NEXT Lab Semiconductor Development Group
|
|
|
- Brendan Morgan
- 6 years ago
- Views:
Transcription
1 Semiconductor Development Group NXM bit Resolution VCM driver IC with I2C interface General Description The NXM5003 is single 10-bit decoder with 120mA output current sink capability. It includes power-on reset circuit, power-down function, and exactly matched driver circuit. The decoder is controlled via a I2C serial interface that operates decoder by clock rates up to 400kHz. The NXM5003 is designed for auto focus and optical zoom camera phones, digital still cameras, and camcorders applications. Feature Supply voltage : 2.3V ~ 3.6V VCM driver for auto-focus 10bit decoder 120mA output current sink capability VCM Smart Transition Control(STC) Fast mode I2C interface (1.8V interface available) Power on reset (POR) Package : 0.75mm(W) X 1.15mm(H) 6pin-WLP Application Digital camera Cell Phones Lens auto focus Web camera - 1 -
2 Block Diagram XSD POR SCl I2C Interface 10bit decoder Driver IOUT VSS Pin assignments IOUT 1 4 XSD XSD 4 1 IOUT VSS VSS Top view Bottom view Pin description Pin Name Pin No. I/O Description IOUT 1 O Output current sink VSS 2 Ground 3 Power supply 4 I/O Serial data 5 I Serial Clock Line XSD (1) 6 I Shutdown mode (active low) (1) XSD : Shutdown mode (active low) 1 : Normal operation mode 0 : Shutdown mode - 2 -
3 Maximum Absolute Rating Parameter Symbol Value unit Supply Voltage -0.3 ~ 4.5 V Control input voltage Vin -0.3 ~ +0.3 V Human body model Vhbm 2 KV Machine model Vmm 200 V Operating temperature range Topr -40 ~ 85 Junction temperature Tj 150 Electrical Characteristics V = 2.3V to 3.6V, Vin = 1.8V to, Ta=25 Unless otherwise noted Characteristics Symbol Conditions Min Typ Max unit Overall Input Voltage Range V Shutdown mode ISD XSD = Low 1 ua IQ 1 XSD = High, PD = HIgh ma Quiescent mode IQ 2 Data = ma IQ 3 Data = ma Logic input / output (XSD) Input current 1 ua Low Level Input Voltage VIL 0.54 V High Level Input Voltage VIH 1.26 V Logic input / output (, ) Input current 1 ua Low Level Input Voltage VIL 0.54 V High Level Input Voltage VIH 1.26 V Low Level Output Voltage VOL I sourcing = 3mA() 0.4 V Glitch rejection 50 ns VCM driver Current resolution uA/LSB 10 Bits INL INL = 2.8V LSB DNL DNL LSB Zero code error ZCE Zero data loaded to decoder 1 ua IOUT compliance voltage Output current = 120mA 100 mv Maximum output current Imax ma Power on time 0.5 ms - 3 -
4 Power on sequence XSD Min.1us I2C command Min.0.5ms - XSD can be connect to
5 Resister - I2C format Write Operation S P R/W ACK (S) D7 D6 D5 D4 D3 D2 D1 D0 ACK (S) D7 D6 D5 D4 D3 D2 D1 D0 ACK (S) Slave Device Address Ox18 8Bit Data(1) 8Bit Data(2) Read Operation S P R/W ACK (S) D7 D6 D5 D4 D3 D2 D1 D0 ACK (M) D7 D6 D5 D4 D3 D2 D1 D0 NO ACK Slave Device Address Ox19 8Bit Data(1) 8Bit Data(2) Within the procedure of the I2C-bus, unique situations arise which are defined as START (S) and STOP (P) conditions. A HIGH to LOW transition on the line while is HIGH is one such unique case. This situation indicates a START condition. A LOW to HIGH transition on the line while is HIGH defines a STOP condition
6 - Register Format Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 Data1 PD FLAG D9 D8 D7 D6 D5 D4 Data2 D3 D2 D1 D0 S3 S2 S1 S0 PD : Power down mode PD Codes per step 0 Normal operation mode 1 Power down mode FLAG : FLAG must keep L at writing operation D[9:0] : Input decoder data Output current = (D[9:0]/1023) X 120mA S[3:2] : Code per Step control S[3:2] Code per Step 00 Direct driving 01 1 step 10 2 step 11 4 step S[1:0] : Smart transition control S[1:0] Transition time 00 Vib_T X 1 01 Vib_T X 2 10 Vib_T X 4 11 Vib_T X 8 Vib_T = Under the description Direct mode STC Position(um) Time Vib_T - 6 -
7 Vib_T Set up Method - Vib_T Set on Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 Data1(OxEC) Data2(OxA3) MCLK[1:0] setting Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 Data1(OxA1) Data2 (1) MCLK[1] MCLK[2] (1) Default : 0x05 - T_Control[4:0] setting Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 Data1(OxF2) Data2 (2) T_C[4] T_C[3] T_C[2] T_C[1] T_C[0] (2) Defalut : 0x00 - Vib_T Set off Bit7 Bit6 Bit5 Bit4 Bit3 Bit2 Bit1 Bit0 Data1(OxDC) Data2(Ox51)
