CUTTING & BEVELING MACHINES TOOLS FOR HIGH PURITY PROCESS PIPING

CUTTING & BEVELING MACHINES TOOLS FOR HIGH PURITY PROCESS PIPING

Contents About Orbitalum 1 Pipe Cutting and Beveling Machines GF 3 Pipe Cutting and Beveling Machines RA 6 Pipe Cutting and Beveling Machines GFX 3.0 9 Set of stainless steel caps 11 Quick-mounting base plates 11 Durable storage and shipping case 11 Accessories for GF and RA machines 12 Aluminum clamping shells 13 Special stainless steel clamping jaws 14 Set of stainless steel clamping attachments 14 Continuous cooling system 14 Saw blade lubricant GF TOP 14 Saw blade lubricant GF LUB 14 Special gear oil 14 Intermediate gearbox retrofit kit 15 Swivel cable 15 Quick-mounting base plate without screw clamps 15 Quick-mounting base plates with integrated screw clamps 15 Pipe feeder base unit and extension unit 16 Mobile Workstation 17 Saw blades and bevel cutters for GF and RA machines 18 Saw blades 19 Saw blade/bevel cutter combinations 20 Weld-prep saw blade/bevel cutter combinations 20 Replacement parts for weld-prep saw blade/bevel cutter combinations 20 Support disc for saw blade/bevel cutter combinations 20 Press fitting saw blade/bevel cutter combinations 20 Replacement parts for press fitting saw blade/bevel cutter combinations 29 Bevel cutters 21 Saw blade lubricant GF TOP 21 Saw blade lubricant GF LUB 21 Portable Tube Saws PS 4.5, PS 6.6 22 Quick-mounting plate with screw clamps 24 Saw blades 24 Tripod 24 Clamping jaws replacement set 24 Laser retrofitting kit 24 Metal Tube Cutter MRA 25 Multi-roller cutting chains 27 Clamping shells 27 Tube Squaring Machines RPG XS, RPG ONE, RPG 1.5, RPG 2.5 28 Angle drive RPG ONE (cordless) and RPG 1.5 (cordless) 30 One-piece stainless steel clamping shells 31 Tool holder WH 33 Multifunctional tool MFW 33 Tube Squaring Machines RPG 4.5, RPG 4.5 S, RPG 8.6 34 Clamping shells 36 Tool holder WH 37 Multifunctional tool MFW 37 Boiler Pipe Preparation Machine BRB 2 Full Auto 38 Boiler Pipe Preparation Machines BRB 2, BRB 4 41 Pipe End Preparation Machines REB 6, REB 14 44 Accessories for BRB and REB machines 46 Tool holder WH 46 Multifunctional tool MFW "Economy" 47 Multifunctional tool MFW "High-Performance" 47 Tool Bits TB 47 Tool holder for Tool Bits TB 48 Tool holder for tool combinations WH/MFW 48 Balancer spring 48 Hoist bracket 48 Tungsten Grinder ESG Plus 52 Accessories for Workshop & Site 54 Rental and Training 56

About Orbitalum Orbitalum Cutting + Welding Founded in 1960 as a subsidiary of Georg Fischer (+GF+) and renamed Orbitalum in 2006, Orbitalum is the world s premier manufacturer of superior quality, long lasting tube cutting and pipe preparation machine tools and orbital welding systems. The Orbitalum cutting & beveling products shown in this catalog are the perfect complement to Orbitalum s orbital welding systems, as a precision weld prep is a integral to a successful orbital welding program. Orbitalum offers a full range of products from pipe and tube cutters, tube facing and squaring tools, pipe end prep machines and sophisticated orbital welding equipment, all engineered and built in Germany to rigorous standards under ISO 9001:2008. They exhibit the excellence that German products are renowned for, including high quality materials, high precision, robust designs, powerful drives, and ease of operation. They have wide applications in many industries: HIGH PURITY APPLICATIONS Semiconductor Food, Dairy, Beverage Biopharmaceutical Chemical & Petrochemical Aviation, Aerospace INDUSTRIAL APPLICATIONS Power Generation Boiler & Heat Exchanger Fabrication Shop Oil, Gas, Petrochemical Water & Gas Distribution ITW Orbital Cutting & Welding Orbitalum Tools and E.H. Wachs are organized together as ITW Orbital Cutting & Welding, to provide our global customers one source for the finest in pipe & tube cutting, beveling and orbital welding products. When you partner with us you re not only partnering with the industry leader in portable weld preparation machine tools and orbital welding systems, you re partnering with ITW, the industry leader in advanced welding technologies. Orbitalum cutting and welding equipment is sold, serviced and rented in North and South America by E.H. Wachs, headquartered in Lincolnshire, Illinois near Chicago. With a large selection of Orbitalum machines and accessories in stock and ready for immediate shipment, Wachs backs you up with the expert advice and support our customers have relied on for over 130 years. Together we combine to make Orbitalum the industry s best built and supported cutting and facing machines. Visit the Sales, Service and Rental Center nearest you, contact your local Wachs or Orbitalum representative or learn more online at ehwachs.com. Genuine Parts + Factory Service E.H. Wachs offers genuine Orbitalum replacement parts and full repair services with factory trained and certified service technicians. Our large inventory of OEM parts and consumables are designed to help keep your Orbitalum product operating at peak efficiency. It s all part of our commitment to supplying our customers with affordably priced parts and service so you can continue to enjoy Orbitalum s unrivaled productivity for years to come. E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 1

Complete Solutions. One Source. Technology + Orbitalum Orbitalum has remained the industry leader in high quality tube cutting and facing equipment for over 50 years. Since our beginnings as a division of Georg Fischer we ve strived to engineer machines that are as good as we can GFX 3.0 possibly make them, with robust construction, ergonomic designs and intuitive controls. Orbitalum Cutting tools are the perfect complement to Orbitalum s complete line of orbital welding systems, and others as well, as the perfect preps they produce help produce a perfect weld. Orbital Saws + Blades Orbitalum manufactures the world s best selling tube and pipe saws, including the GF 4 and GF 6 that utilizes an orbital cutting motion around a stationary workpiece. Now with anthracite colored coating for added anti-corrosion properties, these saws produce a precision cut that is so square it s often considered weld ready. The innovative GFX series of saws incorporate everything we ve learned about portable cutting machines in a compact, lightweight design. Our robust RA 8 and RA 12 saws are designed and built to handle larger outside diameters, while the PS portable saws are optimized designs for portability. To keep your saws cutting at peak efficiency, always specify OEM factory replacement blades by Orbitalum. Tube Facing + Squaring Orbitalum offers a wide range of top selling RPG series tube squaring machines where the model number indicates the maximum OD in inches. These include the RPG One, RPG 1.5, RPG 2.5 and the larger RPG 4.5, RPG 4.5s, and RPG 8.6. All Orbitalum RPG machines are designed to produce perfectly square, burr free preps that are required for critical, defect free orbital welding applications. All Orbitalum squaring machines are electrically powered, with convenient cordless drive offered on select models. Boiler Tube + End Prep For demanding, high production boiler tube work Orbitalum manufactures a complete line of BRB boiler tube bevelers including the revolutionary BRB 2 Full Auto that automates tiring, repetitive motions. The BRB bevelers are offered in a choice of electric, pneumatic or pneumatic/auto clamping drives that, depending on configuration, will clamp a pipe ID of.5 to 4.4 (12.75-112mm). The powerful electric and pneumatic driven REB 6 and REB 14 end preparation machines feature an integrated stand and the QTC Quick Tool Change System, and are highly productive in continuous, high volume production settings such as fabrication shops applications. Orbital Welding Of all the major manufacturers, only Orbitalum designs and builds a complete line of cutting and weld prep machine tools plus a complete line of orbital welding systems. It makes us uniquely qualified to understand the entire welding process, and the needs of our users worldwide so we can deliver Complete Solutions. One Source. 2 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Pipe Cutting & Beveling Machines GF The GF series sets new standards in orbital tube and pipe machining E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 3

Pipe Cutting & Beveling Machines GF GF Pipe Cutting and Beveling Machines Square, burr-free and cold machining process Deformation-free clamping system for tubes and pipes Optimum preparation for the automated welding process Sturdy design with powerful drive Unique and automated orbital cutting process Simultaneous or separate cutting and beveling Cost-effective, increasing productivity Even longer tool life GF 4, GF 6 (AVM/MVM) GF 4 The new GF series sets new standards in orbital pipe machining. Numerous innovative functions combined with an ergonomic design create significant advantages for you in the industrial prefabrication of pipeline systems. Cutting and beveling high-alloy steel (stainless steel), low- and unalloyed steel, plastics, casting materials and non-ferrous metals in just seconds, using the "Planetary Cutting" method. GF 4 AVM Anthracite-colored coated components for improved sliding properties and protection against corrosion Stainless steel clamping attachments (Code 790 142 241) for protection against contact corrosion included Reduced operator impact by optional feed module AVM or MVM for an automated or manual cutting process Locking mechanism prevents unauthorized usage and theft A new ergonomically-designed motor handle for a safe and comfortable operating position, which also enables easy cutting of elbows Integrated line laser to determine the cut off point 2 position clamping jaws to reduce chatter and enable smaller length of pipe to be machined 1 multifunctional tool for all adjustments on the machine Extended speed range (40-215 rpm), ideal for the cutting of high-performance materials (Hastelloy, P91, etc.) Swivel cable with a quick-disconnect coupler for easy and quick replacement of power cables The new chip guard protects against flying chips and comes with a measuring port (for GF 4 only) Feed versions: GF AVM* Pipe Cutting and Beveling Machine with automatic feed module AVM. This intelligent solution continuously controls the cutting speed depending on the torque and the parameter settings. The AVM improves the handling of the GF and RA machine and stops automatically after the cutting process. The restart inhibit does not allow an unintended start-up. GF MVM* Pipe Cutting and Beveling Machines with manual feed module MVM. This manually operated feed module facilitates the cutting and beveling of pipes. With the help of a hand wheel, the machine head rotates easily and with little effort around the pipe with a constant speed. GF 4 MVM 4 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Pipe Cutting & Beveling Machines GF Machine comes with: 1 Pipe Cutting and Beveling Machine GF 4 or GF 6 (AVM/MVM)* 1 Transportation case 1 Saw blade (GF 4: Code 790 042 064, GF 6: Code 790 043 018) 1 Set of stainless steel clamping attachments 1 Mounting plate 1 Tool set 1 Tube of saw blade lubricant GF TOP (Code 790 060 228) 1 Bottle of special gear oil (Code 790 041 030) 1 Set of operating instructions and spare parts list * The automatic/manual feed module AVM/MVM is already fitted to the pipe cutter upon delivery All saws are fitted with the quick disconnect swivel cable. GF 6 Application range GF 4 (AVM/MVM) GF 6 (AVM/MVM) Pipe OD Wall thickness (depends on material)* Pipe ID min. (saw blade Ø 63 mm/ø 2.480 inch) Pipe ID min. (saw blade Ø 68 mm/2.677 inch) Pipe ID min. (saw blade Ø 80 mm/3.150 inch) Pipe ID min. (saw blade Ø 100 mm/3.937 inch) Technical data Power Built-in electronic variable cutting speed with restart inhibitor 12-120 mm 0.472-4.724 inch 1-9 mm 0.039-0.354 inch 21 mm 0.827 inch 16 mm 0.630 inch 4 mm 0.157 inch 21.3-168.3 mm 0.839-6.626 inch 1.5-15 mm 0.059-0.591 inch 30 mm 1.181 inch 25 mm 0.984 inch 13 mm 0.512 inch 0 mm 0 inch Drive with single-phase AC motor 1.8 kw without AVM / 1.9 kw with AVM 40-215 rpm 40-215 rpm Protection class Double-insulated according to class II, DIN EN 60745-1 Double-insulated according to class I, DIN EN 60204-1 (GF AVM) Noise level at the workplace approx. 79 db (A) 79 db (A) Vibration level < 2.5 m/s 2 in accordance with DIN EN 28662, part 1 * Increased wall thickness possible with manual feed or by adding an additional cut (depending on the saw blade diameter). GF 6 AVM Article Version Code Weight of machine Shipping weight GF 4 230 V, 50/60 Hz EU 790 142 001 61.300 88.000 GF 4 120 V, 50/60 Hz EU/US 790 142 002 61.300 88.000 GF 4 AVM 230 V, 50/60 Hz EU 790 142 011 70.500 98.000 GF 4 AVM 120 V, 50/60 Hz EU/US 790 142 012 70.500 98.000 GF 4 MVM 230 V, 50/60 Hz EU 790 142 021 66.600 98.000 GF 4 MVM 120 V, 50/60 Hz EU/US 790 142 022 66.600 98.000 GF 6 230 V, 50/60 Hz EU 790 143 001 92.700 140.000 GF 6 120 V, 50/60 Hz EU/US 790 143 002 92.700 140.000 GF 6 AVM 230 V, 50/60 Hz EU 790 143 011 101.700 153.000 GF 6 AVM 120 V, 50/60 Hz EU/US 790 143 012 101.700 153.000 GF 6 MVM 230 V, 50/60 Hz EU 790 143 021 97.800 147.000 GF 6 MVM 120 V, 50/60 Hz EU/US 790 143 022 97.800 147.000 GF 6 MVM E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 5

Pipe Cutting & Beveling Machines RA Perform economical cutting and beveling with technology by Orbitalum 6 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Pipe Cutting & Beveling Machines RA RA Pipe Cutting and Beveling Machines Square, burr-free and cold machining process Deformation-free clamping system for tubes and pipes Optimum preparation for the automated welding process Sturdy design with powerful drive Unique and automated orbital cutting process RA 8 and RA 12 Cutting and beveling high-alloy steel (stainless steel), low- and unalloyed steel, plastics, casting materials and non-ferrous metals in just seconds, using the "Planetary Cutting" method. Reduced operator impact by optional feed module AVM or MVM for an automated or manual cutting process Multiple point clamping Fast adjustment of dimensions Regulated cutting speed Optimal tool contact Working direction from the inside towards the outside Fast tool replacement Optimal speed range of 40-215 rpm, ideal for the cutting of high-performance materials (Hastelloy, P91, etc.) An ergonomically-designed motor handle for a safe and comfortable operating position Square, burr-free and deformation-free pipe end Cold machining process Cutting in seconds Simultaneous or separate cutting and beveling Increased productivity Improved cutting quality Increased service life of tools RA 8, RA 8 AVM, RA 8 MVM Pipe Cutting and Beveling Machines with special aluminum attachments. Supplied as standard with RA 8 and RA 12. The above-mentioned RA machines are also available in the following feed versions: RA 8 AVM and RA 12 AVM Pipe Cutting and Beveling Machines with integrated crown wheel and automatic feed module AVMAVM. This intelligent solution continuously controls the cutting speed depending on the torque and the parameter settings. The AVM improves the handling of the GF and RA machine and stops automatically after the cutting process. The restart inhibit does not allow an unintended start-up. RA 12, RA 12 AVM, RA 12 MVM RA 8 MVM and RA 12 MVM Pipe Cutting and Beveling Machines with manual feed module MVM. This manually operated feed module facilitates the cutting and beveling of pipes. With the help of a hand wheel, the machine head rotates easily and with little effort around the pipe with a constant speed. E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 7

