Loess Hills Wood Turners Resource Library 10 Easy Turning Projects for the Smaller Lathe Bill Bowers Book 500 Wood Bowls Lark Books Book 7 Great

INLAND NORTHWEST WOODTURNERS NEWSLETTER. May Meeting 2008

INLAND NORTHWEST WOODTURNERS NEWSLETTER Next Meeting is Thursday, June 5, 2008 at WoodCraft Store classroom, N.E. corner of Sprague and Sullivan (N. side of the Fred Meyer parking lot) 7:00 PM May Meeting

Books by Author. Arnull, Nick. DAW1489 Contemporary Woodturning: Techniques & Projects. Baker, Mark. Batty, Allan. Begnal, Tom.

Arnull, Nick DAW1489 Contemporary Woodturning: Techniques & Projects 12.1 Baker, Mark DAW2225 Weekend Woodturning Projects 14.1 DAW2331 Wood for Woodturners 14.2 DAW2224 Wood Turning - A Craftsman's Guide

Books by Title 1/15/2018. DAW1464 Conversations with Wood. N/A or Unknown,

DAW1460 10 Easy Turning Projects for the Smaller Lathe Bowers, William 24.1 DAW1388 24 Woodturning Project Blandford, Percy 20.1 DAW1391 500 Wood Bowls N/A or Unknown, 158.1 DAW2162 500 Wood Bowls N/A

Between Turns. September Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Bill Magee 734-981-6117 Treasurer: Gene Laveroni 248-366-1963 Secretary: Jeff Scott 734-765-0397 jeffatwayne@yahoo.com

Between Turns. August Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Bill Magee 734-981-6117 Treasurer: Gene Laveroni 248-366-1963 Secretary: Jeff Scott 734-765-0397 jeffatwayne@yahoo.com

Chattahoochee Woodturners Newsletter

Chattahoochee Woodturners Newsletter Volume 17, Issue 8 www.chattahoocheewoodturners.com August 2014 Ramblings from the President Mike Peace, President 2014 Not sure if I will do any enameling soon but

Thursday. President s Letter. Next Meeting is. April 20, :00 10:00 pm

April 2017 issue email: info@revolutionary-turners.com website: http://www.revolutionary-turners.com/ Next Meeting is Thursday April 20, 2017 7:00 10:00 pm Rick Angus will demonstrate an end grain lidded

President s Letter. 2 Club Lathe Systems Available for Member Use. Next Meeting: April 2016 issue. A.R.T. Association of Revolutionary Turners

April 2016 issue A.R.T. Association of Revolutionary Turners email: info@revolutionary-turners.com website: http://www.revolutionary-turners.com/ Next Meeting: Thur, April 21, 2016 7:00 10:00 pm Demo:

Between Turns. Sharpening..In s & Outs. New Mentoring Update. Michigan Association of Woodturers A chapter of the American Association of Woodturners

C O N T A C T U S President: Tom Mogford 810-629-6176 Vice President: Pete Buccelato Between Turns Michigan Association of Woodturers A chapter of the American Association of Woodturners V O L U M E 2

Benoit Averly Demo # Eli Avisera Demo #1 Demo #2 Demo #3 Demo #4 Demo #5 Demo #6 Richard Findley Demo 1 Demo 2 Demo Demo

Benoit Averly Demo #1 Little Boxes with a French Accent How to turn little boxes using the skew a the main tool. Demo #2 Hut and Flat Boxes Turning larger hut and flat boxes. This is the next step. The

DVDs & CD s January 15, 2018 NORTHWEST INDIANA WOODWORKERS ASSOCIATION There is a $2.00 per item per month fine for over due material.

Router DVD 1.1... Router Table Mount--#1... DVD 1.2.Complete Guide to Mastering Your Router Wood Magazine DVD.. 1.5... Circle Work--#5... Bob Rosendahl DVD 1.6... Internal Guide Work--#6... DVD 1.7...