8 - Vib_T selection table Max_T = 1023 final _ data start _ data X Vib_T T_Control[4:0] = 00000(default), MCLK (1) [1:0] = 01(default) T_Control[4:0] Max_T(ms) T_Control[4:0] Max_T(ms) (default) (1) MCLK[1:0] = 00 : double 01 : X1(default) 10 : half 11 : quarter Final data Direct mode S[3:2] = 00 Start data Max_T - 8 -
9 I2C Protocol - I2C timing Parameter Symbol Min Max Unit clock frequency f khz Hold time (repeated) START condition t HD;STA us Low period of the clock t LOW us High period of the clock t HIGH us Set up time for a repeated START condition t SU;STA us Data hold time t HD;DAT us Data set up time t SU;DAT ns Set-up time for STOP condition t SU;STO us Bus free time between a STOP and START condition t BUF us Pulse width of spike suppress t SP 0 50 ns S tlow tsu;dat Sr thd;sta thd;dat thigh tsu;sta tbuf tsp tsu;sto P S - 9 -
10 Application circuit VCM XSD IOUT 1.8V Master VSS 1uF bottom View
11 Package Outline(6pin-WLP)
FP Bit DAC 120mA VCM Driver with I 2 C Interface. Features. Description. Applications. Pin Assignments. Ordering Information FP5510
10-Bit DAC 120mA VCM Driver with I 2 C Interface Description The is a single 10-bit DAC with 120mA output current voice coil motor (VCM) driver, with an I 2 C-compatible serial interface that operates
7 OUT1 8 OUT2 9 OUT3 10 OUT4 11 OUT5 12 OUT6 13 OUT7 14 OUT8 15 OUT9 16 OUT10 17 OUT11 18 OUT12 19 OUT13 20 OUT14 21 OUT15 22 OUT16 OUT17 23 OUT18
18 CHANNELS LED DRIVER GENERAL DESCRIPTION is comprised of 18 constant current channels each with independent PWM control, designed for driving LEDs. The output current of each channel can be set at up
Low Cost 4 Stereo Inputs and 4-Channel Outputs Volume, Tone, Balance, Fader, Loudness, and Selectable Input Gain APPLICATIONS R B.
Low Cost 4 Stereo Inputs and 4-Channel Outputs Volume, Tone, Balance, Fader, Loudness, and Selectable Input Gain FEATURES Operation range : 2.7V~6.5V 4 stereo inputs with selectable input gain 4 independent
4 Stereo Inputs and 2 Channels Output Volume, Tone, Balance, Loudness and Selectable Input Gain R B. Bass Treble. Serial Bus Decoder and Latches
4 Stereo Inputs and 2 Channels Output Volume, Tone, Balance, Loudness and Selectable Input Gain FEATURES Operation range : 2.7V~5V 4 stereo inputs with selectable input gain 2 independent speaker controls
Low Cost 3 Stereo Inputs and 4-Channel Outputs Volume, Tone, Balance, Fader, Loudness, and Selectable Input Gain APPLICATIONS R B.
Low Cost 3 Stereo Inputs and 4-Channel Outputs Volume, Tone, Balance, Fader, Loudness, and Selectable Input Gain FEATURES Operation range : 2.7V~6.5V 3 stereo inputs with selectable input gain 4 independent
Low-Current Consumption, Real-Time Clock IC (General-Purpose IC)
S1T542XXD0A00 Low-Current Consumption, Real-Time Clock IC (General-Purpose IC) Operating power voltage 1.6 to 5.5V (-40 to +85 C) Output control 32.768kHz output function Clock power voltage 1.2 to 5.5V
10-Bit, Low-Power, 2-Wire Interface, Serial, Voltage-Output DAC
19-227; Rev 1; 11/4 1-Bit, Low-Power, 2-Wire Interface, Serial, General Description The is a single, 1-bit voltage-output digital-toanalog converter () with an I 2 C -compatible 2-wire interface that operates
Temperature Sensor and System Monitor in a 10-Pin µmax
19-1959; Rev 1; 8/01 Temperature Sensor and System Monitor General Description The system supervisor monitors multiple power-supply voltages, including its own, and also features an on-board temperature
HT16C22/HT16C22G RAM Mapping 44 4 LCD Controller Driver
RAM Mapping 44 4 LCD Controller Driver Features Operating voltage: 2.4V~5.5V Internal 32kHz RC oscillator Bias: 1/2 or 1/3; Duty: 1/4 Internal LCD bias generation with voltage-follower buffers I 2 C-bus
INTEGRATED CIRCUITS. PCA channel I 2 C multiplexer and interrupt logic. Product data Supersedes data of 2001 May 07.