Pipe Cutting & Beveling Machines RA Machine comes with: 1 Pipe Cutting and Beveling Machine RA (AVM/MVM)* 1 Transportation case 1 Saw blade (RA 8: Code 790 043 018, RA 12: Code 790 043 018) 1 Mounting plate 1 Tool set 1 Tube of saw blade lubricant GF TOP (Code 790 060 228) 1 Bottle of special gear oil (Code 790 041 030) 1 Set of operating instructions and spare parts list All RA s are fitted with the swivel cable with a quick-disconnect coupler. Application range RA 8 (AVM/MVM) RA 12 (AVM/MVM) Pipe OD [mm] 114-230 154-325 [inch] 4.488-9.055 6.063-12.795 Wall thickness depends on material** Pipe ID min. (saw blade-ø 63 mm/2.480 inch) Pipe ID min. (saw blade-ø 68 mm/2.677 inch) Pipe ID min. (saw blade-ø 80 mm/3.150 inch) Pipe ID min. (saw blade-ø 100 mm/3.937 inch) Technical data [mm] 2-10 2-10 [inch] 0.079-0.394 0.079-0.394 [mm] 137 190 [inch] 5.394 7.480 [mm] 132 185 [inch] 5.197 7.283 [mm] 120 173 [inch] 4.724 6.811 [mm] 100 153 [inch] 3.937 6.024 Drive with single-phase AC motor Dimensions (lxwxh) RA [mm] 778 x 485 x 430 940 x 592 x 374 [inch] 30.6 x 19.1 x 16.9 37.0 x 23.3 x 14.7 Dimensions (lxwxh) RA AVM [mm] 918 x 485 x 430 1.070 x 592 x 374 [inch] 36.1 x 19.1 x 16.9 42.1 x 23.3 x 14.7 Dimensions (lxwxh) RA MVM [mm] 788 x 485 x 430 1.090 x 592 x 374 [inch] 31.0 x 19.1 x 16.9 42.9 x 23.3 x 14.7 Power RA / RA AVM / RA MVM [kw] 1.8 / 1.9 / 1.8 1.8 / 1.9 / 1.8 Power AVM [kw] 0.10 0.10 Protection class [class] Double-insulated according to class II, DIN EN 60745-1 (RA AVM: according to class I, EN 60204-1) Built-in electronic speed regulation with [rpm] 40-215 40-215 speed stabilization Vibration level in accordance with 28662, part 1 [m/s²] < 2.5 < 2.5 Noise level at the workplace approx. [db (A)] 79 79 Article Version Code Weight of machine Shipping weight RA 8 230 V, 50/60 Hz EU 790 045 095 102.000 149.000 RA 8 120 V, 50/60 Hz EU/US 790 045 096 102.000 149.000 RA 8 AVM 230 V, 50/60 Hz EU 790 045 001 114.000 165.000 RA 8 AVM 120 V, 50/60 Hz EU/US 790 045 007 114.000 165.000 RA 8 MVM 230 V, 50/60 Hz EU 790 045 069 103.000 153.000 RA 8 MVM 120 V, 50/60 Hz EU/US 790 045 082 103.000 153.000 RA 12 230 V, 50/60 Hz EU 790 047 095 135.000 177.000 RA 12 120 V, 50/60 Hz EU/US 790 047 096 135.000 177.000 RA 12 AVM 230 V, 50/60 Hz EU 790 047 001 146.000 205.000 RA 12 AVM 120 V, 50/60 Hz EU/US 790 047 007 146.000 205.000 RA 12 MVM 230 V, 50/60 Hz EU 790 047 069 139.000 200.000 RA 12 MVM 120 V, 50/60 Hz EU/US 790 047 082 139.000 200.000 * The automatic/manual feed module AVM/MVM is already fitted to the pipe cutter upon delivery ** Increased wall thickness possible with manual feed or by adding an additional cut (depending on the saw blade diameter). When processing thin-walled tubes, special clamping shells may be needed. 8 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Pipe Cutting & Beveling Machines GFX 3.0 The perfect preparation for orbital welding E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 9

Pipe Cutting & Beveling Machines GFX 3.0 GFX Pipe Cutting and Beveling Machines Square, burr-free and cold machining process Deformation-free clamping system especially applicable for thin-walled tubes Easy handling through light weight Increased productivity Low-maintenance and service friendly Environmentally friendly and long product life Second saw blade position to cut off elbows GFX 3.0 New, innovative saw from Orbitalum Tools for cutting and beveling of tubes and elbows in just seconds. The perfect preparation for orbital welding. Easy to use, powerful and compact saw with low weight our new GFX 3.0 provides even more outstanding features: GFX 3.0 Cast iron clamping jaws Integrated line laser to mark the cut off point Ergonomically designed motor handle Powerful drive with 1.2 kw and adjustable speed control Electronic overload protection with integrated temperature monitor and electronic speed regulation Ergonomically positioned speed control adjusting wheel Swivel cable with a quick-disconnect coupler for easy and quick replacement of power cables Directly mountable to the work bench Machine comes with: 1 Pipe Cutting and Beveling Machine GFX 3.0 1 Transportation case 1 Saw blade (Code 790 041 035) 1 Tool set 1 Tube of saw blade lubricant GF TOP (Code 790 060 228) 1 Set of operating instructions and spare parts list GFX 3.0 Application range with tubes with bars Tube OD min.-max. (saw blade Ø 63 mm/2.480 inch) Tube OD min.-max. (saw blade Ø 68 mm/2.677 inch) Wall thickness min.-max. (saw blade Ø 63 mm/2.480 inch) Wall thickness min.-max. (saw blade Ø 68 mm/2.677 inch) Tube materials 6.0-78.0 mm 0.236-3.071 inch 6.0-73.0 mm 0.236-2.874 inch 0.8-5.5 mm 0.032-0.217 inch 0.8-7.0 mm 0.032-0.276 inch Technical data Dimensions (lxhxb) Protection class Power Built-in electronic speed regulation with speed stabilisation Vibration level in accordance with 50144 < 2.5 m/s² 6.0-16.0 mm 0.236-0.630 inch 6.0-21.0 mm 0.236-0.827 inch Unalloyed, low-alloy and high-alloy steel, stainless steel, non-ferrous metal, aluminum alloy, titanium alloy, composite material and plastic Electric drive with single-phase AC motor 570 x 280 x 330 mm / 22.441 x 11.024 x 12.993 inch Class II 1200 W 30-200 rpm Article Version Code Weight of machine Shipping weight GFX 3.0 230 V, 50/60 Hz EU 790 144 001 28.500 44.000 GFX 3.0 120 V, 50/60 Hz US 790 144 002 28.500 44.000 10 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Pipe Cutting & Beveling Machines GFX 3.0 Accessories for GFX 3.0 Set of stainless steel caps Ideal for preparing stainless steel tubes. Prevents contact corrosion between tube and clamping parts. Clamping shells for thin-walled tubes are available on request. Set comes with: 6 Stainless steel caps 12 Countersunk screws 1 Allen key Set of stainless steel caps Article Code Set of stainless steel caps for GFX 3.0 790 144 200 0.150 Quick-mounting base plates With and without integrated screw clamps for quick mounting of the machine on work benches. Durable storage and shipping case High-quality padded blue shipping case. Article Code Durable storage and shipping case for GFX 3.0 790 144 019 12.500 Durable storage and shipping case E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 11

Accessories for GF & RA Machines For more efficiency and easy handling in the workplace Our high-performance lubricants for cutting and beveling to increase the tool life of saw blades Clamping shells or jaws for deformation- or corrosion-free clamping of tubes Quick-mounting base plates ideal for frequent changes of location Pipe feeder for accurately feeding long and heavy pipes into GF and RA machines Our Mobile Workstation for the mobile site and/or workshop: Lockable tool box with 4 drawers Adjustable height lifting table Swarf collection tray Roller pipe support 12 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Accessories for GF & RA Machines Accessories for GF and RA machines Aluminum clamping shells For RA 6, RA 8 and RA 12. Customized aluminum clamping shells for deformation-free clamping of thin-walled tubes. When ordering, please indicate the outside diameter and/or inside diameter and the wall thickness of the tube to be worked on. Comes with: 4 Cylinder head screws 1 Set of clamping shells Aluminum clamping shells When ordering clamping shells for RA 8 you will also receive: 1 Drilling jig for the assembly of the clamping shells 2 Cylinder head screws for the drilling jig Other dimensions are available. Article Version Pipe OD [mm] Pipe OD [inch] Aluminum clamping shells for RA 6 76.1 3.000 790 043 216 4.500 Aluminum clamping shells for RA 6 122.5 4.823 790 043 220 3.800 Aluminum clamping shells for RA 6 125.0 4.921 790 043 219 Aluminum clamping shells for RA 6 148.5 5.846 790 043 221 3.300 Aluminum clamping shells for RA 6 154.0 6.063 790 043 218 3.130 Aluminum clamping shells for RA 6 177.5 6.988 790 043 222 2.600 Aluminum clamping shells for RA 8 129.0 5.079 790 045 216 4.300 Aluminum clamping shells for RA 8 139.1 5.476 790 045 219 4.700 Aluminum clamping shells for RA 8 167.0 6.575 790 045 218 4.000 Aluminum clamping shells for RA 8 168.3 6.626 790 045 220 3.600 Aluminum clamping shells for RA 8 210.0 8.268 790 045 217 2.900 Aluminum clamping shells for RA 12 204.0 8.030 790 047 222 Aluminum clamping shells for RA 12 209.0 8.230 790 047 221 11.500 Aluminum clamping shells for RA 12 219.0 8.620 790 047 220 11.200 Aluminum clamping shells for RA 12 254.0 10.000 790 047 216 9.200 Aluminum clamping shells for RA 12 273.0 10.750 790 047 219 8.400 Aluminum clamping shells for RA 12 300.0 11.810 790 047 224 9.100 Aluminum clamping shells for RA 12 324.0 12.760 790 047 218 6.100 Aluminum clamping shells for RA 12 306.0 12.047 790 047 225 5.800 Code Aluminum clamping shells for GF 4 and RA 41 Plus For deformation-free clamping of thin-walled tubes. Further clamping shells are available for various outer diameters. Article Tube OD [mm] Tube OD [inch] Aluminum clamping shells 25.40 1.000 790 046 316 3.025 Aluminum clamping shells 38.10 1.500 790 046 331 2.950 Aluminum clamping shells 50.80 2.000 790 046 345 2.850 Aluminum clamping shells 76.10 2.996 790 046 358 2.800 Aluminum clamping shells 88.90 3.500 790 046 363 2.500 Aluminum clamping shells 108.00 4.252 790 046 367 1.640 Aluminum clamping shells 114.30 4.500 790 046 368 1.640 Code Aluminum clamping shells for GF 4 and RA 41 Plus E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 13

Accessories for GF & RA Machines Special stainless steel clamping jaws for RA 21 S, GF 4, and RA 4 In pairs. Retrofit. While stock last. Special stainless steel clamping jaws Article Code Special stainless steel clamping jaws for RA 21 S 790 041 323 1.035 Special stainless steel clamping jaws for GF 4, RA 4 and RA 41 Plus 790 042 201 2.350 Set of stainless steel clamping attachments For GF 4 and GF 6 (AVM/MVM). For protection against contact erosion. Standard part of the GF 4 and the GF 6 (AVM/MVM). Set of stainless steel clamping attachments Article Version Code Set of stainless steel clamping attachments for GF 4 right + left 790 142 241 0.510 Set of stainless steel clamping attachments for GF 6 right + left 790 143 200 0.510 Continuous cooling system On request for GF 4, GF 6, RA 8 and RA 12 available. For details, see. Saw blade lubricant GF TOP GF TOP Synthetic high-performance lubricant for cutting and beveling machines. Increases the tool life of the saw blade. Compliant with the food approval NSF H2. The screwable brush guarantees an easy and uniform application of lubricant on the saw blade. Article Version Code Saw blade lubricant GF TOP Tube, 180 g 790 060 228 0.205 Saw blade lubricant GF LUB GF LUB The NEW chlorine-free high-performance lubricant for cutting and beveling. Increases the tool life of the saw blade. This ecologically cutting compound is the environmentally friendly replacement for ROCOL: just with a new name and improved quality. GF LUB meets the latest environmental directives and ecological standards. Article Version Code Saw blade lubricant GF LUB Tube, 160 ml 790 041 016 0.144 Special gear oil For all GF and RA machines. Special gear oil Article Version Code Special gear oil Bottle, 250 ml 790 041 030 0.235 14 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Accessories for GF & RA Machines Intermediate gearbox retrofit kit To convert a standard pipe cutting and beveling RA machine (RA) to RA H (with intermediate gear) with the former FE 680 Motor (150-270 rpm). The intermediate gearbox reduces the cutting speed of the RA machine to 40-70 rpm and increases torque. For cutting high-performance materials e.g. Hastelloy and Inconel. Fits all RA 4, RA 41, RA 41 Plus, RA 6, RA 8 and RA 12 machines. The kit includes all parts necessary for retrofitting as well as additional gear oil. Intermediate gearbox retrofit kit Article Code Intermediate gearbox retrofit kit 790 041 063 2.000 Swivel cable To prevent twisting of the cable. For all GF, RA and PS machines with protection class II (double insulated). Article Version Cable length [m/ft] Swivel cable complete 230 V, 50/60 Hz EU 4/13.1 790 142 081 0.560 Swivel cable complete 120 V, 50/60 Hz US/CA 4/13.1 790 142 082 0.560 Swivel cable complete 230 V, 50/60 Hz CH 4/13.1 790 142 083 0.560 Swivel cable complete 230 V, 50/60 Hz AU 4/13.1 790 142 084 0.560 Swivel cable complete 120 V, 50/60 Hz GB 4/13.1 790 142 087 0.560 Swivel cable 230 V, 50/60 Hz EU 4/13.1 790 142 076 0.560 Swivel cable 120 V, 50/60 Hz US/CA 4/13.1 790 142 077 0.560 Swivel cable 230 V, 50/60 Hz CH 4/13.1 790 142 078 0.560 Swivel cable 120 V, 50/60 Hz GB 4/13.1 790 142 079 0.560 Swivel cable 230 V, 50/60 Hz AU 4/13.1 790 142 080 0.560 Code Swivel cable Quick-mounting base plate without screw clamps Swivel cable complete Complete with screws and nuts to mount the GFX 3.0 on a work bench. Article Code Quick-mounting base plate complete for GFX 3.0, RA 21 S 790 041 026 2.380 Quick-mounting base plates with integrated screw clamps Quick-mounting base plate without screw clamps For quick mounting of the machine on work benches. Ideal for frequent changes of location. Article Code Quick-mounting base plate for GFX 3.0, RA 21 S 790 041 027 4.230 Quick-mounting base plate for GF 4, RA 4 (H), RA 6 (H), RA 8 (H), RA 41 Plus (H) 790 042 027 6.165 Quick-mounting base plate for PS 4.5 and PS 6.6 790 048 334 2.600 Quick-mounting base plates with integrated screw clamps E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 15

Accessories for GF & RA Machines Pipe feeder base unit and extension unit The pipe feeder accurately feeds long and heavy pipes into GF and RA machines. Very sturdy and stable design with powder-coated frames and stainless steel rollers. Advantages: Extremely stable and sturdy Fast adjustment of dimensions Centerline of tubes and pipes adjust easily in seconds Steel frame coated for maintenancefree finish Rollers made of stainless steel Extension of the Pipe Feeder possible with Extension Unit Saves time and money No contamination Perfect for all kinds of steel Pipe feeder base unit Base unit: Fits all pipe cutting and beveling machines in the GF and RA series from Orbitalum Tools (except the RA 21 S and GF 20 AVM. GFX 3.0, PS 4.5 and PS 6.6 on request). The machines can be directly mounted onto the base plate of the pipe feeder base unit, without further parts. The machines can be easily adjusted to the required cutting dimension using the handwheel-operated mechanical height adjustment. The machine is securely fastened to the base plate. 250 mm (9.8 inch) 1600 mm (63 inch) 460 mm (18.1 inch) Slideway: 68 mm (2.68 inch) 542 mm (21.3 inch) 508 mm (20 inch) 1050 mm (41.3 inch) Extension unit: To extend the base unit, can be used singularly or in multiples, easily bolted together. 1600 mm (63 inch) 460 mm (18.1 inch) Pipe feeder extension unit 1050 mm (41.3 inch) 16 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Accessories for GF & RA Machines Floor bracket accessory: To fasten the base unit or the extension unit to the floor. The assembly consists of 4 brackets and 8 bolts with washers. Application range/ Technical data Pipe OD Dimensions approx. Load capacity max. Height-adjustable mounting plate (adjusting range) Pipe feeder base unit 16-325 mm 0.63-12.8 inch 185 x 105 x 50 cm 72.8 x 41.3 x 19.7 inch 400 881.8 lbs 68 mm 2.68 inch Pipe feeder extension unit 16-325 mm 0.63-12.8 inch approx. 160 x 105 x 50 62.9 x 41.3 x 19.7 inch 400 881.8 lbs Article Code Pipe feeder base unit 790 068 051 116.000 Pipe feeder extension unit 790 068 061 72.000 Floor bracket accessory 790 068 053 1.900 Mobile Workstation For the mobile site and/or workshop. The ideal addition for all Orbitalum pipe cutters (with exception of GF 20 AVM. GFX 3.0, PS 4.5 and PS 6.6 on request). Safe and easy transportation of machines and equipment on site Flexible operation at each working station Elimination of material handling and setting up of the machines e.g. no requirement to mount the machines to benches Height-adjustable pipe support with stainless steel roller The tool box comes with 4 drawers for tools and equipment and is lockable Lifting table with height adjustment of the GF- and RA-machines to the required pipe dimension Accurate and clean work by swarf collection tray Mobile Workstation Technical data Dimensions (hxlxw) Load capacity max. Mobile Workstation 91 x 115 x 43 cm 35.8 x 45.3 x 16.9 inch 675 1488.1 lbs Article Code Mobile Workstation 790 068 071 137.000 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 17

