SURFACE FINISHING. Product range

Transcription

1 SURFACE FINISHING Product range

2 Sanding and polishing with Festool: With a system for the perfect surface. In no other area is the assessment of quality so diversified than in surface finishing. Because ultimately this is always subject to the user s viewpoint and the task at hand. Be it quick and high material removal capacity or the preparation of a particularly fine sanding pattern as a basis for the perfect finish. Or the treatment of a flawless, high-gloss surface. In no other area is the system concept so pronounced than in the target-oriented development of our sanding and polishing tools. With robust power tools designed for long, effortless use thanks to their ergonomic features. With coordinated pads and sanding pads for perfect transmission. And sanding and polishing agents which are developed with the same care as the tool range itself. A system concept which starts with the application but also takes environmental and health aspects into consideration. Through integrated dust extraction as well as the relevant mobile dust extractors. A system concept which focuses on the perfect tool and the perfect result. And on the people for whom we have developed each one of our tools. Contents Systems get it done Geared eccentric sander ROTEX Eccentric sander ETS WTS RUTSCHER RS RTS Linear sander DUPLEX LS Delta sander DTS Triangular sander DELTEX DX Belt sander BS Rotary sander RAS Long-reach sander PLANEX LHS Compressed air sander LEX 2 LRS Festool sanding system Rotary polisher RAP POLLUX Festool polishing system SURFIX oil dispenser Overview of all tools Accessories and consumables Scope of delivery and order numbers

3 MULTI-JETSTREAM World first: The MULTI-JETSTREAM* sanding system with integral dust conveying concept. The sanding dust is transported to the extraction channels using supply and return air, the sanding area remains dust-free, the sanding power constantly high. The result: Constant suction power and clearly superior sanding results combined with time and cost benefits * For all sanders with a diameter of 150 mm FastFix and StickFix Quick response to alternating tasks and material requirements. With FastFix for pad change without using any tools and the StickFix system for the quick change of abrasives with extremely reliable adhesion. Quality tools Made in Germany Many of our tools have already been in use for over 30 years. This is no coincidence but a logical consequence of careful development and production - Made in Germany. Our products live up to the promise: tools for the toughest demands. Special service With each warranty application Festool customers automatically receive an extra service: the Festool Service. Starting with an exceptionally quick repair service, a reliable supply of spare parts for 7 years to the extended warranty of 3 years. More information on the Festool Service and all related benefits can be found at 3

4 Because things work better when everything fits together. Systems get it done. System = Added value Whoever wants to be good needs the perfect tool. Whoever wants to be better needs a system. A system in which accessories and consumable materials go hand in hand with the tools. A system that represents more order and organisation. And which gives added value with each investment. A system that only has one goal: To achieve increased success even more swiftly and easily. Example of a ROTEX: One investment, 3 tools. 3-in-1 function: eccentric sander, geared eccentric sander and polisher. As a RO 90 DX it can also be enhanced with the triangular actuator to become the delta sander. Sanding pads and accessories are often compatible and can be used on various tools. And the Festool mobile dust extractors are suitable for different work areas thanks to their variably adjustable suction power. 4

5 System = Continuous work process System = Better organised Efficient work: With no interruptions and significantly less reworking. Using the vacuum clamping system VAC SYS for example tools can be clamped securely and quickly without leaving marks on the surface. SYSTAINERs and Work Centers store accessories and keep the tools constantly at the ready. And the mobile dust extractors ensure not only cleaner air, but also less time spent cleaning at the workplace. The flexible organisation of the interior of a SORTAINER creates order and layout. SYSTAINERs protect the tool and accessories. Connected with the mobile dust extractors they convey a professional look to the customer. And combined with the Work Center a mobile workplace is created. 5

6 Geared eccentric sander ROTEX RO 90 DX RO 125 RO 150 Multifunctional legend. The unmatched original for more than 25 years: The ROTEX with the 3-in-1 principle for coarse sanding, fine sanding and polishing. ROTEX RO 150 for maximum material removal capacity: MULTI-JETSTREAM principle* for maximum dust extraction at maximum sanding power. ROTEX RO 125 manageable and strong in removing materials: Lightweight, compact and with soft grip for effortless work. ROTEX RO 90 DX 4 tools in 1: With a triangular sanding pad the RO 90 DX becomes a delta sander for maximum material removal capacity on small areas with angles, corners and edges. Up to three times stronger material removal capacity than traditional eccentric sanders thanks to the powerful motor and the combination of eccentric and rotary motions Longlife through a robust eccentric shaft bearing, transmission with double seal and dust-free switch Speedy change of sanding and polishing pads without using any tools thanks to the FastFix Healthy and dust-free through dust extraction with the Jetstream principle (RO 125/RO 90 DX) less clogging of abrasives and fasteners, minimal heat development ROTEX rotary sander for comfortable polishing the reduced speed keeps the temperature low even with the powerful RO 150, formation of clouds and spray marks from the polish are prevented Technical data RO 90 DX RO 125 RO 150 Power consumption 400 W 500 W 720 W ROTEX rotary motion speed rpm rpm rpm Eccentric motion speed 3,500 7,000 rpm 3,000 6,000 rpm 3,300 6,800 rpm Sanding stroke 3 mm 3.6 mm 5 mm FastFix sanding pad Ø 90 mm 125 mm 150 mm Connection Ø 27 mm 27 mm 27 mm Weight 1.5 kg 1.9 kg 2.3 kg * For all sanding pads with a diameter of 150 mm and more information on the MULTI-JETSTREAM please refer to page 21 Scope of delivery Order numbers from page 30 6

7 For system accessories and consumables see from page 30 The ROTEX principle High material removal capacity in coarse sanding mode, super fine sanding pattern in intermediate sanding and fine sanding stages, cleaner corners with the Delta sanding pad and shiny results when polishing. 1. Coarse sanding 2. Fine sanding 3. Polishing 4. Corners Coarse sanding strong material removal capacity through the combination of eccentric motion and rotary motion with gear reduction. Fine sanding super fine sanding pattern with scratch-free surface thanks to the classic eccentric motion. Polishing perfect shiny surfaces with the use of the ROTEX rotary sander. 7

8 Eccentric sander ETS 125 ETS 150 WTS 150 Speedy finishing. Extremely quiet, perfect ergonomics, infinite speed adjustment, secure sanding pad brake: Common features of these three eccentric sanders for more comfort during long work tasks. ETS 125 handy for preliminary sanding and finishing: One-handed operation, ideal for overhead work and with a 2 mm sanding stroke is perfect for superior surface quality during finishing or preliminary sanding work. ETS 150/3, ETS 150/5 intermediate sanding and finishing: The ETS is available in two versions: With a 3 mm sanding stroke for an immaculate surface finish or with a 5 mm sanding stroke for intermediate sanding of clear coats or lacquer. WTS 150/7 high material removal capacity on large areas: Powerful with a 7 mm sanding stroke, comfortable to manage for effortless sanding of large areas. Technical data ETS 125 ETS 150/3 ETS 150/5 WTS 150/7 Power consumption 200 W 310 W 310 W 400 W Eccentric motion speed 6,000 14,000 rpm * 4,000 10,000 rpm 4,000 10,000 rpm 2,600 6,000 rpm Sanding stroke 2 mm 3 mm 5 mm 7 mm Interchangeable sanding pad Ø 125 mm 150 mm 150 mm 150 mm Connection Ø 27 mm 27 mm 27 mm 27 mm Weight 1.1 kg 1.8 kg 1.8 kg 1.9 kg * no MMC (14,000 rpm) ** For all sanding pads with a diameter of 150 mm and more information on the MULTI-JETSTREAM please refer to page 21 Scope of delivery Order numbers from page 32 8

9 For system accessories and consumables see from page 32 Secure and precise guidance optimal ergonomic design and hold thanks to the soft grip cover, thus ensuring efficient sanding of areas and profiles. Maximum sanding power thanks to extra effective dust extraction with MULTI-JETSTREAM**. Protruding ends in the case of wood frame joints for example can be adjusted simply and precisely. Effortless work: The ETS 125 is lightweight and has an optimal centre of gravity. Tip: Workplaces also become more ergonomic with Festool, for example with the vacuum clamping system VAC SYS visit for more information 9

