BELL. RACO, TayMac and BELL offer a full line of electrical products that are ideally suited to help you complete your next solar project
|
|
|
- Deirdre Cole
- 6 years ago
- Views:
Transcription
1 SOLAR RACO, TayMac and BELL offer a full line of electrical products that are ideally suited to help you complete your next solar project Commercial, Industrial and Residential Electrical Products RACO TAYMAC BELL
2 RACO fittings are the perfect solar solution whether you need to couple, connect, fasten, or ground conduit and cable. Fittings are designed to save time on the job RACO Liquidtight and Raintight series fittings are UL approved for wet locations Insulated throats protect conductors during wire pulling Premium set screws provide reliable continuity of ground Locknuts won t slip or spin Liquidtight Fittings Patented split gland-ring prevents pullouts. It is flexible and designed for quick and easy installation. All components are reusable May be disassembled and reused after years of service Sealing washer and locknut are included with every connector Durable Steel/Malleable Iron construction ½ 4 trade sizes in Straight and 90 degree; ½ 2 trade sizes in 45 degree Suitable for use in Class I, Div 2; Class II, Div 1 & 2; Class III, Div 1 & 2 hazardous locations UL Listed E195969; CSA Listed C22.2 #18 Die Cast Zinc Threaded HubS RT EMT Compression connectors Malleable iron Grounding Bushing Wet or dry locations For use with threaded Rigid/IMC conduit Rugged Die Cast construction O-ring seals the assembly providing a raintight seal ½ 4 trade sizes available UL Listed E195969; CSA Listed C22.2 #18 RACO EMT Raintight Series connectors and couplings are designed to comply with the requirements of the 2008 NEC and Durable all-steel construction with zinc electroplate finish Knockout seal and locknut are included with every connector No need for special tools or torque wrench for proper installation Blue tinted nuts for quick identification ½ 4 trade sizes available culus Listed E195970, C22.2 #18 For use with threaded Rigid/IMC conduit Insuliner temperature rated at 150 C Lay-in and Feed-thru lug styles available Dual rated aluminum grounding lugs may be used with copper or aluminum grounding conductors Zinc electroplated malleable iron construction ½ 4 trade sizes available UL Listed, CSA Listed C22.2 #18 For use with threaded Rigid/IMC conduit
3 BELL and TayMac offers a full line of weatherproof electrical products that are ideally suited to the solar solution. BELL Boxes State of the art powder coat finish Eight box mounting options with detachable lug Closure plugs included Ground Screw installed UL Listed, CSA Listed C22.2 #18 Metal Device and Blank Covers Rugged Metal Construction State of the art powder coat finish Installation hardware, gasket and instructions included UL Listed Metallic In-Use Covers Extra Duty Premium powder coat finish on die cast material. Patented Quick-Fit keyhole mounting system allows for installation in under a minute. Preconfigured for a GFCI and includes patented Universal-Fit adapters for customer fitting to multiple receptacles and switches. Lockable open or closed. UL Listed, meets Extra Duty Non-Metallic In-Use Covers Extra Duty High impact polycarbonate construction Patented Quick-Fit keyhole mounting system allows for installation in under a minute Preconfigured for a GFCI and includes patented Universal-Fit adapters for customer fitting to multiple receptacles and switches. Horizontal or Vertical mount UL Listed, meets Extra Duty
4 NEMA 3R Enclosures E Series Conduit Bodies C-Taps
