GARDEN SHED - WALESDimensions: 10x10 (1 1/8')"

Size: px

Start display at page:

Download "GARDEN SHED - WALESDimensions: 10x10 (1 1/8')""

Gervais Garrett
6 years ago
Views:

1 ASSEMBLY INSTRUCTIONS GARDEN SHED - WALESDimensions: 0x0 ( /8')" IMPORTANT Before beginning the assembly of your garden shed, please read the instructions carefully and follow them closely. By doing so you will avoid unnecessary problems and save time. It is recommended to start the assembly process only once all the

2 GARDEN SHED WALES 0x0 ( /8')" components of your shed identified have been identified, analyzed and classified. This notice also contains recommendations related to maintenance of your shed. What you need to know prior to assembly Characteristics of wood. Wood has a set of specific characteristics that are natural and inherent to it. Those characteristics include colour, density and the extent to which it is affected by humidity. Longitudinal cut, in most cases, will reveal a nice, decorative and often very appreciable look, which is called a texture. It should be added that wood has a specific smell, given by attars, resins and fermented substances, while freshly cut wood has a more pleasant scent. A very important attribute of timber is the ease with which it absorbs humidity. When timber dries, it shrinks. Similarly, when timber absorbs humidity, it increases in volume. Downsides. One of the downsides of timber is that it chaps and warps. When timber dries, the moisture firstly evaporates from the surface and outer layers and only then from the inside layers. Thus, when the outer layers start shrinking, the inside layers, due to stronger moisture, oppose to shrinking. Firstly the surface starts chapping, then the inside layers. When timber dries it can get a longitudinal warp or a cross warp. A longitudinal warp is when the drying straight balk bends, a flat plank twists and gets the form of the propeller. Wood has a set of specific technological characteristics. It easily splits along the fibre nicely holding metal fastenings; it can flex easily and is not very sensitive to depreciation. Screws hold timber extremely well. Screws have a much better grip with timber than nails. Taints: branchy timber, cracks, abnormal structure, infractions made by fungus or parasites. As timber is of biological origin, it is so varied that terms normal timber and abnormal timber are not strictly defined. Within the variety of sawn wood and sawn timber some taints due to fungus may occur: mould, brownness. Mould funguses generally do not affect physical and mechanical characteristics of timber.

GARDEN SHED WALES 0x0 ( /8')" When timber is affected by biological (fungus), physical (environmental temperature and humidity) and chemical factors, it decomposes.

3 GARDEN SHED WALES 0x0 ( /8')" When timber is affected by biological (fungus), physical (environmental temperature and humidity) and chemical factors, it decomposes. Timber may last a long time, but fluctuations in humidity and temperature of the environment reduces its longevity. A variety of cracks may emerge, which will then both damage the integrity of timber and will facilitate infection with (and rapid development of) fungus. Generally speaking, the older the wood, the better the durability of its lumber. The most effective way to protect wood from insects and decay is to soak it with substances which are toxic to fungus and insects. Protection. Assembling the shed should be carried out in dry weather conditions. If rain should start during the assembly process, wood should be covered. Once you have erected the shed, finish with a coat of paint or appropriate treatment. Foundation. Before erecting the shed it is important to make a firm and plain foundation, ideally using concrete, concrete slabs or concrete blocs. It is very important to have the foundation corners at right angles and completely level. As long as there remain any spaces in the wall between windows and doors, water can get into the shed. ATTENTION: You will find boards for hammering the wall-boards in the package. Do not hit the wall board using only the hammer. Please follow the instruction in the picture above or use a rubber hammer. 3

4 GARDEN SHED WALES 0x0 ( /8')" PREPARATION OF ASSEMBLY First, begin to form 0.3 x 0.3 inch square treated foundation beams (part no. a). a Treated foundation beam 0.3 x.36 x.57 Nicked lower starter front 7.3 x.6 x. wall-board Lower back wall-board 7.3 x.6 x. 3 Side wall-board 7.3 x.33 x (*) To form the core framework begin with a nicked lower front starter wall-board (part no. ), a lower back wall-board (part no. ) and side wall-boards (part no. 3) ensuring the lock of corners and positioning the groove of a wall-boards to the bottom and the tongue to the top.

5 GARDEN SHED WALES 0x0 ( /8')" ASSEMBLY OF WALLS Short front wall-board Front wall-board Intermediate front wallboard Back wall- board Short side wall- board Side Wall- board Side Wall- board 0.8 x.33 x x.33 x..6 x.33 x. 7.3 x.33 x x.33 x. 0.5 x.33 x x.33 x. 7 + (*) Continue with front wall-boards (part no., 5 and 6), back wall-boards (part no. 7), short side wall-boards (part no. 8) and side wall-boards (part no. 9 and 0) till the 6th level of side walls. 5

GARDEN SHED WALES 0x0 ( /8')" FINISHING OF WALLS 3 5 6 7 Window Window Side wall-boards Top wall-boards Lower strip of double door (horizontal) Side strip of double door (vertical) Top strip of

6 GARDEN SHED WALES 0x0 ( /8')" FINISHING OF WALLS Window Window Side wall-boards Top wall-boards Lower strip of double door (horizontal) Side strip of double door (vertical) Top strip of double door (horizontal) QUANTIT Y x x x.33 x x 5.5 x x.95 x x 3.5 x x 3.5 x.5 It is time to install (slide in) window (part no. and ) and continue mounting walls with wall-boards (part no. 3 and ). Top wall-boards fix to the crossing of wall boards with 0.9x.75 inch screws. When the walls are finished you can put in the double door (part no. 8). First build the frame for the double door made from the lower strip of the door (part no. 5), the side strip of the door (part no. 6) and the top strip of the door (part no. 7) with 0.9x3.5 inch screws, at each corner and slide it in the space created. 6

7 GARDEN SHED WALES 0x0 ( /8')" MOUNTING THE GABLE 8 9 Double door Gable x x.65 x. + After having built the frame, you can position the double door (part no. 8) in the space created. Now, you can fasten the frame of the double door into front wall boards with eight 0.5x.96 inch screws, at each side. Mounting prefabricated gables (part no. 9) above top wall-boards. 7

GARDEN SHED WALES 0x0 ( /8')" ASSEMBLING ROOF BEAMS Fixing of protective wind studs Pick.

