Profile Selection Guide

Transcription

1 PRICE $ COLORADO EDITION Striving to provide quality products, outstanding service, innovative ideas, competitive prices and superior value.

2 Table of Contents 3 Casings 8 Baseboards 13 Crowns 14 Pacific Coast Hemlock 15 Pacific Coast Hemlock Mouldings 17 Pacific Coast Hemlock 20 Panel Moulds 20 Chair Rail 21 Corners & Squares 21 Quarter Rounds & Shoes 21 Quarter, Half & Full Rounds 22 Bricks & Lattice 22 Door Stops 23 Hand & Wall Rails 24 Misc. Profiles 26 Accessories 27 S4S Boards 27 Exterior Frames. Kerf 27 Interior Jambs. Flat 28 Glossary of Terms 29 Ultralite Supercoat Mouldings 30 The Sauder Group of Companies Your Best Source for Mouldings, ARCHITRAVE FLUTED MOULDING INSIDE CORNER MANTEL BUILD UP CHAIR RAIL PANEL MOULD BUNDLE COUNT PROFILE 908 BDL 9/16 x 3-1/4 Ultralite 7 PROFILE SIZES PROFILE SPECIES PLINTH BLOCK 1 Quality Service Selection

3 S4S Boards & Jambs CROWN BUILD UP OUTSIDE CORNER MOULDED CASING FLUTED CASING CASING BUILD-UP DENTIL CROWN ROSETTE CHAIR RAIL WAINSCOT CAP HANDRAIL LARGE FLUTED MOULDING SHADOW BOX BASE CAP S4S WAINSCOT PANELLING BASE SHOE Note: this illustration is representative only and is an aid in demonstrating some of the many moulding applications possible MOULDED BASEBOARD 2

4 Casings Casings define the overall character of a room and are often the most visible part of the trim. Casings are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. 322 BDL 5/8 x 2-1/2 FJ Raw 12 5/8 x 2-1/2 Hemlock BDL 9/16 x 2-5/8 Ultralite BDL 11/16 x 3 Knotty Alder 12 5/8 x 2-15/16 FJ Raw 12 5/8 x 2-15/16 Hemlock 6 9/16 x 2-15/16 Primed MDF BDL 9/16 x 2-1/4 FJ Raw BDL 11/16 x 2-1/4 Ultralite BDL 11/16 x 3-1/4 Ultralite BDL 9/16 x 2-1/4 FJ Raw 12 5/8 x 2-1/4 Hemlock 12 3

5 Casings Casings define the overall character of a room and are often the most visible part of the trim. Casings are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. 324 BDL 1 x 2-1/2 Ultralite BDL 1 x 3-1/2 Ultralite BDL 23/32 x 3-1/2 Ultralite BDL 5/8 x 2-1/4 Ultralite BDL 5/8 x 2-7/16 FJ Raw 12 9/16 x 2-1/2 Hemlock BDL 5/8 x 3-1/4 Ultralite BDL 11/16 x 3-1/4 FJ Raw 6 11/16 x 3-1/4 Hemlock 10 3/4 x 3 Ultralite 6 4

6 Casings Casings define the overall character of a room and are often the most visible part of the trim. Casings are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. 356 BDL 5/8 x 2-1/4 Solid Pine 12 5/8 x 2-1/4 FJ Raw 12 9/16 x 2-1/4 Primed MDF 6 5/8 x 2-1/4 Hemlock 10 7/16 x 2-1/16 Red Oak 10 7/16 x 2-1/8 Veneer 10 9/16 x 2-1/4 Ultralite BDL 5/8 x 3-7/16 Solid Pine 10 5/8 x 3-7/16 FJ Raw 12 9/16 x 3-1/4 Primed MDF 6 5/8 x 3-1/4 Hemlock BDL 5/8 x 2-1/4 Solid Pine 12 5/8 x 2-1/4 FJ Raw 12 1/2 x 2-3/16 Red Oak 10 9/16 x 2-1/4 Primed MDF 6 5/8 x 2-1/4 Hemlock 10 11/16 x 2-1/4 Knotty Alder 12 9/16 x 2-3/16 Veneer BDL 11/16 x 3-1/4 FJ Raw BDL 5/8 x 2-1/4 FJ Raw 12 5/8 x 2-1/4 Hemlock 10 5/8 x 2-1/4 Solid Pine BDL 5/8 x 2-1/2 FJ Raw 12 5/8 x 2-1/2 Hemlock 10 11/16 x 2-1/2 Knotty Alder 12