5 WIEGMAN Part # RSCG RSCG RSC RSCG RSC RSC RSC SC HS444NK HS664NK HS665NK BURNDY Part # YC2L12 YC3L12 YC4L12 YC6L12 YC8L12 RSC Gutter, NEMA 3R, 4X4X36 RSC Gutter, NEMA 3R, 4X4X48 RSC Rainproof NEMA3R CS 4X4X4 RSC Gutter, NEMA 3R, 6X6X48 RSC Rainproof NEMA3R CS 6X6X4 RSC Rainproof NEMA3R CS 6X6X6 RSC Rainproof NEMA3R CS 8X8X6 SC Pull Box CS 6X6X4 WW, HC, SC No KO's CS 4X4X48" WW, HC, SC No KO's CS 6X6X48" WW, HC, SC No KO's CS 6X6X60" COPPER COMPRESSION C TAP 4 AWG (RUN) 4 AWG (TAP) COPPER COMPRESSION C TAP 5-4 AWG (RUN) 6-5 AWG (TAP) COPPER COMPRESSION C TAP 6 AWG (RUN) 6-8 AWG (TAP) COPPER COMPRESSION C TAP 8 AWG (RUN) 10-8 AWG (TAP) COPPER COMPRESSION C TAP 10 AWG (RUN) 10 AWG (TAP) KILLARK Part # EAC-1CGN E-PAK 1/2" C 10 PER EAC-2CGN E-PAK 3/4" C 10 PER EAC-3CGN E-PAK 1" C 5 PER EALB-1CGN E-PAK 1/2" LB 10 PER EALB-2CGN E-PAK 3/4" LB 10 PER EALB-3CGN E-PAK 1" LB 5 PER EALB-4CGN E-PAK 1-1/4" LB 2 PER EALB-5CGN E-PAK 1-1/2" LB 2 PER EALB-6CGN E-PAK 2" LB 1 PER EALB-7CGN E-PAK 2-1/2" LB 1 PER EALL-1CGN E-PAK 1/2" LL 10 PER EALL-2CGN E-PAK 3/4" LL 10 PER EALL-3CGN E-PAK 1" LL 5 PER EALR-1CGN E-PAK 1/2" LR 10 PER EALR-2CGN E-PAK 3/4" LR 10 PER EALR-3CGN E-PAK 1" LR 5 PER EAT-1CGN E-PAK 1/2" T 10 PER EAT-2CGN E-PAK 3/4" T 10 PER EAT-3CGN E-PAK 1" T 5 PER BL-90-2 ELBOW, MALE/FEM 90 DEG AL 3/4" BL-90-3 ELBOW, MALE/FEM 90 DEG AL 1" EALL " LL BODY THREADED EALL-5 1.5" LL CONDUIT BODY THREADED EALR-2 1/4" LR CONDUIT BODY THREADED EALR " LR BODY THREADE EALR-5 1-1/2" LR CONDUIT BODY THREADED EGKN-1 1/2" RUB GASK E SERIES 100 PER EGKN-2 3/4" NEOPRENE GASKET EGKN-3 1" RUB GAS E SERIES 100 PER EGKN " NEOPRENE GASKET EGKN-5 2" NEOPRENE GASKET
6 RACO Part # SQUARE BO X WITH FM BRACKET 2-1/8DP 1/2-3/4-TKO STEEL 860 HANDY BOX COVER 4x2 BLANK STEEL 1003 LOCKNUT RGD/IMC CONDUIT 3/4" STEEL 1135 BSHG GRND FDTHRU 1-1/4" INSULATED 150 DEGREES C 1142 REDUCING BUSHING 3/4" to 1/2" 1143 REDUCING BUSHING 1" to 1/2" STEEL 1144 REDUCING BUSHING 1" to 3/4" STEEL 1145 REDUCING BUSHING 1-1/4" to 1/2" STEEL 1162 REDUCING BUSHING 2-1/2" to 2" 1193 LOCKNUT RGD/IMC CONDUIT 3/4"NON-UL STEEL 1194 LOCKNUT RGD/IMC CONDUIT 1" NON-UL STEEL 1195 LOCKNUT RGD/IMC CONDUIT 1-1/4" NON-UL STEEL 1203 LOCKNUT SEALNG RIGID/IMC CONDUIT 3/4" STEEL 1204 LOCKNUT SEALNG RIGID/IMC CONDUIT 1" STEEL 1205 LOCKNUT SEALNG RIGID/IMC CONDUIT 1-1/4" STEEL 1206 LOCKNUT SEALNG RIGID/IMC CONDUIT 1-1/2" STEEL 1208 LOCKNUT SEALNG RIGID/IMC CONDUIT 2" STEEL 1212 BUSHING GROUND FEED-THRU 1/2" INSULATED 150 DEGREES C 1213 BUSHING GROUND FEED-THRU 3/4" INSULATED 150 DEGREES C 1214 BUSHING GROUND FEED-THRU 1" INSULATED 150 DEGREES C /2" 90 DEGREE DIE CAST ZINC EMT CONNECTOR 1365 REDUCING WASHER 3/4"-to-1/2" STEEL 1366 REDUCING WASHER 1"-1/2" STEEL 1367 REDUCING WASHER 1"-to-3/4" STEEL 1370 REDUCING WASHER 1-1/4"-to-1" STEEL 1404 PLASTIC BUSHING 1" 105 DEGREES C " RIGID OFFSET NIPPLE 1483 FLEXIABLE COUPLING-to-EMT COMB 3/4" DIE CAST 1665 CONDUIT NIPPLE 1-1/4" NON-INSULATED DIE CAST 1702 HUB RIGID/IMC 1/2" DIE CAST INSULATED KB 1703 HUB RIGID/IMC 3/4" DIE CAST INSULATED 1704 HUB RIGID/IMC 1" DIE CAST INSULATED 1705 HUB RIGID/IMC 1-1/4" INSULATED DIE CAST 1706 HUB RIGID/IMC 1-1/2" INSULATED DIE CAST 1708 HUB RIGID/IMC 2" INSULATED DIE CAST 1808 CONNECTOR RIGID/IMC COMPRESSION 2" IRON/STEEL 1810 CONNECTOR RIGID/IMC COMPRESSION 2-1/2" IRON/STEEL 2004 CONNECTOR EMT SET SCREW 1" STEEL 2005 CONNECTOR EMT SET SCREW 1-1/4" STEEL 2006 CONNECTOR EMT SET SCREW 1-1/2" STEEL 2008 CONNECTOR EMT SET SCREW 2" STEEL 2023 COUPLING EMT SET SCREW 3/4" STEEL /4" EMT COMPRESSION CONNECTOR " RIGID EMT CONDUIT HANGER /4" STAMPED STEEL 1 HOLE PUSH ONE STRAP " STAMPED STEEL 1 HOLE PUSH ONE STRAP 2123 CONNECTOR EMT SET SCREW 3/4" INSULATED STEEL 2124 CONNECTOR EMT SET 1" INSULATED STEEL 2204 CONNECTOR FLEX AC/MC 90 DEGREE SQUEEZE 1" IRN 2273 COUPLING FLEX SCREW-IN 3/4" STEEL 2283 CONNECTOR FLEX AC/MC SCRW-IN 3/4" STEEL RACO Part # 2410 ENTERENCE HEAD WITH CLAMP RIGID/IMC/EMT 2-1/2" ALUMINUM 2504 GROUND CLAMP 1/2",3/4",1" PIPE # GROUND CLAMP 1-1/4",1-1/2",2" PIPE # GROUND CLAMP 1/2"RGD CNDT 1/2" to 1" PIPE 2603 CONNECTOR EMT SET SCREW 3/4" DIE CAST 2604 CONNECTOR EMT SET SCREW 1" DIE CAST 2605 CONNECTOR EMT SET