Northumbrian Woodturners Library Books

Northumbrian Woodturners Library Books Accession Number Name Author Notes 1 Adventures in David Springett missing 2 3 Scroll Saw Pattern Book Patrick Spielman missing 4 How to Make Money from Ann & Bob

Minutes/Newsletter of Space Coast Woodturners June 14, 2017

Minutes/Newsletter of Space Coast Woodturners June 14, 2017 Submitted by Randy Hardy from notes taken by Dotty Pugh (Thanks Dotty!) Just a reminder the meetings are held on the second Wednesday of the

SCWT DVD Listing by Subject 10/25/2010

DVD # ARTIST TITLE Basics 1 Bonnie Klein - Turning Basics, Coves & Beads 4 Richard Raffan Turning Wood 15 Nick Cook Beads and Coves 20 Mark St. Leger SkillBuiling Projects, (Lathe setup & maintenance)

A Chapter of the American Association of Woodturners

Our Motto: All The News That Fits... Gets Printed January 2010 Volume 23 Number 1 A Chapter of the American Association of Woodturners Next Meeting: Thursday, January 28, 2010 Start Time: 6:30 PM R. D.

Each raffle ticket is $5 with the drawing at the August

American Association of Woodturners Seattle Chapter, July, 2013 Summer is upon us with long days and temps where you don t need to heat the shop. The club is busy with community outreach, harvesting wood,

WGO NEWSLETTER ARTICLE INDEX Advice Thoughts on how to approach the design of turnings 2005 November

Advice Thoughts on how to approach the design of turnings 2005 November Advice Reasons for, and the approaches to, a good finish 2005 November Martin Groneng Advice Getting help from other turners 2005

Woodturner s Anonymous of Richmond

Woodturner s Anonymous of Richmond http://www.richmondwoodturners.org February 2009 Next Meeting: @Woodcraft, Willow Lawn Shopping Center, 4925 West Broad St (Rt. 250W), Richmond, on the third Thursday

Fine Decorative Boxes 200 Original Shop Aids & Jigs for Woodworkers jigs & fixtures

Fine Decorative Boes boes 200 Original Shop Aids & Jigs for Woodworkers jigs & fitures 3D Scroll Saw saw 50 Popular Woodworking Projects 1938 500 Do-It-yourself Wood Moulding Projects 501 Best Shop Tips

NEWSLETTER CENTRAL OHIO WOODTURNERS

! 1 OF 5! NEXT MEETING November 14, 2017 Swap and Share 6:00 Meeting 7:00 Holy Spirit Church 4401 E Broad St NOVEMBER GUEST THOMAS WIRSING DECEMBER GUEST PETE WADE Turning threads NEWSLETTER CENTRAL OHIO

Meeting Notes Nov. 18, 2013

The Turning Point Page 2 The Turning Point Meeting Notes Nov. 18, 2013 Introduction: President Dianne Looker got things started at 7:00 and thanked everyone for showing up. A notice was passed out regarding

SWAT Videos by Title 1/15/2018

DAW0548 2 Piece Hollow Vessel with Small Opening Foster, Clay 2006 2 DAW2037 A Toolbox of Embellishment Techniques to Spark Creativity Fennell, J 2013 8 DAW0699 ABC's of Surface Enhancements: Pyrography

CENTRAL OHIO WOODTURNERS April 2004

CENTRAL OHIO WOODTURNERS April 2004 From the President April 13 Club Meeting Coming Up Demonstration: Our demonstrator this month will be Jerry Beall, founder, production manager, and resident inventor

The Nutmeg. Newsletter of the Nutmeg Woodturners League Established June 14, NEXT MEETING March 13, 2017

The Nutmeg Newsletter of the Nutmeg Woodturners League Established June 14, 1989 Volume 30, No. 2 March, 2017 www.nutmegwoodturners.com NEXT MEETING March 13, 2017 Program: Favorite Jigs and Fixtures Demonstrator:

Spindle Roughing. If you ve limited the use of this tool to knocking the corners off stock, you ve missed some sweet turning experiences.

Spindle Roughing 1½" ¾" ½" GougeBy Bob Rosand ½" Next to the small round skew that I use, the gouge (SRG) just might be my favorite woodturning tool. Most people just use this tool to knock the corners

One Good Turn. Coulee Region Woodturners. Chapter of the American Association of WoodTurners.