7 Casings Casings define the overall character of a room and are often the most visible part of the trim. Casings are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. 433 BDL 1/2 x 3-1/8 FJ Raw 12 7/16 x 3-1/4 Hemlock BDL 1/2 x 2-1/2 Ultralite BDL 5/8 x 2-1/2 Ultralite BDL 1/2 x 3-1/4 Ultralite BDL 1/2 x 2-3/16 FJ Raw 12 5/8 x 2-1/4 Hemlock BDL 11/16 x 2-1/4 FJ Raw 12 11/16 x 2-1/4 Solid Pine 12 6

8 Casings Casings define the overall character of a room and are often the most visible part of the trim. Casings are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. 907 BDL 9/16 x 2-1/4 Ultralite BDL 9/16 x 3-1/4 Ultralite BDL 9/16 x 3-1/4 Primed MDF 6 522C BDL 9/16 x 3-7/16 Hemlock BDL 3/4 x 3-1/2 Ultralite BDL 11/16 x 3-1/4 Knotty Alder 12

9 Baseboards Baseboards run along the wall at the floor. Baseboards should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 623 BDL 9/16 x 3-1/4 Solid Pine 10 9/16 x 3-1/4 FJ Raw 10 3/8 x 3-1/4 Red Oak 10 1/2 x 3-1/4 Primed MDF 6 1/2 x 3-1/4 Hemlock 10 1/2 x 3-1/4 Ultralite 10 5/8 x 3-1/4 Knotty Alder 10 1/2 x 3-1/4 Oak Veneer BDL 9/16 x 4-1/4 Solid Pine 6 9/16 x 4-1/4 FJ Raw 6 1/2 x 4-1/4 Hemlock BDL 9/16 x 5-1/4 FJ Raw 6 1/2 x 5-1/4 Hemlock 10 1/2 x 5-1/4 Primed MDF 6 9/16 x 5-1/4 Solid Pine BDL 1/2 x 2-1/4 Ultralite BDL 1/2 x 2-1/2 Solid Pine 12 1/2 x 2-1/2 FJ Raw 12 9/16 x 2-11/16 Red Oak 10 1/2 x 2-1/2 Primed MDF 6 1/2 x 2-7/16 Hemlock 10 8

10 Baseboards Baseboards run along the wall at the floor. Baseboards should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 217 BDL 19/32 x 4-1/2 Ultralite BDL 1/2 x 3-1/4 FJ Raw 6 1/2 x 3-1/4 Hemlock BDL 5/8 x 4-7/16 Solid Pine 6 5/8 x 4-7/16 FJ Raw 6 5/8 x 4-7/16 Hemlock BDL 9/16 x 3-1/4 Solid Pine 12 9/16 x 3-1/4 FJ Raw BDL 1/2 x 2-1/4 Solid Pine 12 1/2 x 2-1/4 FJ Raw BDL 19/32 x 5-1/2 Ultralite BDL 1/2 x 4-1/4 Ultralite 6

