 08-52-0071 or 08-52-0072 Mechanical Drawings ll dimensions in mm unless otherwise stated. General tolerance ±0.5. ir direction on all types is from outside of fan into power supply Sense + signals (CSF250 & CSF350 Versions) Molex 8 way 90142-0008 + 8 x terminals 90119-2109 1 signal return 2 inhibit 3 ac fail/reset 4 o/p 2 -sense 5 ac good/reset 6 o/p 2 +sense 7 o/p 1 sense 8 o/p 1 +sense Inhibit TTL Low or contact closure to signal return C Fail (high on fail) 5V TTL compatible output referenced to signal return. 20m max source current. C Good (low on fail) 5V TTL compatible output referenced to signal return. 20m max sink current. Standard Sirius (CS250) versions:- Molex 6 way 90142-0006 + 6 x terminals 90119-2109 1 inhibit 2 ac fail 3 o/p 2 sense 4 o/p 2 +sense 5 o/p 1 sense 6 o/p 1 +sense Inhibit TTL Low or contact closure to o/p 1 ve C Fail (high on fail) Open collector ref to o/p 1 ve, turns off on fail, max 40V 50m End Fan, case types EQ (Faston input) and EI (Switched IEC Inlet) (CSF350 Versions) 5 1 4 1 Case type EQ Case type EQ Faston C input, case types TQ (top fan), NQ (no fan, with cover), LQ (no fan, no cover) (CSF350 Versions) Earth Neutral Live Earth Neutral Live 4 Sirius Series

Molex inlet, case types TM (Top fan), NM (No fan, with cover), LM (No fan, no cover) (CS250 and CSF250 Versions) LM versions TM & NM versions Top Fan ( TM ) End Fan, case types EI (Switched IEC inlet) and EM (Molex inlet) (CS250 and CSF250 Versions) Case type EM Case type EM & EI Case type EM Single End Fan, case types SI (Switched IEC inlet) and SM (Molex inlet) (CSF250 Versions) Sirius Series 5

Document number 69652 - Rev 2.4 - Jan10 6 Sirius Series