One Good Turn Coulee Region Woodturners Chapter of the American Association of WoodTurners March 2013 Www.crwoodturner.com Volume 13, Issue 3 Thanks to Joe Hemmerich for the great demo on finishing and

Finger Lakes Woodturners II a Special Interest Group of the Rochester Woodworkers Society

Finger Lakes Woodturners II a Special Interest Group of the Rochester Woodworkers Society www.rochesterwoodworkers.org. February 2008 Meetings 2nd Thursday of each month at WOODCRAFT in Henrietta, NY at

Woodworking books 2016/2017

Woodworking books 2016/2017 Contemporary Woodturning Turning Hollow Forms Woodturning Design Turning Pens and Pencils 9781861088734 16.99 PB 9781861088932 16.99 PB GMC 276 x 210 mm 168 pages 9781861088659

Rocky Mountain Woodturners A Chapter of the American Association of Woodturners. April 2014 Newsletter

Rocky Mountain Woodturners A Chapter of the American Association of Woodturners April 2014 Newsletter Contents of Newsletter: Next RMWT Meeting, Upcoming Demonstration, Artist Profile, Future Demonstrations,

WBAWS Library. Page 1. Created on: 4/29/2003 WBAWS Library Catalog by Title

WBAWS Library Created on: 4/29/2003 American Woodturner, December 1997, Vol. 12, No. 4 Reference No.: 2002.11.17.035 American Association of Woodturners (AAW) Cover story: Classic Gateleg Revisited American

SWAT Videos by Demonstrator 1/15/2018

Adkins, Jim DAW1019 Native American Baskets Part 1 2014 20 DAW1021 Native American Baskets Part 2 2014 21 Arledge, Jimmie DAW0490 Surface Embellishment 2004 10 Avisera, Eli DAW0789 Bowl with Leaves Inlay

Luke Mann is a professional woodturner and a member

Luke Mann Waitsfield, VT Luke Mann is a professional woodturner and a member of the Woodchuck Turners of Northern, Vt. He was featured on the cover of American Woodturner in Spring 1998. In that Journal

ECHOES FROM THE BAT CAVE

ECHOES FROM THE BAT CAVE January 2019 Tom Huber - Ornament Turning Tom Huber of the Capital Area Woodworkers (CAW) was our demonstrator for January. Tom showed us how to turn lighthouse and snowman ornaments.

Demonstration Bob Rosand October 20, 2007 by Bob Gunther

Demonstration Bob Rosand October 20, 2007 by Bob Gunther Overview: Bob Rosand has been a woodturner for more than 25 years. He teaches, demonstrates and writes articles on many topics pertaining to woodturning.

ASSOCIATION OF REVOLUTIONARY TURNERS

NEXT MEETING JANUARY 27 JANUARY 23, 2005 JANUARY - VOLUME 4, ISSUE 1 ASSOCIATION OF REVOLUTIONARY TURNERS WWW.REVOLUTIONARY-TURNERS.COM INSIDE THIS ISSUE: NOTES FROM THE NET 2 PRESIDENT S COLUMN - KEN

The MUSHROOM THE NEWSLETTER OF THE ADIRONDACK WOODTURNERS ASSOCIATION Volume 7, No. 02 February 2007

The MUSHROOM THE NEWSLETTER OF THE ADIRONDACK WOODTURNERS ASSOCIATION Volume 7, No. 02 February 2007 The MUSHROOM is published 12 times a year. Submissions, notices, calendar items, suggestions feedback

Doug Newlove Memorial Library Catalogue March, 2017 Title Author / Editor Media Status

101 Projects for Woodworkers Editors of Woodworker's Journal Book Archive 101 Wooden Clock Patterns Joyce R. Novak Book Archive 101 Woodworking Projects Workbench Staff Book Archive 102 Bird Houses, Feeders

Mortar and Pestle. January The monthly newsletter of the Inland Woodturners. A Member of the American Association of Woodturners

A Member of the American Association of Woodturners January 2011 Inside this issue: Mortar & Pestle Demo 1 Officers 2 Monthly Challenge, Wood Raffle, Show and Tell Mortar & Pestle Demo (continued)) Richard

Alabama Woodturners Association

Alabama Woodturners Association April 2019 A member of the American Association of Woodturners Meeting location: Homewood Senior Center, 816 Oak Grove Rd., Homewood, AL 35209 Meeting time: The second Saturday

Finger Lakes Woodturners A Chapter of The American Association of Woodturners

Finger Lakes Woodturners A Chapter of The American Association of Woodturners Presidential Mumblings MARCH 2017 This month we will be hosting John Beaver on our normal meeting night, and the Rochester

Making Boxes with Threaded Lids Using a Threading Jig

My Way of Making Boxes with Threaded Lids Using a Threading Jig Smoky Mountains Woodturners March 18, 2014 Jared Bruckner Introduction Included in this Demo My procedure for preparing box blanks from wet

