EN Test Report

Similar documents
EN Test Report

EN Test Report

RF Exposure Evaluation Declaration

Test Report FCC Part15 Subpart C

DFS MEASUREMENT REPORT EN V1.8.1 Clause 4.7

FCC Part 22H&90S Test Report

Report No: 073L039-RFCEP17V01. Test Report. Applicant MICRO-STAR INTL Co., LTD. No. 69, Li-De St., Jung-He City, Taipei Hsien, Taiwan, R.O.C.

CE Test Report. : 45 Series Pluggable module

RF Exposure Evaluation Declaration

CE Test Report. Approved & Reviewed by: Ty: XXX. Gary Chang / Manager. Report No.: ER AN Page : 1 of 97 Report Version: Rev.

Report No.: R-RFCEP14V01. Test Report

Report No: R-RFCEP38V01. Test Report

TABLE OF CONTENTS. Report No.: BL-SZ

TEST REPORT OF THE. Inventek Systems

Dynamic Frequency Selection (DFS) Test Report FCC Part15 Subpart E

EN DFS Test Report

Test Report FCC Part15 Subpart C & RSS 247 Issue2

AS/NZS TEST REPORT. : Wireless IR Repeater System

TEST REPORT OF THE. Inventek Systems

TEST REPORT OF THE. Inventek Systems

Test Report FCC Part15 Subpart C

RED-Radio Test Report

Test Report. Wireless 11g + Bluetooth Combo MiniPCI Card. Applicant MICRO-STAR INT L CO., LTD No.69,Li-De St,Jung-He City,Taipei Hsien 235,Taiwan

Report No R-RFUSP28V01. FCC Test Report. Applicant Fluidmesh Networks, LLC Barlcay Blvd.,Buffalo Grove, IL USA

RADIO TEST REPORT (AS/NZS 4268)

CE Radio Test Report

FCC Test Report. Approved & Reviewed by: Ty: XXX. Gary Chang / Manager. Report No.: FR442904AN Page : 1 of 141 Report Version: Rev.

FCC Test Report. : Wireless Way Richmond, BC, V6V 3A4 Canada : 47 CFR FCC Part 27 Subpart L

FCC Test Report. : D-Link : DCS-8100LH : KA2CS8100LHA1

RADIO TEST REPORT (AS/NZS 4268)

FCC 47 CFR PART 15 SUBPART C INDUSTRY CANADA RSS-210 ISSUE 8 BLUETOOTH LOW ENERGY CERTIFICATION TEST REPORT FOR. 2.4GHz LE MODULE MODEL NUMBER: RN4020

FCC Test Report. : abgn M.2 module w/usb interface

Test Report. Product Name : WIRELESS ACCESS POINT

EMC Test Data. Radio Test Report R Summit Data Communications SDC-MCF10G. Test Report R76253 Rev 3.0. Revision History.

RF Test Report. Report No.: AGC EE10. TEST NAME : 1999/5/EC R&TTE Directive Art.3.2 STANDARD(S) : EN V : V1.

TEST SUMMARY Seite 2 von 31. Prüfbericht - Nr.: Test Report No ANTENNA REQUIREMENT RESULT: Pass

ETSI EN V1.6.1: 2004 TEST REPORT. For. 108M Wireless Router. Model: MR0-WR641G / MR0-WR642G. Trade Name: TP-LINK.

CE Radio Test Report

Report No: R-RFCEP14V02. Test Report. For:Intel

FCC Test Report. : N600 DB Wireless N+ Router. Standard : 47 CFR FCC Part Applicant Manufacturer

Test Report. Product Name : Wireless N Day/Night Home Network Camera Model No. : DCS-932, DCS-932L, DCS-930_A2, DCS-930L_A2 FCC ID.

Test report No. : M Page : 1 of 24 Issued date : June 30, 2017 RADIO TEST REPORT. Test Report No. : M

ETSI EN V1.6.1: 2004 TEST REPORT. For. 54M Wireless Router. Model: MR0-WR541G / MR0-WR542G, AL7954. Trade Name: TP-LINK, JensenScandinavia

Test Report. Product Name: Wireless 11g USB Adapter Model No. : MS-6826, UB54G FCC ID. : DoC

ADDENDUM TEST REPORT

FCC Test Report. Received Date : Dec. 18, Tested Date : Jan. 08 ~ Jan. 23, 2014

IC Test Report. : 3147A-M2US50NBT : abgn M.2 module w/usb interface

Test Report FCC Part15 Subpart E

Report No.: 063L107-RF-CE-P14V02-2. Test Report. MICRO-STAR INTL Co., LTD. No. 69, Li-De St., Jung-He City, Taipei Hsien, Taiwan, R.O.C.

CERTIFICATE. Issued Date: Apr. 20, 2006 Report No.: 064L079-IT-US-P01V01

Test Report. Applicant ASUSTeK COMPUTER INC. 4F, No. 150, Li-Te Rd., Peitou, Taipei, Taiwan. Date of Receipt Jan. 28, Issued Date Mar.

STUDIO TO TRANSMITTER LINKING SYSTEM

FCC Test Report. (Two models are for marketing difference)

DFS Test Report : IWAVEPORT WLM200NX : 08B005S

SPORTON International Inc.

EN RADIO Test REPORT

ELECTRICAL TESTING

FCC CFR47 PART 15 SUBPART C INDUSTRY CANADA RSS-247 ISSUE 1 BLUETOOTH LOW ENERGY CERTIFICATION TEST REPORT FOR

Test Report. Product Name : IPC Model No.

FCC Test Report. : Security Network Appliance T55-W

Test Report Version. Test Report No. Date Description. DRTFCC Sep. 12, 2014 Initial issue

CE Test Report. : abgn 1x with BT

FCC CFR47 PART 15 SUBPART C INDUSTRY CANADA RSS-GEN AND RSS-210 CERTIFICATION TEST REPORT FOR BROADCOM BLUETOOTH MODULE MODEL NUMBER: BCM92046MD

FCC Test Report. Report No.: FR AN Page : 1 of 128 Report Version: Rev. 01

CERTIFICATE. Issued Date: Apr. 02, 2009 Report No.: R-ITUSP01V01

FCC Test Report. : RV340W Dual WAN Wireless-AC VPN Router. Standard : 47 CFR FCC Part : 2400 MHz MHz

A Test Lab Techno Corp. Report Number:1410FR27

EN RF Test Report

FCC Test Report. : High Power AC1200 Plug-In Wi-Fi Range Extender : REC22P REC22PG (Different case color for marketing purpose only.

FCC C2PC Test Report

FCC TEST REPORT. According to CFR

ETSI EN V2.1.1 ( ) TEST REPORT. Shanghai Bwave Technology Co., Ltd.

CE Radio Test Report. : Texas Instruments Incorporated

CE Radio Test Report. : Texas Instruments Incorporated

DFS TEST REPORT. ADDRESS: 6F.-2, No.68, Liancheng Rd., Zhonghe Dist., New Taipei City 235, Taiwan (R.O.C.)

Page 1 of 51 Report No.: T TEST REPORT FCC ID: 2AGJ5WAP-30. In Accordance with: FCC PART 15, SUBPART C : 2015 (Section 15.

FCC Test Report RF141003E10B-1. Report No.: PY FCC ID: EX6150. Test Model: Received Date: Apr. 17, Test Date: Apr. 22 to July 21, 2015

FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of. Proware Technologies Co., Ltd. Wireless High Gain USB Adapter. Model No.

APPLICATION FOR CERTIFICATION On Behalf of Futaba Corporation Radio Control Model No.:T10CG-2.4G FCC ID:AZPT10CG-24G Brand : Futaba

R&TTE (1999/5/EC) Directive ETSI EN V1.8.1: 2012 TEST REPORT

FCC TEST REPORT (15.407)

FCC Test Report. : MXF-WLTFSM13641 : LTE Cat 6 Single-Mode Indoor CPE : WLTFSM-136ACN_384041

Test Report. Product Name : Access Point Model No.: MS-6809 FCC ID.: I4L-MS6809

MEASUREMENT REPORT FCC PART WLAN b/g/n

FCC Test Report (TR )

Electrical FOR:

FCC Test Report. Approved & Reviewed by: Ty: XXX. Along Chen / Assistant Manager. Report No.: FR Page : 1 of 46 Report Version: Rev.

TCN : RADIO EQUIPMENTS OPERATING IN THE 2.4 ghz BAND and USING SPREAD SPECTRUM MODULATION TECHNIQUES. Technical Requirements

EN RF Test Report

FCC Dynamic Frequency Selection Test Report

EXHIBIT 10 TEST REPORT. FCC Parts 2 & 24

FCC Test Report. : Dual-Band Wireless AC/N VDSL2 Bonding Gateway with USB

FCC 47 CFR PART 15 SUBPART E CERTIFICATION TEST REPORT GPON SFU. MODEL No.: 7259G, 7258G, 7257G, 7253G, 7283G FCC ID: 2AGHCHBMT03

FCC/IC Test Report. : 2AOIMOMATA1 Equipment authorization required : SDoC IC ID

FCC Test Report - LTE Band 26 (part 22)

Report No R-RFCEP39V01. Test Report. For:Intel

ETSI TR V1.1.1 ( )

TEST REPORT. For RFID READER/WRITER. In conformity with. FCC CFR 47 Part15 Subpart C

RE MIC requirements for certification. Version 2 01-July-11. Copyright 2011, Telefication

TEST REPORT. Covering the DYNAMIC FREQUENCY SELECTION (DFS) REQUIREMENTS OF. FCC Part 15 Subpart E (UNII) Xirrus Model(s): XN4

Transcription:

EN 301 893 Test Report Product Name : 1, AC1600 WLAN Telefon DSL Router Model No. : Archer VR600v; Archer VR400v Applicant : TP-Link Technologies Co., Ltd. Address : Building 24 (floors 1,3,4,5) and 28 (floors1-4) Central Science and Technology Park,Shennan Rd, Nanshan, Shenzhen,China Date of Receipt : Jan.12th, 2017 Test Date : Jan. 12th, 2017~ Mar. 01st, 2017 Issued Date : Mar. 17th, 2017 Report No. : 1712057R-RF-CE-P15V01 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by CNAS, TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification (Suzhou) Co., Ltd.

