Hi-TECH 550BB/700BB/700BB + 850BB/850BB +

Transcription

1 Hi-TECH 550BB/700BB/700BB + 850BB/850BB + High Rigid Big Bore Turning Centers

2 2 Hwacheon catalog : Hi-TECH 550BB/700BB/700BB + /850BB/850BB + High Rigid BIG BORE Turning Centers The extra scale through-spindles incorporated in the BB-series turning centers are built for turning those extra-length applications, such as the oil pipes. The heavy duty dual air chucks sitting in front and back of the spindle provides extra stability for increased productivity.

3 Horizontal Big Bore Turning Centers HIGH PERFORMANCE EXTRA-LARGE BIG BORE TURNING CENTERs Line-Up Hi-TECH 550BB/550BBL Hi-TECH 700BB Hi-TECH 700BB + Hi-TECH 850BB/850BBL Hi-TECH 850BB + /850BB + L Bar Size Ø180 (Ø7.08") Ø180 (Ø7.08") Ø25 (Ø11.1") Ø25 (Ø11.1") Ø70 (Ø14.57") 1 Drill Casing Adaptor/ Oil Field 2 Steel Oil Pipe/ Oil Field Drill Pipes for Oil and Gas/ Oil Field 4 Land-Based Oil Rigs 1 2 4

4 4 Hwacheon catalog : Hi-TECH 550BB/700BB/700BB + /850BB/850BB + THE Hi-TECH BB SERIES OF BOX-WAY, GEAR-BOX BIG BORE TURNING SOLUTIONS Hwacheon's Hi-TECH 550BB, 700BB, 700BB +, 850BB, and 850BB + turning centers are designed for most demanding industrial applications. These tough, highly precise machines employ extra-scale through-spindles, and the two heavy duty air chucks in front and rear of the spindle guarantee perfect results, every time. The 45-degree tilt unibody bed equipped in each model is ideal for most demanding hard-turning jobs, and the Hi-TECH BB series turning centers employ the box way design in all guide surfaces for maximum stability and precision after hours of prolonged operation. The gear-transmission spindle assembly provides both low-torque and high speed turning enable increased productivity.

5 Horizontal Big Bore Turning Centers 5 HIGH RIGID BIG BORE SPINDLE FOR OIL PIPE Hwacheon provides you many different model options so you can have the right tool for your extra-length turning jobs and be more efficient. Choose from a Ø470, Ø0, or Ø850 air chuck, or a manual chuck, to suit your applications. This wide through-spindle is perfect for oil pipe machining and other long shaft applications. Optional manual chuck in the back Optional air chuck in front Have your machine customized with optional air chucks for even higher stability and precision. * Unit: mm(inch) Hi-TECH 550BB Hi-TECH 700BB Hi-TECH 700BB + Hi-TECH 850BB Hi-TECH 850BB + Maximum Turning Diameter Ø50(Ø2.2 ) Ø50(Ø25.5 ) Ø700(Ø27.5 ) Ø20(Ø.22 ) Ø20(Ø.22 ) Chuck Size Ø470(Ø18.5 ) Ø470(Ø18.5 ) Ø0(Ø24.8 ) Ø0(Ø24.8 ) Ø850(Ø.47 ) Through Spindle Hole Diameter Ø185(Ø7.28 ) Ø185(Ø7.28 ) Ø00(Ø11.81 ) Ø00(Ø11.81 ) Ø75(Ø14.7 ) Maximum Bar Size Ø180(Ø7.08 ) Ø180(Ø7.08 ) Ø25(Ø11.1 ) Ø25(Ø11.1 ) Ø70(Ø14.57 )

6 Horizontal Big Bore Turning Centers High Performance Spindle This performance spindle delivers high torque at low speed, while the internal gear array provides efficient braking power, along with the built-in high-performance brake. The bearings inside the spindle assembly are oil cooled, with Hwacheon's unique Oil Jet Cooling technology; and the gearbox temperature is efficiently regulated with the circulating oil coolant, for precision results at all time. This spindle system is specially effective for large size, heavy duty jobs. IN Oil cooler Spindle Oil(Iso vg 2) Hi-TECH 550BB: Grease Type Hi-TECH 700BB, 700BB + : Oil-Jet Type Hi-TECH 850BB, 850BB + : Oil-Jet Type Oil Tank Suction Pump OUT High Performance Turret Y axis can be added per your request; and the entire process from turning to milling can be performed with a single setting. This helps maintain your quality, and eliminates down time in between jobs by getting rid of unnecessary loading and unloading of work pieces. It's like having two machines in one, which means you'll be twice as productive. Ultra Wide Turret Disk Max. Long Borning Bar Size (D x L) Hi-TECH 550BB: Ø0 x 480mm - Opt.: Wide Type Turret Disk Hi-TECH 700BB/700BB + : Ø0 x 00mm - Opt.: Wide Type Turret Disk Hi-TECH 850BB/850BB + : Ø80 x 800mm - Std.: Wide Type Turret Disk Multitasking Run by a powerful AC spindle motor, the turnmill can accurately axis-index the spindle to perfectly mill, tap, or drill. DIfferent types of milling or turning job can be performed with a single chucking when the optional Y axis is installed. X-axis Polar Coordinate Interpolation C-axis Cylindrical Interpolation Z-axis C-axis

