DEUTSCH NEDERLANDS ENGLISH ESPAÑOL FRANÇAIS PORTUGUÊS DAB2035

Transcription

1 DEUTSCH ENGLISH FRANÇAIS NEDERLANDS ESPAÑOL PORTUGUÊS DAB2035

2 DAB2035 PLL FM Kitchen Radio 1 General Description DAB+ / FM band provide radio station name & automatic clock up-date An electronic module for digital tuning radio Precise crystal is used for system operation Real time clock display with day-flag 12/24 Hour clock display Built in calendar with auto leap year handling within mode dual alarms can be set to daily, weekday, week-end and daily independently Alarm output can be set to DAB, FM or Buzzer sound. 10 SDA (Special Date Alert) provide 10 preset for cooking timer (1 minute to 23:59) AMS function (Automatic Memory System) 20 preset radio station for user favorite Automatic/Manual search Up/Down features are provided Electronic Volume Control (16 level ) Back light with high-low dimmer A.O.T (Auto Off Timer) function Auto standby after 4 hours when user no press any key. Technical Data Rated Voltage : DC 5.5V 2A Power consumption : max. 7W Radio Frequency range: FM 87.50MHz MHz 50KHz/step DAB MHz ~ MHz 1.712MHz/step Operating temperature: +5 ~ +35 Battery for data retention : 1 x 3V Type CR

3 18 19 ANTENNA 2 Operating Components 1. Power Turn on /off the unit 2. Down Tuning down / Seeking down 3. Up Tuning up /Seeking up 4. FUNC/Lock Switch DAB / FM band & key-lock 5. Auto Scan Scan 6. Info Show information of station 7. Menu Enter Setting mode / Exit Setting 8. Preset Enter preset setting or select mode 9. Select Enter or Confirm 10. AOT Start AOT function or Setting timer for AOT 11. Timer Enter Cooking timer mode or start / pause cooking timer 12. Vol - /Al2 Decrease volume or review alarm Vol + /Al1 Increase volume or review alarm Display 15. Mounting Plate 16. Antenna socket Connection socket for DVB-T antenna 17. DC-Socket Current connection socket(5.5v) for power adapter 18. Spacer For under-cabinet installation 19. Switching Adapter 2-9

4 3 The default of device When unit is powered up first time, the date and clock are defaulted to 00:00 Sunday The alarms are defaulted to 0:00, The radio is switched off It then switches to auto-run mode The energy saving is OFF. 4 How to setup device When Auto-Run Mode, Press <MENU> once go to setting mode. S e t M e n u < S e t C l o c k > Use <UP> or <DOWN> go to different mode sequentially Auto-run Mode with Clock and Date display 1. Set the Clock 2. Set the Calendar 3. Set the SDA 4. Set 12/24 hour 5. Set alarm 6. Set Dimmer 7. Set Energy Saving 4.1 Set the clock Press <UP> or <DOWN> to select 'Set Clock' when set menu mode Press <Select> to enter Set Clock S e t M i n u t e < 0 0 : 0 0 > Press <UP> or <DOWN> to Set value of minutes. Press <Select> to Confirm minute Set and enter set hour mode S e t H o u r < 0 0 : 0 0 > Press <UP> or <DOWN> to Set value of hours. Press <Select> to Confirm hour Set and return to set menu. 4.2 Set the calendar Press <UP> or <DOWN> to select 'Set Calendar' when set menu mode. 3-9

