HC RELAY PRODUCT TYPES

FROM SEQUENCE TO POWER CIRCUITS COMPATIBLE WORLDWIDE HC RELAY PRODUCT TYPES Standard type Amber sealed type FEATURES. Long track record means reliable quality.. Can provide switching across the range from low to high level power loads ( A to A). 3. Rich lineup includes relays with LED, with diode, and high-capacity types.. UL, CSA approval is standard Compliance also with Japanese Electrical Appliance and Material Control Law. TYPICAL APPLICATIONS Suitable for factory automation equipment and automotive devices. Control panels, power supply equipment, molding equipment, machine tools, welding equipment, agricultural equipment, etc.. Office equipment, automatic vending machines, telecommunications equipment, disaster prevention equipment, copiers, measuring devices, medical equipment, amusement devices, etc. 3. All types of household appliance Keep (Latching) relay With diode type TYPES HC Relay Type Standard type Amber sealed type HC relay HC keep (latching) relay DC type with surge absorbing diode AC type with surge absorbing CR circuit Contact arrangement Single side stable A: Available Notes:. HC relays with ground terminals also available.. HC relays with. mm wide PC board terminals also available. Contact arrangement Plug-in terminal type PC board terminal type Top mounting type Without LED With LED Without LED With LED (TM type) Form C A A A A A Form C A A A A A 3 Form C A A A A A Form C A A A A A Bifurcated (Twin) Form C A A A A A Form C A A A A A Single side stable Form C A A A A A Form C A A A A A Bifurcated (Twin) Form C A A A A A Single side stable Form C A (With operating indication) A (With operating indication) Form C A A Single side stable Form C A A 3 Form C A A Form C A A Bifurcated (Twin) Form C A A Form C A A Single side stable Form C A A 3 Form C A A Form C A A Bifurcated (Twin) Form C A A Remarks Amber sealed type also available 7 mm higher than standard type ds_c_en_hc: D

RELAY CONTACT ARRANGEMENT Type Single side stable contact -pole bifurcated (twin) contact Part number HC HCD Features Suitable for high-capacity load switching Standard type HC relays have high single-contact capacity; Form C: A Form C and 3 Form C: 7 A Form C: A LED INDICATION TYPE Type Part number With LED indication type HC -HL Bifurcated (twin) contact ensures high contact reliability Suitable for low level loads Minimum switching capability: A m V DC (reference value) 3 7 HC Features LED lights up when relay is operating Inspection and detection of trouble is easy. LEDs are green for DC types and red for AC types. All types are available with LED indication. 3- + LED LED colors indicate the type of relay: red for AC type and green for DC type. Protection diode (Bottom view) HC RELAY SERIES PRODUCT TYPES Type Amber sealed type HC relay HC keep (Latching) relay HC relay with diode type (for DC) Part number HC E HCK HC - - V-D Features Relay is completely sealed with resin. Provides high reliability in adverse surroundings. Suitable for use in dusty conditions or where organic gases are present -pole bifurcated (twin) type available Relay with LED indication available Magnetic latching relay Suitable for nominal operating power saving of operating circuits and for memory circuits Has operating indication (mechanical indicator). Has built-in diode to absorb surge when the coil goes to the off state (for DC type). Suitable for protecting relay driver circuits and for noise suppression Diode characteristics: Reverse breakdown voltage, V, Forward current A Type HC relay with CR circuit (for AC) Part number HC - - V-R Features Has built-in CR circuit to absorb surge when the coil goes to the off state (for AC). Relay with CR circuit is 7 mm higher than standard type relay. ds_c_en_hc: D

VDE c, c, c MINIATURE RELAY FOR WIDER APPLICATIONS HC RELAYS Plug-in type TM type PC board type FEATURES. Long track record means reliable quality.. Can provide switching across the range from low to high level power loads ( A to A). 3. Full range of types Standard types include Form C, Form C, 3 Form C, Form C, -pole bifurcated (twin), plug-in type, PC board type, and TM type.. HC relay with LED indication type also available. UL, CSA approval is standard Compliance also with Japanese Electrical Appliance and Material Control Law. TYPICAL APPLICATIONS Suitable for factory automation equipment and automotive devices. Control panels, power supply equipment, molding equipment, machine tools, welding equipment, agricultural equipment, etc.. Office equipment, automatic vending machines, telecommunications equipment, disaster prevention equipment, copiers, measuring devices, medical equipment, amusement devices, etc. 3. All types of household appliance About Cd-free contacts We have introduced Cadmium free type products to reduce Environmental Hazardous Substances. (The suffix F should be added to the part number. The Suffix F is required only for Form C, Form C, 3 Form C contact type. The Form C and Form C bifurcated (twin) contact type is originally cadmium-free, the suffix F is not required.) Please replace parts containing Cadmium with Cadmium-free products and evaluate them with your actual application before use because the life of a relay depends on the contact material and load. ORDERING INFORMATION HC Contact arrangement : Form C : Form C 3: 3 Form C : Form C D: Bifurcated contact (twin) Terminal arrangement H: Plug-in type HL: Plug-in with LED indication HP: PC board type HPL: PC board with LED indication HTM: TM type AC,,,, (/), (/), (/), (/) V DC,,,, (/) V Contact material Contact material Ag alloy AgNi type Contact arrangement (cadmium-free) Form C F Form C F 3 Form C F Form C Nil Bifurcated contact (twin) Nil Notes: UL/CSA approved type is standard. Please inquire about VDE ( Form C, Form C, and Form C only) and TV-3 ( Form C and Form C only) approved products. 3 ds_c_en_hc: D