10 RUTSCHER RS 100 RS 200 RS 300 RTS years. And better than ever. Invented in 1951 and since then has been consistently further developed with regard to performance, ergonomic detail, efficiency and diversity. RS 100 efficient on large areas: Gear reduction for consistently strong material removal capacity, perfect for sanding off stubborn coatings, pleasant running smoothness thanks to vibration stop. RS 200 fine sanding on large surfaces: Achieves excellent surface quality in intermediate sanding and final sanding of clear coats and lacquer with large sanding pad and high speed. RS 300 variable use: Various sanding pads and optimal relationship between size, weight and sanding pad perfect for areas, corners, edges, decking. RTS 400 easy overhead work: Only weighing 1.1 kg, silent operation and thus optimal for one-handed operation and for persistent work with less effort. Can be adapted to various materials through infinite speed adjustment thanks to MMC electronics Clean work perfect dust extraction for open view of work area and dust-free workplace Longlife thanks to particularly stable design Technical data RS 100 RS 100 C RS 200 RS 300 RTS 400 Power consumption 620 W 620 W 330 W 280 W 200 W Speed 6,000 rpm 6,300 rpm 4,000 10,000 rpm * 4,000 10,000 rpm * 6,000 14,000 rpm ** Sanding stroke 5 mm 5 mm 2,4 mm 2,4 mm 2 mm Interchangeable sanding pad 115 x 225 mm 115 x 225 mm 115 x 225 mm 93 x 175 mm 80 x 130 mm Connection Ø 27 mm 27 mm 27 mm 27 mm 27 mm Weight 3.3 kg 3.0 kg 2.5 kg 2.3 kg 1.1 kg * no MMC (10,000 rpm) ** no MMC (14,000 rpm) Scope of delivery Order numbers from page 34 10

11 For system accessories and consumables see from page 34 For everyone who likes manual finishing: Hand sanding block from Festool. The hand sanding blocks also fit in the system. They can be connected to mobile dust extractors, the extraction power can be adjusted via the bypass adapter and Festool abrasives can be changed quickly with the StickFix. Right- or left-handed operation the compact and ergonomic RTS 400 fits perfectly in the hand and conserves power. Powerful on large areas here the RS 100 with a 5 mm stroke and gear reduction feature is optimal. Quick for excellent surface quality with the RS 200 and large sanding pad, 2.4 mm sanding stroke and direct drive. Universal application the RS 300 has the corresponding sanding pad at the ready for almost every task. 11

12 DUPLEX LS 130 DTS 400 DELTEX DX 93 It will be tight. This is where the specialists take over. Narrow corners, small areas, edges, profiles difficult-to-access areas. No problem for these robust special sanders from Festool: Linear sander DUPLEX LS 130 for rebates, radii and profiles: For sanding handrails or louvres for example Wide range of applications thanks to various sanding pads and abrasives Always the right sanding pad 11 standard pads and a DIY construction kit for making sanding pads for every profile Delta sander DTS 400 compact one-handed sander: For fine sanding at corners and edges the workpiece is protected with the edge guard For dust extraction the mobile dust extractor or dust bag can be connected Perfect for arduous work ergonomic design, lightweight and easy to guide Triangular sander DELTEX DX 93 high material removal capacity right into the final angle: Saves time and money tips of the sanding pad can be turned for consistent use of the three sides Longlife powerful bevel gears and dust-tight housing of bearing For intermediate spaces simply use the slat sanding pad Technical data LS 130 DTS 400 DX 93 Power consumption 260 W 200 W 150 W Speed 4,000 6,000 rpm 6,000 14,000 rpm * 5,000 9,500 rpm Sanding stroke 4 mm 2 mm 2,5 mm Interchangeable sanding pad 133 x 80 mm 100 x 150 mm Connection Ø 27 mm 27 mm 27 mm Weight 1.7 kg 1.1 kg 1.5 kg * without MMC electronics Scope of delivery Order numbers from page 36 12

13 For system accessories and consumables see from page 36 The DELTEX also reaches small angles and narrow corners. Here the tip of the sanding pad can be turned thus increasing the life threefold. DUPLEX LS 130 its linear motion is modelled on the process used for manual sanding but the desired result is achieved more efficiently and quicker. Optimal preparation of windows and doors the DTS 400 with its iron-shaped pad can be securely guided to narrow edges and into corners. Individual profiling sanding pads manufactured quickly and reasonably with the DIY construction kit. For perfect results just like with manual sanding in a fraction of the time. 13

14 Belt sanders BS 75 BS 105 Continuous precision. Sanding wood, absolute precision, parallel to the grain: Whether it is coarse or fine sanding when it comes to linear sanding these belt sanders are precisely the right tool. For best results in record time, without sanding rings and thus no reworking. BS 75 universal for smaller areas: Perfect for sanding the surface of furniture for example. BS 105 exceptionally quick for large areas: Optimal during sanding of door cases or planar areas of similar size for example. Processing various materials with infinite adjustment of the belt speed and sanding base made from graphite or metal with cork underlay for fine or coarse sanding Always accurate through precise adjustment after every belt change Quick change of frames without using tools Perfect system accessories for fixed use in the workshop the belt sanders can be quickly retrofitted with a stationary set Technical data BS 75 BS 105 Power consumption 1,010 W 1,400 W Power consumption* 800 W 1,200 W Rated belt load m/min m/min Rated belt load* 315 m/min 380 m/min Belt width 75 mm 105 mm Belt length 533 mm 620 mm Sanding area 135 x 75 mm 160 x 105 mm Connection Ø 27/36 mm 27/36 mm Weight 3.8 kg 6.5 kg * without electronic settings Scope of delivery Order numbers from page 38 Secure sanding the sanding frame can be positioned gently and securely, the belt sander does not tilt and is easy to guide. 14

15 Rotary sanders RAS 115 RAS 180 Excellence for coarse sanding. For system accessories and consumables see from page 38 Thick layers on clear coat, lacquer, paint or rust. On wood, metal or plastic: The specialist area of the RAS rotary sander. The high material removal capacity speeds up the process in coarse sanding with less effort. RAS 115 clean sanding down to the edge: Ideal for effortless work on smaller areas and in edge areas. RAS 180 strong on large areas: Efficient for sanding off parquet or other spacious areas for example. Unnecessary reworking rust and mill scale, as well as thick clear coats, lacquer and paint layers can be sanded down quickly and cleanly Uninterrupted work through quick pad change with FastFix without using tools For tough continuous use with overload protection through temperature control Health-friendly antistatic equipment for safety when removing clear coats and lacquer on metal, perfect dust extraction of fine dust and chips with extraction hood Technical data RAS 115 RAS 180 Power consumption 500 W 1,500 W Speed 1,350 3,800 rpm 800 4,000 rpm Interchangeable sanding pad Ø 115 mm 180 mm Spindle thread M14 M14 Connection Ø 27 mm 27 mm Weight 2.3 kg 4.2 kg Scope of delivery Order numbers from page 38 Parquet flooring is really simple to sand in edge areas. 15

16 Long-reach sander PLANEX LHS 225 Efficient short-reach or long-reach sanding on walls and ceilings. Rooms in drywall construction cannot be prepared simpler and quicker: The PLANEX achieves a material removal capacity of up to 18 kg per hour subject to the subsurface material and the abrasive. Clean extraction using the appropriate mobile dust extractor CLEANTEX CT AC-PLANEX. It can be used as both a short-reach and long-reach sander thanks to the variable length and is also extremely robust. High material removal capacity through the excellent motor power with dual gears and direct power transfer Intelligent dust extraction can be set to internal extraction of fine dust with extraction effect and external extraction for coarser materials Easy to guide through the controllable extraction for various work scenarios Freedom of movement through large cutting angle adjustment, no slipping of the hose with mechanical locking Back-friendly work with the harness work is simple and effortless and possible up to a height of 2.60 m Technical data LHS 225 Power consumption Speed Sanding pad diameter Connection Ø Weight (length 1.60 m) Weight (length 1.10 m) 550 W rpm 215 mm 36 mm 4.6 kg 3.8 kg Scope of delivery Order numbers from page 40 16