5 Press <Select> to enter Set calendar. S e t D a t e Press <UP> or <DOWN> to Set value of dates. Press <Select> to Confirm date set and enter set month mode. S e t M o n t h Press <UP> or <DOWN> to Set value of months. Press <Select> to Confirm month set and enter set year mode S e t Y e a r Press <UP> or <DOWN> to Set value of years. Press <Select> to Confirm year set and return to set menu. 4.3 Set the SDA Press <UP> or <DOWN> to Set SDA when set menu mode. Press <Select> to enter Set SDA. There are 10 SDA. S e t S D A < S D A 1 > Press <UP> or <DOWN> to select number of SDA. Press <Select> to Confirm user select and enter set the SDA of user selected. S e t S D A 0 1 D a t e Press <UP> or <DOWN> to Set value of date. Press <Select> to Confirm date and enter set month mode. S e t S D A 0 1 M o n t h Press <UP> or <DOWN> to Set value of month. Press <Select> to Confirm month and enter set year mode. S e t S D A 0 1 Y e a r Press <UP> or <DOWN> to Set value of year. Press <Select> to Confirm year and return to set menu. 4.4 Set 12/24 hour format 4-9

6 Press <UP> or <DOWN> to select 12/24 hour format when set menu mode. Press <Select> to enter set 12/24 hour format. S e t 1 2 / 2 4 H o u r < 2 4 H o u r > Press <UP> or <DOWN> to select 12 or hour format. Press <Select> to Confirm select and return to set menu. DAB2035 operating instruction of English 4.5 Set the alarm Press <UP> or <DOWN> to select 'Set Alarm' when set menu mode. Press <Select> to enter set alarm. S e t A l a r m < S e t A l a r m 1 > Press <UP> or <DOWN> to select number of alarm. Press <Select> to Confirm user select and enter set the alarm of user selected. S e t M i n u t e < 0 0 : 0 0 > Press <UP> or <DOWN> to Set value of minute for alarm. Press <Select> to Confirm minute and enter set hour mode. S e t H o u r < 0 0 : 0 0 > Press <UP> or <DOWN> to Set value of hour for alarm. Press <Select> to Confirm hour and enter set output mode. S e t O u t p u t < A l a r m 1 D i s a b l e > there are four kinds of choices, it is respectively: Table 1: Kinds Means Disable DAB FM Buzzer Alarm is disable (default) DAB sound for alarm active FM sound for alarm active Buzzer sound for alarm active Press <UP> or <DOWN> to select the kind. Press <Select> to Confirm the select and enter set days. S e t D a y s < A l a r m 1 D a i l y > There are ten kinds of choices, it is respectively: 5-9

7 Kinds Daily Table 2: Means Alarm work in every day Weekday Weekend Sun,Mon.. Sat Alarm work in weekday Alarm work in weekend Alarm work in one day of week Press <UP> or <DOWN> to select the kind. Press <Select> to Confirm the select and return to set menu. 4.6 Set Dimmer Press <UP> or <DOWN> to select 'Set Dimmer' when set menu mode. Press <Select> to enter set dimmer. S e t D i m m e r < L o w > Press <UP> or <DOWN> to select Low or High. Default is Low. Press <Select> to Confirm select and return to set menu. 4.7 Set energy saving Press <UP> or <DOWN> to select 'energy saving' when set menu mode. Press <Select> to enter set energy saving. E n e r g r S a v i n g < O f f > Press <UP> or <DOWN> to select On or Off. Default is Off. Press <Select> to Confirm select and return to set menu. 5 How to using device 5.1 Using the radio Radio on/off and band select Press <Power> once to turn on the radio. Press <Power> again to turn off the radio. Press <FUNC> to select DAB or FM Electronic Volume Control Press <VOL+ / AL1> once, to increase speaker volume by one step. Hold for continually. Press <VOL- / AL2> once, to decrease speaker volume by one step. Hold for continually Using DAB band When DAB is first time, Automatic Scan function will start automatically and "Scanning 0" on LCD Select DAB station Press <UP> or <DOWN>once to select DAB station list. Press <Select> once to confirm and tune to the station Store station into preset 6-9

