SWT 100 Wide-Belt Sanding Machines
|
|
- Tyler Doyle
- 5 years ago
- Views:
Transcription
1 03/2014 EN For the Success of Original Technology A campaign of the VDMA Member of the HOMAG Group You may contact us WORLDWIDE Competent spare parts service Communication: Up-to-date information at all times: Any questions, new ideas, criticism & praise to: info@weeke.de Subject to technical modifi cations, misprints and errors. Pictures may show special equipment. SWT 100 Wide-Belt Sanding Machines /2015 WEEKE Bohrsysteme GmbH Division Sanding Technology Benzstrasse Herzebrock-Clarholz GERMANY Tel.: Fax: info@weeke.de
2 The world sands with BÜTFERING For over 60 years the BÜTFERING brand has stood for high performance wide-belt sanding machines and innovative surface finishing. These include special and multi purpose sanding machines for calibrating and intermediate sanding as well as lacquer finishing machines. Always focused on the machining of wood and wood based composite materials. World wide on site BÜTFERING is on the spot and active world wide. Whether you are looking for good advice, sales or fast on-site service, you will find competent partners in over 65 countries representing the BÜTFERING brand. Contents SWT The brand 04 The character 06 The series 09 The right pressure 10 The technical data 2 SWT 100 Wide-Belt Sanding Machines SWT 100 Wide-Belt Sanding Machines 3
3 The SWT 100 series The SWT 100 the easy way into the world of professional sanding. Either as single-head machine or equipped with up to three sanding heads the SWT 100 series executes all sanding tasks in a competent way. These include calibrating and fine sanding on solid wood and veneered panels also easy lacquer sanding. Everything for a working width of up to 1,100 mm with a sanding belt length of 1,900 mm. easy robust inexpensive Character Putting on the right pressure... according to requirements there are acp and eps sanding pads available on your choice Being flexible... up to three sanding heads available fi nish sanding in a single pass Being powerful kw drive motor performance per head Going up to speed... Poly V belt drives for effi cient torque transmission Being heavy... welded, warp resistant machine frame Being easy... easy machine operation thanks Touch Screen control Being of quality... robust, automatic feed belt control with tracking device Giving safety... over thickness protection for higher operation reliability 4 SWT 100 Wide-Belt Sanding Machines SWT 100 Wide-Belt Sanding Machines 5
4 The SWT 100 series SWT 114 L Ideal for the more varied market entry SWT 113 L Requirement for finish sanding: Multiple belt changes Max. one belt change Finish sanding in one cycle Available as option System Solid wood Veneer Lacquer Head: Combi head with profi les steel contact roller (160 mm diam) and a workpiece-controlled air-cushion sanding pad Suitable for sanding of solid wood components, frames, eg. MDF, Particleboard, and Plywood Working width 1100 mm Variable feed speed by frequency invertor Touchscreen operation with 125 programs Maintenance free DC braking system Independantly driven sanding heads Poly V-belt drives SWT 114 L SWT 114 C SWT 124 RL SWT 114 C The most flexible starter Head: SWT 124 RC Combi-head with profi led steel contact roller (160 mm diam) and an electronically controlled segmented pad with 35 mm segments Suitable for sanding of veneered parts in 1 or 2 passes with the segmented pad only Variable feed speed by frequency invertor Touchscreen operation with 125 programs Maintenance free DC braking system Independantly driven sanding heads SWT 134 RRL SWT 134 RRC eps - electronic pressure system acp - air cushion pad Suitable for calibration of panel-type workpieces Thickness tolerance compensation up to 2 mm Poly V-belt drives * SWT 113 L Ideal for new users SWT 124 RL Simple handling of solid wood Head: Combi head with profi led steel contact roller (160 m diam) and a workpiece-controlled air-cushion sanding pad Suitable for sanding of solid wood components, frames, eg. MDF, Particleboard, and Plywood Working width 950 mm Variable feed speed by frequency invertor Touchscreen operation with 125 programs Maintenance free DC braking system Calibration head with profi led steel contact roller (160 mm diam) Combi-head with profi led, rubberised 65 shore contact roller (160 mm diam) and a workpiece-controlled air-cushion sanding pad Variable feed speed by frequency invertor Touchscreen operation with 125 programs Maintenance free DC braking system Independantly driven sanding heads Independantly driven sanding heads Poly V-belt drives Suitable for sanding of solid wood components, frames, eg. MDF, Particleboard, and Plywood Poly V-belt drives * Available as option 6 SWT 100 Wide-Belt Sanding Machines SWT 100 Wide-Belt Sanding Machines 7