SCREW 1-1/4" DIE CAST 2606 CONNECTOR EMT SET SCREW 1-1/2" DIE CAST 2608 CONNECTOR EMT SET SCREW 2" DIE CAST 2624 COUPLNG EMT SET SCREW 1" DIE CAST 2634 CONNECTOR EMT SET SCREW 1/2" INSULATED DIE CAST 2635 CONNECTOR EMT SET SCREW 3/4" INSULATED DIE CAST 2636 CONNECTOR EMT SET SCREW 1" INSULATED DIE CAST 2637 CONNECTOR EMT SET SCREW 1-1/4" INSULATED DIE CAST 2638 CONNECTOR EMT SET SCREW 1-1/2" INSULATED DIE CAST 2639 CONNECTOR EMT SET SCREW 2" INSULATED DIE CAST 2654 HANDY ELL RIGID 90 DEGREES 1" FEMALE THREAD DIE CAST 2693 CONNECTOR FLEX AC/MC 90DEG SQZ 3/4" DIE CAST 2694 CONNECTOR FLEX AC/MC 90DEG SQZ 1" DIE CAST 2753 HANDY ELL COUPLING EMT 90DEG 3/4" FEMALE SET SCREW DIE CAST 2805 CONNECTOR EMT COMPRESSION 1-1/4" DIE CAST " DIE CAST ZINC NON-METALLIC SHEATHED CORD CONNECTOR " STEEL UNINSULATED COMPRESSION CONNECTOR " STEEL UNINSULATED COMPRESSION CONNECTOR 2913 CONNECTOR EMT COMPRESSION INSULATED 3/4" STEEL 2923 COUPLNG EMT COMPRESSION 3/4" STEEL 3028 COUPLNG RIGID/IMC SET SCREW 2" STEEL SQUARE BOX WITH TS BRACKET 2-1/8DP 1/2-3/4-TKO STEEL 2003 CONNECTOR EMT SET SCREW 3/4" STEEL 2004 CONNECTOR EMT SET SCREW 1" STEEL 2905RT CONNECTOR EMT COMPRESSION RAINTIGHT 1-1/4" STEEL 2906RT CONNECTOR EMT COMPRESSION RAINTIGHT 1-1/2" STEEL 2908RT CONNECTOR EMT COMPRESSION RAINTIGHT 2" STEEL 2912RT CONNECTOR EMT COMPRESSION RAINTIGHT INSULATED 1/2" STEEL 2913RT CONNECTOR EMT COMPRESSION RAINTIGHT INSULATED 3/4" STEEL 2914RT CONNECTOR EMT COMPRESSION RAINTIGHT INSULATED 1"TS STEEL 2915RT CONNECTOR EMT COMPRESSION RAINTIGHT INSULATED 1-1/4" STEEL 2916RT CONNECTOR EMT COMPRESSION RAINTIGHT INSULATED 1-1/2" STEEL 2918RT CONNECTOR EMT COMPRESSION RAINTIGHT INSULATED 2"TS STEEL 2922RT COUPLING EMT COMPRESSION RAINTIGHT 1/2" STEEL 2923RT COUPLNG EMT COMPRESSION RAINTIGHT 3/4" STEEL 2924RT COUPPLNG EMT COMPRESSION RANTIGHT 1" STEEL 2925RT COUPLNG EMT COMPRESSION RANTIGHT 1-1/4" STEEL 2926RT COUPLNG EMT COMPRESSION RANTIGHT 1-1/2" STEEL 2928RT COUPLNG EMT COMPRESSION RAINTIGHT 2" STEEL WEATHER PROOF BOX 2-GANG (7)3/4 OUTLETS GREY MM410C SINGLE GANG 16 IN 1 WHILE-IN-USE COVER MM2410C DOUBLE GANG 55 IN 1 WHILE-IN-USE COVER ML450G SINGLE GANG 16 IN 1 EXPANDABLE COVER MX4208S METAL LOW PROFILE IN-USE HORIZONTAL COVER 8 IN 1 MX4380S METAL LOW PROFILE IN-USE VERTICAL COVER 8 IN 2 Commercial, Industrial and Residential Electrical Products electrical products A Division of Hubbell Incorporated (Delaware) 2014 Hubbell Incorporated (Delaware)
RACO Commercial Fittings
RACO Commercial Fittings B2 GENERAL INFORMATION - STANDARDS, 1999 NATIONAL ELECTRICAL CODE General Information When you need to couple, connect, fasten, or ground conduit or cables, RACO fittings are your
RACO Commercial Fittings
06 Pg B1 - B20.qxp 6/9/2008 9:47 AM Page B1 RACO Commercial Fittings 06 Pg B1 - B20.qxp 6/9/2008 9:47 AM Page B2 B2 dbkbo^i=fkcloj^qflk=j=pq^ka^oapi=ommu=k^qflk^i=bib`qof`^i=`lab déåéê~ä=fåñçêã~íáçå tüéå=óçì=åééç=íç=åçìéäéi=åçååéåíi
U CON DUIT CODEGUARD. 10-IN-1 UNIVERSAL CONDUIT BODY for RIGID/IMC or EMT. Service Truck Solutions
U CON DUIT CODEGUARD MKG420CS 10-IN-1 UNIVERSAL CONDUIT BODY for RIGID/IMC or EMT Configures to all standard bodies ( LB, LR, LL, T, C ) Three 1/2" threaded hub weatherproof box Space Saver! & Trip Saver!
Conduit End Bells...EA1 Hex Reducing Bushings...EA2 Conduit Hubs...EA3-EA4. Split Couplings...EA5 Three Piece Couplings...EA6 Conduit Nipples...
SECTION E INDEX Product Description Page Number Conduit End Bells.......................................EA Hex Reducing Bushings..................................EA2 Conduit Hubs......................................EA-EA4
COMMERCIAL AND INDUSTRIAL FITTINGS: CAST DEVICE BOXES. Applications
Blank Bodies for Brazed Hubs UNILETS for Use with Threaded Rigid Metal Conduit and IMC. Available with Hub Sizes from 1/2 through 1-1/2 (Union 1/2 through 1-1/4 ). Furnished with Internal Ground Screw.