GBWG Newsletter. March. Executive Members. Other Offices. Inside This Issue

The regular meeting was held on 16 th. The business portion included an update of insurance issues for the club, of updating the website with member photographs of their turnings, and of reminders that

Minutes/Newsletter of Space Coast Woodturners January 14, 2015

Minutes/Newsletter of Space Coast Woodturners January 14, 2015 Submitted by Dotty Pugh Secretary Just a reminder the meetings are held on the second Wednesday of the month from 7:00 9:00 PM and the handson

Jam Chucks and Holding devices

A Member of the American Association of Woodturners October 2016 The monthly newsletter of the Inland Woodturners Square Bowl 1 Officers 2 Jam Chucks and Holding devices Written by Larry Cooper Photos

Buckeye Woodworkers and Woodturners

Buckeye Woodworkers and Woodturners The Official Newsletter of the Buckeye Woodworkers and Woodturners Your Officers President Fred Totts 330-325-7517 Vice President Bruce Lance 330-633-9622 Secretary

Class Descriptions for DWR2016

John Beaver Class Descriptions for DWR2016 Wave Bowls I will demonstrate the basic techniques to make my signature Wave bowls. First project will begin with a solid block of wood and free hand cut on a

Fine Arts Basket Weaving: Division 1027 Class 01: Traditional Class 02: All other varieties Ceramics: Division 1028 Class 03: Any Pottery: Division

Fine Arts Basket Weaving: Division 1027 Class 01: Traditional Class 02: All other varieties Ceramics: Division 1028 Class 03: Any Pottery: Division 1029 Class 04: Any Colored Pencil & Graphite Pencil:

WOODWORKING TITLES Order form

WOODWORKING TITLES Order form CUSTOMER: ADDRESS (inc GMC DISTRIBUTION postcode): ORDER REF: A/C NUMBER: SALES REP: NOTES: QTY ISBN Stock code Title RRP Binding Available 9781565233997 FX-17801 101 Artistic

Rocky Mountain Woodturners A Chapter of the American Association of Woodturners. May 2014 Newsletter

Rocky Mountain Woodturners A Chapter of the American Association of Woodturners May 2014 Newsletter Contents of Newsletter: Next RMWT Meeting, Upcoming Demonstration, Artist Profile, Future Demonstrations,

The Triangle Woodturner

The Triangle Woodturners of North Carolina The Triangle Woodturner Volume 11, Issue 4 April, 2002 Don Baker, Cherry/Walnut Inside this issue: Barry Wilder, Walnut 12 X 5 Frank Penta Multi-Axis Turning

Presentation Summary: February

Officers for 2019 President Jeff Foro Secretary Richard Bumgarner Vice President Lynn Taylor Treasurer Jackie Le Doux Presentation Summary: February Dick gave us a detailed look at tool edges, and why

November George Raeder is Oct. demonstrator

November 2005 George Raeder is Oct. demonstrator By Jerry Schaibles The demonstration this month was given by George Raeder on the turning of Christmas ornaments. He designed and turned two ornaments,

Christmas Party. December The monthly newsletter of the Inland Woodturners

A Member of the American Association of Woodturners December 2013 Christmas Party 1 Officers 2 Monthly Challenge, Wood Raffle, 2 Instant Gallery 3 Woodturning Schools 4 Upcoming Events 5 Festivities 6

Offset turning female form

A Member of the American Association of Woodturners November 2016 The monthly newsletter of the Inland Woodturners Offeset Turning 1 Officers 2 Offset turning female form Written by Larry Cooper Photos

Presidents Message. Newsletter of the Treasure Coast Woodturning Guild. Hi Everyone,

An Affiliate Chapter of the American Association of Woodturners Newsletter of the Treasure Coast Woodturning Guild Hi Everyone, Presidents Message I got through my little operation without too much inconvenient

A Publication of the Mid Minnesota Association of Woodturners

A Publication of the Mid Minnesota Association of Woodturners Volume 8, Issue 8 August 1, 2018 The Mid Minnesota Association of Woodturners (MMAW) is a member based not for profit organization, providing

Chips & Bits. Peace River Woodturners. Meeting Annncements. Frank Bauer s Spin Top turning demonstration

Chips & Bits Peace River Woodturners Volume 8 Issue 10 A chapter of the American Association of Woodturners October 2015 President: Contact Us Norman Desjardins: 941-613-0245 Vice President: Bob Moran:

Newsletter July 2005 Rocky Mountain Woodturners

Next Meeting Thur July 7th 7:00 PM Industrial Sciences Building Rm 105 Cindy Drozda Bandsaw Tune-up Auction Our auction raises a bit of money (about the cost of the newsletter) and gives our President

Making Working Wooden Locks (Woodworker's Library) By Tim Detweiler

Making Working Wooden Locks (Woodworker's Library) By Tim Detweiler Workbenches & Workbench Accessories. Sort By Husky 4 ft. Solid Wood Top Bench Solution Commercial Duty Foldaway Workbench with 60 in.