Description TABLE OF CONTENTS Page 1. General Information... 7 1.1. EUT Description... 7 1.2. 802.11 a/n/ac Antenna List... 8 1.3. Channel List... 9 1.4. Test Channel... 10 1.5. The test modes of the EUT can support:... 11 1.6. Power Setting... 12 1.7. EUT Operational Condition... 13 1.8. Mode of Operation... 14 1.9. Tested System Details... 15 1.10. Configuration of Tested System... 15 1.11. EUT Exercise Software... 16 2. Technical Test... 17 2.2. Summary of Test Result... 23 2.3. Measurement Uncertainty... 24 2.4. Test Environment... 24 3. Centre Frequencies... 25 3.1. Test Equipment... 25 3.2. Test Setup... 25 3.3. Limit... 26 3.4. Test Procedure... 26 3.5. Test Result... 27 4. Occupied Channel Bandwidth... 29 4.1. Test Equipment... 29 4.2. Test Setup... 29 4.3. Limit... 29 4.4. Test Procedure... 30 Page: 3 of 134

4.5. Test Result... 31 5. RF Output Power and Power Density... 43 5.1. Test Equipment... 43 5.2. Test Setup... 44 5.3. Limit... 44 5.4. Test Procedure... 45 5.5. Test Result... 46 6. Transmitter Unwanted Emissions Outside the 5GHz RLAN Bands... 70 6.1. Test Equipment... 70 6.2. Test Setup... 71 6.3. Limit... 72 6.4. Test Procedure... 72 6.5 Test Result... 75 7. Transmitter Unwanted Emissions Within the 5GHz RLAN Bands... 87 7.1. Test Equipment... 87 7.2. Test Setup... 87 7.3. Limit... 88 7.4. Test Procedure... 89 7.5. Test Result... 91 8. Receiver Spurious Emissions... 103 8.1. Test Equipment... 103 8.2. Test Setup... 104 8.3. Limit... 104 8.4. Test Procedure... 105 8.5. Test Result... 107 9. Adaptivity (Channel Access Mechanism)... 119 9.1. Test Equipment... 119 9.2. Test Setup... 119 9.3. Limit... 120 Page: 4 of 134

9.4. Test Procedure... 121 9.5. Test Result... 124 10. Attachment... 127 10.1. Test Photograph... 127 10.2. EUT Photograph... 130 Page: 5 of 134

History of This Test Report REPORT NO. VERSION DESCRIPTION ISSUED DATE 1712057R-RF-CE-P15V01 V1.0 Initial Issued Report Mar. 17th, 2017 Page: 6 of 134

1. General Information 1.1. EUT Description Product Name 1, AC1600 WLAN Telefon DSL Router Model No. Archer VR600v; Archer VR400v EUT Voltage 100-240V~50/60Hz 0.6A Test Voltage AC 230V/50Hz Wi-Fi Transmit modes 802.11a 802.11n(20MHz) 802.11n(40MHz) 802.11ac(20MHz) 802.11ac(40MHz) 802.11ac(80MHz) Supporting Bands 5150MHz~5250MHz 5250MHz~5350MHz 5470MHz~5725MHz With TDWR Channels Without TDWR Channels Frequency Range 802.11a/n/ac (20MHz): 5180 5240 MHz, 802.11n/ac (40MHz): 5190 5230 MHz 802.11ac (80MHz): 5210MHz Channel Number 802.11a/n/ac (20MHz): 4 802.11n/ac (40MHz): 2 802.11ac (80MHz): 1 Type of Modulation 802.11a/n/ac: OFDM-BPSK, QPSK, 16QAM, 64QAM Data Rate 802.11a: 6/9/12/18/24/36/48/54 Mbps 802.11n: up to 450 Mbps 802.11ac: up to 1.3 Gbps Note: 1. The difference of models is for different marketing requirement. 2. Archer VR600v has two versions, and only minor circuitry for non-transmitter portions(rx Filter and Hybrid Filter) changed, which has nothing effect with RF circuit. Page: 7 of 134

1.2. 802.11 a/n/ac Antenna List Antenna manufacturer N/A Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna technology SISO Basic Sectorized antenna systems Cross-polarized antennas MIMO Unequal antenna gains, with equal transmit powers Spatial Multiplexing CDD Beam-forming Antenna Type External Dipole Internal PIFA PCB Ceramic Chip Antenna Metal plate type F antenna Cross-polarize Antenna Antenna Gain #1 3dBi Antenna Gain #2 3dBi Antenna Gain #3 3dBi Beam-forming Gain 2dBi Page: 8 of 134

1.3. Channel List 802.11a/n/ac (20MHz) Working Frequency of Each Channel: Channel Frequency Channel Frequency Channel Frequency Channel Frequency 36 5180 MHz 40 5200 MHz 44 5220 MHz 48 5240 MHz 802.11n/ac (40MHz) Working Frequency of Each Channel: Channel Frequency Channel Frequency Channel Frequency Channel Frequency 38 5190 MHz 46 5230 MHz N/A N/A N/A N/A 802.11ac (80MHz) Working Frequency of Each Channel: Channel Frequency Channel Frequency Channel Frequency Channel Frequency 42 5210 MHz N/A N/A N/A N/A N/A N/A Page: 9 of 134

1.4. Test Channel Test Clause Test channels Lower sub-band (5 150 ~ 5 350 MHz) Higher sub-band (5 470 ~ 5 725 MHz) 5150 ~ 5250MHz 5250 ~ 5350MHz Centre frequencies 5.3.2 C7 (see note 1) C8 (see note 1) Occupied Channel Bandwidth 5.3.3 C7 C8 Power, power density 5.3.4 C1 C2 C3,C4 Transmitter unwanted emissions outside the 5.3.5 C7 (see note 1) C8 (see note 1) 5 GHz RLAN bands Transmitter unwanted emissions within the 5.3.6 C1 C2 C3,C4 5 GHz RLAN bands Receiver spurious emissions 5.3.7 C7 (see note 1) C8 (see note 1) Transmit Power Control 5.3.4 n.a. (see note 2) C2 (see note 1) C3, C4 (see note 1) (TPC) Dynamic Frequency 5.3.8 n.a. (see note 2) C5 C6 (see note 3) Selection (DFS) Adaptivity 5.3.9 C7 C8 C1, C3: The lowest declared channel for every declared nominal channel bandwidth within this band. For the power density testing, it is sufficient to only perform this test using the lowest nominal channel bandwidth. C2, C4: The highest declared channel for every declared nominal channel bandwidth within this band. For the power density testing, it is sufficient to only perform this test using the lowest nominal channel bandwidth. Page: 10 of 134

C5, C6: One channel out of the declared channels for this frequency range. If more than one nominal Channel bandwidth has been declared for this sub-band, testing shall be performed using the lowest and highest nominal channel bandwidth. C7, C8: One channel out of the declared channels for this sub-band. For Occupied Channel Bandwidth, testing shall be repeated for every declared nominal channel bandwidth within this sub-band. For Adaptivity, testing shall be performed using the highest nominal channel bandwidth. NOTE 1: In case of more than one channel plan has been declared, testing of these specific requirements need only be performed using one of the declared channel plans. NOTE 2: Testing is not required for nominal channel bandwidths that fall completely within the frequency range 5 150 MHz to 5 250 MHz. NOTE 3: Where the declared channel plan includes channels whose nominal channel bandwidth falls completely or partly within the 5 600 MHz to 5 650 MHz band, the tests for the Channel Availability Check (and where implemented, for the Off-Channel CAC) shall be performed on one of these channels in addition to a channel within the band 5 470 MHz to 5 600 MHz or within the band 5 650 MHz to 5 725 MHz NOTE 4: For power and TCP items: the lowest middle and highest frequency of channel were selected to test, then others items will be referenced by highest power with every nominal channel bandwidth. 1.5. The test modes of the EUT can support: Test Mode Ant 1 Ant 2 Ant 3 Ant 1+2+3 802.11a X X X 802.11n(20MHz) X X X 802.11n(40MHz) X X X 802.11ac(20MHz) X X X 802.11ac(40MHz) X X X 802.11ac(80MHz) X X X Page: 11 of 134

1.6. Power Setting Test Mode Band Test Frequency Ant 1 Ant 2 Ant 3 Ant 1+2+3 802.11a Band 1 5180 -- -- -- 46 802.11n(20MHz) Band 1 5180 -- -- -- 46 802.11n(40MHz) Band 1 5190 -- -- -- 54 802.11ac(20MHz) Band 1 5180 -- -- -- 46 802.11ac(40MHz) Band 1 5190 -- -- -- 54 802.11ac(80MHz) Band 1 5210 -- -- -- 54 802.11a Beam-forming Band 1 5180 -- -- -- 36 802.11n(20MHz) Beam-forming Band 1 5180 -- -- -- 38 802.11n(40MHz) Beam-forming Band 1 5190 -- -- -- 46 802.11ac(20MHz) Beam-forming Band 1 5180 -- -- -- 38 802.11ac(40MHz) Beam-forming Band 1 5190 -- -- -- 46 802.11ac(80MHz) Beam-forming Band 1 5210 -- -- -- 46 Page: 12 of 134

1.7. EUT Operational Condition EUT Voltage 100-240V~50/60Hz 0.6A Test Voltage AC 230V/50Hz Extreme Temperature T nom (25 ) T max (40 ) T min (0 ) Page: 13 of 134

1.8. Mode of Operation DEKRA Testing and Certification (Suzhou) Co., Ltd. has verified the construction and function in typical operation. All the test modes were carried out with the EUT setting in continuously transmitting mode with maximum duty cycle using software, except for adaptivity test which is under streaming with different modes. See the different modes shown in this test report and defined as: Test Mode Listed Mode 1: Transmit by 802.1a Mode 2: Transmit by 802.11n (20MHz) Mode 3: Transmit by 802.11n (40MHz) Mode 4: Transmit by 802.11ac (20MHz) Mode 5: Transmit by 802.11ac (40MHz) Mode 6: Transmit by 802.11ac (80MHz) Mode 7: Transmit by 802.11a with Beam-forming Mode 8: Transmit by 802.11n (20MHz) with Beam-forming Mode 9: Transmit by 802.11 n (40MHz) with Beam-forming Mode 10: Transmit by 802.11ac (20MHz) with Beam-forming Mode 11: Transmit by 802.11ac (40MHz) with Beam-forming Mode 12: Transmit by 802.11ac (80MHz) with Beam-forming Mode 13: Receive by 802.11a Mode 14: Receive by 802.11n (20MHz) Mode 15: Receive by 802.11n (40MHz) Mode 16: Receive by 802.11ac (20MHz) Mode 17: Receive by 802.11ac (40MHz) Mode 18: Receive by 802.11ac (80MHz) Mode 19: Receive by 802.11a with Beam-forming Mode 20: Receive by 802.11n (20MHz) with Beam-forming Mode 21: Receive by 802.11n (40MHz) with Beam-forming Mode 22: Receive by 802.11ac (20MHz) with Beam-forming Mode 23: Receive by 802.11ac (40MHz) with Beam-forming Mode 24: Receive by 802.11ac (80MHz) with Beam-forming Mode 25: Normal Operation by 802.11ac (80MHz) Note: 1. The extreme test condition for temperature was determined by manufacturer, see Clause 1.6. 2. The conducted items are tested by EN301893 systems. Page: 14 of 134

1.9. Tested System Details The types for all equipments, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. Power Cord 1 Notebook Asus N80V 8BN0AS226971468 Non-shielded 1.10. Configuration of Tested System Connection Diagram( Radiated set-up) Page: 15 of 134

Connection Diagram( Conducted set-up) Connection Diagram A Lan Cable Non-shielded >10m B RF Cable Non-shielded <15cm 1.11. EUT Exercise Software 1 Setup the EUT and simulators as shown on above. 2 Turn on the power of equipment. 3 Run the test software [MTool]. 4 Select the transmission mode and test channel, then start test. Page: 16 of 134