5 SWT 124 RC Twin-head flexibility for all applications For the right pressure at the right place at the right time Variable feed speed by frequency invertor Touchscreen operation with 125 programs Maintenance free DC braking system Independantly driven sanding heads Poly V-belt drives Calibration head with profi led contact roller (160 mm diam) Combi-head with profi led, rubberised contact roller 65 Shore (160 mm diam) and electronically controlled segmented pad with 35 mm segments Suitable for sanding veneered parts as well as for sanding solid wood Thickness tolerance compensation up to 2 mm Air cushion sanding pad Electronic pneumatic system Suitable for sanding of solid wood, and wood based materials in a single pass with a 2 grit sequence * Efficient and precise sanding... The acp system senses incoming work pieces and activates the rise and fall pad system to give an anti-dubbing facility at both leading and trailing edges of the part. Optimal pressure due to small seegment width of 35 mm The machine s electronics ensure the optimum sanding pressure on all areas of a workpiece, guaranteeing a perfect sanding result. SWT 134 RRL Finish sanding of solid wood in just one pass Calibration head with profi led steel contact roller (160 mm diam) Calibration head with profi led rubberised 85 shore contact roller (160 mm diam) Combi-head with profi led, rubberised 65 shore contact roller (160 mm diam) and a workpiece-controlled air-cushion sanding pad. Suitable for sanding of solid wood components, frames, eg. MDF, Particleboard, and Plywood. Suitable for sanding of solid wood and wood based materials in a single pass with a 2 grit sequence Variable feed speed by frequency invertor Touchscreen operation with 125 programs Maintenance free DC braking system Independantly driven sanding heads Poly V-belt drives SWT 134 RRC All application completed in just one pass Highlights Pneumatic pressure pad system for the right pressure over the entire working width Adjustable sanding pressure for consistent surface quality Optimal for processing solid wood Options for the SWT 100 series Highlights Electronically controlled segmented pad system for effi cient sanding pressure 35 mm segment width for perfect sanding results on all areas of the parts Automatic adjustment of the segments to the workpiece surface Thickness tolerance compensation up to 2 mm Calibration head with profi led steel contact roller (160 mm diam) Calibration head with profi led rubberised 85 shore contact roller (160 mm diam) Combi-head with profi led, rubberised contact roller 65 Shore (160 mm diam) and electronically controlled segmented pad with 35 mm segments Suitable for sanding of veneered parts as well as for sanding of solid wood Thickness tolerance compensation up to 2 mm Suitable for sanding of solid wood and wood based materials in a single pass with a 3 grit sequence Variable feed speed by frequency invertor Touchscreen operation with 125 programs Maintenance free DC braking system Independantly driven sanding heads Poly V-belt drives Cleaning brush Air-jet belt blower Variabe cutting speed (Lacquer sanding) * * Available as option 8 SWT 100 Wide-Belt Sanding Machines SWT 100 Wide-Belt Sanding Machines 9
6 The technical data Model 113 L 114 L 114 C 124 RL 124 RC 134 RRL 134 RRC Number of heads Working width mm/inch 950/ / / / / / /43 Focussing on the essential Abrasive belt width mm/inch 970/ / / / / / /44 Abrasive belt length mm/inch 1900/ / / / / / /75 Workpiece thickness min. - max. mm/inch 1/8-7 1/8-7 1,8 7 1,8 7 1,8 7 1,8-7 1,8-7 Air pressure bar / Compressed air usage max. l/min 6 / 20 6 / 20 6 / 20 6 / 40 6 / 40 6 / 60 6 / 60 Dust extraction approx. m3/h Length / Width / Height mm 1400 / 1650 / 1400 / 1800 / 1400 / 1800/ 1700 / 1800 / 1700 / 1800 / 1900 / 1800 / 1900 / 1800 / Total connected load kw Weight kg Height Length Width 10 SWT 100 Wide-Belt Sanding Machines SWT 100 Wide-Belt Sanding Machines 11
