A few notes about PDF patterns from Designs by Jude.... This PDF pattern requires legal size paper (8.5 x 14 ) or A4 size paper (8.27 x 11.69, 210mm x 297mm). It will not print on standard letter. Patterns containing larger pieces will need to be taped together before cutting out the fabric. Be advised that this document needs to be printed to it s original scale. Please ensure that the printing options below are not selected. Do Not: Rotate and Center, Fit to Page, Reduce to Fit or adjust the scale of this document. Refer to the scale marker below to ensure that this copy is printed at the correct scale. This PDF pattern is not licensed for commercial use and may not be shared, duplicated or distributed. 2016 Designs by Jude, All RIGHTS RESERVED. Personal use only. Not licensed for commercial use. 1 or 25.4mm 1 or 25.4mm
Designs by Jude Dazzling for Tyler Designed by Tamara Casey www.fletcherpatterncompany.com TW 107 $12.95US
Designs By Jude Dazzling For 16 Tyler Fabric & Notions: taffeta, silk, satin, light weight velvet. 1/8 elastic, snaps, and trim. Floor Length Gown with Sash Make darts in the bodice front. Press dart open. Make darts in bodice back sections. Sew back sections to the bodice front at the side seams. Prepare the bodice lining the same as above. With right sides together, sew bodice lining to the bodice at the upper edge and left back opening. Clip seam, turn and press. Finish raw edges of the right back opening with a zigzag stitch or serger. Baste lining and bodice together close to the lower edge. Sew the back sections of the skirt to the front at the side seams. Finish lower edge of the skirt with a narrow hem. Reinforce the front V by stitching between the dots. Clip to the stitching at the center front. Gather the upper edge of the skirt. Pull gather to fit bodice. With right sides together pin the bodice to the skirt. Stitch in place. Sew center seam of sash sections together. Fold sash in half, stitch along edges, leaving an opening for turning. Turn sash right side out and press. Sew back seam from the hem to the dot. Press. Gown should close with the left opening over right. Sew snaps in place to secure. Knee Length Dress with Long Sleeves Make darts in the bodice front. Press dart open. Make darts in the back bodice sections. Sew back sections to the bodice front at the side seams. Prepare the bodice lining the same as above. With right sides together, sew bodice lining to the bodice at the upper edge and left back opening. Clip seam, turn and press. Finish raw edges of the right back opening with a zigzag stitch or serger. Baste lining and bodice together close to the lower edge. Finish the lower edge of each sleeve with a narrow hem. Gather the lower edge of the upper sleeve. With right sides together, pin lower sleeve edge to the upper sleeve. Stitch in place. Make casing on the upper edge of the sleeve by turning the raw edge under 3/8. Press, then stitch casing in place. Run elastic through the casing. Pull to fit from the dolls arm pit over her shoulder. Tack in place at each end. Reinforce the front V of the skirt by basting between the dots. Gather the upper edge of the skirt. Pull up bobbin threads and adjust the gathers to fit the bodice. With right sides together, pin the bodice to the skirt and sew in place.
Sew back seam from the hem to the dot. Press. Gown should close with the left opening over right. Sew snaps in place to secure. Short Sleeve Variation Fold the sleeve band in half. Gather the lower edge of the upper sleeve. Pin the sleeve band to the upper sleeve with right sides together. Stitch in place. Create a casing on the upper portion of the sleeve. Sew in place Run elastic through the casing. Tack ends in place, fitting the opening to the dolls arm and allowing enough stretch to rest on her shoulder. Hand sew the casing openings closed. Both sleeve types can be hand sewn to the dress or left unattached. www.fletcherpatterncompany.com Copywrite 2011 DesignsbyJude
Piece Short Dress Skirt Cut 1on fold Designs by Jude
Piece Long Dress Back Designs by Jude
Piece Long Dress Front Cut 1 on fold esigns by Jude
Piece Sash Piece Sleeve Designs by Jude
Piece Dress Front Cut 1Fabric on fold Cut 1 Lining on fold Piece Dress Back Fabric Lining Fold Line Stitch Line Grain Line Notch Dot Snap Seam allowance of 1/4 is already included in the dimensions of the pattern Piece Short Sleeve Band Piece Long Sleeve Designs by Jude