2. Technical Test 2.1. Test Information as required by ETSI EN 301 893 V1.8.1 a) The Nominal Channel Bandwidth(s): Nominal Channel Bandwidth 1:..20... MHz Nominal Channel Bandwidth 2:..40... MHz Nominal Channel Bandwidth 3:..80... MHz The associated centre frequencies: For Nominal Channel Bandwidth 1: for the band 5 150 MHz to 5 250 MHz: Reference clause 1.3 For Nominal Channel Bandwidth 2: for the band 5 150 MHz to 5 250 MHz: Reference clause 1.3 For Nominal Channel Bandwidth 3: for the band 5 150 MHz to 5 250 MHz: Reference clause 1.3 b) For equipment that support simultaneous transmissions in one or more channels: The (maximum) number of channels used for these simultaneous transmissions:..4... These channels are adjacent channels: Yes No In case of non-adjacent channels, whether or not these channels are in different sub-bands: Yes No In case of simultaneous transmissions, further information defining the channels used for these simultaneous transmissions may be required. c) The different transmit operating modes (see clause 5.1.4.2) (tick all that apply): Operating mode 1: Single Antenna Equipment a) Equipment with only 1 antenna b) Equipment with diversity antennas but only 1 antenna active at any moment in time c) Smart Antenna Systems with 2 or more antennas, but operating in a (legacy) mode where only 1 antenna is used. Operating mode 2: Smart Antenna Systems - Multiple Antennas without beamforming a) Single spatial stream/standard throughput b) High Throughput (> 1 spatial stream) using Nominal Channel Bandwidth 1 c) High Throughput (> 1 spatial stream) using Nominal Channel Bandwidth 2 Operating mode 3: Smart Antenna Systems - Multiple Antennas with beamforming a) Single spatial stream/standard throughput b) High Throughput (> 1 spatial stream) using Nominal Channel Bandwidth 1 c) High Throughput (> 1 spatial stream) using Nominal Channel Bandwidth 2 d) In case of Smart Antenna Systems or multiple antenna systems: Page: 17 of 134

The number of Receive chains:..3... The number of Transmit chains:..3... Equal power distribution among the transmit chains: Yes No In case of beamforming, the maximum (additional) beamforming gain:...2... db NOTE: Beamforming gain does not include the basic gain of a single antenna (assembly). e) TPC feature available: Yes No f) For equipment with TPC range: The lowest and highest power level (or lowest and highest e.i.r.p. level in case of integrated antenna equipment), intended antenna assemblies and corresponding operating frequency range for the TPC range (or for each of the TPC ranges if more than one is implemented). TPC range 1: Applicable Frequency Range: 5 150 MHz to 5 350 MHz and 5 470 MHz to 5 725 MHz (Indoor) Simultaneous transmissions in both sub-bands: Yes No 5 470 MHz to 5 725 MHz only (Outdoor only) Indicate whether the power levels specified are Transmitter Output Power levels or e.i.r.p. levels in case of integrated antenna equipment. Power levels are specified for: TX out e.i.r.p If more than one transmit chain is present (e.g. in the case of smart antenna systems), the power levels below represent the power settings per active transmit chain (and per sub-band in case of simultaneous transmissions). Table F.1: Power levels for TPC range 1(Clause 1.6) Sub-band (MHz) Operating Mode 1 (dbm) Operating Mode 2 (dbm) Operating Mode 3 (dbm) Lowest setting 5 150 to 5 350 5 470 to 5 725 Highest setting 5 150 to 5 350 5 470 to 5 725 Beamforming possible: Yes No Intended Antenna Assemblies: Table F.2: Intended Antenna Assemblies for TPC range 1 Antenna Antenna Operating Sub-band Beam Assembly Gain Mode (MHz) forming e.i.r.p. for e.i.r.p. for Plow Phigh name (dbi) gain (dbm) (dbm) Page: 18 of 134

(db) <Antenna 1> Mode 1 5150-5350 5470-5725 Mode 2 5150-5350 5470-5725 Mode 3 5150-5350 5470-5725 <Antenna 1> Mode 1 5150-5350 5470-5725 Mode 2 5150-5350 5470-5725 Mode 3 5150-5350 5470-5725 <Antenna 1> Mode 1 5150-5350 5470-5725 Mode 2 5150-5350 5470-5725 Mode 3 5150-5350 5470-5725 DFS Threshold level:... dbm at the antenna connector in front of the antenna g) For equipment without a TPC range: Power Setting 1: Applicable Frequency Range: 5 150 MHz to 5 350 MHz and 5 470 MHz to 5 725 MHz (Indoor) Simultaneous transmissions in both sub-bands: Yes No 5 470 MHz to 5 725 MHz only (Outdoor only) Indicate whether the power levels specified are Transmitter Output Power levels or e.i.r.p. levels in case of integrated antenna equipment. Power levels are specified for: TX out e.i.r.p If more than one transmit chain is present (e.g. in the case of smart antenna systems), the power levels below represent the power settings per active transmit chain (and per sub-band in case of simultaneous transmissions). Table F.5: Maximum Transmitter Output Power for Power Setting 1 Page: 19 of 134

Sub-band (MHz) Operating Mode 1 (dbm) Operating Mode 2 (dbm) Operating Mode 3 (dbm) 5 150 to 5 350 5 470 to 5 725 Beamforming possible: Yes No Intended Antenna Assemblies: Table F.6: Intended Antenna Assemblies for Power Setting 1(Clause 1.6) Antenna Assembly Antenna Gain Operating Mode Sub-band (MHz) Beam forming e.i.r.p. (dbm) name (dbi) gain (db) <Antenna 1> Mode 1 5150-5350 5470-5725 Mode 2 5150-5350 5470-5725 Mode 3 5150-5350 5470-5725 <Antenna 1> Mode 1 5150-5350 5470-5725 Mode 2 5150-5350 5470-5725 Mode 3 5150-5350 5470-5725 <Antenna 1> Mode 1 5150-5350 5470-5725 Mode 2 5150-5350 5470-5725 Mode 3 5150-5350 5470-5725 DFS Threshold level:... dbm at the antenna connector in front of the antenna h) The DFS related operating mode(s) of the equipment: Master Slave with radar detection Slave without radar detection If the equipment has more than one operating mode, tick all that apply. Page: 20 of 134

i) User access restrictions (please check box below to confirm): the equipment is constructed to comply with the requirements contained in clause 4.10 in ETSI EN 301 893 V1.8.1. j) For equipment with Off-Channel CAC functionality: The equipment has an "Off-Channel CAC" function Yes No If yes, specify the "Off-Channel CAC Time" For channels outside the 5 600 MHz to 5 650 MHz range:... hours If applicable, for channels (partially) within the 5 600 MHz to 5 650 MHz range:... hours k) The equipment can operate in ad-hoc mode: no ad-hoc operation ad-hoc operation in the frequency range 5 150 MHz to 5 250 MHz without DFS ad-hoc operation with DFS If more than 1 is applicable, tick all that apply. l) Operating Frequency Range(s): Range 1: 5 150 MHz to 5 350 MHz and 5 470 MHz to 5 725 MHz Range 2: 5 470 MHz to 5 725 MHz Range 3: 5 150 MHz to 5 250 MHz (ad-hoc without DFS) Range 4: other, please specify: 5 150 MHz to 5 250 MHz (AP) m) The extreme operating temperature and supply voltage range that apply to the equipment: -20 C to +55 C (Outdoor & Indoor usage) 0 C to +35 C (Indoor usage only) Other:... 0 C to +40 C... The supply voltages of the stand-alone radio equipment or the supply voltages of the combined (host) equipment or test jig in case of plug-in devices: Details provided are for the: stand-alone equipment combined (or host) equipment test jig Supply Voltage AC mains State AC voltage: Minimum: AC 207V Nominal:. AC 230V.. Maximum:.AC 252V.. DC State DC voltage Minimum: Nominal:... Maximum:... In case of DC, indicate the type of power source: Internal Power Supply External Power Supply or AC/DC adapter Battery Nickel Cadmium Alkaline Nickel-Metal Hydride Page: 21 of 134

Lithium-Ion Lead acid (Vehicle regulated) Other... n) The test sequence/test software used (see also ETSI EN 301 893 (V1.8.1), clause 5.1.2):......... o) Type of Equipment: Stand-alone Combined Equipment (Equipment where the radio part is fully integrated within another type of equipment) Plug-in radio device (Equipment intended for a variety of host systems) Other... p) Adaptivity (Channel Access Mechanism): Frame Based Equipment Load Based Equipment Option A Load Based Equipment Option B Specify which protocol has been implemented: IEEE 802.11 Other:... q) The CCA time implemented by the equipment: 750 s. In case of Load Based Equipment implementing Option B (see clause 4.8.3.2) the value q: Page: 22 of 134

2.2. Summary of Test Result No deviations from the test standards Deviations from the test standards as below description: Rule: ETSI EN 301893 V 1.8.1(2015-03) Rule Chapter Worst data Test Result 4.2 Carrier Frequencies Mode: Carrier Wave Pass 4.3 Nominal Channel Bandwidth and Mode 12 Pass Occupied Channel Bandwidth 4.4 RF Output Power and Power Density Mode 11 Pass 4.5.1 Transmitter Unwanted Emissions Outside Mode 8 Pass the 5GHz RLAN Bands 4.5.2 Transmitter Unwanted Emissions Within Mode 5 Pass the 5GHz RLAN Bands 4.6 Receiver Spurious Emissions Mode 23 Pass 4.7 Dynamic Frequency Selection (DFS) N/A N/A 4.8 Adaptivity (Channel Access Mechanism) Mode 25 Pass 4.9 User Access Restrictions N/A N/A 4.10 Geo-location capability N/A N/A Page: 23 of 134

2.3. Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the apparatus: Parameter Uncertainty Radio Frequency 1 x 10-5 RF Power Conducted 1.5dB RF Power Radiated 6dB Spurious Emissions, Conducted 3dB Spurious Emissions, Radiated 6dB Humidity 5% Temperature 1 Time 10% 2.4. Test Environment Items Required (IEC 68-1) Actual Temperature ( C) 0-40 25 Humidity (%RH) 25-75 50 Barometric pressure (mbar) 860-1060 950-1000 Page: 24 of 134

3. Centre Frequencies 3.1. Test Equipment Centre Frequencies /TR-8 Instrument Manufacturer Type No. Serial No. Cali. Due Date Spectrum Analyzer Agilent N9010A MY48030494 2018.01.14 DC Power Supply IDRC CD-035-020PR 977272 2017.09.04 Programmable Temperature & Humidity Gaoyu TH-1P-B WIT-05121302 2018.01.04 Chamber Temperature/Humidity Meter Zhichen ZC1-2 TR8-TH 2017.04.10 Note: All equipments are calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. 3.2. Test Setup For Conducted Measurement Page: 25 of 134

3.3. Limit Centre Frequencies The actual centre frequency for any given channel declared by the manufacturer shall be maintained within the range f c 20ppm. 3.4. Test Procedure Test Method References Rule Chapter Description ETSI EN 301 893 V1.8.1 5.3.2 Centre frequencies Equipment operating without modulation 1, This test method requires that the UUT can be operated in an unmodulated test mode. 2, The UUT shall be connected to a suitable frequency measuring device (e.g. a frequency counter or a spectrum analyser) and operated in an unmodulated mode. 3,The result shall be recorded. Equipment operating with modulation 1,This method is an alternative to the above method in case the UUT cannot be operated in an un-modulated mode. 2, The UUT shall be connected to spectrum analyser. 3, Max Hold shall be selected and the centre frequency adjusted to that of the UUT. 4, The peak value of the power envelope shall be measured and noted. The span shall be reduced and the marker moved in a positive frequency increment until the upper, (relative to the centre frequency), -10 dbc point is reached. This value shall be noted as f1. 5, The marker shall then be moved in a negative frequency increment until the lower, (relative to the centre frequency), -10 dbc point is reached. This value shall be noted as f2. 6, The centre frequency is calculated as (f1 + f2) / 2. Radiated measurement 1,The test set up as described in annex B shall be used with a spectrum analyser of sufficient accuracy attached to the test antenna (see clause 5.2). 2, The test procedure is as described under clause 5.3.2.2.1. Page: 26 of 134