7 Horizontal Big Bore Turning Centers 7

8 8 Hwacheon catalog : Hi-TECH 550BB/700BB/700BB + /850BB/850BB + USER FRIENDLY DESIGN, A WIDE RANGE OF OPTIONAL FEATURES The BB-series turning centers are designed with end users in mind. Its user-friendly machine design and a variety of supplementary features ensure a stronger, faster and more precise machining performance. Accessibility translates to productivity. The side cover is designed to let hoist lifted large work pieces to be loaded and unloaded from the rear of the spindle, to maximize accessibility. Main cover pocket Rear Chuck Cover L-HTLD: Hwacheon Lathe Tool Load Detect System (Option) The Hwacheon Lathe Tool Load Detect System constantly detects and diagnoses the tool load under a process to prevent tool wear and damage, and to keep your machine and tools in optimal shape. Load Detection Limit 1 Load Detection Limit 2 Best steady rest performance in its class(option) Alarm + Feed Hold > When the LIMIT 1 Alarm sounds, the system holds the feed and the machine goes into stand-by. Alarm + Machine Stop > When the LIMIT 2 Alarm sounds, the system stops the machine, and must be reset to operate it. Thread Repair Function The Thread Repair Function on the Manual Guide I screen gives you an option to repair a stripped thread.

9 Product Data Product Data : Hi-TECH 550BB * Unit: mm(inch) 2,450 (.4 ) 2,0 (82.8 ) 18(.1 ) Short Type : 4,758 (187.2 ) / Long type : 5,758 (22. ) 8 (2.1 ) Short Type : 4,00 (1.2 ) / Long type : 5,00 (208. ) 1,50 (2.0 ) 1,282 (50.47 ) Short Type : 1,028 (40.47 ) 400 (15.75 ) Long type : 2,028 (7.84 ) Short Type : 2,400(4.4 ) Long type : 2,450 (.5 ) (Spindle Center) 50 (1.2 ) 1,14 (44.5 ) 1,700 (. ) 0 (27.1 ) Maintenance Door 78 (2. ) 1,150 (45.27 ) 8 (2.28 ) Side Front Spindle Power-Torque Diagram Hi-TECH 550BB (Main Spindle) Hi-TECH 550BB (Turnmill) (Max. Low Gear Speed: 545rpm) Torque(Nm) Low:,Nm(0min) Low: 2,70 Nm (Cont.) 7 kw (0min) 0 kw (Cont.) High: 14Nm(0min) High: 48Nm(Cont.) Power(kW) Torque(Nm) Low: 140Nm(0min) 11 kw (0min) Low: 5. Nm (Cont.) 7.5 kw (Cont.) Power(kW) Spindle Speed(rpm) Spindle Speed(rpm)

10 Hwacheon catalog : Hi-TECH 550BB/700BB/700BB + /850BB/850BB + Product Data : Hi-TECH 700BB/700BB + * Unit: mm(inch) 2,20 (1.4 ) 5,80 ( ) 1,70 (7.17 ) Maintenance Door 2,55 (.8 ) (Spindle Center) 18 (24. ) 1,178 (4.8 ) 520 (20.47 ) 715 (28.15 ) 81 (8.2 ) 1,872 (7.7 ) 1,050 (41.4 ) Side 20 (.0 ) Front Spindle Power-Torque Diagram Hi-TECH 700BB (Main Spindle) Hi-TECH 700BB + (Main Spindle) 5000 (Max. Low Gear Speed: 41rpm) Low: 4,4 Nm (0min) 45 kw (0min) (Max. Low Gear Speed: 41rpm) Low: 4,4Nm (0min) 45 kw (0min) Low:,84 Nm (Cont.) 7 kw (Cont.) Low:,8Nm (Cont.) 7 kw (Cont.) 40 Torque(Nm) High: 1,25Nm (0min) High: 1,0Nm (Cont.) 0 20 Power(kW) Torque(Nm) High: 1,21Nm (0min) High: 1,08Nm (Cont.) 0 20 Power(kW) Spindle Speed(rpm) Spindle Speed(rpm) Hi-TECH 700BB/Hi-TECH 700BB + (Turnmill) 250 Low: 11Nm Low: (0min) 140Nm(0min) Low: 140Nm (Cont.) 7.5 kw (0min) Torque(Nm) kw (Cont.) Power(kW) Spindle Speed(rpm)

11 Product Data 11 Product Data : Hi-TECH 850BB/850BB + * Unit: mm(inch),00 (11. ) [YMC:,180(125.2 )] Short Type :,80 ( ) / Long Type : 7,80 (0.45 ) Short Type:,50 (21.81 ) / Long Type: 7,50 (01.18 ) 2 (8.27 ),020 (118. ) (Spindle Center) 18 (24. ) 1,480 (58.27 ) 20 (0.7 )(Height of Plate) 00 (5.4 ) Maintenance Door 88 (4. ) 1,17 (4.41 ) Door Open Width Long Type :,770 (11. ) Short Type : 2,770 (.5 ) 1,50 (2. ) 1,80 (.14 ) 1,070 (42.1 ) Side Front Spindle Power-Torque Diagram Hi-TECH 850BB (Main Spindle) Hi-TECH 850BB + (Main Spindle) (Max. Low Gear Speed: 41rpm) 5000 Low: 4,4Nm (0min) 45 kw (0min) 50 (Max. Low Gear Speed: 200rpm) Low: 8,50Nm (0min) 45 kw (0min) Low:,8Nm (Cont.) 7 kw (Cont.) Low: 7,070Nm (Cont.) 7 kw (Cont.) 40 Torque(Nm) High: 1,21Nm (0min) High: 1,08Nm (Cont.) 0 20 Power(kW) Torque(Nm) High: 1,25Nm (0min) High: 1,0Nm (Cont.) 0 20 Power(kW) Spindle Speed(rpm) Spindle Speed(rpm) Hi-TECH 850BB/Hi-TECH 850BB + (Turnmill) 250 Low: 2Nm (0min) kw (0min) Low: 14Nm (Cont.) 12 Torque(Nm) kw (Cont.) Power(kW) Spindle Speed(rpm)

