Valmet Oyj Keilasatama 5, Espoo, Finland and the sites as mentioned in the appendix accompanying this certificate
|
|
|
- Gervase Butler
- 5 years ago
- Views:
Transcription
1 Certificate No: AHSO-FIN-FINAS Initial certification date: 20 December 2018 Valid: 20 December March 2021 This is to certify that the management system of Valmet Oyj Keilasatama 5, Espoo, Finland and the sites as mentioned in the appendix accompanying this certificate has been found to conform to the Occupational Health and Safety Management System standard: OHSAS 18001:2007 This certificate is valid for the following scope: Development and supply of process technologies, automation and services for the pulp, paper, energy and other process industries Place and date: Espoo, 20 December 2018 For the issuing office: DNV GL Business Assurance Finland Oy Ab Kimmo Haarala Management Representative
2 Appendix to Certificate Valmet Oyj Locations included in the certification are as follows: Site Country Site Address Site Scope Brazil Rua Pedro de Alcântara Meira, nº Bairro Fazenda Velha Araucária Paraná, Brazil No.1 Mugu Road, Yonghe Economic Zone, Guangzhou Economic&Technological Development District Guangdong, 688, Baofeng Road, Xuhang Town, Jiading District Shanghai, Jiading Section B, 168 Fute Road (East No. 1), Waigaoqiao Free Trade Zone Shanghai, Waigaoqiao No. 1 Xi Er Dao, Bonded area, Airport Free Trade Zone, C Tianjin, 2, Hanjiang Road, Wuxi New District Wuxi, Jiangsu, No 4, 4th A Fang Road, Xi'an, Shaanxi, 43, Minxiang Road, Zibo New & Hi-tech Industrial Development Zon Zibo, Shandong, spare part deliveries, customer support and logistics center of plants, process automation systems and services for pulp, paper, tissue, board, energy, fiberboard and other spare part deliveries and customer support of components and services for pulp, paper, tissue, energy, board, mining, marine and other site operations, spare part deliveries and casting of machines, components and services for pulp, paper, board, tissue, energy, marine and other Sales, production, spare part deliveries and procurement of components and services for pulp, paper, tissue, board other Production and customer support of fabrics and components for pulp, paper, tissue, energy, board, mining and other spare part deliveries, customer support and logistics center of components and services, for pulp, paper, tissue, energy, board, mining, marine and other Engineering, procurement, production, site operation sand spare part deliveries of components for pulp, paper, board, tissue and other spare part deliveries and customer support, of components and services for pulp, paper, tissue, energy, board, mining, marine and other Page 2 of 6
3 Denmark Dirch Passers Allé 76 DK-2200 Frederiksberg Denmark engineering, procurement, spare part plants, machines, components and services for pulp, paper, tissue, board, energy and other Finland Keilasatama 5, Espoo, Finland Head office functions, sales, project management and customer support of plants, production lines, machines, components, process automation systems, fabrics, services, remote solutions for pulp, paper, tissue, energy, board, fiberboard, mining, marine and other Finland Kuitutie Inkeroinen, Finland Finland Juankoskentie Juankoski, Finland Finland Wärtsilänkatu 100 FI Järvenpää, Finland Finland Kehräämöntie Kajaani, Finland Finland Metallitie Lapua, Finland Finland Simpsiöntie 7, Lapua, Finland Finland Karjarannantie Pori, Finland Sales, project management and pilot plant operations for pulp, paper and board procurement, production, workshop operations, site operations, spare part deliveries, customer support, and castin of production lines, machines, components and services for pulp, paper, board, energy and other procurement, site operations and spare part deliveries of machines, components and services for pulp, paper, board and other Research & development, sales, logistics center of process automation systems and services for pulp, paper, tissue, energy, board and other casting of plants, production lines, machines, components, services and remote solutions for pulp, paper, tissue, marine and other industries Engineering, procurement, production, site operations, spare part deliveris and customer support of plants, production lines, machines, components, services for pulp, paper, energy, board procurement, site operations, workshop operations and spare part deliveries of machines, components and services for pulp and energy Page 3 of 6