3.5. Test Result Product : 1, AC1600 WLAN Telefon DSL Router : Centre Frequencies : TR-8 Test Mode : Mode 1: Transmit by 802.1a Test Conditions Measured Carrier Frequency F Limit Frequency (MHz) (ppm) (ppm) (MHz) Tnom (25 ) Vnom (AC 230V) 5180 5180.00 0.00 20 Tmax (40 ) Vmax (AC 253V) 5180 5179.96 7.72 20 Tmax (40 ) Vmin (AC 207V) 5180 5179.98 3.86 20 Tmin (0 ) Vmax (AC 253V) 5180 5179.95 9.65 20 Tmin (0 ) Vmin (AC 207V) 5180 5179.96 7.72 20 Note 1: The channel should be referenced by clause 1.4 Note 2: The worst data as below: Page: 27 of 134

Frequency(MHz) Page: 28 of 134

4. Occupied Channel Bandwidth 4.1. Test Equipment Occupied Channel Bandwidth/ TR-8 Instrument Manufacturer Type No. Serial No. Cal. Due Date Spectrum Analyzer Agilent N9010A MY48030494 2018.01.14 Temperature/Humidity Meter Zhichen ZC1-2 TR8-TH 2017.04.10 Note: All equipments are calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. 4.2. Test Setup For Conducted Measurement 4.3. Limit Occupied Channel Bandwidth The Nominal Channel Bandwidth shall be at least 5 MHz at all times. The Occupied Channel Bandwidth shall be between 80 % and 100 % of the declared Nominal Channel Bandwidth. In case of smart antenna systems (devices with multiple transmit chains) each of the transmit chains shall meet this requirement. NOTE: During an established communication, a device is allowed to operate temporarily in a mode where its Occupied Channel Bandwidth may be reduced to as low as 80 % of its Nominal Channel Bandwidth with a minimum of 4 MHz. Page: 29 of 134

4.4. Test Procedure Test Method References Rule Chapter Description ETSI EN 301 893 V1.8.1 5.3.3 Occupied Channel Bandwidth Step 1 Connect the UUT to the spectrum analyser and use the following settings: 1) Centre Frequency: The centre frequency of the channel under test 2) Resolution Bandwidth: 100 khz 3) Video Bandwidth: 300 khz 4) Frequency Span: 2 Nominal Bandwidth (e.g. 40 MHz for a 20 MHz channel) 5) Sweep time: > 1 s; for larger Nominal Bandwidths, the sweep time may be increased until a value where the sweep time has no impact on the RMS value of the signal 6) Detector Mode: RMS 7) Trace Mode: Max Hold Step 2 Wait for the trace to stabilize. Step 3 1) Make sure that the power envelope is sufficiently above the noise floor of the analyser to avoid the noise signals left and right from the power envelope being taken into account by this measurement. 2) Use the 99 % bandwidth function of the spectrum analyser to measure the Occupied Channel Bandwidth of the UUT. This value shall be recorded. 3) The measurement described in step 1 to step 3 above shall be repeated in case of simultaneous transmissions in non-adjacent channels. Radiated measurement The test set up as described in annex B and the applicable measurement procedures described in annex C shall be used. The test procedure is as described under clause 5.3.3.2.1. Page: 30 of 134

4.5. Test Result Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 1: Transmit by 802.11a Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5180 16.452 16~20 20 82.26% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 36(5180MHz) Page: 31 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 2: Transmit by 802.11n(20MHz) Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5180 17.642 16~20 20 88.21% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 36(5180MHz) Page: 32 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 3: Transmit by 802.11n(40MHz) Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5190 36.227 32~40 40 90.56% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 38(5190MHz) Page: 33 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 4: Transmit by 802.11ac(20MHz) Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5180 17.652 16~20 20 88.26% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 36(5180MHz) Page: 34 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 5: Transmit by 802.11ac(40MHz) Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5190 36.223 32~40 40 90.56% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 38(5190MHz) Page: 35 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 6: Transmit by 802.11ac(80MHz) Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5210 75.726 64~80 80 94.65% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 42(5210MHz) Page: 36 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 7: Transmit by 802.11a with Beam-forming Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5180 16.441 16~20 20 82.21% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 36(5180MHz) Page: 37 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 8: Transmit by 802.11n(20MHz) with Beam-forming Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5180 17.636 16~20 20 88.18% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 36(5180MHz) Page: 38 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 9: Transmit by 802.11n(40MHz) with Beam-forming Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5190 36.234 32~40 40 90.56% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 38(5190MHz) Page: 39 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 10: Transmit by 802.11ac(20MHz) with Beam-forming Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5180 17.650 16~20 20 88.25% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 36(5180MHz) Page: 40 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 11: Transmit by 802.11ac(40MHz) with Beam-forming Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5190 36.229 32~40 40 90.57% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 38(5190MHz) Page: 41 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Occupied Channel Bandwidth : TR-8 Test Mode : Mode 12: Transmit by 802.11ac(80MHz) with Beam-forming Declared Occupied Occupied Nominal Frequency Channel Limit Channel Limit Channel (MHz) Bandwidth (MHz) Bandwidth (%) Bandwidth (MHz) (%) (MHz) 5210 75.750 64~80 80 94.69% 80-100 Note 1: The Test mode and channel should be referenced by clause 1.4. Note 2: We have evaluated all antennas, shown the worst case as below. Channel 42(5210MHz) Page: 42 of 134

5. RF Output Power and Power Density 5.1. Test Equipment RF Output Power, Transmit Power Control (TPC) and Power Density / TR-8 Instrument Manufacturer Type No. Serial No. Cal. Due Date Power Meter Anritsu ML2495A 0905006 2017.10.18 Power Sensor Anritsu MA2411B 0846014 2017.10.18 DC Power Supply IDRC CD-035-020PR 977272 2017.09.04 Programmable Temperature Gaoyu & Humidity Chamber TH-1P-B WIT-05121302 2018.01.04 Temperature/Humidity Meter Zhichen ZC1-2 TR8-TH 2017.04.10 EN 300328 Test system (V3.160113) Instrument Manufacturer Type No. Serial No. Cali. Due Date X-series USB Peak and Agilent Average Power Sensor U2021XA MY54080020 2017.06.25 X-series USB Peak and Agilent Average Power Sensor U2021XA MY54110001 2017.06.25 X-series USB Peak and Agilent Average Power Sensor U2021XA MY53480008 2017.06.25 X-series USB Peak and Agilent Average Power Sensor U2021XA MY54080019 2017.06.25 4 Ch.Simultaneous Sampling 14 Bits 2 MS/s Agilent U2531A TW54063507 N/A 4 Ch.Simultaneous Sampling 14 Bits 2 MS/s Agilent U2531A TW54063513 N/A Note: All equipments are calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. Page: 43 of 134

5.2. Test Setup For Conducted Measurement 5.3. Limit Mean EIRP limits for RF Output Power and Power Density at the Highest Power Level Frequency Range Mean EIRP Limit [dbm] Mean EIRP Density Limit [dbm/mhz] with TPC without TPC with TPC without TPC 5150 MHz to 5350 23 20/23 (see note 1) 10 7/10 (see note 2) MHz 5470 MHz to 5725 MHz 30 (see note 3) 27 (see note 3) 17 (see note 3) 14 (see note 3) NOTE 1: The applicable limit is 20 dbm, except for transmissions whose nominal bandwidth falls completely within the band 5150 MHz to 5250 MHz, in which case the applicable limit is 23 dbm. NOTE 2: The applicable limit is 7dBm/MHz, except for transmissions whose nominal bandwidth falls completely within the band 5 150 MHz to 5 250 MHz, in which case the applicable limit is 10 dbm/mhz. NOTE 3: Slave devices without a Radar Interference Detection function shall comply with the limits for the band 5250 MHz to 5350 MHz. Page: 44 of 134

Mean EIRP Limits for RF Output Power at the Lowest Power Level of the TPC Range Frequency Range Mean EIRP [dbm] 5250 MHz to 5350 MHz 17 5470 MHz to 5725 MHz 24 (see note) Note: Slave devices without a Radar Interference Detection function shall comply with the limits for the band 5250 MHz to 5350 MHz. 5.4. Test Procedure References Rule Chapter Description ETSI EN 301 893 V1.8.1 5.3.4 RF output power, Transmit Power Control (TPC) and power density RF output power at the highest power - PH: Option 1: For equipment with continuous transmission capability or for equipment operating (or with the capability to operate) with a constant duty cycle (e.g. Frame Based equipment): Option 2: For equipment without continuous transmission capability and operating (or with the capability to operate) in only one sub-band Option 3: For equipment without continuous transmission capability and having simultaneous transmissions in both sub-bands RF output power at the lowest power level of the TPC range - PL: Option 1: For equipment with continuous transmission capability or for equipment operating (or with the capability to operate) with a constant duty cycle (e.g. Frame Based equipment): Option 2: For equipment without continuous transmission capability and operating (or with the capability to operate) in only one sub-band Option 3: For equipment without continuous transmission capability and having simultaneous transmissions in both sub-bands Power density: Option 1: For equipment with continuous transmission capability or for equipment operating (or with the capability to operate) with a constant duty cycle (e.g. Frame Based equipment): Option 2: For equipment without continuous transmission capability and operating (or with the capability to operate) in only one sub-band Option 3: For equipment without continuous transmission capability and having simultaneous transmissions in both sub-bands Page: 45 of 134

