MBR0H, MBRF0H, MBRB0H High Voltage Schottky Rectifier High Barrier Technology for Improved High Temperature Performance TO-0AC MBR0H PIN CASE MBRB0H PIN D PA (TO-63AB) ITO-0AC MBRF0H PIN HEATSIN FEATURES Power pack Guardring for overvoltage protection Low power loss, high efficiency Low forward voltage drop Low leakage current High forward surge capability High frequency operation Meets MSL level, per J-STD-00, LF maximum peak of 45 C (for TO-63AB package) Solder bath temperature 75 C maximum, 0 s, per JESD -B06 (for TO-0AC and ITO-0AC package) Material categorization: for definitions of compliance please see www.vishay.com/doc?999 TYPICAL APPLICATIONS For use in high frequency rectifier of switching mode power supplies, freewheeling diodes, DC/DC converters, or polarity protection application. DESIGN SUPPORT TOOLS Models Available click logo to get started PRIMARY CHARACTERISTICS I F(AV) 0 A V RRM V I FSM 50 A V F 0.64 V I R 4.5 μa T J max. 75 C Package TO-0AC, ITO-0AC, D PA (TO-63AB) Circuit configurations Single MECHANICAL DATA Case: TO-0AC, ITO-0AC, D PA (TO-63AB) Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Terminals: matte tin plated leads, solderable per J-STD-00 and JESD -B0 E3 suffix meets JESD 0 class A whisker test Polarity: as marked Mounting Torque: 0 in-lbs maximum MAXIMUM RATINGS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL MBR0H UNIT Maximum repetitive peak reverse voltage V RRM Working peak reverse voltage V RWM V Maximum DC blocking voltage V DC Maximum average forward rectified current I F(AV) 0 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 50 A Peak repetitive reverse current at t p =.0 µs, khz I RRM 0.5 Voltage rate of change (rated V R ) dv/dt 0 000 V/μs Operating junction and storage temperature range T J, T STG -65 to +75 C Isolation voltage (ITO-0AC only) from terminal to heatsink t = min V AC 500 V Revision: 08-Jun-08 Document Number: 88667 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?90
MBR0H, MBRF0H, MBRB0H ELECTRICAL CHARACTERISTICS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS VALUE UNIT Notes () Pulse test: 300 μs pulse width, % duty cycle () Pulse test: Pulse width 40 ms I F = 0 A T C = 5 C 0.77 I F = 0 A T C = 5 C 0.64 Maximum instantaneous forward voltage V () F V I F = 0 A T C = 5 C 0.88 I F = 0 A T C = 5 C 0.73 T J = 5 C 4.5 μa Maximum reverse current I () R Rated V R T J = 5 C 6.0 ma THERMAL CHARACTERISTICS (T C = 5 C unless otherwise noted) PARAMETER SYMBOL MBR MBRF MBRB UNIT Typical thermal resistance R JC.7 5.8.7 C/W ORDERING INFORMATION (Example) PACAGE PREFERRED P/N UNIT WEIGHT (g) PACAGE CODE BASE QUANTITY DELIVERY MODE TO-0AC MBR0H-E3/45.80 45 50/tube Tube ITO-0AC MBRF0H-E3/45.94 45 50/tube Tube TO-63AB MBRB0H-E3/45.33 45 50/tube Tube TO-63AB MBRB0H-E3/8.33 8 800/reel Tape and reel Revision: 08-Jun-08 Document Number: 88667 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?90