Cutting & Beveling Blades - GF & RA For highest requirements and longest service life 18 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Cutting & Beveling Blades - GF & RA Saw blades and bevel cutters for GF and RA machines These saw blades and bevel cutters are especially designed for our pipe cutters for highest requirements and longest service life. 4 different ranges of saw blades are available: Economy Range for low and non-alloy steels and cast iron pipes Performance Range for high-alloy steels (stainless steel) High Performance Range for high-performance materials and high-alloy steels Premium Range especially made for stainless steel applications with extra long durability Saw blade Economy Workable pipe materials Al Mild steel, Cu, CuNi, CuZn, CuSn INOX, V2A, V4A, 304, 316 (L) Ti, Duplex, Inconel Economy * * Performance * * High-Performance * * * Premium * Saw blades Minimum purchase: 5 blades Version Pipe wall thickness Saw blade Ø Code [mm] [inch] [mm] [inch] Economy 1.2-2.5.047 -.098 63 2.480 790 041 135 0.035 Economy* 1.5-6.0.059 -.236 68 2.677 790 042 063 0.036 Economy 2.0-5.5.079 -.217 63 2.480 790 041 020 0.032 Economy 2.5-7.0.098 -.276 68 2.677 790 042 020 0.045 Economy* 5.0-12.0.197 -.472 80 2.953 790 043 030 0.053 Economy* 6.0-15.0.236 -.591 100 3.937 790 047 030 0.117 Performance 0.6-1.2.024 -.047 63 2.480 790 041 036 0.027 Performance 1.0-1.6.039 -.063 68 2.677 790 042 049 0.040 Performance 1.0-3.0.039 -.118 63 2.480 790 048 072 0.025 Performance 1.2-2.5.047 -.098 63 2.480 790 041 035 0.045 Performance 1.2-2.5.047 -.098 68 2.677 790 042 064 0.050 Performance** 1.2-2.5.047 -.098 100 3.937 790 043 036 0.104 Performance 1.2-3.0.047 -.118 83 3.268 790 043 024 0.060 Performance 1.5-2.5.059 -.098 80 3.150 790 046 022 0.085 Performance 2.5-5.5.098 -.217 63 2.480 790 041 048 0.035 Performance** 2.5-5.5.098 -.217 100 3.937 790 043 038 0.104 Performance 2.5-7.0.098 -.276 68 2.677 790 042 048 0.045 Performance 2.5-7.0.098 -.276 80 3.150 790 043 018 0.060 Performance 6.0-10.0.236 -.394 80 2.953 790 043 022 0.055 Performance** 6.0-15.0.236 -.591 100 3.937 790 047 026 0.105 High-Performance 1.2-2.5.047 -.098 80 3.150 790 046 021 0.064 High-Performance 1.2-2.5.047 -.098 63 2.480 790 041 034 0.031 High-Performance 2.5-7.0.098 -.267 68 2.677 790 042 058 0.045 Premium 1.2-2.5.047 -.098 63 2.480 790 041 049 0.033 Saw blade Performance Saw blade High-Performance * applicable only for aluminum pipes ** only for RA 6, RA 8, RA 12 and GF 20 AVM Saw blade Premium E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 19

Cutting & Beveling Blades - GF & RA Saw blades Saw blades with additional borehole. Minimum purchase: 5 blades Version Pipe wall thickness Saw blade Ø Code [mm] [inch] [mm] [inch] Performance 1.2-2.5.047 -.098 63 2.480 790 041 435 0.030 Performance 1.2-2.5.047 -.098 68 2.677 790 042 464 0.037 Performance 1.5-2.5.059 -.098 80 3.150 790 046 422 0.080 Performance 2.5-7.0.098 -.276 68 2.677 790 042 448 0.036 Saw blade/bevel cutter combinations Saw blade with additional borehole Simultaneous cutting and beveling of pipes in just seconds. Weld-prep saw blade/bevel cutter combinations (V-prep)* Version Pipe wall thickness Beveling angle Height of bevel max. Saw blade Ø [mm] [inch] [ ] [mm] [inch] [mm] [inch] Performance 1.2-3.0.047 -.118 30 3.118 63 2.480 790 044 050 0.090 Performance 2.5-7.0.098 -.276 30 7.276 68 2.677 790 042 161 0.108 High-Performance 2.5-5.0.098 -.197 35 5.197 68 2.677 790 042 015 0.120 High-Performance 2.5-6.0.098 -.236 45 4.157 68 2.677 790 042 023 0.135 High-Performance 2.5-7.0.098 -.276 30 7.276 68 2.677 790 042 013 0.108 Code Weld-prep saw blade/bevel cutter combinations (V-prep) Replacement parts for weld-prep saw blade/bevel cutter combinations (V-prep)* Article Version Code Saw blade for 790 044 050 Performance 790 044 040 0.027 Bevel cutter 30 for 790 044 050 Performance 790 044 049 0.065 Saw blade for 790 042 155, 790 042 157 and Performance 790 042 153 0.040 790 042 161 Bevel cutter 30 for 790 042 161 Performance 790 042 160 0.060 Saw blade for 790 042 018, 790 042 015, High-Performance 790 042 016 0.040 790 042 023, 790 042 013 Bevel cutter 30 for 790 042 013 High-Performance 790 042 021 0.077 Support disc for saw blade/bevel cutter combinations We recommend the use of 1 support disc for the saw blade/bevel cutter combination. Press fitting saw blade/bevel cutter combination Article Code Support disc 790 046 188 0.068 Press fitting saw blade/bevel cutter combinations** Version Pipe wall thickness Beveling angle Height of bevel max. Saw blade Ø [mm] [inch] [ ] [mm] [inch] [mm] [inch] Performance 1.0-2.0.039 -.079 45 / 70 0.4/1.0.016/.039 63 2.480 790 044 046 0.090 High-Performance 1.0-2.0.039 -.079 45 / 70 0.4/1.0.016/.039 63 2.480 790 044 047 0.090 Code 20 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Cutting & Beveling Blades - GF & RA Replacement parts for press fitting saw blade/bevel cutter combinations Article Version Code Saw blade for 790 044 046 Performance 790 044 040 0.027 Saw blade for 790 044 047 High-Performance 790 044 041 0.030 * Consisting of one saw blade and one bevel cutter. It is possible to order the individual parts separately. ** Consisting of one saw blade and one bevel cutter. Especially for stainless steel press fitting systems. It is possible to order the individual parts separately. Bevel cutters For V-prep profiles on pipe ends. The bevel cutter is mounted on the RA pipe cutter instead of a saw blade. Reproducible weld seam preparation in just seconds. Bevel cutters V-prep Version Beveling angle Height of bevel max. [ ] [mm] [inch] [mm] [inch] Bevel cutter Ø Code Economy 30.0 9.5.374 72 2.835 790 042 045 0.135 Economy 35.0 8.9.350 70 2.756 790 042 037 0.170 Economy 37.5 8.4.331 70 2.756 790 042 036 0.162 Economy 45.0 7.5.295 70 2.756 790 042 038 0.162 Performance 30.0 9.5.374 72 2.835 790 042 071 0.153 Performance 30.0 13.0.512 76 2.992 790 043 023 0.187 Performance 30.0 20.0*.787* 100 3.937 790 043 027 0.250 Performance 37.5 8.4.331 70 2.756 790 042 070 0.163 High-Performance 30.0 9.5.374 72 2.835 790 042 073 0.157 High-Performance 37.5 8.4.331 70 2.756 790 042 072 0.163 Bevel cutter V-prep * Height of bevel max. 20 mm (0.787 inch) only with aluminum pipes. Other pipe materials: max. 13 mm (0.512 inch). Saw blade lubricant GF TOP Synthetic high-performance lubricant for cutting and beveling machines. Increases the tool life of the saw blade. Compliant with the food approval NSF H2. The screwable brush guarantees an easy and uniform application of lubricant on the saw blade. Article Version Code Saw blade lubricant GF TOP Tube, 180 g 790 060 228 0.205 GF TOP Saw blade lubricant GF LUB The NEW chlorine-free high-performance lubricant for cutting and beveling. Increases the tool life of the saw blade. This ecologically cutting compound is the environmentally friendly replacement for ROCOL: just with a new name and improved quality. GF LUB meets the latest environmental directives and ecological standards. Article Version Code Saw blade lubricant GF LUB Tube, 160 ml 790 041 016 0.144 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 21 GF LUB

Pipe Cutting & Beveling Machines PS Tube cutting made portable and easy 22 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Pipe Cutting & Beveling Machines PS Portable Tube Saws Lightweight and easily transportable machine (only 23 (PS 4.5) or 26 (PS 6.6)), to provide flexibility for on-site applications Deformation-free clamping of thin-walled tubes For cutting of thin-walled tubes and elbows No rework necessary because of a burr-free and square cut Cold cutting process prevents corrosion Integrated line laser to identify the cut-off point Orbital cutting process saves time Multi-point clamping of the tube Fast adjustment of tube dimensions Long saw blade service life Press fitting saw blade combinations can be used* PS 4.5, PS 6.6 Tube cutting made easy. Cutting thin-walled stainless-steel tubes and elbows using the superior "Planetary Cutting Technology". Deformation-free clamping system by integrated clamping jaws made from coated cast aluminum for different tube diameters. Machine comes with: 1 Portable Tube Saw PS 4.5 or PS 6.6 1 Set of cast aluminum clamping jaws 1 Durable storage and shipping case 1 Saw blade, already mounted on the PS-machine (Code 790 048 072) 1 Tool bag equipped with tools 1 Tube of saw blade lubricant GF TOP (Code 790 060 228) 1 Set of operating instructions and spare parts list PS 4.5 Application range PS 4.5 PS 6.6 Tube OD 6-120 mm 0.236-4.724 inch 50** - 170 mm 1.969** - 6.693 inch Elbow OD 30-120 mm 1.181-4.724 inch 50** - 170 mm 1.969** - 6.693 inch Wall thickness max. < 3 mm < 0.118 inch < 3 mm < 0.118 inch Technical data Electric drive (single-phase AC motor) Dimensions 480 x 230 x 600 mm 20.9 x 9.1 x 23.6 inch 480 x 230 x 660 mm 20.9 x 9.1 x 26 inch Power 1100 W 1.5 hp 1100 W 1.5 hp Protection class Protection isolated class II, DIN VDE 0740 Speed 30-165 rpm 30-165 rpm Vibration level (EN 28662, part 1) < 2.5 m/s 2 < 2.5 m/s 2 Noise level at the workplace approx. 78 db (A) approx. 78 db (A) * Only with saw blade/bevel cutter combinations of Orbitalum Tools: Code 790 044 046 or 790 044 047. Especially for stainless steel press fitting systems. Consisting of one saw blade and one bevel cutter. It is possible to order the individual parts separately. Workable wall thickness: 1-2 mm (0.039-0.079 inch), beveling angle: 45 /70, height of bevel: max. 0.4/1 mm (0.016/.0.039 inch). ** It is possible to cut tubes with a outer diameter min. 30 mm (1.181 inch) with the PS 6.6 by using additional clamping jaws (accessory, Code 790 048 380). These clamping jaws are delivered as a standard with the PS 4.5. PS 6.6 Article Version Code Weight of machine Shipping weight PS 4.5 230 V, 50/60 Hz EU 790 048 001 23.600 37.000 PS 4.5 110 V, 50/60 Hz EU 790 048 002 23.600 37.000 PS 4.5 120 V, 50/60 Hz US 790 048 003 23.600 37.000 PS 6.6 230 V, 50/60 Hz EU 790 049 001 26.300 41.000 PS 6.6 110 V, 50/60 Hz EU 790 049 002 26.300 41.000 PS 6.6 120 V, 50/60 Hz US 790 049 003 26.300 41.000 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 23

Pipe Cutting & Beveling Machines PS Accessories for PS machines Quick-mounting plate with screw clamps Quick and easy mounting of the machine to the bench with no drilling. Including 4 socket head screws to fix the PS to the quick-mounting base plate. Quick-mounting plate with screw clamps Article Code Quick-mounting plate with screw clamps 790 048 334 2.600 Saw blades Performance range for high-alloy steels (stainless steel). Recommended saw blades for the Portable Tube Saws PS 4.5 and PS 6.6. Saw blade Performance Version Tube wall thickness [mm] Tube wall thickness [inch] Saw blade Ø [mm] Saw blade Ø [inch] Performance 1.0-3.0 0.039-0.118 63 2.480 790 048 072 0.035 Performance 0.6-1.2 0.024-0.047 63 2.480 790 041 036 0.027 Code Tripod Made of stainless steel. For easy mounting of PS machines directly on the tripod with no base plate. Space saving fast application easy handling. Article Code Tripod 790 048 335 10.600 Tripod Clamping jaws replacement set Made from coated cast aluminum. Extends the dimension range of the PS 6.6 to OD min. 30 mm (1.181 inch). Article Code Clamping jaws replacement set for PS 4.5 and extension jaws for PS 6.6 790 048 380 2.030 Clamping jaws replacement set Laser retrofitting kit Line laser to identify the cutting point on the tube. Easy mounting on the swivel on the PS machines. Kit contains 1 line laser, 1 laser holder with 2 fixing screws, replacement batteries, 1 set of assembly instructions. Laser retrofitting kit Article Code Laser retrofitting kit for PS 4.5 and PS 6.6 790 048 060 0.150 24 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Metal Tube Cutter MRA Manual cutting of metal tubes in any position E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 25

Metal Tube Cutter MRA Metal Tube Cutter The clever solution for cutting metal tubes manually. This Metal Tube Cutter is especially designed for cramped working places and for chipless cutting processes. Deformation-free and square cut No electricity required Requires little space, for use in limited access areas MRA For manual cutting of metal tubes in any position. Easy to use first-rate cutting technology. The patented cutting technique used in designing the MRA is based on the diameterspecific clamping shells and the flexible multi-roller cutting chain. Both these components are made of hardened, wear resistant steel and provide the following advantages: Long service life of the components The cutting chain is at a right-angle around the tube The MRA runs on track rollers on the clamping shells Minimum hand movements Tubes made of stainless steel can be cut MRA For tube materials: High-alloy steel (stainless steel material e.g. no. 1.40... to 1.45... or 304/316 materials) Low-alloy and unalloyed steel Cast materials Non-ferrous metals Comes with: 1 Metal Tube Cutter MRA* 1 Durable storage and shipping case 1 Socket head key 1 Connection clamp 1 Pair of working gloves 1 Set of operating instructions and spare parts list * without multi-roller cutting chains and without clamping shells (see accessories) Application range Tube OD Wall thickness (depends on material)* Technical data Dimensions MRA 33.7-254.0 mm 1.327-10.000 inch 0.8-3.0 mm 0.031-0.118 inch 450 x 105 mm 17.7 x 4.1 inch * for high-alloy steels, the max. wall thickness which can be processed is 2.0-2.5 mm (0.08-0.09 inch). Article Code Weight of machine Shipping weight Metal Tube Cutter MRA 790 008 001 3.100 8.000 26 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Metal Tube Cutter MRA Accessories for MRA Multi-roller cutting chains Cutting wheels made from hardened steel. Article Tube OD [mm] Tube OD [inch] Number of cutting wheels [pieces] Multi-roller cutting chain for MRA 33.7-114.3 1.330-4.500 15 790 008 018 0.500 Multi-roller cutting chain for MRA 114.3-254.0 4.500-10.000 16 790 008 041 0.900 Code Multi-roller cutting chain Clamping shells Set of two pieces, made from hardened steel. One pair of clamping shells needed for each tube size. Further dimensions of clamping shells are available on request. Article Tube OD [mm] Tube OD [inch] Code Clamping shells for MRA 25.0 0.984 790 008 102 0.750 Clamping shells for MRA 25.4 1.000 790 008 104 0.795 Clamping shells for MRA 29.0 1.142 790 008 103 0.835 Clamping shells for MRA 33.7 1.330 790 008 105 0.885 Clamping shells for MRA 38.1 1.500 790 008 130 0.955 Clamping shells for MRA 40.0 1.575 790 008 135 0.955 Clamping shells for MRA 42.4 1.670 790 008 140 1.005 Clamping shells for MRA 44.5 1.752 790 008 150 1.052 Clamping shells for MRA 48.3 1.900 790 008 155 1.100 Clamping shells for MRA 50.0 1.970 790 008 160 1.130 Clamping shells for MRA 50.8 2.000 790 008 165 1.140 Clamping shells for MRA 52.0 2.050 790 008 175 1.190 Clamping shells for MRA 53.0 2.087 790 008 180 1.150 Clamping shells for MRA 54.0 2.125 790 008 185 1.100 Clamping shells for MRA 57.0 2.244 790 008 190 1.200 Clamping shells for MRA 60.3 2.375 790 008 195 1.315 Clamping shells for MRA 63.5 2.500 790 008 200 1.375 Clamping shells for MRA 65.0 2.559 790 008 203 1.375 Clamping shells for MRA 70.0 2.755 790 008 215 1.445 Clamping shells for MRA 73.0 2.874 790 008 220 1.480 Clamping shells for MRA 75.0 2.950 790 008 225 1.600 Clamping shells for MRA 76.1 2.996 790 008 230 1.560 Clamping shells for MRA 80.0 3.150 790 008 233 1.375 Clamping shells for MRA 84.0 3.300 790 008 240 1.690 Clamping shells for MRA 85.0 3.350 790 008 245 1.750 Clamping shells for MRA 88.9 3.500 790 008 250 1.780 Clamping shells for MRA 100.0 3.937 790 008 255 1.970 Clamping shells for MRA 101.6 4.000 790 008 260 2.025 Clamping shells for MRA 104.0 4.095 790 008 270 1.925 Clamping shells for MRA 108.0 4.252 790 008 280 2.100 Clamping shells for MRA 110.0 4.330 790 008 285 2.150 Clamping shells for MRA 114.3 4.500 790 008 290 2.295 Clamping shells for MRA 129.0 5.080 790 008 315 3.000 Clamping shells for MRA 139.7 5.500 790 008 325 3.365 Clamping shells for MRA 150.0 5.906 790 008 333 3.375 Clamping shells for MRA 152.4 6.000 790 008 335 3.232 Clamping shells for MRA 154.0 6.060 790 008 340 3.365 Clamping shells for MRA 160.0 6.300 790 008 355 3.520 Clamping shells for MRA 165.0 6.496 790 008 360 4.125 Clamping shells for MRA 168.3 6.625 790 008 365 3.600 Clamping shells for MRA 204.0 8.030 790 008 380 4.375 Clamping shells for MRA 219.1 8.625 790 008 385 4.680 Clamping shells for MRA 228.6 9.000 790 008 387 4.890 Clamping shells for MRA 254.0 10.000 790 008 390 5.420 Clamping shells E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 27