TYPES ) Plug-in type Form C Form C 3 Form C Form C Form C (twin) Part No. Part No. Part No. Part No. Part No. V AC HC-H-ACV-F HC-H-ACV-F HC3-H-ACV-F HC-H-ACV HCD-H-ACV V AC HC-H-ACV-F HC-H-ACV-F HC3-H-ACV-F HC-H-ACV HCD-H-ACV V AC HC-H-ACV-F HC-H-ACV-F HC3-H-ACV-F HC-H-ACV HCD-H-ACV V AC HC-H-ACV-F HC-H-ACV-F HC3-H-ACV-F HC-H-ACV HCD-H-ACV /V AC HC-H-ACV-F HC-H-ACV-F HC3-H-ACV-F HC-H-ACV HCD-H-ACV /V AC HC-H-ACV-F HC-H-ACV-F HC3-H-ACV-F HC-H-ACV HCD-H-ACV /V AC HC-H-ACV-F HC-H-ACV-F HC3-H-ACV-F HC-H-ACV HCD-H-ACV /V AC HC-H-ACV-F HC-H-ACV-F HC3-H-ACV-F HC-H-ACV HCD-H-ACV V DC HC-H-DCV-F HC-H-DCV-F HC3-H-DCV-F HC-H-DCV HCD-H-DCV V DC HC-H-DCV-F HC-H-DCV-F HC3-H-DCV-F HC-H-DCV HCD-H-DCV V DC HC-H-DCV-F HC-H-DCV-F HC3-H-DCV-F HC-H-DCV HCD-H-DCV V DC HC-H-DCV-F HC-H-DCV-F HC3-H-DCV-F HC-H-DCV HCD-H-DCV /V DC HC-H-DCV-F HC-H-DCV-F HC3-H-DCV-F HC-H-DCV HCD-H-DCV Standard packing: Carton: ; Case: HC ) Plug-in type (with LED indication) Form C Form C 3 Form C Form C Form C (twin) Part No. Part No. Part No. Part No. Part No. V AC HC-HL-ACV-F HC-HL-ACV-F HC3-HL-ACV-F HC-HL-ACV HCD-HL-ACV V AC HC-HL-ACV-F HC-HL-ACV-F HC3-HL-ACV-F HC-HL-ACV HCD-HL-ACV V AC HC-HL-ACV-F HC-HL-ACV-F HC3-HL-ACV-F HC-HL-ACV HCD-HL-ACV /V AC HC-HL-ACV-F HC-HL-ACV-F HC3-HL-ACV-F HC-HL-ACV HCD-HL-ACV /V AC HC-HL-ACV-F HC-HL-ACV-F HC3-HL-ACV-F HC-HL-ACV HCD-HL-ACV /V AC HC-HL-ACV-F HC-HL-ACV-F HC3-HL-ACV-F HC-HL-ACV HCD-HL-ACV /V AC HC-HL-ACV-F HC-HL-ACV-F HC3-HL-ACV-F HC-HL-ACV HCD-HL-ACV V DC HC-HL-DCV-F HC-HL-DCV-F HC3-HL-DCV-F HC-HL-DCV HCD-HL-DCV V DC HC-HL-DCV-F HC-HL-DCV-F HC3-HL-DCV-F HC-HL-DCV HCD-HL-DCV V DC HC-HL-DCV-F HC-HL-DCV-F HC3-HL-DCV-F HC-HL-DCV HCD-HL-DCV V DC HC-HL-DCV-F HC-HL-DCV-F HC3-HL-DCV-F HC-HL-DCV HCD-HL-DCV /V DC HC-HL-DCV-F HC-HL-DCV-F HC3-HL-DCV-F HC-HL-DCV HCD-HL-DCV Standard packing: Carton: ; Case: 3) PC board type Form C Form C 3 Form C Form C Form C (twin) Part No. Part No. Part No. Part No. Part No. V AC HC-HP-ACV-F HC-HP-ACV-F HC3-HP-ACV-F HC-HP-ACV HCD-HP-ACV V AC HC-HP-ACV-F HC-HP-ACV-F HC3-HP-ACV-F HC-HP-ACV HCD-HP-ACV V AC HC-HP-ACV-F HC-HP-ACV-F HC3-HP-ACV-F HC-HP-ACV HCD-HP-ACV V AC HC-HP-ACV-F HC-HP-ACV-F HC3-HP-ACV-F HC-HP-ACV HCD-HP-ACV /V AC HC-HP-ACV-F HC-HP-ACV-F HC3-HP-ACV-F HC-HP-ACV HCD-HP-ACV /V AC HC-HP-ACV-F HC-HP-ACV-F HC3-HP-ACV-F HC-HP-ACV HCD-HP-ACV /V AC HC-HP-ACV-F HC-HP-ACV-F HC3-HP-ACV-F HC-HP-ACV HCD-HP-ACV /V AC HC-HP-ACV-F HC-HP-ACV-F HC3-HP-ACV-F HC-HP-ACV HCD-HP-ACV V DC HC-HP-DCV-F HC-HP-DCV-F HC3-HP-DCV-F HC-HP-DCV HCD-HP-DCV V DC HC-HP-DCV-F HC-HP-DCV-F HC3-HP-DCV-F HC-HP-DCV HCD-HP-DCV V DC HC-HP-DCV-F HC-HP-DCV-F HC3-HP-DCV-F HC-HP-DCV HCD-HP-DCV V DC HC-HP-DCV-F HC-HP-DCV-F HC3-HP-DCV-F HC-HP-DCV HCD-HP-DCV /V DC HC-HP-DCV-F HC-HP-DCV-F HC3-HP-DCV-F HC-HP-DCV HCD-HP-DCV Standard packing: Carton: ; Case: Note: Please add -3 before -F in the part number when ordering the PC board type. mm width terminal (ex) HC-HP-ACV-3-F. ds_c_en_hc: D

) PC board type (with LED indication) Form C Form C 3 Form C Form C Form C (twin) Part No. Part No. Part No. Part No. Part No. V AC HC-HPL-ACV-F HC-HPL-ACV-F HC3-HPL-ACV-F HC-HPL-ACV HCD-HPL-ACV V AC HC-HPL-ACV-F HC-HPL-ACV-F HC3-HPL-ACV-F HC-HPL-ACV HCD-HPL-ACV V AC HC-HPL-ACV-F HC-HPL-ACV-F HC3-HPL-ACV-F HC-HPL-ACV HCD-HPL-ACV /V AC HC-HPL-ACV-F HC-HPL-ACV-F HC3-HPL-ACV-F HC-HPL-ACV HCD-HPL-ACV /V AC HC-HPL-ACV-F HC-HPL-ACV-F HC3-HPL-ACV-F HC-HPL-ACV HCD-HPL-ACV /V AC HC-HPL-ACV-F HC-HPL-ACV-F HC3-HPL-ACV-F HC-HPL-ACV HCD-HPL-ACV V DC HC-HPL-DCV-F HC-HPL-DCV-F HC3-HPL-DCV-F HC-HPL-DCV HCD-HPL-DCV V DC HC-HPL-DCV-F HC-HPL-DCV-F HC3-HPL-DCV-F HC-HPL-DCV HCD-HPL-DCV V DC HC-HPL-DCV-F HC-HPL-DCV-F HC3-HPL-DCV-F HC-HPL-DCV HCD-HPL-DCV V DC HC-HPL-DCV-F HC-HPL-DCV-F HC3-HPL-DCV-F HC-HPL-DCV HCD-HPL-DCV /V DC HC-HPL-DCV-F HC-HPL-DCV-F HC3-HPL-DCV-F HC-HPL-DCV HCD-HPL-DCV Standard packing: Carton: ; Case: Note: Please add -3 before -F in the part number when ordering the PC board type. mm width terminal (ex) HC-HPL-ACV-3-F. ) TM type Form C Form C 3 Form C Form C Form C (twin) Part No. Part No. Part No. Part No. Part No. V AC HC-HTM-ACV-F HC-HTM-ACV-F HC3-HTM-ACV-F HC-HTM-ACV HCD-HTM-ACV V AC HC-HTM-ACV-F HC-HTM-ACV-F HC3-HTM-ACV-F HC-HTM-ACV HCD-HTM-ACV V AC HC-HTM-ACV-F HC-HTM-ACV-F HC3-HTM-ACV-F HC-HTM-ACV HCD-HTM-ACV V AC HC-HTM-ACV-F HC-HTM-ACV-F HC3-HTM-ACV-F HC-HTM-ACV HCD-HTM-ACV /V AC HC-HTM-ACV-F HC-HTM-ACV-F HC3-HTM-ACV-F HC-HTM-ACV HCD-HTM-ACV /V AC HC-HTM-ACV-F HC-HTM-ACV-F HC3-HTM-ACV-F HC-HTM-ACV HCD-HTM-ACV /V AC HC-HTM-ACV-F HC-HTM-ACV-F HC3-HTM-ACV-F HC-HTM-ACV HCD-HTM-ACV V DC HC-HTM-DCV-F HC-HTM-DCV-F HC3-HTM-DCV-F HC-HTM-DCV HCD-HTM-DCV V DC HC-HTM-DCV-F HC-HTM-DCV-F HC3-HTM-DCV-F HC-HTM-DCV HCD-HTM-DCV V DC HC-HTM-DCV-F HC-HTM-DCV-F HC3-HTM-DCV-F HC-HTM-DCV HCD-HTM-DCV V DC HC-HTM-DCV-F HC-HTM-DCV-F HC3-HTM-DCV-F HC-HTM-DCV HCD-HTM-DCV /V DC HC-HTM-DCV-F HC-HTM-DCV-F HC3-HTM-DCV-F HC-HTM-DCV HCD-HTM-DCV Standard packing: Carton: ; Case: RATING. Coil data ) AC coils (/Hz) Type Standard Nominal coil voltage V AC Pick-up voltage (at C F) Drop-out voltage (at C F) Nominal coil current [ %] (at C F) Hz Coil inductance Nominal operating power Max. allowable voltage (at 7 C F) /V AC./3.mA./.mA 7.H.7H.3VA.VA /V AC.7/7.mA /.ma.h.7h.3va.va Notes:. The relay operates in a range of % to % V of the voltage rating, but ideally, in consideration of temporary voltage fluctuations, it should be operated at the rated voltage. In particular, for AC operation, if the applied voltage drops to % V or more below the rated voltage, humming will occur and a large current will flow leading possibly to coil burnout.. The maximum allowable voltage is the maximum voltage fluctuation value for the coil power supply. This value is not a permissible value for continuous operation. (This value differs depending on the ambient temperature. Please contact us for details. Hz N.C. condition N.O. condition V AC ma ma.3h.h.3va.va V AC %V or more %V or less of ma ma.3h.h.3va.va of nominal V AC nominal voltage ma ma.7h.h.3va.va voltage /V AC (Initial) (Initial) 3./.7mA /3.mA 3.7H.3H.3VA.VA Hz Hz ma ma.7h.7h.3va.va %V of nominal voltage ) DC coils Type Standard Nominal coil voltage Pick-up voltage (at C F) Drop-out voltage (at C F) Nominal coil current [ %] (at C F) Coil resistance [ %] (at C F) Nominal operating power V DC ma.w V DC V DC V DC %V or less of nominal voltage (Initial) %V or more of nominal voltage (Initial) 7mA 37mA.mA,.W.W.W Max. allowable voltage (at 7 C F) %V of nominal voltage /V DC /ma,.w Notes:. The coil resistance for DC operation is the value measured when the coil temperature is C F. Compensate.% for every C change in temperature.. The relay operates in a range of % to % V of the voltage rating, but ideally, in consideration of temporary voltage fluctuations, it should be operated at the rated voltage. 3. For use with V DC, connect a K (W) resistor, in series, to the V DC relay.. The maximum allowable impress voltage is the maximum voltage fluctuation value for the coil power supply. This value is not a permissible value for continuous operation. (This value differs depending on the ambient temperature. Please contact us for details.) ds_c_en_hc: D

