Firefighter Firefighter Chapter 2: Firefighter Safety & Health 2.10 Safety with Tools and Equipment and Safety In Training - Part 1
|
|
- Randolph Julius Hicks
- 6 years ago
- Views:
Transcription
1 Firefighter Firefighter Chapter 2: Firefighter Safety & Health 2.10 Safety with Tools and Equipment and Safety In Training - Part 1 ICan2Ed, Inc. A firefighter should always follow safety procedures when using tools. The use of PPE (personal protective equipment) reinforces fundamental safe work practices, as well as following s p when using hand and power tools. Unpowered tools are the most common tool type, designed to be carried and used by one person, although some may require two people. Unpowered tools require following s p when using hand tools. Examples of u t include: Pike poles, sledge hammers, flat-head and pickhead axes, claw hammers and roofing hammers, picks, shovels, bolt and wire cutters, pry bars, halligans, and battering rams. Power tools can cause life-threatening injuries if used improperly. Do not operate p t unless you have read and fully understand manufacturer s instructions. Only trained, authorized personnel should repair p t, and maintain the repair log, which documents all repairs and the name of person performing the repair. should have a three prong plug, which should never be bypassed or removed. Any power tool not marked double insulated should have a t p p, connected to the electrical ground while in use. 1
2 Following the safety rules for both unpowered and power tools will help to prevent injuries. An important s r for each firefighter is to inspect and clean the tools used and put all tools in a ready state before storing. Wear appropriate PPE (personal protective equipment). Remove loose clothing and keep long hair clear of operating tool heads. Remove jewelry, including rings and watches. Follow manufacturer s instructions. Inspect tools before use to determine condition. Do not use badly worn or broken tools. Provide adequate storage space for tools and always return promptly after use. Get approval of manufacturer before modifying any tool. Use intrinsically safe tools when working in potentially flammable atmospheres, such as around a vehicle s fuel system. 2
3 Do not remove safety shields or compromise built-in safety devices. There are additional safety rules for the use of power saws. S r to prevent accidents with power saws includes keeping blades and cutting chains well sharpened. Choose right type of saw for task. Never force beyond its design limitations. Wear proper protective equipment, including gloves and vision and hearing protection. Remove loose clothing and contain long hair that could become entangled in the saw. 3
4 Have hoselines in place when cutting materials that generate sparks. Never use a power saw in a potentially flammable atmosphere. Keep bystanders out of work area. Follow manufacturer s procedures for proper saw operation. Allow gasoline-powered saws to cool before refueling. Use extreme caution when operating any saw above eye level. S r to prevent accidents with power saws includes keeping blades and cutting chains well sharpened. 4
5 Review S r to prevent accidents with power saws includes keeping blades and cutting chains well sharpened. 5
ATV Adjustable Drag Harrow
ATV Adjustable Drag Harrow OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationSAFETY AND OPERATING MANUAL. Hedge Trimmer WG205E WG206E WG207E WG208E
SAFETY AND OPERATING MANUAL 2 PRODUCT SAFETY GENERAL Power Tool Safety Warnings WARNING: Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or
More informationCHAPTER HAND TOOLS HAND TOOLS SAFETY Lesson - 4 pages. Hand Tools
CHAPTER HAND TOOLS HAND TOOLS SAFETY Lesson - 4 pages Hand Tools Learning Objectives HAND TOOLS SAFETY After completing this station, participants should be able to: 1. Identify an unsafe tool. 2. Understand
More information8-Ton Manual Splitter OWNER S MANUAL
8-Ton Manual Splitter OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL 2 General Power Tool Safety Warnings WARNING: Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire
More information60" 3pt Pine Straw Rake
60" 3pt Pine Straw Rake OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationWoodyWood Inc. Hand and Power Tools Pre-use Inspection Checklist. conducted for. Location Ambada Rd, Ambada, Madhya Pradesh , India
Hand and Power Tools Pre-use Inspection Checklist conducted for WoodyWood Inc. Location Ambada Rd, Ambada, Madhya Pradesh 480334, India Conducted on 18 May 2018 06:34 AM Prepared by Andy Singh Completed
More informationOPERATION & MAINTENANCE INSTRUCTIONS
FOOT OPERATED 1.5 TONNE LOG SPLITTER MODEL NO: LOGBUSTER 10 PART NO: 3402046 OPERATION & MAINTENANCE INSTRUCTIONS LS0815 INTRODUCTION Thank you for purchasing this CLARKE Foot Operated 1.5 Tonne Log Splitter.
More informationPRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE
PRODUCT MANUAL 5-IN-1 MITER SAW STATION *SAVE THIS MANUAL FOR FUTURE REFERENCE 92778 1 GENERAL SAFETY INFORMATION For your safety, please read these instructions carefully before use and keep them in the
More informationLandscape Drag OWNER S MANUAL
Landscape Drag OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More information3pt 60 Spike Aerator OWNER S MANUAL
3pt 60 Spike Aerator OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationATV CULTIVATOR OWNER S MANUAL
ATV CULTIVATOR OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may
More informationATV Disc OWNER S MANUAL
ATV Disc OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationImpact Wrench MODEL TW1000. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH Impact Wrench MODEL TW000 00605 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More information48" Wide Landscape Rake
48" Wide Landscape Rake OWNER S MANUAL WARNING: Carefully read and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationImpact Wrench. 19 mm (3/4 ) MODEL 6906
Impact Wrench 9 mm (3/4 ) MODEL 6906 002290 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationObjectives. Understand the association between specific tools and special entry needs.
Forcible Entry Objectives Understand the association between specific tools and special entry needs. Describe the basic construction of typical doors, windows, and walls. Know the dangers associated with
More informationGeneral Safety. Start with a Safe Work Area. Rules about Extension Cords. Electricity can be Dangerous. Good Personal Safety is a Must
General Safety All power tools can be dangerous if both general and tool specific safety instructions are not followed carefully. General safety instructions apply to all power tools, both corded and cordless.
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DS4012 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Drill DS402 05402 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model DS402 Capacities Steel 3 mm Wood
More information8 TONNE LOG SPLITTER
8 TONNE LOG SPLITTER MODEL NO: LOGBUSTER 9 PART NO: 3402043 OPERATION & MAINTENANCE INSTRUCTIONS LS03/16 INTRODUCTION Thank you for purchasing this CLARKE 8 Tonne Log Splitter. Before attempting to use
More informationULTRA CUTTER PRO OPERATORS INSTRUCTION MANUAL. This manual covers all models 9, 11 and 13 HP
ULTRA CUTTER PRO OPERATORS INSTRUCTION MANUAL This manual covers all models 9, 11 and 13 HP Per OSHA 1926.503 it is the machine owner s responsibility to ensure that all workers using this Ultra Cutter
More informationINSTRUCTIONS & PARTS LIST FOR 270A, 270A-2, & 270A-4 SIOUX RIVET HAMMERS (SERIAL D)
Form Z489 Date 2009August8/C Page 1 of 4 INSTRUCTIONS & PARTS LIST FOR 270A, 270A-2, & 270A-4 SIOUX RIVET HAMMERS (SERIAL D) Read and understand these instructions before operating this tool. SAVE THESE
More informationPLANISHING HAMMER STAND OWNER S MANUAL
PLANISHING HAMMER STAND OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious
More informationChapter 17. Forcible Entry
Chapter 17 Forcible Entry Introduction 2 ½ million homes broken into each year Owners install a variety of locking devices to protect both homes and businesses Forcible entry often one of the first operations
More informationLumber Smith. Owners Manual. If you are having problems assembling the saw and need assistance, please contact us at:
Lumber Smith Owners Manual If you are having problems assembling the saw and need assistance, please contact us at: 804-577-7398 info@lumbersmith.com 1 General Safety Instructions Failure to follow these
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL Impact drill WX317 WX318 1 3 2 8 7 6 5 4 A1 A2 B C1 2 1 3 3 1 D C2 5 4 E F 2 E F 1 G 4 2 H 1. Keyless Chuck 2. Depth gauge 3. Drill/hammer drill function selector 4. Switch
More informationOXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE
OXDALE PRODUCT LTD OPERATING AND MAINTENANCE MANUAL TM400 AND TM400 BIG BASE LOG SPLITTER KEEP FOR FUTURE USE 1 CONTENTS Safety 3 Labels 5 Quick Guide 6 In Depth Instructions 8 Operating Instructions 12
More informationATBG280/6 Bench Grinder Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size
Bench Grinder ATBG280/6 230V-50Hz 280 Watt 150mm x 25mm Wheel size SPECIFICATIONS Model Number : ATBG280/6 Nominal Voltage Power Consumption No load speed Wheel size Weight 230Volt 50Hz 280 Watts 2880
More informationASSEMBLY INSTRUCTIONS (CONTINUED)
ASSEMBLY INSTRUCTIONS (CONTINUED) BEFORE EACH USE DO THE FOLLOWING: 1. Make sure all bolts, fittings, and hoses are tight. If fittings are not tight, log splitter will not function properly. 2. Make sure
More informationD165A Z3040 X 10 RADIAL DRILL INSTRUCTION & PARTS MANUAL
D165A Z3040 X 10 RADIAL DRILL INSTRUCTION & PARTS MANUAL 8-11-11 General Machinery Safety Instructions Machinery House requires you to read this entire Manual before using this
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Drill DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Drill 64 642 643 007894 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 64 642 643 Capacities Steel
More informationACREAGE SEEDER / PLANTER OWNER S MANUAL
ACREAGE SEEDER / PLANTER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions
More informationHAND AND POWER TOOLS
USA office: 511 Avenue of America s, # 601, New York, NY 10011 Canada office: 655-32 nd Avenue, Suite 201, Lachine, QC., Canada, H8T 3G6 tel.: 514 634 3434 - fax: 514 634 9736 All PFI Standards and Best
More informationULTRA CUTTER MINI SAW
ULTRA CUTTER MINI SAW OPERATORS INSTRUCTION MANUAL Per OSHA 1926.503 it is the machine owner s responsibility to ensure that all workers using this Ultra Cutter Mini Saw are thoroughly trained in its use
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Curved Planer 1002BA DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Curved Planer 00BA 0059 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 00BA Planing width 0 mm Planing
More information6 BENCH GRINDER. Model ASSEMBLY AND OPERATING INSTRUCTIONS
6 BENCH GRINDER Model 90003 ASSEMBLY AND OPERATING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our Web site at: http://www.harborfreight.com Copyright 2003 by Harbor Freight Tools.
More informationL A M I N AT E F L O O R C U T T E R OWNER S MANUAL
L A M I N AT E F L O O R C U T T E R OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationSkillsUSA California COMPETITION CHAIRMEN: SCOPE OF THE COMPETITION: Please refer to the SkillsUSA Championships Technical Standards.
SkillsUSA California COMPETITION CHAIRMEN: SCOPE OF THE COMPETITION: Please refer to the SkillsUSA Championships Technical Standards. JUDGING CRITERIA: Please refer to SkillsUSA Championships Technical
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Drill MT600 MT601 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Drill MT600 MT60 003635 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model MT600 MT60 Capacities Steel
More informationTools Hand and Power. OSHA Office of Training and Education 1
Tools Hand and Power 1 Hazards Workers using hand and power tools may be exposed to these hazards: objects that fall, fly, are abrasive, or splash harmful dusts, fumes, mists, vapors, and gases frayed
More informationROTARY HAMMER OWNER'S MANUAL
ROTARY HAMMER OWNER'S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal
More informationBENCH GRINDER OWNER S MANUAL
BENCH GRINDER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationHedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850.
Operator s manual Manual d utilisation Manual de instrucciones Hedge Trimmer Attachment HA 110 HA 850 Complément Taille-haie HA 110 HA 850 Tijeras cortasetos (suplemento) HA 110 HA 850. GB English FR ES
More informationDrill INSTRUCTION MANUAL. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE 1 REFERENCE.