Fix the protective wind studs to the lower wallboard with a 0.5x.5 inch screw.

6 When the gable is well positioned, the beams (part no. 0 and ) can be put into place.

8 GARDEN SHED WALES 0x0 ( /8')" ASSEMBLING ROOF BEAMS Fixing of protective wind studs Pick. Fix the protective wind studs to the gable with 0.3x.3 inch screw in the middle of groove Pick. Fix the protective wind studs to the lower wallboard with a 0.5x.5 inch screw. 0 Beam Central beam Protective wind studs x 5.5 x x 5.5 x x.57 x 0.6 When the gable is well positioned, the beams (part no. 0 and ) can be put into place. Please fix them to the gable with 0.9x.75 inch screws. Strengthen the construction with the protective wind studs (part no. ) as shown in the picture and. 8

9 GARDEN SHED WALES 0x0 ( /8')" INSTALLING THE ROOF BOARD 3 Roof board 6.96 x 3.3 x (*) Before installing the roofing, ensure that walls are quite right and nail roof boards (part no. 3) from face side to the back side. If needed, cut the last roof board to due width. Attention! If you are assembling your shed during prolonged dry weather conditions, it is recommended to leave a gap of about /6 inch between each roof board, thus allowing wood to take its normal position in wet period. 9

GARDEN SHED WALES 0x0 ( /8')" INSTALLING FASCIA 5 6 Fascia Roof decoration Roof end boards 66.53 x 3.5 x 0.7 8.66 x 3.93 x 0.7 78.3 x.57 x 0.

10 GARDEN SHED WALES 0x0 ( /8')" INSTALLING FASCIA 5 6 Fascia Roof decoration Roof end boards x 3.5 x x 3.93 x x.57 x 0.63 After installing the chosen roofing, fix fascia (part no. ) to the sides of roofing and decoration (part no. 5) with screws as shown in the image above. Roof end boards (part no. 6) should be fixed to ends of roof boards to the bottom side. 0

11 GARDEN SHED WALES 0x0 ( /8')" INSTALLING THE FLOOR 7 Floor board 8 Baseboard 7.65 x 3.3 x x 3.3 x x. x x. x (*) 33 + (*) Floor boards (part no. 5) are fitted last, with nails provided. Finish floor installation with baseboards (part no. 6). We hope you are going to enjoy the assembly of your garden shed and wish you a pleasant work experience.

GARDEN SHED WALES 0x0 ( /8')" LIST OF ALL PARTS OF THE GARDEN SHED POSITI ON a 3 5 6 7 8 9 0 3 5 6 7 8 9 0 3 5 6 7 8 units units 8 units Treated foundation beam Nicked lower starter front wall-board

12 GARDEN SHED WALES 0x0 ( /8')" LIST OF ALL PARTS OF THE GARDEN SHED POSITI ON a units units 8 units Treated foundation beam Nicked lower starter front wall-board Lower back wall-board Side wall-board Short front wall-board Front wall-board Intermediate front wall-board Back wall- board Short side wall- board Side Wall- board Side Wall- board Window Window Side wall-boards Top wall-boards Lower strip of double door (horizontal) Side strip of double door (vertical) Top strip of double door (horizontal) Double door Gable Beam Central beam Protective wind studs Roof board Fascia Roof decoration Roof end boards Floor board Baseboard BOLTS Protective wind studs (Ø 0.3x.3inch) (Ø 6x60mm) Protective studs (Ø M6) Protective studs (Ø M6) 58 units wind 0 units wind units 0.3 x.36 x x.6 x. 7.3 x.6 x. 7.3 x.33 x. 0.8 x.33 x x.33 x..6 x.33 x. 7.3 x.33 x x.33 x. 0.5 x.33 x x.33 x x x x.33 x x 5.5 x x.95 x x 3.5 x x 3.5 x x x.65 x x 5.5 x x 5.5 x x.57 x x 3.3 x x 3.5 x x 3.93 x x.57 x x 3.3 x x 3.3 x x. x x. x (*) (*) (*) 33 + (*) 33 + (*) NAILS Roof board, floor board, baseboard (Ø 0.08 x.57 inch) (Ø x 0mm) SCREWS Roof decoration, fascia, protective wind stud, finish door and window (Ø 0.5x.5 inch) (Ø x0mm) Top wall-board, beam (Ø 0.9x.75 inch) (Ø 5x70mm) Roof and boards (Ø 0.x. inch) (Ø 3x30mm) 60 units Strips of double door (Ø 0.9x3.5inch) 8 units (Ø 5x90mm) *The number in brackets shows the number of existing spare details.

GARDEN SHED OPTIMA 328Dimensions: 12x8; 10; 12 (1 1/8')"

GARDEN SHED OPTIMA 328Dimensions: 12x8; 10; 12 (1 1/8') ASSEMBLY INSTRUCTIONS GARDEN SHED OPTIMA 38Dimensions: x8; 0; ( /8')" IMPORTANT Before beginning the assembly of your garden shed, please read the instructions carefully and follow them closely. By doing