328 Innovation Blvd. 1 Wheaton Road, Witham

Transcription

1 FEATURES Extremely High Power Density: 600 S-Band 500 X-Band 600 C-Band 250 Ku Band Field Replaceable Subassemblies RF Output Sample Port (-40c) Ethernet Port RF Gain Adjustment (20 ) Built-in 1:1 Redundancy Control OPTIONS DESCRIPTION Paradise Datacom s High Power Outdoor () series SSPAs represent the latest in High Power Microwave Amplifier Technology. The SSPA package achieves the highest power density in the industry along with enhanced maintainability. All subassemblies are accessible and replaceable in the field. Local, front panel, control is available with a user friendly interface. A full compliment of serial and parallel (contact closure) control is also available via circular connectors. A state of the art thermal platform provides efficient cooling for the amplifier module and power supplies. This ensures the highest possible MTBFs for microwave power amplifiers. Along with high reliability comes the ultimate in amplifier maintainability. Amplifier modules and power supplies are easily accessed and removed, making this one of the easiest amplifier assemblies to maintain in the field. RF input sample port (-10 c) 48 VDC operation L-Band Input operation Reflected Power Monitor Phase Combined Systems Fiber Optic Input Antenna Mounting Kit Receive Band Reject Filter for S-Band units up to 400 in sub-band A SPECIFICATIONS Housing: 21.0 X X 13.5 in. 533 X 710 X 343 mm lbs. / 57 kg; hite powder coat finish Operating temperature: -40 to +60 C Relative Humidity: 100% condensing Integrated Forced-Air Cooling Paradise Datacom LLC Paradise Datacom Ltd. 328 Innovation Blvd. 1 heaton Road, itham State College, PA Essex CM8 3UJ England Tel: (814) Tel: +44(0) Fax: (814) Fax: +44(0) OF 6

2 Frequency Range S-Band Output Power Levels Band A Band B to to G G Output Saturation / P 1 Typical / Guaranteed Minimum Prime Input Power Band A HPAS2300AXXXXX ( G) HPAS2300AXXXXX ( G) HPAS2400AXXXXX ( G) HPAS2400AXXXXX ( G) HPAS2500AXXXXX ( G) HPAS2500AXXXXX ( G) HPAS2600AXXXXX ( G) HPAS2600AXXXXX ( G) Band B HPAS2300BXXXXX ( G) HPAS2400BXXXXX ( G) HPAS2500BXXXXX ( G) HPAS2600BXXXXX ( G) Power factor corrected HPAS2300A/BRXXXXX ( VAC) HPAS2400A/BRXXXXX ( VAC) HPAS2500ARXXXXX ( VAC) HPAS2600ARXXXXX ( VAC) P sat /P / 54.5 (316/280) 54.4 / 54.0 (280/250) 56.5 / 56.0 (447/400) 56.0 / 55.5 (400/355) 57.2 / 57.0 (525/500) 56.7 / 56.5 (468/447) 58.0 / 57.5 (631/560) 57.5 / 57.0 (560/500) 55.0 / 54.5 (316/280) 56.5 / 56.0 (447/400) 57.2 / 57.0 (525/500) 58.0 / 57.5 (631/560) C-Band Output Power Levels Frequency Range (see options for extended band) to G Output Saturation/P 1 (Typical/Guaranteed minimum) Power Requirements HPAC2250A HPAC2300A HPAC2400A HPAC2500A HPAC2600A Power Factor corrected Autoranging HPAC2250A (180 to 265 VAC) HPAC2300A (180 to 265 VAC) HPAC2400A (180 to 265 VAC) HPAC2500A (180 to 265 VAC) HPAC2600A (180 to 265 VAC) Psat / P1 53.9/53.0 (250/200) 54.7/54.0 (300/251) 56.0/55.0 (400/316) 57.0/56.0 (500/400) 57.8/57.0 (600/500) > X-Band Output Power Levels Frequency Range (see options for extended band) 7.90 to 8.40 G Output Saturation/P 1 (Typical/Guaranteed minimum) Power Requirements Specifications are subject to change. HPAX2350A HPAX2500A Power Factor corrected Autoranging HPAX2350A (180 to 265 VAC) HPAX2500A (180 to 265 VAC) Psat / P1 55.5/54.5 (354/282) 57.0/55.7 (500/370) > OF 6

3 Common Specifications; HPA_2000X Series Electrical Specifications Gain Gain Flatness Gain Slope Gain Variation vs. Temperature Gain Adjustment range full band Extended C-Band units per 40 M (C-,X-,Ku-bands) per 10 M (S-band) -40 C TO +60 C 0.1 resolution ±1.0 ±1.5 ±0.3 ±0.1 ± /40 M /10 M Intermodulation Distortion 3 back off relative to P 1-25 c AM/PM Conversion (@ rated P 1 ) (@P 1-3) Spurious Harmonics Input/Output VSR (@ rated P 1 ) (@ rated P 1-3) (C-,X-,Ku-bands) (@ rated P 1-3) (S-band) All units except Extended C-Band Extended C-Band units :1 1.50:1 Noise Figure at maximum gain 10 Group Delay (per 40 M segment) Noise Output Residual AM Noise Phase Noise Ku-Band Output Power Levels Frequency Range (see options for extended band) to G Output Power Saturation/P1 (Typical/Guaranteed minimum) Power Requirements Mechanical Specifications HPAK2200A HPAK2250A Power Factor corrected Autoranging HPAK2200A (180 to 265 VAC) HPAK2250A (180 to 265 VAC) Linear Parabolic Ripple TX Band (S-,C-, X- or Ku-Band) RX Band (C- or Ku-Band) RX Band (X-Band) RX Band (S-Band) 0-10 K 10 K K 500 K - 1 M Offset frequency from carrier K 10 K 100 K 1 M Psat / P1 53.0/52.0 (200/158) 54.0/53.0 (250/200) > See options ( log F) -80 Size width X height X depth 21.0 X X X 710 X o / o / c c c ns/m ns/m 2 ns p-p /4 K /4 K /4 K c c c c/ c/ c/ c/ c/ c/ eight 125 (57) lbs.(kg) Finish powder coat white Specifications are subject to change. inches mm 3 OF 6

