INDEX. 110 powermatic.com. Accu-Fence Assembly for PM Accu-Fence Rear-Lock Assembly 12. Accu-Fence Side Panel Replacement Kit 12
|
|
- Aubrey Welch
- 5 years ago
- Views:
Transcription
1 INDEX A Accu-Fence Assembly for PM Accu-Fence Rear-Lock Assembly 12 Accu-Fence Side Panel Replacement Kit 12 Accu-Fence System 30" Accu-Fence System 50" B Bandsaw, 14" PWBS Bit and Chisel, Mortiser 1/2" 82 Bit and Chisel, Mortiser 1/4" 82 Bit and Chisel, Mortiser 3/4" 82 Bit and Chisel, Mortiser 3/8" 82 Bit and Chisel, Mortiser 5/16" 82 Bit, Dovetail 92, 94 Byrd insert cutters (10 pack) 44 Byrd 20" cutterhead with inserts 45 Byrd 15" cutterhead with inserts 45 C Collector (lower) bags, clear plastic (50 each) 52 Contractor Tablesaw, Model 64A D Dado Insert for Model 64A 14 Dado insert for Model Dado Insert for PM DC Adaptor for 8" to 6" for Model Disc Sander, 12" PDS-12CS: 12" Disc Sander 54 Disc Sander, Model DS-20 20" Disc Sander 55 Disc Sanders Dovetail bit 92, 94 Dovetailers Drill Press,18", PM2800, 18" Variable Speed Drill Press Dual Drum Sander, Model DDS Dust Collectors powermatic.com
2 INDEX E Edge Sander, Model Extension Table 27" x 35-3/8" for Rout-R-Lift 14, 16 Extension Table 28" x 24" for Rout-R-Lift 12, 16 Extension Table 28" x 35-3/8" for Rout-R-Lift 12, 16 Extension Table Legs (Set of 2) 11, 12, 14, 16 Extension Table, 30-1/2" x 24" 11, 16 Extension Table, 30-1/2" x 24" for Rout-R-Lift 11, 16 Extension Table, 30-1/2" x 36" 11, 16 Extension Table, 30-1/2" x 36" for Rout-R-Lift 11, 16 F Featherboard 14 H Heavy duty deluxe miter gauge 11 J Jointer Knives 6" (Set of 3) 30 Jointer knives 8" (set of 3) 32 Jointers, Model 54A Jointers, Model 60B Jointers, PJ882 Parallelogram K Knife, Riving, Low Profile for PM Knife, Riving, Thin Kerf for PM Knife, Riving, Thin Kerf Low Profile for PM Knives for Model 15 Planer, (set of 3 ) 40 Knives for Model 15S Planer (set of 3) 40 Knives for Model 209 Planer, Single-sided knives (set of 4) 42 Knives, Jointer 6" (Set of 3) 30 Knives, Jointer 8" (set of 3) 32 L Low Profile Riving Knife for PM Lower collector bag, clear plastic (1 each) 52 Lower collector bag, cloth (1 each) 52 M M15-K3: HSS Knife Set for Model 15S (3) for 15" Planer 45 Miter Gauge 14 Mobile Base for Model 54A, 6" Jointer 17, 30 Mobile Base for Model 60B, 8" Jointer 17 Mobile Base for Model 64A (saw only), 10" Table Saw 14, 17 Mobile Base for Model 64A with 30" Rip Capacity, Ext. Table and Legs 14, 17 Mobile Base for Model 64A with 50" Rip Capacity, Ext. Table and Legs 14, 17 Mobile Base for Model 66 (saw only), 27 Shaper, and 27 Super Shaper 12, 17 Mobile Base for Model 66 with 30" Rip Capacity, Ext. Table and Legs 12, 17 Mobile Base for Model 66 with 50" Rip Capacity, Ext. Table and Legs 12, 17 Mobile Base for PJ882 8" Parallelogram Jointer 17, 34 Mobile Base for PWBS-14, 14" Band Saw 17, 26 Model 25A Shaper
3 INDEX Model 3520B Wood Lathe Model 4224 Wood Lathe Model 64A 27" x 35-3/8" Extension Table for Rout-R-Lift Model 66 Tablesaws Model 75 Dust Collector Model DT45 Dovetailer Model PF-33 Power Feeder Model PF3-EZ Power Feeder Model PF3-JR Power Feeder Model PF-43 Power Feeder Model PF4-ARC Power Feeder Model PF-BS Power Feeder Model PM2700 Shaper Molding Guide System for Model PM15 50 Mortise Attachement 80 Mortiser 1/2" chuck with key 84 Mortiser 5 Bit Set 82 Mortiser Accessories 80, 82, 84 Mortiser Bit and Chisel, 1/2" 82 Mortiser Bit and Chisel, 1/4" 82 Mortiser Bit and Chisel, 3/4" powermatic.com Mortiser Bit and Chisel, 3/8" 82 Mortiser Bit and Chisel, 5/16" 82 Mortiser Chisel & bit 1/2" 84 Mortiser Chisel & bit 1/4" 84 Mortiser Chisel & bit 3/8" 84 Mortiser Chisel & bit 5/16" 84 Mortiser Chuck extension adapter 84 Mortiser Drill adapter shaft 84 Mortiser Drill bushing 1-1/8" 84 Mortiser Drill bushing 3/4" 84 Mortiser Drill bushing 5/8" 84 Mortiser, 719T Tilt Table with Stand Mortiser, Bench Top Stand 701S 82 Mortiser, PM701 Benchtop Deluxe Mortisers P Planer 15" Accessories 40, 44 