PokéBot GO! Rules 1. Participants will have 5 minutes to gain experience points. All team members may have hands on time in controlling the bots.

Similar documents
VEX IQ Challenge - Highrise. Field Appendix. Page 1. Copyright VEX Robotics Inc. v

Hoop House Plans By Steve Robinson

This document will provide detailed specifications, BOM information, and assembly instructions for the Official Competition Field.

Hoop House Construction Plans

SETUP GUIDE FOR THE HANGING MINIBAY and SUPERBAY Golf Simulator Screen Systems.

PVC Fencing Install Instructions

DYI shelter enrichment items

COLLECT AND SORT FRUIT

ROBOTICS DESIGN CHALLENGE. Colorado TSA State Conference BUILDING COLLAPSE

ROBOTICS DESIGN CHALLENGE. Colorado TSA State Conference (with special thanks to Pennsylvania TSA) Building Collapse

The Queen Quilter Professional Quilters Kit Frame

Ledgewood Farm greenhouse. construction

DIY Field Guide ANDYMARK, INC.

Storage Master. Shed Row. Poly Buildings

Water Rocket Launcher

Inclined Plane, Wedge, Screw PRE-TEST. DIRECTIONS: Answer the following questions in the space provided.

This document will provide detailed specifications, BOM information, and assembly instructions for the Official Competition Field.

Manual for Shelter W3,5xL8,0xH3,8m

World Robot Olympiad 2018

Mighty Mo GX Series Cabinet Installation Guide. OR Rev /11

Low/High Tunnel Greenhouse Plans

Station 0 -Class Example

10 PVC Tree Instructions

Grade 8 Enriched Math Catapult Project 2012 Step by Step Instructions to building a catapult

WARNING: Prior to installation, turn the power off to the vending machine and unplug it from its power source. Also, make sure to level the machine.

FLATFROG MULTITOUCH 3200

Structural. Fittings New Product Catalog

Lockformer / 16 Gauge Speednotch

MARQUEE INSTALLATION HANDBOOK. Curved Structures

SMARTfit Functional and Brain Fitness Training Multi-Station Trainer Installation for Stud and Concrete Walls (US)

Simple Machines. Contact the National Museum of the U.S. Navy for Field Trip and School Visit opportunities!

Germ City Storage Box Inventory

15 Ft. x 39 Ft. Hoop House Construction

The Phoenix. Professional Quilting Frame. Copyright January 1, 2016 Jim M. Bagley, GraceWood, Inc (Reproduction Prohibited) Version 2.

HandPunch Installation Guide

Kiosk Solution W1000. Installation and Assembly Instructions July 2015 Edition

Table of Contents Product Specifications. 08 Coffee Table Project. 09 Indusrial Railing Project. 10 Grill Side Table Project

Deck Mount Installation with Bench

Assembly Instructions

SMARTfit High Intensity Cognitive Training. SMARTfit Trainer Installation Manual for Stud and Concrete Walls Revision 1.3

User Guide. 7ft x 10ft JumpPOD Oval

Hardware and Components:

Cable Cover Guide. Color List... W White B Black P Premium Wood (stainable Floor Trim only) shape & size (wxh) colors available

Field Specs & Assembly Instructions

The Lady in RED *(shoes)

Depending on the size you ordered you will have either 5 Foot sections which will build the 10 Foot frame or 6 Foot sections which will build the 12

Congratulations! Your dog is going to love you!

CARPORT/SHELTER MODEL: JIT L12.0xW6.2xH4.0M Installation Manual

Instructions for the installation of Handy Well Pump Models HWP-E, HWP and HWP-L. **Read thoroughly before you start!**

CONTENTS TOOL LIST U P S I D E I N N O V A T I O N S, L L C RAMP AND STEP SYSTEM ASSEMBLY INSTRUCTIONS. Revised: June 2013

PRIVACY FENCE WITH SCALLOPED PICKET INSTALL INSTRUCTIONS

EVIDENCE VAULT. Cut an opening in the top and front cover with plastic or wax paper to allow light through. Top of table Table Front.

Positive Promotion: Use the FIRST and FTC logos in a manner that is positive and promotes FIRST.