11 Baseboards Baseboards run along the wall at the floor. Baseboards should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 744 BDL 9/16 x 3-3/16 FJ Raw 6 9/16 x 3-1/4 Hemlock BDL 9/16 x 5-3/16 FJ Raw 6 9/16 x 5-3/16 Hemlock BDL 9/16 x 3-1/4 FJ Raw 6 1/2 x 3-1/4 Hemlock BDL 9/16 x 3-1/4 FJ Raw 6 9/16 x 3-1/4 Hemlock BDL 9/16 x 4-1/2 FJ Raw 6 522B BDL 5/8 x 4-1/2 Hemlock BDL 5/8 x 4-1/2 Knotty Alder 12 9/16 x 4-1/4 FJ Raw 12 9/16 x 4-1/8 Hemlock 12 9/16 x 4-1/2 Primed MDF 6 10

12 Baseboards Baseboards run along the wall at the floor. Baseboards should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. 412 BDL 5/8 x 4-1/4 Ultralite BDL 19/32 x 5-1/4 Ultralite BDL 9/16 x 3-3/8 Ultralite BDL 5/8 x 6-1/2 Ultralite BDL 1/2 x 3-3/16 FJ Raw 6 1/2 x 3-1/4 Hemlock 10 5/8 x 3-1/4 Knotty Alder BDL 7/16 x 2-7/16 FJ Raw 6 1/2 x 2-1/2 Hemlock BDL 1/2 x 4-5/16 FJ Raw 6

13 Baseboards Baseboards run along the wall at the floor. Baseboards should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing BDL 3/8 x 3-7/8 Ultralite BDL 19/32 x 7-1/4 Ultralite BDL 3/8 x 5-1/4 Hemlock 6 205T BDL 1/2 x 3-7/8 Ultralite BDL 5/8 x 5 Ultralite 3 12

14 Crowns Crowns run along the wall at the ceiling. Crowns come in a wide range of sizes and patterns. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to most rooms. 47D BDL 19/32 x 4-1/4 Ultralite 8 48 BDL 1/2 x 4-3/16 FJ Raw BDL 3/4 x 4-1/2 Ultralite BDL 13/16 x 4-3/4 Knotty Alder 4 40 BDL 11/16 x 4-1/4 Ultralite 2 13

15

16 PacificCoast Hemlock M O U L D I N G S Stain or paint grade mouldings of high quality manufactured by Sauder Wood Products from kiln dried Pacific Coast Hemlock Pacific Coast Hemlock has a fine uniform texture with a subtle grain pattern. It can be easily worked with hand or power tools to a fine tolerance and sanded to a smooth finish that hardens with age. The color is generally consistent, shading from white to pale tan with little difference between heartwood and sapwood. The wood takes and holds nails, screws and other mechanical fasteners with a minimum of splitting. Pacific Coast Hemlock glues well with a variety of adhesives under a wide range of conditions. Free of pitch and resin, Pacific Coast Hemlock is suitable for all types and colors of stain, paint and varnish. There is no risk of bleeding through the finished surface. Pacific Coast Hemlock Mouldings... an excellent product, at a surprising value!

17 PacificCoast Hemlock Pacific Coast Hemlock is a fine grained wood native only to the managed forests of British Columbia, Canada, and Washington state. Controlled harvests, natural regeneration and planting three trees for each one harvested, assures forests forever. This versatile wood is both attractive and hard-wearing; it matches many hardwoods feature for feature and quality for quality. Pacific Coast Hemlock has achieved an international reputation for excellence. Hemlock COST EFFECTIVE Pacific Coast Hemlock (PCH) moulding prices are now more stable than any other available species. PCH mouldings do not follow the rollercoaster market as do Pine and White Fir mouldings. FINE EVEN GRAIN No brashy loud appearance common to White Fir. HEMLOCK has a rich appearance more like Oak or Birch than a softwood. HARDEST OF SOFTWOODS Significantly more dense than White Fir (about 20%), HEMLOCK is more durable than any other softwoods. It will not dent as easily and machines to a much smoother finish. DENSE UNIFORM TEXTURE Unlike White Fir which is more fibrous and open grained, HEMLOCK is significantly better suited for finishing. GROWS IN COASTAL BRITISH COLUMBIA AND WASHINGTON British Columbia is committed to sustainable forestry practices, thereby ensuring the long term availability of hemlock. The unique relationship that Sauder enjoys with the major hemlock manufacturers guarantees an ongoing supply of consistent high grade hemlock lumber for moulding production. CONSISTENT COLOR* PCH s light uniform color and tight growth rings offer an eyepleasing appearance superior to white fir or pine. This consistency allows you to use one species to achieve a full range of color and finishes, by staining beautifully from the lightest tints to the darkest hues. FINISHES* HONEY OAK NATURAL DARK WALNUT TEAK GOLDEN OAK CHERRY *Due to the variances of the printing process, the finishes shown may vary slightly from finished product.