4 Finland Raisionkaari 60, Raisio, Finland Finland Automiehenkatu Tampere, Finland Finland Lentokentänkatu Tampere, Finland Finland Yrittäjänkatu Tampere, Finland Finland Sammontie Ulvila, Finland Finland Teollisuustie 1, Valkeakoski, Finland Finland Vanha Porvoontie Vantaa, Finland Finland Metallikatu Kuvansi, Finland Germany Marienburgstrasse Darmstadt, Germany engineering, site operations, spare part deliveries, customer support and logistic center of process automation systems and services for pulp, paper, tissue, energy, board, and other industries Sales, engineering, procurement, production, site operations, workshop operations, spare part deliveries and customer support of machines, components, services for pulp and energy logistics center of plants, production lines, machines, components, process automation systems, remote solutions and services for pulp, paper, tissue, energy, board, marine and other Sales, engineering, customer support, procurement and production of components for paper, board and pulp deliveries, and customer support of process automation systems and services for pulp, paper and energy industries Research & development, sales, engineering, procurement, spare part deliveries, customer support, casting and production of components for pulp, paper and board industry. process automation systems, services for pulp, paper and energy process automation systems, services for pulp, paper and energy fabrics and services for pulp, paper, tissue, energy, board, fiberboard and other Page 4 of 6
5 India Indonesia Central Square 1. Fourth Floor, South Wing, CIPET Road Thiru-vi-ka Industrial Estate Guindy Chennai, India Greenland International Industrial Center (GIIC) Kawasan Industri Terpadu Indonesia (KITIC ) - Jl. Anggrek VIII Plot.71, Cikarang, Bekasi 17520, Indonesia Italy Via A. Gregorcic 46, Gorizia, Italy Italy Via G.Leopardi Grandate (Como) Italy Portugal Estrada de S. João Ovar, Portugal Sweden Kolargatan Borlange, Sweden Sweden Regnbågsgatan Gothenburg Sweden Sweden Järnverkets Industriområde Hagfors, Sweden engineering, procurement, site operations, spare part deliveries and customer support of plants, production lines, machines, components and services for pulp, paper, tissue, board, energy and other workshop operations, spare part machines, components, process automation systems, services and remote solutions for pulp, paper, tissue, energy and other site operations and customer support of machines and components for paper, board, tissue and other engineering, procurement, site operations and customer support of machines and components for paper, board, tissue and other Research & development, sales, customer support, production and spare part deliveries of fabrics and components for pulp, paper, tissue, energy, board, mining and other Workshop operations, customer support and services of components for paper industry. logistics center of plants, production lines, machines, components, process automation systems, services and remote solutions for pulp and energy casting of plants, production lines, machines, components, services and remote solutions for pulp, paper, tissue, marine and other Page 5 of 6
6 Sweden Axel Johnsons väg Karlstad, Sweden Sweden Vretenvägen Solna, Sweden Sweden Gustaf Gidlöfs Väg 1,2,3 and 4, Sundsvall, Sweden USA 3440 Toringdon Way, Suite 300 Charlotte, NC, USA casting of plants, production lines, machines, components, services and remote solutions for pulp, paper, tissue, marine and other spare part deliveries, customer support, services, remote solutions for pulp, paper, tissue, board and fiberboard logistics center of plants, production lines, machines, components, process automation systems, services and remote solutions for pulp, energy, marine and other engineering, procurement, site operations, spare part deliveries, customer support and services of plants, production lines, machines, components for pulp, paper, tissue, energy, board, fiberboard, and other Page 6 of 6
Valmet Oyj Keilasatama 5, Espoo, Finland and the sites as mentioned in the appendix accompanying this certificate
Certificate No: 281021-2018-AE-FIN-FINAS Initial certification date: 20 December 2018 Valid: 20 December 2018-20 December 2021 This is to certify that the management system of Valmet Oyj Keilasatama 5,
Valmet board and paper business. Mikko Osara Vice President Head of Board and Paper Mills business unit March 13, 2018
Valmet board and paper business Mikko Osara Vice President Head of Board and Paper Mills business unit March 13, 2018 Content Papermaking process in a nutshell Board and paper markets Competitors Trends
Low voltage switchgear
Low voltage switchgear Sivacon S8 and 8PT Withdrawable core structure designed for demanding applications and international markets. SAT8 PU0 Main exchange system for demanding fixed output, industrial
Telecommunication & Broadcasting Produced by IAR Team Focus Technology Co., Ltd.