Average Forward Current (A) Transient Thermal Impedance ( C/W) Junction Capacitance (pf) www.vishay.com MBR0H, MBRF0H, MBRB0H RATINGS AND CHARACTERISTICS CURVES (T C = 5 C unless otherwise noted) 0 6 8 4 Resistive or Inductive Load MBR, MBRB MBRF Instantaneous Reverse Current (µa) 0 000 0 0 0. T J = 50 C T J = 5 C T J = C T J = 5 C 0 0 50 50 Case Temperature ( C) 80 0.0 0 40 60 80 Percent of Rated Peak Reverse Voltage (%) Fig. - Forward Current Derating Curve Fig. 4 - Typical Reverse Characteristics 300 0 000 Peak Forward Surge Current (A) 50 00 50 50 T J = T J Max. 8.3 ms Single Half Sine-Wave 0 0 0 Number of Cycles at 60 Hz Fig. - Maximum Non-Repetitive Peak Forward Surge Current 0 0. 0 Reverse Voltage (V) Fig. 5 - Typical Junction Capacitance Instantaneous Forward Current (A) 0.0 0. T J = 75 C T J = 50 C T J = C T J = 5 C T J = 5 C 0 0.0 0. 0. 0.3 0.4 0.5 0.6 0.7 0.8 0.9.0 Instantaneous Forward Voltage (V) Fig. 3 - Typical Instantaneous Forward Characteristics 0. 0.0 0. 0 t - Pulse Duration (s) Fig. 6 - Typical Transient Thermal Impedance Revision: 08-Jun-08 3 Document Number: 88667 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?90
MBR0H, MBRF0H, MBRB0H PACAGE OUTLINE DIMENSIONS in inches (millimeters) TO-0AC 0.45 (0.54) MAX. 0.370 (9.40) 0.360 (9.4) 0.54 (3.9) DIA. 0.48 (3.74) DIA. 0.3 (.87) 0.03 (.6) 0.85 (4.70) 0.75 (4.44) 0.055 (.39) 0.045 (.4) 0.45 (3.68) 0.35 (3.43) 0.60 (4.06) 0.40 (3.56) PIN 0.635 (6.3) 0.65 (5.87) 0.350 (8.89) 0.330 (8.38).48 (9.6).8 (8.40) 0.603 (5.3) 0.573 (4.55) 0.0 (.79) 0. (.54) 0.057 (.45) 0.045 (.4) PIN CASE 0.560 (4.) 0.530 (3.46) 0.05 (.67) 0.095 (.4) 0.037 (0.94) 0.07 (0.68) 0.05 (5.0) 0.95 (4.95) 0.0 (0.56) 0.04 (0.36) ITO-0AC 45 REF. 0.600 (5.4) 0.580 (4.73) 0.560 (4.) 0.530 (3.46) 0.404 (0.6) 0.384 (9.75) PIN 0.076 (.93) REF. 0.076 (.93) REF. 0.67 (7.04) 0.65 (6.54) 0.9 (4.85) 0.7 (4.35) 0.057 (.45) 0.045 (.4) 0.40 (3.56) DIA. 0.5 (3.7) DIA. 0.350 (8.89) 0.330 (8.38) 0.90 (4.83) 0.70 (4.3) 0.0 (.79) 0. (.54) 0.35 (3.43) DIA. 0. (3.08) DIA. 0.0 (.79) 0. (.54) 0.05 (0.64) 0.05 (0.38) 0.035 (0.89) 0.05 (0.64) 0.05 (5.) 0.95 (4.95) 0.08 (0.7) 0.00 (0.5) D PA (TO-63AB) Mounting Pad Layout 0.4 (0.45) 0.380 (9.65) 0.45 (6.) MIN. 0.90 (4.83) 0.60 (4.06) 0.055 (.40) 0.045 (.4) 0.4 (0.66) min. 0.33 (8.38) min. 0.360 (9.4) 0.30 (8.3) 0.037 (0.940) 0.07 (0.686) 0.05 (.67) 0.095 (.4) 0.64 (5.85) 0.59 (5.00) 0.05 (5.0) 0.95 (4.95) 0.055 (.40) 0.047 (.9) 0 to 0.0 (0 to 0.54) 0.0 (.79) 0.090 (.9) 0.0 (0.53) 0.04 (0.36) 0.40 (3.56) 0.0 (.79) 0.670 (7.0) 0.59 (5.00) 0.08 (.03) MIN. 0.05 (.67) 0.095 (.4) 0.5 (3.8) min. Revision: 08-Jun-08 4 Document Number: 88667 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?90
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. 07 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-7 Document Number: 90