Finger Lakes Woodturners A Chapter of The American Association of Woodturners

Finger Lakes Woodturners A Chapter of The American Association of Woodturners Presidential Mumblings March 2018 Our next meeting is on Thursday April 19, beginning at 6:00pm with a show and share of members

Between Turns. September Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Between Turns C O N T A C T U S : President: Tom Mogford 810-629-6176 Vice President: Bill Magee 734-981-6117 Michigan Association of Woodturners A chapter of the American Association of Woodturners V

Turning Threads In Wood -- It's Easier Than You Think

Turning Threads In Wood -- It's Easier Than You Think David Gould I first became interested in thread chasing while watching the Mike Mahoney video Hollow Forms And Urns A Workshop, in which Mike threaded

Echos From the BAT. Cave. Woodworking Show. Baltimore Area Turners. Inside this issue: Woodworking Show 2 Show and Tell 3 Gallery 5 Other Stuff 6

Echos From the BAT Baltimore Area Turners Cave January, 2012 Volume 7, Number 1 Woodworking Show Inside this issue: Woodworking Show 2 Show and Tell 3 Gallery 5 Other Stuff 6 2012 Officers: For the 3rd

SPIN LET'S GO FOR A AAW DEVELOPED BY ALAN N. LELAND OF LELAND STUDIOS. woodturner.org EDUCATION

LET'S GO FOR A SPIN AAW EDUCATION DEVELOPED BY ALAN N. LELAND OF LELAND STUDIOS An exploration of woodturning, taught through a series of skill and technique exercises, followed by a variety of fun and

The Monthly Newsletter of the Windy City Woodturners

Volume 28 Issue 3 March 2018 The Monthly Newsletter of the Windy City Woodturners In This Issue: President s Message Club News February Gallery Library Review AAW Information Turn On Chicago Gateway To

Northwest Washington Woodturners A Local Chapter of the American Association of Woodturners Monthly Newsletter for November 2008

Northwest Washington Woodturners A Local Chapter of the American Association of Woodturners Monthly Newsletter for November 2008 Northwest Washington Woodturners... meets every third Thursday of the month

Between Turns. July Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Between Turns C O N T A C T U S : President: Michigan Association of Woodturners A chapter of the American Association of Woodturners Tom Mogford 810-629-6176 Vice President: V O L U M E 2 3, I S S U E

Finger Lakes Woodturners A Chapter of The American Association of Woodturners

Finger Lakes Woodturners A Chapter of The American Association of Woodturners Presidential Mumblings October 2017 This month we will be hosting Tom Wirsing, a National Turner. This is a joint effort with

C a p i t a l A r e a W o o d t u r n e r s

M o n t h l y M e e t i n g Saturday, July 13, 2013, 8:30 to 2:30 at Bryant HS. Our July meeting day program is Willie Simmons. I'd call him a productive craft turner. He turns both on spec and commission.

O nament. Birdhouse. Birdhouse Christmas ornaments have become very

Birdhouse O nament Photo by Al Parrish Dale Nish, one of the principal architects of the turning revival, shares some turning techniques. Birdhouse Christmas ornaments have become very popular the last

North Alabama Woodturners Newsletter A registered AAW chapter Edition 18-09

North Alabama Woodturners Newsletter A registered AAW chapter Edition 18-09 2 Meeting Dates: NAW meets the 4th Saturday of each month except when the meeting conflicts with a holiday or major wood turning

Woodcraft Guild Tasmania Inc. Library Listing

Woodcraft Guild Tasmania Inc. Library Listing May 2017 Librarian Brian Weeding 04 3827 7070 Wood Turning WT 1 Decorative Techniques for Wood Turners WT 2 Woodturning Jewellery WT 3 Creative Woodturning