Telecommunication & Broadcasting 2013.6 Produced by IAR Team Focus Technology Co., Ltd. Contents 1. China Telecommunication & Broadcasting Industry Analysis Report from Jan. to March 2013...5 1.1. China
Valmet Paper Technology Center The proving grounds for improved efficiency
Valmet Paper Technology Center The proving grounds for improved efficiency Valmet Paper Technology Center The proving grounds for improved efficiency Valmet Paper Technology Center provides the world s
DECLARATION OF CONFORMITY MARINE EQUIPMENT DIRECTIVE (MED)
Hempel A/S Lundtoftegårdsvej 91 DK-2800 Kgs. Lyngby Denmark hempel.com Tel: +45 45933800 Dir: +4545273842 Fax: +4545885518 Email: NWH@hempel.com DECLARATION OF CONFORMITY MARINE EQUIPMENT DIRECTIVE (MED)
Partnership Between Professionals
Partnership Between Professionals CONTRACT MANUFACTURING MSK SETTING THE STANDARD FOR CONTRACT MANUFACTURING MATERIAL HANDLING FOREST COST EFFICIENCY ENGINEERING INDUSTRIAL RELIABLE OUTSTANDING SUPPLY
Frame through-beam sensors
Frame through-beam sensors Features Wide range of sizes: passage sizes from 25 x 23 mm to 300 x 397.5 mm Metal housings Integrated evaluation unit Connection by means of connector Degree of protection
Simplifying DC-DC Converter Characterization using a 2600B System SourceMeter SMU Instrument and MSO/DPO5000 or DPO7000 Series Scope APPLICATION NOTE
Simplifying DC-DC Characterization using a 2600B System SourceMeter SMU Instrument and MSO/DPO5000 or DPO7000 Series Scope Introduction DC-DC converters are widely used electronic components that convert
OVERVIEW MANAGEMENT BOARD INTRO EMPLOYEES WORLDWIDE HISTORY RANGE OF BUSINESS MARKETS & SOLUTIONS SALES. Navigation
WELCOME TO MOBA OVERVIEW INTRO HISTORY MANAGEMENT BOARD WORLDWIDE EMPLOYEES SALES RANGE OF BUSINESS KNOW-HOW PRODUCTS MARKETS & SOLUTIONS INTRO +40 YEARS OF EXPERIENCE IN MOBILE AUTOMATION Made in Germany
Hanyoung Industry - Global Company Taking Korea to the World Hanyoung Industrial.Co.,Ltd.
Hanyoung Industry - Global Company Taking Korea to the World Hanyoung Industrial.Co.,Ltd. Global HANYOUNG Industry Hanyoung Industry, small but globally powerful Contents MESSAGE FROM THE CEO Hanyoung
The management system of the organization(s) and locations mentioned on the addendum belonging to:
CERTIFICATE Number: 2090418 The management system of the organization(s) and locations mentioned on the addendum belonging to: The Netherlands including the implementation meets the requirements of the
TRUE STORIES. KAM HING International Holding Ltd.: A preferred partner of International Fashion Apparel Brand operators
TRUE STORIES KAM HING International Holding Ltd.: A preferred partner of International Fashion Apparel Brand operators KAM HING Company s core business: Vertically integrated operations, which include
MIC5528. High Performance 500 ma LDO in Thin and Extra Thin DFN Packages. General Description. Features. Applications.
High Performance 500 ma LDO in Thin and Extra Thin DFN Packages Features General Description Applications Package Types Typical Application Circuit Functional Block Diagram 1.0 ELECTRICAL CHARACTERISTICS
The leading Plate Service Centres in Europe
The leading Plate Service Centres in Europe Total solutions in stainless steel The Outokumpu Plate Service Centre Group Outokumpu is the leading supplier of Stainless Steel sheets & plates in Europe. Through
Radiofrequency Ablation Needle Electrodes. Procedural Algorithms and Lesion Geometry
Radiofrequency Ablation Needle Electrodes Procedural Algorithms and Lesion Geometry Radiofrequency Ablation Needle Electrodes O R D E R I N G I N F O R M A T I O N Array Cannula UPN Order Number Diameter
Sofa Produced by IAR Team Focus Technology Co., Ltd.
