Product Selection Guide

Size: px

Start display at page:

Download "Product Selection Guide"

Adelia Welch
5 years ago
Views:

1 Selection Guide GLAZING PRODUCTS DOOR LOUVERS VISION FRAMES D o o r P r o d u c t s 4958 Stout Dr. #119 San Antonio, TX Fax door@anemostat

V I S I O N Standard Glass 20 GA (1mm) or Glazing -IS Custom LoFP for Special Glass or Round Metal 20 GA (1mm) 20 GA (1mm) 1-3/8" - 2-3/8" (35 to 60 mm) 1/4 to 1 (6 to 25 mm) Glazing or Glazing -CS

2 V I S I O N Standard Glass 20 GA (1mm) or Glazing -IS Custom LoFP for Special Glass or Round Metal 20 GA (1mm) 20 GA (1mm) 1-3/8" - 2-3/8" (35 to 60 mm) 1/4 to 1 (6 to 25 mm) Glazing or Glazing -CS Custom Shape 20 GA (1mm) or Glazing -IS-MB with Internal White Mini-Blind 1 (25mm) Clear Tempered Insulated Glass Unit 20 GA (1mm) Vision 1" Insulated Unit with tempered glass two sides -IS-50/ for Special -R Oval -RC Round Corner -RD Half Circle E: For Exterior use, High Humidity or Salt Air Application, product must be Galvanized or Stainless Steel.

3 V I S I O N V I S I O N Special Glass FGS-75 Thru-Bolted 1/4" (6mm)or Glazing FGS-IS Thru-Bolted for Special Glass or 1-3/8" to 2-1/4" (35 to 57 mm) 5/16 to 2-1/16 (8 to 52 mm) Glazing BFL-123 Self Attaching Beveled Metal 1/4" (6mm)or Glazing -G with French Grilles 20 GA (1mm) or Glazing FM-G d Mullion Grille for Sidelites and Borrowed Lites Standard Mullions are 3/4" x 3/4" (19mm x 19mm) steel tube material Countersunk mounting holes allow screws to fasten directly into the hollow metal frame For use in sidelites or borrowed lites Can be any thickness that provides a spacing allowance for d Mullion assembly Does not affect a fire-rated sidelite or borrowed lite FGS for 1-3/8" FGS-DBL for Double Glazing BFL Thru Bolted BFL-75-PO for Post Office Observation -IS-G with French Grilles for use with Special Glass or es BFL-123-G with French Grilles, Self Attaching FGS-75-G with French Grilles, Thru Bolted E: For Exterior use, High Humidity or Salt Air Application, product must be Galvanized or Stainless Steel.

V I S I O N Glass BR-7 Bullet and Impact Resistant Metal Face Plate: 7 GA (4.5mm) Back 1-3/4" to 2-1/4" (44 to 57 mm) Metal up to 1-9/16" (40mm) / Impact Safety and/or Bullet Glazing FIRE: BULLET:.

4 V I S I O N Glass BR-7 Bullet and Impact Resistant Metal Face Plate: 7 GA (4.5mm) Back 1-3/4" to 2-1/4" (44 to 57 mm) Metal up to 1-9/16" (40mm) / Impact Safety and/or Bullet Glazing FIRE: BULLET:.44 mag. and 12 ga. shotgun IMPACT: ASTM F SL-IS with Grille for Standard / Special or Glass Grille: 1-3/4" to 2-3/8" (44 to 60 mm) up to 1-9/16" (40mm) and Safety Glazing -SC-GR with Grille and Operating Cover 20 GA (1mm) Grille and Cover: 16 GA (1.5mm) 1/4" (6mm)or Glazing SG-12-LCP Metal with Locking Cuff Port / Food Pass Cover: 16 GA (1.5mm) 1-3/4" to 2-1/4" (44 to 57 mm) up to 1-9/16" (40mm) Glazing SSD Sliding for Selective Vision into High Areas Channel and Sliding Screws directly into door over pre-existing vision lite and up Wood or Metal Fits over glazing and/or vision frame SG High for Special Glass or SL-FS Grille Both Sides with Stainless Steel Screen SL-FS-LSC Same as SL-FS with Locking Cover FGS-MS-FR Impact and Resistant SG-12-LSC High with Locking Cover FGS-75-SC with Operating Cover -SC with Cover SG-10-SP High with Double Speak Port (with Baffle) SG-12-SP with Speak Port SG-12-SP-SSD with Speak Port and Sliding SG-10-SP-SSD High with Speak Port and Sliding -SSD with Sliding E: For Exterior use, High Humidity or Salt Air Application, product must be Galvanized or Stainless Steel.