INTEGRATED CIRCUITS 2-channel I 2 C multiplexer and interrupt logic Supersedes data of 2001 May 07 2002 Mar 28 The pass gates of the multiplexer are constructed such that the V DD pin can be used to limit
Pin Assignment SEG28 SEG29 SEG30 SEG31 SEG32 SEG33 SEG34 SEG35 SEG36 SEG37 SEG38 VDD SDA SCL COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM
General Description Features VK2C23 56 4 / 52 8 LCD Driver Controller The VK2C23 device is a memory mapping and multi-function LCD controller driver. The Display segments of the device are 224 patterns
FLD00042 I 2 C Digital Ambient Light Sensor
FLD00042 I 2 C Digital Ambient Light Sensor Features Built-in temperature compensation circuit Operating temperature: -30 C to 70 C Supply voltage range: 2.4V to 3.6V I 2 C serial port communication: Fast
GC221-SO16IP. 8-bit Turbo Microcontroller
Total Solution of MCU GC221-SO16IP 8-bit Turbo Microcontroller CORERIVER Semiconductor reserves the right to make corrections, modifications, enhancements, improvements, and other changes to its products
INTEGRATED CIRCUITS. PCA bit I 2 C LED dimmer. Product data Supersedes data of 2003 Feb May 02. Philips Semiconductors
INTEGRATED CIRCUITS Supersedes data of 2003 Feb 26 2003 May 02 Philips Semiconductors DESCRIPTION The is a 16-bit I 2 C-bus and SMBus I/O expander optimized for dimming LEDs in 256 discrete steps for Red/Green/Blue
BATRON. Specification for BTHQ 21605V-FSRE-I2C-COG
BATRON Specification for BTHQ 21605V-FSRE-I2C-COG Version October 2003 PAGE 2 OF 11 DOCUMENT REVISION HISTORY 1: DOCUMENT REVISION FROM TO DATE DESCRIPTION CHANGED BY CHECKED BY A 2003.10.16 First release.
Pin Configuration Pin Description PI4MSD5V9540B. 2 Channel I2C bus Multiplexer. Pin No Pin Name Type Description. 1 SCL I/O serial clock line
2 Channel I2C bus Multiplexer Features 1-of-2 bidirectional translating multiplexer I2C-bus interface logic Operating power supply voltage:1.65 V to 5.5 V Allows voltage level translation between 1.2V,
Quad, 12-Bit, Low-Power, 2-Wire, Serial Voltage-Output DAC
19-317; Rev ; 1/ Quad, 1-Bit, Low-Power, -Wire, Serial Voltage-Output General Description The is a quad, 1-bit voltage-output, digitalto-analog converter () with an I C -compatible, -wire interface that
INTEGRATED CIRCUITS. PCA bit I 2 C LED dimmer. Product data sheet Supersedes data of 2004 Sep Oct 01. Philips Semiconductors
INTEGRATED CIRCUITS Supersedes data of 2004 Sep 14 2004 Oct 01 Philips Semiconductors The initial setup sequence programs the two blink rates/duty cycles for each individual PWM. From then on, only one
INTEGRATED CIRCUITS. PCA bit I 2 C LED dimmer. Product data Supersedes data of 2003 May Oct 01. Philips Semiconductors
INTEGRATED CIRCUITS Product data Supersedes data of 2003 May 02 2004 Oct 01 Philips Semiconductors DESCRIPTION The is a 16-bit I 2 C-bus and SMBus I/O expander optimized for dimming s in 256 discrete steps
LC898301AXA. Advance Information
Ordering number : *A2268 Advance Information CMOS LSI Liner Vibrator Driver IC http://onsemi.com Overview The is a Linear Vibrator Driver IC dedicated to haptic feedback actuator and vibrator employed
RT9420. Host-Side Single Cell Lithium Battery Gauge. Features. General Description. Applications. Simplified Application Circuit
RT942 Host-Side Single Cell Lithium Battery Gauge General Description The RT942 is a compact, host-side fuel gauge IC for lithium-ion (Li+) battery-powered systems. For the embedded Fuel Gauge function,
PCA bit I 2 C LED driver with programmable blink rates INTEGRATED CIRCUITS May 05. Product data Supersedes data of 2003 Feb 20
INTEGRATED CIRCUITS 8-bit I 2 C LED driver with programmable blink rates Supersedes data of 2003 Feb 20 2003 May 05 Philips Semiconductors 8-bit I 2 C LED driver with programmable blink rates FEATURES
RAM Mapping 72*4 / 68*8 / 60*16 LCD Driver Controller HT16C24/HT16C24G
RAM Mapping 72*4 / 68*8 / 60*16 LCD Driver Controller HT16C24/HT16C24G Revision: 1.00 Date: March 23, 2011 Table of Contents Features... 4 Applications... 4 General Description... 4 Block Diagram... 5
HT16C23/HT16C23G RAM Mapping 56 4 / 52 8 LCD Driver Controller
RAM Mapping 56 4 / 52 8 LCD Driver Controller Features Operating voltage: 2.4 ~ 5.5V Internal 32kHz RC oscillator Bias: 1/3 or 1/4; Duty:1/4 or 1/8 Internal LCD bias generation with voltage-follower buffers
INTEGRATED CIRCUITS. PCA9544A 4-channel I 2 C multiplexer with interrupt logic. Product data sheet Supersedes data of 2004 Jul 28.