Series 5 Die Cast Aluminum Conduit Outlet Bodies, Covers and Gaskets
Eaton's Crouse-Hinds Series 5 die cast copper-free aluminum conduit bodies, covers and gaskets are available for use with rigid or EMT conduit (with set screw). Conduit bodies are available in trade sizes
commercial and industrial fittings: cast DEVICE BOXES Applications Illustrated Features
UNILETS for use with Threaded Rigid Conduit and IMC. All Device Boxes have Construction. Furnished with Internal Ground Screw. Applications Accommodate wiring devices such as switches and receptacles.
tings fi t fl ex/mc/ac
22 flex/mc/ac fittings Nothing can be more frustrating than losing valuable time due to low quality fittings. Madison s Flex/AC/ MC fittings come through for you time after time. Giving you affordability
Description Cast Device Box, Height Inch; Width 2.81 Inch; Depth 2.69 Inch; Capacity 25 Cu Inch; 1 Gang; 2 Hub(S); Hub Location End;
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 1100 1G Mall Box Appleton/Oz Gedney Catalog Number 1100 Manufacturer Appleton/Oz Gedney Description Cast Device Box, Height
FSK1VDRA 1G Al DPLX RCPT CVR
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 FSK1VDRA 1G Al DPLX RCPT CVR Appleton/Oz Gedney Catalog Number Manufacturer Weight per unit Product Category FSK1VDRA
GLOSSARY OF ELECTRICAL INDUSTRY TERMS
A ADD-A-DEPTH RING a means of extending the walls of a device box to the wall surface, providing a barrier between a wiring device and the surrounding wall material. AIR PLENUM a compartment or chamber
Floor Boxes. Concealed Service Floor Boxes. Engineering Data 663 Series. Faces Plates for 663 Floor Box. 663 Series Floor Box
Concealed Service Floor Boxes 663 Series Floor Box 663-SC Multiple service floor box that delivers power, communications and data from standard conduit with no exposed service fitting Result: Open office
E.M.T. Set-Screw Connectors. Technical Specifications
Set-Screw onnectors Regular Insulated I5404 (-IT) / I5408 (-IT) Steel Locknut I5004 (-IT) / I5008 (-IT) I5020 (-IT) / I5032 (-IT) I5410 (-IT) / I5432 (-IT) Steel Locknut I5010 (-IT) / I5016 (-IT) I5054
NEER Zinc Cable and Conduit Connectors For Flexible Metal Conduit
For Flexible Metal Conduit SC: Straight Squeeze Type Connector These squeeze type connectors are used to terminate flexible metal conduit to a 1/2 knockout in a dry location box or enclosure. 1/2" and
Ground Clamps Cable Tray
commercial and industrial fittings: ing Fittings and Solderless Connectors Clamps Cable Tray Terminates ground wire to cable tray. For aluminum or copper conductors. 1 4 hex wrench tightens both tray and
Iberville. Commercial Grade Fittings EMT CI5410 / CI5432 CI5410IT / CI5432IT CI5404 / CI5408 CI5404IT / CI5408IT CI5004 (-IT) / CI5008 (-IT)
ommercial Grade Fittings Set-Screw Fittings I5404 / I5408 I5404IT / I5408IT I5004 (-IT) / I5008 (-IT) I5410 / I5432 I5410IT / I5432IT I5010 (-IT) / I5016 (-IT) Regular Insulated Set-Screw Fittings (Steel)
Zinc Cable & Conduit Connectors For Armored Cable, Flexible Metal Conduit & Metal Clad Cable
For Armored Cable, Flexible Metal Conduit & Metal Clad Cable Type AC 90 2-Screw Clamp To make a 90 termination of conduit or cable to a knockout or unthreaded slip hole in a dry location box or enclosure.
05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes
05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A75 RACO Floor Boxes 05 Pg A75-90.qxp 6/9/2008 9:36 AM Page A76 A76 pq^ka^oapi=ommu=k^qflk^i=bib`qof`^i=`lab Δ déåéê~ä=^ééäáå~íáçåë o^`l=ñäççê=äçñéë=~êé=áçé~ääó=ëìáíéç
INTERMEDIATE METAL CONDUIT
PRODUCT GUIDE 08 CONDUIT PIPES CONDUIT FITTINGS FITTINGS FOR FLEXIBLE CONDUITS METALLIC ELECTRICAL BOXES AND COVERS CONDUIT BODIES WEATHERPROOF BOXES AND COVERS CHANNELS & SUPPORTS METAL ENCLOSURES CHANNELS
Steel City Comparison & Strategy. vs. T&B Liquidtight Fittings. Andrea Briggs. Associate Product Manager - Conduit & Fittings FOR INTERNAL USE ONLY
Comparison & Strategy Andrea Briggs Associate Product Manager - Conduit & Fittings Liquidtight Fitting Brand Strategy Component Comparisons Summary Liquidtight Fitting Brand Strategy Steel City Liquidtight
Copper Tubing Hangers Clevis Hangers. Copper Tubing Hangers
Copper Tubing Hangers Clevis Hangers Copper Tubing Hangers Fig. CT-69 Adjustable Swivel Rug Fig. CT-138R Fig. CT-65 Fig. CT-109 Extension Split Light Weight Adjustable Clevis Fig. CT-99 & CT-99C Split
Beam and Purlin Clamps Beam Clamps
Metal Framing & Cable Tray Steel City Hangers, Clamps & Fasteners Beam and Purlin Clamps Beam Clamps Fits beam flanges to 2" Supports 4" and 8" threaded rod, S-hooks, electrical boxes, conduit and bridle
MECKLENBURG COUNTY. Land Use and Environmental Service Agency Code Enforcement 9/8/10 ELECTRICAL CONSISTENCY MEETING. Code Consistency Questions
conduit? 9/8/10 ELECTRICAL CONSISTENCY MEETING Code Consistency Questions 1. Can branch circuits of different services be installed in the same Yes, see 300.3(C)(1) for conductors of different systems
Nemalux INSTALLATION INSTRUCTIONS APPLICATION 1-4
I N D U S T R I A L rev. A- INSTALLATION INSTRUCTIONS *PENDING* E77827 E77827 APPLICATION MR3 & MR6 Luminaires are suitable for use in the following areas as defined by the National Electrical Code (NEC)
Index Pipe Hangers and Straps
Index Pipe Hangers and Straps Fig. 1 Standard Clevis Hanger MSS-SP-69, Type 1 WW-H-171E, Type 1 Page 14 Fig. 1CI Clevis Hanger for A.W.W.A. Page 16 Fig. 81 Clevis Hanger WW-H-171E, Type 12 Page 70 Fig.