12 12 Hwacheon catalog : Hi-TECH 550BB/700BB/700BB + /850BB/850BB + Interference Diagram : Hi-TECH 550BB, Hi-TECH 700BB / 700BB + Unit : mm(inch) Hi-TECH 500BB STD Station ø87(15.2 ) ø70(2.2 ) ø70(2.7 ) ø0(2. ) 1 ø48(1.70 ) Max. Cutting Dia. ø50(2.22 ) 40(1.57 ) 25(11.1 ) 20(11.41 ) 20(11.41 ) X-Axis Stroke 580(22.82 ) 45(1.58 ) 25(24. ) 50(1. ) Hi-TECH 500BB STD 12 Station ø17(12.48 ) ø0(2. ) ø70(2.2 ) ø0(25.8 ) ø70(2.8 ) 40(1.57 ) ø281(11.0 ) Max. Cutting Dia. ø50(2.2 ) 20(11.41 ) 20(11.41 ) X-Axis Stroke: 580(22.82 ) 45(1.58 ) 25(24. ) 50(1.7 ) Hi-TECH 500BB MC ø40(25.20 ) ø0(2. ) ø740(2.1 ) ø275(.8 ) Max. Cutting Dia: ø50(2.2 ) 2(8.27 ) 420(1.54 ) 120(4.72 ) X-Axis Stroke 2(8.27 ) 25(24. ) 45(1.58 ) 50(1.7 ) Hi-TECH 700BB / 700BB + STD ø70(1.1 ) ø87(12.5 ) Ø0(5.5 ) (2.1 ) ø(1. ) Max. Cutting Dia. ø50(25. ) ø(1. ) 40(1. ) 40(1.4 ) 25(12.8 ) 80(15 ) X-Axis Stroke 0(14.2 ) 705(27.7 ) 5(1.4 ) Hi-TECH 700BB / 700BB + MC ø0(5.7 ) ø70(2.2 ) ø1(12.2 ) Max. Cutting Dia. : Ø50(25.5 ) ø87(15.24 ) ø58(14.0 ) 0(1.18 ) 40(1.57 ) (12.2 ) 25(12.7 ) 80(14. ) X-Axis Stroke 0(14.2 ) 70(28.74 ) 5(1.8 )

13 4 4 4 Tool Interference Diagram 1 Interference Diagram : Hi-TECH 850BB, Hi-TECH 850BB + Unit : mm(inch) Standard Tool Interference 55(2.1 ) ø51(7.44 ) ø00(5.4 ) ø70(1.1 ) 40(1.57 ) Swing Over Saddle ø825(2.48 ) 25(0.8 ) ø22(12.7 ) 5 4 Boring Bar 445mm ø80(14. ) Max. Cutting Dia. ø20(.22 ) 40(1.57 ) 40(1.8 ) 40(1.8 ) 80(2.77 ) X-Axis Stroke 485(1.0 ) 840(.07 ) MC Tool Interference Max.112.5(4.4 ) ø04.5(5.1 ) Max. Cutting Dia. ø20(.22 ) Swing Over Saddle ø825(2.48 ) ø5(1.8 ) 25(0.8 ) ø22.2(12.7 ) ø80(14. ) 570(22.44 ) X-Axis Stroke 485(1.0 ) 840(.07 ) YMC Radial Turnmill Holder Max.115(4.5 ) ø04.5(5.1 ) Max. Cutting Dia. ø20(.22 ) ø5(1. ) ø80(14. ) (.1 ) 155. (.1 ) 1 (4. ) 1 (4. ) 220(8. ) Swing Over Saddle ø825(2.48 ) X-Axis Stroke 485(1.0 ) 40(1.57 ) YMC Axial Turnmill Holder Max.115(4.5 ) ø04.5(5.1 ) Max. Cutting Dia. ø20(.22 ) ø5(1. ) ø80(14. ) (.1 ) 155. (.1 ) 1 (4. ) 1 (4. ) 220(8. ) Swing Over Saddle ø825(2.48 ) X-Axis Stroke 485(1.0 ).(1.1 )