8 Press and hold <Select> to store value of timer into The current position Recall the preset Press <Select> to Confirm select and recall the frequency AMS using Press and hold <auto-scan> for 2 seconds to active AMS mode. In this mode, the radio will automatically scan the radio station and store the station that had been scanned until scan up all the frequency or stored all the memory station, it will exit automatically Review information of station Press <info> to review information of station. There are eight kinds of choices, it is respectively: a. Station time b. Station frequency and block number c. Data rate d. Station RSSI e. Signal error Rate f. DLS (Scrolling text) g. Program type h. Station name Using FM band Search Up/Down When the radio is ON, press <UP> once to change the receiving frequency up by 1 step Press <DOWN> once to change the receiving frequency down by 1 step. Press and hold <UP> to search the next radio station by moving the receiving frequency up. Press and hold <DOWN> to search the next radio station by moving the receiving frequency down store station into preset Press and hold <Select> to store value of timer into The current position Recall the preset Press <Select> to Confirm select and recall the frequency AMS using Press and hold <auto-scan> for 2 seconds to active AMS mode. In this mode, the radio will automatically scan the radio station and store the station that had been scanned until scan up all the frequency or stored all the memory station, it will exit automatically. Review station of AMS store. a. Press and hold <Preset> to enter select list of AMS store mode. b. Press <Up> or <Down> to select station. c. Press <Select> to Confirm select and tune to new frequency Set stereo On/Off Press <Menu> once to 'FM set menu' mode. Press <UP> or <DOWN> to select 'Audio setting'. Press <Select> Confirm select and enter 'Audio setting' set mode. 7-9

9 Press <Up> or <DOWN> to select set. Press <Select> Confirm and return to 'FM set menu' mode Review information of station Press <info> to review information of station. There are four kinds of choices, it is respectively: a. Station time b. Station text c. Station Program type d. Station RSSI 5.2 using the AOT When radio is on, press the <AOT> key once, the LCD displays AOT Setting 90. If radio is off, will turn on the radio. Press <AOT> once to change the time down by 5 minutes, press and hold <AOT> to change the setting in fast mode. Press <AOT> once to review the current AOT timer, when AOT is active. When the time is count down over, it will turn off the radio automatically. Note : When no key has been pressed for 15 seconds, the system exit AOT timer display mode, but the AOT timer is run at background. 5.3 Using the cooking timer quick start cooking timer Press <Timer> once to enter the cooking timer mode. Press <Up> or <Down> to select value of timer in history list. Press <Timer> again to start cooking timer set value of cooking timer Press <Menu> once enter set minute of timer when the cooking timer mode Press <Up> or <Down> to change value of minute. Press <Select> to Confirm minute and enter set hour of timer. Press <Up> or <Down> to change value of hour. Press <Select> to Confirm hour. Press <Timer> once to start cooking timer Cooking Timer Value Preset There are 10 preset Cooking timer Store value into Preset Refer to set value Press and hold <Select> to store value of timer into The current position Recall the preset Press <Select> to Confirm select and recall the value Cancel Cooking Timer Press and hold <Timer> to cancel the cooking timer. Note : When no key has been pressed for 15 seconds, the system exit cooking timer display mode, but the cooking timer is run at background. 8-9

10 5.4 Quick review alarm setting Press <VOL+ / AL1> once to review alarm 1 setting. Press <VOL- / AL2> once, to review alarm 2 setting. Note : When no key has been pressed for 15 seconds, the system return to auto run mode. DAB2035 operating instruction of English 5.5 When SDA is active When the date/month/year matches with the SDA which has been enable, alert becomes active. As the SDA active, Sound of beep toggles at the Speaker for 10 minutes, cancel other & The SDA is Coming goes on LCD display The beep will sound ever hour for 10 minutes until 23:00 Press any key to start its corresponding function and the SDA will be terminate 5.6 When alarm is active When the real time clock matches with the alarm which has been enabled, alarm becomes active. As the alarm becomes active, Other function, if exists, is terminated immediately. If Beep sound alarm is selected, a) Sound of beep toggles at the Speaker b) The duration of alarm is 10 minutes If FM is selected, a) Radio On and turn to FM band b) The duration of the alarm is 10 minutes If DAB is selected, a) Radio On and turn to DAB band b) The duration of the alarm is 10 minutes Press any key to terminate the currently active alarm. 9-9