150W Ku-Band Compact Outdoor 1:1 Redundant System. 328 Innovation Blvd., Suite 100 2&3 The Matchyns, London Road, Rivenhall End

Transcription

1 150W Compact Outdoor 1:1 Redundant System DESCRIPTION Teledyne Paradise Datacom s Outdoor series of redundant amplifier systems provide the highest degree of earth station redundancy and reliability. Based on Teledyne Paradise Datacom s family of rugged and robust SSPAs, these systems provide the highest MTBFs possible. These systems can be configured in either 1:1 or 1:2 redundant configurations using any of the Teledyne Paradise Datacom family of Outdoor SSPAs. The RCP2-1100/1200 Redundant Controller provides an extremely user-friendly interface for complete monitor and control of the high power amplifiers in either 1:1 or 1:2 configurations. The RCP front panel mimic display shows the on-line amplifiers and the current switch positions. Dedicated fault lights provide easy indication of system status. All RCP2-100 monitor and control is available locally, at the front panel LCD display, as well as remotely by the RS-232 or RS-485 interface ports. FEATURES System Output Power to: 1000W S-Band; 800W ; 800W -Band; 400W Universal Input, Power Factor Corrected Power Supply Output Power Monitoring Separate 1RU Redundant Controller or Controllerless configurations OPTIONS System Output Power Monitor Reflected Power Alarm L-Band Input Operation Cold Standby Amplifier Operation Custom Configurations Teledyne Paradise Datacom Teledyne Paradise Datacom Ltd. 328 Innovation Blvd., Suite 100 2&3 The Matchyns, London Road, Rivenhall End State College, P Witham, Essex CM8 3HA England Tel: (814) Tel: +44(0) Fax: (814) Fax: +44(0) O2

2 High Power Outdoor Output Power Ranges Band GaAs (W) GaN (W) S-Band N/A 600-1kW Band See document # for GaAs High Power Outdoor SSPAs, and document # for GaN High Power Outdoor SSPAs Compact Outdoor Output Power Ranges Band GaAs (W) GaN (W) S-Band N/A Band See document # for GaAs Compact Outdoor SSPAs, and document # for GaN Compact Outdoor SSPAs System Output Power Capacity Due to residual losses inherent in redundant system configurations (waveguide bends; switch and coupler losses), reduce the typical output power specification of a single amplifier by approximately 0.2 for 1:1 and by 0.4 for 1:2 systems. For example, a single thread 100W Compact Outdoor SSPA has a typical saturated output power of 50.0 (100W). Placing two of the above amplifiers in a 1:1 redundant system configuration would reduce the typical system saturated output by 0.2 to 49.8 (96W). Placing three of the above amplifiers in a 1:2 redundant system configuration would reduce the typical system saturated output by 0.4 to 49.6 (91W). Actual system losses will vary based on the system options. 2 O2