18

19 Crowns Crowns run along the wall at the ceiling. Crowns come in a wide range of sizes and patterns. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to most rooms. 49 BDL 9/16 x 3-9/16 Solid Pine 6 9/16 x 3-9/16 Hemlock 6 9/16 x 3-9/16 FJ Raw 6 43 BDL 1 x 6-15/16 Ultralite BDL 23/32 x 5-1/4 Ultralite 6 52 BDL 9/16 x 2-3/4 Solid Pine 2 18

20 Crowns Crowns run along the wall at the ceiling. Crowns come in a wide range of sizes and patterns. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to most rooms. 51 BDL 9/16 x 3-1/4 Ultralite 6 11/16 x 3-1/4 Red Oak 6 41 BDL 1-3/16 x 6-5/16 Ultralite 2 47 BDL 9/16 x 4-9/16 Solid Pine 6 9/16 x 4-9/16 FJ Raw 6 5/8 x 4-1/4 Ultralite 4 5/8 x 4-5/8 Primed MDF 6 72 BDL 9/16 x 2-3/16 Solid Pine BDL 9/16 x 1-5/8 Solid Pine BDL 9/16 x 1-3/4 Solid Pine 20

21 Panel Moulds Panel moulds are used to frame wall paneling and add a decorative element to this type of application. Panel moulds also add accent to walls. 228 BDL 1/2 x 2 Solid Pine BDL 9/16 x 1-1/8 Solid Pine 30 PM6 BDL 1-1/16 x 1-13/16 Solid Pine 10 PM1 BDL 5/8 x 1-1/4 Solid Pine 10 Chair Rail Chair rails have a decorative and practical function. Applied to a wall anywhere from 24 to 48 inches from the floor, they are a beautiful accent to the room, while also protecting the wall from scuffs and dents from the backs of chairs. 390 BDL 5/8 x 2-7/16 Hemlock 12 9/16 x 2-9/16 Primed MDF 6 5/8 x 2-5/8 FJ Raw 12 5/8 x 2-5/8 Solid Pine 12 3/4 x 2-7/16 Ultralite Architrave BDL 1-3/16 x 3-3/4 Ultralite BDL 5/8 x 2-7/16 Solid Pine BDL 3/4 x 3 Ultralite 6 20

22 Corners & Squares CORNERS: This profile is used to protect outside edges from damage and abrasion. Outside corners come in a variety of sizes and detail. SQUARES: Another group of versatile profiles, squares and parting beads are used in a wide range of applications. Among the many uses of these profiles are to fill gaps, transition heights, etc. This profile is also used in numerous craft projects. 206 BDL 3/4 x 3/4 Red Oak 30 11/16 x 11/16 Solid Pine BDL 3/4 x 3/4 Solid Pine BDL 1-5/16 x 1-5/16 Solid Pine BDL 1-1/16 x 1-1/16 Red Oak /16 x 1-1/16 Hemlock /16 x 1-1/16 Solid Pine 20 Quarter Rounds & Shoes Quarter rounds come in several sizes and serve a variety of functions but are most often used to finish inside corners. 126 BDL 1/2 x 3/4 Solid Pine 30 7/16 x 3/4 Red Oak 30 7/16 x 11/16 Hemlock BDL 1/2 x 1/2 Solid Pine BDL 11/16 x 11/16 Solid Pine 20 3/4 x 3/4 Red Oak BDL 1/4 x 1/4 Solid Pine BDL 1/2 x 1 Solid Pine BDL 3/8 x 3/4 Solid Pine 30 21