Sofa 2013.07 Produced by IAR Team Focus Technology Co., Ltd. Contents 1. Industry Overview... 3 2. China Sofa Industry Export Data Analysis from Jan. to May in 2013... 5 2.1. China Bamboo or Rattan Seats
KONEPAJA HÄKKINEN GROUP
KONEPAJA HÄKKINEN GROUP The Konepaja Häkkinen Group is a Finnish-owned engineering workshop, which was founded in 1980. The Group has production facilities in four locations: Raisio and Turku, as well
Through-beam ring sensors
Throughbeam ring sensors Features Wide range of sizes: ring diameters of 10, 15 and 20 mm Metal housings Separate evaluation unit Connection by means of S8 connector Degree of protection IP 63 Adjustable
Olympus High Res Shot Raw File Photoshop Plug-in User's Manual
Olympus High Res Shot Raw File Photoshop Plug-in User's Manual Introduction Thank you for using this Olympus product. The "Olympus High Res Shot Raw File Photoshop Plug-in" processes High Res Shot raw
ABB Oy, KPM. Sakeusmittaukset paperikoneen massanvalmistuksessa
ABB Oy, KPM Sakeusmittaukset paperikoneen massanvalmistuksessa KPM Kajaani Process Measurements Ltd. KPM was established 2001 KPM was acquired by ABB on 2011, now Worldwide Sales and Service Network Researh
Product Introduction. MF2400C Series. Microwave Frequency Counter
Product Introduction MF2400C Series Microwave Frequency Counter MF2412/13/14C Microwave Frequency Counter Product Introduction September 2007 Anritsu Corporation Version 1.00 Slide 1 MF2400C Microwave
Product Introduction. MF2400C Series. Microwave Frequency Counter
Product Introduction MF2400C Series Microwave Frequency Counter MF2412/13/14C Microwave Frequency Counter Product Introduction September 2007 Anritsu Corporation Version 1.00 Slide 1 MF2400C Microwave
Measurement Solutions for Tubes and Bars
Measurement Solutions for Tubes and Bars Laser based measurement systems for the steel industry Measurement solutions for tubes and bars We measure your way to perfection LIMAB Your partner for in-line
2015 NATIONSTAR. DA LEDs For Display Applications STOCK CODE:
STOCK CODE: 002449 1 NATIONSTAR DA LEDs For Display Applications FOSHAN NATIONSTAR OPTOELECTRONICS CO.,LTD Add:No.1 South Huabao Road, Chancheng District,Foshan, Guangdong,P.R.China Tel: 6772100231 EXT,
D L D S. Dalian Dashan Group
大连大山集团 Dalian Dashan Group INTRODUCTION OF DLDS GROUP DLDS Group is one of the biggest producers and suppliers of crystallizer located in China. It is a joint venture with KME, the world-renowned renowned
Reijo Kiskola (b. 1954)
Reijo Kiskola (b. 1954) Dairy engineer CEO (acting) and Chairman of the Board of HKScan since 27 November 2018 -, Member of HKScan Board 2018 - Arla Foods Amba, European Zone, Member of Leadership Team
Forestal y Papelera Concepción found the holy grail of softness. Chile
Forestal y Papelera Concepción found the holy grail of softness Chile 2 The Advantage NTT machine is designed to swing between production of plain and textured tissue. The secret behind this is the belt.
Application Note MX860803A/MX860903A. cdma Measurement Software. MS8608A/MS8609A Digital Mobile Radio Transmitter Tester
Application Note MX860803A/MX860903A cdma Measurement Software MS8608A/MS8609A Digital Mobile Radio Transmitter Tester MX860803A/MX860903A cdma Measurement Software Application Note April 2006 Anritsu
PÖYRY INSIGHT. World Paper Markets up to 2030
PÖYRY INSIGHT World Paper Markets up to 2030 Paper market outlook through 2030 Since the early-1980s, Pöyry has published global, long-term paper market forecasts regularly. Our new outlook is the 12th
Front Digital page Strategy and leadership
Front Digital page Strategy and leadership Who am I? Prof. Dr. Bob de Wit What concerns me? - How to best lead a firm - How to design the strategy process - How to best govern a country - How to adapt
CLUSTER ARREDO E SISTEMA CASA S.r.l. Consortile
Certificate No: 2017-SKM-PEFC-175 Initial certification date: 11 April,2013 Validity end date: 10 April,2022 The validity of this certificate shall be verified on www.pefc.org. This is to certify that
Verifying Power Supply Sequencing with an 8-Channel Oscilloscope APPLICATION NOTE
Verifying Power Supply Sequencing with an 8-Channel Oscilloscope Introduction In systems that rely on multiple power rails, power-on sequencing and power-off sequencing can be critical. If the power supplies
DWPI Start Date A Examined granted patents (1975 only) 6 February 1975
Derwent World Patents Index Coverage Summary Argentina (AR) A Examined granted patents (1975 only) 6 February 1975 Australia (AU) A OPI document (standard and petty patent applications) 4 January 1983
STAINLESS STEEL STAINLESS STEEL MANUFACTURING STAINLESS STEEL TRADING BRIGHT BARS WIRES PRECISION COMPONENTS
STAINLESS STEEL BRIGHT BARS WIRES PRECISION COMPONENTS BHANSALI is diversified business group with interests in Stainless Steel, Textiles and ABS Plastics. Under the dynamic leadership of Mr. Pukhraj Bhansali
EXECUTIVE SUMMARY. Robot sales to the fabricated metal products industry, the chemical industry and the food industry increased substantially.