S48-L12-SC AND G48-L12-GC STEEL PORTA-DOCK S82 SC 6 X 12 PLATFORM AND G82 GC 6 X 12 PLATFORM

Yes 20 Charging Wall Cabinet for Tablets

INSTALLATION INSTRUCTIONS FOR HAND OPERATED MODELS: 170, 171-R, 171-N, 172, 260

DIY Lowery Inspired Embroidery Floor Stand

6MM ALLEN KEY FOR ROOF CLIPS PHILLIPS HEAD BIT FOR SCREWS FOR DOOR FRAME SPIRIT/LASER LEVEL TO LEVEL THE UNIT

PATRIOT DOCKS ASSEMBLY INSTRUCTIONS

Riser Extension INSTALLATION GUIDE 40100AX35 / 40100AX18. Manual 40100X35-8

Autonomous Aerial Robot Tournament KISS Institute for Practical Robotics

SETUP INSTRUCTIONS If you would like to tell us about your experience with your setup instructions please us at

How to Build a Fold- Down Greenhouse

PORTA-DOCK, INC. AP17 APD DS 4 X 16 T12 AW17 CPD DS 4 X 16 T12

Hardware and Components:

COMPONENTS INSTALLATION

PRIVACY FENCE WITH LATTICE INSTALLATION INSTRUCTIONS

Contest Field Border Construction Manual

INSTALLATION OF THE TRACK FOR THE STRAIGHT SIDE STEEL LADDER

NON-ELECTRIC DOG FENCES

CHAPTER 1. Easy Patterns For Kids to Crochet

Teams who do not need an official field should refer to the separate low-cost field guide for costreduction

Tools and Tips: ( 1 )

flex Installation multiflex

Robofest SM 2005 Competition Challenge: RoboRelay Jan. 6, 2005 v5.2 (Official Version) Junior Competition Division ...

Installation Fence Guide Kodiak Iron. Exceptional Fencing Extraodinary Customer Service

Trunking Guide. Colour List... W White M Magnolia B Black. shape & size (wxh) colours available

One Piece LSD/Vector Pads from TIE DOWN ENGINEERING Easier installation with 70% fewer parts Lower cost with competitive pricing

TOOLS REQUIRED: HARDWARE INCLUDED: 13MM FLAT WRENCH FOR LEVELING THE STRUCTURE RATCHET WITH 5MM HEX BIT FOR CORNER SCREWS ON TOP TRAVERSE BEAMS

8 th Annual Robotics Competition. High School and Middle School Teams. April 5th, Event Rules Booklet. Sponsored by

Angled Side Flush with Panel Face

General Guidelines:

15'x10'x6' Enclosure - Dog Run Assembly Instruction

Electric Skein Winder

Kindergarten Making Motion to Describe Forces Alyssa Dehn

Q-Zone Hoop-Frame. Assembly Instructions. Copyright July 11, 2018 Grace Company (Reproduction Prohibited) Version 1.8

Continuum Frame Assembly Instructions

System 3000 specifications

Purlin Installation. Step 1: Start at one end and work your way down the tunnel. Step 2: Lay out a measuring tape between the ground posts

RANGER Class Preview Product Demonstration Inner Space: Rigs to Reefs

PRINTER REPAIR ARTICLE HP LJ 4345/M4345 Swing Plate Replacement

Insolroll Clutch Operated Shades Installation Instructions Installation Instructions

D.I.Y. Dog and Cat Manual

INSTALLATION MANUAL. Decoration panel BYCQ140E2W1 BYCQ140E2W1W BYCQ140E2W1B

SUPPLEMENT 2 TO SECTIONS 14 & 15

fun and adaptable pie shooting catapult!

PO BOX 130 CLEAR LAKE, MN

Epson WorkForce DS-510 Color Document Scanner - clicking sound, mulitple page feed broken

Side "A" Stake here. Side "C" Side "D" Side "B" Here Shirley and I are setting up a 10 X 16 ground work.

Coro Character PVC Frame Instructions:

Transcription:

PokéBot GO! DESCRIPTION: Team Driving involving a team of two or more members. The team will consist of two robots on the mat at the same time. The robots may work together or separately on the tasks. Size of the field will be approximately 20 X 15. All Robots will need to fit inside a box 18 X 18 X 18 at the time the game begins. Rules 1. Participants will have 5 minutes to gain experience points. All team members may have hands on time in controlling the bots. 2. All team members may walk around most of the playing surface during the event. Off limit areas will be marked. The Incubator will not be directly visible so drivers will need to view the video monitor when navigating there. No additional video feeds will be allowed. 3. PokéBots must navigate to various location and complete designated tasks. 4. Each completed task receives experience points as specified below. YOUR MISSION: Gain experience as a Pokémon trainer by 1) activating Pokéstops, 2) capturing Pokémon, 3) delivering Pokémon eggs to the Incubator, and 4) delivering captured Pokémon into the Gym for battle. Field Setup: The field will be approximately 15 feet by 20 feet and bound by PVC pipe. Five Pokéstops and three Pokémon will be located at various positions, along with an Incubator and Gym in two corners of the field. 1) Spinning a Pokéstop will release three items which are either Pokéballs or Pokémon Eggs. To spin the Pokéstop a PokéBot must push a PVC bar 180 degrees around a stand. The PVC bars will be at different heights ranging from 5 to 15 off of the ground, and turn in different directions. 2) Three Pokémon will be located within circles of various sizes on the field. To capture a Pokémon and gain experience, a Pokéball must be flung by the PokéBot and hit the Pokémon. The PokéBot must remain outside the circle surrounding the Pokémon. Flinging includes any manner of sending the Pokéball such as pushing, batting, or throwing. 3) Eggs which get dispensed from Pokéstops need to be delivered to the Incubator. The Incubator is elevated and must be entered by driving up a ramp. The inside of the Incubator is not directly visible. An overhead camera will provide a video feed to a TV monitor for observation. The Egg must be dropped into a hole in the Incubator to gain experience points. 4) Captured Pokémon may be guided by a PokéBot to the Gym for additional experience points. The entry to the gym is blocked and will require one PokéBot to pull a rope to hold it open while the other PokéBot delivers the Pokémon.

Scoring: Activating Pokéstop: Hatching Egg: = 50 Experience Points = 150 Experience Points Capturing Pokémon: Wobuffet = 100 Experience Points Eevee = 125 Experience Points Pikachu = 150 Experience Points Delivering Pokémon : Wobuffet = 100 Experience Points to Gym Eevee = 125 Experience Points Pikachu = 150 Experience Points Maximum possible points: 1450 Notes: The diagram below shows approximate locations. Actual layout may differ on game day. Pokéballs and eggs that leave the field of play will not be returned during the match. Pokéballs that hit Pokémon accidently (not intentionally tossed) will not count as a capture. If a PokéBot enters the circle around a Pokémon during a toss, a capture will not count from a Pokéball hit. PokéBots that become hung up and stuck can be retrieved by a judge at the request of the driver and returned to the start area. This results in a loss of 50 Experience Points. The height of the bar on Pokéstops will range from 5 to 15 off of the ground and may need to be turned either direction. The Carabiner that is pulled to open the door on the Gym is approximately 2 high, and the center point of the hole will be approximately 10 off of the ground.

PokéBot Go! Scoring Sheet Team: Pokéstop Activation Pokéstop activated (all balls released) Total points (max 250) Pokéstops 1 2 3 4 5 x 50 = Pokémon Capture Captured Total Wobuffet 100 Eevee 125 Pikachu 150 Total points for Pokémon capture (max 375) Pokémon Delivered to Gym Wobuffet 100 Eevee 125 Eggs Delivered to Incubator Pikachu 150 Eggs Delivered 1 2 3 x 150 = Total points for Pokémon Delivery to Gym (max 375) Total points Eggs (max 450) Final Score: (1450)

