Technical Data Radio frequency range: Read this first

Transcription

1 1. General Description Power supply: DC 6V (4 x AA, Not Include.) or ext. DC adaptor 7.5V DC (Not Include) Real time clock display with day-flag 12/24 Hour clock display set by user ATT control for adjust the reception sensitivity of SW Band Manual high speed tuning with monitoring Micro step in manual for SW & FM & AM to fine tune radio station frequency Software Selected MW frequency range & tuning step for usable both Euro & America* Ascending Alarm--The buzzer sounds progressively faster in 6 levels - Built in calendar with auto leap year handling within World time of 34 cities displayed by abbreviation provided Daylight saving of local city and world time is independently programmable Alternative display of clock, date and world time is programmable 4 mode dual alarms can be set to daily, weekday, week-end independently and one day only Alarm output can be set to radio or buzzer. Programmable Snooze timer function(1-59 minutes) 10 User setting SDA (Special Date Alert) Sleep timer up to 90 minutes(10-90 minutes) Stop watch up to 99 minute and 59 second. AMS function (Automatic Memory System) 400 memories preset radio station are free allocated for 4 band Automatic/Manual search Up/Down features are provided Memory scan feature is provided Battery-Low Indicator with auto power off function at radio mode Electronic Volume Control LCD back light with high-low dimmer Key lock function to prevent accidental keying Technical Data Radio frequency range: Band Freq. range Freq./Fine FM MHz 100KHz/50 KHz SW MHz 5 KHz/1KHz MW(1) KHz 9 KHz/1KHz MW(2) KHz 10KHz/1KHz LW KHz 1 KHz Power consumption: 5W Operating temperature: +5 ~ +35 Read this first 1,Battery: This unit uses 4 UM3/AA/R6 size 1.5V batteries (not included). Insert batteries correctly with + and polarities as directed inside the battery compartment, wrong polarities insertion will cause damage to the unit. Do not use new and old batteries together. If the unit is disconnected from power source, reapplying the electric supply to the unit within 30 seconds can preserve all settings inside the memory, otherwise, the preset data will be erased, and it is required to re-write the memory again. Battery Low Indicator: If the batteries are out of electric power, the low batteries icon goes solid. It is suggested to replace the old batteries as soon as possible. It is important to use 7.5V adapter with positive + polarity located at interior, as the symbol illustrated beside the Adapter Input. Use adapters with wrong polarity or voltage will cause damage to the unit. 1

2 Note:It is recommended to always put 4pcs of UM3 battery inside the battery compartment as back up power, even when external adapter is used. So as to avoid the discontinuity of electric supply. Protect the unit from high humidity and avoid putting it on wet surface Operating elements: 1. Display 2. Power 3. Save button M.0/5~M.4/9 4. Memory Scan 5. Page 6. Mem. 7. Alarm 2 / Volume 8. Alarm 1 / Volume + 9. Mode 10. Bass 11. Fine 12. DOWN 13. UP 14. Loudspeakers 15. SNOOZE / Sleep Timer /Stopwatch/Countdown Timer Start/Stop 16. Waveband selector switch( LW/SW/MW/FM) 17. Switch SW SEN.(DX/LX) 18. Headphone output 19. Mains adapter connection 20. Antenna 21. Stand 22. Battery door 23. Carrying strap 2