2006 World Robot Market EXECUTIVE SUMMARY Total world-wide sales: 112,200 units, down 11% on 2005 World total stock of operational industrial robots: 951,000 units,3% greater than 2005 The world market
Form Talysurf i-series. A high resolution instrument range offering automated surface and contour inspection
Form Talysurf i-series A high resolution instrument range offering automated surface and contour inspection 1 The Form Talysurf i-series A high range high resolution system for contour and surface finish
Performing Safe Operating Area Analysis on MOSFETs and Other Switching Devices with an Oscilloscope APPLICATION NOTE
Performing Safe Operating Area Analysis on MOSFETs and Other Switching Devices with an Oscilloscope Line Gate Drain Neutral Ground Source Gate Drive FIGURE 1. Simplified switch mode power supply switching
48 RobecoSAM The Sustainability Yearbook RobecoSAM Industry Leaders 2016
48 RobecoSAM The Yearbook 0 RobecoSAM 0 RobecoSAM 0 Company Country Abbott Laboratories health Care Equipment & Supplies united States Agilent Technologies Inc life Sciences Tools & Services united States
Company Profile Dieffenbacher Group
Company Profile Group Experience and Innovation Wolf-Gerd, CEO is an internationally active group of companies that develops and manufactures press systems and complete production systems for the wood
Performance-Based Safety Regulation
Performance-Based Safety Regulation Peter Bjerager, DNV GL National Academy of Sciences, 15 April 2016 1 SAFER, SMARTER, GREENER DNV GL in brief We classify, certify, verify and test against regulatory
WORLD LEADERS IN LINEAR MOTION
HepcoMotion Lower Moor Business Park Tiverton Way Tiverton Devon England EX16 6TG Tel: +44 (0)1884 257000 Fax: +44 (0)1884 243500 E-mail: sales@hepcomotion.com Corp Broch UK 01 2015 Hepco Slide Systems
Through Cost Effective Procurement Strategy. Gu Hong, COOEC April, 2011
Managing Successful Offshore Modularized Fabrication Through Cost Effective Procurement Strategy Gu Hong, COOEC April, 2011 CONTENTS Offshore Project Management Need Analysis Sourcing in China Procurement
General Certificate of Conformity
3115 Airway Avenue Costa Mesa, CA 92626 USA General Certificate of Conformity Date Issued: 7/11/16 Revised: 7/25/16 2014 Second Street, Selma CA 93662 Phone: 559-891-9888 / Fax: 559-891-9709 Email: info@usa-ppi.com
IFIP 13.6 HWID Human Work Interaction Design
IFIP 13.6 HWID Human Work Interaction Design Wednesday, March 5th 2015 IFIP TC13 Open Symposium on HCI, Tampere, Finland Pedro Campos, Madeira-ITI, Portugal Torkil Clemmensen, CBS, Denmark IFIP 13.6 HWID
Technical Data Sheet Effective: 03/4/16 Supersedes: 1/11/05
Division 3M 55045 Superfast Plastic Adhesive 1) Part Numbers 55045 Superfast plastic adhesive 50ml cartridges 2) Description and end uses 3M Automix 55045 Superfast Plastic Adhesive is a very fast setting
Table of Contents Executive Summary 29
Contents Table of Contents Executive Summary 29 Section 1: Introduction 33 Section 2: World 37 2.1.1. Main consumers 37 2.1.2. Main producers 2015 and 2016 39 2.1.3. Main importers 2015 and 2016 40 2.1.4.
Certificate of Approval
Certificate of Approval This is to certify that the Management System of: Austin Technology & Manufacturing Center, 3501 Ed Bluestein Boulevard, Austin, TX, 78736, USA, United States has been approved
Certificate of Approval
Certificate of Approval This is to certify that the Management System of: NXP Semiconductor Inc. 10, Jing 5th Road, N.E.P.Z, Kaohsiung 81170, Taiwan has been approved by LRQA to the following standards:
Automated Frequency Response Measurement with AFG31000, MDO3000 and TekBench Instrument Control Software APPLICATION NOTE
Automated Frequency Response Measurement with AFG31000, MDO3000 and TekBench Instrument Control Software Introduction For undergraduate students in colleges and universities, frequency response testing
Digitalization as source of growth and competitiveness Reflections around manufacturing industries. Tomas Hedenborg, CEO, Fastems Oy Ab 11.2.