17 For system accessories and consumables see from page 40 Proximate work the brush segment at the sanding pad can be removed. Comfortable work with variable length with the simple quick-clamp system made from robust steel for work on the wall, as well as on high ceilings. The dust extraction system can be set to internal or external extraction. There is an extraction effect for easier work in the case of the internal extraction. The special dust extractor CLEANTEX AC PLANEX is precisely coordinated to work with the PLANEX: With automatic filter cleaning and locking slide ComfortClean for exceptionally stronger cleaning thanks to vacuum, kink-proof hose and tool holder. 17

18 Compressed air sander LEX 2 LRS Designed for continuous operations. Extremely robust, reliable and durable. Ideal for tough applications in paint workshops or in the industrial area for example. Because compressed air sanders are maintenance-free and still lighter than power tools. Solid lamellae motors provide power, the clever IAS-2 system ensures perfect dust extraction and for health-oriented work the vibration stop is used. Compressed air eccentric sander LEX 2 Perfect for every area: For every application available in three diameters (125, 150 and 185 mm) and strokes (3, 7 and 11 mm*) for coarse, intermediate, or fine sanding Secure and precise with dead-man switch and sanding pad brake for cleaner sanding result Superior work quality through speed and stroke rate adjustment to material Economical in abrasive consumption with MULTI- JETSTREAM principle** Compressed air orbital sander LRS Experts for flat surfaces of all sizes: Also easy to guide using one hand Available in two sizes for efficient sanding of different-sized workpieces Adjusted to various materials with speed and stroke rate preselection (LRS 93) Technical data LEX 2 125/3 LEX 2 125/7 LEX 150/3 LEX 2 150/7 LEX 2 150/11 LEX 2 185/7 Operating pressure (flow pressure) 6 bar 6 bar 6 bar 6 bar 6 bar 6 bar No. of strokes 16,000 rpm 16,000 rpm 16,000 rpm 16,000 rpm 14,000 rpm 16,000 rpm Sanding stroke 3 mm 7 mm 3 mm 7 mm 11 mm 7 mm Air consumption at rated load 390 l/min 390 l/min 390 l/min 390 l/min 390 l/min 390 l/min Sanding pad diameter 125 mm 125 mm 150 mm 150 mm 150 mm 185 mm Weight 1.3 kg 1.3 kg 1.3 kg 1.3 kg 1.3 kg 1.4 kg Technical data LRS 93 LRS 400 Operating pressure (flow pressure) 6 bar 6 bar No. of strokes 14,000 rpm 14,000 rpm Sanding stroke 4 mm 4 mm Air consumption at rated load 310 l/min 390 l/min Sanding pad StickFix 93 x 175 mm 80 x 400 mm Weight 1.2 kg 2.3 kg 18 *depending on Ø ** For all sanding pads with a diameter of 150 mm and more information on the MULTI-JETSTREAM please refer to page 21 Scope of delivery Order numbers from page 40

19 For system accessories and consumables see from page 40 Advantages to the power of three the Festool IAS 2 system The unique IAS 2 system combines three functions in one hose: compressed air supply, exhaust air extraction and dust extraction. Keeping sanding dust and oily exhaust air away from the working surface, for a clean surface and first-rate painting results. Thanks to the exhaust air extraction the tool runs smoother and no cold air flows out: Hands and wrists remain warm, work is more pleasant and healthier. 1 Dust extraction 2 Exhaust air extraction 3 Compressed air supply No confusion thanks to easy-to-read stroke identification on all LEX 2. The LEX 2s are fitted with a dead-man switch to ensure continuous safe work. Safe and healthy the LEX 2 does not slip in your hand thanks to the soft-grip cap. The dust extraction with MULTI-JETSTREAM** principle keeps inhaled air and the workpiece clean. 19

20 Festool sanding system Superior quality right down to the final grit. For an optimal surface quality it depends on each individual detail. For this reason with Festool all abrasives and pads can be changed without using tools and coordinated to the complete system. There is the corresponding pad for every requirement. For guaranteed efficient and economical work with flawless results from coarse sanding to fine sanding. Abrasive 20 S Optimal for wood processing Universal for paints and lacquers. For high material removal from wood and clear coats. For levelling and coarse sanding For light sanding, cleaning, oiling, waxing For perfect preparation for polishing For VOC, water paints, high-gloss fine sanding P P P P A80 S800 S P500 Sanding: Hardwood Softwood Wood composites Tropical wood Sanding: Acrylic and nitrocellulose paint, priming varnish, DD lacquer Repair compound, fine and polyester filler Undercoats, fillers, protective paint, primers Preparation prior to priming wood (oil, wood stains) Coarse sanding: Hard subsurfaces, coatings, old clear coats and lacquer, levelled-off steps, raw wooden parts Deburring edges and plastics reinforced with rust or fibres Removal of old, soft paint layers Polyester filler, 2K materials Repair compound Matting/light sanding of paints and clear coats Lightly sanding old coats of paint before repainting Polishing metal Cleaning wood materials Oiling and waxing natural wood Finishing work, matting: High-gloss paints in preparation for polishing Water-soluble clear coats and lacquer Mineral materials: Corian, Varicor, Cristalan, acrylic, Plexiglas Plastics Sanding: VOC-compliant paint systems Water-soluble clear coats and lacquer Toughest clear coats and lacquer, subsurfaces such as GFK Also suitable for conventional clear coats, lacquer, filler, paints 2011_GB_en_FB_SurfaceTreatment.indb :27 E F a co

21 ints, nding More system accessories and consumables are available at or in the main catalogue. With active dust-conveying the patented MULTI-JETSTREAM principle* The patented MULTI-JETSTREAM* sanding system is the world s only system that works with supply and return air. An air flow is thus created that actively conveys the sanding dust to the nearest extraction channel. The result: Virtually 100% dust extraction to ensure a constantly high material removal rate and top surface quality. Active dust conveying concept The MULTI-JETSTREAM* principle actively conveys the dust through 16 small channels and one large intake air channel to the exhaust air channels of the sanding pad - for quicker dust extraction and longlife. Dust is extracted from every point on the pad through the ingenious network of channels In only one second at a rate of 97.2%.** Intake air channel Exhaust air channel Dust-free, 6 x faster Fast dust extraction ensures that the fastener and abrasive remain free of dust for longer periods. The abrasive remains effective and the useful life increases. The abrasive can be used several times, thus reducing operating costs. Sanding pads Extra-soft Soft Hard MULTI-JETSTREAM sanding pad: Free of dust in 1 sec. Conventional sanding pad: Clogged with dust after 1 sec, free of dust after 6 sec. 10 C cooler fastener The MULTI-JETSTREAM principle supplies cool intake air to the fastener, abrasive and work surface. Clogging and obstructions are effectively prevented. For high arches and curves, elastic construction For heavy-duty and universal use with temperatureresistant fastener For flat surfaces and narrow edges, high edge strength, temperature-resistant fastener MULTI-JETSTREAM: Temperature 31 after 4 min. Conventional fastener: Temperature 41 after 4 min. er, ch r ar * For all sanding pads with a diameter of 150 mm ** Festool test laboratory, June _GB_en_FB_SurfaceTreatment.indb :27

22 Rotary polisher RAP 80 SHINEX RAP 150 POLLUX 180 Gleaming results. And that s guaranteed. Small or big areas the rotary polisher from Festool is always available in the right size: With diameters of 80, 150 and 180 mm they impress with their perfect ergonomic design, efficiency and naturally shiny results. Longlife with temperature-resistant overload protection and a mesh against dirt Arduous work weighing only 2.1 kg, ergonomic design with optimal centre of gravity RAP 80 the solution for difficult jobs: Work at ease thanks to the slimline compact design, the practical grip cap and the minimal weight Robust the overload protection effectively prevents damage to the motor Perfect for small, arched or difficult-to-access areas the RAP 80 fits securely in the hand and can be guided well POLLUX 180 when faced with big tasks: Particularly resilient thanks to improved cooling in the lower speed range and temperaturedependent overload protection Surface-specific treatment thanks to constant speed setting, infinite speed preselection and smooth start-up Slow polishing with variable speed trigger SHINEX RAP 150 Precise application of power: Variable speed trigger for gentle start-up and acceleration, depending on the speed level between rpm Powerful, robust and persistent over the entire speed range thanks to the two-stage transmission Technical data RAP 80 RAP 150 POLLUX 180 Power consumption 500 W 1,200 W 1,500 W Idle engine speed 750 2,300 rpm 400 2,100 rpm 800 2,400 rpm Maximum backing pad diameter 80 mm 150 mm 180 mm Spindle thread M14 M14 M14 Weight 1.6 kg 2.1 kg 3.6 kg Scope of delivery Order numbers from page 42 22