Planer Knives for Model 15 Planer, (set of 3 ) 40 Planer Knives for Model 15S Planer (set of 3) 40 Planer Knives for Model 209 Planer, Single-sided knives (set of 4) 42 Planer, 15" Planer, 20" Accessories Planer, Model 15HH-15S With Byrd Shelix Helical Cutterhead 45 Planer, Model 15S: PM 15" Deluxe Planer Planer/Molder 15 Accessories 50 Planer/Molder, 15" - Model PM Planers, 20" Model Planers, 20" Model 209HH-1 With Byrd Shelix Helical Cutterhead 45 PM2000 Cabinet Tablesaw Accessories 11 PM2000 Tablesaws PM2700 Shaper Power Feeders PWBS-14CS 14" Bandsaw R Riser Block 6" for PWBS-14CS 26 Riser Block 701-RB Kit 82 Rout-R-Lift Rout-R-Lift with deluxe fence 10 16
4 S Sandpaper 100 grit 62 Sandpaper 120 grit 62 Sandpaper 150 grit 62 Sandpaper 180 grit 62 Sandpaper 220 grit 62 Sandpaper 36 grit 62 Sandpaper 60 grit 62 Sandpaper 80 grit 62 Set of Rout-R-Lift insert rings 16 Shaper - 1" Spindle for PM2700 Shaper 72 Shaper - 1/2" Collet for PM2700 Shaper 72 Shaper - 1/2" Spindle for PM2700 Shaper 72 Shaper - 1/4" Collet for PM2700 Shaper 72 Shaper - 30mm Spindle for PM2700 Shaper 72 INDEX Shapers Shapers and Accessories SHELIX -15: 15" SHELIX Helical Cutterhead 44 SHELIX -20: 20" SHELIX Helical Cutterhead 44 SHELIX -I: (10) Inserts For SHELIX Cutterhead 44 Sliding Table, Retrofit for Model T Table Insert 14 Table Insert for Model 64A 17 Table insert for Model Tablesaws Tenoning Jig with Quick Release 14, 17 Thin Kerf Low Profile Riving Knife 11 Thin Kerf Riving Knife 11 Two micron canister filter 52 U Upper filter cloth bag (1 each) 52 W Wood Lathe 1-1/4" to 1-1/2" Adaptor 66, 68 Wood Lathe 12" Metal Spinning Tool Rest 66, 68 Wood Lathe 14" Tool Support 66, 68 Wood Lathe 16" Tool Support 66, 68 Wood Lathe 18" Bed Extension Assembly 68 Wood Lathe 20" Short Bed Extension 66 Wood Lathe 26" Tool Support Assembly 66, 68 Wood Lathe 3" Face Plate 66, 68 Wood Lathe 4" Face Plate 66, 68 Wood Lathe 50" Bed Extension Assembly 68 Wood Lathe 6" Tool Support 66, 68 Wood Lathe 65" Long Bed Extension 66 Wood Lathe 7" Face Plate 66, 68 Wood Lathe Accessories 66, 68 Wood Lathe Ball Bearing Tailstock Center 68 Wood Lathe Bowl Turning Tool Rest (Left) 66, 68 Wood Lathe Bowl Turning Tool Rest (Right) 66, 68 Wood Lathe Dust Port Assembly 68 Wood Lathe Heavy Duty Outboard Turning Stand Assembly 66, 68 Wood Lathe Remote ON/OFF Switch 68 Wood Lathe Short Bed Extension Tool Rest 66 Wood Lathe Spindle Extension 68 Wood Lathe Tool Rest Base Assembly 66 Wood Lathes Z Zero Clearance Insert for Model 64A, JWTS-10 and JTAS-10X 14, 17 Zero Clearance Insert for Model 66 12, 17 Zero Clearance Insert for PM ,
5 I N D U S T R I A L INDUSTRIAL INDEX B Bandsaw, Industrial 20", Model Bandsaw, Industrial 24", Model Bed and Feed Roller Setting Gauge for Model 201 Planer 46 C Cut Off Saw, Accy, 4 Infeed Table for COS Cut Off Saw, Accy, 8 Outfeed Table with Rule and Stops for COS Cut Off Saw, Model COS D Dovetail Bit 94 Dovetailer, Model DT H Horizontal Panel Saws, Model HPS Horizontal Panel Saws, Model HPS POWERMATIC Industrial Tools Available Only at Select Distributors. 114 powermatic.com J Jointer Accessories, Inserts (Set of 10) for Model 1285 Spiral Head and Model PJ Jointer Accessories, Standard Knives (Set of 3) for Model 1285 Straight Knife 36 Jointer Accessories, Rabbet Inserts (Set of 2) for Model 1285 Spiral Head and Model PJ Jointers Jointers, Model Jointers, Model PJ L Line Boring Machine, Model CBM Line Boring Machine, Model LBM M Model 29 Shaper Model TS29 Shaper Mortiser Heavy Duty 720HD P Panel Saws, Vertical, Model Panel Saws, Horizontal, Model HPS Panel Saws, Horizontal, Model HPS Planer Accessories, Knives (Set of 4), Single Sided for Model Planer, 20",Model Planer, 25" Model WP S Sanding Belt, 9" x 138-3/4", 80 Grit, for Model OES Oscillating Edge Sander, Model OES Wide Belt Sander, 25", WB Wide Belt Sander, 37", WB Wide Belt Sander, 43", WB Spindle Assembly, 1" for Model 29 Shaper 74 Spindle Assembly, 1-1/4", for Model 29 Shaper 74 Shapers Straight Line Rip Saw, Model SLR Straight Line Rip Saw Accy, Laser Line of Sight Assembly for Model SLR12 24 V Vertical Panel Saws, Model