14 14 Hwacheon catalog : Hi-TECH 550BB/700BB/700BB + /850BB/850BB + Moving Range Hi-TECH 550BB O.D Holder (Std.) O.D Holder (MC) 202 [7.5 ] Short-Type : Z-axis stroke 1,150 [45.27 ] Long-Type : Z-axis stroke 2,150 [84.4 ] 40 [1.57 ] 1 [.54 ] Short-Type : Z-axis stroke 1,150 [45.27 ] Long-Type : Z-axis stroke 2,150 [84.4 ] 40 [1.57 ] X-Axis stroke 45 [1.58 ] 50 [1. ] 0 [2. ] 88 [.4 ] 25 [0. ] 77 [.0 ] Short-Type : Tail stock stroke 80 [8.58 ] 77 [.0 ] Long-Type : Tail stock stroke 1,80 [77.5 ] 15 [12.41 ] X-Axis stroke 45 [1.58 ] 5 [1.8 ] Short-Type : Tail stock stroke 80 [8.58 ] Long-Type : Tail stock stroke 1,80 [77.5 ] 15 [12.41 ] [2.4 ] 40 [1.57 ] Radial Turnmill Holder Axial Turnmill Holder 1 [.54 ] Short-Type : Z-axis stroke 1,150 [45.27 ] Long-Type : Z-axis stroke 2,150 [84.4 ] 77 [.0 ] Short-Type : Tail stock stroke 80 [8.58 ] 77 [.0 ] Long-Type : Tail stock stroke 1,80 [77.5 ] 15 [12.41 ] X-Axis stroke 45 [1.58 ] Ø2 [Ø1.02 ] 1 [.54 ] Short-Type : Z-axis stroke 1,150 [45.27 ]. Long-Type : Z-axis stroke 2,150 [84.4 ] X-Axis stroke 45 [1.58 ] 0 [.54 ] 80 [.15 ] [11.42 ] [.0 ] Short-Type : Z-axis stroke 80 [8.58 ] Long-Type : Z-axis stroke 1,80 [77.5 ] 15 [12.41 ] Ø2 [Ø1.02] 80 [42.52 ] 70 [2.7 ] Hi-TECH 700BB / 700BB+ O.D Holder MAIN COVER 04 [12 ] Z-axis stroke 2,050 [80.7 ] X-axis stroke 0 [14.17 ] 5 [1.8 ] 80 [.1 ] 8 [0. ] 15 [5. ] O.D Holder (MC) MAIN COVER 285 [11.22 ] 225 [8.8 ] Z-axis stroke 2,050 [80.71 ] 0 [2. ] X-axis stroke 0 [14.17 ] 5 [1.8 ] 80 [.1 ] 22 [8.78 ] 254 [ ] 5 [2. ] 175 [. ] 18 [5.4 ] 142 [5.5 ] 405 [15. ] Tailstock stroke 1,8 [7.4 ] 142 [5.5 ] 405 [15. ] Tailstock stroke 1,8 [7.4"] Radial Turnmill Holder Axial Turnmill Holder MAIN COVER 285 [11.22 ] 14 [5. ] Z-axis stroke 2,050 [80.71 ] X-axis stroke 0 [14.17 ] 5 [1.8 ] 200 [7. ] Ø50 [Ø1.7 ] 175 [. ] 22 [8.78 ] 142 [5.5 ] 8 [.27 ] 220 [8.7 ] MAIN COVER 285 [11.22 ] Z-axis stroke 2,050 [80.71 ] 22 [8.78 ] 8 [.27 ] X-axis stroke 0 [14.17 ] 5 [4.1 ] 145 [5.7 ] Ø0 [Ø.4 ] 175 [. ] 45 [1.8 ] 142 [5.5 ] 405 [15. ] Tailstock stroke 1,8 [7.4 ] 142 [5.5 ] 405 [15. ] Tailstock stroke 1,8 [7.4 ]

15 Moving Range 15 Moving Range Hi-TECH 850BB / 850BB+ ID Holder (Std.) OD Holder (Std.) 122 [4.80 ] Short-Type : Z-axis stroke 2,50 [4. ] Long-Type : Z-axis stroke,50 [14.7 ] X-Axis stroke 485 [1.0 ] [.8 ] [15.77 ] 80 [.15 ] Short-Type : Tail stock stroke 2,500 [8.42 ] Long-Type : Tail stock stroke,500 [17.8 ] [1.54 ] 40 [1.57 ] 215 [8.4 ] 122 [4.80 ] 80 [.15 ] 24 [.8 ] Short-Type : Z-axis stroke 2,50 [4. ] Long-Type : Z-axis stroke,50 [14.7 ] X-Axis stroke 485 [1.0 ] 25 [0.8 ] 5 [4.1 ] Short-Type : Tail stock stroke 2,500 [8.42 ] Long-Type : Tail stock stroke,500 [17.8 ] 40 [1.57 ] [15.57 ] [0."] 1 [1.2 ] ID Holder (MC) OD Holder (MC) 122 [4.80 ] Short-Type : Z-axis stroke 2,50 [4. ] Long-Type : Z-axis stroke,50 [14.7 ] X-Axis stroke 485 [1.0 ] 40 [1.57 ] 215 [8.4 ] 122 [4.80 ] Short-Type : Z-axis stroke 2,50 [4. ] Long-Type : Z-axis stroke,50 [14.7 ] X-Axis stroke 485 [1.0 ] 25 [0.8 ] 5 [4.1 ] 40 [1.57 ] 24 [.8 ] 288 [11.2 ] 12 [0.4 ] 24 [.8 ] 278 [.5 ] 27 [1.05 ] 80 [.15 ] Short-Type : Tail stock stroke 2,500 [8.42 ] Long-Type : Tail stock stroke,500 [17.8 ] 80 [.15 ] Short-Type : Tail stock stroke 2,500 [8.42 ] Long-Type : Tail stock stroke,500 [17.8 ] Radial Turnmill Holder Axial Turnmill Holder 122 [4.80 ] Short-Type : Z-axis stroke 2,50 [4. ] Long-Type : Z-axis stroke,50 [14.7 ] 122 [4.80 ] Short-Type : Z-axis stroke 2,50 [4. ] Long-Type : Z-axis stroke,50 [14.7 ] X-Axis stroke 485 [1.0 ] 40 [1.57 ] 215 [8.4 ] X-Axis stroke 485 [1.0 ]. [1.1 ] 12. [4.85 ] 24 [.8 ] 288 [11.2 ] 55 [2.1 ] 24 [.8 ] 12.5 [4.8 ] 80 [.15 ] Short-Type : Tail stock stroke 2,500 [8.42 ] Long-Type : Tail stock stroke,500 [17.8 ] 80 [.15 ] Short-Type : Tail stock stroke 2,500 [8.42 ] Long-Type : Tail stock stroke,500 [17.8 ] 87.2 [.4 ] Extend O.D Long Boring Bar Short-Type : Z-axis travel 2,50 [4. ] Long-Type : Z-axis travel,50 [14.7"] 122 [4.80 ] 80 [.15 ] Short-Type : Z-axis stroke 2,50 [4. ] Long-Type : Z-axis stroke,50 [14.7 ] X-Axis stroke 485 [1.0 ] 5 [.74 ] 175 [.8 ] 24 [. ] 8 [15.5 ] Short-Type : Tail stock stroke 2,500 [8.42 ] Long-Type : Tail stock stroke,500 [17.8 ] 40 [1.57 ] (1.57 ) 1 [1.2 ] X-axis travel 485 [1.0 ] L=D, 800 [1.4 ] 250[.84 ] 58[,28 ] D, Ø80 [Ø,15 ] 15 [7.7 ],500 [17.7 ] L=14D, 1120 [44.0 ] 2,247 [88.4 ] 2,58 [1.1 ],411 [14.2 ] 2.5 [15.45 ]

