ELECTRONIC CONTROL DEVICES
|
|
|
- George Francis
- 5 years ago
- Views:
Transcription
1 ELECTRONIC CONTROL DEVICES
2 INDEX Subject Page INTRODUCTION... 3 ELECTRONIC CONTROL UNIT... 4 SPEED SENSOR... 6 PRESSURE SENSOR... 8 AIR/FLUID TEMPERATURE SENSOR... 9 SWIVEL ANGULAR SENSOR MVP SERIES...10 SWIVEL ANGULAR SENSOR LVP SERIES CONNECTORS KIT BOOTLOADER TOOL AND DIAGNOSTIC CABLE SERVICE TOOL SOFTWARE ID02 DCAT
3 INTRODUCTION ELECTRONIC CONTROL DEVICES Electronic controls allow a smart management of the hydraulic power in compact mobile machines. In combination with gear motors, Casappa electronic controls allow very efficient fan drive systems or closed loop speed regulation. In combination with variable displacement piston pumps, Casappa has developed specific smart solutions, which provide a high level of flexibility and new functions to the system, along with energy saving. These solutions are named CSC, Casappa Smart Control: zcs Flow Control zcs Antistall Control zcs Torque Control zcs Power System (CSP) ADVANTAGES OF ELECTRONIC CONTROLS IN HYDRAULIC SYSTEMS: ENERGY SAVING Controls can be adapted to the specific engine and working conditions FLEXIBILITY Different functions depending on working conditions SAFETY Alarm strategies, diagnostic functions real time monitoring of the system variables DCAT ID02 3
4 ELECTRONIC CONTROL UNIT ECS200 / ECS300 New ECS200 / ECS300 Electronic control Unit: zrobust case z24 pins: 2x12 poles Deutsch DTM z32 bit floating point Power-PC running at 120 Mhz z12 bit A/D converter zup to 2 CAN 2.0B port z3 Output stages with pulse-width-modulated current regulation (PWM) zdownload the software from a PC to the flash memory zcan be used in all type of mobile operating machines (agriculture, forestry, building construction) zthe CAN BUS is available with CAN open and SAE J1939 standard zbluetooth Connectivity zhardware SIL compliant Working conditions Power supply Operating temperature Max output current Current consumption Short circuit immunity Reverse polarity protection 8 32 V DC C ( F) 4,5 A - 12 V DC < 200 ma Against ground Against Vbb Power supply lines EMC protection Radiated emission Reference standards: UNI EN Frequency range: 30 MHz 1 GHz Radiated immunity Reference standards: ISO Frequency range: 200 MHz 1 GHz Test level: 100 V/m Frequency range: 1 GHz 2 GHz Test level: 50 V/m Conducted immunity Reference standards: ISO Frequency range: 20 MHz 220 MHz Test level: 100 ma Load dump protection Reference standards: ISO Test level: 123 V Electrostatic discharge Reference standards: ISO ±4, ±6, ±8, ±15 kv (Indirect discharge) ±4, ±6, ±8, ±15 kv (Air discharge) Environmental resistance Random noise Reference standards: EN ASD = 0.1g² (RMS 3,3g) f = Hz Duration per axis (xyz): 8 h Mechanical shock Reference standards: EN Type of shock: Half sine Acceleration amplitude: = 40 g Shock duration: 6 ms 100 positive shocks for each axes 100 negative shocks for each axes IP67 Protection Reference standards: EN IP6K9K Protection Reference standards: ISO Temperature cycle test Temperature shock test Reference standards: ISO Temperature: C ( F) Number of cycles: 30 Reference standards: ISO C (-40 F) 90 C (194 F) Number of cycles: 20 Low temperature test Reference standards: ISO Temperature: -40 C (-40 F) Test duration: 24 h High temperature test Reference standards: ISO Temperature: 90 C (194 F) Test duration: 48 h Input / Output ECS200 ECS300 Analog input 6 4 Temperature sensor input 2 4 Digital/Frequency input 3 3 CAN BUS 1 2 Bluetooth No Yes Proportional output 2 High Side drive 2A 2 Low Side drive 2A with current feedback 3 High Side drive 2A 3 Low Side drive 2A with current feedback 4 ID02 DCAT
5 ELECTRONIC CONTROL UNIT ECS200 / ECS [1.4] [5.22] Grey connector Black connector [2.26] 75.4 [2.87] [4.02] 118 [4.6] 8.4 [0.33] Pinout ECS200 Pinout ECS300 Grey connector Pin Function Pin Function 1 Analog input GND 1 N.C. 2 CAN1 HIGH 2 N.C. Black connector 3 CAN1 LOW 3 Analog input n. 6 (0 5 V) 4 Speed sensor input 4 Analog input n. 4 (0 5 V) (0 Power VBB) 5 Digital input n 3 5 Analog input n. 2 (0 5 V) (0 Power VBB) 6 Digital input n 2 6 Analog input n. 7 (0 5 V) (0 Power VBB) 7 Proportional output n Temperature sensor T2 8 Proportional output n. 1-8 Temperature sensor T1 9 Proportional output n Analog input n. 3 (0 5 V) 10 Proportional output n Analog input n. 8 (0 5 V) 11 N.C. 11 Power GND - CAN GND 12 N.C. 12 Power VBB Grey connector Black connector Pin Function Pin Function 1 Analog input GND 1 CAN2 HIGH 2 CAN1 HIGH 2 CAN2 LOW 3 CAN1 LOW 3 Temperature sensor T3 4 Speed sensor input 4 Analog input n. 4 (0 5 V) (0 Power VBB) 5 Digital input n 3 5 Analog input n. 2 (0 5 V) (0 Power VBB) 6 Digital input n 2 6 Temperature sensor T4 (0 Power VBB) 7 Proportional output n Temperature sensor T2 8 Proportional output n. 1-8 Temperature sensor T1 9 Proportional output n Analog input n. 3 (0 5 V) 10 Proportional output n Analog input n. 8 (0 5 V) 11 Proportional output n Power GND - CAN GND 12 Proportional output n Power VBB DCAT ID02 5