. Specifications Characteristics Item Specifications Contact Rating Electrical characteristics Mechanical characteristics Expected life Conditions Unit weight Arrangement Form C Form C 3 Form C Form C Form C (twin) Contact pressure Approx..N{gf} Approx..7N{gf} Approx..7N{gf} Approx..N{gf} Initial contact resistance, max Max. m (By voltage drop V DC A) Contact material Ag alloy (cd free) + Au flash AgNi type + Au clad Approx..7N{3gf} Nominal switching capacity (resistive load) A V AC 7A V AC 7A V AC A V AC 3A V AC Max. switching power (resistive load),va,7va,7va,va 7VA Max. switching voltage VAC Max. switching current A 7A 7A A 3A Nominal operating power AC (Hz):.3VA, AC (Hz):.VA, DC:. to.w Min. switching capacity (Reference value)* ma V DC A V DC Insulation resistance (Initial) Breakdown voltage (Initial) Between open contacts Between contact sets Between contact and coil Temperature rise (at 7 C F) Operate time (at C F)* Release time (at C F)* Shock resistance Vibration resistance Mechanical Functional Destructive Functional Destructive Electrical (resistive load) Conditions for operation, transport and storage* 3 Max. Operating speed Min.,M (at V DC) Measurement at same location as Initial breakdown voltage section. 7 Vrms for min. (Detection current: ma.) 7 Vrms for min. (Detection current: ma.), Vrms for min. (Detection current: ma.) Max. C (By resistive method, nominal voltage) Max. ms (Nominal voltage applied to the coil, excluding contact bounce time.) Max. ms (Nominal voltage applied to the coil, excluding contact bounce time.) (without diode) Min. m/s (Half-wave pulse of sine wave: ms; detection time: s.) Min. m/s (Half-wave pulse of sine wave: ms.) to Hz at double amplitude of mm (Detection time: s.) to Hz at double amplitude of mm Min. 7 : AC coil type (at cpm); Min. : DC coil type (at cpm) Min. (at cpm) Min. (at cpm) Min. (at cpm) Min. (at cpm) Min. (at cpm) Notes: In accordance with the Electrical Appliance and Material Safety Law, you cannot exceed a voltage of V AC when using the Form C type. For more information, please inquire. * This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the actual load. * For the AC coil types, the operate/release time will differ depending on the phase. *3 The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to. Usage, Storage and Transport Conditions in AMBIENT ENVIRONMENT section in Relay Technical Information. HC Ambient temperature: C to +7 C F to + F (without LED); C to + C F to + F (with LED) Humidity: to % R.H. (Not freezing and condensing at low temperature) cpm (at max. rating) Approx. g. oz 3. Switching capacity and expected life ) Electrical (at cpm) AC DC Load Resistive (cos = ) Inductive (cos.) Resistive Inductive Voltage V AC V AC V AC V AC V DC V DC Form C Form C 3 Form C Form C ) Mechanical (at cpm) Min. 7 (AC coil type); Min. (DC coil type) Expected life A A A 3A Min. 7A 7A 3A.A 3A A Min. A A A.A Min. 7A 7A 3.A A Min. A A.A.A 3A.A Min. 3A 3A.A A Min. 7A 7A Min. 3.A A Min. A A 3A.A Min. A A A A Min. 3A 3A A.A 3A.A Min. A A.A.A Min. Form C (twin) 3A 3A A.A 3A Min. ds_c_en_hc: D

REFERENCE DATA. Life curve Load: V AC resistive load.-() Switching capacity range (single contact type).-() Switching capacity range (-pole bifurcated (twin)) Life, times,, Mechanical life (DC type) Mechanical life (AC type) c ( V AC cosϕ = ) c 3c c Load current, A AC voltage, V ma ma HCc HCc, 3c A AC current HCc A A 7A AC voltage, V mv μa AC current A 3A A 3.-() Coil temperature rise ( Form C, AC type) Ambient temperature: C 77 F 7 3.-() Coil temperature rise ( Form C, AC type) Ambient temperature: C F 3.-(3) Coil temperature rise (3 Form C, AC type) Ambient temperature: C F (See note.) (See note.) (See note.) A 7A A A A Coil applied voltage, %V 3.-() Coil temperature rise ( Form C, AC type) Ambient temperature: to C to 7 F (See note.) 3.-(7) Coil temperature rise (3 Form C, DC type) Ambient temperature: C F 7 Coil applied voltage, %V 7A A A Coil applied voltage, %V A 3A A 7 7 ds_c_en_hc: D A A A Coil applied voltage, %V 3.-() Coil temperature rise ( Form C, DC type) Ambient temperature: C F 7 A A A Coil applied voltage, %V 3.-() Coil temperature rise ( Form C, DC type) Ambient temperature: 7 to C to F 7 A 3A A Coil applied voltage, %V 7 3.-() Coil temperature rise ( Form C, DC type) Ambient temperature: C F 7 7A A A Coil applied voltage, %V 7A A A Coil applied voltage, %V When the nominal voltage is applied to AC or V coil types respectively, the figures of coil temperature rise increase by approx. degrees to the ones shown on each graph.

