Lotus Automation (Ireland) Ltd. Trading As. LotusWorks. Building 3, Finisklin Business Park, Sligo. Calibration Laboratory Registration number: 277C

Transcription

1 Lotus Automation (Ireland) Ltd Trading As LotusWorks Building 3, Finisklin Business Park, Sligo Calibration Laboratory Registration number: 277C is accredited by the Irish National Board (INAB) to undertake calibration as detailed in the Schedule bearing the Registration Number detailed above, in compliance with the International Standard ISO/IEC 17025: nd Edition General Requirements for the Competence of Testing and Calibration Laboratories (This Certificate must be read in conjunction with the annexed Schedule of ) Date of award of accreditation: 07:12:2010 Date of last renewal of accreditation: 20:10:2015 Expiry date of this certificate of accreditation: 20:10:2020 This shall remain in force until further notice subject to continuing compliance with INAB accreditation criteria, ISO/IEC and any further requirements specified by the Irish National Board. Manager: Dr Adrienne Duff Issued on 20 October 2015 Chairperson: Mr Tom O Neill Organisations are subject to annual surveillance and are re-assessed every five years. The renewal date on this Certificate confirms the latest date of renewal of accreditation. To confirm the validity of this Certificate, please contact the Irish National Board. INAB is a signatory of the European co-operation for (EA) Testing Multilateral Agreement (MLA) and the International Laboratory Cooperation (ILAC) Mutual Recognition Arrangement. Edition 11, 31/08/ C Page 1 of 12

2 Schedule of (Annex to Certificate) Category A, B Electrical, Temperature, Balance and Volumetric Calibration Laboratory Initial Date : 14-December-2010 Postal Address: Building 3, Finisklin Business Park, Sligo Telephone: +353 (0) Fax: +353 (0) nmolloy@lotusworks.com Contact Name: Noel Molloy Facilities: Public calibration service Edition 11, 31/08/ C Page 2 of 12

3 Schedule of Category A THE IRISH NATIONAL ACCREDITATION BOARD (INAB) is the Irish body for the accreditation of organisations including laboratories. Laboratory accreditation is available to testing and calibration facilities operated by manufacturing organisations, government departments, educational institutions and commercial testing/calibration services. Indeed, any organisation involved in testing, measurement or calibration in any area of technology can seek accreditation for the work it is undertaking. Each accredited laboratory has been assessed by skilled specialist assessors and found to meet criteria which are in compliance with ISO/IEC or ISO (medical laboratories). Frequent audits, together with periodic inter-laboratory test programmes, ensure that these standards of operation are maintained. Calibration Categories: Category A: Permanent calibration laboratory where the laboratory is erected on a fixed location for a period expected to be greater than three years. Category B: Category C: Category D: Site calibration that is performed by staff sent out on site by a permanent laboratory that is accredited by the Irish National Board. Site calibration that is performed in a site/mobile laboratory or by staff sent out by such a laboratory, the operation of which is the responsibility of a permanent laboratory accredited by the Irish National Board. Site calibration that is performed on site by individuals and organisations that do not have a permanent calibration laboratory. Calibration may be performed using (a) (b) (c) (d) portable test equipment a site laboratory a mobile laboratory or equipment from a mobile or site laboratory Standard Specification or Calibration Procedure Used: The standard specification or calibration procedure that is accredited is the issue that is current on the date of the most recent visit, unless otherwise stated. Glossary of Terms Facilities: Public calibration service: Conditionally available for public calibration: Normally not available for public calibration: Commercial operations which actively seek work from others. Established for another primary purpose but, more commonly than not, is available for outside work. Unavailable for public calibration more often than not. Laboratory users wishing to obtain assurance that calibration results are reliable and carried out to the Irish National Board criteria should insist on receiving an accredited calibration certificate. Users should contact the laboratory directly to ensure that this schedule of accreditation is current. INAB will on request verify the status and scope. Edition 11, 31/08/ C Page 3 of 12

4 Electrical Calibration Laboratory DC Voltage mv to mv V to V V to V V to V V to V Range of measurement Calibration and measurement capability expressed as an ± V to V ± V to V ± V to V ± V to V ± V to 0.08 V Documented inhouse method: Negative DC Voltage mv to mv mv to V V to V V to V V to V ± V to V ± V to V ± V to V ± V to V ± V to 0.08 V AC Voltage mv to 3.000V 10 Hz 3 khz ± V to V mv to V mv to V mv to V mV to V 3 khz 10 khz 10 khz 30 khz 30 khz 50 khz 50 khz 100 khz ± V to V ± V to V ± V to V ± V to V Edition 11, 31/08/ C Page 4 of 12

5 Electrical Calibration Laboratory Range of measurement Calibration and measurement capability expressed as an AC Voltage Documented in-house method: V to V 10 Hz 3 khz ± V to V V to V 3 khz 10 khz ± V to V V to V 10 khz 30 khz ± V to V V to V 30 khz 50 khz ± V to V V to V 50 khz 100 khz ± V to 0.14 V V to V 10 Hz 3 khz ± V to V V to V 3 khz 10 khz ± V to V V to V 10 khz 30 khz ± V to V V to V 30 khz 50 khz ± V to 0.18 V V to V 50 khz 100 khz ± 0.14 V to 0.46 V V to V 10 Hz 3 khz ± V to V V to V V to V V to V V to V 3 khz 10 khz 10 khz 30 khz 30 khz 50 khz 50 khz 100 khz ± V to V ± V to 0.1 V ± 0.18 V to 0.19 V ± 0.46 V to 0.47 V Edition 11, 31/08/ C Page 5 of 12