6 Feel What It s All About PowIndex /24/06, 8:13 AM
Powermatic Sale 10% Off March 24 through 27,
Powermatic Sale 10% Off March 24 through 27, Stock Number Product Description MAP Sale Price 1352001 3520B Lathe, 2HP, Will Operate 1Ph or 3Ph, 230V $3,999.99 $3,599.99 1510007 511 Panel Saw with 4" Dust
More informationSAVINGS EVENT $ POWERMATIC PRIDE. Powermatic Sign Giveaway Free Accessories Price Reductions On All Products Save Even More with Rebates
POWERMATIC PRIDE SAVINGS EVENT PRICES EFFECTIVE JANUARY 1, 2009 TO APRIL 30, 2009 PRICES EFFECTIVE JANUARY 1, 2009 TO APRIL 30, 2009 Giveaway Free Accessories Price Reductions On All Products Save Even
More informationRebate Event. Woodworking FREE Stock No K. Rebates and Free. Accessories on Select Award Winning Tools
Woodworking Rebate Event Pricing effective: January 1 April 30, 2008 2299 99 Stock No. 1792000K List Price 2742.00 JET 12 PIECE - PARALLEL CLAMP FRAMING KIT Rebates and Free Accessories on Select Award
More informationCELEBRATION $ STOCK NO $ STOCK NO K STOCK NO T H E G O L D S T A N D A R D S I N C E
T H E G O L D S T A N D A R D S I N C E 1 9 2 1 CELEBRATION PM1200 Air Filtration SysteM 379 99 STOCK NO. 1791330 SEE PAGE 12 FOR DETAILS PM2000 10" CABINET SAW 2899 99 STOCK NO. 1792000K SEE PAGE FOR
More information15% OFF ON SELECT POWERMATIC WOODWORKING MACHINES
-day sale SAVE UP TO an extra 1% OFF ON SELECT POWERMATIC WOODWORKING MACHINES A N D A C C E S S O R I E S T H E G O L D S T A N D A R D S I N C E 1 9 2 1 POWERMATIC.COM PRICES EFFECTIVE: NOVEMBER 2 TO
More informationTABLES SAWS Laguna Fusion 10 tablesaw Laguna Platinum 10" Tablesaw Laguna Platinum Dovetail 10 Tablesaw BANDSAWS Laguna 14 Bandsaw 14 Twelve Laguna LT14 SUV Bandsaw Laguna 18 Bandsaw LT 18 3000 PLANERS
More informationCATALOGUE WOOD WORKING JET HAS 50 YEARS EXPERIENCE IN WOOD WORKING MACHINES SOLID CONSTRUCTION FOR ACCURACY AND LONG LIFE
Jet products are Swiss customised and built to a high standard of accuracy. Cast iron construction ensures a lifetime of reliable performance WOOD WORKING CATALOGUE JET HAS 50 YEARS EXPERIENCE IN WOOD
More informationPR I CES E F F ECT I VE J ANUARY 1, J UNE 3 0,
PR I CES E F F ECT I VE J ANUARY 1, 2 0 1 7 J UNE 3 0, 2 0 1 7 CNC : 4- Table Saws : 6-7 Sanders : 8-9 Bandsaws : 10-11 Wood Lathes : 12-13 Drill Press : 14 Mortisers : 1 SOCIAL STAY INVOLVED WITH POWERMATIC
More informationPAGE INDEX. Drill Press 10. Mortisers Dust Collector Sanders
PAGE INDEX Table Saws 2-3 CNC 4-5 Wood lathes 6-7 Bandsaws 8-9 Drill Press 10 Mortisers Dust Collector Sanders 11 12-14 15-16 Jointers 17-18 Planers 19 Shapers 20-21 NEW PM3000 14 TABLESAWS Quick release
More informationVISIT POWERMATIC.COM FOR MORE DETAILS
VISIT POWERMATIC.COM FOR MORE DETAILS PRICES EFFECTIVE JANUARY 1, 2018 JUNE 30, 2018 Table Saws : 4- CNC : 6-7 Sanders : 8-9 Bandsaws : 10-11 Wood Lathes : 12-13 Drill Press : 14 Mortisers : 1 SOCIAL STAY
More informationVISIT POWERMATIC.COM FOR MORE DETAILS
THE GOLD STANDARD SINCE 1921 VISIT POWERMATIC.COM FOR MORE DETAILS PRICES EFFECTIVE JANUARY 1, 2019 JUNE 30, 2019 NEW PM3000B 14" TABLESAWS Quick release riving knife lever for hassle free riving knife
More informationSAWS JET 10 Proshop Tablesaw JET 14 Industrial Bandsaw JET 18 Bandsaw PLANER/THICKNESSERS JPT260M Jet Combo Planer/Thicknesser JPT310 Jet Combo Planer/Thicknesser JML1014I Jet Combo Planer/Thicknesser
More informationRebates and Free Accessories on Select Items
s Effective: January 1 April 30, 2008 REBATE event 25 00 to 100 00 Rebates on Select Items Rebates and Free Accessories on Select Items Look inside for great deals on jointers, planers, dust collection
More information2015 Catalog The Measure of Precision