6 SPEED SENSOR Application: Speed detection of gearwheels (for example of gear motor in fan drive systems or closed loop speed regulation) Electrical characteristics Power supply A. 4,5 24 V DC B. 12,5 32 V DC Frequency range 0,1 20 khz Operating temperature C ( F) Cable length C mm (39.37 in) D. 150 mm (5.91 in) Output type NPN Cable 3-core, 0,34 mm 2 ( in 2 ) unshielded Current load < 40 ma Short circuit immunity Yes, outputs against ground: outputs against power supply (V DC) max. 50 ma Reverse polarity protection power supply lines Output Output signal level Duty cycle 50 % ±10% Insulation strenght 500 V DC Rise / fall time < 10 μs Max. pressure on sensing surface Yes, at correctly wired outputs (max. 50 ma) Rectangle, 1 frequency signal, open collector, without pull-up Low: < 0,6 V Dynamic: 275 bar (3988 psi) Static: 275 bar (3988 psi) EMC protection Radiated immunity Reference standards: ISO Frequency range: 20 MHz 1 GHz Test level: 100 V/m Radiated immunity Reference standards: ISO Frequency range: 800 MHz 2 GHz Test level: 100 V/m Radiated immunity Reference standards: EN Frequency range: 80 MHz 2 GHz Test level: 3 V/m Frequency Range: 1,4 GHz 2 GHz Test level: 3 V/m RF common mode Reference standards: EN Frequency range: 150 khz 80 MHz Test level: 3 V Fast transients Reference standards: EN Test level: 2000 V Type of coupling: capacitive Electrostatic discharge Reference standards: EN ±4 kv Contact discharge ±8 kv Air discharge Magnetic fields Reference standards: EN Axis: X, Y, Z Level: 30 A/m Frequency points: 16 2/3 Hz; 50 Hz; 60 Hz Environmental resistance Random noise Reference standards: EN a= 0,05 g² (RMS 10 g) f= Hz Duration per axis (xyz): 5 h Shock Reference standards: EN Type of shock: Half sine Acceleration amplitude: = 100 g Shock duration: 6 ms Shocks per axis (xyz): 12 IP67 Protection Reference standards: EN IP6K9 Protection Reference standards: ISO Salt spray test Reference standards: EN Test duration: 48 h Temperature cycle test Temperature shock test Reference standards: EN Temperature: C ( F) Transition time: 5 K/min Hold time: 15 min Number of cycles: 100 Reference standards: EN C (284 F) air C (68 F) water Number of cycles: 20 Low temperature test Reference standards: EN Temperature: -40 C (-40 F) Test duration: 16 h High temperature test Reference standards: EN Temperature: 140 C (284 F) Test duration: 16 h 6 ID02 DCAT
7 SPEED SENSOR Ø13.7 [0.5394] 37.5±0.5 [1.4764±0.0197] DCAT [0.2047] Ø10h7 0 [ ] Ø4.7±0.15 [0.1850±0.0059] [ ] [ ] o-ring 9.5 x Ø [ ] 16 [0.6239] 25±0.05 [0.9843±0.002] 35 [1.3780] R5 [0.1969] Connector type: 3 pin AMP Junior Timer Connector type: 3 pin Deutsch DT04-3P Secondary Lock W3P B A C Pin Function 1 Power supply / V DC 2 Signal 3 Ground Pin A B C Function Power supply / V DC Signal Ground Mating Connector: (TE Internal Number) Mating Connector: DT06-3S with secondary lock W3S DCAT ID02 7
8 PRESSURE SENSOR Application: Pressure measurement in hydraulic circuits, for example for electronic load sensig control in CS Power System (CSP) Electrical characteristics Power supply Output signal EMC Electrical performance comply with 8 30 V DC 0,5 4,5 V EN Cable < 30 m (1181 in) ISO 7637 Electrical connection AMP superseal 1,5 Accuracy (incl. nonlinearity, hysteresis and ± 0,5 % FS repeteability) Ordering code Mechanical characteristics Pressure connection G1/4 male - DIN 3852-E Max pressure Vibration resistance Shock resistance Operating temperature Ingress protection 400 bar (5800 psi) EN g EN C ( F) IP67 with mating connector mounted 37 [1.4567] 25 [0.9843] 11 [0.4331] 7 [0.2756] 12.5 [0.4921] DCAT Electrical connection Pin Function 1 Signal 2 Ground Power supply / V DC 2 8 ID02 DCAT
9 AIR/FLUID TEMPERATURE SENSOR Application: Temperature measurement of cooling fluids, hydraulic oils, engine oil or ambient temperature in mobile machines. Electrical characteristics Type Thermistor Resistive element NTC Resistance 500 Ohm at 25 C (77 F) Ohm at 0 C (32 F) Connector Amp Junior Power Timer Ordering code Environmental characteristics Operating temperature C ( F) Ingress protection IP67 with mating connector mounted Spade terminals A2,8x0,8 - DIN Without snap-in hole Hex 24 Profile sealing DIN 3869, Viton M18x1,5 ISO DIN form E DCAT AMP Junior Power Timer 7 [0.27] 53 [2.11] 16 [0.63] 28 [1.1] 12 [0.47] Ø4 [0.16] Curve resistance/temperature NTC sensor Temperature [ C] - [( F)] 140 (284) 120 (248) 100 (212) 80 (176) 60 (140) 40 (104) 20 (68) 0 (32) -20 (-4) -40 (-40) -60 (-76) Resistence [Ohm] DCAT ID02 9
10 SWIVEL ANGULAR SENSOR MVP SERIES The swivel angular sensor converts the actual position of the swashplate into a voltage output signal that can be used for different purposes. Application: Non-contact swashplate position measurement (for example for electronic torque regulation in CS torque control). Electrical characteristics Power supply Operating temperature Cable lenght Angular resolution Output signal Cable Current consumption Short circuit immunity Reverse polarity protection 8 30 V DC C ( F) 150 mm (5.91 in) 12 bit 0,5 4,5 V 4-core, 0,34 mm 2 ( in 2 ) unshielded < 40 ma Output against ground Output against Vbb Power supply lines EMC protection Radiated emission Reference standards: UNI EN Frequency range: 30 MHz 1 GHz Radiated immunity Reference standards: ISO Frequency range: 200 MHz 2 GHz Test level: 100 V/m Load dump protection Reference standards: ISO Test level: 123 V Electrostatic discharge Reference standards: ISO ±4, ±6, ±8 kv (Contact discharge) ±4, ±6, ±8, ±15 kv (Indirect discharge) ±4, ±6, ±8, ±15 kv (Air discharge) Environmental resistance Random noise Reference standards: EN ASD= 0,1 g² (RMS 3,3 g) f= Hz Duration per axis (xyz): 8 h Mechanical shock Reference standards: EN Type of shock: Half sine Acceleration amplitude: = 40 g Shock duration: 6 ms 100 positive shocks for each axis 100 negative shocks for each axis IP67 protection Reference standards: EN IP6K9K protection Reference standards: ISO Temperature cycle test Temperature shock test Reference standards: ISO Temperature: C ( F) Number of cycles: 30 Reference standards: ISO C (-40 F) C (257 F) Number of cycles: 20 Low temperature test Reference standards: ISO Temperature: -40 C (-40 F) Test duration: 24 h High temperature test Reference standards: ISO Temperature: 125 C (257 F) Test duration: 48 h Output signal Output signal is proportional to swashplate angular position DIAG Sensor ouput signal [V] Pump displacement [%] 10 ID02 DCAT