DIMENSIONS(mm inch). Plug-in type CAD Data Interested in CAD data? You can obtain CAD data for all products with a from your local Panasonic Electric Works representative. Form C type.7.7...7.7.. 7..7 CAD Data Schematic (Bottom view) Standard type 7 mark 3..3.3.. 3 LED AC type 7 LED DC type 7.... 3.3....7.7 3 ( ) ( ) 3 ( ) (+) 7 3...3.3 General tolerance:.3. CAD Data Form C type...7.7.7.7.. 7..7 Schematic (Bottom view) Standard type 3.. 3.3...7 3 3..3.3.....3.3.. 3 ( ) LED AC type ( ) 3 ( ) LED DC type (+) General tolerance:.3. CAD Data 3 Form C type.7.7...7.7.. 7..7 Schematic (Bottom view) Standard type 7 3 3..3 3 7 3.3.... 3.3...7 3...3.3.. 3 ( ) 7 LED AC type 3 ( ) 7 3 ( ) LED DC type 3 (+) General tolerance:.3. ds_c_en_hc: D

CAD Data Form C and -pole bifurcated (twin) types...7.7.7.7.. 7..7 3 Standard type 3 7 3..3.3.. LED AC type 3 7 LED DC type 3 7..7.. 3.3...7 3. 7..3.3 3.. 3 ( ) ( ) 3 ( ) (+) General tolerance:.3. Schematic (Bottom view). PC board type CAD Data Form C type...7.7.7.7 3..3.3..... 3....3. 3.3....7.7. 7..3.3 3 3 7..7 The diagrams show the external dimensions of the Form C and -pole bifurcated (twin) types. For Form C, Form C, and 3 Form C, see diagrams at plug-in types (only the terminals are different). Types with. mm terminal width are also available. General tolerance:.3. PC board pattern..7 Form C Form C 3 Form C Form C.. 3.3....... - dia. hole -.7 dia. 3.3....... - dia. hole -.7 dia. 3.3....... - dia. hole -.7 dia...7.. 3.3....... - dia. hole -.7 dia. Schematic Same schematic as plug-in type HC relay Tolerance:.. ds_c_en_hc: D

3. TM type CAD Data Form C type 3... 3..3 3.3...7 3..3.3.....3.7...7 HC The diagrams show the external dimensions of the Form C and -pole bifurcated (twin) types. For Form C, Form C, and 3 Form C, see diagrams at plug-in types (only the terminals are different). 3 7 3.. 37..3 7..3.3 General tolerance:.3. Chassis (Panel) cutout -3. dia. -. dia. 37.. Tolerance:.. Schematic Same schematic as plug-in type HC relay Be aware that there is no LED indicator with CR circuit and built-in diode types. Chassis (Panel) cutout in tandem mounting 37.. Notes:. In mounting, use M3 screws and M3 washers.. When mounting TM types, use washers to prevent damage or distortion to the polycarbonate cover. 3. When tightening fixing screws, the optimum torque range should be. to. N m, (3 to kgf cm). Moreover, use washers to prevent loosening. 3..7.7.7 For Cautions for Use, see Relay Technical Information. ds_c_en_hc: D

SEALED CONSTRUCTION High reliability ensured in challenging environments. HC RELAYS AMBER SEALED TYPE Plug-in type PC board type TM type FEATURES. Even when left for long periods in challenging environments, resistance values for the contacts remain stable.. Compact yet compatible all over the world. 3. Can be used in a wide variety of applications.. With LED indication type also available. and mounting dimensions same as for HC relays Connection accessories (terminal sockets and sockets) also shared.. UL, CSA approval is standard Compliance also with Japanese Electrical Appliance and Material Control Law. TYPICAL APPLICATIONS. Where surrounding atmosphere is bad Cotton mills, flour mills, chemical works, traffic signals, etc.. In situations where high reliability is required Safety equipment, alarms, copiers, telecommunications devices, computers, etc. About Cd-free contacts We have introduced Cadmium free type products to reduce Environmental Hazardous Substances. (The suffix F should be added to the part number. The Suffix F is required only for Form C, Form C contact type. The Form C and Form C bifurcated (twin) contact type is originally cadmium-free, the suffix F is not required.) Please replace parts containing Cadmium with Cadmium-free products and evaluate them with your actual application before use because the life of a relay depends on the contact material and load. ORDERING INFORMATION HC Contact arrangement : Form C : Form C : Form C E: Amber sealed type ED: Amber sealed type bifurcated contact (twin) (Only Form C) Terminal arrangement H: L: HP: PL: Plug-in type Plug-in with LED indication PC board type PC board with LED indication HTM: TM type AC,,,, (/), (/), (/), (/) V DC,,,, (/) V Contact material Contact material Contact arrangement AgSnO type AgNi type Form C Form C F F Form C -pole bifurcated (twin) Nil Nil Note: UL/CSA approved type is standard. ds_c_en_hc: D

TYPES ) Plug-in type Form C Form C Form C Form C (twin) Part No. Part No. Part No. Part No. V AC HCE-H-ACV-F HCE-H-ACV-F HCE-H-ACV HCED-H-ACV V AC HCE-H-ACV-F HCE-H-ACV-F HCE-H-ACV HCED-H-ACV V AC HCE-H-ACV-F HCE-H-ACV-F HCE-H-ACV HCED-H-ACV V AC HCE-H-ACV-F HCE-H-ACV-F HCE-H-ACV HCED-H-ACV /V AC HCE-H-ACV-F HCE-H-ACV-F HCE-H-ACV HCED-H-ACV /V AC HCE-H-ACV-F HCE-H-ACV-F HCE-H-ACV HCED-H-ACV /V AC HCE-H-ACV-F HCE-H-ACV-F HCE-H-ACV HCED-H-ACV /V AC HCE-H-ACV-F HCE-H-ACV-F HCE-H-ACV HCED-H-ACV V DC HCE-H-DCV-F HCE-H-DCV-F HCE-H-DCV HCED-H-DCV V DC HCE-H-DCV-F HCE-H-DCV-F HCE-H-DCV HCED-H-DCV V DC HCE-H-DCV-F HCE-H-DCV-F HCE-H-DCV HCED-H-DCV V DC HCE-H-DCV-F HCE-H-DCV-F HCE-H-DCV HCED-H-DCV /V DC HCE-H-DCV-F HCE-H-DCV-F HCE-H-DCV HCED-H-DCV Standard packing: Carton: ; Case: HC ) Plug-in type (With LED indication) Form C Form C Form C Form C (twin) Part No. Part No. Part No. Part No. V AC HCE-L-ACV-F HCE-L-ACV-F HCE-L-ACV HCED-L-ACV V AC HCE-L-ACV-F HCE-L-ACV-F HCE-L-ACV HCED-L-ACV V AC HCE-L-ACV-F HCE-L-ACV-F HCE-L-ACV HCED-L-ACV V AC HCE-L-ACV-F HCE-L-ACV-F HCE-L-ACV HCED-L-ACV /V AC HCE-L-ACV-F HCE-L-ACV-F HCE-L-ACV HCED-L-ACV /V AC HCE-L-ACV-F HCE-L-ACV-F HCE-L-ACV HCED-L-ACV /V AC HCE-L-ACV-F HCE-L-ACV-F HCE-L-ACV HCED-L-ACV /V AC HCE-L-ACV-F HCE-L-ACV-F HCE-L-ACV HCED-L-ACV V DC HCE-L-DCV-F HCE-L-DCV-F HCE-L-DCV HCED-L-DCV V DC HCE-L-DCV-F HCE-L-DCV-F HCE-L-DCV HCED-L-DCV V DC HCE-L-DCV-F HCE-L-DCV-F HCE-L-DCV HCED-L-DCV V DC HCE-L-DCV-F HCE-L-DCV-F HCE-L-DCV HCED-L-DCV /V DC HCE-L-DCV-F HCE-L-DCV-F HCE-L-DCV HCED-L-DCV Standard packing: Carton: ; Case: 3) PC board type Form C Form C Form C Form C (twin) Part No. Part No. Part No. Part No. V AC HCE-HP-ACV-F HCE-HP-ACV-F HCE-HP-ACV HCED-HP-ACV V AC HCE-HP-ACV-F HCE-HP-ACV-F HCE-HP-ACV HCED-HP-ACV V AC HCE-HP-ACV-F HCE-HP-ACV-F HCE-HP-ACV HCED-HP-ACV V AC HCE-HP-ACV-F HCE-HP-ACV-F HCE-HP-ACV HCED-HP-ACV /V AC HCE-HP-ACV-F HCE-HP-ACV-F HCE-HP-ACV HCED-HP-ACV /V AC HCE-HP-ACV-F HCE-HP-ACV-F HCE-HP-ACV HCED-HP-ACV /V AC HCE-HP-ACV-F HCE-HP-ACV-F HCE-HP-ACV HCED-HP-ACV /V AC HCE-HP-ACV-F HCE-HP-ACV-F HCE-HP-ACV HCED-HP-ACV V DC HCE-HP-DCV-F HCE-HP-DCV-F HCE-HP-DCV HCED-HP-DCV V DC HCE-HP-DCV-F HCE-HP-DCV-F HCE-HP-DCV HCED-HP-DCV V DC HCE-HP-DCV-F HCE-HP-DCV-F HCE-HP-DCV HCED-HP-DCV V DC HCE-HP-DCV-F HCE-HP-DCV-F HCE-HP-DCV HCED-HP-DCV /V DC HCE-HP-DCV-F HCE-HP-DCV-F HCE-HP-DCV HCED-HP-DCV Standard packing: Carton: ; Case: Note: The PC board. mm width terminal type is also available, please part number. suffix 3 is needed when ordering ( Form C, Form C (twin) only) ds_c_en_hc: D