23 Bricks & Lattice BRICKMOULDS: Brickmoulds are used as exterior casing around doors. 2 is the most common size however, it is available in 1 1/2 and 2 1/4 inch sizes. LATTICE: Lattice strips are thin pieces of flat moulding that come in several widths and have a multitude of uses. Among the most common uses are to hide seams, edge trim, etc. 265 BDL 1/4 x 1-11/16 Solid Pine BDL 1/4 x 1-3/8 Solid Pine BDL 1/4 x 1-1/8 Solid Pine BDL 1-1/4 x 2 Solid Pine 6 1-1/4 x 2 Primed FJ 8 1-1/4 x 2 Knotty Alder 4 1-1/4 x 2 Hemlock 4 1-1/4 x 2 FJ Raw 8 Door Stops Stops are used in door and window applications to stop the door or window BDL 3/8 x 1-1/4 FJ Raw BDL 1/2 x 1-1/4 Knotty Alder BDL 3/8 x 1-3/16 FJ Raw BDL 5/16 x 1-3/8 Solid Pine 30 3/8 x 1-3/8 Red Oak 20 3/8 x 1-3/8 Hemlock 20 1/2 x 1-1/4 Knotty Alder 20 5/16 x 1-3/8 FJ Raw 30 22

24 Hand & Wall Rails Handrails provide safety and support while going up or down stairs. 231 BDL 1-7/16 x 1-5/8 Hemlock BDL 2-1/4 x 2-3/8 Hemlock BDL 1-5/16 x 1-5/16 Hemlock BDL 1-7/16 x 3-1/2 Hemlock 1 206NG BDL 1-7/16 x 5-3/8 Hemlock BDL 1-7/16 x 5-3/8 Hemlock 1 23

25 Misc. Profiles BDL 1-1/4 x 2 x 7 Solid Pine BDL 1-1/4 x 2 x 8 Solid Pine BDL 1-1/4 x 2 x 7 Solid Pine BDL 1/2 x 3/4 Solid Pine KNEWLS BDL 3-1/4 x 3-1/4 x 48 Hemlock 1 60 KNEWLS BDL 3-1/4 x 3-1/4 x 60 Hemlock 1 48 Baluster - Eased E4E BDL 1-7/16 x 1-7/16 x 48 Hemlock 1 34 Baluster - Square & E4E BDL 1-1/4 x 1-1/4 x 34 Hemlock 1 36 Baluster - Square & E4E BDL 1-1/4 x 1-1/4 x 36 Hemlock 1 41 Baluster - Square BDL 1-1/4 x 1-1/4 x 41 Hemlock 1 48 Baluster - Square BDL 1-1/4 x 1-1/4 x 48 Hemlock 1 24

26 Misc. Profiles 148 BDL 3/8 x 3/8 Solid Pine BDL 3/16 x 11/16 Solid Pine 30 1/4 x 3/4 Red Oak 30 1/4 x 3/4 Hemlock BDL 3/8 x 3/4 Solid Pine BDL 3/4 x 3/4 Hemlock Cove BDL 11/16 x 11/16 Solid Pine 20 3/4 x 3/4 Red Oak Cap DM7 BDL 11/16 x 1-5/16 Solid Pine 20 Cap PM5 BDL 5/8 x 1-1/16 Solid Pine 20 Basecap 163 BDL 5/8 x 1-5/16 Solid Pine 20 5/8 x 1-5/16 Hemlock 16