Digitalization as source of growth and competitiveness Reflections around manufacturing industries Tomas Hedenborg, CEO, Fastems Oy Ab 11.2.2014 About used terminology Industrial Internet, Wikipedia (teollinen
Certificate of Approval
Certificate of Approval This is to certify that the Management System of: NXP Manufacturing (Thailand) Ltd., 303 Moo 3 Chaengwattana Rd., Bangkok, 10210, Thailand has been approved by LRQA to the following
3GPP LTE FDD Performance Requirement
Application Note 3GPP LTE FDD Performance Requirement MG3700A Vector Signal Generator MG3700A Vector Signal Generator 3GPP LTE FDD Performance Requirement (TS36.141 v8.3.0) May 2010 Anritsu Corporation
SOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-27269-2 Edition 1 and nat. amdt 1 ISO 7211-2:1984 Edition 1 Any reference to SABS ISO 7211-2 is deemed to be a reference to this standard (Government Notice No. 1373 of 8 November 2002)
Simplifying FET Testing with 2600B System SourceMeter SMU Instruments APPLICATION NOTE
Simplifying FET Testing with 2600B System SourceMeter SMU Instruments Introduction Field effect transistors (FETs) are important semiconductor devices with many applications because they are fundamental
TECHNOLOGY VISION 2017 IN 60 SECONDS
TECHNOLOGY VISION 2017 IN 60 SECONDS GET THE ESSENTIALS THE BIG READ SHORT ON TIME? VIEW HIGHLIGHTS 5 MIN READ VIEW FULL REPORT 45 MIN READ VIEW SHORT REPORT 15 MIN READ OVERVIEW #TECHV1SION2017 2017 TREND
EU Ecolabel EMAS Environmental Technology Verification (ETV) State-of-play and evaluations
EU Ecolabel EMAS Environmental Technology Verification (ETV) State-of-play and evaluations Pierre Henry DG Environment B1 3 instruments of Circular Economy action plan Improving the efficiency and uptake
Welcome to the IFR Press Conference 30 August 2012, Taipei
Welcome to the IFR Press Conference 3 August 212, Taipei Continued success of the robotics industry Welcome by IFR President Dr. Shinsuke Sakakibara Presentation of the results of World Robotics 212 Industrial
Introducing Expleo Through the Lens
Introducing Expleo Through the Lens FEBRUARY 2019 A new breed of technology partner A trusted partner for end-to-end, integrated engineering, quality services and management consulting for digital transformation
Market leader in consistency control. Metso Blade Consistency Transmitter
Market leader in consistency control Metso Blade Consistency Transmitter Our experience shows With over fifty years experience and more than 65 000 blade consistency transmitters installed, Metso is the
Acoustic claddings and shrouds for power plants and other industries
Acoustic claddings and shrouds for power plants and other industries www.bbm-akustik.de BBM Akustik Technologie Acoustic claddings and shrouds for power plants and other industries Acoustic claddings and
TEST REPORT IEC Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1 Information technology equipment Safety Part 1: General requirements Report Number.... : 15081717 002 Date of issue... : 2016-09-29
A 5,000-square-meter surface. 45 employees
2 3 A 5,000-square-meter surface 45 employees A leading company for 25 years Gimatic was founded in 1985 by three partners who created a dynamic reality that has always paid attention to the market developments
Preface... Acknowledgments... Glossary Introduction Management Systems and the Management of Chemical Process Safety...
Preface... Acknowledgments... Glossary... xi xiii xv 1. Introduction... 1 1.1 Process Safety Management Activities of the Center for Chemical Process Safety (CCPS)... 1 1.2 Definition of "Process Safety
WOODWORKING TECHNOLOGY IN EUROPE: HIGHLIGHTS European Federation of Woodworking Technology Manufacturers
European Federation of Woodworking Technology Manufacturers ADVANCED ECONOMIES - GDP % GROWTH RATE 2017 8,0 7,0 6,0 5,0 4,0 3,0 2,0 1,0 0,0 Ireland Malta Slovenia Estonia Latvia Czech Republic Cyprus
Using the Model 4225-RPM Remote Amplifier/ Switch to Automate Switching Between DC I-V, C-V, and Pulsed I-V Measurements APPLICATION NOTE
Using the Model 4225-RPM Remote Amplifier/ Switch to Automate Switching Between DC I-V, C-V, and Pulsed I-V Measurements Characterizing a device, material, or process electrically often requires performing
EVERY SUCCESS STORY BEGINS WITH QUESTIONS... DATWYLER FOR YOUR FUTURE SUCCESS.