5.5. Test Result Product : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 Test Mode : Mode 1: Transmit by 802.11a Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5180 13.96 13.42 13.35 18.36 21.36 23 Vmax Tmax (40 ) (AC 253V) 5180 13.84 13.37 13.28 18.27 21.27 23 Vmin Tmax (40 ) (AC 207V) 5180 13.89 13.42 13.31 18.32 21.32 23 Tmin (0 ) Vmax (AC 253V) 5180 14.38 13.84 13.76 18.77 21.77 23 Tmin (0 ) Vmin (AC 207V) 5180 14.44 13.87 13.83 18.83 21.83 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 46 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 2: Transmit by 802.11n(20MHz) Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5180 14.03 13.47 13.33 18.39 21.39 23 Vmax Tmax (40 ) (AC 253V) 5180 13.66 13.18 13.05 18.08 21.08 23 Vmin Tmax (40 ) (AC 207V) 5180 13.68 13.25 13.09 18.12 21.12 23 Tmin (0 ) Vmax (AC 253V) 5180 14.44 13.79 13.82 18.80 21.80 23 Tmin (0 ) Vmin (AC 207V) 5180 14.47 13.81 13.86 18.83 21.83 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 47 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 3: Transmit by 802.11n(40MHz) Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5190 14.93 14.52 14.48 19.42 22.42 23 Vmax Tmax (40 ) (AC 253V) 5190 14.73 14.28 14.21 19.18 22.18 23 Vmin Tmax (40 ) (AC 207V) 5190 14.77 14.33 14.27 19.23 22.23 23 Tmin (0 ) Vmax (AC 253V) 5190 15.36 14.85 14.91 19.82 22.82 23 Tmin (0 ) Vmin (AC 207V) 5190 15.41 14.88 14.94 19.85 22.85 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 48 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 4: Transmit by 802.11ac(20MHz) Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5180 14.07 13.58 13.44 18.48 21.48 23 Vmax Tmax (40 ) (AC 253V) 5180 13.92 13.43 13.47 18.38 21.38 23 Vmin Tmax (40 ) (AC 207V) 5180 13.97 13.48 13.51 18.43 21.43 23 Tmin (0 ) Vmax (AC 253V) 5180 14.51 13.96 13.87 18.89 21.89 23 Tmin (0 ) Vmin (AC 207V) 5180 14.55 13.98 13.92 18.93 21.93 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 49 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 5: Transmit by 802.11ac(40MHz) Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5190 15.19 14.73 14.82 19.69 22.69 23 Vmax Tmax (40 ) (AC 253V) 5190 14.97 14.49 14.44 19.41 22.41 23 Vmin Tmax (40 ) (AC 207V) 5190 15.04 14.52 14.48 19.46 22.46 23 Tmin (0 ) Vmax (AC 253V) 5190 15.24 15.04 15.06 19.89 22.89 23 Tmin (0 ) Vmin (AC 207V) 5190 15.29 15.06 15.08 19.92 22.92 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 50 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 6: Transmit by 802.11ac(80MHz) Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5210 15.08 14.85 14.93 19.73 22.73 23 Vmax Tmax (40 ) (AC 253V) 5210 15.02 14.64 14.58 19.52 22.52 23 Vmin Tmax (40 ) (AC 207V) 5210 15.08 14.67 14.61 19.56 22.56 23 Tmin (0 ) Vmax (AC 253V) 5210 15.13 15.02 15.07 19.84 22.84 23 Tmin (0 ) Vmin (AC 207V) 5210 15.17 15.06 15.12 19.89 22.89 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 51 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 7: Transmit by 802.11a with Beam-forming Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Beam-forming Gain = 2 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5180 11.53 11.01 10.92 15.93 20.93 23 Vmax Tmax (40 ) (AC 253V) 5180 11.36 10.84 10.81 15.78 20.78 23 Vmin Tmax (40 ) (AC 207V) 5180 11.41 10.87 10.85 15.82 20.82 23 Tmin (0 ) Vmax (AC 253V) 5180 11.85 11.38 11.24 16.27 21.27 23 Tmin (0 ) Vmin (AC 207V) 5180 11.88 11.42 11.29 16.31 21.31 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 52 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 8: Transmit by 802.11n(20MHz) with Beam-forming Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Beam-forming Gain = 2 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5180 12.09 11.62 11.49 16.51 21.51 23 Vmax Tmax (40 ) (AC 253V) 5180 11.63 11.24 11.07 16.09 21.09 23 Vmin Tmax (40 ) (AC 207V) 5180 11.66 11.27 11.13 16.13 21.13 23 Tmin (0 ) Vmax (AC 253V) 5180 12.42 11.83 11.87 16.82 21.82 23 Tmin (0 ) Vmin (AC 207V) 5180 12.44 11.85 11.91 16.85 21.85 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 53 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 9: Transmit by 802.11n(40MHz) with Beam-forming Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Beam-forming Gain = 2 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5190 12.97 12.56 12.52 17.46 22.46 23 Vmax Tmax (40 ) (AC 253V) 5190 12.77 12.33 12.25 17.23 22.23 23 Vmin Tmax (40 ) (AC 207V) 5190 12.79 12.38 12.27 17.26 22.26 23 Tmin (0 ) Vmax (AC 253V) 5190 13.32 12.86 12.85 17.79 22.79 23 Tmin (0 ) Vmin (AC 207V) 5190 13.36 12.87 12.89 17.81 22.81 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 54 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 10: Transmit by 802.11ac(20MHz) with Beam-forming Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Beam-forming Gain = 2 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5180 12.07 11.59 11.54 16.51 21.51 23 Vmax Tmax (40 ) (AC 253V) 5180 11.96 11.48 11.53 16.43 21.43 23 Vmin Tmax (40 ) (AC 207V) 5180 11.98 11.52 11.57 16.47 21.47 23 Tmin (0 ) Vmax (AC 253V) 5180 12.54 11.93 11.91 16.91 21.91 23 Tmin (0 ) Vmin (AC 207V) 5180 12.58 11.97 11.94 16.94 21.94 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 55 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 11: Transmit by 802.11ac(40MHz) with Beam-forming Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Beam-forming Gain = 2 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5190 13.14 12.78 12.86 17.70 22.70 23 Vmax Tmax (40 ) (AC 253V) 5190 12.94 12.56 12.41 17.41 22.41 23 Vmin Tmax (40 ) (AC 207V) 5190 12.96 12.58 12.47 17.45 22.45 23 Tmin (0 ) Vmax (AC 253V) 5190 13.28 13.07 13.01 17.89 22.89 23 Tmin (0 ) Vmin (AC 207V) 5190 13.32 13.11 13.05 17.93 22.93 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 56 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : RF Output Power : TR-8 : Mode 12: Transmit by 802.11ac(80MHz) with Beam-forming Antenna #1 Gain = 3 dbi Antenna #2 Gain = 3 dbi Antenna #3 Gain = 3 dbi Beam-forming Gain = 2 dbi Test Conditions Measured Power Total Measured RF Output Frequency Limit (dbm) Power Power (MHz) (dbm) Ant 1 Ant 2 Ant 3 (dbm) (dbm) Vnom Tnom (25 ) (AC 230V) 5210 13.04 12.81 12.97 17.71 22.71 23 Vmax Tmax (40 ) (AC 253V) 5210 12.98 12.68 12.62 17.53 22.53 23 Vmin Tmax (40 ) (AC 207V) 5210 13.04 12.71 12.66 17.58 22.58 23 Tmin (0 ) Vmax (AC 253V) 5210 13.15 13.04 13.12 17.87 22.87 23 Tmin (0 ) Vmin (AC 207V) 5210 13.17 13.08 13.16 17.91 22.91 23 Note 1: EIRP=Measured Power + Antenna Gain Note 2: The Test mode and channel should be referenced by clause 1.4. Page: 57 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 Test Mode : Mode 1: Transmit by 802.11a Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5180 9.84 10 Channel 36(5180MHz) Page: 58 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 2: Transmit by 802.11n(20MHz) Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5180 9.74 10 Channel 36(5180MHz) Page: 59 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 3: Transmit by 802.11n(40MHz) Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5190 7.51 10 Channel 38(5190MHz) Page: 60 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 4: Transmit by 802.11ac(20MHz) Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5180 9.8 10 Channel 36(5180MHz) Page: 61 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 5: Transmit by 802.11ac(40MHz) Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5190 7.75 10 Channel 38(5190MHz) Page: 62 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 6: Transmit by 802.11ac(80MHz) Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5210 5.36 10 Channel 42(5210MHz) Page: 63 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 7: Transmit by 802.11a with Beam-forming Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5180 9.57 10 Channel 36(5180MHz) Page: 64 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 8: Transmit by 802.11n(20MHz) with Beam-forming Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5180 9.88 10 Channel 36(5180MHz) Page: 65 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 9: Transmit by 802.11n(40MHz) with Beam-forming Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5190 7.56 10 Channel 38(5190MHz) Page: 66 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 10: Transmit by 802.11ac(20MHz) with Beam-forming Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5180 9.88 10 Channel 36(5180MHz) Page: 67 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 11: Transmit by 802.11ac(40MHz) with Beam-forming Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5190 7.79 10 Channel 38(5190MHz) Page: 68 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Maximum Spectral Power Density : TR-8 : Mode 12: Transmit by 802.11ac(80MHz) with Beam-forming Frequency (MHz) Total Power Density (dbm/mhz) Limit (dbm/mhz) 5210 5.36 10 Channel 42(5210MHz) Page: 69 of 134

6. Transmitter Unwanted Emissions Outside the 5GHz RLAN Bands 6.1. Test Equipment Transmitter unwanted emissions in the spurious domain / AC-6 Instrument Manufacturer Type No. Serial No. Cal. Due Date Spectrum Analyzer Agilent N9010A MY48030494 2018.01.14 Spectrum Analyzer Agilent E4440A MY49420184 2018.01.14 PSG Analog S.G. Agilent E8257D MY44321116 2017.03.10 Preamplifier chengyi EMC012645SE 980262 2017.06.13 Bilog Antenna Schaffner CBL6112B 2932 2017.09.24 Half Wave Tuned Dipole COM-POWER Antenna AD-100 40137 2017.07.26 Broad-Band Horn Schwarzbeck Antenna BBHA9120D 737 2017.03.06 Filter Banks QuieTek QTK-FB AC6-FB 2017.05.03 Temperature/Humidity Meter zhichen ZC1-2 AC6-TH 2018.01.05 Note: All equipments are calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. Page: 70 of 134

6.2. Test Setup Transmitter unwanted emissions in the spurious domain / AC-6 (Below 1G) Transmitter unwanted emissions in the spurious domain / AC-6 (Above 1G) Page: 71 of 134

6.3. Limit Transmitter unwanted emission limits outside the 5 GHz RLAN bands 6.4. Test Procedure Test Method References Rule Chapter Description ETSI EN 301 893 V1.8.1 5.3.5 Transmitter unwanted emissions outside the 5 GHz RLAN bands Step 1 The sensitivity of the spectrum analyser should be such that the noise floor is at least 12 db below the limits given in clause 4.5.1.2, table 3. Step 2 1,The unwanted emissions over the range 30 MHz to 1 000 MHz shall be identified. 2,Spectrum analyser settings: 1)Resolution bandwidth: 100 khz 2)Video bandwidth: 300 khz 3)Detector mode: Peak 4)Trace Mode: Max Hold 5)Sweep Points: 9 700 For spectrum analysers not supporting this number of sweep points, the frequency band may be segmented. For spectrum analysers capable of supporting twice this number of sweep points, the frequency adjustment in clause 5.3.5.2.1.2 (step 1, last bullet) may be omitted. Page: 72 of 134

5) Sweep time: For non-continuous transmissions (duty cycle less than 100 %), the sweep time shall be sufficiently long, such that for each 100 khz frequency step, the measurement time is greater than two transmissions of the UUT. EXAMPLE: For non-continuous transmissions, if the UUT is using a test sequence as described in clause 5.1.2.1 with a transmitter on + off time of 2 ms, then the sweep time has to be greater than 4 ms per 100 khz. 3,Allow the trace to stabilize. Any emissions identified that have a margin of less than 6 db with respect to the limits given in clause 4.5.1.2, table 3 shall be individually measured using the procedure in clause 5.3.5.2.1.2 and compared to the limits given in clause 4.5.1.2, table 3. Step 3 1, The unwanted emissions over the range 1 GHz to 26 GHz shall be identified. 2, Spectrum analyser settings: 1) Resolution bandwidth: 1 MHz 2) Video bandwidth: 3 MHz 3) Detector mode: Peak 4)Trace Mode: Max Hold 5)Sweep points: 25 000 For spectrum analysers not supporting this number of sweep points, the frequency band may be segmented. For spectrum analysers capable of supporting twice this number of sweep points, the frequency adjustment in clause 5.3.5.2.1.2 (step 1, last bullet) may be omitted. 6)Sweep time: For non-continuous transmissions (duty cycle less than 100 %), the sweep time shall be sufficiently long, such that for each 1 MHz frequency step, the measurement time is greater than two transmissions of the UUT. EXAMPLE: For non-continuous transmissions, if the UUT is using a test sequence as described in clause 5.1.2.1 with a transmitter on + off time of 2 ms, then the sweep time has to be greater than 4 ms per 1 MHz. 3, Allow the trace to stabilize. Any emissions identified that have a margin of less than 6 db with respect to the limits given in clause 4.5.1.2, table 3 shall be individually measured using the procedure in clause 5.3.5.2.1.2 and compared to the limits given in clause 4.5.1.2, table 3. Step 4 1, The level of the emissions shall be measured in the time domain, using the following spectrum analyser settings: 1)Centre Frequency: Frequency of emission identified during the pre-scan 2)RBW: 100 khz (< 1 GHz) / 1 MHz (> 1 GHz) 3)VBW: 300 khz (< 1 GHz) / 3 MHz (> 1 GHz) 4)Frequency Span: 0 Hz 5)Sweep mode: Single Sweep Page: 73 of 134