2015 Catalog The Measure of Precision FOR MORE INFORMATION VISIT www.deltamachinery.com ONE TEAM S DEDICATION For over 95 years, the same team dedication that created the innovation and quality of the
More informationA P P R O V E D $ Item (29 x 29 ) Reg. $320.00
PRINTED IN CANADA Prices are in effect from October 1 st, 2008 to February 28 th, 2009 WE RESERVE THE RIGHT TO CORRECT ANY TYPOGRAPHICAL AND PICTORIAL ERRORS WITHOUT NOTICE. Distributed by QUALIT Y A P
More informationWhitton Supply. Woodworking Machinery. Dovetailers Powermatic Tools DT45 Dovetailer 1HP 1Ph 115/230V. DT65 Dovetailer 1HP 1Ph 230V
Dovetailers Powermatic Tools DT45 Dovetailer 1HP 1Ph 115/230V Part # Style # of dovetail Center Min Work Piece Size Max Work Piece Size Lines PM1791304 Manual 3 7-7/8" x 2-3/8" 31" x 11" DT65 Dovetailer
More informationCOLLECTION 2014 WINTER-SPRING EDITION
WOODWORKING COLLECTION 2014 WINTER-SPRING EDITION FOR MORE INFORMATION VISIT JETTOOLS.COM Stand be h ind your work 5 5 0 + S er v ice C enters N a tionwide I N D U S T R Y - L E A D I N G W a rr a nt I
More informationCOLLECTION 2014 SUMMER-FALL EDITION
WOODWORKING COLLECTION 2014 SUMMER-FALL EDITION FOR MORE INFORMATION VISIT JETTOOLS.COM Stand behind your work 550+ Service Centers Nationwide INDUSTRY-LEADING WarrantIES Expert Technical Service TM the
More informationAluminum T-fence with 50 rails $1, RLK M1. reg. $2,
SPRING 25-200 M1 SUMMER 2012 Prices are in effect from March 1 st to August 31 st 2012 12 x 17 variable speed Maxi-Lathe VS + $799. 99 reg. $1,116. 00 5 pc hi-speed steel wood turning mini-chisel set (Item
More informationSTAND BEHIND YOUR WORK WOODWORKING 2018 SAVINGS JULY 1 - DECEMBER 31, 2018
WOODWORKING 2018 SAVINGS JULY 1 - DECEMBER 31, 2018 STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING WARRANTIES EXPERT TECHNICAL SERVICE 22" SCROLLSAW Upper blade holder clamps and
More informationWOODWORKING PASSION FOR. Only. Only. Only SEE PAGE 5 SEE PAGE 7 SEE PAGE 21 FOR MORE INFORMATION VISIT JETTOOLS.COM 2010 WORKSHOP SAVINGS EVENT
PRICES EFFECTIVE: MAY 1 - AUGUST 31, 2010 PASSION FOR WOODWORKING 2010 WORKSHOP SAVINGS EVENT FEED YOUR PASSION WITH EXCLUSIVE DEALS ON OVER 100 WOODWORKING TOOLS! 999 99 Stock No. 708524 SEE PAGE 7 599
More information50-200R M1 Aluminum T-fence rip fence system. $1, reg. $1, * Limited quantities, while supplies last
GENERAL T fence system* Made in Canada 0-200RC30 M1 General T fence system (F36T28) with 30 cutting capacity. $1,4. reg. $1,80. 00 0-EXBC10 $3. reg. $0. 00 0-200R M1 Aluminum T-fence rip fence system.
More informationCOLLECTION 2018 WINTER-SPRING EDITION
WOODWORKING COLLECTION 2018 WINTER-SPRING EDITION FOR MORE INFORMATION VISIT JETTOOLS.COM PRICES EFFECTIVE JANUARY 1ST - JUNE 30TH, 2018 STAND BEHIND YOUR WORK 550+ SERVICE CENTERS NATIONWIDE INDUSTRY-LEADING
More informationWORKSHOP COLLECTION. Now. Now 2011 FALL/ WINTER EDITION SEE PAGE 18 SEE PAGE 6 FOR MORE INFORMATION VISIT JETTOOLS.COM DUST COLLECTORS
W O O D W O R K I N G WORKSHOP COLLECTION 2011 FALL/ WINTER EDITION NEW! VORTEX CONE TM DUST COLLECTORS Now 699 99 Stock No. 708659K SEE PAGE 18 PRICES EFFECTIVE: September 1 - December 31, 2011 Now 549
More informationOLIVER MACHINERY. Revised 5/2017 $ Catalog 2017 Oliver Machinery
OLIVER MACHINERY $2.00 i Revised 5/2017 table of contents OLIVER HISTORY Tradition and Innovation... 1 MACHINES 2018 18 Classic Lathe... 2 4016 10 Table Saw... 3 4045 12 Table Saw... 4 4060 16 Table Saw...
More information25-200H. 12 Planer / Jointer. with Helical Cutterhead. Parts List.
25-200H 12 Planer / Jointer with Helical Cutterhead 4001824 Parts List www.rikontools.com CABINET ASSEMBLY PARTS EXPLOSION & PARTS LIST KEY NO. DESCRIPTION KEY NO. DESCRIPTION 1 Pan Head Screw M6x12 P25-200H-1
More informationPart # X axis Cap. Y Axis Cap Z Axis Cap. Spindle Speed G M1 13" 18" 3" RPM
CNC Machines General International 13" X 18" CNC Carving Machine Part # X axis Cap. Y Axis Cap Z Axis Cap. Spindle Speed G40-913 M1 13" 18" 3" 15000 RPM 15" X 20" CNC Carving Machine Part # X axis Cap.
