Walk-Through Metal Detectors

Transcription

1 Walk-Through Metal Detectors

2 Technical Features Technology: DSP (Digital Signal Processing) Detection Zones: 8 Parallel Overlapping Detection Zones, Separate Zone Sensitivity Adjustment Feature for each distinct zone and Sensitivity Steps GRT (Gun Reveal Technology) Wireless interface Battery Operated Carry-On Vibrating Gun Alert Device Automatic Operation Frequency Selection Feature enabling interference free operation of Multiple WTMDs without the need for any manual adjustments. 76 cm Net Passage Width Metal Density Display LED Bar Graph Digital Password + Electronic Hardware Key Protection BITE (Built In Test Equipment) performing self test Green(Normal)/Red(Failure) Operation Status LED indications that can be recognized from 10 m distance. Green/Red Traffic Through LED indications and 6 Digit In/Out Counters can count up to visitors Product Brochure USB Port Battery Back-Up LCD Screen IRDA Pilot Remote Controller Relay Output Two Level Menu Access Password Administrator/Operator and Operator Limitations Enabled

3 GRT (Gun Reveal Technology) Scanmaster WTMDs have a unique feature. Our technologic advances are under Industrial Property Rights protection. Conventional WTMDs perform detection for a single security level and provide audio-visual Alarms. Scanmaster /GRT enables operators to set a secondary Security Level for Gun Size Threat Objects to trigger Vibrating Gun Alerts to a Vibrating Carry-On Gun Alert Device delivering instant Vibrating Alerts using wireless Communication interface. Whilst primary General Sensitivity Settings in course, the Scanmaster /GRT may generate Audio-Visual Alarm Indications. The Secondary Security Level should be set for Gun Size Threat Objects to trigger a Vibrating Alert delivering instant wireless signals to a vibrating carry-on battery operated device on security staff that can be attached with a belt clip. Accordingly, the Scanmaster /GRT can simultaneously perform detection for two separate sensitivity settings. Such technological advance provides awareness with Security Staff and helps prevent neglecting their checkpoint screening procedures due two many alarms which we may witness at locations like shopping malls etc. Scanmaster /GRT Alarm Modes Audio-Visual/Silent-Visual/Audio-Visual and Vibration

4 DSP (Digital Signal Processing Technology) Scanmaster WTMDs use latest technology DSP (Digital Signal Processing). The use of such advanced technology provides discreet solutions to perform complex mathematical calculation formulas within microseconds without the need to round up the very sensitive magnetic field measurements. The use of DSP technology provides superior advantages compared to Analog Devices in regards the need for Superior Detection Performance and the use of multiple applications in perfect synchronization. In most applications, the equipment's those which perform using Analog Technology we have observed that the sensitivity adjustment is not very precise and the WTMDs may generate alarms either for even smaller objects which are considered to be negligible or cannot detect at all at lower sensitivity settings whereby authorities prefer not to detect unconscious metallic objects. Especially with most Chinese Origin WTMDs, lower sensitivity settings may result in failure of detection. Scanmaster /GRT enables precise sensitivity settings between steps thanks to our advanced DSP Technology. DSP Technology pr0vides a superior technical base for further developments. DSP Technology provides ease for perfect synchronization of multiple applications at very high speeds and perfect synchronization.

5 8 Parallel Overlapping Detection Zones (Multi-Zone) Scanmaster WTMDs perform Multi-Zone Operation with 8 Parallel Overlapping Detection Zones. LED Detection Zone Indicators provides visual LED Light indications only for the Detection Areas. Targeted Zone indications provides ease for Security Screening Checkpoint Staff. Scanmaster /GRT enables separate zone sensitivity settings feature for each distinct zone. Zone LEDs are from bottom to top of one side panel of the WTMD without any dead zones.

6 Green/Red Traffic Through Lights Scanmaster WTMDs have bicolor Green/Red Pacing Lights at the entrance side of the WTMD Passage. Pacing lights are in use to control the traffic thorough and to prevent multiple entries at a time so that single detections can be performed in sequence enabling counter values increase by one after each visitor. When the WTMD Passage is empty and WTMD is ready for a new detection, the pacing lights will be Green. When there will be a person inside the WTMD Passage the pacing lights will indicate Red and will turn to red after completion of the pass through process indicating readiness for a new detection.