INTEGRATED CIRCUITS Supersedes data of 2004 Jul 28 2004 Sep 29 DESCRIPTION The is a 1-of-4 bi-directional translating multiplexer, controlled via the I 2 C-bus. The SCL/SDA upstream pair fans out to four
UVA Light Sensor with I 2 C Interface
UVA Light Sensor with I 2 C Interface DESCRIPTION is an advanced ultraviolet (UV) light sensor with I 2 C protocol interface and designed by the CMOS process. It is easily operated via a simple I 2 C command.
NJU Channels Electronic Volume PACKAGE OUTLINE
Channels Electronic olume GENERAL DESCRIPTION The NJU73 is a channels I C electronic volume IC with external mute controls. PACKAGE OUTLINE The NJU73 has many characteristics that are useful in audio application,
M41T0 SERIAL REAL-TIME CLOCK
SERIAL REAL-TIME CLOCK FEATURES SUMMARY 2.0 TO 5.5V CLOCK OPERATING VOLTAGE COUNTERS FOR SECONDS, MINUTES, HOURS, DAY, DATE, MONTH, YEARS, and CENTURY YEAR 2000 COMPLIANT I 2 C BUS COMPATIBLE (400kHz)
AD5272/AD5274. Single-Channel, digipot+ 1% Resistor Tolerance, 1024-/256-Position Digital Variable FEATURES FUNCTIONAL BLOCK DIAGRAM V DD APPLICATIONS
Single-Channel, digipot+ % Resistor Tolerance, 24-/256-Position Digital Variable AD5272/AD5274 FEATURES Single-channel, 24-/256-position resolution 2 kω nominal resistance Maximum ±% nominal resistor tolerance
SMBus 4-Channel Wide Dynamic Range Power Accumulator
General Description The MAX34407 is a current and voltage monitor that is specialized for determining power consumption. The device has a wide dynamic range to allow it to accurately measure power in systems
V OUT0 OUT DC-DC CONVERTER FB
Rev 1; /08 Dual-Channel, I 2 C Adjustable General Description The contains two I 2 C adjustable-current DACs that are each capable of sinking or sourcing current. Each output has 15 sink and 15 source
DS1803 Addressable Dual Digital Potentiometer
www.dalsemi.com FEATURES 3V or 5V Power Supplies Ultra-low power consumption Two digitally controlled, 256-position potentiometers 14-Pin TSSOP (173 mil) and 16-Pin SOIC (150 mil) packaging available for
NJU Channels Electronic Volume PACKAGE OUTLINE
Channels Electronic Volume GENERAL DESCRIPTION The NJU7 is a channels I C electronic volume IC with external mute controls. PACKAGE OUTLINE The NJU7 has many characteristics that are useful in audio application,
Description. Features. Pin Configuration. Pin Description PI4MSD5V9546A. 4 Channel I2C bus Switch with Reset
4 Channel I2C bus Switch with Reset Features Description 1-of-4 bidirectional translating multiplexer I2C-bus interface logic Operating power supply voltage:1.65 V to 5.5 V Allows voltage level translation
NJU Channels Electronic Volume PACKAGE OUTLINE
Channels Electronic olume GENERAL DESCRIPTION The NJU7 is a channels I C electronic volume IC with external mute controls. PACKAGE OUTLINE The NJU7 has many characteristics that are useful in audio application,
Pin Pin. 1 A0 Input address input 0 2 A1 Input address input 1. 4 INT0 Input active LOW interrupt input 0
2 Channel I2C bus switch with interrupt logic and Reset Features 1-of-2 bidirectional translating multiplexer I2C-bus interface logic Operating power supply voltage:1.65 V to 5.5 V Allows voltage level
INF8574 GENERAL DESCRIPTION
GENERAL DESCRIPTION The INF8574 is a silicon CMOS circuit. It provides general purpose remote I/O expansion for most microcontroller families via the two-line bidirectional bus (I 2 C). The device consists
TOP VIEW. Maxim Integrated Products 1
19-34; Rev ; 1/ 1-Bit Low-Power, -Wire, Serial General Description The is a single, 1-bit voltage-output, digital-toanalog converter () with an I C -compatible -wire interface that operates at clock rates
PLL Synthesizer with I 2 C Bus for TV Tuner
PLL Synthesizer with I 2 C Bus for TV Tuner DESCRIPTION The NJW1504/1508 are a PLL frequency synthesizer especially designed for TV and VCR tuning systems and consists of PLL circuit and a prescaler which