6) Sweep Time: Suitable to capture one transmission burst. Additional measurements may be needed to identify the length of the transmission burst. In case of continuous signals, the Sweep Time shall be set to 30 ms 7) Sweep points: Sweeptime [μs] / 1 μs with a maximum of 30 000 8) Trigger: Video (burst signals) or Manual (continuous signals) 9) Detector: RMS 10) Trace Mode: Clear/Write 2, Adjust the centre frequency (fine tune) to capture the highest level of one burst of the emission to be measured. This fine tuning can be omitted for spectrum analysers capable of supporting twice this number of sweep points required in step 2 and step 3 from the pre-scan procedure in clause 5.3.5.2.1.1. Step 5 1, Adjust the trigger level to select the transmissions with the highest power level. 2, Set a window (start and stop lines) to match with the start and end of the burst and in which the RMS power shall be measured using the Time Domain Power function. If the spurious emission to be measured is a continuous signal, the measurement window shall be set to match the start and stop times of the sweep. 3, Select RMS power to be measured within the selected window and note the result which is the RMS power of this particular spurious emission. Compare this value with the applicable limit provided by clause 4.5.1.2, table 3. Repeat this procedure for every emission identified during the pre-scan. The values and corresponding frequencies shall be recorded. In case of conducted measurements on smart antenna systems (equipment with multiple transmit chains), the measurements shall be repeated for each of the active transmit chains. Comparison with the applicable limits shall be done using either of the options given below: 4, Option 1: the results for each of the transmit chains for the corresponding 1 MHz segments shall be added and compared with the limits provided by table 3 in clause 4.5.1.2. 5, Option 2: the results for each of the transmit chains shall be individually compared with the limits provided by table 3 in clause 4.5.1.2 after these limits have been reduced by 10 log10 (Tch) (number of active transmit chains). Page: 74 of 134

6.5 Test Result Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 1: Transmit by 802.11a with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 122.6 H -73.9-36 -37.9 PK 151.1 V -74.9-36 -38.9 PK 463.7 H -73.2-36 -37.2 PK 296.7 V -72.1-36 -36.1 PK 10360.0 H -48.3-30 -18.3 PK 10360.0 V -46.5-30 -16.5 PK 15540.0 H -48.3-30 -18.3 PK 15540.0 V -45.5-30 -15.5 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 75 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 2: Transmit by 802.11n(20MHz) with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 132.8 H -74.4-36 -38.4 PK 119.5 V -71.6-36 -35.6 PK 321.4 H -73.6-36 -37.6 PK 250.9 V -71.1-36 -35.1 PK 10360.0 H -45.6-30 -15.6 PK 10360.0 V -49.4-30 -19.4 PK 15540.0 H -49.0-30 -19.0 PK 15540.0 V -49.3-30 -19.3 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 76 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 3: Transmit by 802.11n(40MHz) with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 38 (5190MHz) 128.6 H -73.1-36 -37.1 PK 160.2 V -72.8-36 -36.8 PK 395.0 H -73.5-36 -37.5 PK 269.0 V -74.2-36 -38.2 PK 10380.0 H -45.3-30 -15.3 PK 10380.0 V -48.9-30 -18.9 PK 15570.0 H -50.0-30 -20.0 PK 15570.0 V -46.1-30 -16.1 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 77 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 4: Transmit by 802.11ac(20MHz) with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 152.9 H -71.6-36 -35.6 PK 125.6 V -71.4-36 -35.4 PK 259.8 H -70.5-36 -34.5 PK 243.9 V -72.3-36 -36.3 PK 10360.0 H -47.3-30 -17.3 PK 10360.0 V -45.4-30 -15.4 PK 15540.0 H -48.5-30 -18.5 PK 15540.0 V -47.4-30 -17.4 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 78 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 5: Transmit by 802.11ac(40MHz) with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 38 (5190MHz) 172.2 H -72.8-36 -36.8 PK 160.9 V -70.1-36 -34.1 PK 347.9 H -72.4-36 -36.4 PK 445.4 V -72.9-36 -36.9 PK 10380.0 H -46.8-30 -16.8 PK 10380.0 V -47.0-30 -17.0 PK 15570.0 H -47.5-30 -17.5 PK 15570.0 V -45.6-30 -15.6 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 79 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 6: Transmit by 802.11ac(80MHz) with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 42 (5210MHz) 142.5 H -72.5-36 -36.5 PK 157.5 V -73.2-36 -37.2 PK 288.2 H -73.1-36 -37.1 PK 389.9 V -70.7-36 -34.7 PK 10420.0 H -46.4-30 -16.4 PK 10420.0 V -45.5-30 -15.5 PK 15630.0 H -47.8-30 -17.8 PK 15630.0 V -48.7-30 -18.7 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 80 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 7: Transmit by 802.11a with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 154.9 H -74.3-36 -38.3 PK 164.4 V -72.0-36 -36.0 PK 351.3 H -72.6-36 -36.6 PK 385.1 V -73.6-36 -37.6 PK 10360.0 H -47.4-30 -17.4 PK 10360.0 V -48.1-30 -18.1 PK 15540.0 H -47.2-30 -17.2 PK 15540.0 V -46.8-30 -16.8 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 81 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 8: Transmit by 802.11n(20MHz) with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 140.5 H -73.1-36 -37.1 PK 149.1 V -72.1-36 -36.1 PK 367.6 H -73.3-36 -37.3 PK 258.5 V -75.0-36 -39.0 PK 10360.0 H -47.4-30 -17.4 PK 10360.0 V -45.0-30 -15.0 PK 15540.0 H -45.5-30 -15.5 PK 15540.0 V -46.7-30 -16.7 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 82 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 9: Transmit by 802.11n(40MHz) with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 38 (5190MHz) 173.3 H -70.7-36 -34.7 PK 120.8 V -72.9-36 -36.9 PK 349.1 H -74.1-36 -38.1 PK 233.9 V -70.8-36 -34.8 PK 10380.0 H -49.3-30 -19.3 PK 10380.0 V -47.0-30 -17.0 PK 15570.0 H -49.4-30 -19.4 PK 15570.0 V -47.9-30 -17.9 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 83 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 10: Transmit by 802.11ac(20MHz) with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 160.5 H -70.8-36 -34.8 PK 144.2 V -73.0-36 -37.0 PK 302.2 H -70.0-36 -34.0 PK 385.6 V -70.3-36 -34.3 PK 10360.0 H -48.8-30 -18.8 PK 10360.0 V -46.6-30 -16.6 PK 15540.0 H -48.3-30 -18.3 PK 15540.0 V -49.2-30 -19.2 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 84 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 11: Transmit by 802.11ac(40MHz) with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 38 (5190MHz) 150.1 H -72.4-36 -36.4 PK 140.2 V -72.3-36 -36.3 PK 267.9 H -73.7-36 -37.7 PK 302.9 V -71.8-36 -35.8 PK 10380.0 H -48.2-30 -18.2 PK 10380.0 V -45.3-30 -15.3 PK 15570.0 H -46.1-30 -16.1 PK 15570.0 V -49.2-30 -19.2 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 85 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 12: Transmit by 802.11ac(80MHz) with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 42 (5210MHz) 155.4 H -71.3-36 -35.3 PK 151.3 V -72.3-36 -36.3 PK 388.2 H -72.1-36 -36.1 PK 319.2 V -71.9-36 -35.9 PK 10420.0 H -45.4-30 -15.4 PK 10420.0 V -45.5-30 -15.5 PK 15630.0 H -48.9-30 -18.9 PK 15630.0 V -47.7-30 -17.7 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 86 of 134

7. Transmitter Unwanted Emissions Within the 5GHz RLAN Bands 7.1. Test Equipment Transmitter Unwanted Emissions Within the 5GHz RLAN Bands / TR-8 Instrument Manufacturer Type No. Serial No. Cali. Due Date Spectrum Analyzer Agilent E4446A MY45300103 2018.01.04 Temperature/Humidity Meter Zhichen ZC1-2 TR8-TH 2017.04.10 Note: All equipments are calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. 7.2. Test Setup For Conducted Measurement Page: 87 of 134

7.3. Limit Transmitter unwanted emissions within the 5 GHz RLAN bands are radio frequency emissions within the 5 GHz RLAN bands Page: 88 of 134

7.4. Test Procedure Test Method References Rule Chapter Description ETSI EN 301 893 V1.8.1 5.3.6 Transmitter unwanted emissions within the 5 GHz RLAN bands Option 1: For equipment with continuous transmission capability The UUT shall be configured for continuous transmit mode (duty cycle equal to 100 %). If this is not possible, thenoption 2 shall be used. Step 1 1, Spectrum analyser settings:2,spectrum analyser settings: 1) Resolution bandwidth: 1 MHz 2) Video bandwidth: 30 khz 3) Detector mode: Peak 4) Trace mode: Video Average 5) Sweep Time: Coupled 6) Centre Frequency: Centre frequency of the channel being tested 7) Span: 2 Nominal Channel Bandwidth 2, Use the marker to find the highest average power level of the power envelope of the UUT. This level shall be used as the reference level for the relative measurements. Step 2 1, Adjust the frequency range of the spectrum analyser to allow the measurement to be performed within the sub-bands 5 150 MHz to 5 350 MHz and 5 470 MHz to 5 725 MHz. No other parameter of the spectrum analyser should be changed. 2, Compare the relative power envelope of the UUT with the limits defined in clause 4.5.2.2. Option 2: For equipment without continuous transmission capability This method shall be used if the UUT is not capable of operating in a continuous transmit mode (duty cycle less than 100 %). In addition, this option can also be used as an alternative to option 1 for systems operating in a continuous transmit mode. Step 1 1, Spectrum analyser settings: 1) Resolution bandwidth: 1 MHz 2) Video bandwidth: 30 khz 3) Detector mode: RMS 4) Trace Mode: Max Hold 5) Sweep time: 1 minute 6) Centre Frequency: Centre frequency of the channel being tested Page: 89 of 134

7) Span: 2 Nominal Channel Bandwidth 2 Use the marker to find the highest average power level of the power envelope of the UUT. This level shall be used as the reference level for the relative measurements. Step 2 1, Adjust the frequency range of the spectrum analyser to allow the measurement to be performed within the sub-bands 5 150 MHz to 5 350 MHz and 5 470 MHz to 5 725 MHz. No other parameter of the spectrum analyser should be changed. 2,Compare the relative power envelope of the UUT with the limits defined in clause 4.5.2.2. 1) Resolution bandwidth: 1 MHz 2) Video bandwidth: 30 khz 3) Detector mode: RMS 4) Trace Mode: Max Hold 5) Sweep time: 1 minute 6) Centre Frequency: Centre frequency of the channel being tested 7) Span: 2 Nominal Channel Bandwidth 2 Use the marker to find the highest average power level of the power envelope of the UUT. This level shall be used as the reference level for the relative measurements. Radiated measurement The test set up as described in annex B shall be used with a spectrum analyser of sufficient accuracy attached to the test antenna. Page: 90 of 134