27 Accessories Inside Base Corner BDL 3/4 x 3/4 x 7-1/4 Hemlock 1 3/4 x 3/4 x 7-1/4 Solid Pine 1 Outside Corner BDL 1-5/8 x 1-5/8 x 7-1/4 Hemlock 1 1-5/8 x 1-5/8 x 7-1/4 Solid Pine 1 Rosette Block BDL 3/4 x 3-1/2 x 3-1/2 Solid Pine 1 Rosette Block BDL 3/4 x 2-1/2 x 2-1/2 Solid Pine 1 Rosette Block BDL 3/4 x 3-1/2 x 3-1/2 Primed Radius Corner BDL 2-1/2 Height Primed FJ 1 2-1/2 Height Solid Pine Radius Corner BDL 3-1/4 Height Primed FJ 1 3-1/4 Height Solid Pine 1 Plinth Block BDL 3/4 x 3-1/2 x 6-1/2 Universal Primed 1 3/4 x 3-1/2 x 6 Solid Pine 1 3/4 x 2-1/2 x 4-1/2 Solid Pine Radius Corner BDL 2-1/4 Height Primed FJ 1 2-1/4 Height Solid Pine Radius Corner BDL 2-1/4 Height Primed FJ 1 2-1/4 Height Solid Pine 1 26

28 S4S Boards Finish boards come in S4S (surfaced four sides) and are used for a multitude of purposes including shelving, window liner, bases, casing, etc. 1x2 1x3 1x4 1x6 1x8 1x10 1x12 1x16 HEMLOCK VG X X X X X X X RED OAK X X X X X X X RAW MDF X X X X X X X X PRIMED MDF X X X X X X X PRIMED MDF E2E X X X X X KNOTTY ALDER X X X X X CHERRY LUMBER X X X X POPLAR X X X X SOLID PINE X X ULTRALITE X X X X X X X Hemlock Red Oak Raw MDF Primed MDF Knotty Alder Cherry Lumber Poplar Solid Pine FJ Raw Ultralite FJ RAW X X X X X Exterior Frames - Kerf Also available in 8 Feet. 4-9/16 Leg 4-13/16 Leg 5-1/4 Leg 6-9/16 Leg 7-1/4 Leg FJ RAW X X X X X SOLID PINE X X PRIMED FJ X X KNOTTY ALDER X X HEMLOCK X X Interior Jambs - Flat Interior Jambs all dadoed at 81 1/2 below dado and beveled. Also available in 8 Feet. 4-9/16 Leg 4-13/16 Leg 5-1/4 Leg 6-9/16 Leg 7-1/4 Leg FJ RAW X X X X KNOTTY ALDER X X HEMLOCK X OAK X X X BIRCH X X PINE X PRIMED MDF X X JAMB SGL RABBET KERF 27

