CENTERING CLAMP JAWS BASE PLATE Part No. CP170 Part No. CP175 Part No. CP179 COMPACT PNEUMATIC VISE Part No. AMLFV-S PAIR OF CLAMPS Part No. MVAC-CS PAIR OF POSITIONING KEYS Part No. MVAC-SK PAIR OF POSITIONING KEYS Part No. AMLFV-FK
CENTERING CLAMP Perfect Workholding for 5-axis Machining! Max Clamping Force 20kN CENTERING CLAMP Self-centering vise for 5-axis machine or rotary table Serrated Jaw Dovetail Jaw Tip and surface contact Dual surface contact
CP170 CENTERING CLAMP Body Spindle Movable Jaw Base SCM440 steel Induction hardened Black oxide finished Precision ground SCM435 steel Nitrocarburized SCM440 steel Black oxide finish φ185 φ10f7 29 5 A A M8 1.25 12 Stroke 49.7 2 2-M8 1.25 Depth 10 9.5 27 Section A-A (4 places) 43 6 Section C-C (4 places) 50 12 8 C C 72 170 33 20 12 Across Flats 8 80 120±0.02 B B M8 1.25 12 φ10f7 Effective depth 10 Section D-D (2 places) 50 4-M8 1.25 Depth 12 D D 52±0.02 120 52±0.02 12 5.5 Section B-B (4 places) φ12h7 Part Number Allowable Tightening Torque (N m) Weight (kg) Proper Jaws Serrated Jaws Dovetail Jaws Part Number Clamping Force (kn) Part Number Clamping Force (kn) CP170-08017 100 3.9 CP175-08001S 20 CP175-08001D 20 Supplied With 4 pcs. of Locating Screws for Jaws Related Product Jaws Base Plate
How to Mount Jaws Mount Jaws to the jaw bases of CP170. Use included locating screws to fix Jaws. Locating Screws (included) CP175 Jaws *) *) Jaws are not supplied with CP170. How to Operate 8mm Hex key Spindle Use a hex key to operate the spindle. Both jaws move toward the arrow directions by turning the spindle clockwise. Both jaws move against the arrow directions by turning the spindle counterclockwise. CW Technical Information Workipiece Centering Repeatability: ±0.02 Stroke With CP175-08001S Serrated Jaws With CP175-08001D Dovetail Jaws Stroke 8.5~108 Stroke 11.5~111
CP175 JAWS CP175-08001S (Serrated) CP175-08001D Part Number CP175-08001S CP175-08001D (Dovetail) Type Serrated Dovetail Weight (g) 600 Use as jaws of CP170 Centering Clamp. 23.5 79 20 3.5 φ10 *) φ17 3 21.5 16.5 34 CP175-08001S (Serrated) (2 pcs. as a set) 29 *) 6 14.5 60 23 20 3 4.5 Body SCM440 steel Quenched & tempered Black oxide finished 3 CP175-08001D (Dovetail) (2 pcs. as a set) *) To produce Jaws at customers, prepare φ10f8 mounting holes with 29±0.02 pitch. Serrated Jaw The serrated tips bite into workpiece and clamp powerfully. Workpiece **) Workpiece ***) Dovetail Jaw Dovetail jaw holds workpiece at two surfaces and provides positive clamping. 3.5 3 3 Serrated Jaw **) Workpiece hardness should be HRC38 or less for use of serrated jaw. Technical Information Dimensions of Centering Clamp with Jaws :73.5 :73 CP175-08001S CP175-08001D 70 50 3 Dovetail Jaw 4.5 ***) Preparation of dovetail groove on workpieces is required. Dovetail Groove Preparation Machine dovetail grooves on workpiece to the specifications below. 0.5 45 R0.4 or less 3.5 60 CP170-08017 170 Workpiece
CP179 BASE PLATE On Request 2-φ7F7 207 120±0.02 4-M8 1.25 (for Eye Bolts) 2-φ11 85 200 225 20 67 4-For M8 Socket-Head Cap Screws 120 11 Section A-A (4 places) 50 12H7 A A 22 147 B B 4 Section B-B (2 places) 2-M5 0.8 Depth 8 Part Number Weight (kg) CP179-08017 2.9 Body S50C steel Use as base plate of CP170 Centering Clamp to mount on the machine table. Note This plate is non-stock item. DIAMOND LOCATING PIN BJ723-10021 ROUND LOCATING PIN BJ721-10021 Socket-Head Cap Screws M8 1.25-20L FLAT KEYS BJ712-12020
COMPACT PNEUMATIC VISE Ideal for small machining center! COMPACT PNEUMATIC VISE Suitable for compact machining centers. Provides quick and easy clamping operation. Turn the handwheel to set movable jaw at the desired position. Supply air for clamping. Air One-touch attachment of the handwheel
Quick & Easy Clamping Air ON Clamp Air OFF Save setup time and workload. Unclamp Can control actuation of several vises at a time by air source. Deformation Prevention Can control clamping force by air depending on workpiece materials. MPa Small Body & Easy Mounting Can be mounted on small machining center easily for its compact design. Conventional vise COMPACT PNEUMATIC VISE 280mm 340mm No interference with machine door.