SWT 200 Wide-Belt Sanding Machines
SWT 200 Wide-Belt Sanding Machines The world sands with BÜTFERING BÜTFERING The Fascination of Sanding For over 60 years the BÜTFERING brand has stood for high performance wide-belt sanding machines and
More informationSWT 200 Wide-Belt Sanding Machines
SWT 200 Wide-Belt Sanding Machines 2016/2017 Discover the possibilities. The BÜTFERING SWT 200. For almost 70 years the BÜTFERING brand has stood for high performance wide-belt sanding machines and innovative
More informationSWT 700/900 Fascination Sanding
SWT 700/900 Fascination Sanding Optimat profiline powerline A B O U T B Ü T F E R I N G B Ü T F E R I N G S W T 7 0 0 / 9 0 0 Ideal range of performance SWT 700 SWT 900 Feed speed < 35m/min < 65m/min Working
More informationVertical CNC Processing Centers BHX 200 series
Vertical CNC Processing Centers BHX 200 series BHX 200 / 200/D compact, smart, vertical The flexible power pack on less than 10 m²: Space-saving due to vertical construction No setting times due to clamping
More informationSWT 300 / SWT 700 Wide-Belt Sanding Machines
SWT 300 / SWT 700 Wide-Belt Sanding Machines 02 HOMAG SWT 300 / SWT 700 Contents HOMAG SWT 300 / SWT 700 Contents 03 Hi-tech interior in attractive design. These things combined: YOUR SOLUTION For more
More informationCOMPACT CATEGORY WEBER LCS. Wide Belt Sanding Machine. WEBER KSN compact. Automatic Sanding Machine
COMPACT CATEGORY WEBER LCS Wide Belt Sanding Machine WEBER KSN compact Automatic Sanding Machine 3 1913 WEBER works according to a 100-year-old tradition and experience in building sanding machines 1955
More informationVertical CNC Processing Centers BHX 200 series
Vertical CNC Processing Centers BHX 200 series 2015/2016 BHX 200 Series compact, smart, vertical The flexible power pack on less than 10 m²: Space-saving due to vertical construction No setting times due
More informationABD 260 Optimat CNC-Drilling and Dowel Inserting Machine
D 260 Optimat CNC-Drilling and Dowel Inserting Machine Drilling and dowelling and always keeping a tight grip on everything Whether as individual machine or complementary product in connection with a CNC
More informationCNC Gantry-Processing Centers Vantage 100
CNC Gantry-Processing Centers Nest & More Vantage /// German Technology MATRIX MATRIX Configuration Standard: 12 HP (9 kw) HSK routing spindle Optional: 16 HP (12 kw) HSK routing spindle Tool changing
More informationWEBER KSN Automatic sanding machine
UNIVERSAL CATEGORY WEBER KSN Automatic sanding machine Wood, veneer, lacquer sanding and texturing in a new dimension. 3 1913 WEBER works according to a 100-year-old tradition and experience in building
More informationDocumentation. The Sanding Experts Widebelt-Sanding
Documentation The Sanding Experts Widebelt-Sanding Table of Contents 2 1 Company Locations 2 KÜNDIG Premium 2.1 Premium-1 2.2 Premium-2 2.3 Premium-3 3 KÜNDIG Brilliant 3.1 Brilliant-1 3.2 Brilliant-2
More informationOptimat BHX 500 CNC-Processing Center
Optimat BHX 500 CNC-Processing Center Optimat profi line power line Optimat BHX 500 Workpiece dimensions: Length: max. 2500 (3000*) mm min. 200 mm Width: max. min. 1000 (1300**) mm 70 mm Height: max. 80
More informationCNC-Processing Centers. BMG 400 Series
CNC-Processing Centers The BMG Series - The New Generation of CNC Processing Centers BMG stands for maximum flexibility as well as absolutely outstanding performance. Thanks to the modular design you can
More informationScott+Sargeant Machinery Ltd
(0) 1403 1403 273000 273000 Web 00L0063681A REV. N. 00-03.2013 - Olimpia - automatic wide belt sander. automatic wide belt sander. Accuracy and performance that lasts forever. The new is now more robust
More informationCNC-Processing Center Venture 109
CNC-Processing Center 2014/2015 lights: Routing dimension in Y direction: 1550 mm Vector speed X/Y 80 m/min Simple positioning of the vacuum cups through the pin laser 24 vacuum cups in standard version
More informationKSA 8 sanding machine for large sanding widths
KSA 8 sanding machine for large sanding widths The whole production of Heesemann sanding machines is located at the headquarters in Bad Oeynhausen, Germany. HeesemanN Sanding with Dedication Heesemann
More informationCNC-Processing Centers BHX 500 series