Rigid PVC Conduit Fittings Injection Molded in Sizes 1/2-6
Rigid PVC Conduit Fittings Injection Molded in Sizes / - E Royal Building Products offers a complete line of rigid PVC conduit fittings. Royal s non-metallic conduit and fittings are certified by the CSA
Rigid PVC Conduit Fittings Injection Molded in Sizes 1/2-6
Rigid PVC Conduit Fittings Injection Molded in Sizes / - Royal Building Products offers a complete line of rigid PVC conduit fittings. Royal s non-metallic conduit and fittings are certified by the CSA and
content Introduction Some good reasons to use SMARTr products Reducers, Plugs Conduit Reducer Stopping Plug
CONTENT 1 2 Introduction Some good reasons to use SMARTr products G.I. CONDUITS SMARTr BS4568 : PT1 : 1970 Class 4, IEC 61386-21 : 2004 IEC60614-2 - 1 : 1993, BS EN 50086-2 -1 : 1996 SMARTr BS4568 : PT1
Round/Octagon Boxes and Accessories
Round/Octagon Boxes and Accessories 4" Round Boxes DEPTH BOTTOM CAT. NO. (IN.) CAPACITY DESCRIPTION CONDUIT CTN. 56111 1 2 6.0 Steel outlet box 4 1 2 50 56111-CFB* 1 2 6.0 Ceiling fan box with plastic
Wrenches. Wrenches. F o r P. r o f e. s s i o. n a l s. .. S i. n c e 1
F o r P r o f e Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength, and long working life. Regardless of the job type, Klein has a wrench that will help
PIPE/CONDUIT SUPPORTS
PIPE/CONDUIT SUPPORTS Pipe/Conduit Clamps...102-105 Unicushion... 106 Pipe & Tubing (Cush-A-Clamp ) Clamps...107-110 Pipe Hangers... 111 Pipe Rollers...111-112 Pipe Brackets... 113 Reference Tables...114-120
Available in high-capacity. and assembled by hand for smooth operation. Durable chrome-plated finish. Heat-treated for long life.
Klein s line of wrenches are forged from the finest steel and are designed to deliver great strength and long working life. Regardless of the job type, Klein has a wrench that will help the professional
ELECTRIC GROUNDING AND WIRING REQUIREMENTS BOOTHS-METAL
BELL SYSTEM PRACTICES Plant Series SECTION 508-100-100 Issue 3, October 1970 AT&TCo Standard ELECTRIC GROUNDING AND WIRING REQUIREMENTS BOOTHS-METAL I. GENERAL 1.01 This section is reissued to: Revise
TRANSMITTAL LETTER. As Builts Change Order Contract Copy of Letter Insurance. For approval Approved as submitted Resubmit copies for approval
Redwood City Electric, Inc. TRANSMITTAL LETTER To: Transworld Construction, Inc. 1178 Folsom Street San Francisco, CA 94103 Date: 05/31/12 Job #: 9340 Regarding: SFO DATA CENTER Attn: Rob Acero We are
Ford Couplings For Pipe And Tubing
Section J 6/2002 Ford Couplings For Pipe And Tubing The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
4.3 Section CONDUIT INSTALLATION ACCESSORIES. Thinking of the environment. Fixing accessories Coupling accessories
CONDUIT INSTALLATION ACCESSORIES Thinking of the environment We use only fully recyclable halogen-free thermoplastics, without harmful additives. No cadmium or asbestos in the colourants either. For total
J-BOX. 3-O or 4-0 MUD RING J-BOX BRACKET BAR CABLE GRIPPER/ CANOPY MOUNTING STUD 8-32 BRACKET BAR SCREWS CANOPY STRAIN RELIEF POWER CORD CANOPY
KELSEY - CSS Cable Suspended Rotational and Static CSS - Cable Suspended 3-O or 4-0 MUD RING BRACKET BAR 1/4-20 STUD 8-32 BRACKET BAR SCREWS STRAIN RELIEF POWER CORD MOUNTING GRIPPER AIRCRAFT CABLE CABLE
Spring Steel Fasteners
Cable Support Supports up to 4 runs of MC and AC cable and up to 6 runs of nonmetallic sheathed cable Installs with nails or staple or sheet metal screws Complies with CEC article 12-516 for all wood and
Thru Wall Floor Seals For New Installation
The O-Z/Gedney Thruwall and Floor Seals provide a positive means of sealing pipe, conduit or tube where they pass through a concrete foundation of a structure below grade or below ground water level or
M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information
![M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information](/thumbs/77/74547895.jpg "M4 Hex Nut [ ] M4 T-Nut 20 [20-044] Appx. 1. 3mm. 20 Series profiles (1 per hole) (1 per hole) Ordering Information")
Handles & Light Duty PA 20 1 Assembly of Hinge M4x8 FHCS [24-208-4] M4 T-Nut 20 [20-044] M4 Hex Nut [24-706-4] 60 300-0 PA 20 on panel 2 Hinge positions 3-4 Clearance dimensions 5 Range of swing FOR M4
Innovative Infrastructure for Electric and Hybrid Vehicles PEDESTAL EXTENSION KIT INSTALLATION GUIDE
Innovative Infrastructure for Electric and Hybrid Vehicles PEDESTAL EXTENSION KIT INSTALLATION GUIDE PLEASE NOTE: This installation guide includes the latest information at the time of printing. ClipperCreek,
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS
International Tube & Conduit Company Ltd. BRITISH STANDARD STEEL CONDUITS & FITTINGS 1 ABOUT THE COMPANY VISION STATEMENT We strive to exceed our customers expectations through leading edge technologies
N Nail on mounting H Face bracket for steel and wood stud mounting QT Quick Thread device hole option 16 Bar hanger max 16 joist spacing
FLEXBOX Features: Residential Units Material Characteristics Allied Moulded Flexbox switch and outlet boxes are molded of engineering grades of non-metallic thermoplastic materials. Our Flexbox line of
Liquid Tight Conduit Connector With Internal Threads, Female Liquid Tight Conduit Fittings ( YCM )
Liquid Tight Conduit Connector With Internal Threads, Female Liquid Tight Conduit Fittings ( YCM ) No. Trade Dimensions (mm) Size I.D. A B C Threads YCM-03 3/8 11.2 28.3 44.6 13.2 PT 1/2 YCM-04 1/2 14.8
Delikon Stainless Steel Liquidtight Connectors offer corrosion resistance and the strength of stainless steel for the highest levels of endurance.
