OWNER S MANUAL AMERICA S PREMIER EXERCISE EQUIPMENT RHL-305WS. High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-265) 84" 59" 50 3/4"

Transcription

1 OWNER S MANUAL 84" RHL-0WS 0 /4" 9" High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-26) AMERICA S PREMIER EXERCISE EQUIPMENT RHL-0WS Rev0 Revision Date

2 Introduction About the RHL-0WS High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-26) Congratulations on your new purchase of the High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-26). We hope you are completely satisfi ed with this product and wish you many years of enjoyment. Tuff Stuff Equipment This Tuffstuff product has been built to precise quality standards and has been carefully packaged to ensure that damage will not occur during shipment. The Home Lifetime Warranty and signature indicating fi nal inspection has been conducted by our line foreman, is an expression of our confidence in the completeness, the materials, and workmanship of this product. Warranty SEE A COPY OF WARRANTY ON BACK PAGE. Registration Card To avoid unnecessary delays in warranty service and to insure that a permanent record of your purchase is on file with our factory, be sure to complete the warranty registration card and send it to TuffStuff Fitness Equipment today. Specifications 1. Maximum Wt. Capacity lbs. 2. Total Machine Weight - lbs.. Footprint (LWH) - See Front Cover. Note: Due to continuing product improvements, specifi cations and designs are subject to change without notice. Prior to the Assembly of the High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-26) 1. We advise you to consult your local Tuff Stuff retailer if you should have a question or problem regarding the proper assembly of this unit. Tool Requirements 1. One 7/8 combination wrench 2. One /4 combination wrench. One 9/16 combination wrench 4. One ratchet. One 9/16 socket 6. One rubber mallet 7. Windex or household glass cleaner 8. Measuring tape 9. Utility knife Hardware Measurement Diagram SCREW WIDTH SCREW LENGTH WASHER DIAMETER NUT DIAMETER Step 1 2 ADJUSTABLE FOOT SUPPORT 1 BOTTOM ASSEMBLY HOLDER 1 16 BLACK NYLON PULLEY /8 X 1 X 1/2 2 FLAT WASHER SAE /8 8 HEX HEAD CAP SCREW /8-16 X 1 /4 2 2 HEX HEAD CAP SCREW /8-16 X 2 HEX HEAD CAP SCREW /16-18 X /4 1 NYLON INSERT JAM LOCK NUT / RHL-0WS High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-26)

3 Step 2 GUIDE ROD /4 X 71 1/ SELECTOR PIN W/COIL /8 X LB STEEL WEIGHT PLATE BLACK LB TOP PLATE W/22 SLTR BAR 1 2 DECAL-WEIGHT NUMBERS 1 0 RUBBER DONUT /4 X 2 1/ RHL-0WS High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-26)

4 Step 7 LAT BAR HOLDER 1 11 TOP ASSEMBLY 1 FLAT WASHER SAE /8 27 HEX HEAD CAP SCREW /8-16 X HEX HEAD CAP SCREW /8-16 X 2 NYLON INSERT JAM LOCK NUT / SPLIT LOCK WASHER / Step 4 GUIDE ROD /4 X 71 1/2 2 FLAT WASHER SAE / HEX HEAD CAP SCREW /8-16 X 2 1/2 2 NYLON INSERT JAM LOCK NUT / Note: Lift the Guide Rods to allow the insertion of the two Hex Head Cap Screws RHL-0WS High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-26)

5 RHL-0WS Cable Routing Diagram FIG. A FIG. B FIG. C RHL-0WS High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-26)