More informationWORKSHOP COLLECTION $ $ NOW NOW 2012 WINTER WOODWORKING SPRING FOR MORE INFORMATION VISIT JETTOOLS.COM EDITION OSCILLATING
2012 WINTER SPRING EDITION WOODWORKING WORKSHOP COLLECTION OSCILLATING DRUM Sander $2399. 99 STOCK NO. 659006K SEE PAGE 13 Vortex cone dust collector $699. 99 STOCK NO. 708659K SEE PAGE 18 FOR MORE INFORMATION
More informationAgricultural Mechanics and Technology Power Tool Safety Rules
Agricultural Mechanics and Technology Power Tool Safety Rules Name: BAND SAW Use: Cutting curves, circles and irregular shapes. 1. Use clean SHARP blades. 2. The teeth should always point DOWN. 3. Adjust
More information23 WOODWORKING EQUIPMENT
23 WOODWORKING EQUIPMENT Chisel Mortiser Chisel mortiser... 1199 Cutting Machine Heavy duty band saw... 1197 Scroll saw... 1197 Dust Collector Dust collector... 1201 Overarm Router Overarm router... 1202
More informationGuild of Oregon Woodworkers Shop Safety Test
Guild of Oregon Woodworkers Shop Safety Test You must pass the Test with an 80% or better and self-correct it to 100% Make sure you put the answers under the correct portion of the answer sheet for the
More informationBAILEIGH INDUSTRIAL WOODWORKING MACHINERY
BAILEIGH INDUSTRIAL WOODWORKING MACHINERY Baileigh Industrial was founded in 1999 with the core principles of providing the highest quality industrial metalworking and woodworking machinery backed by unsurpassed
More informationBENCH MORTICER. Woodworking Equipment Bench Morticer with Sliding Table. trade level
BENCH MORTICER 01944 Bench Morticer with Sliding Table A compact bench mounted morticer giving high levels of accuracy, ease of use with industrial features at an affordable price. An important feature
More informationBAILEIGH INDUSTRIAL WOODWORKING MACHINERY
BAILEIGH INDUSTRIAL WOODWORKING MACHINERY Baileigh Industrial was founded in 1999 with the core principles of providing the highest quality industrial metalworking and woodworking machinery backed by unsurpassed
More information54A 6" DELUXE JOINTER WITH QUICK AUTO SET KNIVES
4 6" ELUXE JOINTER WITH QUIK UTO SET KNIVES FETURES 66" long adjustable infeed and outfeed beds mounted on dovetailed ways Features controlled chip cutterhead, a Powermatic exclusive, to control kick back
More informationMelamine Extension Table Kit OPTIONAL. EXT-5052 Comes with 2 support legs Fits: KC-10JCS, KC-24FXT & KC-26FXT $169.
gear up your workshop ULTRA-QUIET OIL-FREE AIR COMPRESSORS Light weight aluminum tank(s) 3.80 CFM @ 40 PSI 2.35 CFM @ 90 PSI Extra long pump life of over 3000 hours 120 PSI maximum tank pressure ASME safety
More informationRevised 8/1/2018 Page 1
1Guild of Oregon Woodworkers Shop Safety Test You must pass the Test with an 80% or better and self-correct it to 100%. Make sure you put the answers under the correct portion of the answer sheet for the
More informationgear up your workshop this NEW 5.8 Amp induction motor BELT & 8 DISC SANDER
gear up your workshop this $40 savings 14 WOOD CUTTING BANDSAW WITH RIP FENCE AND RESAW GUIDE KC-1433FXR 10 amp. motor 14 x 14 cast iron table 3 speeds (735-1470- 2350 FPM) Miter gauge Dust chute Hinged
More informationHornsby Woodworking Men s Shed. Guide to the Shed s Woodworking Machines
Guide to the Shed s Woodworking Machines SP00 Purpose The primary purpose of this document is to assist the induction of new members of the Hornsby Woodworking Men s Shed in the identification and understanding
More informationWOOD LATHES. Woodworking Equipment. sales hotline Wood Lathe 1 Metre Starter Kit Variable Speed Midi Wood Lathe Cast Iron
01488 Wood Lathe 1 Metre Starter Kit The heavy-duty ½hp induction motor gives smooth reliable performance and means this lathe is ideal for both spindle and faceplate turning. This machine is ideal for
More informationOperating Instructions and Parts Manual 10-inch Table Saw
Operating Instructions and Parts Manual 10-inch Table Saw Model 66 shown with optional extension table and legs, mobile base, and motor cover WMH TOOL GROUP 2420 Vantage Drive Elgin, Illinois 60123 Part
More informationSECTION 9: PARTS. Table Breakdown REF PART # DESCRIPTION REF PART # DESCRIPTION
SECTION 9: PARTS Table Breakdown 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 23 25 17 26 27 8 1 P0675001 CAP SCREW M8-1.25 X 30 15 P0675015 SUPPORT BLOCK 2 P0675002 TABLE SUPPORT BLOCK
More informationParts List Index No. Part No. Description Size Qty
Parts List Index No. Part No. Description Size Qty 1... TS-1541031...Lock Nut...M8... 4 2... JJP12-002...Washer... 4 3... JJP12-003...Outfeed Table Bracket Shaft... 1 4... JJP12-004...Outfeed Table Bracket,
More information$1149. $1099. * $1459. $1299. $599. $ $169. $79.99 $ WOOD CUTTING $259. $ x 18 VARIABLE SPEED
gear up your workshop Spring & summer 2015 $40 savings 12 x 18 VARIABLE SPEED WOOD LATHE KWL-1218VS Reliable single board computer microprocessor for precise control Precise spindle speed digital readout
More informationThe WoodWorker s Edge
The WoodWorker s Edge Draw-leaf Game Table 1. 2. Layout the area for the tenons. The tenons are 3/8 thick x 4-1/2 long x 1-1/4 deep and offset to the inside. Create the tenons using the step method to
More informationWoodworking Six Day Sales Event
Let s Get Woodworking Six Day Sales Event September 26 October 1 Your Best Selection and Prices on Woodworking Tools in Canada Dewalt Premium Compact Router c/w Plunge Base $259.95 $189.95 Dewalt 12V Max
More informationSAFETY INFORMATION PACKET
WILLOWCREEK MIDDLE SCHOOL SAFETY INFORMATION PACKET GENERAL SHOP SAFETY 1 WIDE BELT SANDER 2 BAND SAW 3 MITER SAW 4 UP- CUT SAW 4 PLANER 6 TABLE SAW 7 DRILL PRESS 8 LATHE 8 DISK / VERTICAL BELT SANDER
More informationInnovative woodworking machinery
MF30 Innovative woodworking machinery MOReTENs have been manufacturing woodworking machinery in Sweden for over 25 years. The innovative design of our machines is shaped by our customers needs, bringing
More informationM910 - Heavy Duty Wood Lathe 520mm Swing x 975mm Between Centres $4, $4, Product Brochure For W685. Features.
