STORE BACKGROUND AUDIO SYSTEM. commercial media systems. MOOD: Amplifier Pre-amplifier MOOD: Ceiling Speakers* For use by trained installers only

Transcription

1 commercial media systems UK B1 BACKGOUND AUDIO SYSTEM MOOD: Amplifier Pre-amplifier MOOD: Ceiling Speakers* For use by trained installers only * Package may contain 2, 4 or 6 speakers, depending on system ordered. Customer services

2 technical specification AMPIFIE PE-AMPIFIE DESCIPTION This compact format provides 30 W with low impedance and 100 V line outputs. It is fitted with a priority balanced microphone input remote controllable with dry contact, a balanced microphone input, an input and a input. The 3-band equalizer provides a perfect tone equalization. SPECIFICATION Output power 30W Voltage/Impedance 11 V/4 Ω 15 V/8 Ω 22 V/16 Ω 70 V/133 Ω 100 V / 333 Ω Bandwidth 100 Hz to 20 khz Signal/noise ratio > 60 db Distortion < 2,5 % Bass/Treble equalization +/- 10 db Power supply with 220 V mains. Input sensitivity Bass/Treble equalization Dimensions Weight MIC input: 1 mv/600 Ω input: 200 mv/50 kω MIC input: 500 mv/50 kω 150 Hz, 1 khz and 6 khz +/-10 db 270 x 75 x 230 mm 4.3 kg Amplifier rear panel 230V - 50HZ MIC 2 MIC 1 ohs PIOITY COM V UNBAANCED BAANCED

3 ON OFF installation guide EXAMPE INSTAATION Music source Music output from AUDIO output Pb CYBS Zone 2/ Py Y Zone 1/ VIDEO AUDIO S-VIDEO SPDF HDMI NETWOK USB SD POWE Amplifier Music input to PIOITY COM V Speaker set 100V Speaker set daisy chain Disclaimer MOOD: cannot be held responsible for any error in the installation of its products. If in doubt you are advised to contact a qualified electrician. Your consumer rights are unaffected.

4 technical specification CEIING SPEAKE DESCIPTION An elegant ceiling speaker which integrates perfectly into the majority of settings. It is equipped with a 14 cm diameter speaker, a high quality 100V line transformer, and with easy to use terminals making installation easy. The fixing bracket allows it to be ceiling mounted. SPECIFICATION Weight Diameter / fitting size Height Sensitivity 1W/1m Bandwidth 1,28 kg 200 mm / 175mm 120mm 90 db 100 Hz - 16 khz 100 V line Power (w) 0.5/1/2/4/6 W / 8 Ω Peak Power (w) Nominal Power (w) Body & Grill 15 W 6 W ABS Metal white

5 installation guide CEIING SPEAKE DAISY-CHAINING MOE THAN ONE SPEAKE AND CONNECTING TO THE AMPIFIE Example A series of up to six speakers can be daisy-chained together by wiring to the correct terminals. The correct terminals will be determined by the number of speakers installed and their total power output. Please see Important information regarding speaker power output below. Detail - amplifier rear Detail - speaker rear Speaker connection within chain Detail - speaker rear Speaker connection at end of chain PIOITY COM V Detail - amplifier front MIC 1 MIC 2 MIXE AMPIFIE / 150 Hz 1 KHz 6 KHz MASTE VOUME POWE Plug your music player into the socket Make sure the switch is set to Important information regarding speaker power output The total power output of the combined number of speakers must not exceed the power output of the amplifier used. Each speaker s impedance can be tapped or set at the back with a screw to the appropriate wattage setting and wired to corresponding terminals. Examples For a 30 watt amplifier 6 x speakers tapped at 5w each (or less) 4 x speakers tapped at 7.5w each (or less) 2 x speakers tapped at 15w each (or less) For a 60 watt amplifier 6 x speakers tapped at 10w each (or less) 4 x speakers tapped at 15w each (or less) 2 x speakers tapped at 30w each (or less) Important information regarding speaker cabling All speaker sets are supplied with a 0.75mm 2 core low smoke and fume cable which is required in many new installations for increased safety. Speaker packages will come with cable lengths appropriate to number of speakers and intended package area. Disclaimer MOOD: cannot be held responsible for any error in the installation of its products. If in doubt you are advised to contact a qualified electrician. Your consumer rights are unaffected.