CNC-Processing Centers BHX 500 series 02 HOMAG BHX 500 Contents HOMAG BHX 500 Contents 03 BHX 500 series Drilling just for professionals... The Result: YOUR SOLUTION Never before was the WEEKE drilling
More informationCNC Gantry-Processing Center Optimat BHX 500 series
CNC Gantry-Processing Center Optimat BHX 500 series BHX 500 500/D 560 560/D 2009 The new BHX 500 series There s no limit to flexibility Highlights: n Workpiece thickness up to 80 mm n Controlling of the
More informationCNC-Processing Center Venture 440
CNC-Processing Center Venture 440 Venture 440 Highlights: Machine frame made of SORB TECH è faster vibration absorption (up to 80%) 3 working lengths available: 3300 / 4500 / 6500 mm Routing dimension
More informationwide belt sanders dmc sd 10 automatic wide belt sanders
wide belt sanders EVERYTHING YOU NEED WITH NO COMPROMISES 1 SOLID FLEXIBLE COMPACT READY EFFICIENT Sturdy and ergonomic steel main frame to satisfy all requirements One unit, three possible configurations
More informationCNC Gantry-Processing Centers Vantage 200
CNC Gantry-Processing Centers Nest & More Vantage /// German Technology MATRIX MATRIX Configuration Standard: 12 HP (9 kw) HSK routing spindle Optional: 16 HP (12 kw) HSK routing spindle Tool changing
More informationCNC-Processing Center Venture 109
CNC-Processing Center Venture 109 Venture 109 Highlights: Vector speed X/Y 80 m/min Simple positioning of the vacuum cups through the pin laser 24 vacuum cups in standard version K-table tubeless vacuum
More informationMFA 10 Multi-purpose surface sanding machine
MFA 10 Multi-purpose surface sanding machine The whole production of sanding machines is located at the headquarters in Bad Oeynhausen, Germany. HeesemanN - Sanding with dedication Heesemann has produced
More informationThroughfeed Drilling Machines Optimat BST Series
Throughfeed Drilling Machines Optimat BST Series Optimat / 503 / 505 / 507 "...it is an immutable law in business that words are words, explanations are explanations, promises are promises but only performance
More informationCNC-Gantry Processing Center BHT 500
Furniture pictures by kind permission of Möbel Wöstmann, Gütersloh. Equipment as described in this brochure is subject to technical changes and further developments. Some photos show options which are
More informationCNC-Processing Center
CNC-Processing Center 2010 Venture 2 All inclusive»standards«high-speed 7500 Automatic spindle clamping Workpiece feeding rail Pictures may also show options Spindles with 1500-7500 RPM incl. the patented
More informationABD 050/060 Optimat CNC-Drilling and Dowel Inserting Machine
BD 050/060 Optimat CNC-Drilling and Dowel Inserting Machine 02 HOMG BD 050/060 Optimat Contents HOMG BD 050/060 Optimat Contents 03 Horizontal drilling and dowelling in a single machine The Result: YOUR
More informationCNC-Processing Center
CNC-Processing Center 2010 Venture 5 All inclusive»standards«high-speed 7500 Automatic spindle clamping Workpiece feeding rail Tilting stops for veneer overhang Pictures may also show options Spindles
More informationTop Class Sanding Machines. Widebelt Sanders. Easy to operate, reliable and as precise as a Swiss watch
Top Class Sanding Machines Widebelt Sanders Easy to operate, reliable and as precise as a Swiss watch Editorial Surface treatment adds the finishing touch in every product s manufacturing process. It gives
More informationMFA 10 Multi-purpose surface sanding machine
MFA 10 Multi-purpose surface sanding machine The whole production of sanding machines is located at the headquarters in Bad Oeynhausen, Germany. HeesemanN Sanding with passion Heesemann has produced sanding
More informationEdge banders CNC machining centres Vertical panel saws Pressure beam saws. Compact Dimensions Maximum Performance CUT 6120
Edge banders CNC machining centres Vertical panel saws Pressure beam saws Compact Dimensions Maximum Performance CUT 6120 P R D U C T I V I T Y A N D P R E C I S I N C U T 6 1 2 0 The saw with the high
More informationSANDYA 9 S. Automatic wide belt sander
UK SANDYA 9 S Automatic wide belt sander OUR TECHNOLOGY BEHIND YOUR IDEAS sandya 9 s Automatic wide belt sander with two or three operating groups CALIBRATING SANDING 3D DESIGN PROGRAMMING CUTTING EDGE
More informationIntelligently controlled. Precisely profiled. Four-sided solution.