Tube Squaring Machines The required, high-quality tube end preparation for orbital welding 28 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Tube Squaring Machines Tube Squaring Machines Squaring tube ends with a high-quality finish Burr-free and square Beveling possible with a special tool holder Quick clamping system for tools, clamping shells and tubes Preparation of thin-walled stainless steel tubes (V4A) and micro fittings High-performance coated tool bit with two cutting edges Micrometer feed for optimum results No additional tools required for operation Space saving, light weight and portable machine for a mobile and secure application Modular design, ensuring compatibility within the RPG series The special adaptor clamping shell allows the RPG 2.5 to be used with the clamping shells for the RPG 1.5 machines Very short design (cordless versions) new new RPG XS Cordless Improved features in the electric versions: Machine with rotating/removable drive Built-in electronic speed regulation with speed stabilization: Vario-Tachometer-Constamatic (VTC) full wave electronics Restart protection to prevent the machine from starting in an uncontrolled way after it has been re-connected to the electric mains or after the voltage supply has been re-established after a power failure RPM regulator Sturdy marathon motor Overload protection Shut-off carbon brushes Carbon wear indicator RPG XS Cordless angle drive RPG ONE Improved features in the cordless versions thanks to lithium-ion technology: Motor with high performance and small size No memory effect Single cell monitoring in the cordless pack Electronic overload protection with integrated temperature monitor Robust cordless packs with capacity display Minimal self-discharge Environmentally friendly AIR-COOLED technology for short charging times and a long service life RPG ONE Cordless RPG XS, RPG ONE, RPG 1.5, RPG 2.5 Designed for burr-free squaring and beveling of thin-walled stainless steel tubes and micro fittings. For the required, high quality tube end preparation for orbital welding. Machine comes with: 1 Tube Squaring Machine RPG XS, RPG ONE, RPG 1.5 or RPG 2.5 (cordless) 1 Durable storage and shipping case 2 Rechargeable batteries, 1 battery charger (for cordless versions only) 1 Overload protection (square nut, not for RPG XS and RPG ONE) 1 Tool holder (Code 790 037 152. RPG XS: Code 790 033 150) 1 Multifunctional tool (Code 790 038 314) 1 Adapter clamping shell (Code 790 030 094, only for RPG 2.5) 1 Tool set 1 Set of operating instructions and spare parts list Bench stand for cordless machines optional available (Code 790 037 169). RPG 1.5 RPG 1.5 Cordless E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 29

Tube Squaring Machines RPG 2.5 Application range RPG XS RPG ONE RPG ONE RPG 1.5 RPG 1.5 RPG 2.5 RPG 2.5 Cordless Cordless Cordless Cordless Tube OD min.-max. [mm] 3.0-19.05 3.0-25.4 3.0-25.4 3.0-38.1 3.0-38.1 6.35* - 63.5 6.35* - 63.5 [inch] 0.118-0.75 0.118-1.0 0.118-1.0 0.118-1.5 0.118-1.5 0.25* - 2.5 Wall thickness max. [mm] 2.0 3.0 3.0 3.0 3.0 3.0 3.0 [inch] 0.079 0.118 0.118 0.118 0.118 0.118 0.118 Tube materials High-alloy steels (stainless steel material no. 1.40... to 1.45... as per DIN 17455 and DIN 17456), unalloyed and low-alloy steels, aluminum. Technical data Dimensions (lxhxd) [mm] 217x187x53 390x200x70 261x255x80 400x350x160 275x255x90 500x300x170 260x300x320 Built-in electronic variable cutting speed [inch] 8.5x7.4x2.1 15.4x7.9x2.8 10.3x10x3.2 15.8x13.8x6.3 10.8x10x3.5 19.7x11.8x6.7 10.2x11.8x12.6 [rpm] 0-350 145-380 0-400 145-380 0-400 1. speed: 9-2 2. speed: 27-153 Power [W] 1100 1100 1100 Voltage of [V] 10.8 18 18 18 rechargeable battery Capacity [Ah] 1.5 2.6 2.6 2.6 Sound pressure level (EN 23741) 1. speed: 0-24 2. speed: 0-83 [db (A)] approx.78 approx.78 approx.78 approx.78 approx.78 approx.78.2 approx.78.2 Vibration level (EN 50144) [m/s²] < 2.5 < 2.5 < 2.5 < 2.5 < 2.5 < 2.5 < 2.5 * only with special adapter clamping shell (supplied as standard with RPG 2.5) RPG 2.5 Cordless Article Version Code Weight of machine Shipping weight RPG XS Cordless (10.8 V) 230 V, 50/60 Hz EU 790 033 001 1.320 RPG XS Cordless (10.8 V) 115 V, 60 Hz US 790 033 002 1.320 RPG XS Cordless angle drive (10.8 V) 230 V, 50/60 Hz EU 790 033 011 1.520 RPG XS Cordless angle drive (10.8 V) 115 V, 60 Hz US 790 033 012 1.520 RPG ONE 230 V, 50/60 Hz EU 790 036 031 4.140 9.600 RPG ONE 120 V, 50/60 Hz US 790 036 032 4.140 9.600 RPG ONE 110 V, 50/60 Hz EU 790 036 033 4.140 9.600 RPG ONE Cordless (18 V) 230 V, 50/60 Hz EU 790 036 021 2.880 8.200 RPG ONE Cordless (18 V) 115 V, 60 Hz US 790 036 022 2.880 8.200 RPG 1.5 230 V, 50/60 Hz EU 790 037 001 3.880 9.500 RPG 1.5 120 V, 50/60 Hz US 790 037 002 3.880 9.500 RPG 1.5 110 V, 50/60 Hz EU 790 037 003 3.880 9.500 RPG 1.5 Cordless (18 V) 230 V, 50/60 Hz EU 790 037 011 3.440 10.100 RPG 1.5 Cordless (18 V) 115 V, 60 Hz US 790 037 012 3.440 10.100 RPG 2.5 230 V, 50/60 Hz EU 790 030 001 6.600 12.500 RPG 2.5 120 V, 50/60 Hz US 790 030 002 6.600 12.500 RPG 2.5 110 V, 50/60 Hz EU 790 030 003 6.600 12.500 RPG 2.5 Cordless (18 V) 230 V, 50/60 Hz EU 790 030 011 5.340 11.320 RPG 2.5 Cordless (18 V) 110 V, 60 Hz US 790 030 012 5.340 11.320 Angle drive RPG ONE (cordless) and RPG 1.5 (cordless) The angle drive is optionally available and may be retrofitted to the RPG ONE and RPG 1.5 (cordless). The squaring machine reduces the design length to 200 mm (7.874 inch). Technical characteristics remain unchanged. Angle drive Article Code Angle drive for RPG ONE and RPG 1.5 (cordless) 790 037 400 0.475 30 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Tube Squaring Machines Accessories for RPG XS, RPG ONE, RPG 1.5, RPG 2.5 Please check the outer diameter of the tubes before ordering the clamping shells. One-piece stainless steel clamping shells Extremely durable. Assures accurate centering and quick clamping shell change without any tools with its unique design and positive clamping shell mechanism. Further dimensions of clamping shells are available. Applicable with Applicable for Tube OD Tube clamping length Code [mm] [inch] [mm] [inch] RPG XS Tubes 6.35 0.250 10.00 0.394 790 033 202 0.108 RPG XS Tubes 8.00 0.315 10.00 0.394 790 033 203 0.106 RPG XS Tubes 9.53 0.375 10.00 0.394 790 033 204 0.105 RPG XS Tubes 10.00 0.394 10.00 0.394 790 033 205 0.105 RPG XS Tubes 12.70 0.500 10.00 0.394 790 033 206 0.101 RPG XS Tubes 13.50 0.531 10.00 0.394 790 033 207 0.100 RPG XS Tubes 19.05 0.750 10.00 0.394 790 033 209 0.090 RPG XS Micro fittings 6.35 0.250 10.00 0.394 790 033 301 0.056 RPG ONE Tubes 3.00 0.118 10.00 0.394 790 036 232 0.118 RPG ONE Tubes 3.18 0.125 10.00 0.394 790 036 201 0.119 RPG ONE Tubes 6.00 0.236 10.00 0.394 790 036 213 0.117 RPG ONE Tubes 6.35 0.250 10.00 0.394 790 036 202 0.118 RPG ONE Tubes 7.00 0.276 10.00 0.394 790 036 214 0.118 RPG ONE Tubes 8.00 0.315 10.00 0.394 790 036 215 0.116 RPG ONE Tubes 9.53 0.375 10.00 0.394 790 036 203 0.115 RPG ONE Tubes 10.00 0.394 10.00 0.394 790 036 204 0.115 RPG ONE Tubes 10.10 0.398 10.00 0.394 790 036 222 0.114 RPG ONE Tubes 11.00 0.433 10.00 0.394 790 036 226 0.112 RPG ONE Tubes 12.00 0.472 10.00 0.394 790 036 205 0.112 RPG ONE Tubes 12.10 0.476 10.00 0.394 790 036 223 0.111 RPG ONE Tubes 12.70 0.500 10.00 0.394 790 036 206 0.111 RPG ONE Tubes 13.50 0.531 10.00 0.394 790 036 227 0.110 RPG ONE Tubes 14.00 0.551 10.00 0.394 790 036 228 0.108 RPG ONE Tubes 14.10 0.555 10.00 0.394 790 036 224 0.107 RPG ONE Tubes 15.00 0.590 10.00 0.394 790 036 216 0.107 RPG ONE Tubes 15.60 0.614 10.00 0.394 790 036 225 0.105 RPG ONE Tubes 15.88 0.625 10.00 0.394 790 036 211 0.105 RPG ONE Tubes 16.00 0.630 10.00 0.394 790 036 212 0.104 RPG ONE Tubes 17.00 0.670 10.00 0.394 790 036 221 0.103 RPG ONE Tubes 17.20 0.677 10.00 0.394 790 036 207 0.104 RPG ONE Tubes 18.00 0.709 10.00 0.394 790 036 217 0.102 RPG ONE Tubes 19.05 0.750 10.00 0.394 790 036 208 0.100 RPG ONE Tubes 20.00 0.787 10.00 0.394 790 036 230 0.096 RPG ONE Tubes 21.30 0.839 10.00 0.394 790 036 209 0.094 RPG ONE Tubes 21.70 0.854 10.00 0.394 790 036 220 0.093 RPG ONE Tubes 22.00 0.866 10.00 0.394 790 036 218 0.093 RPG ONE Tubes 23.00 0.906 10.00 0.394 790 036 219 0.085 RPG ONE Tubes 25.00 0.984 10.00 0.394 790 036 231 0.081 RPG ONE Tubes 25.40 1.000 10.00 0.394 790 036 210 0.083 RPG ONE Micro fittings 6.00 0.236 4.00 0.157 790 036 304 0.066 RPG ONE Micro fittings 6.35 0.250 4.00 0.157 790 036 301 0.066 RPG ONE Micro fittings 8.00 0.315 4.00 0.157 790 036 307 0.065 RPG ONE Micro fittings 9.53 0.375 4.00 0.157 790 036 302 0.064 RPG ONE Micro fittings 10.00 0.394 4.00 0.157 790 036 305 0.065 RPG ONE Micro fittings 12.00 0.472 4.00 0.157 790 036 306 0.064 RPG ONE Micro fittings 12.70 0.500 4.00 0.157 790 036 303 0.062 RPG 1.5 Tubes 3.00 0.118 15.00 0.591 790 037 220 0.300 RPG 1.5 Tubes 3.18 0.125 15.00 0.591 790 037 221 0.308 RPG 1.5 Tubes 4.00 0.157 15.00 0.591 790 037 222 0.308 RPG 1.5 Tubes 4.78 0.188 15.00 0.591 790 037 223 0.308 RPG 1.5 Tubes 5.00 0.197 15.00 0.591 790 037 224 0.290 RPG 1.5 Tubes 6.00 0.236 15.00 0.591 790 037 225 0.310 RPG 1.5, RPG 2.5 Tubes 6.35 0.250 15.00 0.591 790 037 226 0.306 RPG 1.5, RPG 2.5 Tubes 7.00 0.276 15.00 0.591 790 037 257 0.306 RPG 1.5, RPG 2.5 Tubes 8.00 0.314 15.00 0.591 790 037 227 0.299 One-piece stainless steel clamping shell One-piece stainless steel clamping shell for micro fittings E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 31