Corrosion Resistant liquid tight conduit fittings for use with flexible liquid tight metallic conduits, flexible liquid tight non metallic or PVC coated flexible metal conduit. * Liquidtight, Raintight,
Ford Water Meter Couplings & Accessories
Section H 2/2001 Ford Water Meter Couplings & Accessories The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 260/563-3171 FAX: 1-800-826-3487 Overseas
2/15/2015. Current will always try to return to its source. In order for there to be current, there must be a complete circuit
Current will always try to return to its source In order for there to be current, there must be a complete circuit Current will take as many paths or circuits available to it to return to the source The
General Information...SA1-SA4
SECTION S INDEX Product Description Page Number General Information................................................................SA1-SA4 Type FSK Thruwall & Floor Seal For Conduit, Pipe or Tubing............................
STANDARD RTD's INDEX
STANDARD RTD's INDEX PAGE General Information... R2 Temperature/Resistance Table... R6 Part Numbering Examples... R10 High Temperature MgO Elements (RA)... R11 Leadwire Style RTD's (RB)... R12 Leadwire
Superstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
SECTION EQUIPMENT WIRING
PART 1 - GENERAL 1.01 RELATED DOCUMENTS: SECTION 26 27 17 EQUIPMENT WIRING A. The Conditions of the Contract and applicable requirements of Divisions 0 and 1 and Section 26 00 01, Electrical General Provisions,
Modular & Hardwired Hub Assembly to "X" and "Y" Posts
Modular & Hardwired Hub Assembly to "X" and "Y" Posts Hardware Package T-Nut Data jack bracket #6 x 1/4" plastite trilobular screw 1/4-20 x 3/4" socket head cap screw #6-32 x 1/4" pan head screw #10-32
The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. Hand or power. kpa/34.
MUELLER SMALL DRILLING MACHINES 2.1 Shaded area indicates change Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines
Amphenol. Circular. Connectors C 16-1 / C Circular Connectors. Amphenol-Tuchel Electronics
Amphenol C 1-1 / C 1- Circular Circular Connectors Connectors Amphenol-Tuchel Electronics C 1-1 Overview No. of contacts + PE + PE Termination screw solder Wire gauge Rated insulation voltage Current carrying
The MUELLER method of making a main to service connection using the MUELLER E-5 Small Drilling Machine. The main is drilled out under pressure.
MUELLER SMALL DRILLING MACHINES 2.1 Rev. 9-09 MUELLER Co. manufactures several different small drilling machines for drilling holes from 7/16" to 2" in all types of pipe. Machines are available in hand
Amphenol. Advantage. R-Line R-146. Rectangular Attached Multi-Pin Industrial Cable Assemblies. Amphenol - Sine Systems
Amphenol Rectangular Attached Multi-Pin Industrial Assemblies Advantage R-146 R-Line Amphenol - Sine Systems Advantage * vs. the R-Line Molded Advantage Series * Patents pending Low Cost UL & CSA Listed
MAST ARMS & POLES. Ornamental Pole Top & Bases
Ornamental Pole Top & Bases Pelco s decorative pole top and bases make the traffic signal aesthetically pleasing to the eye. In addition to the standar 4-piece, Pelco also manufactures the bases with an
1/4" and 3.5 mm Phone Plugs
N Y S P r o d u c t G u i d e P l u g s 1/4" and 3.5 mm Phone Plugs NYS 204 NYS 208 NYS 224G NYS 225B Commercial 1/4" plugs and adapters All connectors acc. EIA RS-453 / IEC 60603-11 Short and long turned
Floor Boxes. Flush Service Floor Boxes
60W Series Floor Boxes 62W 61W For Wood Subfloors! Steel City 60W Series Floor Boxes provide single and multi-gang solutions for wood subfloor applications. NEW! Three-gang configuration for high-capacity,
Titan Series Awning Assembly and Installation Instructions
Titan Series Awning Assembly and Installation Instructions Be sure to use safety glasses when assembling and installing the awning. Some metal parts may have sharp edges. Use work gloves to handle them.