11 SWIVEL ANGULAR SENSOR MVP SERIES Mounting position DCAT [5.91] For more information please refer to the technical catalogue. Connector type 4 pin DTM04-4P Secondary lock WM-4P Pin Function 1 Power supply / V DC 2 Signal 3 Ground 4 Vprog 2 Mating Connector: DTM06-4S with secondary lock WM-4S DCAT ID02 11
12 SWIVEL ANGULAR SENSOR LVP SERIES The swivel angular sensor converts the actual position of the swashplate into a voltage output signal that can be used for different purposes. Application: Non-contact swashplate position measurement (for example for electronic torque regulation in CS torque control). Electrical characteristics Power supply Operating temperature Cable lenght Angular resolution Output signal Cable Current consumption Short circuit immunity Reverse polarity protection 8 30 V DC C ( F) 280 mm (11.02 in) 12 bit 0,5 4,5 V 4-core, 0,34 mm 2 ( in 2 ) unshielded < 40 ma Output against ground Output against Vbb Power supply lines EMC protection Radiated emission Reference standards: UNI EN Frequency range: 30 MHz 1 GHz Radiated immunity Reference standards: ISO Frequency range: 200 MHz 2 GHz Test level: 100 V/m Load dump protection Reference standards: ISO Test level: 123 V Electrostatic discharge Reference standards: ISO ±4, ±6, ±8 kv (Contact discharge) ±4, ±6, ±8, ±15 kv (Indirect discharge) ±4, ±6, ±8, ±15 kv (Air discharge) Environmental resistance Random noise Reference standards: EN ASD= 0,1 g² (RMS 3,3 g) f= Hz Duration per axis (xyz): 8 h Mechanical shock Reference standards: EN Type of shock: Half sine Acceleration amplitude: = 40 g Shock duration: 6 ms 100 positive shocks for each axis 100 negative shocks for each axis IP67 protection Reference standards: EN IP6K9K protection Reference standards: ISO Temperature cycle test Temperature shock test Reference standards: ISO Temperature: C ( F) Number of cycles: 30 Reference standards: ISO C (-40 F) C (257 F) Number of cycles: 20 Low temperature test Reference standards: ISO Temperature: -40 C (-40 F) Test duration: 24 h High temperature test Reference standards: ISO Temperature: 125 C (257 F) Test duration: 48 h Output signal Output signal is proportional to swashplate angular position DIAG Sensor ouput signal [V] Pump displacement [%] 12 ID02 DCAT
13 SWIVEL ANGULAR SENSOR LVP SERIES Mounting position DCAT [11.02] Connector type 5 pin M12x1 male plug 90 angled Pin Function 1 Vprog 2 Power supply / V DC 3 Ground 4 Signal Mating Connector: 5 pin M12x1 female connector DCAT ID02 13
14 CONNECTORS KIT Female connector DTM06-12SA Kit include female connector, female contacts and seals. Female connector DTM06-12SB Kit include female connector, female contacts and seals. Ordering code Ordering code Technical data Operating temperature C ( F) Number of ways 12 Protection IP68 Technical data Operating temperature C ( F) Number of ways 12 Protection IP68 Female connector JR Power Timer Kit include female connector, female contacts and seals, Female connector DIN type Ordering code Ordering code Technical data Operating temperature C ( F) Number of ways 2 Wire size AWG Current rating 20 A Voltage, max 250 V DC Protection IP65 Technical data Operating temperature C ( F) Number of ways 3 Wire size AWG Current rating 16 A Voltage, max 250 V AC / 300 V DC Protection IP65 Thread size PG11 Female connector DT06-2S Kit include female connector, female contacts and seals. Ordering code RCON0016 Technical data Operating temperature C ( F) Number of ways 2 Wire size AWG Current rating 13 A Voltage, max 250 V DC Protection IP67 14 ID02 DCAT
15 CASAPPA BOOTLOADER TOOL AND DIAGNOSTIC CABLE Electronic control devices The software allows remote electronic control unit programming through CAN interface (device PCAN scope). KEY FEATURES zdirect file selection and loading zcan Baudrate selection zone-click reprogramming procedure Electronic control unit DEUTSCH I.P.D.-USA DTM06-12S To machine cable Diagnostic cable Device PCAN Scope CAN Ordering code To machine cable DCAT ID02 15
16 CASAPPA SERVICE TOOL SOFTWARE KEY FEATURES zparametrization of ECS200 / ECS300 control units zmonitor and diagnostic functions zauto detection of the different type of control unit HOME PAGE Connection through Bluetooth or CAN BUS interface. CONTROL INTERFACE Read and change software parameter. Check in case of incorrect values added. 16 ID02 DCAT
17 CASAPPA SERVICE TOOL SOFTWARE DIAGNOSTIC INTERFACE Real-time monitoring of control unit error messages. MONITOR INTERFACE Graphical view of the measured variables over time. CONFIGURATION INTERFACE Save/store control unit parameters configuration to/from file. Reset control unit parameters configuration to factory defaults. DCAT ID02 17
18 NOTES 18 ID02 DCAT
19 Our policy is one of continuous improvement in product. Specification of items may, therefore, be changed without notice.