M910 - Heavy Duty Wood Lathe 520mm Swing x 975mm Between Centres Ex GST Inc GST $4,150.00 $4,565.00 ORDER CODE: W685 MODEL: M910 Swing Over Bed (mm): 520 Between Centres (mm): 975 Spindle Nose Thread:
More informationProject 17884EZ: Shaker End Table
Project 17884EZ: Shaker End Table With its clean, simple lines, this piece is unmistakably Shaker style. Ours is made from cherry, a wood commonly used by Shaker craftsman, but we ve also seen this piece
More informationPerfect Machines Center
+91-8048603597 Perfect s Center https://www.perfectmachinescentre.in/ We have emerged as an eminent manufacturer and distributor of workshop machinery like heavy duty lathe machines, universal milling
More informationKentwood M509X 5 Head Moulder
TECH SPEC MS 31513 PAGE 1 Kentwood M509X 5 Head Moulder The Kentwood M509X 5 Head through feed Moulder s heavy cast iron construction, tight tolerance spindle assemblies, rugged feed works, heavy duty
More informationMODEL H " BYRD SHELIX CUTTERHEAD INSTRUCTIONS
MODEL H9291 12" BYRD SHELIX CUTTERHEAD INSTRUCTIONS The Model H9291 12" Byrd Shelix cutterhead is designed to replace the straight-knife cutterhead on the Grizzly jointer Model G0609. The total procedure
More informationYale Practices for Tool Safeguarding and Controls 1
Arbor Press Manual Caught between crushing, limited by manual operation Band Saw / Small Bench Cutting blade lacerations Rotating blade pulleys pinch points, entanglement for wood Band Saw / Large Cutting
More informationGEAR UP YOUR WORKSHOP
GEAR UP YOUR WORKSHOP Fall & Winter 2016-2017 Brettwood Machinery Works Ltd. $40 savings 10 CABINET SAWS WITH RIVING KNIFE BLADE GUARD Table has T slots for miter gauge and beveled front edge Comes with
More informationHICKORY SAW & TOOL, INC.
HICKORY SAW & TOOL, INC. 406 9 th Street S.E., Hickory, N.C. 28602 P.O. Box 2407, Hickory, N.C. 28603 Telephone: (828) 324-5585 1-800-762-9899 Fax: (828) 324-5588 1-800-762-6845 www.hickorysawandtool.com
More informationWoodworking Machinery- Other than Saws Self-Inspection Checklist
Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Woodworking Machinery- Other than Saws Self-Inspection Checklist Guidelines: This checklist
More informationBUY PARTS ONLINE AT GRIZZLY.COM!
SECTION 9: PARTS Tables, Fence & Cutterhead 28 29 26 27 25 23 23 22 24 22 35 37 36 38 16 15 17 18 39 11 14 19 20 21 13 12 6 7 8 9 10 1 2 5 49 3 4 3 31 30 6 7 94 93 95 40 96 43 42 44 45 46 47 48 55 55-4
More informationCabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 FOLLOW RULES FOR WORKING IN THE CABINETMAKING LAB. 101 Review and discuss school rules. 102 Review and demonstrate knowledge of cabinetmaking lab rules. 103 Complete all theory
More informationWoodworking Machinery & Accessories.
Woodworking Machinery & Accessories www.rikontools.com POWER TOOLS Pro Tools for Tool Pros RIKON Power Tools is dedicated to designing and manufacturing woodworking machinery of the highest quality that
More informationSan Diego Fine Woodworkers Association Member Shop Safety Test
You must pass the Test with an 80% or better and self-correct it to 100%. Make sure you put the answers under the correct portion of the answer sheet for the test you are taking. Use the Guild Safety Answer
More informationCabinetmaking & Millwork CIP Task Grid
1 Secondary Task List 100 DEMONSTRATE PERSONAL SAFETY. 101 Demonstrate knowledge of general safety rules for working in the cabinetmaking lab. 102 Identify cabinetmaking lab tools and equipment. 103 State
More informationBACK TO WOODWORKING SALE 2018
BACK TO WOODWORKING SALE 2018 Now Serving the GTA PROUD OF 50 YEARS SERVING WOODWORKERS IN CANADA September 14 to October 10 While Quantities Last ALL INVENTORY IS ON SALE The only true helical portable
More informationTH E BE L S AW CO M PA N Y
BELSAW TH E BE L S AW CO M PA N Y 90 Karina Court San Jose CA 95131 Fax (408) 441-1222 http://www. b e l s aw. c o m Featuring the one & only Belsaw Planer/Molder, its parts, accessories and numerous other
More informationDOUBLE 13AMP BELT BEVEL LASER SUPPLY DRIVE ACTION GUIDANCE ITEM NO.