16 1 Hwacheon catalog : Hi-TECH 550BB/700BB/700BB + /850BB/850BB + Product Configuration Hi-TECH 550BB Hi-TECH 550BB Ref. 1) STD: Tailstock 2) MC: Turnmill with C-axis (0.001 ) ) L: Long Bed Hi-TECH 550BB 550BB/MC Short Type Long Type 1,150 (45.28 ) 2,150 (84.5 ) Hi-TECH 550BBL 550BBL/MC STD STD MC MC Hi-TECH 700BB/700BB + Ref. 1) STD: Tailstock 2) MC: Turnmill with C-axis (0.001 ) Hi-TECH 700BB 700BB + Hi-TECH 700BB/700BB + STD MC Hi-TECH 700BB/MC 700BB + /MC Hi-TECH 850BB/850BB + Hi-TECH 850BB/850BB + Ref. 1) STD: Tailstock 2) MC: Turnmill with C-axis (0.001 ) ) YMC: Turnmill with C-axis (0.001 ) and Y-axis 4) L: Long Bed Hi-TECH 850BB 850BB/MC 850BB/YMC 850BB + 850BB + /MC 850BB + /YMC Short Type Long Type 2,500 (8.4 ),500 (17.7 ) STD STD MC MC Hi-TECH 850BBL 850BBL/MC 850BBL/YMC 850BB + L 850BB + L/MC 850BB + L/YMC YMC YMC

17 Machine Specifications 17 Standard and Optional product components : Hi-TECH 550BB Standard Accessories Optional Accessories Coolant System Tooling System Air Blower Tool Life Management Door Interlock Tool Kit & Box Air Chuck including Pneumatics Tool Presetter (Automatic) Foot Switch Work Light Control System, SCHUNK/ SMW Tool & Work Counter Hydraulic Unit ZF Gear Box Air Gun - External/ Internal Leveling Bolt & Plate.4 LCD Display Auto Door Transformer Lubrication System Chip Conveyor & Box (Side type) Turnmill Function Including Manual Guide i Coolant Gun C-axis (0.001 ) Operation Manual & Parts List High Pressure Pump System Turnmill Holder (Axial/ Radial) Signal Lamp with 2 Colors (R, G) - bar/ 15bar/ 70bar Turnmill Spindle Motor Upgrade Standard Turret, pos. Linear Scale (X/ Z) - 11/7.5kW Tailstock, MT#5 Manual Chuck, 20" U-Drill Holder - Tailstock Body Program NC Cooler Wide Type Turret Disk - Tailstock Quill Program Oil Skimmer Lathe-Hwacheon Tool Load Detect Signal Lamp with Colors (R, G, Y) (L-HTLD) Standard Turret, 12 pos. Steady Rest Base Set Steady Rest Set, KHAN/ SMW Standard and Optional product components : Hi-TECH 700BB, Hi-TECH 700BB + Hi-TECH 700BB Hi-TECH 700BB + Standard Accessories Optional Accessories Coolant System Tooling System Air Blower Tool Life Management Door Interlock Tool Kit & Box Air Chuck including Pneumatics Tool Presetter (Automatic) Foot Switch Work Light Control System, SCHUNK/ SMW Tool & Work Counter Hydraulic Unit.4 LCD Display Air Gun - External/ Internal Leveling Bolt & Plate Chip Conveyor & Box (Side type) Transformer Lubrication System Coolant Gun Turnmill Function Including Manual Guide i High Pressure Pump System C-axis (0.001 ) Operation Manual & Parts List - bar/ 15bar/ 70bar Turnmill Holder (Axial/ Radial) Signal Lamp with 2 Colors (R, G) Manual Chuck, 20 U-Drill Holder Spindle Air Curtain Manual Chuck, 24 Wide Type Turret Disk Standard Turret, 12 pos. NC Cooler Lathe-Hwacheon Tool Load Detect Steady Rest Base Set Oil Skimmer (L-HTLD) Tailstock, MT#5 Signal Lamp with Colors (R, G, Y) - Tailstock Body Program Steady Rest Base Set - Tailstock Quill Program Steady Rest Set, KHAN/ SMW Standard and Optional product components : Hi-TECH 850BB, Hi-TECH 850BB + Hi-TECH 850BB Hi-TECH 850BB + Standard Accessories Optional Accessories Door Interlock Tool Holder for Long Boring Bar, 1set Air Blower Tool Life Management Foot Switch Tooling System Air Chuck including Pneumatics Tool Presetter (Automatic) High Pressure Coolant Pump, bar Tool Kit & Box Control System, SCHUNK/ SMW Tool & Work Counter Hydraulic Unit Wide Type Turret Disk Air Gun - External/ Internal Leveling Bolt & Plate Work Light Chip Conveyor & Box (Side type) Transformer Lubrication System.4 LCD Display Coolant Gun Turnmill Function Including Manual Guide i Function of Y-axis (±1mm) C-axis (0.001 ) Operation Manual & Parts List High Pressure Pump System Turnmill Holder (Axial/ Radial) Signal Lamp with 2 Colors (R, G) - 15bar/ 70bar U-Drill Holder Spindle Air Curtain Linear Scale (X/ Z/ Y) Lathe-Hwacheon Tool Load Detect Spindle Cooling System Manual Chuck, 24 (L-HTLD) Standard Turret, 12 pos. Manual Chuck, 28 Tailstock, MT#5 NC Cooler - Tailstock Body Program Oil Skimmer - Tailstock Quill Program Signal Lamp with Colors (R, G, Y) Steady Rest Base Set Steady Rest Set, KHAN/ SMW