AMLFV-S COMPACT PNEUMATIC VISE Body Jaws Handwheel SCM440 steel Induction hardened Precision ground SCM440 steel Quenched & tempered Precision ground A5056 aluminum Anodized 2-M10 1.5 Depth 20(lifting hole) Part of the movable jaw projects max. 71. 10~125 85 0~115 15 138 M10 1.5 Depth 15 5-M10 1.5 Depth 12 40 35 63 20 21 40 12 140 135 95 40 75 61 5 50 78 80 18H7 (For Keyway) Rc 1 /8 Front Clamping Port 55 280 60 2-M5 0.8 Depth 10 100 56 Rc 1 /8 Rear Clamping Port 102 64 4-M12 1.75 Depth 18 10 130 230 100 40 Operating Air Clamping Force Mechanism Weight Part Number Clamping Stroke Pressure(MPa) (kn) *) Clamp Unclamp (kg) AMLFV1428-S 2 0.1~1 14 Air Spring 30 *) The clamping force above is at 0.5 MPa. Supplied With 2 of eyebolt Related Product Use MVAC-CS Pair of Clamps for the vise unit fixing. For 14 T-slot positioning, use MVAC-SK Pair of Positioning Keys. For 18 T-slot positioning, use AMLFV-FK Pair of Positioning Keys.
Technical Information (Static Accuracy) 1. Height of supporting surface 2. Position of fixed jaw **) 35±0.01 55±0.02 95±0.01 **) Parallel Use For using multiple vises in parallel, we align the fixed jaw within ±0.01. Specify as "Parallel Use" and the number of vise when ordering. 3. Parallelism of top and bottom surfaces of base 0.01 4. Parallelism of keyway and fixed jaw 0.01 Keyway 5. Squareness of fixed jaw and top surface of base 0.01 Clamping Force (kn) Performance Curve 35 30 25 20 15 10 5 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 Air Pressure (MPa)
Connection with Air To use the front clamping port, attach an air block plug (included) into the rear port. To use the rear clamping port, attach an air block plug (included) into the front port. Air Joint Air Block Plug (included) Air Joint Air Block Plug (included) How to Operate Workpiece Air ON Clamp Turn a handwheel for setting a movable jaw at the desired clamping range. Air OFF Clamping Same Shape Workpieces The clamping stroke of the movable jaw is 2mm with air supply. The clearance between workpiece and the movable jaw should be 1mm or less. Clamping Stroke: 2mm Clearance between workpiece and movable jaw: 1mm or less ***) Unclamp ***) For repeated clamping operation, have a periodic check of the clearance between workpiece and movable jaw. If the clearance becomes bigger by repeated clamp operation, the clamping force may decrease. Feature How to Mount/Remove Handwheel One-touch attachment of the handwheel is possible for its inside plunger mechanism. Can be operated without air supply. For that case, remove the handwheel and use spanner or such tools for clamping. Allowable Tightening Torque: 50 N m (Clamping Force: 10kN) Hex. Head Across Flats 12 Note This vise is single actuated. (Clamp with Air Supply / Unclamp with Air Release) Please prepare three-directional control valve. Air joint, tube, directional control valve and such accessories are not available from Imao.
MVAC-CS PAIR OF CLAMPS 35 60 M Socket-head Cap Screw AMLFV-FK PAIR OF POSITIONING KEYS For M5 Hex Socket Head Cap Screw 18h6 28 30 10 13 Part Number W1 M Weight (g) 8 MVAC150CS14 14 M12 1.75-35L 700 MVAC150CS18 18 M12 1.75-40L 760 W1 25 (2 pcs. as a set) Body Steel Black oxide finished For fixing AMLFV-S Compact Pneumatic Vise MVAC-SK PAIR OF POSITIONING KEYS For M5 Socket-head Cap Screw 6.8 14h6 18h6 Part Number Weight (g) MVAC18SK14 50 Positioning keys for AMLFV-S Compact Pneumatic Vise with 14mm T-slot. 35 12 (2 pcs. as a set) 4.8 Body Steel Quenched & tempered Precision ground Part Number Weight (g) AMLFV18FK 112 Positioning keys for AMLFV-S Compact Pneumatic Vise with 18mm T-slot. 35 12 (2 pcs. as a set) 6.8 Body Steel Quenched & tempered Black oxide finished Precision ground