23 For system accessories and consumables see from page 42 Award winning! And indeed with the if Design Award: the SHINEX RAP 150. Optimal power transfer thanks to the minimum distance between the tool and pad and the various grip positions of the SHINEX RAP 150. Ideal for difficult jobs the RAP 80 fits securely in the hand, tipping over is almost impossible. The POLLUX 180 is the specialist for large areas extremely resilient and safe thanks to the overload protection. 23

24 Festool polishing system Detail of success. Festool combines tools, backing pads, polishing pads and polishing agents: for smooth work and gleaming results using different materials. And right from the start, no reworking. Whether it is high-gloss paint, UV clear coat/lacquer, mineral materials or acrylic glass the Festool polishing system has the solution for every task. Foam polishing pads Superior quality reliably guarantees the best results on all paint types. High abrasiveness with optimal shine is achieved using the polish MPA 5000 plus sheepskin pad. Coarse For polishing heavily weathered surfaces (in preparation for painting) Medium For preliminary polishing when repairing paint flaws Fine For preliminary polishing and finishing when removing dust pockets and for highgloss polish Fine, waffle face For preliminary polishing and finishing when removing dust pockets and for polishing out holograms Fine For repairing paint flaws, and for followup polishing after removing dust pockets Extra fine For processing sealant and high-gloss polish Extra fine, waffle face For polishing out swirl marks and for high-gloss polish 24

25 More system accessories and consumables are available at or in the main catalogue. Innovative, efficient, health-conscious and environmentfriendly the Festool polishes. All polishes are water-based and very low in pollutants. They work on an aluminiumoxide basis, the grits are removed during processing. Silicone and wax are unnecessary. 1-step polishes are efficient thanks to the fusion of several work steps. MPA 5000 MPA 6000 MPA 8000 MPA 9000 Speed Cut 1-step sanding polish: High abrasiveness with high gloss at the same time Sanding polish Fine sanding polish 1-step multi-purpose polish: For removing light scratches and sealing in a single step, produces high shine MPA MPA MPA High-gloss polish Ceramic high-gloss polish: Extra fine UV ceramic high-gloss polish: For polishing UV varnishes MPA-V High-gloss sealant: For sealing surfaces Polishing felt and sheepskin pad Perfect down to the last detail microfibre cloths and finish cleaner The high-quality microfibre cloths have a non-scratch edge for a perfect finish. Together with the finish cleaner they are ideal for removing polish residue and grease spots. Hard polishing felt: For preliminary polishing of mineral materials, acrylic glass and clear coats Soft polishing felt: For followup polishing of mineral materials, acrylic glass and clear coats Sheepskin pad: For polishing scratch-resistant clear coats Premium sheepskin pad: Particularly suitable for UV clear coats, scratch-resistant clear coats Everything for gleaming results in one SYSTAINER The SHINEX RAP 150 polisher with sheepskin pad, pads, self-adhesive sanding discs, abrasives, polish agents, microfibre cloths, finish cleaner and recommended polish optimally stored in the polishing Systainer. 25

26 SURFIX oil dispenser Oil application in its cleanest form. The SURFIX oil dispenser makes oil application on natural wood surfaces easier than before: with one oil bottle which is also used as a handle. With a pad which works right into the corners. The oil dispenser utilisies high-quality natural oils from Festool for every application. Quick and ergonomic The full oil bottle clicks into the base plate and is used as a hand grip. Pressing down on the bottle controls the flow of oil, which is then distributed easily using the foam pad. Clean and economical the foam pad absorbs oil excess and reapplies it in the right place For every application with the oil types Heavy- Duty, One-Step and Outdoor for internal and external areas, as well as for light and dark wood Safe and clean the pad remains soft for a long period when stored in the tin and can be used again The perfect system: 1. Preparation: Final polishing: 2. Oil application 3. Follow-up processing: 15 min Sanding and polishing 4. If required: Other oil applications ROTEX ETS RUBIN BRILLIANT 2 P ROTEX ETS VLIES GREEN/WHITE 26

27 Scope of delivery and all system components from page 42 Simple change the bottles can be mounted to the base plate in one click and the sponges quickly replaced using the StickFix. Oiling in narrow corners and upright areas quick and clean using this system. HEAVY-DUTY: Special oil for heavy-duty surfaces in internal areas. ONE-STEP: Oil/Wax mix for less demanding or decorative surfaces. OUTDOOR: Universal oil for furniture and components in external areas. 27

28 Overview of all tools All tools at a glance. Geared eccentric sanders: 3-in-1 coarse sanding, fine sanding and polishing Eccentric sanders: for preliminary, fine and extra-fine sanding Geared orbital sander: for stronger material removal capacity Direct drive RUTSCHER: for fine sanding The choice of the correct sander is so easy: The appropriate device is identified based on the most frequent daily applications. extremely appropriate very appropriate ROTEX RO 90 DX ROTEX RO 125 ROTEX RO 150 ETS 125 ETS 150/3 ETS 150/5 WTS 150/7 RUTSCHER RS 100 RUTSCHER RS 100 C RUTSCHER RS 200 RUTSCHER RS 300 RUTSCHER RTS 400 Surfaces Coarse sanding Preliminary sanding Fine sanding Extra-fine sanding Curves Coarse sanding Preliminary sanding Fine sanding Extra-fine sanding Corners Coarse sanding Preliminary sanding Fine sanding Extra-fine sanding Profiles Coarse sanding Preliminary sanding Fine sanding Extra-fine sanding Polishing Small surfaces Large surfaces 28

29 Delta sanders: for corners Triangular sanders: for corners and intermediate areas Linear sanders: for rebates, radii, profiles Rotary sanders: high material removal capacity for speedy work Belt sanders: no grooves, no reworking Rotary polisher: smooth polishing for gleaming results Long-reach sanders: efficient in drywall construction DTS 400 DELTEX DX 93 DUPLEX LS 130 RAS 115 RAS 180 BS 75 BS 105 RAP 80 SHINEX RAP 150 POLLUX 180 PLANEX LHS

30 ROTEX RO 90 DX RO 125 RO 150 Accessories and consumables. Sanding pads Geared eccentric sander ROTEX RO 90 DX Sanding and polishing pads Protector Cushioning Geared eccentric sander ROTEX RO 125 Geared eccentric sander ROTEX RO 150 Geared eccentric sander ROTEX Scope of delivery RO 90 DX FEQ Plus GB 240V FastFix sanding pad Ø 90 mm (soft HT), StickFix sanding pad V93, Festool PROTECTOR, abrasive mix V93, abrasive mix D90, in a SYSTAINER SYS 2 T-LOC RO 90 DX FEQ Plus GB 110V RO 125 FEQ Plus GB 110V RO 125 FEQ Plus GB 240V FastFix sanding pad Ø 125 mm (soft HT), StickFix sanding disc, Festool PROTECTOR, in a SYSTAINER SYS 2 T-LOC RO 150 FastFix sanding pad Ø 150 mm (soft HT), StickFix abrasive mix, Festool PROTECTOR RO 150 FEQ Plus GB 240V in a SYSTAINER SYS 3 T-LOC RO 150 FEQ Plus GB 110V Accessories ROTEX Scope of delivery 1 FastFix sanding pad ST-STF D90/7 FX H-HT hard version, temperature-resistant fastener, Ø 90 mm, for RO ST-STF D90/7 FX W-HT soft version, temperature-resistant fastener, Ø 90 mm, for RO ST-STF D125/8 FX-H hard version, high edge strength, temperature-resistant fastener, for flat areas and narrow edges, Ø 125 mm, for RO 125 ST-STF D125/8 FX-W-HT soft version, for general use on flat and curved areas, temperature-resistant fastener, Ø 125 mm, for RO 125 ST-STF D125/8 FX-SW extra-soft version, elasticated structure, for pronounced curves and arches, Ø 125 mm, for RO 125 FastFix louver pad LT-STF D125/RO125 for sanding louvres, Ø 150 mm, for RO FastFix sanding pad MULTI-JETSTREAM, FastFix connection, Ø 150 mm, for RO 150 ST-STF D150/17MJ-FX-H hard version, high edge strength, temperature-resistant fastener, for flat surfaces and narrow edges ST-STF D150/17MJ-FX-SW extra-soft version, elasticated structure, for pronounced arches and curves ST-STF D150/17MJ-FX-W-HT soft version, temperature-resistant fastener, for general use on flat and curved surfaces