Tube Squaring Machines RPG 1.5 RPG 2.5 Applicable with Applicable for Tube OD Tube clamping length Code [mm] [inch] [mm] [inch] RPG 1.5, RPG 2.5 Tubes 9.00 0.354 15.00 0.591 790 037 254 0.280 RPG 1.5, RPG 2.5 Tubes 9.53 0.375 15.00 0.591 790 037 228 0.297 RPG 1.5, RPG 2.5 Tubes 10.00 0.394 15.00 0.591 790 037 229 0.298 RPG 1.5, RPG 2.5 Tubes 11.00 0.433 15.00 0.591 790 037 293 0.252 RPG 1.5, RPG 2.5 Tubes 11.11 0.437 15.00 0.591 790 037 255 0.295 RPG 1.5, RPG 2.5 Tubes 12.00 0.472 15.00 0.591 790 037 230 0.293 RPG 1.5, RPG 2.5 Tubes 12.70 0.500 15.00 0.591 790 037 231 0.292 RPG 1.5, RPG 2.5 Tubes 13.00 0.512 15.00 0.591 790 037 232 0.291 RPG 1.5, RPG 2.5 Tubes 13.20 0.520 15.00 0.591 790 037 263 0.290 RPG 1.5, RPG 2.5 Tubes 13.50 0.531 15.00 0.591 790 037 233 0.290 RPG 1.5, RPG 2.5 Tubes 14.00 0.551 15.00 0.591 790 037 234 0.288 RPG 1.5, RPG 2.5 Tubes 14.30 0.563 15.00 0.591 790 037 253 0.289 RPG 1.5, RPG 2.5 Tubes 14.70 0.579 15.00 0.591 790 037 290 0.287 RPG 1.5, RPG 2.5 Tubes 15.00 0.591 15.00 0.591 790 037 235 0.286 RPG 1.5, RPG 2.5 Tubes 15.30 0.602 15.00 0.591 790 037 259 0.287 RPG 1.5, RPG 2.5 Tubes 15.70 0.618 15.00 0.591 790 037 291 0.284 RPG 1.5, RPG 2.5 Tubes 15.88 0.625 15.00 0.591 790 037 236 0.285 RPG 1.5, RPG 2.5 Tubes 16.00 0.630 15.00 0.591 790 037 237 0.282 RPG 1.5, RPG 2.5 Tubes 17.00 0.669 15.00 0.591 790 037 256 0.280 RPG 1.5, RPG 2.5 Tubes 17.08 0.672 15.00 0.591 790 037 260 0.281 RPG 1.5, RPG 2.5 Tubes 17.20 0.677 15.00 0.591 790 037 238 0.300 RPG 1.5, RPG 2.5 Tubes 18.00 0.709 15.00 0.591 790 037 239 0.280 RPG 1.5, RPG 2.5 Tubes 19.00 0.748 15.00 0.591 790 037 240 0.277 RPG 1.5, RPG 2.5 Tubes 19.05 0.750 15.00 0.591 790 037 241 0.274 RPG 1.5, RPG 2.5 Tubes 20.00 0.787 15.00 0.591 790 037 242 0.272 RPG 1.5, RPG 2.5 Tubes 21.00 0.827 15.00 0.591 790 037 294 0.270 RPG 1.5, RPG 2.5 Tubes 21.30 0.839 15.00 0.591 790 037 243 0.270 RPG 1.5, RPG 2.5 Tubes 21.70 0.854 15.00 0.591 790 037 261 0.270 RPG 1.5, RPG 2.5 Tubes 22.00 0.866 15.00 0.591 790 037 244 0.264 RPG 1.5, RPG 2.5 Tubes 22.22 0.875 15.00 0.591 790 037 292 0.270 RPG 1.5, RPG 2.5 Tubes 23.00 0.906 15.00 0.591 790 037 245 0.261 RPG 1.5, RPG 2.5 Tubes 24.00 0.945 15.00 0.591 790 037 246 0.256 RPG 1.5, RPG 2.5 Tubes 25.00 0.984 15.00 0.591 790 037 247 0.252 RPG 1.5, RPG 2.5 Tubes 25.40 1.000 15.00 0.591 790 037 248 0.240 RPG 1.5, RPG 2.5 Tubes 26.90 1.059 15.00 0.591 790 037 249 0.260 RPG 1.5, RPG 2.5 Tubes 27.00 1.063 15.00 0.591 790 037 264 0.260 RPG 1.5, RPG 2.5 Tubes 27.20 1.071 15.00 0.591 790 037 262 0.260 RPG 1.5, RPG 2.5 Tubes 28.00 1.102 15.00 0.591 790 037 250 0.238 RPG 1.5, RPG 2.5 Tubes 29.00 1.142 15.00 0.591 790 037 251 0.235 RPG 1.5, RPG 2.5 Tubes 30.00 1.181 15.00 0.591 790 037 252 0.232 RPG 1.5, RPG 2.5 Tubes 31.80 1.250 15.00 0.591 790 037 280 0.230 RPG 1.5, RPG 2.5 Tubes 32.00 1.260 15.00 0.591 790 037 258 0.226 RPG 1.5, RPG 2.5 Tubes 33.40 1.315 15.00 0.591 790 037 281 0.220 RPG 1.5, RPG 2.5 Tubes 33.70 1.327 15.00 0.591 790 037 282 0.218 RPG 1.5, RPG 2.5 Tubes 34.00 1.339 15.00 0.591 790 037 283 0.210 RPG 1.5, RPG 2.5 Tubes 35.00 1.377 15.00 0.591 790 037 284 0.210 RPG 1.5, RPG 2.5 Tubes 36.00 1.417 15.00 0.591 790 037 285 0.204 RPG 1.5, RPG 2.5 Tubes 38.00 1.496 15.00 0.591 790 037 286 0.199 RPG 1.5, RPG 2.5 Tubes 38.10 1.500 15.00 0.591 790 037 287 0.194 RPG 2.5 Tubes 40.00 1.575 15.00 0.591 790 030 234 0.565 RPG 2.5 Tubes 41.00 1.614 15.00 0.591 790 030 230 0.560 RPG 2.5 Tubes 42.00 1.654 15.00 0.591 790 030 117 0.500 RPG 2.5 Tubes 42.40 1.669 15.00 0.591 790 030 227 0.483 RPG 2.5 Tubes 42.70 1.681 15.00 0.591 790 030 224 0.483 RPG 2.5 Tubes 43.00 1.693 15.00 0.591 790 030 231 0.544 RPG 2.5 Tubes 44.50 1.752 15.00 0.591 790 030 228 0.483 RPG 2.5 Tubes 48.30 1.902 15.00 0.591 790 030 226 4.990 RPG 2.5 Tubes 50.80 2.000 15.00 0.591 790 030 220 0.483 RPG 2.5 Tubes 51.00 2.008 15.00 0.591 790 030 233 0.482 RPG 2.5 Tubes 52.00 2.047 15.00 0.591 790 030 225 0.483 RPG 2.5 Tubes 53.00 2.087 15.00 0.591 790 030 232 0.457 RPG 2.5 Tubes 54.00 2.126 15.00 0.591 790 030 221 0.452 RPG 2.5 Tubes 55.00 2.165 15.00 0.591 790 030 235 0.440 RPG 2.5 Tubes 57.00 2.244 15.00 0.591 790 030 229 0.419 RPG 2.5 Tubes 60.30 2.374 15.00 0.591 790 030 222 0.386 RPG 2.5 Tubes 63.50 2.500 15.00 0.591 790 030 223 0.350 RPG 2.5 Tubes 65.00 2.559 15.00 0.591 790 030 236 0.330 RPG 1.5 Micro fittings 3.00 0.118 4.00 0.157 790 037 300 0.241 RPG 1.5 Micro fittings 3.18 0.125 4.00 0.157 790 037 301 0.227 32 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Tube Squaring Machines Applicable with Applicable for Tube OD Tube clamping length Code [mm] [inch] [mm] [inch] RPG 1.5 Micro fittings 4.00 0.157 4.00 0.157 790 037 302 0.237 RPG 1.5 Micro fittings 4.78 0.188 4.00 0.157 790 037 303 0.234 RPG 1.5 Micro fittings 5.00 0.197 4.00 0.157 790 037 304 0.228 RPG 1.5 Micro fittings 6.00 0.236 4.00 0.157 790 037 305 0.220 RPG 1.5, RPG 2.5 Micro fittings 6.35 0.250 4.00 0.157 790 037 306 0.460 RPG 1.5, RPG 2.5 Micro fittings 8.00 0.314 4.00 0.157 790 037 307 0.223 RPG 1.5, RPG 2.5 Micro fittings 9.53 0.375 4.00 0.157 790 037 308 0.300 RPG 1.5, RPG 2.5 Micro fittings 10.00 0.394 4.00 0.157 790 037 309 0.222 RPG 1.5, RPG 2.5 Micro fittings 12.00 0.472 4.00 0.157 790 037 310 0.220 RPG 1.5, RPG 2.5 Micro fittings 12.50 0.492 4.00 0.157 790 037 317 0.220 RPG 1.5, RPG 2.5 Micro fittings 12.70 0.500 4.00 0.157 790 037 311 0.220 RPG 1.5, RPG 2.5 Micro fittings 17.20 0.678 4.00 0.157 790 037 312 0.220 RPG 1.5, RPG 2.5 Micro fittings 19.00 0.748 4.00 0.157 790 037 314 0.216 RPG 1.5, RPG 2.5 Micro fittings 19.05 0.750 4.00 0.157 790 037 315 0.215 RPG 1.5, RPG 2.5 Micro fittings 21.20 0.835 4.00 0.157 790 037 313 0.213 RPG 1.5, RPG 2.5 Micro fittings 21.30 0.839 4.00 0.157 790 037 318 0.212 Tool holder WH Fits multifunctional tool 790 038 314. incl. Torx fixing screw. For max. wall thickness 3 mm (0.118 inch). Application range of tool holders WH12-I/Standard* Code 790 037 152 WH12-I Code 790 037 154 WH12-I/micro fittings** Code 790 037 156 WH3-V-30 Code 790 037 158 WH3-V-35 Code 790 037 159 WH3-V-45*** Code 790 037 157 WH-I Code 790 033 150 WH-I Code 790 033 151 Possible application Beveling angle Squaring Beveling [ ] x x x x 30 x 35 x 45 x x Recommended application range RPG XS cordless RPG ONE (cordless) Tube OD RPG 1.5 (cordless) RPG 2.5 (cordless) [mm] 6.0-12.7 6.0-25.4 6.0-38.1 6.0-63.5 [inch] 0.236-0.5 0.236-1.0 0.236-1.5 0.236-2.5 [mm] 12.7-25.4 12.7-38.1 12.7-63.5 [inch] 0.5-1.0 0.5-1.5 0.5-2.5 [mm] 3.0-21.2 6.35-21.2 [inch] 0.118-0.84 0.25-0.84 [mm] max. 35.0 max. 60.3 [inch] max. 1.378 max. 2.374 [mm] max. 33.7 max. 59.3 [inch] max. 1.327 max. 2.335 [mm] max. 33.7 max. 59.0 [inch] max. 1.327 max. 2.3 [mm] 3.0-12.0 3.0-19.05 [inch] 0.118-0.472 0.118-0.75 [mm] 12.0-19.05 12.0-19.05 [inch] 0.472-0.75 0.472-0.75 Tool holder WH Article Code Standard tool holder WH12-I* 790 037 152 0.040 Optional tool holder WH12-I 790 037 154 0.050 Optional tool holder for micro fittings WH12-I** 790 037 156 0.100 Tool holder WH3-V-30 790 037 158 0.024 Tool holder WH3-V-35 790 037 159 0.024 Tool holder WH3-V-45*** 790 037 157 0.022 Tool holder WH-I 790 033 150 Tool holder WH-I 790 033 151 * Supplied as standard with the RPG ONE, RPG 1.5, RPG 2.5. ** Only to be used with stainless steel clamping shells for micro fittings. *** Not applicable with the RPG XS and the RPG ONE. Multifunctional tool MFW Two-sided tool bit with protective coating against tool wear. Usable for all machines of the RPG series. Article Quantity Code Multifunctional tool MFW-P-2 1 790 038 314 0.003 Multifunctional tool MFW-P-2 10 790 038 315 0.045 Torx screw (RPG ONE, RPG 1.5, RPG 2.5) 1 790 086 220 0.002 Torx screw (RPG XS) 1 790 086 217 0.002 Multifunctional tool MFW E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 33

Tube Squaring Machines The clean and high-value solution for specific welding preparations 34 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Tube Squaring Machines Tube Squaring Machines Squaring tube ends with a high-quality finish Burr-free and square Beveling possible with a special tool holder (only with the RPG 4.5 and RPG 8.6) Quick clamping system for tools, clamping shells and tubes Preparation of thin-walled stainless steel tubes (V4A) High-performance coated tool bit with two cutting edges Built-in electronic speed regulation Micrometer feed for optimum results Space saving, light weight and portable machine for a mobile and secure application Additional advantages with the RPG 4.5 S: Integrated clamping jaws made from coated cast aluminum for different tube diameters Cost-effective as no dimension-specific clamping shells required Multi-point clamping of the tube RPG 4.5 RPG 4.5, RPG 4.5 S, RPG 8.6 Designed for burr-free squaring of thin-walled stainless steel tubes. Clean and secure working area with a clear view of the cutting head. Machine with rotating/removable bench stand. new Machine comes with: 1 Tube Squaring Machine RPG 4.5, RPG 4.5 S or RPG 8.6 1 Durable storage and shipping case 1 Tool holder (Code 790 038 320) with multifunctional tool (Code 790 038 314) 1 Tool set 1 Set of operating instructions and spare parts list RPG 4.5 S Application range RPG 4.5 RPG 4.5 (S) RPG 8.6 Tube OD [mm] 12.7-114.3 12.7-114.3 50.8-219.1 [inch] 0.5-4.5 0.5-4.5 2-8.6 Wall thickness max. [mm] 3.0 3.0 3.6 [inch] 0.118 0.118 0.142 Tube materials High-alloy steels, unalloyed and low-alloy steels and aluminum. Others on request. Technical data Electric drive with single-phase AC motor Dimensions (including motor) [mm] 460 x 260 x 230 610 x 380 x 270 500 x 350 x 350 [inch] 18.1 x 10.2 x 9.1 24 x 15 x 10.6 19.7 x 13.8 x 13.8 Power [W] 1100 1100 1100 Protection class [class] II II II Built-in electronic variable cutting speed [min -1 ] 8-52 8-52 7-18 Vibration level (EN 60745) [m/s²] < 2.5 < 2.5 < 2.5 Noise level at the workplace (EN 23741) [db (A)] Idle running approx. 83 Idle running approx. 83 Idle running approx. 83 Article Version Code Weight of machine Shipping weight RPG 4.5 230 V, 50/60 Hz EU 790 038 001 10.500 19.400 RPG 4.5 110 V, 50/60 Hz EU 790 038 003 10.500 19.400 RPG 4.5 120 V, 50/60 Hz US 790 038 002 10.500 19.400 RPG 4.5 S 230 V, 50/60 Hz EU 790 038 011 23.000 34.000 RPG 4.5 S 120 V, 50/60 Hz US 790 038 012 23.000 34.000 RPG 8.6 230 V, 50/60 Hz EU 790 039 001 20.500 32.000 RPG 8.6 110 V, 50/60 Hz EU 790 039 003 20.500 32.000 RPG 8.6 120 V, 50/60 Hz US 790 039 002 20.500 32.000 RPG 8.6 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 35