20 EL 01 T A Edition: Headquarters: CASAPPA S.p.A. Via Balestrieri, Lemignano di Collecchio Parma (Italy) Tel. (+39) Fax (+39) IP Videoconferencing info@casappa.com
NOVOHALL Rotary Sensor touchless transmissive. Series RFX-6900
NOVOHALL Rotary Sensor touchless transmissive Series RFX-6900 Special features Very robust design to extreme environmental conditions Touchless hall technology Electrical range up to 360, in single and
ACTUATOR LA36 PRODUCT DATA SHEET
PRODUCT DATA SHEET ACTUATOR LA36 Features: 12, 24 or 36 V DC Permanent magnetic motor with resetable thermal overload protection Max. thrust 17 N, 26 N, 45 N or 68 N depending on gear ratio and spindle
NOVOHALL Rotary Sensor non-contacting. Series RSX-7900
NOVOHALL Rotary Sensor non-contacting Series RSX-7900 Special features very robust design to extreme environmental conditions high shaft load 300 N non-contacting, magnetic measuring angles up to 360 in
TECHNICAL DATASHEET #TDAX Universal Signal Inputs CAN Controller V, ma, Digital, PWM, Hz/RPM, Counter Inputs CANopen P/N: AX030121
TECHNICAL DATASHEET #TDAX030121 10 Universal Signal Inputs CAN Controller V, ma, Digital, PWM, Hz/RPM, Counter Inputs CANopen Features: 10 user selectable signal inputs: o 0-5 V o 0-10 V o 0-20 ma o 4-20
NOVOHALL Rotary Sensor non-contacting. Series RSC-2800
NOVOHALL Rotary Sensor non-contacting Series RSC-2800 Special features Non-contacting, magnetic technology Measuring range up to 360 Available with push-on coupling or marked shaft Simple mounting Protection
NOVOHALL Rotary Sensor touchless technology transmissive. Series RFC4800 analog
NOVOHALL Rotary Sensor touchless technology transmissive Series RFC4800 analog The RFC 4800 utilizes a separate magnet or magnetic position marker, attached to the rotating shaft to be measured. The orientation
Electronic Pressure Switch Type MEP
MAKING MODERN LIVING POSSIBLE Data sheet Electronic Pressure Switch Type MEP MEP 2200 and MEP 2250 versions: Dual output Output : Switch output Hysteresis % FS Time constant ms Output 2: Analogue output
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors
Temposonics Magnetostrictive, Absolute, Non-contact Linear-Position Sensors M-Series Mobile Hydraulic in-cylinder Sensor Model MH PWM Output Data Sheet SENSORS Document Part Number 551119 Revision B M-Series
Heavy Duty Pressure Transducers. PX2 Series 1 bar to 46 bar 100 kpa to 4.6 MPa 15 psi to 667 psi. Datasheet
PX2 Series bar to 46 bar 00 kpa to 4.6 MPa 5 psi to 667 psi Datasheet Table. Electrical Specifications Characteristic Ratiometric Regulated Transfer Function Order Code (See Figure 5.) AA AB AC AD CH BC
POWER SYSTEM MODE STATUS
S1X Mobile Microcomputer Technical Information 174 155 55,75 POWER SYSTEM MODE STATUS 60,25 8,5 8,5 10 9 10 123,5 10,5 AMP Stecker AMP Connector 1 14 15 28 55 29 42 Overview DESCRIPTION The Sauer-Danfoss
S5X Mobile Microcomputer. Technical Information 223,5 82,25 77,75 8,5 8,5 164,5 10,3. AMP Stecker AMP Connector 52,5 POWER SYSTEM MODE STATUS
S5X Mobile Microcomputer Technical Information 247 223,5 POWER SYSTEM 82,25 77,75 MODE STATUS 9 164,5,3 AMP Stecker AMP Connector 1 14 9 16 15 28 29 42 1 8 52,5 Overview DESCRIPTION The Sauer-Danfoss S5X
Pressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Pressure Transmitter Type AKS 32 and AKS 33 REFRIGERATION AND AIR CONDITIONING Technical leaflet 2 RD.5G.H4.02 Danfoss A/S (IC-MC/mr), 09-2004 Introduction AKS 32 and AKS 33 are pressure transmitters that
Temposonics. Magnetostrictive Linear Position Sensors. MH-Series Flexible MH Data Sheet
Temposonics Magnetostrictive Linear Position Sensors MH-Series Flexible MH Linear, absolute measurement Easy in-field installation and replacement Stroke lengths from 500 5000 mm Resolution: ±0.2 mm Analog
SPECIFICATION. Online UPS 3000VA
Page 1 / 7 DESCRIPTION Pure sine-wave output UPS on-line double conversion type. INPUT AC Mains voltage 230V ac 1 phase Mains voltage range 184...264V ac Mains frequency range 47...63Hz Power factor at
U5300 Industrial Pressure Transducer
Superior Accuracy and Total Error Band Instrument Grade CE Compliant Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber Weatherproof Gage, Sealed, Absolute,
PD30CNB25xxPS. Photoelectrics, Background suppression reflective - PointSpot. Main features. Main functions. Description
Photoelectrics, Background suppression reflective - PointSpot Main features Miniature sensor range The visible red PointSpot light makes alignment very easy Range: 250 mm Sensitivity adjustment by potentiometer
ATM.ECO - Analog Pressure Transmitter with Temperature Compensation
Pressure Transmitter ATM.ECO - Analog Pressure Transmitter with Temperature Compensation CUSTOMER BENEFITS Entry level series into precision pressure measurement High measurement accuracy is ensured by
Vert-X 28HD - 24V / V. Applications Harvester Public transport Construction machines
Sensor principle MH-C MH-C2 Electrical data Measuring range 0...360 - Indep. linearity % of meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 12 - Max. repeatability 0.1 - Sample rate fast mode khz
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 analog
NOVOHALL Rotary Sensor non-contacting Series RSC2800 analog The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional Hall sensors,
Penny & Giles No-Contact, Rotary Position Sensor NRH271 & NRH272
Penny & Giles No-Contact, Rotary Position Sensor NRH271 & NRH272 No-Contact Hall-effect technology Wear-Free unlimited mechanical life Simple mounting, low-profile design Measurement angle 20-360 5V or
M5200 Industrial Pressure Transducer
SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Compound The M5200 pressure
PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description
Photoelectrics, Background Suppression reflective with IR light Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments.
Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact
Data sheet Electronic timer CT-TGD.12 Pulse generator with 1 c/o (SPDT) contact The CT-TGD.12 is an electronic time relay with the function pulse generator. It is from the CT-D range. With their MDRC profile
BL series Miniature paddle joystick controllers
Distinctive features and specifications Hall effect joystick and switch function Sculpted ergonomic rubber grip 5V operation - standard dual redundant outputs Analog or PWM outputs Custom lever colors
BH series Paddle joystick controllers
Distinctive features and specifications Hall effect joystick and switch function Sculpted ergonomic rubber grip 5V operation - standard dual redundant outputs Analog or PWM outputs Custom lever colors
NOVOTURN Multiturn Sensor non-contacting. Series RSM-2800
NOVOTURN Multiturn Sensor non-contacting Series RSM-2800 Special features Non-contacting, magnetic Long life Electrical range 720 up to 5760 in 360 -steps available (2 to 16 turns) True-Power-On System:
M5800 Pressure Transducer with Rotatable Display
Pressure Transducer with Rotatable Display SPECIFICATIONS Wide Temperature Range Compact Variety of Pressure Ports and customized Electrical Configurations Optional Stainless Steel Snubber CE Compliant
Quadrature Speed and Direction Sensors. SNG-Q Series. Datasheet
Quadrature Speed and Direction Sensors SNG-Q Series Datasheet SNG-Q Series Honeywell s SNG-Q Series Quadrature Speed and Direction Sensor with 4-wire quadrature sensing is the first release of the new
P/N: AX Applications: Typical applications can include: test stands; and industrial automation.
Description: The universal motor controller, 100W, drives a brushed DC Motor up to 6A or a 3- phase BLDC motor up to 6A. It features two SAE J1939 ports. Interfacing with 12V or 24Vdc power, the controller
Pressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
Intrinsically safe pressure transmitter MBS 4201, MBS 4251, MBS 4701 and MBS 4751
Data sheet Intrinsically safe pressure transmitter MBS 420, MBS 425, MBS 470 and MBS 475 The intrinsically safe pressure transmitter program is designed for use in hazardous environments and offers a reliable
Controller for the Implementation of a Central or Decentralized Electrohydraulic System
EFX 1624m Electronic Controller Programmed with Eaton CONTROL F(x) Software to IEC 61131-3 Standard 2nd CAN interface for gateway function according to SAE J1939 Supply voltage 10...32V DC Technical Data
ACTUATOR LA12/LA12 PLC
PRODUCT DATA SHEET ACTUATOR LA12/LA12 PLC Features: 12/24 V DC permanent magnetic motor Max. thrust 75 N Reinforced glass fibre piston rod Compact design Protection class: IPX1 or IP66 Colour: black Straight
Speed sensors for general applications:
Speed Senss speed senss The contact-free speed senss of the HSS series detect the movement of ferromagnetic structures, such as gear wheels, gear rims perfated discs, using the changes in magnetic flux.