) PC board type (With LED indication) Form C Form C Form C Form C (twin) Part No. Part No. Part No. Part No. V AC HCE-PL-ACV-F HCE-PL-ACV-F HCE-PL-ACV HCED-PL-ACV V AC HCE-PL-ACV-F HCE-PL-ACV-F HCE-PL-ACV HCED-PL-ACV V AC HCE-PL-ACV-F HCE-PL-ACV-F HCE-PL-ACV HCED-PL-ACV V AC HCE-PL-ACV-F HCE-PL-ACV-F HCE-PL-ACV HCED-PL-ACV /V AC HCE-PL-ACV-F HCE-PL-ACV-F HCE-PL-ACV HCED-PL-ACV /V AC HCE-PL-ACV-F HCE-PL-ACV-F HCE-PL-ACV HCED-PL-ACV /V AC HCE-PL-ACV-F HCE-PL-ACV-F HCE-PL-ACV HCED-PL-ACV /V AC HCE-PL-ACV-F HCE-PL-ACV-F HCE-PL-ACV HCED-PL-ACV V DC HCE-PL-DCV-F HCE-PL-DCV-F HCE-PL-DCV HCED-PL-DCV V DC HCE-PL-DCV-F HCE-PL-DCV-F HCE-PL-DCV HCED-PL-DCV V DC HCE-PL-DCV-F HCE-PL-DCV-F HCE-PL-DCV HCED-PL-DCV V DC HCE-PL-DCV-F HCE-PL-DCV-F HCE-PL-DCV HCED-PL-DCV /V DC HCE-PL-DCV-F HCE-PL-DCV-F HCE-PL-DCV HCED-PL-DCV Standard packing: Carton: ; Case: Note: The PC board. mm width terminal type is also available, please part number. suffix 3 is needed when ordering ( Form C, Form C (twin) only) ) TM type Form C Form C Form C Form C (twin) Part No. Part No. Part No. Part No. V AC HCE-HTM-ACV-F HCE-HTM-ACV-F HCE-HTM-ACV HCED-HTM-ACV V AC HCE-HTM-ACV-F HCE-HTM-ACV-F HCE-HTM-ACV HCED-HTM-ACV V AC HCE-HTM-ACV-F HCE-HTM-ACV-F HCE-HTM-ACV HCED-HTM-ACV V AC HCE-HTM-ACV-F HCE-HTM-ACV-F HCE-HTM-ACV HCED-HTM-ACV /V AC HCE-HTM-ACV-F HCE-HTM-ACV-F HCE-HTM-ACV HCED-HTM-ACV /V AC HCE-HTM-ACV-F HCE-HTM-ACV-F HCE-HTM-ACV HCED-HTM-ACV /V AC HCE-HTM-ACV-F HCE-HTM-ACV-F HCE-HTM-ACV HCED-HTM-ACV /V AC HCE-HTM-ACV-F HCE-HTM-ACV-F HCE-HTM-ACV HCED-HTM-ACV V DC HCE-HTM-DCV-F HCE-HTM-DCV-F HCE-HTM-DCV HCED-HTM-DCV V DC HCE-HTM-DCV-F HCE-HTM-DCV-F HCE-HTM-DCV HCED-HTM-DCV V DC HCE-HTM-DCV-F HCE-HTM-DCV-F HCE-HTM-DCV HCED-HTM-DCV V DC HCE-HTM-DCV-F HCE-HTM-DCV-F HCE-HTM-DCV HCED-HTM-DCV /V DC HCE-HTM-DCV-F HCE-HTM-DCV-F HCE-HTM-DCV HCED-HTM-DCV Standard packing: Carton: ; Case: RATING. Coil data (Common for standard types). Specifications Characteristics Item Specifications Form C Form C Form C Form C (twin) Contact Arrangement Form C Form C Form C Form C Nominal switching capacity (resistive load) A V AC 3A V AC A V AC A V AC Max. switching power (resistive load),va 7VA VA VA Rating Max. switching voltage VAC VAC VAC VAC Max. switching current A 3A A A Min. switching capacity (Reference value)* ma mv DC A mv DC Electrical characteristics Temperature rise (at C F) Max. C (By resistive method, nominal voltage) Expected life Electrical Min. resistive load (at cpm) Conditions Conditions for operation, transport and storage* Ambient air pressure 7mmHg % (,3mb %) Notes:Other specifications are same as standard types. *This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the actual load. *The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value.refer to. Usage, Storage and Transport Conditions in AMBIENT ENVIRONMENT section in Relay Technical Information.. 3. Switching capacity and expected life ) Electrical (at cpm) ) Mechanical (at cpm) Min. 7 (AC coil type); Min. (DC coil type) Ambient temperature: C to + C F to + F; Humidity: to % R.H. (Not freezing and condensing at low temperature) Load AC DC Resistive (cos = ) Inductive (cos.) Resistive Inductive Expected life Voltage V AC V AC V AC V AC V DC V DC HCE A A 3A A Min. HCE 3A 3A A.7A Min. HCE A A A.A Min. HCED ( Form C twin) A A Min. 3 ds_c_en_hc: D

REFERENCE DATA.-() Switching capacity range (single contact type) AC voltage, V V V V ma HCE HCE HCE A A3A A A AC current.-() Coil temperature rise ( Form C AC type) Ambient temperature: C F 7 Voltage applied to coil, %V.-() Coil temperature rise ( Form C DC type) Ambient temperature: C F 7 3A Voltage applied to coil, %V DIMENSIONS HC relays are unified to standard sizes. Please refer to standard type information. A.-() Switching capacity range (-pole bifurcated (twin)) AC voltage, V mv μa AC current A 3A A.-(3) Coil temperature rise ( Form C AC type) Ambient temperature: C F 7 A Voltage applied to coil, %V Note: Coil temperature rise When the nominal voltage is applied to AC or V coil types respectively, the figures of coil temperature rise increase by approx. degrees to the ones shown on each graph. NOTES When mounting TM types, use washers to prevent damage or distortion to the polycarbonate cover. When tightening fixing screws, the optimum torque range should be. to. N m, (3 to kgf cm). If screws are over tightened, the cover may distort, resulting in poor sealing. Moreover, to prevent loosening, use washers. HC.-() Coil temperature rise ( Form C AC type) Ambient temperature: C F 7 A Voltage applied to coil, %V.-() Coil temperature rise ( Form C DC type) Ambient temperature: C F 7 A A Voltage applied to coil, %V For Cautions for Use, see Relay Technical Information. ds_c_en_hc: D