MITRE SAWS 01504 Sliding Compound Mitre Saw 12 / 305mm Double Bevel Action, Belt Drive A powerful saw with a 2000w belt driven motor for smoother, quieter operation and extended life. This 12 saw is ultra-versatile,
More informationanniversary event November 16 December 1 Canadian Woodworker Sponsors New Online Woodworking magazine
presents Chance to Win Dewalt 12" Miter Saw General 10" Right Tilt 3 hp Cabinet Saw W/ 50" T-Square Fence and Riving Knife $2,999.95 $2,499.95 anniversary event November 16 December 1 Canadian Woodworker
More informationAll prices are exclusive of VAT. Machinery
Machinery TSM100 SPINDLE MOULDER The TSM100 spindle moulder is a sturdily built machine complete with a flush mounted sliding table suitable for the modern joinery shop. n Cast, precision ground, steel
More informationWOODWORKING MACHINERY GUARDING
APPENDIX E WOODWORKING MACHINERY GUARDING The following requirements are restated from 29 CFR 1910.213, Woodworking machinery requirements. (a) Machine construction general. (1) Each machine shall be so
More informationALWAYS disconnect the power source before using the Betterley UNA-GAUGE with any power tool or machine!
Betterley UNA-GAUGE Thank you for purchasing the Betterley UNA-GAUGE. You will find the UNA-GAUGE provides quick adjustments and alignment of most tools and machinery with extreme accuracy. The versatile
More informationPOWERMATIC PWBS-14 Bandsaw
POWERMATIC PWBS-14 Bandsaw The versatility of the bandsaw has made it a favorite of woodworkers for decades. The POWERMATIC PWBS-14 Bandsaw was designed to be rugged, accurate and to bring a surprising
More informationRE-TOOL YOUR WOODWORKING SHOP
LEFT TILT Find us on: RE-TOOL YOUR WOODWORKING SHOP THIS SPRING & SUMMER 2019 Proudly Canadian 1983-2018 $40 savings STAND INCLUDED 10 CABINET TABLE SAWS Riving knife system for maximum operator safety
More informationRE-TOOL YOUR WOODWORKING SHOP
LEFT TILT Find us on: RE-TOOL YOUR WOODWORKING SHOP THIS SPRING & SUMMER 2019 Proudly Canadian 1983-2018 $40 savings STAND INCLUDED 10 CABINET TABLE SAWS Riving knife system for maximum operator safety
More informationMEMBER SHOP REFERENCE MANUAL
MEMBER SHOP REFERENCE MANUAL OF THE SAN DIEGO FINE WOODWORKERS ASSOCIATION 2018 Version 2.0 1 TABLE OF CONTENTS I. OVERVIEW --------------------------------------------3 1. GENERAL CAUSES OF ACCIDENTS
More informationRouter Table. In a recent article, I wrote about the router table I built for the Center. 5 Essential Jigs for the
5 Essential Jigs for the Router Table Great fixtures and fences offer better control and new possibilities BY PETER SCHLEBECKER In a recent article, I wrote about the router table I built for the Center
More informationThe new generation with system accessories. Made in Europe!
1 The new generation with system accessories. Made in Europe! Of cast iron, wide-legged prismatic guide. For vibration-free work even at high loads. Rear flange for mounting the mill/drill head PF 230.
More informationLT14 SUV 2011 Wood Magazine Overall Best Editor s Choice. LT16 HD 1998 American Woodworker Magazine Editors Choice Award
2011 CATALOG 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 LT14 SUV Bandsaws 3000 Bandsaws HD Bandsaws Bandsaw Blades Bandsaw Blades Tablesaws Tablesaws Jointers Planers Combination
More informationProject 13586EZ: Writing Desk. Writing Desk Materials List
Project 13586EZ: Writing Desk This writing desk will make a handsome addition to just about any room in the house. The one shown is made of cherry, a logical choice for a piece like this, but mahogany
More information2013 year-end. inventory clearance. While Quantities Last. March 9-30, PLUS It s the Great GIVEAWAY SALE EVERYTHING IN THE STORE IS ON SALE
2013 year-end inventory clearance BEST PRICES IN CANADA March 9-30, 2013 While Quantities Last PLUS It s the Great MACHINERY CASH GIVEAWAY SALE See inside for details Laguna 1 1/2 hp Portable Cyclone Dust
More informationA M Supply Co. Metalworking Machinery. Drill Presses Jet Tools J-2221VS 20" Variable Speed Drill Press 115/230V 1Ph
Drill Presses J-2221VS 20" Variable Speed Drill Press 115/230V 1Ph Part # Style Drills to Center Drilling Cap. Cast Drilling Cap. Mild Distance Column Circle Iron Steel to Spindle 354221 Variable 20" 1-1/4"
More informationFALL & WINTER 1 HP DUST COLLECTORS
FALL & Use what the Pros use! 2018 WINTER If you missed an episode of Holmes+Holmes, watch it on the HGTV Canada website: 1983-2018 Proudly Canadian DVR with Adaptive Control TM Software The Most Innovative
More informationSECTION 9: PARTS Fence & Cutterhead
(G0855 Only) (G0856 Only) SECTION 9: PARTS Fence & Cutterhead 1 2 3 4 65 6 5 23 111 111 7 27 130 131 132 133 136 134 135 117 12 40 8 9 13 10 9 14 15 8 11 18 25 29 63 19 20 21 17 22 28 26 26 24 40-3 40-2
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More informationSECTION 9: PARTS. G9860/G9860ZX Cabinet Breakdown & Parts List
MIN SECTION 9: PARTS G9860/G9860ZX Cabinet Breakdown & Parts List 9 33 34 5 11 237V4 236V2 10 23 32 17 12 13 16 POWER STOP 5000 15 14 17 31 27 35 30 17 26 3 1 33 34 1 P9860001 BASE 17 PS68M PHLP HD SCR
More informationLearning Objectives To be able to state the different safety precautions associated with the lathe. To be able to identify and state the function of t
Learning Objectives To be able to state the different safety precautions associated with the lathe. To be able to identify and state the function of the different parts of the lathe. To be able to identify
More informationMasterGage/Professional Manual
MasterGage/Professional Manual Getting control of all of your woodworking equipment with the powerful features of the MasterGage/Professional MasterGage Corporation, 560 N. Moorpark Road, Thousand Oaks,
More informationThe new generation with system accessories. Made in Germany!