6 Electrical Calibration Laboratory AC Voltage Range of measurement Calibration and measurement capability expressed as an Documented inhouse method: V to V 40 Hz Hz ± V to 0.17 V V to V 100 Hz 3 khz ± V to 0.26 V V to V 3 khz 10 khz ± 0.12 V to 0.27 V V to V 10 khz 30 khz ± 0.12 V to 0.51 V V to V 10 khz 30 khz ± 0.27 V to 0.71 V V to V 40 Hz -100 Hz ± 0.23 V to 0.44 V V to V 100 Hz 3 khz ± 0.23 V to 0.66 V V to V 3 khz 10 khz ± 0.33 V to 0.71 V V to I kv 40 Hz 10 khz ± 0.44 V to 1 V DC Current A to ua ± A ma to ma ± A to A ma to ma ± A to A ma to ma ± A to A ma to A ± A to A A to A ± A to A Edition 11, 31/08/ C Page 6 of 12

7 Electrical Calibration Laboratory Range of measurem Calibration and measurement capability expressed as an AC Current Documented in ua to ma 10 Hz - 3 khz ± A to A house method: ma to ma 10 Hz - 3 khz ± A to A ma to ma 10 Hz - 3 khz ± A to A A to A 40 Hz - 3 khz ± A to A A to A 3 khz - 10 khz ± A to 0.01 A A to A 40 Hz - 3 khz ± A to A A to A 3 khz - 10 khz ± 0.01 A to 0.06 A Resistance Ω to Ω ± 0.01 Ω to 0.02 Ω Ω to Ω ± Ω to Ω K Ω to K Ω ± Ω to 0.65 Ω K Ω to K Ω ± 0.65 Ω to 8.4 Ω K Ω to K Ω ± 8.4 Ω to 76 Ω M Ω to M Ω ± 76 Ω to Ω M Ω to M Ω ± Ω to Ω M Ω to M Ω ± Ω to Ω Frequency V ± Hz V ± 2.5 Hz Edition 11, 31/08/ C Page 7 of 12

8 Electrical Calibration Laboratory Range of measurem Calibration and measurement capability expressed as an Documented in- AC Current Turn Coil 30A 100A 30A 500A 95Hz 95Hz 440Hz 440Hz ± 0.14A ± 0.5A ± 0.33A ± 1.1A house method Capacitance nf to nf ± F to F nf to nf ± F to F nf to nf ± F to F nf to μf ± F to F μf to μf ± F to F μf to μf ± F to F μf to mf ± F to F mf to mf ± F to F Edition 11, 31/08/ C Page 8 of 12

9 Electrical Calibration Laboratory The following types of instrument can be calibrated in accordance with the scheduled measured quantities and ranges. An uncertainty reported on an INAB certificate will be that for the instrument itself during calibration plus the appropriate measurement capability of the laboratory for the quantities and ranges concerned. Instrument 302 Resistors and resistance boxes Resistors, resistance boxes. 303 Insulating materials and insulators Insulation Resistance tests Direct voltage tests Alternating voltage tests 309 Instrument Calibrators DC Voltage AC Voltage DC Current AC Current Resistance 310 Indicating and Recording Instruments DC Voltmeters AC Voltmeters DC Ammeters AC Ammeters Ohmmeters Electricity meters Digital Multimeters 312 Frequency Frequency Meters 321 Power Supplies Power Supplies Edition 11, 31/08/ C Page 9 of 12

10 Temperature Calibration Laboratory Range of measurem Calibration and measurement capability expressed as an 501 Calibration of temperature measuring equipment -100ºC to 180ºC ± 0.028ºC to 0.04ºC QLP 103 A+B.41 DTI Calibration and - 80 o C to + 30 o C ± o C to o C temperature element + 30 o C to o C ± o C to o C calibration +150 o C to o C ± o C to 0.18 o C 510 Testing of temperature controlled enclosures -100ºC to + 30 ºC ± 0.04ºc to 0.036ºC QLP o C to o C ± o C to o C.01 Temperature bath +145 o C to o C ± 0.04 o C to 0.20 o C calibration Ovens and furnaces Incubators Industrial freezers -90ºC to 0ºC 0ºC to 140ºC ± 0.5ºC to 0.25ºC ± 0.25ºC to 0.5ºC QLP-129 Category A+B Edition 11, 31/08/ C Page 10 of 12

11 Balance Calibration Laboratory Range of measurem Calibration and measurement capability expressed as an 121 Weighing Devices.01 Precision laboratory 1 mg - 5 g ± mg QLP 128 A+B balances 5 g - 20 g ± mg 20 g g ± 0.19 mg.02 Industrial balances 20 g - 1 kg ±1.3 mg 1 kg - 20 kg ±25 mg.03 Industrial weighing 20 kg kg ± 2.0 g appliances 100.kg kg ± 6.0g Edition 11, 31/08/ C Page 11 of 12

12 Volumetric Calibration Laboratory Range of measurem Calibration and measurement capability expressed as an 130 Volumetric Equipment Documented in-house method:.02 Special laboratory 1-10 µl ± 0.15 µl QLP 127 based on volumetric apparatus µl ± 0.20 µl ISO 8655 Single channel pipettes µl ± 0.35 µl For water delivered µl ± 0.80 µl from piston and/or µl ± 2.5 µl plunger operated µl ± 4.5 µl volumetric µl ± 12 µl apparatus ,000 µl ± 22 µl 5,000-10,000 µl ± 51 µl Edition 11, 31/08/ C Page 12 of 12