ENGLISH (Original instructions) INSTRUCTION MANUAL Drill 6411 6412 6413 007894 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE
More informationImpact Wrench WR 22SA HANDLING INSTRUCTIONS. Read through carefully and understand these instructions before use.
Impact Wrench WR 22SA HANDLING INSTRUCTIONS Read through carefully and understand these instructions before use. 1 1 2 2 3 4 5 3 6 7 8 9 5 3 4 kg-m 80 N m 800 M22 70 (F 10T) 0 C 70 700 60 50 600 500 40
More informationMODEL C-71-5 TWO-MAN EARTH DRILL
DO NOT THROW AWAY IMPORTANT MANUAL MODEL TWO-MAN EARTH DRILL Operator s Manual P.O.BOX 290 San Bernardino, CA. 92402 Phone (909) 478-5700 Fax (909) 478-5710 (800) 922-4680 E-mail: sales@groundhoginc.com
More informationHedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) Operator s manual Manual d utalisation Manual de instrucciones
HÄcksaxtillsats HA110 HA850 Jonsered Hedge Trimmer Attachment Complément Taille-haie Tijeras cortasetos (suplemento) GB FR ES Operator s manual Manual d utalisation Manual de instrucciones KEY TO SYMBOLS
More informationElectric Chainsaw Sharpener
FPP CHAINSS Electric Chainsaw Sharpener Instruction Manual For your own safety, please ensure you have read these instructions before use and have fully understood all the safety guidelines. Specifications
More informationHandling instructions
Hand Shear Model CE 16SA Handling instructions Note: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that
More informationSAFETY DIRECTIVE 2.0 DEPARTMENTS AFFECTED. This Administrative Directive shall apply to all Town of Marana departments and employees.
SAFETY DIRECTIVE Title: Hand and Power Tools Issuing Department: Town Manager s Safety Office Effective Date: July 1, 2014 Approved: Gilbert Davidson, Town Manager Type of Action: New 1.0 PURPOSE This
More informationNorth Dakota State University Power Tool Operations and Maintenance
North Dakota State University Power Tool Operations and Maintenance I. Introduction This NDSU procedure provides guidelines for the use of power tools. The intent is to establish proper safety procedures
More informationCOJSAWBX Electric Jig Saw Assembly & Operating Instructions
COJSAWBX Electric Jig Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation and maintenance.
More informationSafeguarding Machinery
Safeguarding Machinery Safeguards are essential for protecting workers from preventable injuries caused by moving machine parts. Any machine part, function, or process that may cause injury must be safeguarded.
More informationHedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850
Operator s manual Manual d utalisation Manual de instrucciones Hedge Trimmer Attachment HA110 HA850 Complément Taille-haie HA110 HA850 Tijeras cortasetos (suplemento) HA110 HA850 GB FR ES KEY TO SYMBOLS
More informationGT Series Grooving Tool
GT Series Grooving Tool Tube & Pipe Cleaners Tube Testers Tube Plugs Tube Removal Tube Installation Operating and Maintenance Instructions www.elliott-tool.com TABLE OF CONTENTS Introduction... 4 Safety
More informationGeneral Safety. Start with a Safe Work Area. Rules about Extension Cords. Electricity can be Dangerous. Good Personal Safety is a Must
General Safety All power tools can be dangerous if both general and tool specific safety instructions are not followed carefully. General safety instructions apply to all power tools, both corded and cordless.
More informationSaw Mill OWNER S MANUAL
Saw Mill OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 14 Forcible Entry Forcing Doors Revised
Truck Module Page 1 of 14 OPENING DOORS The method used to force a swinging door is determined evaluating three factors: How the door is Hung Type of Construction Locking mechanism Before attempting to
More informationChicken Coop OWNER S MANUAL
Chicken Coop OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result
More informationChapter 11 Test. Directions: Write the correct letter on the blank before each question.