31 More system accessories and consumables are available at or in the main catalogue. Abrasives Abrasives Foam polishing pads Accessories ROTEX Scope of delivery 2 Backing pad PT-STF-D90 FX-RO90 for holding polishing accessories with Ø 80 mm, Ø 75 mm, for RO 90 Polishing pad FastFix PT-STF-D125 FX-RO125 for holding the polishing accessories, Ø 125 mm, height 10 mm, for RO 125 Backing pad PT-STF-D150 MJ FX for holding the polishing accessories, Ø 130 mm, height 10 mm, for RO Protector Set FP-RO 90 Window protectors S, M, L, pack of 3, for RO 90 Protector FESTOOL 125FX For protecting the sanding pad and workpiece, for RO 125 Protector FESTOOL 150FX For protecting the sanding pad and workpiece, for RO Interface pad as cushioning element between sanding disc and sanding pad IP-STF-D90/6 Ø 90 mm, height 15 mm, for RO IP-STF-D120/90/8 for sanding curved parts and extra-fine sanding using eccentric sander Ø 125 mm, height 15 mm, Ø 120 mm, bolt circle diameter 90 mm, for RO 125 IP-STF D 150/17 MJ for sanding curved parts and extra-fine sanding using eccentric sander Ø 150 mm, MULTI-JET- STREAM, height 15 mm, Ø 145 mm, for RO Sanding pad SSH-GE-STF-RO90 DX Delta sanding pad, for holding the sanding pad StickFix, soft and hard, suitable for abrasive 93 V, plate without interchangeable sanding pad 6 Sanding pad StickFix with pushbutton, pack of 2, for RO 90 SSH-STF-V93/6-W/2 Soft SSH-STF-V93/6-H/2 Hard Accessories ROTEX Scope of delivery 7 Sanding pad LSS-STF-RO90 V93/6 Slat sanding pad V93, plate incl. interchangeable sanding pad, suitable for abrasive 93 V, for sanding in narrow intermediate areas 8 Sanding pad LSS-STF-RO90 V93 E Spare sanding pad for slat sanding pad For abrasives please refer to page 20 and visit for part numbers 10 SYSTAINER T-LOC SYS-STF RO 90 DX With insert for abrasive Ø 90 mm and abrasive 93V, SYSTAINER size SYS 1 T-LOC SYSTAINER T-LOC SYS-STF D125 with insert for abrasive Ø 125 mm, SYSTAINER size SYS 1 T-LOC SYSTAINER T-LOC SYS-STF D150 with insert for abrasive Ø 150 mm, SYSTAINER size SYS 3 T-LOC For polishing pads, polishing felt, non-woven cloths and sheepskin pads please refer to page 42 and visit for part numbers 31

32 ETS 125 ETS 150 WTS 150 Accessories and consumables. Eccentric sander ETS 125 Sanding pads Cushioning Abrasives Eccentric sander ETS 150 Eccentric sander WTS 150 Eccentric sander ETS WTS Scope of delivery ETS 125 StickFix sanding pad Ø 125 mm (soft HT), StickFix abrasive mix, filter cartridge ETS 125 EQ-Plus GB 240V in a SYSTAINER SYS 2 T-LOC ETS 125 EQ GB 240V in a box ETS 125 Q GB 240V in a box ETS 150 StickFix abrasive mix, operating tool ETS 150/3 EQ Plus GB 240V + StickFix sanding pad Ø 150 mm (soft), filter cartridge, in a SYSTAINER SYS 3 T-LOC ETS 150/3 EQ Plus GB 110V + StickFix sanding pad Ø 150 mm (soft), filter cartridge, in a box ETS 150/3 E GB 240 V + StickFix sanding pad Ø 150 mm (extra-soft), fixed cable, in a box ETS 150/5 EQ Plus GB 240V + StickFix sanding pad Ø 150 mm (soft), filter cartridge, in a SYSTAINER SYS 3 T-LOC ETS 150/5 EQ Plus GB 110V + StickFix sanding pad Ø 150 mm (soft), filter cartridge, in a box ETS 150/5 E-C GB 240V + StickFix sanding pad Ø 150 mm (extra-soft), fixed cable, filter cartridge, in a box ETS 150/5 E GB 240V StickFix sanding pad Ø 150 mm (soft); StickFix sanding disc Brilliant 2/Rubin mix; filter cartridge; fixed cable; operating tool WTS 150/7 E Plus GB 240V StickFix sanding pad Ø 150 mm (soft HT), StickFix abrasive mix, additional handle, operating tool, in a SYSTAINER SYS 2 T-LOC

33 More system accessories and consumables are available at or in the main catalogue. Clean working environment Accessories ETS WTS Scope of delivery 1 Sanding pads for ETS 125, connecting thread M4, bolt circle Ø 90 mm ST-STF ES125/90/8-M4 W-HT soft version, for general use on flat and curved surfaces, temperature-resistant fastener, for robust use of grit sizes up to P220 ST-STF ES125/90/8-M4 SW extra-soft version, elasticated structure, for pronounced arches and curves Sanding pads for ETS 150, WTS 150, LEX 150, MULTI-JETSTREAM, connecting thread M8 ST-STF D150/17MJ-M8-W soft version, for general use on flat and arched surfaces ST-STF D150/17MJ-M8-H hard version, high edge strength, temperature-resistant fastener, for flat surfaces and narrow edges ST-STF D150/17MJ-M8-W-HT soft version, temperatureresistant fastener, for robust and general use ST-STF D150/17MJ-M8-SW extra-soft version, elasticated structure, for pronounced arches and curves Sanding pads MULTI-JETSTREAM, connecting thread 5/16 ST-STF D150/17 MJ 5/16 for Hamach/Rupes: BR3/E/ST/E ST, TA151ST, for Orka: ROA1 D/E, DAA1 D/E, for Desoutter: Mod. 575, Mod. 576; adapter for Festool hose, bypass adapter Accessories ETS WTS Scope of delivery 2 Interface pad as a cushioning element between sanding disc and sanding pad, for sanding curved parts and extra-fine sanding IP-STF-D120/90/8 for ETS 125, height 15 mm, Ø 120 mm, bolt circle Ø 90 mm IP-STF D 150/17 MJ for ETS 150, WTS 150, MULTI-JET STREAM, height 15 mm, Ø 145 mm 3 For abrasives please refer to page 20 and visit for part numbers 4 SYSTAINER T-LOC SYS-STF D125 with insert for abrasive Ø 125 mm, SYSTAINER size SYS 1 T-LOC SYSTAINER T-LOC SYS-STF D150 with insert for abrasive Ø 150 mm, SYSTAINER size SYS 3 T-LOC 5 Turbo filter bag set Filter adapter TFS-RS 400 for ETS 125, 5x Turbo filter bag TFS-ES 150 for ETS 150, 1x Turbo filter bag Turbo filter bags for insertion in filter cartridge TF-RS 400/25 for ETS 125, pack of TF-RS 400/5 for ETS 125, pack of TF II-RS/ES/ET/25 for ETS 150, pack of TF II-RS/ES/ET/5 for ETS 150, pack of