DS1621. Digital Thermometer and Thermostat FEATURES PIN ASSIGNMENT
DS1621 Digital Thermometer and Thermostat FEATURES Temperature measurements require no external components Measures temperatures from 55 C to +125 C in 0.5 C increments. Fahrenheit equivalent is 67 F to
FAH4830 Haptic Driver for DC Motors (ERMs) and Linear Resonant Actuators (LRAs)
FAH4830 Haptic Driver for DC Motors (ERMs) and Linear Resonant Actuators (LRAs) Features Direct Drive of ERM and LRA Motors External PWM Input (10 khz to 50 khz) External Motor Enable/Disable Input Internal
DS1307ZN. 64 X 8 Serial Real Time Clock PIN ASSIGNMENT FEATURES
DS1307 64 8 Serial Real Time Clock FEATURES Real time clock counts seconds, minutes, hours, date of the month, month, day of the week, and year with leap year compensation valid up to 2100 56 byte nonvolatile
Dual, 8-Bit, Low-Power, 2-Wire, Serial Voltage-Output DAC
19-3538; Rev ; 2/5 Dual, 8-Bit, Low-Power, 2-Wire, Serial Voltage-Output General Description The is a dual, 8-bit voltage-output, digital-toanalog converter () with an I 2 C*-compatible, 2-wire interface
MCP Bit, Quad Digital-to-Analog Converter with EEPROM Memory. Features. Description. Applications
12-Bit, Quad Digital-to-Analog Converter with EEPROM Memory Features 12-Bit Voltage Output DAC with Four Buffered Outputs On-Board Nonvolatile Memory (EEPROM) for DAC Codes and I 2 C Address Bits Internal
6-Bit Windowed Volatile DAC with Command Code SDA SCL. Resistance POR/BOR. Range. Value. Data. Value. I 2 C Slave
6-Bit Windowed Volatile DAC with Command Code Features: 6-Bit DAC: - 65 Taps: 64 Resistors with Taps to Full Scale and Zero Scale (Wiper Code 00h to 40h) - 7-bit Serial Data (00h to 7Fh, 00h - 20h = Zero
MAX Industry s Lowest-Power Ambient Light Sensor with ADC
EVALUATION KIT AVAILABLE AVAILABLE MAX449 General Description The MAX449 ambient light sensor features an I2C digital output that is ideal for a number of portable applications such as smartphones, notebooks,
CAP Channel Capacitive Touch Sensor with 6 LED Drivers. PRODUCT FEATURES General Description. Applications. Features. Block Diagram.
CAP1166 6 Channel Capacitive Touch Sensor with 6 LED Drivers PRODUCT FEATURES General Description The CAP1166, which incorporates SMSC s RightTouch 1 technology, is a multiple channel Capacitive Touch
S-35392A 2-WIRE REAL-TIME CLOCK. Features. Applications. Package. ABLIC Inc., Rev.3.2_03
www.ablicinc.com 2-WIRE REAL-TIME CLOCK ABLIC Inc., 26-216 Rev.3.2_3 The is a CMOS 2-wire real-time clock IC which operates with the very low current consumption in the wide range of operation voltage.
TCA62724FMG TCA62724FMG. 3-Channel Constant-Current LED Driver. Features TOSHIBA CMOS Integrated Circuits Silicon Monolithic
TOSHIBA CMOS Integrated Circuits Silicon Monolithic TCA62724FMG 3-Channel Constant-Current LED Driver The TCA62724FM is an optimal constant-current LED driver for RGB pixel LEDs. The device supports 16
CXA1315M/P. 8-bit D/A Converter Supporting with I 2 C Bus
8-bit D/A Converter Supporting with I 2 C Bus Description The is developed as a 5-channel 8- bit D/A converter supporting with I 2 C bus. CXAM pin SOP (Plastic) CXAP pin DIP (Plastic) Features Serial control
ILI2117 Capacitive Touch Controller
ILI2117 ILI2117 Capacitive Touch Controller Datasheet Version: V1.01 Release Date: SEP. 09,2015 ILI TECHNOLOGY CORP. 8F, No.38, Taiyuan St., Jhubei City, Hsinchu County 302, Taiwan, R.O.C Tel.886-3-5600099;
AK channel Capacitive Touch Sensor IC
AK4161 6channel Capacitive Touch Sensor IC GENERAL DESCRIPTION The AK4161 is a low operating voltage and low power consumption 6channel capacitive touch sensor. Maximum 6 input channels can be configured
4 Stereo Inputs, 2W BTL Stereo Output 16-bit Stereo DAC and Volume Control
4 Stereo Inputs, W BTL Stereo Output 6-bit Stereo DAC and Volume Control FEATURES Operation range:.4v ~ 6.5V Volume control range Gain: 0 to db, 3dB/step Attenuation: 0 to 77.5dB,.5dB/step 4 stereo inputs