Tube Squaring Machines Accessories for RPG 4.5, RPG 8.6 Please check the outer diameter of the tubes before ordering the clamping shells. Clamping shells Extremely durable. The two-piece-design with click mechanism ensures accurate centering and quick clamping shell change without any tools. Further dimensions of clamping shells are available. Clamping shells for RPG 4.5 Machine Version Tube OD [mm] Tube OD [inch] Code RPG 4.5 Stainless steel 12.00 0.472 790 038 454 2.170 RPG 4.5 Stainless steel 12.70 0.500 790 038 438 2.177 RPG 4.5 Stainless steel 13.00 0.512 790 038 439 2.176 RPG 4.5 Stainless steel 13.50 0.531 790 038 440 2.175 RPG 4.5 Stainless steel 14.00 0.551 790 038 441 2.174 RPG 4.5 Stainless steel 16.00 0.630 790 038 442 2.168 RPG 4.5 Stainless steel 17.20 0.677 790 038 443 2.164 RPG 4.5 Stainless steel 18.00 0.709 790 038 444 2.161 RPG 4.5 Stainless steel 19.00 0.748 790 038 445 2.150 RPG 4.5 Stainless steel 19.05 0.750 790 038 446 2.157 RPG 4.5 Stainless steel 20.00 0.787 790 038 447 2.153 RPG 4.5 Stainless steel 21.30 0.839 790 038 448 2.100 RPG 4.5 Stainless steel 22.00 0.866 790 038 449 2.144 RPG 4.5 Stainless steel 22.22 0.875 790 038 050 2.195 RPG 4.5 Stainless steel 23.00 0.906 790 038 450 2.140 RPG 4.5 Stainless steel 24.00 0.945 790 038 451 2.133 RPG 4.5 Stainless steel 25.00 0.984 790 038 452 2.127 RPG 4.5 Stainless steel 25.25 0.994 790 038 049 2.180 RPG 4.5 Stainless steel 25.40 1.000 790 038 051 2.100 RPG 4.5 Stainless steel 26.90 1.059 790 038 400 2.090 RPG 4.5 Stainless steel 27.20 1.071 790 038 468 2.165 RPG 4.5 Stainless steel 28.00 1.102 790 038 401 2.110 RPG 4.5 Stainless steel 29.00 1.142 790 038 402 2.105 RPG 4.5 Stainless steel 30.00 1.181 790 038 403 2.095 RPG 4.5 Stainless steel 31.75 1.250 790 038 052 2.090 RPG 4.5 Stainless steel 31.80 1.252 790 038 404 2.080 RPG 4.5 Stainless steel 32.00 1.260 790 038 455 2.080 RPG 4.5 Stainless steel 33.00 1.299 790 038 465 2.120 RPG 4.5 Stainless steel 33.40 1.315 790 038 405 2.040 RPG 4.5 Stainless steel 33.70 1.327 790 038 406 2.060 RPG 4.5 Stainless steel 34.00 1.339 790 038 407 2.040 RPG 4.5 Stainless steel 35.00 1.378 790 038 408 2.050 RPG 4.5 Stainless steel 36.00 1.417 790 038 409 2.044 RPG 4.5 Stainless steel 38.00 1.496 790 038 410 2.025 RPG 4.5 Stainless steel 38.10 1.500 790 038 053 2.020 RPG 4.5 Stainless steel 40.00 1.575 790 038 411 2.000 RPG 4.5 Stainless steel 41.00 1.614 790 038 412 1.990 RPG 4.5 Stainless steel 42.00 1.654 790 038 413 1.976 RPG 4.5 Stainless steel 42.16 1.660 790 038 414 1.950 RPG 4.5 Stainless steel 42.40 1.669 790 038 415 1.965 RPG 4.5 Stainless steel 42.70 1.681 790 038 416 1.950 RPG 4.5 Stainless steel 44.45 1.750 790 038 417 1.955 RPG 4.5 Stainless steel 44.50 1.752 790 038 418 1.955 RPG 4.5 Stainless steel 45.00 1.772 790 038 419 1.948 RPG 4.5 Stainless steel 48.00 1.890 790 038 464 1.960 RPG 4.5 Stainless steel 48.26 1.900 790 038 420 1.880 RPG 4.5 Stainless steel 48.30 1.902 790 038 421 1.905 RPG 4.5 Stainless steel 48.60 1.913 790 038 422 1.875 RPG 4.5 Stainless steel 50.00 1.969 790 038 456 1.880 RPG 4.5 Stainless steel 50.80 2.000 790 038 054 1.895 RPG 4.5 Stainless steel 51.00 2.008 790 038 423 1.870 RPG 4.5 Stainless steel 52.00 2.047 790 038 424 1.850 Machine Version Tube OD [mm] Tube OD [inch] Code RPG 4.5 Stainless steel 53.00 2.087 790 038 425 1.835 RPG 4.5 Stainless steel 54.00 2.126 790 038 426 1.827 RPG 4.5 Stainless steel 57.00 2.244 790 038 457 1.780 RPG 4.5 Stainless steel 60.00 2.362 790 038 469 1.780 RPG 4.5 Stainless steel 60.30 2.375 790 038 427 1.700 RPG 4.5 Stainless steel 60.45 2.380 790 038 428 1.726 RPG 4.5 Stainless steel 60.50 2.382 790 038 429 1.695 RPG 4.5 Stainless steel 63.00 2.480 790 038 461 1.688 RPG 4.5 Stainless steel 63.50 2.500 790 038 055 1.670 RPG 4.5 Stainless steel 65.00 2.559 790 038 463 1.700 RPG 4.5 Stainless steel 70.00 2.756 790 038 430 1.545 RPG 4.5 Stainless steel 73.03 2.875 790 038 453 1.485 RPG 4.5 Stainless steel 73.15 2.880 790 038 431 1.482 RPG 4.5 Stainless steel 75.00 2.953 790 038 462 1.443 RPG 4.5 Stainless steel 76.10 2.996 790 038 432 1.420 RPG 4.5 Stainless steel 76.20 3.000 790 038 056 1.390 RPG 4.5 Stainless steel 76.30 3.004 790 038 433 1.390 RPG 4.5 Stainless steel 80.00 3.150 790 038 466 1.390 RPG 4.5 Stainless steel 85.00 3.346 790 038 434 1.220 RPG 4.5 Stainless steel 85.90 3.382 790 038 435 1.200 RPG 4.5 Stainless steel 88.90 3.500 790 038 057 1.130 RPG 4.5 Stainless steel 89.10 3.508 790 038 436 1.100 RPG 4.5 Stainless steel 90.00 3.543 790 038 467 1.150 RPG 4.5 Stainless steel 101.60 4.000 790 038 058 0.800 RPG 4.5 Stainless steel 104.00 4.094 790 038 437 0.740 RPG 4.5 Stainless steel 108.00 4.252 790 038 458 0.620 RPG 4.5 Stainless steel 114.30 4.500 790 038 059 0.435 RPG 8.6 Aluminum 50.80 2.000 790 039 260 3.800 RPG 8.6 Aluminum 57.00 2.244 790 039 265 4.000 RPG 8.6 Aluminum 76.20 3.000 790 039 261 4.200 RPG 8.6 Aluminum 88.90 3.500 790 039 264 4.000 RPG 8.6 Aluminum 101.60 4.000 790 039 252 3.800 RPG 8.6 Aluminum 108.00 4.252 790 039 266 4.850 RPG 8.6 Aluminum 114.30 4.500 790 039 256 3.500 RPG 8.6 Aluminum 127.05 5.002 790 039 262 3.420 RPG 8.6 Aluminum 133.00 5.236 790 039 267 4.600 RPG 8.6 Aluminum 139.70 5.500 790 039 259 3.100 RPG 8.6 Aluminum 141.30 5.563 790 039 257 2.900 RPG 8.6 Aluminum 152.40 6.000 790 039 253 2.700 RPG 8.6 Aluminum 159.00 6.260 790 039 268 4.200 RPG 8.6 Aluminum 168.30 6.625 790 039 254 2.300 RPG 8.6 Aluminum 193.70 7.626 790 039 269 3.500 RPG 8.6 Aluminum 197.00 7.756 790 039 263 1.530 RPG 8.6 Aluminum 203.20 8.000 790 039 258 3.500 RPG 8.6 Aluminum 219.10 8.625 790 039 255 0.600 RPG 8.6 Stainless steel 101.60 4.000 790 039 287 5.000 RPG 8.6 Stainless steel 114.30 4.500 790 039 280 4.700 RPG 8.6 Stainless steel 141.30 5.563 790 039 281 4.500 RPG 8.6 Stainless steel 152.40 6.000 790 039 283 4.400 RPG 8.6 Stainless steel 168.30 6.625 790 039 284 4.000 RPG 8.6 Stainless steel 203.20 8.000 790 039 286 3.240 RPG 8.6 Stainless steel 219.10 8.625 790 039 285 1.500 36 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Tube Squaring Machines Tool holder WH Fits multifunctional tool 790 038 314. Incl. Torx fixing screw. Beveling with the RPG 4.5 S is not recommended. Application range Possible application Beveling angle Squaring Beveling [ ] Tool holder WH15-I x Tool holder WH12-V-45 x 45 Tool holder WH12-V-35 x 35 Tool holder WH12-U-20 x 20 Tool holder WH Article Code Tool holder WH15-I 790 038 320 0.025 Tool holder WH12-V-45 790 038 280 0.044 Tool holder WH12-V-35 790 038 282 0.054 Tool holder WH12-U-20 790 038 326 0.031 Multifunctional tool MFW Two-sided tool bit with protective coating against tool wear. Usable for all machines of the RPG series. Article Quantity Code Multifunctional tool MFW-P-2 1 790 038 314 0.003 Multifunctional tool MFW-P-2 10 790 038 315 0.045 Multifunctional tool MFW E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 37

Boiler Tube Bevelers BRB 2 Full Auto The highest level of boiler pipe processing 38 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Boiler Tube Bevelers BRB 2 Full Auto Boiler Pipe Preparation Machine BRB Ideal for shortening heat exchanger pipes and for cutting pipes out of heat exchanger walls Starting of the working process, automatic feeding and automatic clamping by using one tip switch only Standard-compliant, precise and reproducible weld seam preparation Rapid processing, ideal for serial processing Handy, ergonomic and compact design, all control elements for operating the machine are integrated in it, no external control box or pedal required Continuous adjustment of the feed speed Integrated rapid feed sensing device Very robust length-adjustable end switch. Terminates the process of shortening exactly at the desired final size Integrated length stop for easier positioning of the machine in the pipe, protects the cutting edges Compressed-air motor with speed regulation and low-maintenance gearing with grease lubrication Optimized speed range, ideal for heat exchanger applications The exhaust air ring can be rotated, which allows the air flow to be kept away from the workpiece and user Integrated balancer device for safe, relaxed and fatigue-free working, also during longer working periods The perfect addition to Orbitalum's WIG pipe-in-sheet weld heads BRB 2 Full Auto new BRB 2 Full Auto The pneumatically-operated BRB 2 Full Auto pipe processing machine is particularly economical and ensures the highest levels of precision and quality when shortening and welding in of thousands of pipes on heat exchangers. The machine provides users the same precision and efficiency during maintenance and service defective pipes can be easily cut out of the pipe sheet. The integrated interchangeable tool retainer for processing with our new Tool Bit cutting system is suitable for exact squaring and beveling. This system is particularly economical through the use of up to four extremely inexpensive Tool Bits (Tool Bits available optionally, see. A tool retainer for working with the conventional tool combination (WH/MFW) continues to be available optionally. Machine comes with: 1 Boiler Pipe Preparation Machine BRB 2 Full Auto 1 Storage and shipping case 6 Clamping sets and 1 mandrel Ø 19.05 mm (0.75 inch) 1 Tool holder for Tool Bits (Tool Bits have to be ordered separately) 1 KSS-TOP lubricant spray pump (Code 790 060 226) 1 Tool set 1 Set of operating instructions and spare parts list Manufacturer s warranty can only be given when using a mobile air unit. We recommend the mobile air unit from Orbitalum Tools, Code 790 093 060. E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 39

Boiler Tube Bevelers BRB 2 Full Auto Overview of the clamping wedge sets: Clamping sets for interior pipe diameter Clamping range Mandrel Ø [mm] [inch] Code [mm] [inch] [mm] [inch] 19.1-23.0 0.75-0.91 790 086 390 22.0-26.0 0.87-1.02 790 086 391 25.0-29.0 0.98-1.14 790 086 392 28.0-32.0 1.10-1.26 790 086 393 31.0-35.0 1.22-1.38 790 086 394 19.1-47.0 0.75-1.85 19.05 0.750 34.0-38.0 1.34-1.50 790 086 395 37.0-41.0 1.46-1.61 790 086 396 40.0-44.0 1.57-1.73 790 086 397 43.0-47.0 1.69-1.85 790 086 398 new Application range BRB 2 Full Auto Pipe ID (Ø clamping range) [mm] 19.1-47.0 [inch] 0.75-1.85 Wall thickness [mm] 1.2-3.0 [inch] 0.047-0.118 Materials Unalloyed and low-alloy steels, high-alloy steels (high-grade steel, material no. 1.40. 1.45. in accordance with DIN 17 455 and DIN 17 456), aluminum. Others on request. Technical data Dimensions (l x w x h) [mm] 515 x 105 x 400 [inch] 20.3 x 4.1 x 15.7 Weight gross/net, approx. [] 21.6 / 12.1 [lbs] 47.6 / 26.7 Power (pneumatic power drive) [kw] 0.38 [hp] 0.51 Air consumption (at 6 bar) [m³/min] 0.7 Speed max. idling speed [min 1 ] 139 LAeq sound pressure level (EN 23741) [db (A)] approx. 83 (mid-range speed) Vibration level (EN 28662, part 1) [m/s²] > 2.5 BRB 2 Full Auto Article Version Code Weight of machine Shipping weight BRB 2 Full Auto Pneumatic 790 185 052 12.100 21.600 Suitable accessories: Tool Bits TB. Tool retainer for Tool Bits TB. Tool holder WH. Multifunctional tools MFW. Tool retainer for tool combinations WH/MFW. Combination possibilities of tool holder and multifunctional tools. Bevel cutter heads for BRB 2 (V-/Y-prep). Balancer spring. Mobile air unit DWE 10 and air hose with quick coupling. Cutting lubrication KSS-TOP. 40 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Boiler Tube Bevelers Powerful and robust boiler pipe preparation machine E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 41

Boiler Tube Bevelers Boiler Pipe Preparation Machines BRB BRB 2 Electric with clamping system "Standard" Handy and compact design Precise and reproducible weld preparation Fast application with the BRB Pneumatic/Auto by means of pneumatic clamping, ideal for continuous production e.g. boiler and heat exchanger applications High performance and lightweight High-performance coated tool bits with up to 4 cutting edges Quick clamping system for tools with easy adjustment Adjustable air outlet Easy to change tools Tools adaptable on all BRB machines Up to 3 tools can be used at the same time BRB 2, BRB 4 Powerful and robust Boiler Prep Machine. Counterboring and axial turning of pipes made from high-alloy steel (stainless steel), low-alloy and carbon steel with the unique tool system QTC. Designed for pipe end preparations and boiler pipe applications. The BRB machines are available in the following drive versions: BRB 2 Pneumatic with clamping system "Standard" Electric: 230 V, 50/60 Hz EU or 120 V, 50/60 Hz EU/US Electric drive with single-phase AC motor, protection class II (double insulated), Built-in electronic variable cutting speed Pneumatic: Pneumatic power drive. Manufacturer s warranty can only be given when using a mobile air unit. We recommend the mobile air unit from Orbitalum Tools, Code 790 093 060. Pneumatic/Auto: Pneumatic multi-disc motor with additional pneumatic clamping system. Time is of the essence when installing or repairing boiler pipes, the pneumatic clamping system greatly reduces the time to both clamp and release the machine, improving efficiency. The machine centers itself on the inside diameter of the pipe and then clamps automatically by using the toggle switch, likewise the toggle switch releases the clamping after the machining operation. This is why the BRB with automatic pneumatic clamping is ideal for continuous production e.g. boiler and heat exchanger applications. BRB 2 Pneumatic/Auto with clamping system "Standard" Technical data BRB 2 Electric BRB 2 Pneumatic BRB 2 Pneu/Auto BRB 4 Electric BRB 4 Pneumatic BRB 4 Pneu/Auto Power 0.5 kw 0.38 kw 0.38 kw 1.5 kw 1.0 kw 1.0 kw Speed 18-118 rpm 0-120 rpm 0-120 rpm 12-37 rpm 0-110 rpm 0-110 rpm Air supply requirement (at 6 bar) 0.7 m 3 /min 0.7 m 3 /min 1.0 m 3 /min 1.0 m 3 /min Noise level 76 db (A) 82 db (A) 82 db (A) 82 db (A) 84 db (A) 84 db (A) LAeq 1 m (EN 23741), approx. Vibration level (EN 28662, part 1) 2.5 m/s² 2.5 m/s² 2.5 m/s² 2.5 m/s² 2.5 m/s² 2.5 m/s² The various clamping systems: The "NC" clamping system with its clamping wedges anchored in the mandrel is ideal for applications in which foreign objects may not enter the pipe inside or a tank. The "NC" clamping system provides additional certainty in particular at vertical applications. The "Standard" clamping system has proven itself in many years of use through its stability and reliability. You can continue to use this system. Clamping system "NC" 42 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Boiler Tube Bevelers Machine comes with: 1 Boiler Pipe Preparation Machine BRB 2 or BRB 4 1 Durable storage and shipping case Tool retainer, clamping setsand mandrels (depending on the machine kit) 1 KSS-TOP lubricant spray pump (Code 790 060 226) 1 Tool set 1 Set of operating instructions and spare parts list Application range BRB 2 Kit 1 BRB 2 Kit 2 BRB 4 Kit 3 Clamping system Standard NC NC NC Pipe ID (Ø clamping range) BRB 4 Kit 5 [mm] 12.75-25.5 19.1-47.0 35.0-108.0 19.1-108.0 [inch] 0.502-1.004 0.752-1.850 1.378-4.252 0.752-4.252 Tool retainer Ø [mm] 50.0 / 12.75 50.0 / 16.0 120.0 / 27.0 68.0 / 19.0 68.0 / 27.0 120.0 / 27.0 [inch] 1.969 / 0.502 1.969-0.630 4.724 / 1.063 2.677 / 0.748 2.677 / 1.063 4.724 / 1.063 Clamping wedges [Sets] 6 6 18 (8+10) 24 (14+10) Mandrel Ø [mm] 12.75 19.05 34.5 19.05 34.5 [inch] 0.502 0.750 1.358 0.750 1.358 Pipe OD [mm] 16.75-41.5 23.0-62.0 114.3 114.3 [inch] 0.659-1.634 0.906-2.441 4.50 4.50 Wall thickness* min. - max. [mm] 2-8 2-8 2-15 2-15 [inch] 0.079-0.315 0.079-0.315 0.079-0.590 0.079-0.590 BRB 2 and BRB 4 Electric with clamping system "NC" * Depending on pipe material and dimension Article Version Clamping system Code Weight of machine Shipping weight BRB 2 EL, Kit 1 230 V, 50/60 Hz EU Standard 790 085 011 4.100 12.200 BRB 2 EL, Kit 1 120 V, 50/60 Hz EU/US Standard 790 085 021 4.100 12.200 BRB 2 DL, Kit 1 Pneumatic Standard 790 085 007 3.800 11.900 BRB 2 DL/Auto, Kit 1 Pneumatic/Auto Standard 790 085 041 4.600 13.300 BRB 2 EL, Kit 2 230 V, 50/60 Hz EU NC 790 185 012 4.900 13.000 BRB 2 EL, Kit 2 120 V, 50/60 Hz EU/US NC 790 185 022 4.900 13.000 BRB 2 DL, Kit 2 Pneumatic NC 790 185 002 4.400 12.500 BRB 2 DL/Auto, Kit 2 Pneumatic/Auto NC 790 185 042 5.100 13.800 BRB 4 EL, Kit 3 230 V, 50/60 Hz EU NC 790 186 013 23.300 BRB 4 EL, Kit 3 120 V, 50/60 Hz EU/US NC 790 186 023 23.300 BRB 4 DL, Kit 3 Pneumatic NC 790 186 003 22.200 BRB 4 DL/Auto, Kit 3 Pneumatic/Auto NC 790 186 033 23.400 BRB 4 EL, Kit 5 230 V, 50/60 Hz EU NC 790 186 015 11.400 26.400 BRB 4 EL, Kit 5 120 V, 50/60 Hz EU/US NC 790 186 025 11.400 26.000 BRB 4 DL, Kit 5 Pneumatic NC 790 186 005 25.500 BRB 4 DL/Auto, Kit 5 Pneumatic/Auto NC 790 186 035 26.000 BRB 2 and BRB 4 Pneumatic with clamping system "NC" Suitable accessories: Tool holder WH. Multifunctional tools MFW. Combination possibilities of tool holder and multifunctional tools. Tool Bits TB. Tool retainer for Tool Bits TB. Bevel cutter heads for BRB 2 (V-/Y-prep). Bevel cutter heads for BRB 4 (V-prep). Balancer spring. Hoist bracket. Mobile air unit DWE 10 and air hose with quick coupling. Cutting lubrication KSS-TOP. BRB 2 and BRB 4 Pneumatic/Auto with clamping system "NC" E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 43