34 RUTSCHER RS 100 RS 200 RS 300 RTS 400 Accessories and consumables. RUTSCHER RS 100 Sanding pads Clean working environment Abrasives RUTSCHER RS 200 Sanding pads RUTSCHER RS 300 RUTSCHER RTS 400 RUTSCHER RS RTS Scope of delivery RS 100 StickFix sanding disc RS 100 Q-Plus GB 240V + StickFix sanding pad 115 x 225 mm, filter cartridge, in a SYSTAINER SYS 2 T-LOC RS 100 CQ-Plus GB 240V + StickFix sanding pad 115 x 221 mm, in a SYSTAINER SYS 2 T-LOC RS 200 StickFix sanding pad 115 x 225 mm, StickFix sanding disc, filter cartridge RS 200 EQ-Plus GB 240V in a SYSTAINER SYS 2 T-LOC RS 300 StickFix sanding pad 93 x 175 mm, StickFix sanding disc, filter cartridge RS 300 EQ-Set GB 240V + sanding pad in iron-shaped design, in a SYSTAINER SYS 2 T-LOC RS 300 EQ-Plus GB 240V in a SYSTAINER SYS 2 T-LOC RTS 400 StickFix sanding pad 80 x 130 mm, StickFix abrasive mix, filter cartridge RTS 400 EQ-Plus GB 240V in a SYSTAINER SYS 1 T-LOC RTS 400 EQ in a box RTS 400 Q-Plus GB 240V in a SYSTAINER SYS 1 T-LOC RTS 400 Q GB 240V in a box

35 More system accessories and consumables are available at or in the main catalogue. Accessories RS RTS Scope of delivery 1 Sanding pad StickFix SSH-STF-115x225/10 for RS 100, RS 200, dimensions 115 x 225 mm SSH-STF-115x225/10-KS for RS 100, RS 200, with edge protection, dimensions 115 x 225 mm SSH-STF-115x221/10 RS 1 C for RS 100 C, dimensions 115 x 221 mm SSH-STF-93x175/8 for RS 300, dimensions 93 x 175 mm SSH-STF-80x130/14 for RTS 400, 14 extraction holes, dimensions 80 x 130 mm Sanding pad for abrasives for clamping, dimensions 115 x 225 mm SSH-115x225/10 for RS 100, RS SSH-115x225/10-KS for RS 100, RS 200, with edge protection SSH-93x175/8 for RS 300, for clamping abrasives, dimensions 93 x 175 mm Hole punch 10L 115x225 for RS 100, RS 200, for creating Festool hole pattern, no. of holes Hole punch 8L 93x175 for RS 300, for creating Festool hole pattern, no. of holes 8, dimensions 93 x 175 mm Turbo filter TF-RS 1/5 for RS 100, pack of Turbo filter TF II-RS/ES/ET/25 for RS 200, RS 300, for insert in filter cartridge, pack of Turbo filter TF II-RS/ES/ET/5 for RS 200, RS 300, for insert in filter cartridge, pack of Turbo filter TF-RS 400/25 for RTS 400, for insert in filter cartridge, pack of Turbo filter TF-RS 400/5 for RTS 400, for insert in filter cartridge, pack of Turbo filter set TFS II-ET/RS for RS 200, RS 300, filter cartridge, 5 turbo filter bags Turbo filter set TFS-RS 400 for RTS 400, filter cartridge, 5 turbo filter bags For abrasives please refer to page 20 and visit for part numbers 6 SYSTAINER T-LOC SYS-STF 115x228 with insert for abrasives 115 x 228 mm, SYSTAINER size SYS 2 T-LOC SYSTAINER T-LOC SYS-STF 93x178/93V with insert for abrasives 93 x 178 mm, SYSTAINER size SYS 2 T-LOC SYSTAINER T-LOC SYS-STF 80x133 with insert for abrasives 80 x 133 mm, SYSTAINER size SYS 1 T-LOC Stickfix sanding pad SSH-STF-L93x230/0 for RS 300, slat sanding pad design, dimensions 93 x 230 mm Stickfix sanding pad SSH-STF-V93x266/14 for RS 300, iron-shaped sanding pad design, dimensions 93 x 266 mm Sanding block Scope of delivery Sanding block adapter for Festool hole, bypass adapter, in a box HSK-A 80x HSK-A 115x HSK-A 80x HSK-A 80x HSK-A Set HSK-A 80x130, HSK-A 115x226, HSK-A 80x400, HSK-A 80x Hand sanding blocks: Also here the StickFix is quick for changing abrasives. For an open view of the work area the hand-sanding blocks can also be connected to the mobile dust extractors. 35

36 DUPLEX LS 130 DTS 400 DELTEX DX 93 Accessories and consumables. Profiling sanding pad Linear sander DUPLEX LS 130 Sanding pad Abrasives Clean working environment Delta sander DTS 400 Sanding pads Abrasives Triangular sanders DELTEX DX 93 Linear sander LS Scope of delivery LS 130 EQ-Plus GB 240V profile sanding pad StickFix standard, profile sanding pad 90, StickFix abrasive mix, in a SYSTAINER SYS 1 T-LOC Delta sander DTS Scope of delivery StickFix sanding pad 100 x 150 mm, StickFix abrasive mix, filter cartridge DTS 400 EQ-Plus GB 240V in a SYSTAINER SYS 2 T-LOC Triangular sanders DX Scope of delivery with pushbutton, StickFix sanding pad 93 V (soft), StickFix sanding disc 93V, StickFix slat sanding pad, plate DX 93 E-Plus GB 240V in a SYSTAINER SYS 2 T-LOC

37 More system accessories and consumables are available at or in the main catalogue. Cushioning Scraper Slat sanding pad Abrasives Accessories LS DTS DX Scope of delivery 1 Flat sanding pad SSH-STF-LS130-F standard version, dimensions 80 x 130 mm 2 Rebate profile sanding pad SSH-STF-LS GR degrees, dimensions 80 x 130 mm 3 Radius profile sanding pad Dimensions: 80 x 130 mm SSH-STF-LS130-R6KV R6 concave radius SSH-STF-LS130-R10KV R10 concave radius Radius profile sanding pad Dimensions: 80 x 130 mm SSH-STF-LS130-R18KV R18 concave radius SSH-STF-LS130-R25KV R25 concave radius V-groove profile sanding pad SSH-STF-LS130-V10 10 mm, dimensions 80 x 130 mm 6 Flute profile sanding pad Dimensions: 80 x 130 mm SSH-STF-LS130-R10KX radius R10 convex SSH-STF-LS130-R25KX radius R25 convex DIY kit SSH-STF-LS130 kit kit for creating any type of profile sanding pad 8 Interface pad IP-STF-80x133/14-STF LS130/2 for LS 130, cushioning element between sanding pad and abrasive, dimension 80 x 133 mm, pack of 2 9 Scraper SSH-LS130-B100 for LS 130, for removing coatings, width 100 mm 10 Extended-length sanding pad, long SSH-STF-LS130-LL for LS 130, for sanding behind fittings and louvres, dimensions 80 x 195 mm Extended-length sanding pad, wide SSH-STF-LS130-LB131 for LS 130, for sanding louvres on both sides, dimensions 158 x 130 mm For abrasives please refer to page 20 and visit for part numbers Accessories LS DTS DX Scope of delivery 12 SYSTAINER T-LOC SYS-STF 80x133 with insert for abrasives x 133 mm, SYSTAINER size SYS 1 T-LOC SYSTAINER T-LOC SYS-STF Delta 100x150 with insert for abrasives 100 x 150 mm, SYSTAINER size SYS 1 T-LOC SYSTAINER T-LOC SYS-STF RO 90 DX with insert for abrasive Ø 90 mm and abrasive 93V, SYSTAINER size SYS 1 T-LOC 13 Stickfix sanding pad SSH-STF-Delta100x150/7 for DTS 400, for sanding right into corners, dimensions 100 x 150 mm Sanding pad StickFix StickFix, with pushbutton, pack of 2 SSH-STF-V93/6-W/2 Soft for DX SSH-STF-V93/6-H/2 Hard for DX Turbo filter set TFS-RS 400 for DTS 400, filter cartridge, turbo filter bags 15 Turbo filter bags for DTS 400, for insert in filter cartridge TF-RS 400/5 pack of TF-RS 400/25 pack of Sanding base TP-STF-DX93 for DX 93, StickFix accessories for mounting sanding pad 17 Conversion kit DX 93 E TP-STF-V93-W for DX 93, consisting of sanding base TP-STF-DX93 and sanding pad SSH-STF-V93/6-W, with pushbutton, StickFix 18 Extended-length sanding pad SSH-STF-V93L/7 for DX 93, StickFix, pack of