Heavy Duty Pressure Transducers
Installation Instructions for the Heavy Duty Pressure Transducers General Information Honeywell s PX3 Series Pressure Transducers use piezoresistive sensing technology with ASIC (Application Specific Integrated
Applications: oil and gas equipment automation; off-highway machine automation; agricultural equipment
Features: 6 Universal Signal Inputs are user configurable as: o 0-5V, 0-10V, 4-20mA or 0-20mA o 20Ω to 250 kω Resistive o 1 Hz to 10 khz PWM o Digital o Three of the inputs can be configured as a pulse
Pressure transmitter for general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter for general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Machine tools Measurement and control technology
TECHNICAL PRODUCT DATASHEET
FORM-ENG-0018 REV A 06-02-03 ISO 9001 CERTIFIED Phone: (352) 629-5020 or 800-533-3569 Fax: (352)-629-2902 SUITABLE FOR OEM DISTRIBUTION ONLY TECHNICAL PRODUCT DATASHEET High Density PDM 21 Output / 10
TECHNICAL DATASHEET #TDAX INPUTS, 5 OUTPUTS VALVE CONTROLLER
TECHNICAL DATASHEET #TDAX020510 6 INPUTS, 5 OUTPUTS VALVE CONTROLLER Up to 6 Digital, Analog or PWM Command Inputs 5 Independent Proportional or On/Off Outputs 1 +5V, 100 ma Reference Voltage CAN (SAE
TECHNICAL DATASHEET #TDAX Universal Input, Single Output Valve Controller CAN (SAE J1939)
Features: TECHNICAL DATASHEET #TDAX021610 Universal Input, Single Output Valve Controller CAN (SAE J1939) 1 universal signal input (voltage, current, resistive, PWM, frequency or digital) 1 output: proportional
Absolute Encoders Multiturn
The Sendix F36 multiturn with the patented Intelligent Scan Technology is an optical multiturn encoder in miniature format, without gears and with 00% insensitivity to magnetic fields. With a size of just
M5200 Industrial Pressure Transducer
CE Compliant Wide Temperature Range Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber Weatherproof Gage, Sealed, Compound DESCRIPTION The M5200 pressure transducers
Installation Instructions for the Transportation Attitude Reference System (TARS Series) Ruggedized Inertial Measurement Unit (IMU)
Installation Instructions for the Transportation Attitude Reference System Ruggedized Inertial Measurement Unit (IMU) Issue B 32332897 1.0 GENERAL INFORMATION Honeywell s Transportation Attitude Reference
Actuator LA12 PRODUCT DATA SHEET
PRODUCT DATA SHEET Actuator LA12 Thanks to its small size and outstanding performance, the actuator LA12 provides a practical and cost-effective alternative to small-scale traditional hydraulic and pneumatic
Electronic timer CT-TGD.22
2CDC 251 097 F0t06 a Rotary switch for the preselection of the time range of the ON time b Potentiometer with direct reading scale for the fine adjustment of the ON time c Rotary switch for the preselection
NOVOHALL Rotary Sensor non-contacting. Series RSC2800 digital SSI, SPI, Incremental
NOVOHALL Rotary Sensor non-contacting Series RSC2800 digital SSI, SPI, Incremental The RSC 2800 sensor utilizes a contactless magnetic measurement technology to determine the measured angle. Unlike conventional
TECHNICAL DATASHEET #TDAX CAN SAE J1939, Dual Output Valve Controller
TECHNICAL DATASHEET #TDAX020200 CAN SAE J1939, Dual Output Valve Controller Features: Two independent, software controlled outputs selectable as: Proportional Current (up to 2.5A); Hotshot Digital; PWM
Pressure transmitter AKS 32 and AKS 33
Data sheet Pressure transmitter AKS 32 and AKS 33 AKS 32 and AKS 33 are pressure transmitters that measure a pressure and convert the measured value to a standard signal: y 1 5 V DC or 0 10 V DC for AKS
OEM pressure transmitter For mobile working machines Model MH-3
Electronic pressure measurement OEM pressure transmitter For mobile working machines Model MH-3 WIKA Data sheet PE 81.59 Applications Load monitoring Load moment limitation Hydraulic drive control Special
Proportional Directional Valves with Feedback KBFDG4V-5-2C75N45-Z-M1-PC7-H7-12-EN123/EN150. Pressures to 315 bar (4500 psi)
Proportional Directional Valves with Feedback KBFDG4V-5-2C75N45-Z-M1-PC7-H7-12-EN123/EN150 Pressures to 315 bar (4500 psi) Contents GENERAL DESCRIPTION... 03 SPOOL DATA... 03 FUNCTIONAL SYMBOL.... 03 MODEL
RADIO REMOTE SYSTEMS
Section / Description page 4-FUNCTIONS PTM RADIO TRANSMITTER... RC4 6-FUNCTIONS PTM RADIO TRANSMITTER... RC5 4/6-FUNCTIONS METER-IN SHW RADIO TRANSMITTER... RC6 CANBUS RADIO RECEIVER... RC7 APPLICATION
Pressure transmitter For general industrial applications Model A-10
Electronic pressure measurement Pressure transmitter For general industrial applications Model A-10 WIKA data sheet PE 81.60 Applications Machine building Ship building Measurement and control technology
TECHNICAL DATASHEET #TDAX021901
TECHNICAL DATASHEET #TDAX021901 8 In, 5 Output Valve Controller 6 Universal Analog Inputs, 1 Digital Input 1 Magnetic Pickup Sensor Input 4-2.5A Proportional or On/Off Outputs 1-2.5A Digital Output CANopen
4/3 Proportional Directional Valve, Size SAE 10
/ Proportional Directional Valve, Size SAE Q max =. gpm [ l/min], p max = psi [ bar] Direct acting, sliding-spool design, with solenoid operation Series PDFC- Description Series PDFC proportional directional
AUTOMOTIVE CURRENT TRANSDUCER FLUXGATE TECHNOLOGY CAB 300-C/SP3-XXX
AUTOMOTIVE CURRENT TRANSDUCER FLUXGATE TECHNOLOGY CAB 300-C/SP3-XXX Introduction The CAB family is for battery monitoring applications where high accuracy and very low offset are required. Features Transducer
Picture. Digital output signal (pressure and temperature) RS-485 Modbus RTU, 9600 bps Protocol details see Data Sheet SW
Type: for level measurement Order No.: see Table 1 / Page 4 Features Picture Four wire system Piezoresistive measuring element Pressure measurement relative or absolute Output signal 4-20 ma and RS-485
Issue D. Installation Instructions for the Quadrature Speed and Direction Sensors SNG-Q Series. Sensing and Internet of Things
Installation Instructions for the Quadrature Speed and Direction Sensors General Information Honeywell s Quadrature Speed and Direction Sensors are designed to provide both speed and direction information.