MAGNETIC MEMORY TYPE HC RELAY HC LATCHING (KEEP) RELAYS FEATURES. Energy-saving type. Wide range of applications in control circuits for industrial equipment and consumer devices. 3. Form factors same as for HC relays. With operation indicator. Can be used in a wide variety of applications. About Cd-free contacts We have introduced Cadmium free type products to reduce Environmental Hazardous Substances. (The suffix F should be added to the part number.) Please replace parts containing Cadmium with Cadmium-free products and evaluate them with your actual application before use because the life of a relay depends on the contact material and load. TYPES Plug-in type Part No. HCK-ACV-F HCK-ACV-F HCK-ACV-F HCK-ACV-F HCK-ACV-F HCK-DCV-F HCK-DCV-F HCK-DCV-F HCK-DCV-F HCK-DCV-F PC board type Part No. HCK-P-ACV-F HCK-P-ACV-F HCK-P-ACV-F HCK-P-ACV-F HCK-P-ACV-F HCK-P-DCV-F HCK-P-DCV-F HCK-P-DCV-F HCK-P-DCV-F HCK-P-DCV-F Standard packing: Carton: ; Case: Notes:. Some materials and price vary. Please inquire for details.. Please refer to the standards chart for information on compliance with international standards. RATING. Coil data ) AC coils (/Hz) Contact arrangement Form C Nominal coil voltage Set voltage (at C F) Reset voltage (at C F) Nominal operating current [ %] (at C F) Reset Set coil coil N.C. codition Set coil Coil inductance N.O. condition N.C. codition Reset coil N.O. condition Nominal operating power Set coil V AC ma 3mA.3VA.VA V AC V AC V AC %V or less of nominal voltage (Initial) %V or less of nominal voltage (Initial) ma ma.ma ma.ma.ma.va.va.va.va.va.va V AC 3.3mA 7.mA.33VA.7VA Reset coil Max. allowable voltage (at C F) %V of nominal voltage ds_c_en_hc: D

) DC coils Contact arrangement Form C Nominal coil voltage Set voltage (at C F) Reset voltage (at C F) Nominal operating current [ %] (at C F) Coil resistance [ %] (at C F) Nominal operating power Set coil Reset coil Set coil Reset coil Set coil Reset coil V DC 7mA 7mA.W.W V DC %V or less of %V or less of ma.ma.w.3w V DC nominal voltage nominal voltage.ma.ma 7.3W.W V DC (Initial) (Initial).3mA 3.7mA,7 3,.W.W V DC.mA.mA, 7,.W.W Notes:. The allowable coil resistance range is % when within, and % when., or higher.. The maximum allowable voltage is the maximum voltage fluctuation value for the coil power supply. This value is not a permissible value for continuous operation. (This value differs depending on the ambient temperature. Please contact us for details.) HC Max. allowable voltage (at C F) %V of nominal voltage. Specifications Characteristics Item Specifications Contact Contact pressure Approx..N{gf} Initial contact resistance, max Max. m (By voltage drop V DC A) Nominal switching capacity (resistive load) 3A V AC Max. switching power (resistive load) 7VA Rating Max. switching current 3A Nominal operating power Set coil:.va to.33va; Reset coil:.va to.va Min. switching capacity (Reference value)* A mv DC Electrical characteristics Breakdown voltage (Initial) Between contact and coil, Vrms for min. (initial) Temperature rise Set coil: Max. C; Reset coil: Max. C (at nominal voltage) Set time/reset time (at C F) Approx. ms/ms (at nominal voltage) Mechanical Shock resistance Functional Min. m/s characteristics (Half-wave pulse of sine wave: ms; detection time: s.) Mechanical Min. Expected life 7 (at cpm) Electrical Min. rated load (at cpm) Conditions Ambient temperature C to + C F to + F (Not freezing and condensing at low temperature) Notes:*This value can change due to the switching frequency, environmental conditions and desired reliability level, therefore it is recommended to check this with the actual load..other specifications are same as standard types. REFERENCE DATA Coil temperature rise Tested sample: HCK-DCV, pcs Ambient temperature: C. F 7 3A A Coil applied voltage, %V ds_c_en_hc: D

DIMENSIONS(mm inch) Plug-in type ( Form C) CAD Data Interested in CAD data? You can obtain CAD data for all products with a from your local Panasonic Electric Works representative..7 3..3.3 7..7 CAD Data mark Schematic (Bottom view) DC type AC type + 3 Reset + Set 3 Reset Set 3.3...7 3 7 3......7...3.3..7.. General tolerance:.3. PC board type ( Form C) CAD Data MOUNTING METHOD The mounting method and mounting holes can all be made the same as for the Form C HC relay terminal socket..7.. 3.3...7 3 7 3 3..3.3 3..3..7...3.3..7.. 7..7 General tolerance:.3. NOTES. The schematic differs from that in the standard type Form C HC relay. Follow the schematic on the cover sticker.. Conform with the schematic for the DC type, which has a polarized coil. 3. Because retention characteristics vary according to the waveform of the voltage applied to the coil, do your best to avoid capacitor driving. In capacitor driving, use a capacitor of F or more. Schematic (Bottom view) DC type AC type + 3 Reset + Set 3 Reset Set PC board pattern (Bottom view) - dia. hole -.7 dia. hole..7.7.. 3.3. Idle terminal (hole needed)..... 7...7 Tolerance:... Ensure that the minimum pulse width of voltage applied to coil is greater than ms. For Cautions for Use, see Relay Technical Information. 7 ds_c_en_hc: D

Has built-in diode to absorb surge For use in semiconductor circuits HC RELAY WITH DIODE HC FEATURES. The built-in diode absorbs surge voltage arising when the coil goes to the off state (for DC type). Diode characteristics; Reverse breakdown voltage:,v, Forward current: A. With LED indicator type also available 3. UL, CSA approval is standard Compliance also with Japanese Electrical Appliance and Material Control Law. TYPICAL APPLICATIONS Suitable for factory automation equipment and automotive devices. Control panels, power supply equipment, molding equipment, machine tools, welding equipment, agricultural equipment, etc.. Office equipment, automatic vending machines, telecommunications equipment, disaster prevention equipment, copiers, measuring devices, medical equipment, amusement devices, etc. 3. All types of household appliance About Cd-free contacts We have introduced Cadmium free type products to reduce Environmental Hazardous Substances. (The suffix F should be added to the part number. The Suffix F is required only for Form C, Form C, 3 Form C contact type. The Form C and Form C bifurcated (twin) contact type is originally cadmium-free, the suffix F is not required.) Please replace parts containing Cadmium with Cadmium-free products and evaluate them with your actual application before use because the life of a relay depends on the contact material and load. TYPES ) Plug-in type Form C Form C 3 Form C Form C Form C (twin) Part No. Part No. Part No. Part No. Part No. V DC HC-DCV-D-F HC-DCV-D-F HC3-DCV-D-F HC-DCV-D HCD-DCV-D V DC HC-DCV-D-F HC-DCV-D-F HC3-DCV-D-F HC-DCV-D HCD-DCV-D V DC HC-DCV-D-F HC-DCV-D-F HC3-DCV-D-F HC-DCV-D HCD-DCV-D V DC HC-DCV-D-F HC-DCV-D-F HC3-DCV-D-F HC-DCV-D HCD-DCV-D /V DC HC-DCV-D-F HC-DCV-D-F HC3-DCV-D-F HC-DCV-D HCD-DCV-D Standard packing: Carton: ; Case: ) Plug-in type (with LED indication) Form C Form C 3 Form C Form C Form C (twin) Part No. Part No. Part No. Part No. Part No. V DC HC-L-DCV-D-F HC-L-DCV-D-F HC3-L-DCV-D-F HC-L-DCV-D HCD-L-DCV-D V DC HC-L-DCV-D-F HC-L-DCV-D-F HC3-L-DCV-D-F HC-L-DCV-D HCD-L-DCV-D V DC HC-L-DCV-D-F HC-L-DCV-D-F HC3-L-DCV-D-F HC-L-DCV-D HCD-L-DCV-D V DC HC-L-DCV-D-F HC-L-DCV-D-F HC3-L-DCV-D-F HC-L-DCV-D HCD-L-DCV-D /V DC HC-L-DCV-D-F HC-L-DCV-D-F HC3-L-DCV-D-F HC-L-DCV-D HCD-L-DCV-D Standard packing: Carton: ; Case: ds_c_en_hc: D