Piper GI Conduits. Heavy Gauge Welded GI Conduit, threaded
Piper GI Conduits Piper GI Conduits from Eurotube is a range of Conduits manufactured from high grade galvanized steel. The products are available in class 4 hot dipped galvanized, black enameled and class
Outline. Grounding Washer, Electrical Equipment Bond (WEEB) Acme Cable Clips Acme Conduit Entry (ACE) Questions
www.we-llc.com Outline Grounding Washer, Electrical Equipment Bond (WEEB) Acme Cable Clips Acme Conduit Entry (ACE) Questions Bonding & Grounding Grounding Terms Equipment Grounding: The National Electrical
FITTINGS & GAUGES 20,000 PSI
PRESSURE GAUGE Features 4" high visibility face with laminated safety glass dial cover Accurate within +/- 0.5% of full scale range Stainless steel case and internals Heavy-duty movement Glycerine-filled
Box Fill. We have learned how to fill or NOT overfill a conduit. We must also determine how to fill boxes and conduit bodies.
Box Fill We have learned how to fill or NOT overfill a conduit. We must also determine how to fill boxes and conduit bodies. Box Fill This falls into four categories: 1. Small box fill (NEC 314.16) 2.
Superstrut Stainless Steel Channels and Accessories
In this section... Superstrut Stainless Steel Channels and Accessories Superstrut Stainless Steel Channels and Accessories Channels...46 Channel Fittings and Hardware...47 49 Clamps and Hangers...50 52
FASTENERS. Black Machine Screws. Black Wood Screws
T-Nuts Washers Pop Rivets Wood Screws FASTENERS Fasteners Black Machine Screws 512-6007900 10-32 quadrex 3/4" length machine screw. Black Steel 512-6013900 10-32 quadrex 1-1/4" length machine screw. Black
SECTION BUILDING WIRE AND CABLE
SECTION 260519 PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Building wire and cable. 2. Wiring connectors and connections. B. RELATED SECTIONS 1. Section 26 05 53 Electrical Identification. 2. Section
Superstrut. Metal Framing. Beam Clamps. Design Loads. Finishes and Special Materials
Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the merican Standard Code for Pressure Piping. For more information, see page 57 for Engineering Data and
Clocking a TD-04 Turbo Compressor Housing. Appendix A : AWIC Silicone and Tubing Fitting
Clocking a TD-04 Turbo Compressor Housing Appendix A : AWIC Silicone and Tubing Fitting Revision A: 7-13-2015 Tools: Metric Sockets (10, 12, 14, 17mm) 5mm Hex Key Large Internal Snap Ring Pliers 3/8 Socket
Bulletin 800H Hazardous Location Push Buttons Product Overview/Specifications. Table of Contents See below.
Bulletin H Product verview/specifications Bulletin H/ Hazardous locations push buttons and stations Classes I, II & III Divisions & / in. - NPSM barrel Type & Explosion-proof operators Table of Contents
Holemaking Products & Accessories
Holemaking Products & Made of top-of-the-line materials for longer lasting performance, Klein's diverse line of drill bits and holemaking products and accessories provide accuracy and consistency to get
SB 50 Connectors - up to 120 amps
Connectors - up to 120 amps Based off the design pioneered by Anderson in 1953, APP s two pole SB connectors set the standard for DC power distribution and battery connections. connectors feature a one
Assembly Instructions
InTandem Table System November 20 InTandem Table System - Worksurface #4 x/" 4 wood screw power beam Tools Provided T-0 Extended Torx Driver T-25 Torx Driver Additional Tools Required Soft protective
Flush Round Single or Multi-Service Non-Metallic Concrete Floor Box Floor Boxes
Flush Round Single or Multi-Service Non-Metallic Concrete Floor ox Flush Round Single or Multi-Service Non-Metallic Concrete Floor ox Dimensions Inches (mm) D C PF1 Min. Depth of Pour 3.00" (76.2) Capacity
Bracket guide. LK Pipe Pole. LK Radiator fixture Uni
Bracket guide LK Radiator fixture Uni LK Radiator fixture Uni c/c 40 (Article no. 481 43 92) LK Radiator fixture Uni c/c 50 (Article no. 481 44 03) LK Pipe Pole (Article no. 481 43 91, 481 43 90) Used
St. Monica Food Pantry Low Voltage (600V and less) Conductors and Cables sys-tek No
St. Monica Food Pantry 26 0519-1 ELECTRICAL WORK DIVISION 26 SECTION 260519 LOW VOLTAGE (600V AND LESS) PART 1. GENERAL 1.1 WIRES (SINGLE CONDUCTOR) AND CABLES (MULTI-CONDUCTOR ASSEMBLIES) USED FOR THE
OWNER S MANUAL #DC2V3 #DC2V3CF 1-1/2 HP, 1500 CFM DUST COLLECTOR. VERSION 1 -w/ 6 INLET PORT. Model #DC2V Global Rd.
OWNER S MANUAL #DC2V3 #DC2V3CF 1-1/2 HP, 1500 CFM DUST COLLECTOR VERSION 1 -w/ 6 INLET PORT Model: #DC2V3CF 9900 Global Rd. Philadelphia, PA 19115 Model #DC2V3 Thank you for purchasing one of PSI s growing
Wisconsin Contractors Institute Continuing Education
IMPORTANT NOTE: You should have received an email from us with a link and password to take your final exam online. Please check your email for this link. Be sure to check your spam folder as well. If you
SECTION COMMON WORK RESULTS FOR HVAC
SECTION 23 05 00 COMMON WORK RESULTS FOR HVAC PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Ball Valve. 2. Hangers and Supports. 3. Identification Tags and Sleeves. 1.2 INCLUDED SECTIONS A. Section
CONTINUING EDUC ATION
3 CONTINUING EDUC ATION FOR WISCONSIN ELECTRICIANS 2017 NEC Article 250 2 Hours WISCONSIN CONTRACTORS INSTITUTE N16 W23217 Stone Ridge Drive Suite 290 Waukesha, WI 53188 262-409-4282 www.wcitraining.com
Setting Standards Connectors M 16
Setting Standards Connectors M 16 inclusive 15 Product Overview 16 Housings page 18 Inserts page 22 Accessories page 29 Technical Data M 16 Control Signal Connectors Mechanical Data Housing Materials and
Spiderbeam Balun Construction Guide
BALUN CONSTRUCTION GUIDE Ver. 1.0 1 The components of the Balun Kit are in a plastic bag. Most of the components are inside the plastic case of the balun. The aluminum U-profile and the RG-142 Teflon Coax
Holemaking. FEATURED Products. Slug-Splitter SC (Self-Centering) Knockout Punches NEW. Bi-Metal Hole Saws with Stops. NEW Quick Connect Extensions
Year after year, Greenlee delivers holemaking products that are second-to-none in the industry. And today, we offer the most complete line of holemaking solutions for getting through steel, stainless steel,
Cat. No. A1200 A1200-S A1200-KO. Finishes & Materials. E142-1/4x100EG 1/4 x 1 A100-5/16EGC A100-3/8EGC. Standard Finish: Electrogalvanized
Superstrut Support Systems 1-5/8 in. x 1-5/8 in. Channel and Hardware Superstrut 1-5/8 in. x 1-5/8 in. - 12 Gauge Channel Type A Solid Base Punched Description Solid base -P Punched -HS Half slots Half
Leveling Feet, Base Plates and Casters
Leveling Feet, Base Plates and Casters 77 Leveling Foot 1 1 Fastening to profile end Fastening in T-slot of profile For leveling tables and light equipment. Ratchet-type height adjustment requires no tools.