DATWYLER FOR YOUR FUTURE SUCCESS. EVERY SUCCESS STORY BEGINS WITH QUESTIONS... The name Datwyler stands for excellence in sealing solutions. But, it also stands for creativity and drive, dependability
Switch. Global Creative Partner
Switch Global Creative Partner 02 We will try our best to become a Global Leading Company DAESUNG DAESUNG Switch System Daesung Electric has been developing and producing switches, relays, and automotive
MXG X-Series Signal Generator N5183B Microwave Analog
MXG X-Series Signal Generator N5183B Microwave Analog Configuration Guide This configuration guide will help you determine which performance, software applications, accessories, and services to include
Trouble-shooting Radio Links in Unlicensed Frequency Bands TUTORIAL
Trouble-shooting Radio Links in Unlicensed Frequency Bands TUTORIAL TUTORIAL With the Internet of Things comes the Interference of Things Over the past decade there has been a dramatic increase in the
Front Digital page Strategy and Leadership
Front Digital page Strategy and Leadership Who am I? Prof. Dr. Bob de Wit What concerns me? - How to best lead a firm - How to design the strategy process - How to best govern a country - How to adapt
BenchTop Extraction Arms with unbeatable flexibility
BenchTop Extraction Arms with unbeatable flexibility A new generation of BenchTop extraction arms with unbeatable flexibility Nederman introduces a new generation of BenchTop arms the FX, FX and FX. These
Chem & Bio non-proliferation
Chem & Bio non-proliferation Workshop on the Export Control of Dual-use Materials and Technologies in GUAM Countries Kyiv, Ukraine, 14 March 2018 Independent Arms Control Consultant Circe poisoning the
Power Measurement and Analysis Software
Power Measurement and Analysis Software TPS2PWR1 Data Sheet Features & Benefits Improve Efficiency of Power Designs with Switching-loss Measurements including Turn-on, Turn-off, and Conduction Losses Reduce
(3) How does one obtain patent protection?
Patenting in Kenya (1) Introduction A patent gives the owner the exclusive rights to prevent others from manufacturing, using or selling the protected invention in a given country. A patent is a legally
SaatiMil TM PRECISION FABRICS FOR MILLING & SIFTING APPLICATIONS
SaatiMil TM PRECISION FABRICS FOR MILLING & SIFTING APPLICATIONS Perfecting the Art of Precision Screening fabrics High-tech precision looms SaatiTech is a member of the worldwide Saati Group of companies,
Don t Let EMI/EMC Compliance Certification Slow You Down TUTORIAL
Don t Let EMI/EMC Compliance Certification Slow You Down TUTORIAL TUTORIAL Uncover Problems Early with Pre-compliance Testing EMI regulations are in place throughout the world to provide improved reliability
Oil & Gas Professional Recruitment Solutions
Oil & Gas Professional Recruitment Solutions Quality means a lot for us, too! IMRA In Brief IMRA Group is an international group of Personnel Management, Recruitment & Staffing companies with over 20 years
1 Yishun Industrial Street 1 #04-10 A Posh Bizhub Issue No : 7 Singapore Date : 06 September 2016
EQA IMS Certification Pte Ltd Certifícate No : QS-2012-19 #04-10 A Posh Bizhub Issue No : 7 Date : 06 September 2016 Page : 1 of 2 Accreditation Field : Quality Management System Certification The accreditation
MS9740A Optical Spectrum Analyzer New function introduction
Product Introduction MS9740A Optical Spectrum Analyzer New function introduction MS9740A Optical Spectrum Analyzer MS9740A Optical Spectrum Analyzer New function introduction Anritsu Corporation 2014,
Opportunities and Risks of Fintech to Economic Welfare. Zhaoli Meng Dean of JD Finance Research Institute
Opportunities and Risks of Fintech to Economic Welfare Zhaoli Meng Dean of JD Finance Research Institute 01 Fintech & Economic Welfare CONTENT Big Data & Digital China The Missing Piece of Puzzle 02 2
TEST REPORT IEC Information technology equipment - Safety - Part 1: General requirements
Issue Date: 2015-01-12 Page 1 of 107 Report Reference # E252373-A7-CB-4 Test Report issued under the responsibility of: Report Reference No... : TEST REPORT IEC 60950-1 Information technology equipment
KickStart Instrument Control Software Datasheet
KickStart Instrument Control Software Datasheet Key Features Built-in I-V characterizer, datalogger, and precision DC power applications Optional high resistivity measurement application that complies
Usage E-UTRA Band. MA2700 InterferenceHunter with Bandpass Filter and Yagi Antenna
Technical Data Sheet Bandpass Filters Introduction The Anritsu bandpass filters in this series are designed to be used with the MA27 InterferenceHunter handheld direction finding system. The bands offered
Proper Bias-T Usage to Avoid PPG Damage
Technical Note Proper Bias-T Usage to Avoid PPG Damage MP1800A Series Signal Quality Analyzer Contents 1. Introduction... 2 2. Precautions for using Bias-T... 3 3. Simulation Data... 4 4. Empirical Data...