Chapter 11 Test Name: Date: Directions: Write the correct letter on the blank before each question. Objective 1: Explain the basic principles of forcible entry. 1. Which of the following statements about
More informationSkillsUSA California Carpentry 2019 Regional Competition SCOPE OF THE COMPETITION:
SkillsUSA California Carpentry 2019 Regional Competition SCOPE OF THE COMPETITION: - Knowledge Performance The contest will include a written test that assesses the knowledge of carpentry including but
More informationPOTENTIAL HEALTH & SAFETY HAZARDS
Number: OH&S 18.48.1 Revision Date: 01/14/2015 Safe Operating Procedures for RIDGID 535 1. PURPOSE 1.1. To provide operational guidelines on the safe us of the RIGID 535 Pipe Threader used in the Trades
More informationOperating Manual 6 Industrial Bench Grinder ATBG280/
Operating Manual 6 Industrial Bench Grinder ATBG280/6 804531 40 Year Australian Heritage The reputable name in bench grinders for 40 years Protect yourself and others by observing all safety information,
More informationMAKER LAB Safety Instructions Power Tool Training
MAKER LAB Safety Instructions Power Tool Training Note: All the instructions from Basic Training apply to Power Tool Training. If you have not completed Basic Training, do so before you complete Power
More informationOperating and Maintenance Instructions Keep for future reference
Operating and Maintenance Instructions Keep for future reference TM400 Log Splitter 1 Index SAFETY... 3 LABELS.... 4 QUICK GUIDE including storage and transport... 5 IN-DEPTH INSTRUCTIONS.... 6 OPERATING
More informationEJ-16 EXTREMA MACHINERY COMPANY, INC. P.O. BOX 1450, ALBANY, LOUISIANA (877) FAX (225)
EJ-16 EXTREMA MACHINERY COMPANY, INC. P.O. BOX 1450, ALBANY, LOUISIANA 70711 (877) 398-7362 FAX (225) 567-2966 GENERAL SAFETY RULES There is a certain amount of hazard involved with the use of woodworking
More informationAngle Grinder MODEL 9553B MODEL 9555B
ENGLISH Angle Grinder MODEL 9553B MODEL 9555B 006649 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR
More informationBB Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT.
BB07552 5 Inch Double Cut Saw Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.
More informationOwner s Manual LOG SPLITTER. Read this manual. Serious injury or death can result if safety instructions are not followed.
YOUR LOG SPLITTER Owner s Manual www.timberchamp.com 7 TON KINETIC LOG SPLITTER Model No. 4008019 ASSEMBLY & OPERATING INSTRUCTIONS 15000 W 44th Avenue Suite B. Golden, CO 80403 Customer Service: 720-437-7640
More informationSAFETY AND OPERATING MANUAL
SAFETY AND OPERATING MANUAL BladeRunner X2 WX572 9 10 8 11 5 7 12 6 20 1 2 4 3 14 13 15 A2 A1 17 18 B2 B1 1 2 1 2 19 B3 3 4 2 C 1 D1 D1 C 2 1 E1 D2 1 2 E2 1 2 F G1 G1 F OFF ON G2 G3 H1 H2 I1 I2 I1 I2 J
More informationOPERATOR S MANUAL FOR MODEL BLADE GRINDER
OPERATOR S MANUAL FOR MODEL 88-021 BLADE GRINDER Table of Contents Page Blade Grinder Safety and User Instructions 2 Unpacking the Grinder 5 Assembling the grinder 6 Adjusting the grinding angle 8 Adjusting
More informationSTUDENT/FACULTY MACHINE SHOP SAFETY RULES
STUDENT/FACULTY MACHINE SHOP SAFETY RULES Supervisors have full authority over the shop and its safe use, including the responsibility, authority, and obligation to prohibit shop or tool access for the
More informationInstruction Manual. Manual de instrucciones. Guide d utilisation ET PMET Rev 808