3 2 How to used As the unit is powered up, the date and clock are defaulted to Tuesday,1 st Jan 2008,0:00. The two alarms are defaulted to 0:00, The unit is standby mode 2.1 Auto-run Mode (Radio OFF) Press <Mode> once go to different mode sequentially WE320 manual of English Auto-run Mode Set the Clock Set the Date Set the Local City Set the City Set the SDA with Clock display for world time Set update switch Set 12/24 hours Set the duration Area selection of Snooze for MW 2.2 Set the clock Press <Mode > once when the unit stays in clock display mode The clock goes flashing Press <Up> to advance the clock by 1 minute Press <Down> to move the clock back by 1 minute Press and hold <Up> or <Down> to set the clock in fast mode mode 2.3 Set the date Press <Mode> twice, the current date goes flashing in the format of dd. mm. yy Press <Up> or <Down> to change the current setting by 1 day per step. Press and hold <Up> or <Down> to change the setting in fast mode. 2.4 Set the local city Press<Mode> three. The current setting of the local city goes flashing with 'LOCAL CITY' solid. The hour and minutes in the time section together with the day-flag are all cleared. Press <Up> or <Down> to select the desired time zone represented by different city abbreviation: No Indication Time Time City No Indication difference difference City 1 HNL -10 Honolulu /USA 18 PAR 1 Paris /France 2 ANC -9 Anchorage /USA 19 ROM 1 Rome /Italy 3 YVR -8 Vancouver /Canada 20 CAI 2 Cairo /Egypt 4 LAX -8 Los Angeles /USA 21 IST 2 Istanbul /Turkey 5 DEN -7 Denver /USA 22 MOW 3 Moscow /Russia 6 CHI -6 Chicago /USA 23 KWI 3 Kuwait City/Kuwait 7 MEX -6 Mexico City /Mexico 24 DXB 4 Dubai /Saudi Arabia 8 NYC -5 New York /USA 25 KHI 5 Karachi /Pakistan 9 YYZ -5 Toronto /Canada 26 DAC 6 Dacca /Bangladesh 10 YUL -5 Montreal /Canada 27 BKK 7 Bangkok /Thailand 11 CCS -4 Caracas /Venezuela 28 SIN 8 Singapore 12 RIO -3 Rio De Janeiro /Brazil 29 HKG 8 Hong Kong 13 BUE -3 Buenos Aires /Argentina 30 PEK 8 Beijing /China 14 UTC 0 Universal Time Coordinated 31 TYO 9 Tokyo /Japan 15 LON 0 London /UK 32 SYD 10 Sydney /Australia 16 MUN 1 Munich /Germany 33 NOU 11 Noumea /New Caledonia 17 FRA 1 Frankfurt /Germany 34 AKL 12 Auckland /New Zealand The SUN reflects the status of daylight saving, press < Snooze > to change it. When no key has been pressed for 10 seconds, it switches to auto-run 3

4 2.5 Review the world time Press <Mode> again or four times, the previously accessed time zone goes solid in the hour-minute section with the corresponding city abbreviation goes flashing in the right. CITY goes solid at the top. Press <Up> or <Down> to select the desired time zone according to the table in 2.4. Press <Snooze> to change the daylight saving of that time zone. The current status is reflected by the SUN ON, then disappear after 5 seconds, press again <Snooze> SUN OFF flash in LCD. 2.6 Set the SDA Press <Mode> fifth time,the date & SDA goes flashing alternative. Press <Page> to select 1-10 SDA which want to set Press <Up> or <Down> to set the Special Date. Press < Snooze > to ignore the year In case of ignore the year the SDA will be active ever year at same date 2.7 Area selection for MW Press <Mode>sixth times, the current area EU 9K goes solid. Press <Up> once to change the area to EU and EU 9K goes solid Press <Down> once to change the area to US and US 10K goes solid. 2.8 Set the duration for Snooze Press <Mode> seventh times set the duration for snooze. Press <Up> to advance the time by 1 minute Press <Down> to move the time back by 1 minute Press and hold <Up> or <Down> to set the clock in fast mode The duration of snooze is from 1~59 minutes /24 hours mode Press <Mode>eight times. Press <Up> display 24 hours clock, press <Down> display 12 hours clock and Sleep Mode Press <Sleep> once to review the current sleep timer. Or ON goes solid if sleep has not been activated Press <Sleep> again the change the current setting down to the nearest multiple of 10 minutes within min. Press <Sleep> when the current setting is 10 min, OFF goes solid which implies the sleep will be switched off. Press other key to start its corresponding function with the current sleep timer setting valid When no key has been pressed for 10 seconds, the system goes back to auto-run mode with sleep timer setting valid Timer setting (Radio Off) Press and hold <Page> to enter STOP WATCH, display shows U Press <Snooze> once to start, the timer s max value is 99 minute and 59 second. Press <Snooze> again to pause. Press and hold <Snooze> to clear the timer. Press <Page> to leave the timer. When it counts up to the max value, the system returns to stay in and flashing The Countdown Timer setting (Radio Off) Press and hold <Memory Scan> to enter the timer preset mode, display shows d Press <Up> or <Down> to adjust the down-count value. Press <Snooze> once start to down-count timer,press <Snooze>again snooze timer. When the time down counts to 00.00, the voice be be be be be will be heard for one minute. 4