5 R G L A Z I N G P R O D U C T S Material Model Installation Classification Markings Other SAFE-Wire SAFE-Wire CLASSIFIED C US UR L FROM FIRE & SAFETY GLAZING R S1 UP TO 90 MIN. D-NT-H CAT II 1/4" (6mm) with Safety Film Polished wire glass (diamond pattern) with surface applied safety film with GT-18, Pyrodur U. S. A. FROM U L CLASSIFIED Glazing Material 9FX5 9/32" (7mm) Clear 20 minute Laminated glass with a special interlayer with GT-116, 1/16" (1.6mm) of glass. Interior use only. 20 minute Category I Lite NT Lite NT from GLAZING MATERIAL CLASSIFIED BY R CAT II R SI UP TO 90 MIN. Clear with Safety Film Clear ceramic w/ 3M surface applied film. STANDARD: slight distortion PREMIUM: maximum clarity with GT-18, U.L. and WHI mark in Lite Plus Lite Plus from GLAZING MATERIAL CLASSIFIED BY R CAT II R SI UP TO 90 MIN. Laminated Clear Clear ceramic laminated with 2 pieces of PREMIUM Lite and a proprietary interlayer with GT-132, 1/32" (.793mm) U.L. and WHI mark in Lite IGU 1" (25mm) Insulated Unit Insulated unit, incorporates Lite Plus with 1/4" (6mm) Tempered Glass -IS with GT-132, 1/32" (.793mm) Pyrostop to 2-3/8" (62mm) Clear Uses multiple layers of float glass, laminated with transparent intumescent interlayers -IS or FGS-IS (over 1" (25mm) thickness) with GT-116, 1/16" (1.6mm) to both sides of glass. Glaze w/ setting blocks to support the glass STC : db Bullet : Level 1 to Level 3 E: Must be used in an appropriately tested door assembly.

G L A Z I N G P R O D U C T S Safety Material Model Installation Classification Markings Other Tempered ANSI Z97.

6 G L A Z I N G P R O D U C T S Safety Material Model Installation Classification Markings Other Tempered ANSI Z CFR 1201 CAT II SOLID TEMPERED 1/4" (6mm) Safety Clear heat strengthened glass. Also available in bronze, gray or graylite. with GT-18, to both sides of glass ANZI Z CFR 1201 Glazing Tape 1/32" (.793mm) 1/16" (1.6mm) Closed Cell Foam Sealant Closed cell polyvinyl chloride foam tape with pressure sensitive adhesive two sides All models. Tape thickness will vary based on model, and glass thickness used Peels off roll and is placed directly onto clean surface of vision frame or glass U.L., WHI, BS and - Impact Lexan MR-10 1/8" (3mm) 1/4" (6mm) 3/8" (9.5mm) 1/2" (12.7mm) Polycarbonate Impact Strength of LEXAN with a proprietary abrasion and UV resistant Margard II coating on both sides Various models based on impact, or security application, and glazing thickness required Directly into vision frame or hollow metal frame MP-750 Bullet Resistant and Forced Entry Glazing Clear, 3-ply LEXAN Polycarbonate with acrylic sheet and bonding interlayer BR-7 or SG-10 Directly into vision frame Bullet :.38 super ASTM F , U.L. 752 Level 1 (9mm) HPW-TP Level B (9mm) SP /16" (33mm) Bullet Resistant and Forced Entry Glazing Clear, 4-ply LEXAN Polycarbonate with bonding interlayers Other s Available BR-7 Directly into vision frame Bullet :.44 magnum ASTM F , U.L. Level 3, HPW-TP Level C Bomb Blast: Approx lbs. TNT/115 ft., 57 psi/15 msec. Wire Glass /4" (6mm) - NON Lite Clear, - NON glass /4" (6mm) Clear, 20 Minute - Tempered IGU " (25mm) Insulated Glass Unit - E: Must be used in an appropriately tested door assembly.

GA (.75mm) Beige or Installs into door or sidelite using wood or metal stops (by others) on one or both sides of the louver core.

7 D O O R L O U V E R S D O O R L O U V E R S Standard AFDL Non-Vision Inverted Y Louver Blades: 22 GA (.75mm) Beige or metal screws 1-3/8" to 2-1/8" (35 to 54 mm) FLDL-UL Fusible Link Louver Beige or metal screws 1-3/4" to 2-1/2" (44 to 64 mm) UL Special CHDL Non-Vision Inverted V Louver Core Only 22 GA (.75mm) Beige or Installs into door or sidelite using wood or metal stops (by others) on one or both sides of the louver core. 1-1/16" (27mm) core thickness plus width of stops used on both sides of the core PLSL Louver with Grille, Non-Vision Inverted Split Y Grille: Blades: Beige or thru the door 1-3/8" to 2-1/2" (35 to 64 mm) FLDL-UL-SG2 Fusible Link Louver with Grille Both Sides Grille: Blades: Beige or metal screws 1-3/4" to 2-1/2" (44 to 64 mm) UL AFDL-T Transom Louver - Core Only FDLS Inverted Split Y Non-Vision Louver CHDL-1F.. Inverted V Non-Vision Louver - Louver Core, One Side CHDL-2F.. Inverted V Non-Vision Louver - Louver Core, Both Sides DRDL Double Inverted V - Darkroom Louver ADL Operating (Open/Close) Z Blade Louver SRDL Storm Proof, Extruded Aluminum Louver FPL Fixed Position Self Attaching Z Blade Louver FPL Fixed Position Thru Bolted Z Blade Louver DSFP Grille Face Plate FLDL-UL-SG Fusible Link Louver with Grille One Side E: For Exterior use, High Humidity or Salt Air Application, product must be Galvanized or Stainless Steel.

VISION FRAMES DOOR LOUVERS GLAZING PRODUCTS.

VISION FRAMES DOOR LOUVERS GLAZING PRODUCTS. GLAZING PRODUCTS DOOR LOUVERS VISION FRAMES www.anemostat W H Y B U Y A N E M O S T A T? Sales Support Service and Performance You Can Depend on Can Do, Knowledgeable, and Refreshingly Helpful Customer