7 Traffic Counters Scanmaster WTMDs count both the incoming and outgoing traffic and display the counter values on LCD. Scanmaster /GRT also provides statistical information regarding the number of alarms generated and the clean visitors. Counter values can be reset easily. There is a 6 Digit Counter Feature in course enabling proper counting of up to persons without any need to reset the counters.

8 USB Port Scanmaster Walk-Through Metal Detectors are equipped with 1 USB Port Slot on the front side of the Control Panel providing easy Access. USB Port enables connection of a FAT32 Format Flash Memor (USB Stick) to your WTMD and below Screen Display appears on the LCD Screen. In USB Menu the following features are enabled; - Downloading All WTMD Settings - Uploading WTMD Settings to a different WTMD in a matter of seconds - Exporting Statistical Information to a text file Such features provides great advantages for expert level users with large number of WTMDs installed at different locations. This feature is mostly preferred by Professional Shopping Mall Managements.

9 Supported Hardware Levels Scanmaster WTMDs are being offered at different equipment levels and supported features. Please make sure the desired configuration of our WTMD is in compliance with the P/I format offers you have been provided in writing. GRT (Gun Reveal Technology) Wireless Interface Battery Operated Vibrating Carry-On Vibrating Gun Alert Device that delivers instant Vibrating Gun Alerts for a secondary sensitivity level to trigger Vibration Alarms for Gun Size Threat Objects. Built-in Battery Back Up System enabling minimum 2 hours Continuous Operation against electricity cut-offs. Whilst Normal Operation, the system charges itself automatically. USB Port Hardware Electronic Key Power Socket both at Bottom (on the Side Panel) and on Top of the Control Unit providing ease of installation at different locations whereby there will be a need for energy connection either from top or bottom IRDA Pilot Remote Controller Multi-Zone Location LEDs at Both Entrance and Exit Sides of the WTMD

10 76 cm Net Passage Width Net Passage Width of WTMD Scanmaster /GRT is 76 cm. Passage Width of many other WTMDs (Especially the ones of Chinese Origin) being offered in the Marketplace is 70 cm which is not in compliance with International Passage Dimension Requirements. Narrower Passage Width WTMDs have the following disadvantages; - Vibration Caused False Alarms due physical contact to side panels - False Alarms and Sensitivity Setting Difficulties due Metal Objects passing from a close distance to WTMD Side Panel Structures Accordingly, a wider passage width offers both practical and technical advances even though it requires a better technology and performance to scan greater widths. 76 cm.

11 0-999 Steps Adjustable Sensitivity WTMD Scanmaster /GRT has 5 Fixed, 20 Adjustable a total of 25 Security Programs for easy sensitivity settings. Thanks to the advanced DSP Technology in course, Scanmaster /GRT offers Steps adjustable sensitivity for each program level and distinct detection zones. SECURITY LEVEL SENSITIVITY VALUE SECURITY LEVEL SENSITIVITY VALUE Security Level 1 20 Security Level Security Level 2 40 Security Level Security Level 3 60 Security Level Security Level 4 80 Security Level Security Level Security Level Security Level Security Level Security Level Security Level Security Level Security Level 21 MALL 80 Security Level Security Level 22--SCHOOL 55 Security Level Security Level 23 GOVERNMENT OFFICES 50 Security Level Security Level 24 LAW ENFORCEMENT 25 Security Level Security Level 25 CORRECTION FACILITY 20 Security Level

12 Two Level Menu Access Protection (Hardware Electronic Key + Digital Password) Scanmaster Walk-Through Metal Detectors are equipped with a Hardware Electronic Key Switch protection in addition to a 4 Digit Digital PIN Code. Once the key switch will be locked, menu Access keys will be locked. Furthermore, the Scanmaster /GRT provides two Level Digital Passwords for different level users Administrator and Operator. Administrator Password can be used for limiting theoperators Access Level separately for each and every sub menus.

13 Quality Certificates Please click on the images to Download.

14 Some of our References from Turkey

15 MANUFACTURER Please click on the Logo Image to visit our website.