Pipe End Prep Machines The powerful pipe end preparation solution 44 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Pipe End Prep Machines Pipe End Preparation Machines Compact design for precise and reproducible weld prep profiles Quick-Tool-Change QTC Square and burr-free High-performance coated tool bit with two or four cutting edges Sturdy construction Tools adaptable on all REB machines Optimized performance and ergonomic drive system Portable with an integral carrying handle REB 6, REB 14 The powerful pipe end preparation solution. Counterboring and axial turning of pipes made from high-alloy steel (stainless steel), low-alloy and carbon steel with the unique tool system QTC. Up to 4 tools can be used at the same time. REB 6 Electric Machine comes with: 1 Pipe End Preparation Machine REB 6 or REB 14 1 Transportation case 1 Clamping chuck 5 Clamping sets, each with 3 clamping wedges (REB 6) or 6 Clamping sets, each with 3 clamping wedges (REB 14) 1 Tool set 1 KSS-TOP lubricant spray pump (Code 790 060 226) 1 Set of operating instructions and spare parts list Manufacturer s warranty can only be given when using a mobile air unit. We recommend the mobile air unit from Orbitalum Tools, Code 790 093 060. Application range* REB 6 Pneumatic Pipe ID Wall thickness Pipe OD Pipe materials Technical data Dimensions [mm] [inch] [mm] [inch] [mm] [inch] [mm] [inch] 49-159 1.93-6.26 3-22 0.12-0.87 56-168 2.20-6.61 REB 6 Electric 49-159 1.93-6.26 3-22 0.12-0.87 56-168 2.20-6.61 REB 14 Pneumatic 92-320 3.62-12.60 4-30 0.16-1.18 100-355.6 3.94-14.00 REB 14 Electric 92-320 3.62-12.60 4-22 0.16-0.87 100-355.6 3.94-14.00 Unalloyed and low-alloyed steels, high-alloyed steels (stainless steel), aluminum 560 x 260 x 400 22 x 10.2 x 15.8 640 x 260 x 420 625 x 375 x 490 700 x 375 x 510 25.2 x 10.2 x 16.5 24.6 x 14.8 x 19.3 27.6 x 14.8 x 20 Power [kw] 1.8 1.2 1.8 1.2 Air consumption (at 6 bar) [m 3 / 2.0 2.0 min] Speed [min -1 ] 0-26 10-32 0-13 5-16 Vibration level (EN 28662, Part 1) [m/s 2 ] < 2.5 < 2.5 < 2.5 < 2.5 Noise level in the workplace [db (A)] at idle-speed: approx. 75 (average speed range) under load: approx. 77 * It is possible to extend the dimensions by using the optional clamping wedges (accessories). Article Version Code Weight of machine Shipping weight REB 6 Pneumatic 790 093 001 32.000 52.000 REB 6 230 V, 50/60 Hz EU 790 093 002 35.000 55.000 REB 6 120 V, 50/60 Hz US 790 093 005 35.000 55.000 REB 14 Pneumatic 790 094 001 61.000 90.000 REB 14 230 V, 50/60 Hz EU 790 094 002 64.000 93.000 REB 14 120 V, 50/60 Hz US 790 094 005 64.000 93.000 Accessories REB 14 Pneumatic Tool holder WH. Multifunctional tools MFW. Combination possibilities of tool holder and multifunctional tools. Mobile air unit DWE 10 and air hose with quick coupling. Cutting lubrication KSS-TOP. Elbow clamping system. Optional clamping wedges. Plastic (POM) clamping shell segments. ID tracking for REB 14. E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 45

Pipe End Prep Machines Accessories for BRB and REB machines Tool holder WH With Torx screw. Combination possibilities of tool holder and multifunctional tools. Article Weld prep profile Applicable with Height [mm] Height [inch] Code WH5-I I BRB 2 / REB 10 0.394 790 085 230 0.005 WH4-I* I BRB 2 10 0.394 790 085 234 0.033 WH12-I I BRB 4 20 0.787 790 086 210 0.035 WH15-I I BRB 4 / REB 20 0.787 790 092 202 0.100 WH15-I I BRB 4 / REB 27 1.063 790 092 204 0.100 WH15-I** I BRB 4 / REB 16.5-23 0.650-0.906 790 093 410 0.247 WH30-I I REB 20 0.787 790 093 202 0.166 WH30-I I REB 27 1.063 790 093 204 0.235 WH5-V-30 V/Y BRB 2 790 085 236 0.015 WH12-V-30 V/Y BRB 4 790 086 214 0.040 WH12-V-37.5 V/Y BRB 4 790 086 216 0.115 WH12-V-45 V/Y BRB 4 790 086 474 0.054 WH12-V-80 V/Y BRB 4 / REB 790 093 462 0.048 WH12-V-35 V/Y BRB 4 790 086 272 0.100 WH15-V-30 V/Y BRB 4 / REB 790 092 210 0.100 WH15-V-37.5 V/Y BRB 4 / REB 790 092 216 0.100 WH15-V-45 V/Y BRB 4 / REB 790 092 218 0.144 WH15-V-60 V/Y BRB 4 / REB 790 092 212 0.100 WH30-V-15 V/Y REB 790 093 468 0.200 WH30-V-25 V/Y REB 790 093 476 0.206 WH30-V-30 V/Y REB 790 093 210 0.192 WH30-V-32.5 V/Y REB 790 093 424 0.234 WH30-V-37.5 V/Y REB 790 093 216 0.199 WH30-V-40 V/Y REB 790 093 510 0.237 WH30-V-45 V/Y REB 790 093 404 0.204 WH5-U-20 U BRB 2 790 085 228 0.014 WH12-U-10 U BRB 4 790 086 208 0.044 WH12-U-15 U BRB 4 / REB 790 086 213 0.044 WH12-U-20 U BRB 4 790 086 224 0.047 WH12-U-20 / large clamping surface U BRB 4 / REB 790 086 476 0.091 WH12-U-25 U BRB 4 790 086 212 0.051 WH30-U-5 U REB 790 093 509 0.210 WH30-U-7 U BRB 4 / REB 790 093 408 0.206 WH30-U-10 U BRB 4 / REB 790 093 220 0.174 WH30-U-14 U REB 790 093 474 0.174 WH30-U-20 U BRB 4 / REB 790 093 218 0.184 WH30-U-25 U REB 790 093 478 0.165 WH5-ID-14 / 10 mm (0.394") deep ID BRB 2 790 085 232 0.017 WH5-ID-14 ID BRB 4 / REB 790 093 406 0.139 WH5-ID-45 ID BRB 4 790 086 218 0.160 WH10-ID-5 / short ID BRB 4 / REB 790 093 398 0.135 WH10-ID-5 / long ID BRB 4 / REB 790 093 400 0.152 WH10-ID-14 ID BRB 4 / REB 790 093 402 0.170 WH10-ID-14 / 30 mm (1.181") deep ID BRB 4 / REB 790 093 466 0.155 WH12-ID-10 / from ID 50 (1.969") ID BRB 4 / REB 790 086 280 0.060 WH10-ID-30 ID BRB 4 / REB 790 093 493 0.042 WH10-ID-45 ID REB 790 093 494 0.107 WH10-ID-80 *** ID BRB 2 / BRB 4 790 086 275 0.075 WH5-ID-45 *** ID BRB 2 / BRB 4 / REB 790 086 218 0.155 * Special tool holder for facing pipes in pipe plates. ** Adjustable tool holder WH for I-prep. Comes with adjustable tool holder, multifunctional tool MFW15-V/I-4 (Code 790 093 037), Torx screws and adjusting plates. *** Special tool holder WH for cutting tubes from tube sheets. WH12-I WH15-I** WH15-V-30 WH12-U-15 WH5-ID-14 46 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Pipe End Prep Machines Multifunctional tool MFW Economy Two- or four-sided tool bits without coating. For low-alloy steel, carbon steel, aluminum and cast iron pipes. Article Version For wall thickness Applicable with tool holder / [mm] [inch] for weld prep profile Applicable with Code MFW15-V/I-4 Economy 2-15 0.079-0.591 V, Y, I BRB 4 / REB 790 093 047 0.033 MFW30-V/I-4 Economy 2-30 0.079-1.181 V, Y, I REB 790 093 043 0.055 Multifunctional tool MFW High-Performance Two- and/or four-sided tool bits with high-performance protective coating against tool wear. For high-alloy steel (stainless steel) low-alloy steel, carbon steel, aluminum and cast iron pipes. Article Version For wall thickness Applicable with tool holder / [mm] [inch] for weld prep profile Applicable with Code MFW5-V / I-2 High-Performance max. 6 max. 0.236 WH5-I and WH5-U-20 BRB 2 790 085 030 0.155 MFW30-V / I-4 High-Performance 2-30 0.079-1.181 V, Y, I REB 790 093 033 0.055 MFW30-U-4-R5 High-Performance 2-30 0.079-1.181 I-, V-, Y-, U radius 5 mm REB 790 093 034 0.055 MFW30-U-4-R2 High-Performance 2-30 0.079-1.181 I-, V-, Y-, U radius 2 mm REB 790 093 035 0.060 MFW30-U-4-R1 High-Performance 2-30 0.079-1.181 I-, V-, Y-, U radius 1 mm REB 790 093 036 0.060 MFW30-U-4-R0.4 High-Performance 2-30 0.079-1.181 I-, V-, Y-, U radius 0.4 mm REB 790 093 042 0.060 MFW4-I-2 High-Performance max. 4 max. 0.157 WH4-I-2 (special holder) BRB 2 790 085 031 0.002 MFW15-V / I-4 High-Performance 2-15 0.079-0.591 V, Y, I BRB 4 / REB 790 093 037 0.055 MFW12-V / I-2 High-Performance 2-12 0.079-0.472 V, Y, I, U radius 1.2 BRB 4 790 086 060 0.025 MFW12-U-2-R2 High-Performance 2-12 0.079-0.472 V, Y, I, U radius 2.0 BRB 4 790 086 064 0.025 MFW5-ID-2-R0.4 (14 ) High-Performance WH5-ID-14 radius 0.4 BRB 4 / REB 790 093 039 0.003 MFW5-ID-2-R0.4 (45 ) High-Performance WH5-ID-45 radius 0.4 BRB 4 / REB 790 086 061 0.002 MFW10-ID-2-R0.4 (80 ) High-Performance WH10-ID-80 radius 0.4 BRB 4 790 086 062 0.002 MFW10-ID-2-R0.8 (14 ) High-Performance WH10-ID-14 radius 0.8 mm REB 790 093 038 0.002 MFW10-ID-2-R3.0 (14 ) High-Performance WH10-ID-14 radius 3.0 mm REB 790 093 041 0.004 MFW15-V/I-4 "Economy" MFW30-U-4-R1 MFW15-V/I-4 MFW5-ID-2-R0.4 (14 ) Tool Bits TB Can only be used with the BRB 2 and BRB 2 Full Auto. With a width of only 4.5 mm (0.177 inch) the tool bits are ideal for shortening heat exchanger pipes. This allows even heat exchangers with minimal pipe spacing to be processed without problems. The opposing tool holders or cutting edges furthermore ensure improved force transmission. The corresponding tool retainer for Tool Bits is already included in the scope of delivery at the BRB 2 Full Auto. At the BRB 2 it has to be ordered separately (see below). Article Weld prep profile Applicable with Width [mm] Width [inch] Prep angle [ ] TB4.5 I I BRB 2 / BRB 2 Full Auto 4.5 0.177 790 085 500 0.012 TB4.5 V 30 V BRB 2 / BRB 2 Full Auto 4.5 0.177 30 790 085 501 0.014 TB4.5 V 37.5 V BRB 2 / BRB 2 Full Auto 4.5 0.177 37.5 790 085 502 0.015 TB4.5 V 45 V BRB 2 / BRB 2 Full Auto 4.5 0.177 45 790 085 503 0.015 TB6 REMOVE 45 BRB 2 / BRB 2 Full Auto 6.0 0.236 45 790 085 504 0.012 Code E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 47

Pipe End Prep Machines Tool holder for Tool Bits TB Already included in the scope of delivery of the BRB 2 Full Auto. This tool retainer is available separately for the BRB 2. Tool holder for Tool Bits TB Depending on the application (for example the processing of heat exchangers) the use of tool bits (see above) as well as the corresponding tool retainer is required. This retainer can be mounted on the BRB 2 and BRB 2 Full Auto in just a few steps. Article Code Tool retainer for Tool Bits 790 085 510 0.235 Tool holder for tool combinations WH/MFW Already included in the scope of delivery of the BRB 2. This tool retainer is available separately for the BRB 2 Full Auto. Tool holder for tool combinations WH/MFW Depending on the application, the use of conventional tool holders WH and multifunctional tools MFW as well as the associated tool retainer is required. This holder can be mounted on the BRB 2 and BRB 2 Full Auto in just a few steps. Advantages: Only one multifunctional tool required for different types of processing (beveling, squaring), different pipe wall thickness and different pipe materials High-performance coated tool bits with up to 4 cutting edges Up to 3 tools can be used simultaneously Article Code Tool retainer for tool combinations WH/MFW 790 085 261 0.300 Balancer spring For load-free hanging of BRB machines with a balancer. Ideal for series machining. Using a balancer enables optimal machining results from relaxed and fatigue-free work with longer work duration, and at the same time ensures more safety for the user (machine is safeguarded from falling). Balancer spring Article Code Balancer spring 832 030 002 3.800 Hoist bracket Designed for use with a hoist. BRB machines which have been manufactured up to October 2009 can be retrofitted with this hoist bracket; all new models are already equipped with the hoist bracket. Hoist bracket Article Code Hoist bracket for BRB 4 790 086 310 0.270 Hoist bracket for BRB 2 790 085 310 0.185 48 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Pipe End Prep Machines Bevel cutter head for BRB 2 (V-/Y-prep) Optimized work, smoother and steadier cutting. Including adjustable tool holder. The bevel cutter heads can be replaced like a tool mounting plate. They are available for several prep angles. The bevel cutter heads can be adapted to all machines (even older models). Comes with: 3 multifunctional tools (MFW-12-V/I-2, Code 790 086 060) 2 tool bits (Tool Bit R4.5-I, Code 790 085 390) 2 torx screws 6 threaded pins 3 fastening screws each, M5x16 Bevel cutter head for BRB 2 Article Application range Code Kit 1 (ID min. OD max.) Kit 2 (ID min. OD max.) [mm] [inch] [mm] [inch] Bevel cutter head 30 16-46 0.630-1.810 790 085 380 Bevel cutter head 37.5 16-36 0.630-1.420 790 085 381 0.316 Bevel cutter head 45 16-33 0.630-1.300 790 085 382 0.330 Bevel cutter head 30 19-43 0.750-1.690 790 085 383 0.360 Bevel cutter head 37.5 19-39 0.750-1.540 790 085 384 Bevel cutter head 45 19-36 0.750-1.420 790 085 385 0.345 Bevel cutter head for BRB 4 (V-prep) The bevel cutter heads with 3 cutting edges provide considerable advantages for heavy chip removal, e.g. for welded material. The bevel cutter heads can be replaced like a tool mounting plate. They are available for various prep angles and can be adapted to all machines (even older models). Comes with: 3 multifunctional tools: MFW-12-V/I-2, Code 790 086 060 MFW-P-2, Code 790 038 314 on request 3 Torx screws 3 fastening screws M6x16 Bevel cutter head for BRB 4 Article Application range Pipe wall Code thickness max. Bevel cutter head 30 Bevel cutter head 45 ID 36 mm to OD 78 mm (1.417-3.071 inch) in 3 steps of 5 mm (0.197 inch) distance ID 45 mm to OD 73 mm (1.772-2.874 inch) in 2 steps of 5 mm (0.197 inch) distance [mm] [inch] 10 0.394 790 086 500 0.465 10 0.394 790 086 459 0.515 Adjustable spacer For BRB machines. The adjustable spacer ensures a constant and repeatable depth machining of boiler pipes, etc. Article Code Adjustable spacer for BRB 2 790 085 055 1.285 Adjustable spacer E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 49