18 18 Hwacheon catalog : Hi-TECH 550BB/700BB/700BB + /850BB/850BB + Machine Specifications Capacity ITEM Hi-TECH 550BB 550BB 550BB/MC 550BBL 550BBL/MC Swing over Bed mm (inch) Ø800 (Ø1.50 ) Max. Cutting Diameter mm (inch) Ø50 (Ø2.2 ) Standard Cutting Diameter mm (inch) Ø87 (Ø15.2 ) Ø275 (Ø.8 ) Ø87 (Ø15.2 ) Ø275 (Ø.8 ) Max. Cutting Length (Without Chuck) mm (inch) 1,150 (45.27 ) 2,150 (84.4 ) Chuck Size (Opt.) mm (inch) Air chuck Ø470 (Ø18.5 ) Spindle Type of Spindle Nose ASA A2-15 Max. Spindle Speed rpm 1,500 Through Spindle Hole Diameter mm (inch) Ø185 (Ø7.28 ) Max. Bar Size mm (inch) Ø180 (Ø7.08 ) Spindle Bearing Inner Diameter mm (inch) Ø240 (Ø.45 ) Spindle Motor kw (HP) 7/0 (50/40) Turret Number of Tool Station ea (Opt.: 12) 12 (Opt.: 12) 12 Tool Size (OD x ID) mm (inch) 2 Ø0 ( 1.25 Ø2.5 ) Turret Indexing Time sec / step 0.2 Feed rates Rapid Speed (X / Z) m/min (ipm) 20/24 20/20 Max. Stroke (X / Z) mm (inch) 45/1,150 (1.58 /45.28 ) 45/2,150 (1.58 /84.5 ) Feed Motor (X / Z) kw (HP) 4/7(5.5/.5) Tailstock Quill Dia. mm (inch) Ø120 (Ø4.72 ) Quill Stroke mm (inch) 150 (5.1 ) Quill Taper MT # 5 Turnmill (Opt.) Spindle Motor kw (HP) - 7.5/5.5 (/7.5) - 7.5/5.5 (/7.5) Max. Spindle Speed rpm - 4,000-4,000 Max. Drill / Collet Size mm (inch) - Ø2(Ø1.2 ) /M20 - Ø2(Ø1.2 ) /M20 Min. Index Angle (deg) Tank Capacity Lubrication l (gal) 12(.17) Hydraulic l (gal) 50(1.21) Coolant l (gal) 250(0) 80(0) Power Sources Electrical Power Supply kva 75 Dimension Height mm (inch) 2,400 (4.5 ) 2,450 (.5 ) Floor Space (L x W) mm (inch) 4,50 x 2,70 (180.7 x. ) 5,50 x 2,70 (220.1 x. ) Weight kg(ib),000 (22,04),500 (2,148) 12,500 (27,558) 1,000 (28,0) NC Controller Fanuc 0i-TD