3 General Specifications PARAMETER NOTES LIMITS UNITS Gain Gain Flatness Gain Slope Gain Variation vs. Temperature Gain Stability Gain Adjustment minimum full band (all except Extended ) Extended units per 40 MHz (C-, -, s) per 10 MHz (S-Band) -40 to +55 C at constant temperature 0.1 resolution 70 ± 1.0 ± 1.5 ± 0.3 ± 0.2 ± 1.0 ± /40 MHz /10 MHz /24 hours Intermodulation Distortion 3 back off relative to P 1-25 c AM/PM Conversion (@ rated P 1 ) (@P 1-3 ) Spurious Harmonics Input/Output VSWR Noise Figure Group Delay (per 40 MHz segment) Transmit Band Noise Output Power Density Receive Band Noise Output Power Density Residual AM Noise Phase Noise Environmental (@ rated P 1 ) (@ rated P 1-3 ) (C-,-,Ku-bands) (@ rated P 1-3 ) (S-band) (Extended with 1.3:1 VSWR option) at maximum gain (C-,-,Ku-bands) at maximum gain (S-band) Linear Parabolic Ripple T Band R Band (C- or Ku-bands) R Band (-Band) R Band (S-Band) S-Band, with optional filter S-Band, without optional filter 0-10 KHz 10 KHz KHz 500 KHz - 1 MHz Offset frequency from carrier 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz :1 1.30: See options ( log F) / / c c c ns/mhz ns/mhz 2 ns p-p W/4 KHz W/4 KHz W/4 KHz W/4 KHz W/4 KHz c c c Operating Temperature Ambient -40 to +60 C Relative Humidity condensing 100 % Cooling System Integrated Forced air Mechanical Size, High Power Outdoor, single Size, Compact Outdoor, single Weight, High Power Outdoor, single Weight, Compact Outdoor, single width length height width length height Base unit (<200W S/C-bands; <100W Ku) Base unit ( 200W S/C-bands; 100W Ku) Base unit (<200W -Band) Base unit ( 200W -Band) With Internal zbuc (45.5) 36 (16.4) ± 3% 44 (20.0) ± 3% 46.7 (21.1) ± 3% 54.9 (25.0) ± 3% +1.7 (0.8) c/hz c/hz c/hz c/hz c/hz c/hz inches mm inches mm lbs. (kg) lbs. (kg) lbs. (kg) lbs. (kg) lbs. (kg) lbs. (kg) Finish Paint White; powder coat 3 O2

4 L-Band Operation Teledyne Paradise Datacom amplifiers are available with an integrated L-Band Block Up Converter. L-Band units utilize Teledyne Paradise Datacom s proprietary zbuc technology. Adding a zbuc converter to an SSPA typically increases the gain by 2-4. In addition: the zbuc converter can detect and switch to an extenally supplied reference. an optional internal high stability (10MHz) reference is available. the zbuc converter can lock to an externally supplied reference of 10 or 50 MHz. the zbuc converter can accept a wide range of external reference power (-10 to +5 m) the zbuc converter can accept FSK monitor and control signal via the IFL. Electrical Specifications for Outdoor SSPA with ZBUC converter PARAMETER NOTES LIMITS UNITS Gain Gain Flatness Gain Slope Gain Adjusted Range Gain Stability Phase Noise Spurious Nominal setting full band (C-,-,Ku-bands) per 40 MHz (C-,-,Ku-bands) Typical Adj. Range Typical Adj. Range -40 to +60 C Offset frequency from carrier 10 Hz 100 Hz 1 KHz 10 KHz 100 KHz 1 MHz Available Frequency Plans Band Model Number IF Input LO Frequency RF Output C Sub-Band A MHz GHz GHz C Sub-Band B MHz GHz GHz C Sub-Band C MHz GHz GHz C Sub-Band E MHz GHz GHz C Sub-Band F MHz GHz GHz C Sub-Band G MHz GHz GHz C Sub-Band L MHz GHz GHz Sub-Band A MHz GHz GHz Ku Sub-Band A MHz GHz GHz Ku Sub-Band B MHz GHz GHz Ku Sub-Band D MHz GHz GHz Ku Sub-Band F MHz GHz GHz Absolute max In-Band Signal Related (C-/) (Extended ) Close to Carrier Spurious ( 20 MHz) Local Oscillator C-band (typ.) ± 2.0 ± ± 1.5 -band (typ.) Ku-band (typ.) /40 MHz c/hz c/hz c/hz c/hz c/hz c/hz c c c m Noise Figure At Maximum gain 20 Transmit Band Noise Output Power Density Tx Band at Maximum gain -65 W/4kHz Input VSWR L-Band 1.5 : 1 Internal Reference Option Reference Accuracy (initial) Aging per day (after 30 days) ± ± Aging per year (after 30 days) ± Reference Stability over Temperature (-40 to +40 C, ambient) ± O2