PF/PFQ. High Amperage plug and receptacle. Main Advantages
High Amperage plug and receptacle Main Advantages u u u Durable in harsh environments Safety features provide maximum protection Easy plug insertion and removal Watch the PF video and other product videos
Tuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced
AGUB Instrument and Meter Enclosures Explosionproof, Dust-Ignitionproof Furnished with aluminum body and solid or window cover.
AGUB Instrument and Meter Enclosures Furnished with aluminum body and solid or window cover. Class I, Division 1 and, Groups B, C, D Application To pull or splice wires and/or to mount and enclose electrical
Safety switches with slotted hole lever
Safety switches with slotted hole lever Selection diagram C1 C C C4 C5 Straight slotted hole lever Slotted hole lever at the left Slotted hole lever at the right (without bend) Slotted hole lever at the
sealed mini usb connectors
QUICK CONNECT CABLE END MATES WITH PANEL MOUNT PANEL MOUNT MATES WITH CABLE END REAR VIEW - PC TAIL REAR VIEW - FEED-THRU TERMINATION REAR VIEW - SOLDER HOLES SPECIFICATIONS Mechanical Specifications Life:
Lowlighter KLV Volt Die-Cast Brass, MR16 Halogen revision 2/25/14 kl_klv275_spec.pdf. Ravenna TM. Specifications. Approvals: Type: Job:
Catalog number: and Finish Options: See page 2 : See pages 3-5ˇ Approvals: Date: Page: 1 of 5 Specifications Lamp Housing: Die-cast brass with die-cast cover, stainless steel fasteners and stainless steel
Stud Wall Pages
Pages 125-144 125 Box Mounting Bracket For Electric Box Easily attaches 4" and 411 /16" outlet boxes to metal stud (HS3 switch boxes). Support leg reduces movement of box in wall. Can be attached to metal
Number Wheeler P/N Description Set Rex P/N Notes Base 1 J Support, Right 1 J Support, Left 1 J Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
Holemaking. Contents MADE FOR THE TRADE!
Year after year, Greenlee delivers holemaking products that are second-to-none in the industry. And today, we offer the most complete line of holemaking solutions for getting through steel, stainless steel,
SIGN MOUNTED BEACON SIG-027-A SINGLE SIGN MOUNTED FLASHING BEACON INSTALLED ON ONE WOOD POST DETAIL "A-1"
1 1/2" x 60" Galvanized (thread both ends) Top Bolt See Detail "A-1" and Slotted Channel Parallel Conduit Clamp Warning Sign 3 Equal Bolt Spacings (3 places at 12" min. spacing) (1) 3/8"x 7" min. (4"x
#4 Phillips Driver Bit 1/8, 4mm, 5.5mm & 8mm (5/16 ) Allen Wrench. Safety Glasses
ATLANTIS RAIL Contact Information: Atlantis Rail Systems 70 Armstrong Road 3900 Civic Center Drive Plymouth, MA 02360 North Las Vegas, NV 89030 (800) 541-6829 or (508) 732-9191 (508) 732-9798 www.atlantisrail.com
Project: Type: Qty: QH2L. Series Optics Mounting Light Engine CCT Finish Voltage Option. Options QH2L 27 3 /8" 23 3 /16" 3 1 /2" O.D. Pole.
Series Optics Mounting Light Engine CCT Finish Voltage QHL Quadro H LED R R R3 R4 R5 Type I Type II Type III Type IV Type V Project: Type: Qty: QHL _ Series Optics Mounting Light Engine CCT Finish Voltage
Adhesive Air Terminal Bases. Universal Surface Bases. Offset Parapet Air Terminal Bases. Section 3.2. Air Terminals & Air Terminal Bases
equipment catalog 3-5 Bases Adhesive Bases Used for mounting on membrane or built-up roofs. Mounted with adhesive or plastic roofing cement. The cast base has a mechanical conductor connector. BS-C-3/8ID-ADH-AT
High-impact resistant thermoplastic construction
Residential Grade Devices Receptacles TradeMaster Receptacles Tamper-Resistant Receptacles High-impact resistant thermoplastic construction Extra-long strap, Quickloop wire looping aid Long-term blade
Tuf-Lite III Fans 5000K Series Hub
Tuf-Lite III Fans 5000K Series Hub INSTALLATION MANUAL Hudson Tuf-Lite III fan blades Adjustable Pitch Fan Assembly 20 thru 30 Diameter Hudson Tuf-Lite III fan blades are of single piece fiberglass reinforced