19 Machine Specifications 1 Machine Specifications Capacity ITEM Hi-TECH 700BB/700BB + 700BB 700BB/MC 700BB + 700BB + /MC Swing over Bed mm (inch) Ø00 (Ø5.4 ) Ø00 (Ø5.4 ) Max. Cutting Diameter mm (inch) Ø50 (Ø25.5 ) Ø700 (Ø27.5 ) Standard Cutting Diameter mm (inch) Ø81 (Ø15 ) Ø81 (Ø15 ) Max. Cutting Length (Without Chuck) mm (inch) 2,050 (80.7 ) 2,050 (80.7 ) Chuck Size (Opt.) mm (inch) Air chuck Ø470 (Ø18.5 ) Air chuck Ø0 (Ø24.8 ) Spindle Type of Spindle Nose ASA A2-15 A2-20 Max. Spindle Speed rpm 1,00 1,000 Through Spindle Hole Diameter mm (inch) Ø185 (Ø7.28 ) Ø00 (Ø11.81 ) Max. Bar Size mm (inch) Ø180 (Ø7.08 ) Ø25 (Ø11.1 ) Spindle Bearing Inner Diameter mm (inch) Ø240 (Ø.45 ) Ø0 (Ø14.17 ) Spindle Motor kw (HP) 45/7 (0/50) 45/7 (0/50) Turret Number of Tool Station ea Tool Size (OD x ID) mm (inch) 2 Ø0 ( 1.25 Ø2.5 ) 2 Ø0 ( 1.25 Ø2.5 ) Turret Indexing Time sec / step Feed rates Rapid Speed (X / Z) m/min (ipm) 18/18 18/18 Max. Stroke (X / Z) mm (inch) 0/2,050 (15.1 /81.5 ) 85/2,070 (15.1 /81.5 ) Feed Motor (X / Z) kw (HP) / (8/8) / (8/8) Tailstock Quill Dia. mm (inch) Ø150 (Ø5. ) Ø150 (Ø5. ) Quill Stroke mm (inch) 150 (5.1 ) 150 (5. ) Quill Taper MT # 5 # 5 Turnmill (Opt.) Spindle Motor kw (HP) - 7.5/5.5 (/7.5) - 7.5/5.5 (/7.5) Max. Spindle Speed rpm - 2,000-2,000 Max. Drill / Collet Size mm (inch) - Ø2(Ø1.2 ) /M20 - Ø50 (Ø2 ) / M24 Min. Index Angle (deg) Tank Capacity Lubrication l (gal) 12 (.17) 12 (.2) Hydraulic l (gal) 50 (1.21) 50 (1.2) Coolant l (gal) 00 (7) 00 (7) Power Sources Electrical Power Supply kva Dimension Height mm (inch) 2,55 (.8 ) 2,55 (.8 ) Floor Space (L x W) mm (inch) 5,80x2,20 (211. x1.4 ) 5,80x2,20 (211. x1.4 ) Weight kg(ib) 15,500 (4,172) 15,00 (4,2) 15,850 (4,4) 15,50 (5,14) NC Controller Fanuc 0i-TD

20 20 Hwacheon catalog : Hi-TECH 550BB/700BB/700BB + /850BB/850BB + Machine Specifications Hi-TECH 850BB/850BB + ITEM 850BB 850BB /MC 850BB /YMC 850BBL 850BBL /MC 850BBL /YMC 850BB + 850BB + /MC 850BB + /YMC 850BB + L 850BB+ L /MC 850BB + L /YMC Capacity Swing Over Bed mm (inch) Ø1,050 (Ø41.4 ) Ø1,050 (Ø41.4 ) Max. Cutting Diameter (ØD x L) mm (inch) Ø20 (Ø.22 ) [85 (15.1 )] Ø20 (Ø.22 ) [85 (15.1 )] Standard Cutting Diameter Max. Cutting length (without chuck) mm (inch) Ø80 (Ø14. ) Ø80 (Ø14. ) mm (inch) 2,50 (4. ),50 (14.7 ) 2,50 (4. ),50 (14.7 ) Chuck Size (Opt.) mm (inch) Air Chuck Ø0 (Ø24.8 ) Air Chuck Ø850 (Ø.5 ) Spindle Type of Spindle Nose ASA A2-20 A2-20 Max. Spindle Speed rpm 1, Through Spindle Hole Diameter mm (inch) Ø00 (Ø11.81 ) Ø75 (Ø14.7 ) Max. Bar Size mm (inch) Ø25 (Ø11.1 ) Ø70 (Ø14.5 ) Spindle Bearing Inner Diameter mm (inch) Ø0 (Ø14.17 ) Ø440 (Ø17.2 ) Spindle Motor kw (HP) 45 / 7 (0 / 50) 45 / 7 (0 / 50) Turret Number of Tool Station ea Tool Size (OD x ID) mm (inch) 2 Ø 80 ( 1.25 Ø ) 2 Ø 80 ( 1.25 Ø ) Turret Indexing Time sec / step Feed rates Rapid Speed (X / Z / Y) m/min (ipm) /12/- (.7/472.4/-) /12/ (.7/472.4 /.7) //- (.7/.7/-) // (.7/.7 /.7) /12/- (.7/472.4/-) /12/ (.7/472.4 /.7) //- (.7/.7/-) // (.7/.7 /.7) Max. Stroke (X / Z / Y) mm (inch) 485/2,50/- (1.1 /4. /-) 485/2,50/220 (1.1 /4. /8. ) 485/,50/- (1.1 /14.7 /-) 485/,50/220 (1.1 /14.7 /8. ) 485/2,50/- (1.1 /4. /-) 485/2,50/220 (1.1 /14.7 /8. ) 485/,50/- (1.1 /14.7 /-) 485/,50/220 (1.1 /14.7 /8. ) Feed Motor (X / Z / Y) kw (HP) //- (8/8/-) //7 (8/8/.) //- (8/8/-) //7 (8/8/.) //- (8/8/-) //7 (8/8/.) //- (8/8/-) //7 (8/8/.) Tailstock Quill Dia. mm (inch) Ø10 (Ø. ) Ø10 (Ø. ) Quill Stroke mm (inch) 150 (5.1 ) 150 (5.1 ) Quill Taper MT # # Turnmill (Opt.) Spindle Motor kw (HP) - 11/7.5 (15/) - 11/7.5 (15/) - 11/7.5 (15/) - 11/7.5 (15/) Max. Spindle Speed rpm - 2,500-2,500-2,500-2,500 Max. Drill / Collet Size mm (inch) - Ø2 (Ø1.25 ) / ER50 - Ø2 (Ø1.25 ) / ER50 - Ø2 (Ø1.25 ) / ER50 - Ø2 (Ø1.25 ) / ER50 Min. Index Angle (deg) Tank Capacity Lubrication l (gal) 12(.7) 12(.7) Hydraulic l (gal) 50(1) 50(1) Coolant l (gal) 400 (5.7) 550 (145.) 400 (5.7) 550 (145.) Power Sources Electrical Power Supply kva Dimension Height mm (inch),020 (118. ),020 (118. ) Floor Space (L x W) mm (inch),80 x,00 ( x 11. ),80 x,180 ( x ) 7,80 x,00 (0.45 x 11. ) 7,80 x,180 (0.45 x ),80 x,00 ( x 11. ),80 x,180 ( x ) 7,80 x,00 (0.45 x 11. ) 7,80 x,180 (0.45 x ) Weight kg(ib) 18,000 (,8) 18,500 (40,785) 1,500 (42,0) 2,000 (50,70) 2,500 (51,808) 24,500 (54,01) 18,500 (40,785) 1,000 (41,887) 20,000 (44,02) 2,500 (51,808) 24,000 (52,) 25,000 (55,11) NC Controller Fanuc 0i-TD