PokéBot GO! Build Guide Field boundary 10 x LASCO 3/4-in Dia PVC Sch 40 Tee @ $0.50 each 4 x LASCO 3/4-in Dia 90-Degree PVC Sch 40 Side Outlet Elbow @ $1.60 each 7 x Charlotte Pipe 3/4-in x 10-ft 480-PSI Schedule 40 PVC Pipe @ $2.01 each The field boundary consists of ¾ PVC pipe cut into 14, 5 foot sections. Corner connections are made with 90- Degree PVC Sch 40 Side Outlet Elbows, and straight joins are made with 3/4-in Dia PVC Sch 40 Tee. The Tees and Elbow are pointed down to raise the PVC boundary up off the ground. Prices and part names from Lowes as of 11/4/2016. PokéStop 1 x Walnut Hollow 41160 Basswood Circle Panel Clock @ $12.03 on Amazon http://amzn.to/2evdeor 1 x Mueller Proline 3/4-in Dia Galvanized Floor Flange Fittings@ $7.87 1 x Mueller Proline 1/2-in Dia Galvanized Floor Flange Fittings @ $6.84 1 x LASCO 1/2-in Dia PVC Sch 40 Adapter @ $0.38 1 x LASCO 1-in Dia x 3/4-in Dia PVC Sch 40 Adapter @ $1.00 2 x LASCO 3/4-in Dia PVC Sch 40 Tee @ $0.50 each 1 x Charlotte Pipe 1/2-in x 10-ft 315-PSI SDR 13.5 PVC Pipe @ $1.56 (only need 2 section) 1 x Charlotte Pipe 3/4-in x 10-ft 480-PSI Schedule 40 PVC Pipe @ $2.01 (cut into one 27 section, one 18.5 section and one 9 section) 1 x LASCO 3/4-in Dia PVC Sch 40 Cap @ $0.96 1 x 1-in x 10-ft 450-PSI Schedule 40 PVC Pipe @ $2.56 (only need 19 section) 1 x Charlotte Pipe 2-in x 2-ft 280-PSI Schedule 40 PVC Pipe @ $4.65 1 x 3D print of Pokéstop found at http://www.thingiverse.com/thing:1794872. Print as large as possible Cable ties 1 x The Hillman Group 3-in Cotterless Hitch Pin @ $2.82 String Mount the flanges to the Basswood circle with screws. Screw in the PVC adaptor pieces to the flanges and then connect PVC pieces as shown in the picture. The 18.5 section of 3/4inch PVC needs to be cut into two pieces. The relative size of each piece will affect how high the turning bar is off the ground. Minimum size off the lower piece is 2, maximum is 12. Alternative minimal Pokéstop for practice 1 x Walnut Hollow 41160 Basswood Circle Panel Clock @ $12.03 on Amazon http://amzn.to/2evdeor 1 x Mueller Proline 3/4-in Dia Galvanized Floor Flange Fittings@ $7.87 1 x LASCO 1/2-in Dia PVC Sch 40 Adapter @ $0.38 1 x LASCO 3/4-in Dia PVC Sch 40 Tee @ $0.50 each 1 x Charlotte Pipe 3/4-in x 10-ft 480-PSI Schedule 40 PVC Pipe @ $2.01 (one 18.5 section and one 9 section) With this minimal set up all you are building is the section that turns, mounted to a base. Functionally this allows a practice device for a Pokébot to practice spinning.

Full Pokéstop. Pokébot many only touch white pipe to spin it 180. The rope winds around the Tee connector and pulling out the pin to release the balls. Minimal Pokéstop. Just the base section of the spinning part of the Pokéstop which is sufficient for practice.

Egg Hatchery 4 x Charlotte Pipe 3/4-in x 10-ft 480-PSI Schedule 40 PVC Pipe @ $2.01 each (cut into eight 4 sections and two 2 sections) 8 x LASCO 3/4-in Dia 90-Degree PVC Sch 40 Side Outlet Elbow @ $1.60 each 2 x 4 surface for base. Could be Plexiglas or wood and should be raised a couple of inches. Rolls of duct tape can be used to raise it 1 x 2 surface for ramp into hatchery. Connect the PVC and connectors to build a 4 x2 x4 cube. Lay the elevated based inside the cube and attach ramp with tape. Egg Hatchery. During the event the walls will be covered with black fabric so that the inside is not directly visible. A camera will be mounted above and viewable on a TV monitor for navigation. The hole that eggs must be dropped in to will be in lower right corner of this image. Approximate location of hole PokéBalls and PokéEggs The PokéBalls are Callaway brand foam golf balls purchased at Target. PokéEggs are 2 ½ Smoothfoam eggs purchased at Hobby Lobby.

PokéGym 3 x Charlotte Pipe 3/4-in x 10-ft 480-PSI Schedule 40 PVC Pipe @ $2.01 each (cut into ten 2 sections) 8 x LASCO 3/4-in Dia 90-Degree PVC Sch 40 Side Outlet Elbow @ $1.60 each 1 x LASCO 3/4-in Dia PVC Sch 40 Tee @ $0.50 each 1 x LASCO 3/4-in Dia 90-Degree PVC Sch 40 Cross Tee @ $2.48 4 pulleys Paracord rope 1 x carabineer Connect pieces as shown in picture. Pokémon 8 tall Pokémon on Waxman 1-1/4-in Plastic Swivel Caster ($8.97 at Lowes)