38 BS 75 BS 105 RAS 115 RAS 180 Accessories and consumables. Belt sander BS 75 Sanding bases Secure guides Sanding belt Belt sander BS 105 Sanding pads Brushing Rotary sander RAS 115 Rotary sander RAS 180 Belt sander BS Scope of delivery extraction adapter, dust bag BS 75 E-Set GB 240V + 4 sanding belts P60, P80, P100, P120, stationary unit, surface sanding frame, in a SYSTAINER SYS MAXI BS 75 E-Plus GB 240V + 4 sanding belts P60, P80, P100, P120, stationary unit, in a SYSTAINER SYS MAXI BS 105 E-Set GB 240V + 4 sanding belts P60, P80, P100, P120, stationary unit, surface sanding frame, in a SYSTAINER SYS MAXI BS 105 E-Plus GB 240V + 4 sanding belts P60, P80, P100, P120, stationary unit, in a SYSTAINER SYS MAXI Rotary sander RAS Scope of delivery Operating tool RAS E-Set GB 240V + StickFix sanding pad Ø 115 mm (soft), sanding pad 2F Ø 115 mm, StickFix sanding discs, extraction hood, protective hood, additional handle, in a SYSTAINER SYS 2 T-LOC RAS E-AH GB 240V + StickFix sanding pad Ø 180 mm (soft), StickFix sanding disc, extraction hood with handle, in a box

39 More system accessories and consumables are available at or in the main catalogue. Efficient dust extraction Secure guides Stationary tasks Spark trap Accessories BS RAS Scope of delivery Abrasives 1 Sanding base SU/GG-BS 75 for BS 75, made from woven material/graphite, pack of 2 SU/KM-BS 75 for BS 75, made from cork/metal for coarse sanding, pack of 1 SU/GG-BS 105 for BS 105, made from woven material/graphite, pack of 2 SU/KM-BS 105 for BS 105, made from cork/metal for coarse sanding, pack of 1 2 Sanding frame Mounting part, pack of 1 FSR-BS 75 for BS FSR-BS 105 for BS For abrasives and sanding belts please refer to page 20 and visit for part numbers 4 Extraction adapter AA-BS 75/105 for BS 75, BS 105, for connecting suction hose to belt sander 5 Dust bag AS-BS 75/105 for BS 75, BS Stopper LA-BS 75/105 for BS 75, BS Bench unit SE-BS 75/105 for BS 75, BS 105, pack of Accessories BS RAS Scope of delivery 8 Sanding pads Connection thread M14 ST-STF-D115/0-M14 W for RAS 115, soft version, for general use on flat and curved areas ST-STF-D115/0-M14 H for RAS 115, hard version, high edge strength, for flat surfaces and narrow edges ST-D115/0-M14/2F for RAS 115, for fibre discs and longlife fibre discs Ø 115 mm, clamping nut ST-STF-D180/0-M14 W for RAS 180, soft version, for general use on flat and curved areas ST-D180/0-M14/2F for RAS 180, for fibre discs Ø 180 mm Flexible sanding pad ST-D115/0-EL for RAS Clamping nut SM-M14/D115 for RAS 115, for mounting Fiberfix sanding discs 11 Applications AHP-RAS D115/2 for RAS 115, with plastic bristles, pack of AHM-RAS D115 for RAS 115, with metal bristles, pack of AHP-RAS D180 for RAS 180, with plastic bristles, pack of Circular brush RB-D115/M14 RAS 115 for RAS 115, braided, for paint and dust removal, cleaning areas, in self-service display pack 13 Cup brush TB-D80/M14 RAS 115 for RAS 115, for removing rust and dross, for clean metallic surfaces, waved TB-D65/M14 RAS 115 for RAS 115, braided, for paint and rust removal and cleaning surfaces 14 Spark trap for dust extractor D 50 FL for CT/CTL/CTM SYSTAINER T-LOC SYS-STF D115 with insert for abrasive Ø 115 mm, SYSTAINER size SYS 1 T-LOC

40 PLANEX LHS 225 LEX 2 LRS Accessories and consumables. Sanding pad/cushioning Brush segments Abrasives Long-reach sander PLANEX LHS 225 Ergonomically-designed workstation Storage Dust extraction Cushioning Perfect result Compressed air eccentric sander LEX Sanding pads Abrasives Efficient dust extraction Compressed air eccentric sander LEX Compressed air eccentric sander LEX Sanding pads Abrasives Compressed air orbital sander LRS 93 Sanding pad Abrasives Compressed air orbital sander LRS

41 More system accessories and consumables are available at or in the main catalogue. Long-reach sander LHS Scope of delivery StickFix sanding pad Ø 215 mm, in a SYSTAINER SYS MAXI LHS 225 EQ-Set/IP GB 110V + 2 interface pads, 25 StickFix sanding discs, mobile dust extractor CTL 36 E AC PLANEX LHS 225/CTM 36 E AC Set + 25 StickFix sanding discs, mobile dust extractor CTM 36 AC PLANEX LHS 225 EQ-Set GB 110V + 2 interface pads, 25 StickFix sanding discs, mobile dust extractor CTL 36 E AC PLANEX LHS 225-IP/CTM 36 E AC Set GB 110V + 2 interface pads, 25 Stick Fix sanding discs, mobile dust extractor CTM 36 AC PLANEX LHS 225 EQ Plus/IP GB 110V + 2 interface pads, StickFix abrasive mix LHS 225 EQ-Plus GB 240V + StickFix abrasive mix LHS 225 EQ-Plus GB 110V + StickFix abrasive mix Compressed air eccentric sander LEX 2 Scope of delivery bottle of cleaning and lubricating oil LD-10 (50 ml), operating tool, in a box LEX 2 125/3 + StickFix sanding pad Ø 125 mm (extra-soft) LEX 2 125/7 + StickFix sanding pad Ø 125 mm (soft HT) LEX 2 150/3 + StickFix sanding pad Ø 150 mm (extra-soft) LEX 2 150/7 + StickFix sanding pad Ø 150 mm (soft HT) LEX 2 150/11 + StickFix sanding pad Ø 150 mm (soft HT) LEX 2 185/7 + StickFix sanding pad Ø 185 mm (soft) Compressed air orbital sander LRS Scope of delivery Note: The IAS 2 connection system is required for operation, bottle of cleaning and lubricating oil LD-10 (50 ml), in a box LRS 93 M StickFix sanding pad 93 x 175 mm (soft) LRS 400 StickFix sanding pad 80 x 400 mm (soft) Accessories LHS LEX LRS Scope of delivery 1 Sanding pads for LHS 225, for general use, Ø 215 mm ST-STF-D215/8-LHS 225 Use on flat areas, temperatureresistant fastener, for robust use ST-STF-D215/8-IP-LHS 225 well-suited for arched areas, incl. 2 interface pads Sanding pads for LEX 2 125, connecting thread M8 ST-STF-LEX 125/90/8-M8 H hard version, high edge strength, for flat surfaces and narrow edges ST-STF-LEX 125/90/8-M8 W-HT soft version, temperature-resistant fastener, for general use on flat and curved surfaces ST-STF-LEX 125/90/8-M8 SW extra-soft version, elasticated structure, for pronounced arches and curves Accessories LHS LEX LRS Scope of delivery 2 Interface pad IP-STF-D215/8/2x for use with sanding pad , Ø 215 mm, pack of 2 Interface pad as a cushioning element between sanding disc and sanding pad, for sanding curved parts and extra-fine sanding IP-STF-D120/90/8 for LEX 2 125, height 15 mm, Ø 120 mm, bolt circle Ø 90 mm IP-STF D 150/17 MJ for LEX 2 150, MULTI-JETSTREAM, height 15 mm, Ø 145 mm 3 Brush segment BS-LHS 225 for LHS 225, detachable part of the brush strip from PLANEX LHS 225 EQ sanding head Brush insert BE-LHS 225 for LHS 225, as a replacement for worn brush strip For abrasives please refer to page 20 and visit for part numbers 5 SYSTAINER T-LOC SYS-STF D125 with insert for abrasive Ø 125 mm, SYSTAINER size SYS 1 T-LOC SYSTAINER T-LOC SYS-STF D150 with insert for abrasive Ø 150 mm, SYSTAINER size SYS 3 T-LOC SYSTAINER T-LOC SYS-STF D225 with insert for abrasive Ø 225 mm, SYSTAINER size SYS 4 T-LOC SYSTAINER T-LOC SYS-STF 93x178/93V with insert for abrasive 93 x 178 mm, SYSTAINER size SYS 2 T-LOC 6 Extension VL-LHS 225 for LHS 225, length 500 mm harness TG-LHS 225 harness, additional handle, in a SYSTAINER MAXI SYS 8 SYSTAINER SYS-LHS 225 SYSTAINER size SYS MAXI Tool holder WHR-CT 36-LHS 225 for CT 36 PLANEX, with practical carrier handle, for storing PLANEX For CT AC mobile dust extractors see the product brochure on dust extraction, our main catalogue or visit 11 plug it-cable H05 RN-F/4 rubber cable 240 V plug it, length 4 m Guide control black powder HB set for the optical control of the area being sanded, sanding block, 2 cartridges of guide control black powder, weight 2 x 30 g, in a box Refillable cartridge 2x30 g Refill pack for guide control black powder HB set, weight 2 x 30 g, in a box 13 Stickfix sanding pad SSH-STF-93x175/8 for LRS 93, dimensions 93 x 175 mm 14 Sanding pad SSH-93x175/8 for LRS 93, for abrasive for clamping, dimensions 93 x 175 mm 15 Stickfix sanding pad SSH-STF-V93x266/14 for LRS 93, iron-shaped sanding pad, dimensions 93 x 266 mm 16 Hole punch 8L 93x175 for LRS 93, for creating Festool hole pattern, no. of holes 8, dimensions 93 x 175 mm 17 Sanding pad SSH-STF-80x400/17 for LRS 400, soft, dimensions 80 x 400 mm Sanding pads for LEX see sanding pad with Ø 150 mm on page 33 Sanding pads for LEX 2 185, connecting thread M8 ST-STF-D185/16-M8 W soft version, for general use on flat and arched surfaces ST-STF-D185/16-M8 SW extra-soft version, elasticated structure, for pronounced arches and curves 41