Hanyoung Industry - Global Company Taking Korea to the World Hanyoung Industrial.Co.,Ltd.
Hanyoung Industry - Global Company Taking Korea to the World Hanyoung Industrial.Co.,Ltd. Global HANYOUNG Industry Hanyoung Industry, small but globally powerful Contents MESSAGE FROM THE CEO Hanyoung
Welcome to a radically different approach to cancer treatment.
Welcome to a radically different approach to cancer treatment. Yesterday s boundaries are today s starting points. Introducing the TrueBeam system for radiotherapy and the TrueBeam STx system for radiosurgery.
Comparison of MS2830A and NF Analyzer for Noise Figure Measurement
Application Note Comparison of and for Noise Figure Measurement Signal Analyzer Overview This document describes the comparisons with Standard about the noise figure measurement. The noise figure measurement
Keysight Technologies MATLAB Data Analysis Software Packages
Keysight Technologies MATLAB Data Analysis Software Packages For Keysight Oscilloscopes Data Sheet 02 Keysight MATLAB Data Analysis Software Packages - Data Sheet Enhance your InfiniiVision or Infiniium
Static Toolholders DIN 69880
Static Toolholders DIN 69880 High Precision and Rigidity Higher Productivity WTO s strategy is to constantly build on excellence in technology and quality to serve our customers. As recognized pioneer
PROFESSIONAL RADIO. Turnkey TETRA coverage solutions for extremes
PROFESSIONAL RADIO Turnkey TETRA coverage solutions for extremes Reliable and effective public safety communication is crucial while managing critical and life threatening situations. The TETRA network
Luvata presentation
Luvata presentation 14.04.2010 Luvata Luvata Pori Oy Metallurgical Applications 2 Luvata Pori Oy Luvata Luvata Pori Oy Metallurgical Applications 3 Luvata Pori Oy World-leader in metal fabrication, component
Isolation Addresses Common Sources of Differential Measurement Error
By Tom Neville A typical measurement system includes an oscilloscope and an oscilloscope probe that provides the connection between the device under test (DUT) and the oscilloscope. Probe selection is
How to take advantage of China knowledge base?
How to take advantage of China knowledge base? A CEIBS-SKEMA joint research project Barcelona, November 2013. 02/12/2013 1 A changing landscape A new world order in innovation is taking hold, one in which
Datasheet-TD3. TD3 Tangent Delta Tester. TD3 High repeatability - Low maintenance
TD3 Tangent Delta Tester TD3 High repeatability - Low maintenance TD3 Cost efficient TgD tester High repeatability of the measurements Compare results with multiple curves Round and Flat wire in one system
TEST REPORT IEC : 2005 (2nd Edition) and/or EN :2006 Information technology equipment Safety Part 1: General requirements
Test Report issued under the responsibility of: TEST REPORT IEC 60950-1: 2005 (2nd Edition) and/or EN 60950-1:2006 Information technology equipment Safety Part 1: General requirements Report Reference
2017 3rd International Conference on E-commerce and Contemporary Economic Development (ECED 2017) ISBN:
2017 3rd International Conference on E-commerce and Contemporary Economic Development (ECED 2017) ISBN: 978-1-60595-446-2 Present Situation of Construction of the National Digital Publishing Industrial
How big is China s Digital Economy
How big is China s Digital Economy Alicia Garcia Herrero Senior Fellow, Bruegel Jianwei Xu Beijing Normal University & Bruegel November 2017 Roadmap 1. Motivation 2. Internationally comparable measures
SMART HYDRAULICS MINING & CONSTRUCTION AGRICULTURE & MAINTENANCE LOAD HANDLING FORESTRY HOISTING RECYCLING DEFENSE INDUSTRIAL ENERGY
Manufacturing tomorrow s intelligent hydraulic systems by collaborating and empowering industries today. SMART HYDRAULICS MINING & CONSTRUCTION AGRICULTURE & MAINTENANCE LOAD HANDLING FORESTRY HOISTING
MUHAMMAD IMRAN MALIK. Updating
MUHAMMAD IMRAN MALIK Updating Mr. Cesar Alex Panduro Arevalo Mr. Cesar Alex Panduro Arevalo, 50, joined the Board on 1 st September, 2013 with Bata Pakistan Limited. Presently, Mr. Cesar Alex Panduro Arevalo