5 5 countdown times are preset on the memory button, the duration countdown timer of M0/5 is defaulted to 10minutes; M1/6 is defaulted to 30minutes; M2/7 is defaulted to 45minutes; M3/8 is defaulted to 60minutes; M4/9 is defaulted to 90minutes;. Press <Memory Scan> again to leave the down-count timer preset mode 2.13 Alarm1 and Alarm2 setting Press <Alarm1> or <Alarm2> once, Alarm1 or Alarm2 goes solid in the alphanumeric section. The current setting of HH:MM and the type of alarm goes flashing. Press <UP> to advance the setting by 1 minute Press <Down> to move the setting back by 1 minute Press and hold <UP> or <Down> to change the setting in fast mode Press <Snooze> to change the type of alarm between daily, weekend and weekday. Press and hold <SNOOZE> enter the single day mode; press <SNOOZE> to select the day and the corresponding week goes solid. Press and hold <SNOOZE> again to exit. Press same alarm key, which is <Alarm1> or <Alarm2>, once to select the output format of the alarm Output format Beep sound Radio output Disable LCD display Bell symbol goes solid Radio symbol goes solid All the Bell and Radio are cleared When no key has been pressed for 10 seconds, the system goes back to auto-run mode 2.14 When SDA is active When the date/month/(year) matches with the SDA which has been enable, alert becomes active at 8:00AM As the SDA active, Sound of beep toggles at the Speaker for 10 minutes, Muted Radio even radio ON & The SDA goes flash on LCD display The beep will sound ever hour for 10 minutes until 23:00 Press any key to start its corresponding function and the SDA will be terminate 2.15 When alarm is active When the real time clock matches with the alarm which has been enabled, alarm becomes active As the alarm becomes active, the sleep mode, if exists, is terminated immediately If Beep sound alarm is selected, a ) Sound of beep toggles at the Speaker b)muted Radio even radio ON c) The duration of alarm is 10 minutes If Radio alarm is selected, a) Radio On b) the duration of the alarm is 60 minutes To postpone the currently active alarm by 10 minutes, press <Snooze> once. The alarm will be stopped and will become active again 10 minutes later. To terminate the currently active alarm, press the corresponding key <Alarm1> or <Alarm2> Store into memory There are 40 pages, 10 memory stations for each page of the radio When the radio is ON,press <Mem.> once. The screen shows the memory page and MEM goes flashing. Press <Page> once, PAGE goes flashing, and 00 goes solid below the segment PAGE. Press again <Down >or <Up> to select the page 0~39. Press <M.0/5>~ <M.4/9> to select a memory space to store the station. Press <Mem.> again to confirm the process of storing. Then, MEM goes solid Fine Turn When the radio is ON, press <Fine> once to active fine turn and FINE goes solid, after 5 seconds disappear then display frequently Press <Up> once to change the receiving frequency up by 1 micro step Press <Down> once to change the receiving frequency down by 1 micro step. Press <Fine> again shut off FINE function, normal will display after 5 seconds disappear then frequently flash in LCD,last return to normal turning. This function is no effect in LW band. 5

6 2.18 Memory review When the radio is ON, press <Memory Scan> once to scan memory stations. The scanning starts from the next memory station or MEM-1 if no memory station is being selected. Scanning will stop at each station for 5 seconds Setting Bass When the radio on, press <Bass> once in bass display mode. Press <Bass> again to shut off this function and volume recover normal Search Up/Down When the radio is ON, press <Up> once to change the receiving frequency up by 1 step Press <Down> once to change the receiving frequency down by 1 step. Press and hold <Up> to search the next radio station by moving the receiving frequency up. Press and hold <Down> to search the next radio station by moving the receiving frequency down AMS Using Press <MEM> once to memory mode. Press and hold <Memory Scan> 2 seconds to active AMS mode. In this mode, the radio will automatically store the station that had been scanned Display Mode With the system stays in clock display mode and the radio is OFF, press <Fine> once, the time section and day-flag are all cleared with the current mode of display is shown by the icon, CITY DATE, and CIT, DAT Mode of display LCD Clock only CLOCK goes solid only Clock + World Time CLOCK + CITY go solid Clock + Date CLOCK + DATE go solid Clock + Date + World Time CLOCK + DATE + CITY go solid Press <Fine> to go through the cycle of selection. If 'Date' and/or 'World Time' is selected, it/they will be shown alternatively with the clock in the LCD when the radio is OFF. When the radio is ON and the system stays in frequency display mode, only the frequency of the station being received will be displayed no matter what has been selected by in display mode Electronic Volume Control Only when radio is on, Press < Volume +> once, to increase speaker volume by one step. Hold for continually. Press < Volume > once, to decrease speaker volume by one step. Hold for continually Key-lock Press and hold the <MEM.> for 3 seconds, key-lock has been switched ON, the KEYLOCK goes solid, 2.25 LCD Backlight Press any key to activate the LCD Backlight for 10 seconds. When key-lock is active, only Snooze have function Antenna Maximum length and rotate it to a best position. For MW and LW band, an internal Ferrite-bar Antenna is used, so you may turn the unit to different direction in order to have a better receiving result Stand You may foldout Stand from the backside of the unit to an appropriate position, so that this unit can be placed firmly on the table 6