Shavings. May A monthly publication of: A message from the President. Free gifts

May Shavings May 2010 A monthly publication of: Special points of interest: May and June AAW give aways Free gifts In this issue: AAW prizes Pg. 2 New member Pg. 3 A message from the President The May

Finger Lakes Woodturners A Chapter of The American Association of Woodturners

Finger Lakes Woodturners A Chapter of The American Association of Woodturners From The Chair February 2014 Our year of demonstrations has been going great! Last month was no exception as Bill McColgin

One Good Turn Coulee Region Woodturners Chapter of the American Association of Woodturners

One Good Turn Coulee Region Woodturners Chapter of the American Association of Woodturners Volume 8, Issue 1 January 9, 2008 So you have trouble sharpening tools??? Saturday January 19 9 am The first meeting

SPIN LET'S GO FOR A AAW DEVELOPED BY ALAN N. LELAND OF LELAND STUDIOS. woodturner.org EDUCATION

LET'S GO FOR A SPIN AAW EDUCATION DEVELOPED BY ALAN N. LELAND OF LELAND STUDIOS An exploration of woodturning, taught through a series of skill and technique exercises, followed by a variety of fun and

NORTH COAST WOOD TURNERS N E W S L E T T E R

N E W S L E T T E R March, 2010 - NCWT s 24th Year as an AAW Chapter Inside this issue: Ray Muniak Demo 1 President s Turn 2 Meeting Minutes 3 Safety First Beginner s Corner Show and Tell Survey Results

NOVEMBER What s Inside PREZ SEYZ. Page 2 OFFICER ELECTIONS. Page 3 NOVEMBER DEMO. Page 5 SHOW AND TELL. Page 14 PEN WOOD OF THE MONTH.

NOVEMBER 2018 What s Inside PREZ SEYZ Page 2 OFFICER ELECTIONS Page 3 NOVEMBER DEMO Page 5 SHOW AND TELL Page 14 PEN WOOD OF THE MONTH Page 17 TURNING TIP Page 22 LIBRARY UPDATE Page 24 PREZ SEYZ Well,

Between Turns. March 2012 Meeting... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Between Turns C O N T A C T U S : President: Michigan Association of Woodturners A chapter of the American Association of Woodturners Tom Mogford 810-629-6176 Vice President: V O L U M E 2 4, I S S U E

Show and Tell Table. Please make sure to sign the show and tell sheet so credit can be given.

Jim brought in two of his carved and painted vessels. Jim recently demonstrated his techniques at the Blue Water Turners Mini -Symposium. Bill Magee - Black Oak Burl Platter Dennis Stange - Hickory Lidded

Minutes/Newsletter of Space Coast Woodturners February 13, 2013

Minutes/Newsletter of Space Coast Woodturners February 13, 2013 Submitted by Dotty Pugh - Secretary * President Read Johnson called the meeting to order at 6:59PM and announced that we would only have

THE WOODTURNER. Ken Rogers

Golden Triangle Woodturners Club Denton Texas THE WOODTURNER www.goldentrianglewoodturners.org Ken Rogers We moved to Richardson in 1976 and I started turning in 91 after seeing some hollow vessels at

Northwest Washington Woodturners A Local Chapter of the American Association of Woodturners Monthly Newsletter for September 2010

Northwest Washington Woodturners A Local Chapter of the American Association of Woodturners Monthly Newsletter for September 2010 Northwest Washington Woodturners... meets every third Thursday of the month

The Tennessee Turner. Tennessee Association of Woodturners

Tennessee Association of Woodturners June 2009 Volume XXII, Issue 6 Inside This Issue: President s message 1 June 2 Meeting Info 2 Sawdust Trail June 5, 6 2 June 20 Saturday Turn In 2 2009 Schedule 2 Minutes

One Good Turn Coulee Region Woodturners Chapter of the American Association of Woodturners

One Good Turn Coulee Region Woodturners Chapter of the American Association of Woodturners Volume 6, Issue 2 February 6, 2006 Next Meeting Sat., 18 February 2006, 9:00 AM at the B&B Studio in La Crosse,

Between Turns. May Stump The Pro... Upcoming Dates. Michigan Association of Woodturners A chapter of the American Association of Woodturners

Between Turns C O N T A C T U S : President: Michigan Association of Woodturners A chapter of the American Association of Woodturners Tom Mogford 810-629-6176 Vice President: V O L U M E 2 2, I S S U E

A Member of the American Association of Woodturners

A Member of the American Association of Woodturners April 2016 The monthly newsletter of the Inland Woodturners Square Bowl 1 Officers 2 Candle Stick Holder Written by Larry Cooper Photos by Larry Cooper

West Tennessee Woodturners Newsletter

West Tennessee Woodturners Newsletter April 2011 Volume 3 Issue 4 Inside this issue: Woodworking at local school 2 Kearns at MSWG 2 Upcoming Events 2 Additional Resources 2 Minutes from March Meeting 3

http://flinthillswoodturners.org Projects turned on the lathe make wonderful Christmas gifts. At our October meeting, Tom Shields will demonstrate the steps he takes in creating an inside out ornament.