ADC081C021/ADC081C027 I 2 C-Compatible, 8-Bit Analog-to-Digital Converter (ADC) with Alert Function
May 5, 2008 ADC081C021/ADC081C027 I 2 C-Compatible, 8-Bit Analog-to-Digital Converter (ADC) with Alert Function General Description The ADC081C021 is a low-power, monolithic, 8-bit, analog-to-digital converter(adc)
CAT bit Programmable LED Dimmer with I 2 C Interface DESCRIPTION FEATURES APPLICATIONS TYPICAL APPLICATION CIRCUIT
16-bit Programmable Dimmer with I 2 C Interface FEATURES 16 drivers with dimming control 256 brightness steps 16 open drain outputs drive 25 ma each 2 selectable programmable blink rates: frequency: 0.593Hz
ABOV SEMICONDUCTOR Co., Ltd. LIGHT-TO-DIGITAL CONVERTER MC8121. Data Sheet (REV.1.61)
ABOV SEMICONDUCTOR Co., Ltd. LIGHT-TO-DIGITAL CONVERTER MC8121 Data Sheet (REV.1.61) REVISION HISTORY REVISION 0.0 (June 7, 2012) - Initial Version REVISION 0.1 (July 4, 2012) - Combine MC8111 & MC8121
Fully Calibrated Temperature Sensor IC
Fully Calibrated Temperature Sensor IC 1 General Description The integrated circuit MS1088 is a fully integrated tested and calibrated digital low power temperature sensor with a typical temperature measurement
LI-M021C-MIPI Data Sheet
LEOPARD IMAGING INC Key Features Aptina 1/3" CMOS Digital Image Sensor MT9M021 Optical format: 1/3" Active pixels: 1280H x 960V Pixel size: 3.75 um x 3.75 um Global shutter Color filter array: RGB Bayer
Two-/Four-Channel, I 2 C, 7-Bit Sink/Source Current DAC
19-4744; Rev 1; 7/9 Two-/Four-Channel, I 2 C, 7-Bit Sink/Source General Description The DS4422 and DS4424 contain two or four I 2 C programmable current DACs that are each capable of sinking and sourcing
Quad, 12-/14-/16-Bit nanodacs with 5 ppm/ C On-Chip Reference, I 2 C Interface AD5625R/AD5645R/AD5665R, AD5625/AD5665
Data Sheet Quad, 12-/14-/16-Bit nanodacs with 5 ppm/ C On-Chip Reference, I 2 C Interface AD5625R/AD5645R/AD5665R, AD5625/AD5665 FEATURES Low power, smallest pin-compatible, quad nanodacs AD5625R/AD5645R/AD5665R
AD5175. Single-Channel, 1024-Position, Digital Rheostat with I 2 C Interface and 50-TP Memory FUNCTIONAL BLOCK DIAGRAM FEATURES APPLICATIONS
Single-Channel, 24-Position, Digital Rheostat with I 2 C Interface and 5-TP Memory AD575 FEATURES Single-channel, 24-position resolution kω nominal resistance 5-times programmable (5-TP) wiper memory Rheostat
FUNCTIONAL BLOCK DIAGRAM SDA SCL SMBALERT. SMBus SERIAL BUS INTERFACE ADDRESS SELECTION PWM CONFIG AUTOMATIC FAN SPEED CONTROL REGISTERS
Temperature Sensor Hub and Fan Controller FEATURES Monitors up to 10 remote temperature sensors Monitors and controls speed of up to 4 fans independently PWM outputs drive each fan under software control
MCP Bit, Quad Digital-to-Analog Converter with EEPROM Memory. Features. Description. Applications
12-Bit, Quad Digital-to-Analog Converter with EEPROM Memory Features 12-Bit Voltage Output DAC with 4 Buffered Outputs On-Board Non-Volatile Memory (EEPROM) for DAC Codes and I 2 C TM Address Bits Internal
UVA and UVB Light Sensor with I 2 C Interface
UVA and UVB Light Sensor with I 2 C Interface DESCRIPTION The senses UVA and UVB light and incorporates photodiode, amplifiers, and analog / digital circuits into a single chip using a CMOS process. When
ETM45E-03. Application Manual. Real Time Clock Module RX8900SA / CE. Preliminary
Application Manual Real Time Clock Module RX89SA / CE Preliminary NOTICE This material is subject to change without notice. Any part of this material may not be reproduced or duplicated in any form or
Haptic Driver for DC Motors (ERMs) and Linear Resonant Actuators (LRAs)
June 2013 FAH4830 Haptic Driver for DC Motors (ERMs) and Linear Resonant Actuators (LRAs) Features Direct Drive of ERM and LRA Motors External Input (10 khz to 50 khz) External Motor Enable/Disable Input
ADC081C021/ADC081C027