29 Glossary of Terms BASEBOARDS: Baseboards run along the wall at the floor. Baseboards should be chosen to work in harmony with your casings to finish and tie the room together. Baseboards are usually thinner than the casing. BASE SHOES: Base shoes are primarily used to trim flooring materials and are often used in combination with a traditional baseboard to conceal variations between the flooring and the base. However, this versatile profile works great to solve numerous trimming needs. BEADED CEILING: A popular profile used often as wainscot paneling. Combined with a chair rail or cap mould and a baseboard, beaded ceiling makes a distinctive wainscot package. BRICKMOULDS: Brickmoulds are used as exterior casing around doors. 2 is the most common size however, it is available in 1-1 /2 and 2-1 /4 inch sizes. BUILD-UPS: Combining two or more moulding profiles to create a new or custom look. Also called stacking, build-ups make it easy to create the look of custom made trimwork without the high cost. BULLNOSE: A term used to describe the eased edges of trim and stops. A single bull nose stop would have one eased edge and a square edge back. A double bull nose stop would have two eased edges. CASING: Casings define the overall character of a room and are often the most visible part of the trim. Casings are used primarily to cover the gap between drywall and the door or window frame. Casings are generally thicker than the base mouldings. CHAIR RAILS: Chair rails have a decorative and practical function. Applied to a wall anywhere from 24 to 48 inches from the floor, they are a beautiful accent to the room, while also protecting the wall from scuffs and dents from the backs of chairs. CORNER MOULDING: This profile is used to protect outside edges from damage and abrasion. Outside corners come in a variety of sizes and detail. COVE MOULDING: This profile has a wide range of uses, it is most commonly used to soften the transition on inside corners. CROWNS: Crowns usually run along the wall at the ceiling. Crowns come in a wide range of sizes and patterns. Crowns soften the transition from wall to ceiling while adding a distinctive look and charm to most rooms. DENTIL: A moulding pattern with a series of closely spaced rectangular blocks and spaces. Used especially in classic architecture. FINISH BOARDS: Finish boards come in either S4S (surfaced four sides) or S3S (surfaced three sides) and are used for a multitude of purposes including shelving, window liner, bases, casing, etc. FULL ROUNDS: Full rounds are used for numerous purposes and projects. Some of the more common uses are closet poles, curtain rods and towel rods. HALF ROUNDS: A cross section of this profile looks like a half circle and is used primarily as decorative trim. It works well as a trim piece for wall paper or to add a decorative pattern to flat panels. This profile can also be used to put a rounded edge on 3 /4 shelving. HANDRAILS: Handrails provide safety and support while going up or down stairs. LATTICE: Lattice strips are thin pieces of flat moulding that come in several widths and are used for a multitude of uses. Among the most common uses are to hide seams, edge trim, etc. PANEL MOULDS: Panel moulds are used to frame wall paneling and add a decorative element to this type of application. Panel moulds also add accent to walls. QUARTER ROUNDS: Quarter rounds come in several sizes and serve a variety of functions but are most often used to finish inside corners. RETURN: Term used to indicate the method of carrying a mouldings detail from the front of the moulding back to the wall. Generally a 45 degree cut is made to the front of the long moulding and an opposite 45 is cut on a small piece to carry the detail to the wall. SCREEN MOULD: A very versatile profile; screen mould fits a wide variety of needs and uses. Traditionally used to hold mesh screening into wood screens, it also works well as edge trim on 3 /4 shelving or wood trim for wall paper etc. SQUARES AND PARTING BEADS: Another group of versatile profiles, squares and parting beads are used in a wide range of applications. Among the many uses of these profiles are to fill gaps, transition heights, etc. This profile is also used in numerous craft projects. STOPS: Stops are used in door and window applications to stop the door or window. Stops come in a wide range of widths in single bullnose (one eased edge) or double bullnose (two eased edges). WAINSCOTING: Trimwork installed in the area below a chair rail. Numerous options are available including raised panel, shadow box and beaded ceiling. Combined with a chair rail and baseboard wainscoting creates a dramatic look to any room. WINDOW CASING: Trim that borders the edges of a window frame. Casings define the overall character of the room and are often the most visible part of the trim. WINDOW STOOL: The surface installed below the sash of a window. Also called window sill. Trim installed under window stool creates a distinctive look and adds a decorators touch. Storage, Handling and Preparation of all Mouldings and S4S Boards Until the time this product has been correctly final coated (after painting or staining) and installed, in conformance with all paint manufacturer recommendations as well as the highest and best building practices, respectively, for intended use, it must be continuously and effectively protected from exposure to direct sunlight, ground contact and the elements. It should be stored only in a dry, clean location and transported only if fully protected from water. As a final preparation before installation: (a) indoors, the product must be acclimated to the environment by storing it in the installation space for at least 3 days (with both faces exposed to the air in that space); (b) outdoors, every surface lacking both primer and final coat must be effectively coated to achieve protection recommended by the paint manufacturer respecting intended use. 28