Instruction Manual Manual de instrucciones Guide d utilisation ET2025 PMET2025-8 Rev 808 www.arrowfastener.com GENERAL SAFETY RULES WARNING! Read all instructions. Failure to follow all instructions listed
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Hammer Drill HP1630 HP1631 DOUBLE INSULATION. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Hammer Drill HP630 HP63 008892 DOUBLE INSULATION IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model HP630 HP63 Concrete
More information2-in-1 AIR TANK AND BEAD BLASTER OWNER S MANUAL
2-in-1 AIR TANK AND BEAD BLASTER OWNER S MANUAL WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
More informationCHALLENGER. User s Manual and Operating Instructions
The CHALLENGER Forcible Entry Training Door Simulator By IT S MORE THAN JUST A DOOR User s Manual and Operating Instructions Model # BM-DR1-14 Warning: Users of this equipment risk injury to themselves
More informationLOG SPLITTER MODEL NO: LOGBUSTER 8 OPERATION & MAINTENANCE INSTRUCTIONS PART NO: LS1113
LOG SPLITTER MODEL NO: LOGBUSTER 8 PART NO: 3402042 OPERATION & MAINTENANCE INSTRUCTIONS LS1113 INTRODUCTION Thank you for purchasing this CLARKE Log Splitter. Before attempting to use this product, please
More informationOperation & Instruction Manual
Operation & Instruction Manual Model BNCE-20 SN# 120Volt Corded Saw Keep this booklet and enter your tool serial number in the appropriate space above. BNCE-20_Operations_Manual_2017.indd ~ Page 1 ~ Instruction
More informationImpact Wrench MODEL 6905B MODEL 6906
ENGLISH Impact Wrench MODEL 6905B MODEL 6906 005305 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR
More informationImpact Wrench WR 16SA
Impact Wrench WR 16SA HANDLING INSTRUCTIONS Read through carefully and understand these instructions before use. 1 1 2 2 3 4 5 6 3 7 8 9 5 3 0 4 (kg-m) 30 20 C 10 M16 55 (F10T) A 0 0 2 4 6 8 10 (s) B 5
More informationSHOP SAFETY AND TRAINING IN ACADEMIC DEPARTMENTS
Page 1 of 6 SHOP AND TRAINING IN ACADEMIC DEPARTMENTS 1. All students and employees (staff and faculty) are required to complete documented safety training prior to using any machines or power tools in
More informationPORTABLE HALOGEN WORK LIGHT OWNER S MANUAL
PORTABLE HALOGEN WORK LIGHT OWNER S MANUAL L-9001 (29278) L-9002 (29276) WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules
More information2-Speed Hammer Drill HP2000 HP2020
2-Speed Hammer Drill HP2000 HP2020 SPECIFICATIONS Model HP2000 HP2020 Speed High Low High Low Capacities Concrete 20 mm 20 mm Steel 6.5 mm 13 mm 6.5 mm 13 mm No load speed (min 1 ) 0 2,300 0 900 2,300
More informationLOG SPLITTER 4-WAY WEDGE
swisherinc.com OWNER S MANUAL MODEL NO. STARTING SERIAL #: L112-195001 18840 Compatible with all Swisher log splitter except those supplied with permanent log strippers or other features that will interfere
More informationConcrete Planer PC5000C PC5001C INSTRUCTION MANUAL
ENGLISH (Original instructions) INSTRUCTION MANUAL Concrete Planer PC5000C PC500C 00989 DOUBLE INSULATION WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR
More informationTable of Contents General Information General Safety Summary Description & Features.. 6. Initial Set-up.. 9
Table of Contents Page Table of Contents.... 2 General Information... 3 General Safety Summary... 4 Description & Features.. 6 Guillotine Operation Initial Set-up.. 9 Decapitating the Animal 9 Maintenance