4 AC IN J7 PARALLEL I/O J5 ETHERNET J9 LINK PORT J4 SITCH PORT J6 SERIAL MAIN J3 +15 VDC OUT J8 RF OUTPUT SAMPLE RF INPUT SAMPLE RF IN J1 RF OUTPUT J2 MODEL: XXXXXXXXXXXX S/N: XXXX P/N: L X Ku-Band Solid State Power Amplifier System High Power Outdoor Extended C-Band to G to G to G Extended X-Band Options De-rate power by 1.0 linearly from to G De-rate power by 1.0 linearly from to G Available in power levels up to to 8.40 G De-rate power by 1.0 linearly from 7.90 to 7.70 G Extended Ku-Band to 14.5 G De-rate power by 1.0 linearly from 14.0 to G Reflected Power Monitor See the configurator for Model numbers for this option. Receive Band Reject Filter (S-Band SSPAs only) Filter integrated into SSPA chassis through 400 Output 500 and 600 SSPAs require external filter. Receive Band Noise Power Density Insertion Loss Rx G Rx G ithout optional filter ith optional filter Model: HPAC2XXXBXXXXX HPAC2XXXCXXXXX HPAC2XXXE/FXXXXX Model: HPAX2XXXDXXXXX Model: HPAC2XXXBXXXXX w/4 K w/4 K 4 OF 6

5 Interface Specifications; HPA_2000X Series Monitor & Control (J5) MS3112E20-41S Mating MS3116E20-41P Main Serial Port (J3) MS3112E12-10P Link Port (J4) MS3112E12-10S Switch Port (J6) MS3112E10-6S RF Connectors AC Input MS3102E20-3P Optional 48 VDC Input MS3102E20A37P Ethernet Port Parallel Port Outputs Form C Relays Contact conditions on fault (Closed, Open, Common) Mute Status RF Switch Position Parallel Port Inputs RS232 / RS485 Summary Alarm Power Supply Fault Auxiliary Fault Mute Status Block Up Converter Fault Temperature Fault Current Fault Low RF Alarm Mute Input Local Remote Auxiliary Fault Input Standby Select Latched Fault Reset Auto/Manual Switching +5V pull-up RS232 Out, RS485 TX- RS232 In, RS485 RX- RS485 RX+ RS485 TX+ Service Request 1 Service Request 2 Service Request Common Termination 1:1 Redundant System Control Link RS485+ RS485- Link Out Link In Redundant Switch Control +28 VDC RF Switch 1, pos 1 RF Switch 1, pos 2 RF Switch 2, pos 1 RF Switch 2, pos 2 RF Input, Input & Output Sample RF Output HPAS2XXXX HPAC2XXXX HPAX2XXXX HPAK2XXXX DC Input Power Remote M&C, UDP, SNMP RJ45 (F) Type N Type N R137 aveguide R112 aveguide R75 aveguide Line Neutral +48 VDC Return TX+ TX- RX+ RX- Environmental Specifications Pins A, B, C Pins D, E, F Pins G, H, J Pins K, L, M Pins N, P, R Pins V,, X Pins a, Y, Z Pin b Pin c Pin d Pin e Pin f Pin g Pins h, I, j, k, m Pin n Pin A Pin B Pin C Pin D Pin E Pin F Pin G Pin H Pin J A, B C, D E, F G, H Pin J A, B C E D F Female Female CPR137G flange (PDR-70) CPR112G flange (PDR-84) Grooved flange (PBR-120) A C B A,B C,D ,5,7,8 Operating Temperature Ambient -40 to +60 C Relative Humidity Condensing 100 % Cooling System Integrated Forced air 5 OF 6

6 Band S - S-Band C - C-Band X - X-Band K - Ku-Band HPA Power Level (in atts) S-Band 300, 400, 500 or 600 C-Band 250, 300, 400, 500 or 600 X-Band 350 or 500 Ku-Band 200 or 250 Frequency Sub Band S-Band A G B G C-Band A* G B* G C G E* G (Palapa) F* G (Insat) G* G X-Band A* G B G D G E G Ku-Band A* G B* G * Available with optional BUC Part Number Configuration 2 Configuration Modifier XXX = Standard SXX = Input Sample XVX = Reflected Power Monitor XXR* = Receive Band Reject Filter * S-Band only System Configuration X = Standalone See the following specification sheets for the appropriate configuration: Outdoor Packaged Redundant SSPA Systems (203581) Outdoor Packaged Phase Combined SSPA Systems (203582) Block Up Converter B = BUC (Custom) M = Internal Reference ZBUC (FSK) P = External Reference ZBUC (FSK) X = None An optional uni-strut mounting kit is available. Example - A standalone 500 Extended C-Band High Power Outdoor SSPA with block up converter using an external reference is part number: HPAC2500BPXXXX. 6 OF 6