RATING. Coil data (Common for standard DC coil types). Specifications Characteristics Item Specifications Ambient temperature: C to + C F to + F Conditions Conditions for operation, transport and storage* Humidity: to % R.H. (Not freezing and condensing at low temperature) Notes: Other specifications are same as standard types. *The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to. Usage, Storage and Transport Conditions in AMBIENT ENVIRONMENT section in Relay Technical Information. REFERENCE DATA.-() DC coil surge voltage waveform (without diode).-() DC coil surge voltage waveform (with diode) Diode characteristics; Reverse breakdown voltage:,v, Forward current: A ON OFF ON OFF V + DCV - To digital memory ( + DCV - To digital memory Reverse breakdown voltage:, V Forward current: A ( DIMENSIONS Same dimensions as HC relay standard/ plug-in type Schematic Without LED indicator 3 7 3 + With LED indicator 3 7 3 + Protection (surge-absorbing) diode LED Protection (surge-absorbing) diode NOTES. Pay attention to the polarity.. Diode characteristics Reverse breakdown voltage:,v Forward current: A For Cautions for Use, see Relay Technical Information. ds_c_en_hc: D

Able to absorb surge voltage in AC specification CR circuit is built-in HC RELAYS WITH CR HC FEATURES. With CR circuits built in, surge voltage arising in the AC type when the coil goes to the off state is absorbed.. HC relay with LED indication type also available 3. UL, CSA approval is standard Compliance also with Japanese Electrical Appliance and Material Control Law. TYPICAL APPLICATIONS Suitable for factory automation equipment and automotive devices. Control panels, power supply equipment, molding equipment, machine tools, welding equipment, agricultural equipment, etc.. Office equipment, automatic vending machines, telecommunications equipment, disaster prevention equipment, copiers, measuring devices, medical equipment, amusement devices, etc. About Cd-free contacts We have introduced Cadmium free type products to reduce Environmental Hazardous Substances. (The suffix F should be added to the part number. The Suffix F is required only for Form C, Form C, 3 Form C contact type. The Form C and Form C bifurcated (twin) contact type is originally cadmium-free, the suffix F is not required.) Please replace parts containing Cadmium with Cadmium-free products and evaluate them with your actual application before use because the life of a relay depends on the contact material and load. TYPES ) Plug-in type Form C Form C 3 Form C Form C Form C (twin) Part No. Part No. Part No. Part No. Part No. /V AC HC-ACV-R-F HC-ACV-R-F HC3-ACV-R-F HC-ACV-R HCD-ACV-R /V AC HC-ACV-R-F HC-ACV-R-F HC3-ACV-R-F HC-ACV-R HCD-ACV-R /V AC HC-ACV-R-F HC-ACV-R-F HC3-ACV-R-F HC-ACV-R HCD-ACV-R /V AC HC-ACV-R-F HC-ACV-R-F HC3-ACV-R-F HC-ACV-R HCD-ACV-R Standard packing: Carton: ; Case: ) Plug-in type (with LED indication) Form C Form C 3 Form C Form C Form C (twin) Part No. Part No. Part No. Part No. Part No. /V AC HC-L-ACV-R-F HC-L-ACV-R-F HC3-L-ACV-R-F HC-L-ACV-R HCD-L-ACV-R /V AC HC-L-ACV-R-F HC-L-ACV-R-F HC3-L-ACV-R-F HC-L-ACV-R HCD-L-ACV-R /V AC HC-L-ACV-R-F HC-L-ACV-R-F HC3-L-ACV-R-F HC-L-ACV-R HCD-L-ACV-R /V AC HC-L-ACV-R-F HC-L-ACV-R-F HC3-L-ACV-R-F HC-L-ACV-R HCD-L-ACV-R Standard packing: Carton: ; Case: RATING. Coil data (Common for standard AC coil types). Specifications Characteristics Item Specifications Electrical characteristics Temperature rise Max. C (By resistive method, nominal voltage, rated current at C) Conditions Conditions for operation, transport and storage* Ambient temperature: C to + C F to + F Humidity: to % R.H. (Not freezing and condensing at low temperature) Notes: Other specifications are same as standard types. *The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to. Usage, Storage and Transport Conditions in AMBIENT ENVIRONMENT section in Relay Technical Information. ds_c_en_hc: D

REFERENCE DATA.-() AC coil surge voltage waveform (with CR circuit) Tested sample: HC-ACV-R.-() AC coil surge voltage waveform (without CR circuit) Tested sample: HC-ACV V V.ms V 3.ms.ms V ACV To digital memory ACV To digital memory DIMENSIONS (Unit: mm inch) Plug-in type Form C.7 7..7.3. dimensions and schematic of the Form C and -pole bifurcated (twin) types. For the Form C, Form C, and 3 Form C types, only the terminals differ. The dimensions of the terminal are the same as for standard type HC relays..3 3 7 3....7...3.3......7 3.3. General tolerance:.3. Schematic Without LED indicator With LED indicator 3 7 3 3 7 3 Diagrams show the external Connection accessories Connection accessories (terminal sockets and sockets) are the same as for standard type HC relays. To hold the relay in place, use the hold-down clip that is provided. For Cautions for Use, see Relay Technical Information. ds_c_en_hc: D

ACCESSORIES (Sockets and Terminal sockets) HC RELAY ACCESSORIES HC HC RELAY SOCKETS. Plug-in type sockets, PC board type sockets, and wrapping type sockets are available for HC relays.. In the table below, the socket suitable for each type of HC relay is indicated by a black dot. 3. UL/CSA approval is standard.. A hold-down clip is included in the package. The fixing method is the same as for HC sockets, ordinary HC terminal sockets and HL sockets. HC/HL-LEAF-SPRING-MK SOCKET SELECTOR CHART Type No. of pole Item Part No. Applicable HC relay (Plug-in type) Standard/Bifurcated contact (DC) Amber Form C Form C 3 Form C Form C Form C (twin) Form C Form C Form C Form C (twin) Keep relay Form C Plug-in PC board Wrapping -pole HC-socket HC-SS-K //-pole (common) -pole -pole 3-pole //-pole (common) //-pole (common) HC-socket HC-SS-K HC-socket for PC board HC-socket for PC board HC3-socket for PC board HC-socket for PC board Notes:. Use the retainer that is shipped with the terminal socket.. UL/CSA approved type is standard (except for wrapping socket). HC-PS-K HC-PS-K HC3-PS-K HC-PS-K HC-wrapping socket HC-WS-K HC RELAY TERMINAL SOCKETS. Ordinary terminal sockets and terminal sockets for DIN rail assembly are available.. In the table below, the terminal socket suitable for each type of HC relay is indicated by a black dot. 3. UL/CSA approval is standard.. A hold-down clip is included in the package. Ordinary terminal socket The fixing method is the same as for sockets. HC/HL-LEAF-SPRING-MK Terminal sockets for DIN rail assembly The fixing method is the same as for the HC DIN rail terminal sockets and the HL DIN terminal sockets. HC/HL-LEAF-SPRING-K ds_c_en_hc: D