Intelligently controlled. Precisely profiled. Four-sided solution. Our Planing and Moulding Machine MOULDTEQ M-300 YOUR SOLUTION 02 HOMAG MOULDTEQ M-300 Highlights Prepared for the future With the MOULDTEQ
More informationCNC Gantry-Processing Centers Vantage 200
CNC Gantry-Processing Centers Vantage 200 02 HOMAG Vantage 200 Contents HOMAG Vantage 200 Contents 03 Vantage 200 The power pack among our nesting solutions The Result: YOUR SOLUTION Our CNC processing
More informationEdge banding machines Ambition
Edge banding machines Ambition 1210-1230 Intelligent woodworking solutions HOMAG Group Success through partnership To survive in a fiercely competitive market, a company has to have fast, flexible and
More informationDrilling system BST 800
Drilling system BST 800 02 HOMAG BST 800 Contents HOMAG BST 800 Contents 03 BST 800 pure dynamics an adventure The Result: YOUR SOLUTION Up to 674 individually activated high-speed spindles provide a unique
More informationThe next generation. MFA Impression Sanding surfaces perfectly
The next generation MFA Impression Sanding surfaces perfectly The whole production of Heesemann sanding machines is located at the headquarters in Bad Oeynhausen, Germany. HeesemanN Sanding with passion
More informationEdge banding machines Ambition
05/11 creativ design Edge banding machines Ambition 1650-1680 A member of the Homag Group of Companies BRANDT Kantentechnik GmbH Weststraße 2 32657 Lemgo Germany Tel. +49 5261/974-0 Fax +49 5261/6486 info@brandt.de
More informationEdge banding machines Ambition
04/13 creativ design Edge banding machines Ambition 1650-1670 A member of the Homag Group of Companies BRANDT Kantentechnik GmbH Weststraße 2 32657 Lemgo Germany Tel. +49 5261/974-0 Fax +49 5261/6486 info@brandt.de
More informations e in WEBER h c a KSV M g in d n a S l tria s u d In
Industrial Sanding Machines WEBER KSV Future today! 100 years of manufacturing drum sanders and Available in 5 working widths (1100, 1350, 1600, 1900 and 2250 mm = 43, 53, 63, 75, and 88 ) Compact machine
More informationMFA 10 OSR Orbital scratch removal
MFA 10 OSR Orbital scratch removal removal of sanding scratches Using Heeseman OSR TM unit When sanding frames and other work pieces with different grain directions sanding against the grain direction
More informationTHIN SHEET AND HEAVY PLATE MACHINING. WEBER PT Grinding Machine A new dimension of grinding, rounding deburring and descaling
THIN SHEET AND HEAVY PLATE MACHINING WEBER PT Grinding Machine A new dimension of grinding, rounding deburring and descaling 1913 WEBER works according to a 100-year-old tradition and experience in building
More informationdouble-end tenoners celaschi p60 automatic double end tenoner
double-end tenoners celaschi p60 automatic double end tenoner celaschi p60 automatic double end tenoner Ideal for squaring, tenoning, profiling, sizing, shaping, drilling, sanding etc. on any type of material:
More informationWEBER Grinding Machines
HEAVY PLATE MACHINING WEBER Grinding Machines Grinding, rounding, deburring and descaling of fl ame-cut and plasma-cut parts 1913 WEBER works according to a 100-year-old tradition and experience in building
More informationRETURN systems. durable customer-specific space-saving. DESTACKING ROTATING
RETURN systems durable customer-specific space-saving durable customer-specific space-saving RETURN 04 Universal, simple return system with maximum benefit Barbaric Quality RETURN 03 Made in Austria As
More informationAutomatic edge banders ME 15 - ME 20. English
Automatic edge banders ME 15 - ME 20 English Sheet processing Mechanical processing Painting Groups assembly A GREAT GROUP, GREAT PRODUCTS, GREAT QUALITY The SCM Group is a world leader for woodworking
More informationWork time = Money! Optimised production processes save time.
NEW H10 Work time = Money! Optimised production processes save time. FORMAT-4 machines will save you time, and increase the productivity and ability of your company. Job for job. e.g. New : H10 Panel Shaping
More information4D - high-end sawing centre CONTROL EVOLUTION STANDARD COMPACT. The Universal Class for Vertical Panel Saws
4D - high-end sawing centre CONTROL EVOLUTION COMPACT The Universal Class for Vertical Panel Saws Experience, skill, precision Tried-and-tested over decades, it can almost be considered the VW-Beetle of
More informationCamGrind L. Key data. Superproductive and perfect for batch production. A member of the United Grinding Group
A member of the United Grinding Group Superproductive and perfect for batch production Key data The as a single-slide or two-slide machine allows you to machine shaft-type components with a length of up
More informationEdge banding machines Ambition KDF 440 edition
04/13 creativ design Edge banding machines Ambition 1430-1440 KDF 440 edition A member of the Homag Group of Companies BRANDT Kantentechnik GmbH Weststraße 2 32657 Lemgo Germany Tel. +49 5261/974-0 Fax
More informationShaftGrind S. Key data. Compact and extremely versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Compact and extremely versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees
More informationThe complete package for your success!
