PATENTED NO WELD SYSTEM! Patented no weld aluminium batten system Various batten sizes snap onto simple fixing clip Fit to face of walls and ceilings or between pillars or posts Cut to size system with a quick and easy excel quote/order calculator Fast and easy install Four colour finishes available BATTEN SIZES AVAILABLE 6mm D x 7mm W mm D x mm W mm D x 0mm W 70mm D x 0mm W 00mm D x 0mm W CUT TO SIZE SERVICE Simply advise desired sizes FINISHES AVAILABLE Monument Woodland Grey Pearl White Western Red Cedar Timber image
SYSTEM OVERVIEW With PATENTED Xpress Battens, achieve a visually stunning finish with easy installation! Screw fixing clip to wall or horizontal rail Snap on desired batten Fit aluminium caps (top push in / bottom screw fix) PATENTED NO WELD SYSTEM! Bracket can be rotated in any direction for bottom or side fixing ALSO AVAILABLE FOR FIXING DIRECTLY TO A WALL, CEILING OR EXISTING RAILS VARIOUS STYLES CAN BE ACHIEVED MIX & MATCH BATTEN SIZES & GAPS Matching sizes Varied sizes Double battens Battens come standard with x aluminium caps per batten (top and bottom) xmm horizontal rail comes with x fixing brackets as standard
Battens & accessories 6x7mm batten HB-90 () HB-90 (Timber image) xmm batten HB-8 (Woodland grey) HB-88 (Monument) HB-80 (White) HB-89 (Western red cedar) x0mm batten HB-87 (Woodland grey) HB-8 (Monument) HB-8 (White) HB-86 (Western red cedar) 70x0mm batten HB-8 (Woodland grey) HB-88 (Monument) HB-89 (White) HB-8 (Western red cedar) 00x0mm batten HB-87 (Woodland grey) HB-8 (Monument) HB-8 (White) HB-86 (Western red cedar) xmm horiz. rail HB-89 (Woodland grey) HB-87 (Monument) HB-860 (White) HB-88 (Western red cedar) 6x7mm end cap & plate SC-060 (Woodland grey) SC-06 (Monument) SC-06 (White) SC-06 (Western red cedar) xmm end cap & plate HB-86 (Woodland grey) HB-86 (Monument) HB-86 (White) HB-876 (Western red cedar) x0mm end cap & plate HB-866 (Woodland grey) HB-86 (Monument) HB-867 (White) HB-86 (Western red cedar) 70x0mm end cap & plate HB-870 (Woodland grey) HB-868 (Monument) HB-87 (White) HB-869 (Western red cedar) 00x0mm end cap & plate HB-8 (Woodland grey) HB-8 (Monument) HB-86 (White) HB-8 (Western red cedar) Open side batten brackets pack - HB-878 (Woodland grey) HB-877 (Monument) HB-879 (White) HB-880 (Western red cedar) Rail screws Bag of 00 End plate screws Pack of 0 NOTE: End caps, end plates and batten brackets are supplied as standard with custom orders. Only use order codes when extra stock is needed.
Hinged gate components See page for battens and accessories Profile Optional extras Description Profile Description Gate side frames with inner & outer infill Code: HB-9 () SC-06 (Western red cedar) Top cap NOTE: Top caps are supplied as standard. Hex head screws g x 6mm (Pack of 7) NOTE: Screws are supplied as standard. 6mm x mm heavy duty top/bottom rail * Comes with gate side frame when gate is over 000mm wide (00mm wide if using 6x7mm battens) Rail screws Bag of 00 Tru close heavy duty hinges (Rated for gates up to 70kg) Code: SLHSTRATE Lokk latch deluxe Code: SLLD D&D latch packer (Only required if using a D&D Lokk Latch Deluxe latch - Supplied as standard with gate) hinge set Code: SC-0 Heavy duty ball bearing hinge For gates over 000mm wide (00mm wide if using 6x7mm battens) Code: SC-0 (Left hand hinge) SC-0 (Right hand hinge) IMPORTANT NOTE Maximum gate width: 00mm wide x 000mm high (Height may be increased depending on batten size used) Gates wider than 00mm will come with midrail (excluding gates using 6x7mm battens) D&D latch packer must be used to allow screw to pass through void in gate side frame If packer is not installed, screw may clash with interior wall of gate side frame D&D latch packer
Sliding gate components See page for battens and accessories Gate side frame with infill HB-9 () SC-06 (Western red cedar) Bottom rail HB-9 () SC-06 (Western red cedar) Top rail HB-9 () SC-06 (Western red cedar) 6x6mm steel post SC-06 (Black) SC-06 (Woodland grey) SC-060 (Monument) SC-06 (Silver) SC-06 (Surfmist) x Gate frame cap Supplied with gate side frame Slide guide SC-070 Gate side frame screws Supplied with gate side frame U catch SC-068 (U catch) x Gate stop SC-07 Gate wheel SC-07 Wheel clamping set SC-069 Sliding gate track SC-07 (m long) Track pins SC-066