5 Amp 1 RF IN-POL 1 Amp 2 RF OUT-POL 1 RF IN-POL 2 Amp 3 RF OUT-POL 2 1:1 Redundant HPA System 1:2 Redundant HPA System Teledyne Paradise Datacom s Outdoor Packaged Redundant Systems are designed with built -in redundancy for 1:1 systems. All system-level monitor and control is internal and no separate controller is required, although an optional RCP :1 Redundant System Controller is available. Either Ethernet or RS-485 communications are selectable for user monitor and control. All 1:2 redundant systems require a separate RCP Redundant System Controller. RCP :1 Redundant System Controller RCP :2 Redundant System Controller The RCP :2 Redundant System Controller is the heart of the 1:2 redundant system. It provides an extremely user friendly interface for complete monitor and control of the high power amplifiers. The front panel mimic display shows the on-line amplifiers and the current switch positions. Dedicated fault lights are provided for easy indication of system status. All Redundant System Controller monitor and control is available locally, at the front panel LCD display, as well as remotely by the RS-232, RS-485 or Ethernet interface ports. Audible alarms and a full compliment of parallel I/O signal are available at the rear panel. 5 O2

6 Outline Drawing, 1:1 High Power Outdoor SSPA System with RCP O2

7 Outline Drawing, 1:2 Compact Outdoor SSPA System with RCP O2

8 PARADISE DATACOM RCP :1 REDUNDANT SYSTEM CONTROLLER Redundant Systems MODEL: S/N: P/N: L- RF OUT J2 J2 Outline Drawing, 1:1 Compact Outdoor SSPA System with RCP O2

9 Part Number Configuration Matrix, GaAs High Power Outdoor Systems HPA C A H M B S Band -Band C K Power Level (Watts) 400, 500, 600 -Band 350, , 250 Frequency Sub Band C 1 E 1 G 1 H J D to GHz to GHz to GHz to GHz to GHz to GHz to GHz to GHz -Band 7.90 to 8.40 GHz 7.70 to 8.40 GHz to GHz to GHz to GHz 1 Available with optional BUC Generation Second 2 B R 1 V Y 1 M P Configuration Modifier 3 Block Up Converter Internal Reference BUC External Reference BUC No BUC None () Configuration Modifier 2 Receive Band Reject Filter Reflected Power Monitor R + V (see above) 1 -Band units only Configuration Modifier 1 S Input Sample Port System Configuration 1:1 System, Input Switching, Internal control 1:1 System, Input Splitter, Internal control C 1 1:2 System, Input Switching, RCP :1 System, Input Splitter, RCP H 1 1:1 System, Input Switching, RCP Input switching with an external reference BUC requires a reference distribution box. 2 cable length of 100 ft. (30m) with RCP unit. H Package High Power Outdoor SSPA Example - :1 Redundant System with Input Splitting and Internal Redundancy Control, using two (2) 400W GaAs High Power Outdoor SSPAs with optional input sample ports and optional internal reference block up converters is part number: HPAC2400AHMBS. 9 O2

10 Part Number Configuration Matrix, GaN High Power Outdoor Systems HPA C A H M B G Band GaN Device Designator S-Band S G GaN Technology -Band C K Generation Second 2 Configuration Modifier 3 None () Power Level (Watts) S-Band 600, 800, 1000 (10K) 650, 800 -Band 650, , 400, 500 Frequency Sub Band A B G C 1 E 1 H L 1 D F C D 1 G S-Band 2.02 to 2.12 GHz 2.20 to 2.30 GHz 1.75 to 2.12 GHz to GHz to GHz to GHz to GHz to GHz to GHz to GHz -Band 7.90 to 8.40 GHz 7.70 to 8.40 GHz 7.10 to 7.40 GHz to GHz to GHz to GHz to GHz to GHz to GHz 1 Available with optional BUC R 1 V Y 1 Configuration Modifier 2 H Receive Band Reject Filter Reflected Power Monitor R + V (see above) 1 S-Band and -Band units only Configuration Modifier 1 S M P Input Sample Port System Configuration 1:1 System, Input Switching, Internal control :1 System, Input Splitter, Internal control C 1 1:2 System, Input Switching, RCP :1 System, Input Splitter, RCP H 1 1:1 System, Input Switching, RCP Input switching with an external reference BUC requires a reference distribution box. 2 cable length of 100 ft. (30m) with RCP unit. Block Up Converter Internal Reference BUC External Reference BUC No BUC Package High Power Outdoor SSPA Example A 800W GaN (5.85 to GHz) 1:1 Redundant High Power Outdoor SSPA System with input splitting, an internal reference block up converter and internal redundancy control is model number: HPAC2800AHMBG. 10 O2