The complete package for your success! Variable like your requirements With the BHC550, we offer you the possibility to assemble your own individual CNC-Machining Center package from the many already proven
More informationSTANDARD S STRIEBIG 4D CONTROL EVOLUTION STANDARD S STANDARD COMPACT. VERSATILE PRECISE SOLID Universal vertical sawing technology
WWW.STRIEBIG.COM STRIEBIG 4D CONTROL EVOLUTION STANDARD COMPACT VERSATILE PRECISE SOLID Universal vertical sawing technology UNIVERSAL VERTICAL SAWING TECHNOLOGY The Swiss label symbolises quality, safety,
More informationWe coat everything! survey of machines. customized machinery made in germany
We coat everything! survey of machines applications material machines accessories products Axel Wirth Maschinen GmbH Aalener Str. 76 80 D-73447 Oberkochen / Germany Phone +49 (0)7364 9577090 Fax +49 (0)7364
More informationCamGrind S. Key data. Small and versatile. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Small and versatile Key data The allows you to grind shaft-type workpieces with a length of up to 650 mm. This small, versatile grinding machine guarantees high-precision
More informationW 40. Automatic Surface Grinding Machine
W 40 Automatic Surface Grinding Machine W 40 Automatic Surface Grinding Machine Sharpness and surface flatness of mincer and emulsifier cutting tools have a great impact on the quality of sausage products.
More informationSPRINT 1320 /1321. Special Machines. The benchmark for flexibility and high productivity. Y our partner for productivity and precision
SPRINT 1320 /1321 The benchmark for flexibility and high productivity Y our partner for productivity and precision Special Machines SPRINT 1320 /1321 Two series, individual equipment packages SPRINT 1320
More informationThe complete sanding solution.
ABRASIVES The complete sanding solution. The Hermes wide belt product family for sanding chipboard and fibreboard wide belt product family The -wide belt product family are especially developed for sanding
More informationSANDING Sanding machines for sanding of solid wood and veneer
WOOD PROCESSING TECHNOLOGY SANDING Sanding machines for sanding of solid wood and veneer 2 SANDING Sanding machines for sanding of solid wood and veneer Precision, reliability, speed and convenience WEGOMA
More informationCNC machining centres. morbidelli p800. multifunctional machining centre for panel drilling routing and edge-banding
CNC machining centres morbidelli p800 multifunctional machining centre for panel drilling routing and edge-banding morbidelli p800 Designing and building solutions to your requirements is in our DNA You
More informationEdge banders CNC machining centres Vertical panel saws Pressure beam saws. The perfect nesting technology DYNESTIC
Edge banders CNC machining centres Vertical panel saws Pressure beam saws The perfect nesting technology DYNESTIC 755 756 P R O D U C T I V I T Y A N D P R E C I S I O N D Y N E S T I C 7 5 5 7 5 6 Precise,
More informationHorizontal finger jointing lines HS
Horizontal finger jointing lines HS The innovative solution for horizontal finger jointing WEINIG GRECON high-capacity horizontal finger jointing lines technology and speed for economical and efficient
More informationHydraulic Swing Beam Shear POWERcut
RAS Reinhardt Maschinenbau GmbH RAS : Much more than just power! A concept for all requirements Do you often find burrs on the cut pieces, because you forgot to adjust the blade clearance properly? Are
More informationthroughfeed moulders superset tx automatic throughfeed moulder
throughfeed moulders superset tx automatic throughfeed moulder superset tx automatic throughfeed moulder Topset XL is the ideal solution for producing prismatic profiles, frames, profiles and linear parts
More informationCONTRIGA Modular, multifunctional, maximum perform ance Data to enthuse over The CONTRIGA series is a future-oriented milestone for edgebanders. It ha
UNO 1302/1303/1304 SPRINT 1310/1312/131 5 / 131 7 /1320/1321 CONTRIGA CONTRIGA Superior technology outstanding design Edgebanders Your partner for productivity and precision Spezialmaschinen CONTRIGA Modular,
More informationHIGH QUALITY HIGH PRODUCTIVITY NO COMPROMISE. Océ Arizona 6100-Series
HIGH QUALITY HIGH PRODUCTIVITY NO COMPROMISE Océ Arizona 6100-Series PUSHING THE BOUNDARIES IN DIRECT PRINT PRODUCTION - High productivity without compromising on print quality - Impressive print speeds
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationThe most economical deburring machines in the world. Paul ERNST Maschinenfabrik GmbH
The most economical deburring machines in the world Paul ERNST Maschinenfabrik GmbH Paul ERNST Maschinenfabrik GmbH Company Ernst was established over 50 years ago. During first years ERNST was a successful
More informationBrandt Automatic Edgebander Optimat Model KDF 670 2C
Brandt Automatic Edgebander Optimat Model KDF 670 2C PC-16 Program Control: - Color matrix LCD screen display - 8mb RAM - Manual push button controls or program control operation Equipped with digital
More informationRepeatability. ± 0.2 µm ( '') Centrally focused / 639 nm / <1 mw. Temperature range 10 C - 50 C
Measuring on Machine Tools Technical Data The is a high-end system for dynamic, non-contact tool measurement allowing automatic checks for tool wear or breakage. A focussed laser provides accurate measurement
More informationEdge banding machines Ambition KDF 660 edition
04/13 creativ design Edge banding machines Ambition 1650-1670 KDF 660 edition Including BOOMERANG return systems A member of the Homag Group of Companies BRANDT Kantentechnik GmbH Weststraße 2 32657 Lemgo
More informationSalmon Fresh Slicing. Horizontal slicing
Salmon Fresh Slicing Horizontal slicing High quality slicing Automatic in-feed and out-feed Minimum waste User-friendly operation Easy-to clean design Horizontal slicing machines Within fresh slicing of
More informationKASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts.