7.5. Test Result Product : 1, AC1600 WLAN Telefon DSL Router : Transmiter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 Test Mode : Mode 1: Transmit by 802.11a Channel 36(5180MHz) Page: 91 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 2: Transmit by 802.11n(20MHz) Channel 36(5180MHz) Page: 92 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmiter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 3: Transmit by 802.11n(40MHz) Channel 38(5190MHz) Page: 93 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmiter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 4: Transmit by 802.11ac(20MHz) Channel 36(5180MHz) Page: 94 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmiter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 5: Transmit by 802.11ac(40MHz) Channel 38(5190MHz) Page: 95 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 6: Transmit by 802.11ac(80MHz) Channel 42(5210MHz) Page: 96 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 7: Transmit by 802.11a with Beam-forming Channel 36(5180MHz) Page: 97 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 8: Transmit by 802.11n(20MHz) with Beam-forming Channel 36(5180MHz) Page: 98 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 9: Transmit by 802.11n(40MHz) with Beam-forming Channel 38(5190MHz) Page: 99 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 10: Transmit by 802.11ac(20MHz) with Beam-forming Channel 36(5180MHz) Page: 100 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 11: Transmit by 802.11ac(40MHz) with Beam-forming Channel 38(5190MHz) Page: 101 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter Unwanted Emissions Within the 5GHz RLAN Bands : TR-8 : Mode 12: Transmit by 802.11ac(80MHz) with Beam-forming Channel 42(5210MHz) Page: 102 of 134

8. Receiver Spurious Emissions 8.1. Test Equipment Receiver Spurious Emissions / AC-6 Instrument Manufacturer Type No. Serial No. Cal. Due Date Spectrum Analyzer Agilent E4440A MY49420184 2018.01.14 PSG Analog S.G. Agilent E8257D MY44321116 2018.01.14 Preamplifier Agilent 8449B 3008A02597 2017.04.11 Bilog Antenna Schaffner CBL6112B 2932 2017.09.25 Half Wave Tuned Dipole COM-POWER Antenna AD-100 40137 2018.02.26 Broad-Band Horn Schwarzbeck Antenna BBHA9120D 737 2017.03.06 Filter Banks QuieTek QTK-FB AC6-FB 2017.05.03 Temperature/Humidity Meter zhicheng ZC1-2 AC6-TH 2018.01.05 Note: All equipments are calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. Page: 103 of 134

8.2. Test Setup Receiver Spurious Emissions / AC-6 (Below 1G) Receiver Spurious Emissions / AC-6 (Above 1G) 8.3. Limit Spurious radiated emission limits Page: 104 of 134

8.4. Test Procedure Test Method References Rule Chapter Description ETSI EN 301 893V1.8.1 5.3.7 Transmitter unwanted emissions outside the 5 GHz RLAN bands Step 1 The sensitivity of the spectrum analyser should be such that the noise floor is at least 12 db below the limits given in clause 4.6.2, table 4. Step 2 1,The emissions shall be measured over the range 30 MHz to 1 000 MHz.2,Spectrum analyser settings: 2,Spectrum analyser settings:2)video bandwidth: 300 khz 3) Resolution bandwidth: 100 khz 4) Video bandwidth: 300 khz 5) Detector mode: Peak 6)Trace Mode: Max Hold 7) Sweep Points: 9 700 For spectrum analysers not supporting this number of sweep points, the frequency band may be segmented. For spectrum analysers capable of supporting twice this number of sweep points, the frequency adjustment in clause 5.3.7.2.1.2 (step 1, last bullet) may be omitted. 8) Sweep time: Auto 3, Wait for the trace to stabilize. Any emissions identified that have a margin of less than 6 db with respect to the limits given in clause 4.6.2, table 4, shall be individually measured using the procedure in clause 5.3.7.2.1.2 and compared to the limits given in clause 4.6.2, table 4. Step 3 1, The emissions shall now be measured over the range 1 GHz to 26 GHz. 2, Spectrum analyser settings: 1) Resolution bandwidth: 1 MHz 2) Video bandwidth: 3 MHz 3) Detector mode: Peak 4) Trace mode: Max Hold 5) Sweep Points: 25 000 For spectrum analysers not supporting this high number of sweep points, the frequency band may need to be segmented. For spectrum analysers capable of supporting twice this number of sweep points, the frequency adjustment in Page: 105 of 134

clause 5.3.7.2.1.2 (step 1, last bullet) may be omitted. 6)Sweep time: Auto 3,Wait for the trace to stabilize. Any emissions identified that have a margin of less than 6 db with respect to the limits given in clause 4.6.2, table 4, shall be individually measured using the procedure in clause 5.3.7.2.1.2 and compared to the limits given in clause 4.6.2, table 4. Step 4 1, The level of the emissions shall be measured using the following spectrum analyser settings: 1) Measurement Mode: Time Domain Power 2) Centre Frequency: Frequency of the emission identified during the pre-scan 3) Resolution Bandwidth: 100 khz (emissions < 1 GHz) / 1 MHz (emissions > 1 GHz) 4) Video Bandwidth: 300 khz (emissions < 1 GHz) / 3 MHz (emissions > 1 GHz) 5) Frequency Span: Zero Span 6) Sweep mode: Single Sweep 7) Sweep time: 30 ms 8) Sweep points: 30 000 9) Trigger: Video (for burst signals) or Manual (for continuous signals) 10) Detector: RMS 2, Adjust the centre frequency (fine tune) to capture the highest level of one burst of the emission to be measured. This fine tuning can be omitted for spectrum analysers capable of supporting twice this number of sweep points required in step 2 and step 3 from the pre-scan procedure in clause 5.3.7.2.1.1. Step 5 1, Set a window where the start and stop indicators match the start and end of the burst with the highest level and record the value of the power measured within this window. 2, If the spurious emission to be measured is a continuous transmission, the measurement window shall be set to the start and stop times of the sweep. Step 6 1, Set a window where the start and stop indicators match the start and end of the burst with the highest level and record the value of the power measured within this window. 2, Sum the measured power (within the observed window) for each of the active receive chains. Step 7 1, The value defined in step 3 shall be compared to the limits defined in clause 4.6.2, table 4. Radiated measurement The test set up as described in annex B shall be used with a spectrum analyser attached to the test antenna (see clause 5.2). Page: 106 of 134

8.5. Test Result Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 13: Receive by 802.11a with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 231.1 H -70.7-57 -13.7 PK 248.2 V -71.5-57 -14.5 PK 375.1 H -72.7-57 -15.7 PK 415.3 V -70.8-57 -13.8 PK 1886.9 H -56.2-47 -9.2 PK 1895.5 V -57.2-47 -10.2 PK 3925.0 H -58.9-47 -11.9 PK 3668.3 V -58.4-47 -11.4 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 107 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 14: Receive by 802.11n(20MHz) with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 207.4 H -70.9-57 -13.9 PK 253.6 V -70.4-57 -13.4 PK 378.7 H -71.5-57 -14.5 PK 429.5 V -71.5-57 -14.5 PK 1861.3 H -59.4-47 -12.4 PK 1886.2 V -54.6-47 -7.6 PK 3834.4 H -58.5-47 -11.5 PK 3642.5 V -58.3-47 -11.3 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 108 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 15: Receive by 802.11n(40MHz) with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 38 (5190MHz) 214.5 H -71.3-57 -14.3 PK 238.2 V -74.3-57 -17.3 PK 353.4 H -72.8-57 -15.8 PK 412.8 V -74.7-57 -17.7 PK 1852.7 H -58.7-47 -11.7 PK 1863.2 V -59.0-47 -12.0 PK 3851.7 H -55.2-47 -8.2 PK 3583.1 V -57.4-47 -10.4 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 109 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 16: Receive by 802.11ac(20MHz) with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 215.3 H -74.4-57 -17.4 PK 243.2 V -71.3-57 -14.3 PK 358.3 H -72.4-57 -15.4 PK 411.7 V -74.8-57 -17.8 PK 1825.6 H -55.6-47 -8.6 PK 1843.7 V -57.9-47 -10.9 PK 3812.8 H -53.7-47 -6.7 PK 3563.4 V -59.1-47 -12.1 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 110 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 17: Receive by 802.11ac(40MHz) with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 38 (5190MHz) 207.7 H -74.4-57 -17.4 PK 245.2 V -74.5-57 -17.5 PK 358.3 H -71.3-57 -14.3 PK 376.5 V -73.0-57 -16.0 PK 1823.7 H -55.6-47 -8.6 PK 1849.1 V -56.9-47 -9.9 PK 3762.5 H -53.3-47 -6.3 PK 3518.3 V -54.7-47 -7.7 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 111 of 134

Product : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 Test Mode : Mode 18: Receive by 802.11ac(80MHz) with Ant 1+2+3 Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 42 (5210MHz) 211.4 H -72.7-57 -15.7 PK 231.5 V -73.0-57 -16.0 PK 363.2 H -74.2-57 -17.2 PK 391.7 V -73.1-57 -16.1 PK 1790.2 H -58.9-47 -11.9 PK 1813.5 V -55.3-47 -8.3 PK 3738.4 H -57.9-47 -10.9 PK 3472.5 V -57.5-47 -10.5 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 112 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 19: Transmit by 802.11a with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 228.8 H -74.6-57 -17.6 PK 245.7 V -72.9-57 -15.9 PK 371.4 H -74.5-57 -17.5 PK 411.2 V -73.2-57 -16.2 PK 1868.1 H -54.5-47 -7.5 PK 1876.6 V -53.4-47 -6.4 PK 3885.8 H -54.9-47 -7.9 PK 3631.7 V -53.3-47 -6.3 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 113 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 20: Receive by 802.11n(20MHz) with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 226.7 H -73.9-57 -16.9 PK 243.4 V -71.3-57 -14.3 PK 367.7 H -74.8-57 -17.8 PK 407.1 V -74.8-57 -17.8 PK 1849.5 H -55.5-47 -8.5 PK 1857.9 V -59.4-47 -12.4 PK 3847.0 H -53.3-47 -6.3 PK 3595.4 V -57.0-47 -10.0 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 114 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 21: Receive by 802.11n(40MHz) with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 38 (5190MHz) 224.5 H -74.6-57 -17.6 PK 241.0 V -72.8-57 -15.8 PK 364.1 H -73.0-57 -16.0 PK 403.2 V -72.8-57 -15.8 PK 1830.9 H -54.4-47 -7.4 PK 1839.4 V -59.3-47 -12.3 PK 3808.5 H -53.8-47 -6.8 PK 3559.4 V -53.1-47 -6.1 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 115 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 22: Receive by 802.11ac(20MHz) with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 36 (5180MHz) 222.3 H -73.5-57 -16.5 PK 238.6 V -72.1-57 -15.1 PK 360.5 H -73.7-57 -16.7 PK 399.2 V -73.7-57 -16.7 PK 1812.8 H -56.3-47 -9.3 PK 1821.1 V -55.9-47 -8.9 PK 3770.5 H -53.3-47 -6.3 PK 3523.9 V -59.2-47 -12.2 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 116 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 23: Receive by 802.11ac(40MHz) with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 38 (5190MHz) 220.1 H -70.7-57 -13.7 PK 236.3 V -72.5-57 -15.5 PK 357.0 H -73.0-57 -16.0 PK 395.3 V -70.6-57 -13.6 PK 1794.7 H -54.2-47 -7.2 PK 1802.8 V -55.1-47 -8.1 PK 3732.7 H -57.3-47 -10.3 PK 3488.9 V -57.0-47 -10.0 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 117 of 134

Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Transmitter spurious emissions : AC-6 : Mode 24: Receive by 802.11ac(80MHz) with Ant 1+2+3 with Beam-forming Frequency Polarization Measure Level Limit Over Limit (MHz) (H/V) (dbm) (dbm) (db) Detector Channel 42 (5210MHz) 218.0 H -70.9-57 -13.9 PK 234.0 V -72.2-57 -15.2 PK 353.5 H -70.2-57 -13.2 PK 391.3 V -73.2-57 -16.2 PK 1776.9 H -55.7-47 -8.7 PK 1784.8 V -57.2-47 -10.2 PK 3695.6 H -55.1-47 -8.1 PK 3454.0 V -58.0-47 -11.0 PK Note 1:The final result only applies for using RMS detector, if the pre-test result on peak is 6dB lower than limit, then RMS measurement needn t be performed. Page: 118 of 134

9. Adaptivity (Channel Access Mechanism) 9.1. Test Equipment Adaptivity / TR-8 Instrument Manufacturer Type No. Serial No Cal. Due Date Spectrum Analyzer Agilent N9010A MY48030494 2018.01.14 10dB Coaxial Coupler Agilent 87300C MY44300299 N/A Splitter/Combiner (Qty: 2) Mini-Circuits ZAPD-50W 4.2-6.0 NN256400424 GHz N/A Splitter/Combiner (Qty: 2) MCLI PS3-7 4463/4464 N/A PSG Analog Signal Generator Agilent E8257D MY44321116 2018.01.14 ESG Vector Signal Generator Agilent E4438C MY49070163 2018.01.14 Temperature/Humidity Meter Zhichen ZC1-2 TR8-TH 2017.04.10 Note: All equipments are calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. 9.2. Test Setup For Conducted Measurement Page: 119 of 134

9.3. Limit Adaptivity Limit Frame Based Equipment 1)Minimum Clear Channel Assessment (CCA) time = 20 us; 2)CCA observation time used by the equipment declared by the manufacturer; 3)COT = 1 ms to 10 ms; 4)Idle Period 5% of COT; 5)Detection threshold level = -73dBm/MHz + (23 Ph)/(1MHz); LBT based Detect and Avoid (Load Based Equipment with spectrum sharing mechanism IEEE Std.): 1)LBT Based spectrum sharing mechanism may implement IEEE Std. 802.11-2007 clauses 9 and 17, in IEEE Std. 802.11n-2009 clauses 9, 11 and 20. LBT based Detect and Avoid (Load Based Equipment) -Option A 1)Minimum Clear Channel Assessment (CCA) time = 20 us; 2)CCA observation time used by the equipment declared by the manufacturer; 3)COT (13 / 32) * q ms; q = [4~32]; 1.625ms~13ms; 4)N = number of clear idle slots are randomly [1~q]. Every time an Extended CCA is required and 5)the N value stored in a counter. Extended CCA = N * CCA; 6)Detection threshold level = -73dBm/MHz + (23 Ph)/ (1MHz); LBT based Detect and Avoid (Load Based Equipment) -Option B 1)Minimum Clear Channel Assessment (CCA) time = 20 us; 2)CCA observation time used by the equipment declared by the manufacturer; 3)Extended CCA time = The initial value of q is 16 and shall be doubled for every new Extended CCA check until q has reached 1024. Once q has reached a value of 1 024, the value of q may be reset to the initial value of 16. 4)COT 10ms; 5)N = number of clear idle slots are randomly [1~q]. Every time an Extended CCA is required and the N value stored in a counter. Extended CCA = N * CCA; 6)Detection threshold level = -73dBm/MHz + (23 Ph)/ (1MHz); Short Control Signalling Transmissions: Short Control Signalling Transmissions shall have a maximum duty cycle of 5% within an observation period of 50ms. Page: 120 of 134

9.4. Test Procedure Test Method References Rule Chapter Description ETSI EN 301 893 V1.8.1 5.3.9 Adaptivity The different steps below define the procedure to verify the efficiency of the adaptivity mechanism of the equipment. Step 1 1,The UUT shall connect to a companion device during the test. The signal generator, spectrum analyser, UUT and the companion device are connected using a Set-up equivalent to the example given by figure 13 although the signal generator does not generate any signals at this point in time. The spectrum analyser is used to monitor the transmissions of the UUT in response to the interference signal. 2,The received signal level (wanted signal from the companion device) at the UUT shall be sufficient to maintain a reliable link for the duration of the test. A typical value for the received signal level which can be used in most cases is -50 dbm/mhz. 3,The analyser shall be set as follows: 1) RBW: Occupied Channel Bandwidth (if the analyser does not support this setting, the highest available setting shall be used) 2) VBW: 3 RBW (if the analyser does not support this setting, the highest available setting shall be used) 4)Detector Mode: RMS 5) Centre Frequency: Equal to the centre frequency of the operating channel 6) Span: 0 Hz 7) Sweep time: > Channel Occupancy Time 8) Trace Mode: Clear/Write 9) Trigger Mode: Video or External Step 2 1, Configure the UUT for normal transmissions with a payload resulting in a minimum transmitter activity ratio of 30 %. Where this is not possible, the UUT shall be configured to the maximum payload possible. 2, Using the procedure defined in clause 5.3.9.2.2, it shall be verified that the UUT complies with the maximum Channel Occupancy Time and the (minimum) Idle Period defined in clause 4.8.3.1 for Frame Based Equipment and defined in clause 4.8.3.2 for Load Based Equipment. NOTE 1: For IEEE 802.11 [8] and IEEE 802.11ac [9] equipment (see first paragraph of clause 4.8.3.2), the limits to be applied for the (minimum) Idle Period and the maximum Channel Occupancy Time are as defined for other types of Load Based Equipment (see clause 4.8.3.2, Option A point 2) and point 3) or Option B point 2) and point 3). Page: 121 of 134

Step 3: Adding the interference signal An interference signal as defined in clause B.7 is injected on the current operating channel of the UUT. The power spectral density level (at the input of the UUT) of this interference signal shall be equal to the applicable CCA threshold level (TL) defined in clause 4.8.3.1 or clause 4.8.3.2. Step 4: Verification of reaction to the interference signal 1, The spectrum analyser shall be used to monitor the transmissions of the UUT on the selected operating channel after the interference signal was injected. This may require the spectrum analyser sweep to be triggered by the start of the interfering signal. 2 Using the procedure defined in clause 5.3.9.2.2, it shall be verified that: i) The UUT stops transmissions on the current operating channel. NOTE 2: The UUT is assumed to stop transmissions within a period equal to the Maximum Channel Occupancy Time defined in clause 4.8.3.1 for Frame Based Equipment or clause 4.8.3.2 for Load Based Equipment. The UUT is allowed to have Short Control Signalling Transmissions on the current operating channel, see ii) and iii). NOTE 3: For equipment having simultaneous transmissions on multiple (adjacent or non-adjacent) operating channels, the equipment is allowed to continue transmissions on other Operating Channels. ii) Apart from Short Control Signalling Transmissions there shall be no subsequent transmissions while the interfering signal is present. iii) The Short Control Signalling Transmissions shall comply with the limits defined in clause 4.8.3.3. The verification of the Short Control Signalling transmissions may require the analyser settings to be changed (e.g. sweep time). 3,To verify that the UUT is not resuming normal transmissions as long as the interference signal is present, the monitoring time may need to be 60 s or more, in which case a segmented measurement may need to be performed in order to achieve the required resolution. 4, Once the test is completed and the interference signal is removed, the UUT may start transmissions again on this channel however this is not a requirement and therefore does not require testing. Step 5 Step 2 to step 4 shall be repeated for each of the channels to be tested. Generic test procedure for measuring channel/frequency usage This is a generic test method to evaluate transmissions on the operating channel being investigated. This test is only performed as part of the procedure described in clause 5.3.9.2.1. Step 1: 1, The analyser shall be set as follows: 1)Centre Frequency: equal to the centre frequency of the channel being investigated 2)Frequency Span: 0 Hz Page: 122 of 134

3)RBW: approximately 50 % of the Occupied Channel Bandwidth (if the analyser does not support this setting, the highest available setting shall be used) 4) VBW: RBW (if the analyser does not support this setting, the highest available setting shall be used) 5)Detector Mode: RMS 6) Sweep time: > the Channel Occupancy Time 7) Sweep points: at least one sweep point per μs 8) Trace mode: Clear/Write 9) Trigger: Video or External Step 2: Save the trace data to a file for further analysis by a computing device using an appropriate software application or program. Step 3: 1, Identify the data points related to the channel being investigated by applying a threshold. 2, Count the number of consecutive data points identified as resulting from a single transmission on the channel being investigated and multiply this number by the time difference between two consecutive data points. Repeat this for all the transmissions within the measurement window. 3 For measuring idle or silent periods, count the number of consecutive data points identified as resulting from a single transmitter off period on the channel being investigated and multiply this number by the time difference between two consecutive data points. Repeat this for all the transmitter off periods within the measurement window. Radiated measurements For a UUT with integral antenna(s) and without temporary antenna connector(s), radiated measurements shall be used. The output power of the signal generator simulating the interference signal shall provide a signal power at the antenna of the UUT with a level equal to CCA Threshold Level (TL) defined in clause 4.8.3.1 or clause 4.8.3.2. When performing radiated testing on a UUT with a directional antenna (including smart antenna systems and systems capable of beamforming), the wanted communications link (between the UUT and the companion device) and the interference test signals shall be aligned to the direction corresponding to the UUT's maximum antenna gain. The test set up as described in annex B and applicable measurement procedures as described in annex C shall be used totest the adaptivity of the UUT. The test procedure is further as described under clause 5.3.9.2.1. Page: 123 of 134

9.5. Test Result Product Test Mode : 1, AC1600 WLAN Telefon DSL Router : Adaptivity : TR-8 : Mode 25: Normal Operation by 802.11ac(80MHz) Frequency (MHz) COT (ms) Idle Period (ms) Limit (ms) Short Control Signalling Transmissions Time Limit (ms) Result 5210MHz 0.925 0.75 13 0 5 Pass Channel Occupancy & Idle Period: Page: 124 of 134

Interference Signal Calibration Page: 125 of 134

Verification of reaction to the interference signal Page: 126 of 134

10. Attachment 10.1. Test Photograph Description: Transmitter/Receiver Spurious Emissions Test Setup for Below 1GHz Description: Transmitter/Receiver Spurious Emissions Test Setup for 1~18GHz Page: 127 of 134

Description: Transmitter/Receiver Spurious Emissions Test Setup for above 18GHz Description: Conducted Normal Environment Setup Photograph Page: 128 of 134

Description: Conducted Extreme Environment Setup Photograph Description: Adaptivity Setup Photograph Page: 129 of 134

10.2. EUT Photograph (1) EUT Photo (2) EUT Photo Page: 130 of 134

(3) EUT Photo (4) EUT Photo Page: 131 of 134

(5) EUT Photo (6) EUT Photo Page: 132 of 134

(7) EUT Photo (8) EUT Photo Page: 133 of 134

2024 © hobbydocbox.com Privacy Policy | Terms of Service | Feedback