11 Part Number Configuration Matrix, GaAs Compact Outdoor Systems HPA K A C M B Band -Band C K Generation Second 2 A D F Configuration Modifier 3 None () Side-mount AC Input, Location A 48 VDC Input Side-mount 48 VDC Input, Location A Power Level (Watts) 030, 040, 050, 075, 100, 140, 200, 250, , 030, 060, 075, 100, -Band 140, 200, , 020, 025, 035, 040, 050, 070, 100, 125 Frequency Sub Band C 1 E 1 G 1 H J V 1,2 B D to GHz to GHz to GHz to GHz to GHz to GHz to GHz to GHz to GHz -Band 7.90 to 8.40 GHz 7.50 to 8.50 GHz 7.70 to 8.40 GHz to GHz to GHz 1 Available with optional BUC 2 With 1.3:1 VSWR C Package Compact Outdoor SSPA M R 1 S Configuration Modifier 2 MS-Connector Covers Receive Band Reject Filter M + R (see above) 1 -Band units only Configuration Modifier 1 K M P 110 VAC Input 1 Available in C- and -Band models 140W and models 100W System Configuration 1:1 System, Input Switching, Internal control :1 System, Input Splitter, Internal control C 1 1:2 System, Input Switching, RCP :1 System, Input Splitter, RCP H 1 1:1 System, Input Switching, RCP Input switching with an external reference BUC requires a reference distribution box. 2 cable length of 100 ft. (30m) with RCP unit. Block Up Converter Internal Reference BUC External Reference BUC No BUC Example A 70W GaAs (14.0 to 14.5 GHz) 1:1 Redundant Compact Outdoor SSPA System with input splitting, an internal reference block up converter, and internal redundancy control is model number: HPAK2070ACMB. 11 O2

12 Part Number Configuration Matrix, GaN Compact Outdoor Systems HPA A C M C G Band S-Band S C -Band Generation K Second 2 Power Level (Watts) S-Band 050, 100, 200, 300, 400, , 400 -Band 300, , 150, 200, 250 Frequency Sub Band GaN Device Designator G GaN Technology Configuration Modifier 3 None () A Side-mount AC Input, Location A Configuration Modifier 2 M MS-Connector Covers R 1 S Receive Band Reject Filter M + R (see above) 1 S-Band and -Band units only A B G C 1 E 1 H L 1 D F G S-Band 2.02 to 2.12 GHz 2.20 to 2.30 GHz 1.75 to 2.12 GHz to GHz to GHz to GHz to GHz to GHz to GHz to GHz -Band 7.90 to 8.40 GHz 7.70 to 8.40 GHz 7.10 to 7.40 GHz to GHz to GHz to GHz to GHz 1 Available with optional BUC C Package Compact Outdoor SSPA Configuration Modifier 1 M P System Configuration 1:1 System, Input Switching, Internal control :1 System, Input Splitter, Internal control C 1 1:2 System, Input Switching, RCP :1 System, Input Splitter, RCP H 1 1:1 System, Input Switching, RCP Input switching with an external reference BUC requires a reference distribution box. 2 cable length of 100 ft. (30m) with RCP unit. Block Up Converter Internal Reference BUC External Reference BUC No BUC Use and Disclosure of Data The items described herein are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations. Proprietary and Confidential The information contained in this document is the sole property of Teledyne Paradise Datacom. Any reproduction in part or as a whole without the written permission of Teledyne Paradise Datacom is prohibited. Specifications are subject to change without notice. 12 O2