KASTOssb A 2: Fully Automatic Bandsawing Machine for Mass Production Cuts. KASTOssb: More Economic Mass Production Cutting. Great performance, efficient footprint. The vertically running saw blade characterizes
More informationelectronically programmable and manual spindle moulders
electronically programmable and manual spindle moulders scmspindle moulders The widest range of spindle moulders offering the market the latest and most advanced technological solutions urgently required
More informationelectronically programmable and manual spindle moulders
electronically programmable and manual spindle moulders scmspindle moulders The widest range of spindle moulders offering the market the latest and most advanced technological solutions urgently required
More informationCALIBRATION AND GRINDING OF CONCRETE BLOCKS THICKNESS
FINISHING LINE FOR CONCRETE BLOCKS AND SLABS CASSANI CALIBRATION AND GRINDING MACHINES, SERIES M50 BLOCK, FOR BLOCKS AND SLABS IN AGGLOMERATE CONCRETE M50 BLOCK MODEL TECHNICAL DATA Possibility to use
More informationKentwood M509X 5 Head Moulder
TECH SPEC MS 31513 PAGE 1 Kentwood M509X 5 Head Moulder The Kentwood M509X 5 Head through feed Moulder s heavy cast iron construction, tight tolerance spindle assemblies, rugged feed works, heavy duty
More informationMY NEW WA 80. FEATURES, OPTIONS.
MY NEW WA 80. FEATURES, OPTIONS. 2 ALTENDORF WA 80 Two models, one promise: Performance, you can count on. WA 80 TE Page 4 WA 80 X Page 6 Altendorf WA 80 TE with motorised rise / fall and tilt adjustment
More informationComplete technology for the manufacture of wooden buildings
Complete technology for the manufacture of wooden buildings Effective manufacture based on your ideas Precision and reliability with maximum productivity Framer Basic is intended for start-ups with the
More informationEfficiency In Action!
Efficiency In Action! The Optimat BHC 750, with all of its diverse configuration possibilities, is a highly effective solution to your requirements. Whether your business is in store fixtures, solid wood
More informationCIRCULAR SAWS. Production system for grinding tooth faces/tooth tops and side angles CC 355
CIRCULAR SAWS Production system for grinding tooth faces/tooth tops and side angles CC 355 / CIRCULAR SAWS // TOOTH FACES/TOOTH TOPS AND SIDE ANGLES MAXIMUM FLEXIBILITY AND PRODUCTIVITY IN THE MANUFACTURE
More informationSAMPLE PREPARATION SPECTRAL MMAX. metkon.com
SAMPLE PREPARATION SPECTRAL MMAX metkon.com FULLY AUTOMATIC FINE SURFACE MILLING MACHINE SPECTRAL MMAX The SPECTRAL MMax is designed for fully automatic sample preparation of steel and cast iron as well
More informationFlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company
FlexiRip»JrionLine«Universal sawing centre the perfect fit for any size company The universal genius from WEINIG: FlexiRip is synonymous with flexible ripping The original Jrion from WEINIG stands for
More informationCamGrind L. Key data. Superproductive and perfect for batch production. A member of the UNITED GRINDING Group
A member of the UNITED GRINDING Group Superproductive and perfect for batch production Key data The as a single-slide or two-slide machine allows you to machine shaft-type components with a length of up
More informationCamGrind Cylindrical and noncircular grinding
A member of the UNITED GRINDING Group CamGrind Cylindrical and noncircular grinding Key data Camshaft grinding to perfection! The CamGrind series offers modular precision machines for cylindrical and noncircular
More informationwet processing Processing Technology
wet processing we process the future Processing Technology SAND TRAP AND DOUBLE SAND TRAP TASK Sand traps serve for the cleaning and simultaneous dewatering of sand from upstream screening machines with
More informationOptions book Planers
Options book Planers www.martin.info Alongside the basic equipment MARTIN planers have numerous, useful and also patented options, which perfect your workpiece and add value to your machine. Easily configure
More informationCHX 840 and CHX 1300 CIRCULAR SAW. Versatile sharpening machine for TCT circular saw blades up to 840 or 1300 mm in diameter
CHX 840 and CHX 1300 CIRCULAR SAW Versatile sharpening machine for TCT circular saw blades up to 840 or 1300 mm in diameter CIRCULAR SAW TOOTH FACE AND TOOTH TOP FOR WHEN YOU REQUIRE THAT LITTLE BIT MORE.