21 Machine Specifications 21 NC Specifications [Fanuc0i-TD] ITEM SPECIFICATION STD MC YMC Controlled axis Controlled axis (Cs axis) 2-Axes 2-Axes -Axes 4-Axes Simultaneously controlled axes 2-Axes 2-Axes -Axes 4-Axes - : Not available S : Standard O : Option ITEM SPECIFICATION STD MC YMC Program input Tape code EIA RS244 / ISO840 S S S Optional block skip 1ea S S S Least input increment 0.001mm, 0.001deg, inch S S S Program number O4-Digits S S S Sequence number N5-Digits S S S Least input increment 1/ mm, deg, inch O O O Decimal point programming S S S Coordinate system setting G50 S S S inch/metric conversion G20, G21 S S S Stored stroke check 1 S S S Stored stroke check 2, S S S Mirror image S S S Backlash compensation S S S Operation Automatic & MDI operation S S S Program number search S S S Sequence number search S S S Dry run, single block S S S Manual handle feed 1Unit S S S Manual handle feed rate x1, x, x0 S S S Interpolation function Posit ioning G00 S S S Linear interpolation G01 S S S Circular interpolation G02, G0 S S S Dwell (Per seconds) G04 S S S Polar coordinate interpolation G12.1/G1.1 - S S Cylindrical interpolation G7.1 - S S Threading / Continuous threading G2 S S S Multiple threading / Threading Retract S S S Variable lead threading G4 S S S Reference position return 1st G28 S S S Reference position return check G27 S S S 2,,4th reference position return G0 S S S Feed function Rapid traverse override F0, F25, F50, F0 S S S Feed per minute (mm/min) G8 S S S Feed per revolution (mm/rev) G S S S Rapid traverse bell-shaped acceleration/deceleration S S S Feedrate override % S S S Jog feed override 0-1,20 mm/min S S S Tool function / compensation Tool function T4-digits S S S Coordinate system shift S S S Workpiece coordinate system G54-G5 S S S Workpiece coordinate system G2.1 preset S S S Direct drawing dimension programming S S S G code system A S S S Programmable data input G S S S Sub program call Folds Nested S S S Custom macro B S S S Addition of custom macro -common variables #0-#1, #500-# S S S Canned cycles S S S Multiple repetitive cycle S S S Multiple repetitive cycleⅡ S S S Canned cycles for drilling S S S Manual guide i S S S Spindle speed function Constant surface speed control G / G7 S S S Spindle override % S S S Spindle orientation S S S Ripid tapping O S S Editing operation Part program storage length 1,280m (512 kb) S S S Number of register able programs 400ea S S S Background editing S S S Extended part program editing S S S Play back S S S Operation / Display Clock function S S S Self-diagnosis function S S S Alarm history display S S S Help function S S S Run hour and parts count display S S S Graphic function S S S Tool offset pairs 4 pairs S S S Tool nose radius compensation S S S Tool geometry / wear compensation S S S Tool life management O O O Multi-language display Korean, English, German, French, Italian, Chinese, Spanish, Portuguese, Polish, Hungarian, Swedish, Russian S S S Automatic tool offset Tool presetter option is required O O O Data input/output Direct input tool offset value measured B Tool presetter option is required O O O Reader / Puncher interface CH1 RS22C S S S Reader / Puncher interface CH2 RS22C S S S Others Ethernet interface S S S Display unit.4" Color LCD S S S Memory card interface S S S YMC: Hi-TECH 850BB/ Hi-TECH 850BB +

22 Hwacheon Global Network Hwacheon Headquarter Hwacheon America Hwacheon Europe Hwacheon Asia Please call us for product inquiries. The product design and specifications may change without prior notice. Read the operation manual carefully and thoroughly before operating the product, and always follow the safety instructions and warnings labels attached on the surfaces of the machines. HEAD OFFICE HWACHEON MACHINE TOOL CO., LTD 7-1, JANGDEOK-DONG GWANGSAN-GU, GWANGJU, KOREA TEL: FAX: SEOUL OFFICE 22-7, BANGBAE-DONG, SEOCHO, SEOUL, KOREA TEL: FAX: USA HWACHEON MACHINERY AMERICA, INC. 50, LAKEVIEW PARKWAY VERNON HILLS, IL001, USA TEL: FAX: SINGAPORE HWACHEON ASIA PACIFIC PTE. LTD. 21 BUKIT BATOK CRESCENT, #08-7 WCEGA TOWER SINGAPORE 5805 TEL: FAX: GERMANY HWACHEON MACHINERY EUROPE GMBH JOSEF-BAUMANN STR. 25, 44805, BOCHUM, GERMANY TEL: FAX: HC-T140-R