1 The new generation with system accessories. Made in Germany! For face, longitudinal and taper turning, thread-cutting. For machining steel, brass, aluminium and plastic. Mounting flange for fastening
More information* $2299. * $2399. * $3759. $ $3499. $ $ $569. $849. $349. $ DADO BLADE SET 10 JOBSITE SAW WITH FOLDING STAND KC-5100C
Use what the Pros use! Fall & Winter 2017 If you missed an episode of Holmes+Holmes, watch it on the HGTV Canada website: Find us on: Facebook, Google+ & YouTube 2-4 dust chutes resaw FENCE * $1599. After
More informationOperating Instructions and Parts Manual 8-inch Parallelogram Jointer Model PJ-882 and PJ-882HH
Operating Instructions and Parts Manual 8-inch Parallelogram Jointer Model PJ-882 and PJ-882HH Powermatic 427 New Sanford Road LaVergne, TN 37086 Part No. M-1610079 Ph.: 800-274-6848 Revision F1 10/2015
More informationRYOBI 10 IN (254 MM) TABLE SAW MODEL NO. BT REPAIR SHEET
RYOBI 0 IN (2 MM) TABLE SAW MODEL NO. BT00- REPAIR SHEET 2 RYOBI 0 in. (2 mm) TABLE SAW - MODEL NO. BT00- FOR MITER TABLE ASSEMBLY, REFER TO FIGURE B FOR BLADE GUARD ASSEMBLY, REFER TO FIGURE E FOR RIP
More information4 dust chutes 18 ROLLING TOTE TOOL BAG. KC-18RTB 600 Denier water-resistant material for all weather use 18 storage pockets and 2 rear 89.
Spring & Use what the Pros use! 2018 Summer Find us on: Facebook, Google+ & YouTube 14 WOOD CUTTING BANDSAW WITH RIP FENCE AND RESAW GUIDE KC-1433FXR 10 amp. motor 14 x 14 cast iron table 3 speeds (735-1470-
More informationGRAND OPENING SALE CELEBRATING OUR NEW STORE
GRAND OPENING SALE CELEBRATING OUR NEW STORE VAUGHAN, ONTARIO Special 3-Day Event OCTOBER 19 21 ALL STORES ALL TOOLS ON SALE! While Quantities Last The Great Canadian Cash Giveaway See inside for details.
More informationPARTS Stand Breakdown
PARTS Stand Breakdown 35-5 35-2 35-4 63 1 2 3 4 5 35-1 35-3 36 37 38 39 35 34 33 32 30 28 6 7 8 21 29 23 22 27 26 25 24 42 43 44 45 46 47 9 10 62 61 60 51 11 59 19 18 12 12 13 58 14 57 15 56 55 54 53 52
More information1 of 6 9/2/2014 10:14 AM Units: Teacher: WoodTechIII, CORE Course: WoodTechIII Year: 2012-13 Measurement EQ 1: what is measurement? are me of the ways to measure? EQ 3: what type of measurement does the
More informationSägen Hobeln Fräsen. Thickness Planer T45 Surface Planer T54. Englisch
Sägen Hobeln Fräsen Thickness Planer T45 Surface Planer T54 Englisch The T54 Dynamic design - ideal handling. The T45 Quick and quiet for precise planing. 2 Page 4 Page 6 Do you want to plane quickly and
More informationHEAVY DUTY BENCH GRINDERS
HEAVY DUTY BENCH GRINDERS BGC-6 (240153) / BGC-8 (240154) Heavy duty construction for maximum service life CSA electrics for safety and reliability All ball bearing construction Steel wheel covers with
More informationWays to get the most out of your
5 Ways to get the most out of your router table When you mount a router on a table, you expand your shop s potential. To help you take advantage of this potential, we assembled five router table techniques
More informationNote: Parts without part numbers are for reference only and cannot be purchased individually.
Parts Ordering Replacement Parts To order parts or reach our service department, call 1-800-274-6848 between 7:30am and 5:30pm (CST), Monday through Friday. Having the Model Number and Serial Number of
More informationWORKSHOP EQUIPMENT inc GST ORDER CODE: B inc GST
WORKSHOP EQUIPMENT RNB40 NUT & BLIND RIVETER SET 130 piece kit suitable for sheet aluminium, steel & stainless Includes: Aluminium rivet nut inserts: M5, M6, M8, M10 - (10 of each size) Blind aluminium
More informationHELICAL SPIRAL CUTTERHEAD
HELICAL SPIRAL CUTTERHEAD Woodworking These true helical spiral cutterheads produce smooth surfaces on the toughest of woods. The unbelievable shear cutting not only greatly reduces the tearout of wood,
More informationRivolver 12" X 18" v.s. Wood Lathe $ $ Rikon 8 Slow Speed Bench Grinder $ $ SandX Bench Grinder Stand $99.95 $89.
2018 YEAR-END CLEARANCE PROUD OF 50 YEARS SERVING WOODWORKERS IN CANADA MARCH 9 31, 2018 While Quantities Last ALL INVENTORY IS ON SALE Bench Dog Pro Router Table Fence $229.95 $99.95 Rivolver 12" X 18"
More information