PRELIMINARY. Preliminary TECHNICAL DATASHEET #TDAX DC MOTOR CONTROLLER P/N: AX100650
Preliminary TECHNICAL DATASHEET #TDAX100650 DC MOTOR CONTROLLER P/N: AX100650 Variable Speed Control, Onboard Inputs 6A DC Motor Output, 2.5A Proportional Output, 2 Signal Outputs CAN SAE J1939, Rugged
EFX IO84 Input/Output Module
EFX IO84 Input/Output Module Input/Output expansion module for EFX Controllers CANopen interface Surface electrostatically coated (cathodic immersion) 10...32V DC Technical Data Housing Dimensions (l x
OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5)
Electronic pressure measurement OEM pressure transmitter for general industrial applications Models O-10 (T), O-10 (5) WIKA data sheet PE 81.65 Applications Hydraulics and pneumatics Pumps and compressors
P/N: AX Applications: Off-highway construction equipment Municipal vehicles. Ordering Part Numbers:
Features: Command messages are received through the CAN network (no physical inputs) 10 universal outputs of up to 2.5A are user selectable from the following types (up to a maximum of 7A of controller
RT200 Series Single-axis Industrial Joystick. RunnTech
Product Features Potentiometer sensor or ; All metal construction, fully sealed design; Available with various shape mulitfunction grips; Mechanical spring-return to center or Friction-hold operation;
TURCK Inc Campus Drive Minneapolis, MN Application Support: PROX Fax: (763)
A Sensor Designed with the Customer Applications in Mind! High Accuracy The PS400 and PS500 provide an accuracy rating of ±0.5 percent of the full scale. Flexible Mounting Options Multiple threaded connections
POSICHRON position sensor in stick design. Protection class. Voltage: V, 3 wire Current: ma, 3 wire
POSICHRON Position Sensor Stick Design with Analog Specifications POSICHRON position sensor in stick design Protection class IP67 Measurement range 0... 100 up to 0... 5750 mm Absolute position measurement
Vert-X 31E - 5V / % Ub. Applications Concrete pump Access control system Fork lift
Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 0... 360 Indep. linearity (typ.) % of meas. range ±0.3 ±0.3 Max. hysteresis 0.1 0.1 Resolution bit 12 14 Max. repeatability 0.1 0.1
Features. Picture. Specifications. Pressure Transmitter 4-20mA 2-wire MPG Type: MPGxxxxxxxx for level measurement Order No.: see Table 1 / Page 4
Type: for level measurement Order No.: see Table 1 / Page 4 Features Picture Two wire system Piezoresistive measuring element Pressure measurement relative or absolute Output signal 4-20 ma, adjustable
with Electronic Assistant
Description: The quad valve controller provides precise, repeatable control of 4 proportional solenoids and 1 on/off solenoid over a SAE J1939 network. PWM signal inputs or analog voltage or current inputs
Pressure transmitter for mobile hydraulic applications With output signals CANopen and J1939
Electronic pressure measurement Pressure transmitter for mobile hydraulic applications With output signals CNopen and J1939 Model MHC-1 WIK data sheet PE 81.49 pplications Construction machinery gricultural
Vert-X 31E - 24V / SPI. Applications Concrete pump Access control system Fork lift
Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 - Indep. linearity (typ.) % of meas. range ±0.3 - Max. hysteresis 0.1 - Resolution bit 14 - Max. repeatability 0.1 - Sample rate fast
T40B. Torque Flange. Special features. Data sheet. Overall concept
T40B Torque Flange Special features - Nominal (rated) torques 50 N m, 0 N m, 200 N m, 500 N m, 1 kn m, 2 kn m, 3 kn m, 5 kn m and kn m - Nominal rated rotational speed up to 24000 rpm (depending on nominal
FEATURES AND BENEFITS. Compact size: 6.5 x 2.8 x 1.5
Single Output Audio Visual Renewable FEATURES AND BENEFITS Automation Broadcast Industrial Display & Signage ITE & Comms Lighting Military COTS Test & Measurement Compact size: 6.5 x 2.8 x 1.5 Meets DoE
Acceleration sensors With relay output for limit monitoring Analog / CANopen
Features Acceleration sensor / analog / CANopen Up to two relay outputs for limit monitoring 3 axes detection, MEMS based Measuring range ±2 g Connection: connector M12, 12-pin Offshore capability (plastic
Smart Power Relay E I...
Smart Power Relay E-48-8I... Description The Smart Power Relay E-48-8I.- is a remotely controllable electronic load disconnecting relay with three functions in a single unit: l electronic relay l electronic
Absolute Encoders - Singleturn
The Sendix 5853 and Sendix 5873 singleturn encoders with SSI or BiSS interface and optical sensor technology can achieve a resolution of max. 7 bits. These encoders are also available with an optional
Wimesure 54, rue de Versailles CHEVREUSE Tél Fax
No-contact, Hall-effect technology Wear free unlimited mechanical life Simple mounting, low-profile design Measurement angle 20-360 5V or 9-30V supply options Dual redundant outputs Analog output 0.5-4.5V
Pressure Transmitter SIL
Pressure Transmitter SI Characteristics - TRANSDUCER - Pressure: Range: Output: Accuracy: Temperature of medium: Material enclosure: Pressure connection: Electrical connection: Protection: relative / absolute
Temposonics. Magnetostrictive Linear Position Sensors. EH IO-Link Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EH IO-Link High pressure resistant sensor rod Operating temperature up to +75 C (+167 F) Small & compact Ideal for standard hydraulic cylinders MEASURING
TECHNICAL DATASHEET #TDAX QUAD VALVE CONTROLLER P/N: AX SERIES
TECHNICAL DATASHEET #TDAX020500 QUAD VALVE CONTROLLER P/N: AX020500 SERIES Multiple Digital, Analog or PWM Command Inputs 4 Independent Proportional Outputs and 1 On/Off Output Standard Open Loop Control
Multi-voltage Multi-function. Wiring diagram (without control signal)
80 Modular timers 16 A 80 Multi-function and mono-function timer range 80.01T - Multi-function & multi-voltage 80.11T - On-delay, multi-voltage Complies with EN 45545-2:2013 (protection against fire of
Temposonics. Magnetostrictive Linear Position Sensors. EH Analog Data Sheet
Temposonics Magnetostrictive Linear Position Sensors EH Analog High pressure resistant sensor rod Position measurement with more than one magnet Small & compact Ideal for standard hydraulic cylinders MEASURING
JAQUET DSD.7x. Dual Channel Hall Effect Speed Sensor for Railway Applications Compliant with EN Product identification.