More informationCircular Saw MODEL MT581. WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ENGLISH Circular Saw MODEL MT58 005337 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
More informationMATERIALS: ASSORTMENT OF HAND TOOLS AND POWER SAWS ACQUIRED STRUCTURE OR FORCIBLE ENTRY PROPS
INSTRUCTOR GUIDE TOPIC: BACK TO BASICS: EFFECTIVE FORCIBLE ENTRY TIME REQUIRED: THREE HOURS MATERIALS: ASSORTMENT OF HAND TOOLS AND POWER SAWS ACQUIRED STRUCTURE OR FORCIBLE ENTRY PROPS REFERENCES: ESSENTIALS
More informationDrill 13 mm (1/2 ) MODEL 6302H
Drill 3 mm (/2 ) MODEL 6302H 3 mm (/2 ) MODEL 6303H INSTRUCTION MANUAL Variable speed / Reversing Variable speed / Reversing DOUBLE INSU LATlO N SPECIFICATIONS Steel Wood (RPM) 6302H I 3 mm (/2 ) I 36
More informationi sburgh COMPACT BENDER ASSEMBLY INSTRUCTIONS & PROJECT IDEAS Rev 08/00
i sburgh COMPACT BENDER 31980 ASSEMBLY INSTRUCTIONS & PROJECT IDEAS 2000 Rev 08/00 THANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please complete the owner s record below:
More informationEJ-12 EXTREMA MACHINERY COMPANY, INC. P.O. BOX 1450, ALBANY, LOUISIANA (877) FAX (225)
EJ-12 EXTREMA MACHINERY COMPANY, INC. P.O. BOX 1450, ALBANY, LOUISIANA 70711 (877) 398-7362 FAX (225) 567-2966 GENERAL SAFETY RULES There is a certain amount of hazard involved with the use of woodworking
More information18 GAUGE ELECTRIC METAL SHEAR
241-9895 18 GAUGE ELECTRIC METAL SHEAR Operator s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in
More information1/4in. SHEET PALM SANDER
1/4in. SHEET PALM SANDER OPERATING INSTRUCTIONS SPECIFICATIONS ITEM# 151608 Voltage: Max. output: No load speed: Cord: 120V ~ 60Hz 180W 14000 RPM 6 feet (2m) Dust-Sealed On/off Switch Dust Extraction Adaptor
More informationPress Snap Soil Pipe Cutter
Press Snap Manual Press Snap Soil Pipe Cutter 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com! Read this Operator s Manual carefully
More informationOPERATION & MAINTENANCE
DOUBLE HEADED METAL NIBBLER MODEL NO: DHC-2 PART NO: 6500233 OPERATION & MAINTENANCE INSTRUCTIONS LS0609 INTRODUCTION Thank you for purchasing this CLARKE Double Headed Metal Nibbler. Before attempting
More informationWorkbench with peg board & drawer
Workbench with peg board & drawer Model 95387 Assembly And Operation Instructions Due to continuing improvements, actual product may differ slightly from the product described herein. Tools not included.
More informationMULTI-PURPOSE SAW MODEL NO. OZMPS500A OPERATING INSTRUCTIONS
MULTI-PURPOSE SAW 500watt MODEL NO. OZMPS500A OPERATING INSTRUCTIONS To view our entire range visit www.ozito.com.au SPECIFICATIONS - MODEL NO. OZMPS500A Motor: Input: No load speed: Length of stroke:
More information12 TON HYDRAULIC SHOP PRESS. Instruction Manual. Please read this instruction manual carefully before use.
12 TON HYDRAULIC SHOP PRESS Instruction Manual Please read this instruction manual carefully before use. IMPORTANT PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFETY INSTRUCTIONS AND WARNINGS. USE
More informationItem# " VARIABLE SPEED BENCH GRINDER USER'S MANUAL
Power Tools Item# 33309 3" VARIABLE SPEED BENCH GRINDER USER'S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other
More informationENGLISH (Original instructions) INSTRUCTION MANUAL. Router 3600H. IMPORTANT: Read Before Using.
ENGLISH (Original instructions) INSTRUCTION MANUAL Router 300H 00507 IMPORTANT: Read Before Using. ENGLISH (Original instructions) SPECIFICATIONS Model 300H Collet chuck capacity or /" No load speed (min
More information