42 RAP 80 SHINEX RAP 150 POLLUX 180 SURFIX Accessories and consumables. Brushing Rotary polisher RAP 80 Polishing pads Rotary polisher SHINEX RAP 150 Rotary polisher POLLUX 180 Natural oils sponges, cloths, pads SURFIX oil dispenser Rotary polisher RAP POLLUX Scope of delivery RAP E StickFix backing pad Ø 70 mm for PoliStick max. Ø 80 mm, additional handle, in a box SHINEX RAP 150 additional handle, StickFix backing pad Ø 125 mm for PoliStick max. Ø 150 mm RAP 150 FE GB 240V RAP 150 FE GB 110V RAP 150 FE-Set self-adhesive sanding disc mix Titan 2, Platin 2 mix Ø 80 mm, Titan 2 mix Ø 77 mm, spot sander, polish MPA 5000, polish MPA 11000, PoliStick foam polishing pad Ø 150 mm, orange, medium, PoliStick foam polishing pad Ø 150 mm, black, extra fine, waffle face, PoliStick premium sheepskin Ø 150 mm, 2 microfibre cloths, finish cleaner, in a SYSTAINER SYS MAXI RAP 150 FE-Set wood self-adhesive sanding disc mix Titan 2, abrasive mix Titan/Platin Ø 150, spot sander, polish MPA , polish MPA 8000, PoliStick foam polishing pad Ø 150 mm, orange, medium, PoliStick foam polishing pad Ø 150 mm, black, extra-fine, PoliStick premium sheepskin Ø 150 mm, 2 microfibre cloths, finish cloths, in a SYSTAINER SYS MAXI POLLUX 180 E StickFix backing pad Ø 165 mm for PoliStick max. Ø 188 mm, additional handle, in a box SURFIX oil dispenser Scope of delivery SURFIX oil dispenser oil pad, base plate, in white tin OS Set HD 0.3 l Heavy-duty oil bottle, 0.3 l OS Set OS 0.3 l One-step oil bottle, 0.3 l OS Set OD 0.3 l Outdoor oil bottle, 0.3 l Oil dispenser OS-SYS3 Set oil dispenser OS set HD 0.3 l, One-step oil bottle 0.3 l, Outdoor oil bottle 0.3 l, 5x oil pads, x sanding cloth (green), 5x sanding cloth (white), 10x sanding discs STF-D150 P180 RU, 10x sanding discs STF-D150 P240 BR2, in a SYSTAINER SYS 3 T-LOC Ready for oiling: Everything that you need to start oiling straight away from oils, pads, sanding discs to sanding cloths is contained in the practical SURFIX Systainer. Visit to view these and many other products. 42

43 More system accessories and consumables are available at or in the main catalogue. Polishing accessories Accessories RAP SURFIX Scope of delivery 1 Polishing pads fits polishing accessories, with integrated shock absorber for optimum distribution of pressure during polishing PT-STF-D80-M14 for RAP 80, Ø 70 mm, height 20 mm PT-STF-D150-M14 for RAP 150, Ø 125 mm, height 25 mm PT-STF-D180-M14 for RAP 180, Ø 165 mm, height 30 mm Clamping nut SM-M14/D115 for RAP 80, for mounting Fiberfix sanding discs 3 Adapter AD-D10/M14 for Festool stirring rods: for holding in chuck, for sanding pads with M14 threaded connection for holding in drills, for backing pads Ø 80 for holding in cordless drills, clamping flange Ø 10 mm 4 Circular brush RB-D115/M14 RAS 115 for RAP 80, braided, for paint and rust removal, cleaning surfaces, in self-service display pack 5 Cup brush for RAP 80 TB-D80/M14 RAS 115 for removing rust and dross, for clean metallic surfaces, waved TB-D65/M14 RAS 115 plaited, for removing paint, rust, and for cleaning surfaces for foam polishing pad, cloths, polishing felt and sheepskin pads please refer to the Festool main catalogue or visit 7 For polish and other polishing agents please refer to the Festool main catalogue or visit 1-step MPA 5000/1 Speed Cut 1-step sanding polish, silicone-free, high abrasiveness and high-gloss finish in one step, 500 ml bottle MPA 8000 Fine-sanding polish, silicone-free 500 ml bottle ml bottle, pack of Canister capacity 5 kg Spot sander RH-SK D 36/1 for self-adhesive sanding D For self-adhesive sanding discs, Titan 2, grit P and order numbers please visit 9 Spot repair scraper, LZK-HM for the removal of trapped particles in paint, made from carbide; with cord Size 25 x 30mm Accessories RAP SURFIX Scope of delivery 10 Microfibre cloth MPA-Microfibre/2 for perfect clear coat finish, for removing polish residue and finger prints, pack of 2 11 Finish cleaner MPA-F for removing polish residue and grease spots, 500 ml bottle 12 Natural oil RF 0.3 l bottle, pack of 2 RF HD 0,3 l/2 Heavy-duty oil RF OS 0,3 l/2 One-step oil RF OD 0,3 l/2 Outdoor oil Natural oil RF Filling quantity 5 l, in canister RF HD 5l/1 Heavy-duty oil RF OS 5l/1 One-step oil RF OD 5l/1 Outdoor oil oil pad OS-STF 125X125/5 StickFix pad for oil dispenser SURFIX, pack of 5, dimensions 125 x 125 mm 15 Cleaning cloth RT PREMIUM 240x380/200 Roller with sheets, in a dispenser box, fibre-reinforced, tear-resistant and extremely absorbable 16 Oil dispenser OS-SYS3 Set oil dispenser OS set HD 0.3 l, One-step oil bottle 0.3 l, Outdoor oil bottle 0.3 l, 5x oil pads, 5x sanding cloth (green), 5x sanding cloth (white), 10x sanding discs STF-D150 P180 RU, 10x sanding discs STF-D150 P240 BR2, in a SYSTAINER SYS 3 T-LOC Sanding cloth STF for sanding and even distribution of oil on the surface, grit green, pack of 10 STF D125/0 green/10 Ø 125 mm STF D150/0 green/10 Ø 150 mm Polishing fleece for follow-up polishing and additional surface finishing, without grit, grit white, pack of 10 STF D125/0 white/10 Ø 125 mm STF D150/0 white/10 Ø 150 mm