More informationHauschild GmbH. Magazine systems, Process automation, Robotic machining cells, Sorters
GmbH Hauschild Hauschild GmbH Kohlfurther Brücke 69 42349 Wuppertal Germany Tel.: +49 202 24742-0 Fax: +49 202 24742-42 info@hauschildgmbh.com www.hauschildgmbh.com Magazine systems, Process automation,
More information10/2008 GOLDEN PLUS DIAMANTE 18 DIAMANTE PLUS NUMERICAL CONTROL WORKING CENTRES 3 AND 4 INTERPOLATED AXIS + TILTING HEAD
10/2008 GOLDEN PLUS DIAMANTE 18 DIAMANTE PLUS NUMERICAL CONTROL WORKING CENTRES 3 AND 4 INTERPOLATED AXIS + TILTING HEAD STONECAM 3D, the cad-cam program easy and intuitive For the usage of its Numerical
More informationPRODUCTS Spezialmaschinen
PRODUCTS 2008 Spezialmaschinen Wherever professionals are precisely machining materials in panel form, you will find HOLZ-HER s edgebanders CNC machining centres pressure beam saws and panel saws. Both
More informationolimpic k 560 automatic edge bander
automatic edge bander automatic edge bander O3 Compact and productive, the Olimpic k 560 has been designed to operate for many hours per day with a 18 m/min feed speed. It is the perfect solution for all
More informationteam 00L D longitudinal and transversal profiling machine for parquet fl ooring and coating.
SCM GROUP SPA CELASCHI - via Casale 450-47826 Villa Verucchio, Rimini - Italy tel. +39 0541 674111 - fax +39 0541 674235 - celaschi@scmgroup.com - www.scmgroup.com 00L0066054D REV. N. 00-01.2012 - Ad LifeInPixel
More informationCircular Saws for Steel. The KKS Series The Reliable All-Rounder
Circular Saws for Steel The Series The Reliable All-Rounder The Series The Reliable All-Rounder Upstroking cold saws reflect Kaltenbach s unique experience and innovative history 400 / 450 The turntable
More informationProcessing Centers. Venture 21/23
Processing Centers Venture 21/23 Venture 21 and Venture 23 Alongside versatile routing functions, the compact Venture 21 and Venture 23 processing centers offer a range of unique additional functions:
More informationYour move to perfection. Product catalog Wood working machines. 25 years of competence MB Maschinenbau GmbH
Your move to perfection Product catalog Wood working machines 25 years of competence MB Maschinenbau GmbH MB Maschinenbau MB Maschinenbau GmbH Founded: 1992 Founder: Ronald Busch Gen. manager: Ronald Busch
More informationsolution Single-sided automatic edge banders
solution Single-sided automatic edge banders scmsolution The effective and high-quality solution for every edge banding requirement O3 solution high productivity with corner rounding up to 30 mmin technologies
More informationMachines for wire processing
Machines for wire processing Welcome to WiTechs In 2008, Ernst Koch GmbH & Co. KG joined forces with WTHK GmbH, another Hemer-based company, to found a new enterprise: WiTechs GmbH. Close collaboration
More informationEXXACT PLUS New generation of machine for heavy duty wood composite and plastic processing
2 ANDERSON GROUP EXXACT PLUS New generation of machine for heavy duty wood composite and plastic processing With over 40 years of experience in machine engineering and production, Anderson has developed
More informationMETALLOGRAPHY EQUIPMENT
Fully matic Abrasive Cutting Machine - SERVOCUT 602 www.worldoftest.com/fully-automatic-abrasive-cutting-machine-servocut-602 Applications: Fully matic Abrasive Cutting Machine - SERVOCUT 602 is a fully
More information