I 2 C-Compatible, 8-Bit Analog-to-Digital Converter with Alert Function General Description The ADC081C021 is a low-power, monolithic, 8-bit, analog-to-digital converter (ADC) that operates from a +2.7
MCP453X/455X/463X/465X
7/8-Bit Single/Dual I 2 C Digital POT with Volatile Memory Features Single or Dual Resistor Network options Potentiometer or Rheostat configuration options Resistor Network Resolution - 7-bit: 128 Resistors
SQ277 Series Miniature amplified pressure sensors
FEATURES 0... 1.5 to 0... 7, 0... ±1.5 to 0... ±7, absolute, differential or gage Barometric pressure ranges Output: 0.5...4.5 V and I C-bus (SPI and switching outputs optional) Precision ASIC conditioning
Two-/Four-Channel, I 2 C, 7-Bit Sink/Source Current DAC
General Description The DS4422 and DS4424 contain two or four I2C programmable current DACs that are each capable of sinking and sourcing current up to 2μA. Each DAC output has 127 sink and 127 source
Part Number SuperPix TM image sensor is one of SuperPix TM 2 Mega Digital image sensor series products. These series sensors have the same maximum ima
Specification Version Commercial 1.7 2012.03.26 SuperPix Micro Technology Co., Ltd Part Number SuperPix TM image sensor is one of SuperPix TM 2 Mega Digital image sensor series products. These series sensors
Obsolete Product(s) - Obsolete Product(s)
Memory module temperature sensor Features Temperature sensor compliant with JEDEC JC42.4 Temperature sensor Temperature sensor resolution: 0.25 C (typ)/lsb Temperature sensor accuracy: ± 1 C from +75 C
LTC266/LTC2616/LTC2626 ABSOLUTE AXI U RATI GS W W W Any Pin to GND....3V to 6V Any Pin to V CC... 6V to.3v Maximum Junction Temperature C Stora
FEATURES Smallest Pin-Compatible Single DACs: LTC266: 16 Bits LTC2616: 14 Bits LTC2626: 12 Bits Guaranteed 16-Bit Monotonic Over Temperature 27 Selectable Addresses 4kHz I 2 C TM Interface Wide 2.7V to
S-35390A 2-WIRE REAL-TIME CLOCK. Features. Applications. Packages. SII Semiconductor Corporation, Rev.4.
www.sii-ic.com 2-WIRE REAL-TIME CLOCK SII Semiconductor Corporation, 2004-2016 Rev.4.2_02 The is a CMOS 2-wire real-time clock IC which operates with the very low current consumption in the wide range
AD5625R/AD5645R/AD5665R, AD5625/AD5665
Quad, 12-/14-/16-Bit nanodacs with 5 ppm/ C On-Chip Reference, I 2 C Interface AD5625R/AD5645R/AD5665R, AD5625/AD5665 FEATURES Low power, smallest pin-compatible, quad nanodacs AD5625R/AD5645R/AD5665R
Single, 256-Tap Volatile, I2C, Low-Voltage Linear Taper Digital Potentiometer
General Description The single, 256-tap volatile, low-voltage linear taper digital potentiometer offers three end-toend resistance values of kω, 5kΩ, and kω. Potentiometer terminals are independent of
S-35390A 2-WIRE REAL-TIME CLOCK. Rev.2.4_00. Features. Applications. Packages. Seiko Instruments Inc. 1
Rev.2.4_ 2-WIRE REAL-TIME CLOCK The is a CMOS 2-wire real-time clock IC which operates with the very low current consumption and in the wide range of operation voltage. The operation voltage is 1.3 V to
onlinecomponents.com
www.sii-ic.com 2-WIRE REAL-TIME CLOCK Seiko Instruments Inc., 2004-2010 Rev.3.0_00 The is a CMOS 2-wire real-time clock IC which operates with the very low current consumption and in the wide range of
ETM45E-05. Application Manual. Real Time Clock Module RX8900SA CE. Preliminary
Application Manual Real Time Clock Module RX89SA CE Preliminary NOTICE This material is subject to change without notice. Any part of this material may not be reproduced or duplicated in any form or any
I O 7-BIT POT REGISTER ADDRESS COUNT 7-BIT POT. CODE 64 (40h) DS3503
Rev 1; 3/9 NV, I2C, Stepper Potentiometer General Description The features two synchronized stepping digital potentiometers: one 7-bit potentiometer with RW as its output, and another potentiometer with
The operation of the S-5852A Series is explained in the user's manual. Contact our sales office for more information.