JAQUET DSD.7x Dual Channel Hall Effect Speed Sensor for Railway Applications Compliant with EN 50155 General Function The speed sensors family DSD.7x are suitable for generating two 90 phase-shifted square
DVC700 Series Programmable System Controller
LC Programmed with HCT s Intella Software Suite 14 I/O (8 inputs & 6 outputs), 1 CAN interface Supply voltage 9-30Vdc The is a robust programmable controller for solenoid-operated proportional valves.
Pressure measurement PBMR Fully welded pressure transmitter for railway applications
Fully welded pressure transmitter for railway Product highlights Ecellent accuracy and long term stability up to % FS Active temperature compensation over the entire operating temperature range Sensor
Rotational Position Sensor, Kit Type, Hall Effect Technology
Rotational Position Sensor, Kit Type, Hall Effect Technology QUICK REFERENCE DATA Sensor type Kit rotational, hall effect Output type Wires Market appliance Industrial Dimensions 48 mm x 43 mm x 12 mm
Vert-X 27E - 5V / % Ub. Applications Harvesting machine Fork lift Hydraulic pump
Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 0... 360 Indep. linearitiy (without misalignment) % of meas. range ±0.3 ±0.3 Indep. linearitiy (with allowed misalignment @ 360 ) %
Rotary Measurement Technology Incremental Encoders
-20 to 60 C Temperature Shock/vibration resistant Short-circuit protection Reverse polarity protection High rotational speed Rugged Balanced, stainless-steel clamping rings, special bearing-shaft connection
RE17RAMU on-delay timing relay - 1 s..100 h V AC - 1 OC
Characteristics on-delay timing relay - 1 s..100 h - 24..240 V AC - 1 OC Complementary Contacts material Control type [Us] rated supply voltage Voltage range Main Range of product Product or component
DVC700 Series Programmable System Controller
Programmed with HCT s Intella Software Suite 23 I/O (14 inputs & 9 outputs), 2 CAN interfaces Supply voltage 9-30Vdc The is a robust programmable controller for solenoid-operated proportional valves. It
Power supply CP-D 24/4.2 Primary switch mode power supply
Data sheet Power supply CP-D 24/4.2 Primary switch mode power supply The CP-D range of modular power supply units in MDRC design (modular DIN rail components) is ideally suited for installation in distribution
FEATURES Heavy Industrial CE Approval 10 V/m EMI Protection Reverse Polarity Protection on Input Short Circuit Protection on Output Up to ±0.1% Accura
SPECIFICATIONS High Accuracy Compact Variety of Pressure Ports and Electrical Configurations Optional Stainless Steel Snubber CE Compliant and Weatherproof Gage, Sealed, Absolute, Compound Expedite Configurations
Electronic Temperature Transmitters
Electronic Temperature Transmitters ELECTRONIC TEMPERATURE TRANSMITTERS As with the pressure transmitters, HYDAC ELECTRONIC also has temperature transmitters appropriate for every application. The transmitters
Vert-X 27E - 24V / 4-20mA. Applications Harvesting machine Fork lift Hydraulic pump
Sensor principle MH-C MH-C2 Electrical data Measuring range 0... 360 0... 360 Indep. linearitiy (without misalignment) % of meas. range ±0.3 ±0.3 Indep. linearitiy (with allowed misalignment @ 360 ) %
Power supply CP-D 12/2.1
2CDC 271 025 F0t07 a OUTPUT ++/ : terminals output Features Rated output voltage 12 V DC Output voltage adjustable via front face potentiometer OUTPUT Adjust Rated output current 2.1 A Rated output power
T40FH. Torque flange. Special features. Data sheet
T40FH Torque flange Special features - Nominal (rated) torques: 100kNm, 125kNm, 150kNm, 200kNm, 250kNm, 300kNm - Nominal (rated) rotational speed of 2000 rpm up to 3000 rpm - Compact design - Version for
DTM.OCS.S/N - Modbus Level Transmitter
Digital Submersible Level Transmitter with Modbus Interface DTM.OCS.S/N - Modbus Level Transmitter CUSTOMER BENEFITS High precision digital level transmitter with standard Modbus interface Fast customization
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY DHAB S/124
AUTOMOTIVE CURRENT TRANSDUCER OPEN LOOP TECHNOLOGY DHAB S/124 Picture of product with pencil Introduction The DHAB family is best suited for DC, AC, or pulsed currents measurement in high power and low
NAT Applications. Features
NAT 85 Industrial Pressure Transmitter Swiss based Trafag is a leading international supplier of high quality sensors and monitoring instruments for measurement of pressure and temperature. The industrial
CP-T range Benefits and advantages
Benefits and advantages Characteristics Rated output voltages V, V DC Output voltage adjustable via front-face rotary potentiometer OUTPUT Adjust Rated output currents 5 A, 10 A, A, A Rated output powers
PD30ETD10xxSA. Photoelectrics, Diffuse reflective. Main features. Description
Photoelectrics, Diffuse reflective Main features Description The PD30ET... stainless steel sensors are built with high-quality materials and designed for harsh environments. They are designed for use in
Temposonics. Magnetostrictive Linear Position Sensors. GB-M / GB-T SSI Data Sheet
Temposonics Magnetostrictive Linear Position Sensors GB-M / GB-T SSI Sensor element and electronics can be changed Flat & compact sensor electronics housing Electrical connection is freely rotatable MEASURING