30 ULTRALITE S U P E R C O A T The first to bring you Ultralite Supercoat Mouldings ULTRALITE S U P E R C O A T Light Weight Create Your Own Custom Look Superior Paintability Primer Fingerjoint Pine Ultralite Supercoat Ultralite Supercoat moulding and fingerjoint pine are very similar in weight and density MDF Ultralite Supercoat Over 30% lighter than standard MDF, Ultralite Supercoat installs with less effort The moulding at the top at the ceiling is: Moulding & Millwork #412 Baseboard The angled moulding is: Moulding & Millwork #47 Crown The moulding mounted on the wall is: Moulding & Millwork #412 Baseboard Superior two coat primed surface so smooth it could be installed as is No grain raise Less paint for total coverage Less Waste (100% useable) Manufactured product means total consistency from piece to piece No splits, knots, grain raise or fingerjoints No warping or twisting Available in standard builders lengths Superior Workability 5 The angled moulding is: Moulding & Millwork #47 Crown The moulding mounted on the wall is: Moulding & Millwork #8263 Baseboard Installs With Ease ULTRALITE SUPERCOAT Moulding Wall Ultralite Supercoat moulding has the handling and machining qualities of fingerjoint pine It copes and mitres with ease Does not chip or split cost Cost Effective ULTRALITE FINGERJOINT For the same application our Ultralite Supercoat moulding costs less than fingerjoint pine The architrave moulding at the top of the door is: Moulding & Millwork #5000 The door casing is: Moulding & Millwork #908 Supercoat nails like fingerjoint Supercoat will not split Supercoat will not volcano* (unlike standard MDF) Wall Moulding MDF * Volcanoing occurs when a nail or staple pushes the moulding material away from it. This causes puckering around the nail head that requires filling and sanding.

31 The Sauder Group of Companies Hardwoods reigns as one of North America s largest wholesale distributors of hardwood lumber, plywood and specialty sheet goods. Uniquely positioned to meet the needs of cabinet, furniture and millwork manufacturers, Hardwoods sources an impressive selection of quality product from around the world. Its highly trained workforce services customers from over 35 sales and warehousing facilities throughout North America. Moulding and Millwork is one of the largest suppliers of mouldings in North America. With their 27 plus locations they are able to satisfy regional product needs and provide superior local market service. Moulding and Millwork s vast global supply network includes Sauder s own manufacturing plants as well as leading vertically integrated moulding producers from around the world. Deep inventories of quality products in a wide selection of species, combined with a superb understanding of customer needs, yield near perfect fill rates. Sauder Mouldings is one of the world s largest manufacturers of moulding products, and is the world s largest manufacturer of Pacific Coast Hemlock mouldings. The company currently operates 9 mills throughout the USA and Canada producing high quality MDF, Hemlock, Oak, Poplar, Fir, Solid Pine, Knotty Pine, Pre-finished and Fingerjoint Pine mouldings, casings, S4S lumber, door jambs and frames. Using state of the art technology, the company s highly trained workforce meets the most demanding customer needs. Tru-Fit is the proud, exclusive Canadian distributor/partner of Masonite the world s largest door manufacturer. Tru-Fit s highly focused workforce services the market from 9 locations, boasting unparalleled pre-hanging, machining and glazing capabilities, vast inventories and unwavering customer service. Moulding & Millwork East 32nd Parkway Aurora, CO USA Phone Fax

32 IMAGINE THE POSSIBILITIES Moulding & Millwork Colorado - Products and Capabilities Wide selection and deep inventories of mouldings and boards Solid Pine & Knotty Alder Raw & Primed MDF Red Oak & Hemlock Ultralite MDF Cherry & Poplar Fingerjoint (Raw & Primed) Veneer Interior & Exterior Jambs Wide variety of custom mouldings and boards available in many species Truck load commodity quotes available in all product lines (Mill Direct) Regular deliveries available; daily, weekly, next day (depending on area) Moulding & Millwork is focused only on Mouldings, S4S Boards and Jambs DISTRIBUTED BY: MOULDING & MILLWORK, INC. - DENVER East 32nd Parkway, Aurora, CO Phone (303) Fax (303) PRINTED IN CANADA 09/03