6 RHL-0WS Exploded View Diagram RHL-0WS High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-26)

7 COLOR CHART BOLD FONT = SUB-ASSEMBLY PARTS BLACK= HARDWARE RHL-0WS Parts List ITEM DESCRIPTION REV PART NO. QTY ITEM DESCRIPTION PART NO. QTY 1 ADJ PULLEY PLATE 1/8 X 2 X 9 0 UP HEX HEAD CAP SCREW GR- Z/P /8-16 X BNH ADJUSTABLE FOOT SUPPORT 0 UP99 1 HEX HEAD CAP SCREW GR- Z/P /16-18 X /4 BNH BOTTOM ASSEMBLY HOLDER 0 UP HEX KEY /16" BNH FOAM FOOT ROLL 1 X 4 X 16 W/VINYL 0 UP98 1 HEX KEY ALLOY /2" BNH07 1 GUIDE ROD /4 X 71 1/2 0 UP HEX KEY ALLOY 7/2" BNH HOLD DOWN BAR 0 UP HITCH PIN 210 WW BNH LAT BAR HOLDER 0 UP LAT BAR 48" BNH LAT CABLE 0 UP LITHIUM GREASE SMALL CONTAINER BNH LOW ROW CABLE 0 UP LOW ROW BAR 20" BNH SELECTOR PIN W/COIL /8 X 4 0 UP NYLON BALL W/THREADED SOCKET 1 /4 X /16 BNH TOP ASSEMBLY 0 UP96 1 NYLON INSERT JAM LOCK NUT Z/P /8-16 BNH LB STEEL WEIGHT PLATE BLACK 4 9/16 X 9 7/16 BNH NYLON INSERT LOCK NUT Z/P /16-18 BNH LB TOP PLATE W/22" SLTR BAR 19 BLK WTS BNH PLASTIC INSERT CAP 1" X 2" BNH ALUMINUM WASHER.90 ID X 1.00 OD X.10 THK BNH PLASTIC INSERT CAP 2 X BNH BLACK NYLON PULLEY /8 X 1 1/2 X 4 1/2 (V700) BNH PLASTIC INSERT CAP 2" RD BNH BLACK NYLON PULLEY /8 X 1 X 1/2 BNH PLASTIC INSERT CAP ELLIPTICAL 2 X 4 BNH94 2 BLACK NYLON PULLEY /8 X 1 X 4 1/2 BNH PLASTIC INSERT ELLIPTICAL GUIDE (2X4) BNH BLACK RUBBER GRIP 1/2 X 4 7/8 BNH PULL PIN 1/2 X 2 7/8 (YELLOW) BNH BUTTON HEAD SOCKET CAP SCREW Z/P /8-16 X 1 BNH RUBBER DONUT /4 X 2 1/2 BNH COIL CHAIN Z/P /16 X 21 BNH RUBBER GRIP 1 X 6 1/4 BNH DECAL-ADJUST CABLE HERE BNH RUBBER GROMMET /4" ID (67-012) BNH DECAL-DANGER TIGHTEN THIS RET BNH01 1 SHOULDER BOLT ALLOY /8 X /4 BNH DECAL-WEIGHT NUMBERS REF TP-10 (200 lbs) BNH1 1 4 SNAP LINK Z/P 8MM X 80MM BNH FINISHED HEX NUT B/O 1/2-1 BNH SOCKET SET SCREW ALLOY 10-2 X 1/8 BNH047 1 FLAT WASHER SAE Z/P /8" BNH200 6 SOCKET SET SCREW ALLOY /8-16 X /4 BNH FOAM ROLL 1" NYLINER BUSHING BNH SPLIT BOLT Z/P 1/2-1 X 1 BNH HEX HEAD CAP SCREW GR- Z/P /8-16 X 1 BNH SPLIT HEX TAP BOLT GR- B/O 1/2-1 X 1/2 BNH111 1 HEX HEAD CAP SCREW GR- Z/P /8-16 X 1 /4 BNH SPLIT LOCK WASHER Z/P 1/2" BNH HEX HEAD CAP SCREW GR- Z/P /8-16 X 2 1/2 BNH SPLIT LOCK WASHER Z/P /8" BNH HEX HEAD CAP SCREW GR- Z/P /8-16 X 2 /8 BNH STRAP BRACKET 20 #SF20 BNH HEX HEAD CAP SCREW GR- Z/P /8-16 X BNH DECAL-FOR BEST PERFORMANCE BNH014 1 REV0 RHL-0WS High/Low Pulley W/200 Lbs Steel Wt Stack (for RPR-26) 7