TERMINAL SOCKET SELECTOR CHART Type For DIN rail For general No. of pole Item Part No. -pole HC-slim type DIN terminal socket HC-SFD-S -pole HC-DIN HC-SFD-K 3-pole HC3-DIN HC3-SFD-K //-pole (common) -pole 3-pole //-pole (common) HC-DIN high terminal socket HC-terminal socket HC3-high terminal socket HC-high terminal socket HC-SFD-K HC-SF-K HC3-HSF-K HC-HSF-K Packing quantity Applicable HC relay (Plug-in type) Standard/Bifurcated contact (DC) Amber Carton Case Form C Form C 3 Form C Form C Form C (twin) Form C Form C Form C Form C (twin) Notes:. Use the retainer that is shipped with the terminal socket.. UL/CSA approved type is standard (except for HC-TSF-K). 3. In order to prevent breakage and disfiguring, the screw tightening torque for the terminal socket should be within the range of. to. N m { to 7kgf cm}. Keep relay Form C DIMENSIONS (Unit: mm inch). Plug-in type sockets HC-Socket (HC-SS-K) HC-Socket (HC-SS-K) General tolerance:.3. 3 7 3..7.....3.3.7..3... 7...7.7..7....3 7..7 General tolerance:.3. 3 7 3..7.....3.3.7..3... 7....7.7..7....3 7..7 Mounting hole diagram Side-by-side installation With a relay mounted (HC-SS-K)...........3. General tolerance:.. Notes:. Applicable chassis board thickness is. to. mm.. Installation is easy by inserting the socket from the top into the holes and by depressing the two down arrows on the retention fitting from the front. Hold-down clip is packaged with the socket. 3 ds_c_en_hc: D

. PC board type sockets HC- PC board type socket (HC-PS-K) HC- PC board type socket (HC-PS-K) HC 3 7 3..7.....3.3..7.7 3.....7.7..7..3 7..7 3 7 3..7.....3.3.7..7 3.. 3.. 3.3...3 7..7 General tolerance:.3. 3.. General tolerance:.3. HC3- PC board type socket (HC3-PS-K) HC- PC board type socket (HC-PS-K) 7 3 3..7....7 3.3.....3...7. 3 7 3..7.....3.3.7....7.7..7 7..7..3.7 3....3 General tolerance:.3. PC board pattern (Bottom view) With a relay mounted General tolerance:.3. 3.. Side-by-side installation.. 7..77 Hold-down clip is packaged with the socket. Form C Form C 3 Form C Form C.......................... 3.3...3 3.3. dia. ho.7 dia..7.. 3.3. - dia. hole 3.3 -.7 dia.. - dia. hole -.7 dia. - dia. hole. 3.3 -.7 dia..7... 3.3. - dia. hole -.7 dia. General tolerance:.. ds_c_en_hc: D

3. Wrapping type sockets Standard wrapping type sockets (HC-WS-K).... 3.3...7.±..3±. Hold-down clip (Hold-down clip is packaged with the socket)...3..7...7.... 3..3 Terminal cross section ±..3±..±..3±...3 ±..3±. General tolerance:.3. Note: The external and mounting dimensions are the same for -pole (HC-WS-K), -pole (HC-WS-K), and 3-pole (HC3-WS-K) types. Only the number of terminals varies. Mounting hole diagram Side-by-side installation...........3. General tolerance:.. Notes:. Applicable chassis board thickness is. to. mm.. Installation is easy by inserting the socket from the top into the holes and by depressing the two down arrows on the retention fitting from the front.. Terminal sockets for DIN rail assembly HC-Slim type terminal sockets for DIN rail assembly (HC-SFD-S) ±..±. 3.3±..±. M3 screw M. screw ±..77±. Schematic N.C. N.O..±..±..3±..±..±..±. ±..7±. 7±.±.3 ±..3±..±.3.±. 7±.3±.3 3.±..3±. COM.3.±.3 ±.±. ± ±.3.3±. 3 General tolerance:.. Coil ds_c_en_hc: D

HC-high terminal socket for DIN rail assembly (HC-SFD-K) Schematic 3.3±..±. ±..±. M3 screw M. screw.±..3±. N.C. N.O..±..±..3±..±..±..±. ±..7±..±.3.±. 7±.3±.3 COM.3 ±..±. 3 General tolerance:.. Coil HC3-high terminal socket for DIN rail assembly (HC3-SFD-K) ±..±. M3 screw M. screw.±..3±. Schematic 3 N.C. N.O..±..±..3±. ±..3±. ±..7±..±..±.3.±. 7±.3±.3 7 COM.. ±..±. Coil 3 General tolerance:.. HC-high terminal socket for DIN rail assembly (HC-SFD-K).±..7±. ±..±. 3.3±..±. M3 screw M. screw.±..3±. Schematic 3 N.C. 7 N.O..±..±..3±..±..±..±. ±..7±..±.3.±. 7±.3±.3 3 COM Coil.3 ±..±. General tolerance:.. Mounting hole diagram HC-Slim type HC, HC3 and HC HC vertical type With a relay mounted (HC-SFD-K).3 ±. ±..±..±....7 7 -M3. screw hole.3 (or.±. dia. hole) 7±. -M.3 screw hole.±. (or.±. dia. hole).3.....7 7.3 33..3 -M3. screw hole (or.±. dia. hole) -M.3 screw hole (or.±. dia. hole) Panel hole dimensions for side-by-side mounting..37.......7.33 7.3 Panel hole dimensions for side-by-side mounting -M3. screw hole (or.±. dia. hole) -M.3 screw hole (or.±. dia. hole) General tolerance:.. Hold-down clip is packaged with the terminal socket. ds_c_en_hc: D

. Ordinary terminal sockets HC-terminal socket (HC-SF-K for HC) Schematic -. over hole -..7.7.. 7.. 3.7 M3 screw M. screw..7. General tolerance:.. HC3-high terminal socket (HC3-HSF-K) suitable for both HC and HC3 -. over hole -..3.... Schematic 7 3 3.. 7.3 3 M3 screw M. screw....3..3 7.. Screw hole dimensions General tolerance:.. HC-high terminal socket (HC-HSF-K) suitable for HC, and -. over hole -..3.... Schematic 3 3.. 7.3 M3 screw M. screw....3. 7..3. Screw hole dimensions 3 7 General tolerance:.. Mounting hole diagram HC-SF-K HC3-HSF-K and HC-HSF-K With a relay mounted (HC-SF-K) 3.7..7 -M3. screw hole.. (or.±. dia. hole).. -M.3 screw hole.. (or.±. dia. hole).7 3.. 7.3...7...7 -M3. screw hole (or.±. dia. hole) -M.3 screw hole (or.±. dia. hole) Hold-down clip is packaged with the terminal socket. Panel hole dimensions for side-by-side mounting Panel hole dimensions for side-by-side mounting General tolerance:.. 7 ds_c_en_hc: D