Pipe End Prep Machines Mobile air unit DWE 10 Lubricator and air filter adjustable pressure range 0-10 bar. Flow max. 2.6 m 3 /min (91.8 cfm). Air inlet side: ½ clutch coupling (DIN 3481). Air outlet side: ½ quick coupling. Suitable for air hose 790 093 061. Article Code Mobile air unit DWE 10 790 093 060 4.200 Mobile air unit DWE 10 Air hose with quick coupling To connect the REB or BRB machine with the mobile air unit DWE 10. Length: 4 m (157.5 inch). ID: 19.1 mm (0.752 inch). Air inlet side: ½ quick coupling. Air outlet side: 90 angle screw with ½ quick coupling and a nipple to screw into the speed regulation handle on REB or BRB. Air hose with quick coupling Article Code Air hose with quick coupling 790 093 061 2.000 Cutting lubrication KSS-TOP The water soluble, fully synthetic cooling fluid extends the tool life of the tool bits. Contains no hazardous substances (no labeling requirements according to GefStoffV1) and is well corrosion resistant. Developed conforming to drinking water requirements according to DVGW work sheet W521 (thread cutting compounds for drinking water installations) and basically complies with these specifications. Is biologically degradable (OECD 302 B). Cutting lubrication KSS-TOP Article Version Code Cutting lubrication KSS-TOP Pump sprayer with 500 ml 790 060 226 0.630 Cutting lubrication KSS-TOP refill canister Canister with 10 l 790 060 227 11.000 Elbow clamping system For preparing elbows with the REB 6 with an ID of 75-157 mm (2.95-6.18 inch). Comes with: 1 Durable storage and shipping case 1 Mandrel with clamping mechanism for elbows 1 Straightening tool 8 Sets with 3 pins for dimension range 75-157 mm (2.95-6.18 inch). Elbow clamping system Article Code Elbow clamping system for REB 6 complete 790 093 015 9.900 Optional clamping wedges To extend the dimension of the REB standard machines. Clamping wedges optional Article Applicable with Pipe ID [mm] Pipe ID [inch] Clamping wedges REB 6 155-166 6.102-6.535 790 093 295 1.300 Clamping wedges REB 14 320-339 12.598-13.346 790 094 189 3.600 Clamping wedges REB 14 331-350 13.031-13.780 790 094 190 3.850 Code 50 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Pipe End Prep Machines Plastic (POM) clamping shell segments Customized plastic (POM) clamping shell segments for REB 6 and REB 14 for thin-walled pipes. Deformation-free clamping system. These clamping shell segments are especially manufactured for an individual ID of a pipe and can be utilized only for this diameter. Please specify the exact pipe ID with your order. Comes with: 6 Cylinder head screws 3 Clamping shells 3 Plastic (POM) clamping shell segments Plastic (POM) clamping shell segments Other dimensions on request. Article Applicable with Pipe ID [mm] Pipe ID [inch] Plastic clamping shell segment REB 6 108.2-110.1 4.260-4.335 790 093 297 1.600 Plastic clamping shell segment REB 6 147.0-149.0 5.787-5.866 790 093 298 1.905 Plastic clamping shell segment REB 14 160.0 6.299 790 094 203 3.700 Plastic clamping shell segment REB 14 161.5-162.7 6.358-6.406 790 094 202 3.800 Plastic clamping shell segment REB 14 211.6-213.5 8.331-8.401 790 094 206 5.600 Plastic clamping shell segment REB 14 227.58 8.960 790 094 198 5.880 Plastic clamping shell segment REB 14 250.0 9.843 790 094 208 5.600 Plastic clamping shell segment REB 14 264.7-266.2 10.421-10.480 790 094 210 5.600 Plastic clamping shell segment REB 14 314.7-315.9 12.390-12.437 790 094 222 4.100 Plastic clamping shell segment REB 14 342.9 13.500 790 094 226 4.800 Plastic clamping shell segment REB 14 347.7 13.689 790 094 224 4.750 Code ID-Tracking for REB 14 The REB ID tracking can be used to prepare thin-walled, large-scale pipes for welding, where precise pipe end preparation and an exact base height are required. The module measures the pipe ID. The force of the spring on the inside diameter ensures that the roller tracks any irregularities of the pipe, producing a weld prep exactly in accordance with the ID. Thus maintaining a perfect weld prep. All weld preparations such as V-, Y- and U-preps can be realized with the ID tracking module. Comes with: ID tracking module Mount for plane Assembly instructions ID-Tracking Application range [mm] [inch] Pipe ID 150-320 5.910-12.600 Wall thickness max. 15 0.591 Article Code ID-Tracking for REB 14 790 094 013 5.750 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 51

Tungsten Grinder ESG Plus One machine complete electrode preparation 52 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Tungsten Grinder ESG Plus Tungsten Grinder Repeatable points every time due to preset grinding angles Easy and fast to use Optimum preparation for orbital and manual welding Longitudinal grinding for optimum arc ignition and excellent arc stability Guarantees longer tool life and ease of ignition of the tungsten electrode Specially designed for one-off jobs on site Compact design, optimum resilience and perfect reproducibility Solid, functional design Precise orbital grinding Grinding angles 15 / 18 / 22.5 / 30 or 15 / 30 / 45 / 60 Facility for easy trimming of the electrodes (optional) External dust extractor can be easily adapted Short preparation times with high grinding performance No adjustment needs to be done before operation ESG Plus, ESG Plus 2 This ESG Plus is the perfect hand-held grinder for cutting, grinding and planing electrodes which are used in WIG/TIG welding machines. Consider country-specific regulations, standards and guidelines when using tungsten electrodes with thorium. ESG Plus ESG Plus 2 : The first portable tungsten grinder with two different grinding wheels. This allows the electrode to be pre-ground with the coarse diamond wheel then finished with the fine diamond wheel. Machine comes with: 1 Tungsten Grinder ESG Plus or ESG Plus 2 1 Durable storage and shipping case ESG Plus: 1 Diamond grinding wheel (medium, Code 790 052 488) ESG Plus 2 : 1 Diamond grinding wheel (coarse, Code 790 052 550) and 1 diamond grinding wheel (fine, Code 790 052 487) 1 Tool to replace the grinding wheel 1 Set of operating instructions and spare parts list Application range ESG Plus, ESG Plus 2 Electrode Ø 1.0 / 1.6 / 2.0 / 2.4 / 3.2 / 4.0 mm 0.040 / 1/16 / 0.080 / 3/32 / 1/8 / 5/32 inch Grinding angles 15 / 18 / 22.5 / 30 or 15 / 30 / 45 / 60 Technical data Electric drive with single-phase AC motor Dimensions (with drive) Ø 65 x 350 mm / 2.56 x 13.78 inch Power 500 W Power-on time 100 % Rotary speed 30,000 rpm Main supply cable (length) 3 m / 118.1 inch Vibration level in accordance with 28662, part 1 < 2.5 m/s 2 Noise level at the workplace Idle running approx. 83 db (A) ESG Plus 2 Article Version Grinding angles [ ] Code Weight of machine Shipping weight ESG Plus 230 V, 50/60 Hz EU 15 / 18 / 22.5 / 30 790 052 485 1.430 3.560 ESG Plus 230 V, 50/60 Hz EU 15 / 30 / 45 / 60 790 052 545 1.430 3.560 ESG Plus 2 230 V, 50/60 Hz EU 15 / 18 / 22.5 / 30 790 052 585 1.520 3.825 ESG Plus 2 230 V, 50/60 Hz EU 15 / 30 / 45 / 60 790 052 546 1.520 3.825 ESG Plus 110 V, 50/60 Hz EU/US 15 / 18 / 22.5 / 30 790 052 486 1.560 3.570 ESG Plus 110 V, 50/60 Hz EU/US 15 / 30 / 45 / 60 790 052 645 1.560 3.570 ESG Plus 2 110 V, 50/60 Hz EU/US 15 / 18 / 22.5 / 30 790 052 586 1.520 3.825 ESG Plus 2 110 V, 50/60 Hz EU/US 15 / 30 / 45 / 60 790 052 646 1.520 3.825 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 53

Accessories for Workshop & Site Optional benches and tools for improved productivity 54 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

Accessories for Workshop & Site Work benches, tool box, pipe vices, and deburring tool Work benches Dimensions Work bench, small Work bench, large Collapsible work bench Dimensions (l x w x h) 120 x 75 x 85 cm 150 x 100 x 85 cm 100 x 70 x 85 cm Work bench, small Article Code Work bench, small, removable, with 1 tool box support 790 052 001 655.00 Work bench, large*, removable, with 2 tool box supports 790 052 004 855.00 Collapsible work bench, load capacity: 650 /1433 lbs 790 052 030 214.00 * while stock last. Tool box For mounting under the work benches Code 790 052 001 and 790 052 004. Collapsible work bench Dimensions Outside dimensions Tool box 100 x 40 x 65 cm / 39.37 x 15.75 x 25.59 inch Article Code Tool box 790 052 101 50.000 Tool box Pipe vices Application range Chain pipe vice Chain pipe vice with extension roller chain Bench vice Pipe OD up to 165 mm / 6.496 inch up to 230 mm / 9.055 inch 20-250 mm / 0.8-9.8 inch Article Code Chain pipe vice, complete with pipe support 790 052 201 6.200 Extension roller chain 790 052 859 0.870 Bench vice for plastic and stainless steel pipes 790 052 231 5.500 Spare belt (930 x 28 mm / 36.6 x 1.1 inch) for bench vice 790 052 247 0.100 Chain pipe vice Deburring tool For inner and outer deburring of stainless steel, mild steel, aluminum, non-ferrous metal and plastic tubes and pipes. Application range Pipe OD max. Pipe ID max. Deburring tool 54 mm / 2.126 inch 10 mm / 0.394 inch Bench vice for plastic and stainless steel pipes Article Code Deburring tool 790 052 052 0.455 Deburring tool E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com 55

Rental & Training Factory Rentals + Consumables E.H. Wachs offers short and long term rentals on a wide selection of Orbitalum Cutting + Welding products, which can be a highly cost effective alternative to purchasing. Call us today and we ll help match the right Orbitalum equipment to your specific project, and often we can ship a machine to you the same day. Factory rentals are a great option for short term projects, or to support a quick turnaround with additional equipment. Factory rentals eliminate the need for a large capital outlay, and guarantees you ll always be using the latest technology for maximum productivity. Individually inspected and test before shipment, Orbitalum factory rentals arrive configured for your applications. As part of our commitment to our customers Orbitalum factory rentals are priced competitively with outside parties, and in many cases at rates below the industry norm. Factory rentals and OEM consumables are now available for immediate shipment at many of our Sales and Service Centers, for quicker delivery and better support. No matter if it s a GF series saw or RPG facer, many of our rental customers find our machines so powerfully productive they choose to purchase one. So Rent with the Best. Rent with Orbitalum. Contact Us for Additional Information (800) 323-8185 or sales@ehwachs.com Factory Support + Training Owning or renting the best equipment is sometimes not enough - if you don t know how to operate them, even the best tools are of limited use. With Orbitalum it s reassuring to know that if you have questions or need technical support with our products, we re here to back you up with factory trained customer service and technical representatives. This support comes included with every machine purchase or rental. Often times a quick phone call to us can get you up and running in just a few minutes. We also offer, at our location or yours, training on our advanced cutting and orbital welding equipment, tailored to your exact application and your particular skill level. Your instructors are not just academics all of them have real world experience and have benefitted from advanced instruction in Singen, Germany. Visit us online at ehwachs. com or contact your local Wachs or Orbitalum representative for additional details. RENTAL BENEFITS No Large Capital Outlays No Storage or Repair Expenses Minimizes Down Time Latest Technology Maximizes Productivity TRAINING BENEFITS Orbitalum Factory-Trained Instructors Learn Safe, Proper Operation Train at our Location or Yours Courses for New Grads or Seasoned Professionals 56 E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 T:+1.847.537.8800 F:+1.847.520.1147 sales@ehwachs.com ehwachs.com

ITW Partners Miller Electric Mfg. Co., headquartered in Appleton, Wisconsin is a leading worldwide manufacturer of Miller arc welding machines MillerWelds.com Hobart Brothers manufactures premium welding filler metals, including stick electrodes and solid and tubular (flux cored and metal cored) wires. HobartBrothers.com Pipe Welding Technology (PWT) is a manufacturer and supplier of equipment and tools for automatic welding in outdoor applications. pwtsrl.com ITW Insulation Systems is a leading manufacturer of high-performance mechanical insulation, vapor retarder film and metal jacketing for a wide range of industrial applications. itwinsulation.com Magnaflux is a global system solution manufacturer of non-destructive testing chemicals, equipment, and accessories. magnaflux.com Our ITW Partners When you partner with us you re not only partnering with the industry leader in portable weld preparation machine tools and orbital welding systems, you re partnering with ITW, the industry leader in advanced welding technologies. ITW has a market leading portfolio of best in class brands offering reliable and responsible products for the markets we serve. When reliability matters... We re there. Wachs Subsea specializes in Subsea Cutting Solutions with products to support nearshore and offshore maintenance and repair in the oil & gas industry. wachssubsea.com Forging the Tools for Excellence

You YouTube.com/orbitalum TM Certified according to ISO 9001:2008 Corporate Locations Sales Locations Contact your local ITW Orbital Cutting & Welding representative for additional information or to request a product demonstration. UNITED STATES ITW-OCW US Headquarters E.H. Wachs 600 Knightsbridge Parkway Lincolnshire, Illinois 60069 USA T: +1.847.537.8800 F: +1.847.520.1147 Toll Free: 800.323.8185 East Coast Sales, Service, & Rental Center E.H. Wachs 1320 Delsea Drive, Unit F Deptford, New Jersey 08096 USA T: +1.856.579.8747 F: +1.847.520.1 1 4 7 West Coast Sales, Service, & Rental Center E.H. Wachs 5130 Fulton Drive Unit J Fairfield, California 94534 USA T: +1.707.439.3763 F: +1.707.439.3766 Gulf Coast Sales, Service, & Rental Center E.H. Wachs 2220 South Philippe Avenue Gonzales, Louisiana 70737 USA T: +1.225.644.7780 F: +1.225.644.7785 Wachs Subsea LLC E.H. Wachs 11050 West Little York Building N Houston, Texas 77041 USA T: +1.713.983.0784 F: +1.713.983.0703 CANADA Eastern Canada Sales, Service, & Rental Center Wachs Canada Ltd 1166 Gorham Street, Unit 8 Newmarket, Ontario L3Y 8W4 Canada T: +1.905.830.8888 F: +1.905.830.6050 Toll Free: 888.785.2000 Western Canada Sales, Service, & Rental Center Wachs Canada Ltd 5411 82nd Avenue Edmonton, Alberta T6B 2J6 Canada T: +1.780.469.6402 F: +1.780.463.0654 Toll Free: 800.661.4235 GERMANY ITW-OCW Europe Headquarters Orbitalum Tools GmbH Josef-Schüttler-Straße 17 78224 Singen Germany T: +49 (0) 77 31-792 0 F: +49 (0) 77 31-792 500 UNITED KINGDOM UK Sales, Service, & Rental Centre Wachs UK Units 4 & 5 Navigation Park Road One, Winsford Industrial Estate Winsford, Cheshire CW7 3RL United Kingdom T: +44 (0) 1606 861 423 F: +44 (0) 1606 556 364 UNITED ARAB EMIRATES Wachs Middle East & Africa Operations PO Box 262543 Free Zone South FZS 5, ACO6 Jebel Ali, Dubai UAE T: +00 971 4 88 65 211 F: +00 971 4 88 65 212 INDIA ITW Orbital Cutting & Welding ITW India Limited 4A/19, IDA Phase-1 Patancheru, Medak District - 502 319 Andhra Pradesh, India T: +91-40-3048 0819 F: +91-40-3048 0815 SINGAPORE Wachs Asia Pacific E.H. Wachs / ITW Welding Singapore 23 Tagore Lane #04-06/07 Tagore 23 Warehouse Singapore 787601 Singapore T: +(65) 9634 5432 F: +1 (847) 484 2692 CHINA ITW Orbital Cutting & Welding E.H. Wachs / Orbitalum Sales New Caohejing International Business Centre B-1501 No. 391 Guiping Road Shanghai, China 200052 T: +86 (21) 52303751 F: +86 (21) 52303758 2014 OTC-001 0314