Echos From the BAT. Cave. David Ellsworth. Baltimore Area Turners. Inside this issue: David Ellsworth 2 D&D Log Cradle 5 Other Stuff 6.

Echos From the BAT Baltimore Area Turners Cave March, 2012 David Ellsworth Inside this issue: David Ellsworth 2 D&D Log Cradle 5 Other Stuff 6 2012 Officers: In March, BAT was graced with a visit by Grandmaster

The Chip Flyer. Golden Horseshoe Woodturners Guild - Burlington, Ontario. Presidents Annual Report

150TH CHAPTER OF THE AMERICAN ASSOCIATION OF WOODTURNERS January 2008 The Chip Flyer Golden Horseshoe Woodturners Guild - Burlington, Ontario Presidents Annual Report President s Annual Report for 2007

GOOD TURNS. October has been a very busy month and it hardly seems. November 2007 W O O D T U R N E R S. President s Message.

CENTRAL OHIO November 2007 GOOD TURNS W O O D T U R N E R S The November meeting will feature several turners demonstrating small holiday gift projects. There will be projects for all skill levels demonstrated

Finger Lakes Woodturners A Chapter of The American Association of Woodturners

Finger Lakes Woodturners A Chapter of The American Association of Woodturners From The Chair November 2014 Last month we had a great meeting, demonstration and hands-on workshop with Derek Weidman. It

Echos From the BAT. Cave. Hands On. Baltimore Area Turners. Inside this issue: Hands On 2 Book Review 5 Other Stuff 6.

Echos From the BAT Baltimore Area Turners Cave April, 2012 Hands On Inside this issue: Hands On 2 Book Review 5 Other Stuff 6 2012 Officers: April s Hands On session featured Green Wood Bowl turning, Spindle

WOOD CHIPS. Northwest Indiana Woodworkers Association Volume 19, Issue 6 June President s Ramblings

WOOD CHIPS Northwest Indiana Woodworkers Association Volume 19, Issue 6 June 2015 President s Ramblings Greetings Fellow Woodworkers, June is upon us and the weather has been terribly wet this past week.

SOUTH FLORIDA WOODTURNERS GUILD

SOUTH FLORIDA WOODTURNERS GUILD A CHAPTER OF THE AMERICAN ASSOCIATION OF WOODTURNERS JUNE 2008 NEWSLETTER VOL 21 NUMBER 6 PRESIDENT S MESSAGE: The message this month will be brief. Hope to see everyone

******** Health nuts are going to feel stupid someday, lying in hospitals dying of nothing. ********

January 2015 Find me on facebook! http://www.facebook.com/lyle.jamieson1 Subscribe to my YouTube channel http://www.youtube.com/user/jamiesonlyle Please include your location if you write in with comments

Image Item Model Price. Salt mill Mechanism Kit NO ROD INCLUDED (USA) Woodturning Kit Chrome Bottle Opener Kit (Woodturning) 07045

PO Box 531 Merrimack, NH 03054 craig@chefwarekits.com 267 888 6216 http://www.chefwarekits.com/ Category: All Categories Image Item Model Price Salt mill Mechanism Kit NO ROD INCLUDED (USA) Woodturning

Between Turns. Bird House Demonstration (Miniature) MAW s 20th Anniversary

Between Turns C O N T A C T U S President: Tom Mogford 810-69-6176 Michigan Association of Woodturers A chapter of the American Association of Woodturners V O L U M E 0, I S S U E 3 M A R C H 0 0 8 Vice

Woodturners. Kansas City. January 1999 Local Chapter of The American Association of Woodturners Newsletter No. 55

Kansas City Woodturners January 1999 Local Chapter of The American Association of Woodturners Newsletter No. 55 The January Meeting The next meeting will be held at 7:00 PM, Monday, January 11th, at Consolidated