www.ablicinc.com HIGH-ACCURACY DIGITAL TEMPERATURE SENSOR WITH THERMOSTAT FUNCTION ABLIC Inc., 2015-2016 The is a high-accuracy digital temperature sensor with thermostat function, which operates in 1.7
LC709203F/D. Smart LiB Gauge Battery Fuel Gauge LSI for 1-Cell Lithium-ion (Li+) Overview. Features
Smart LiB Gauge Battery Fuel Gauge LSI for 1-Cell Lithium-ion (Li+) Overview LC709203F is a Fuel Gauge for a single lithium ion battery. It is part of our Smart LiB Gauge family of Fuel Gauges which measure
AD5627R/AD5647R/AD5667R, AD5627/AD5667
Dual, -/4-/6-Bit nanodacs with 5 ppm/ C On-Chip Reference, I C Interface AD567R/AD5647R/AD5667R, AD567/AD5667 FEATURES Low power, smallest pin-compatible, dual nanodacs AD567R/AD5647R/AD5667R -/4-/6-bit
AD5602/AD5612/AD V to 5.5 V, <100 μa, 8-/10-/12-Bit nanodacs with I 2 C -Compatible Interface, Tiny SC70 Package FEATURES
2.7 V to 5.5 V, < μa, 8-/-/2-Bit nanodacs with I 2 C -Compatible Interface, Tiny SC7 Package AD562/AD562/AD5622 FEATURES Single 8-, -, 2-bit DACs, 2 LSB INL 6-lead SC7 package Micropower operation: μa
M41T00CAP. Serial access real-time clock (RTC) with integral backup battery and crystal. Features
Serial access real-time clock (RTC) with integral backup battery and crystal Datasheet production data Features Real-time clock (RTC) with backup battery integrated into package Uses M41T00S enhanced RTC
Intelligent Temperature Monitor and Dual PWM Fan Controller ADM1031
FEATURES Optimized for Pentium III Reduced guardbanding software Automatic fan speed control, independent of CPU intervention after initial setup Control loop to minimal acoustic noise and battery consumption
3-Channel Fun LED Driver
3-Channel Fun LED Driver Description is a 3-channel fun LED driver which features two-dimensional auto breathing mode. It has One Shot Programming mode and PWM Control mode for RGB lighting effects. The
120mA Current Sinking 10-Bit I 2 C DAC
120mA Current Sinking 10-Bit I 2 C DAC Description: The is a voice coil motor (VCM) driver, with an I 2 C-compatible serial interface that operates at clock rates up to 400 khz. Designed for camera auto-focus
120 ma, Current Sinking, 10-Bit, I 2 C DAC AD5821
2 ma, Current Sinking, -Bit, I 2 C DAC FEATURES 2 ma current sink Available in 3 3 array WLCSP package 2-wire (I 2 C-compatible).8 V serial interface -bit resolution Integrated current sense resistor 2.7
SENSYLINK Microelectronics. (CT7112) Digital Temperature Sensor
SENSYLINK Microelectronics () Digital Temperature Sensor is a Digital Temperature Sensor with±0.5 C Accuracy Compatible with SMBus, I 2 C and 2-wire Interface. It is ideally used in HVAC, Thermal management
+Denotes lead-free package. *EP = Exposed paddle. V CC GND AGND AV CC GND I 2 C INTERFACE. -35dB TO +25dB GAIN AUDIO SOURCE AUDIO AMPLIFIER DS4420
Rev ; 9/6 I 2 C Programmable-Gain Amplifier General Description The is a fully differential, programmable-gain amplifier for audio applications. It features a -35dB to +25dB gain range controlled by an
High-Efficiency Voice Coil Motor Driver
EVALUATION KIT AVAILABLE MAX1457 General Description The MAX1457 is a high-efficiency voice coil motor (VCM) driver ideal for use in power-sensitive autofocus camera applications. The MAX1457 utilizes
S-35390A H Series FOR AUTOMOTIVE 105 C OPERATION 2-WIRE REAL-TIME CLOCK. Features. Packages. ABLIC Inc., Rev.2.
www.ablic.com FOR AUTOMOTIVE 15 C OPERATION 2-WIRE REAL-TIME CLOCK ABLIC Inc., 211-218 Rev.2.2_3 The is a 15C operation CMOS 2-wire real-time clock IC which operates with the very low current consumption
MT6803 Magnetic Angle Sensor IC
Features and Benefits Based on advanced magnetic field sensing technology Measures magnetic field direction rather than field intensity Contactless angle measurement Large air gap Excellent accuracy, even
RGBW Color Sensor with I 2 C Interface
RGBW Color Sensor with I 2 C Interface DESCRIPTION color sensor senses red, green, blue, and white light and incorporates photodiodes, amplifiers, and analog / digital circuits into a single chip using
Phased Out Products. 2-SCART Compatible AV Switch for DVD Recorders for Europe Monolithic IC MM1763. Outline. Features. Package.
2-SCART Compatible AV Switch for DVD Recorders for Europe Monolithic IC MM1763 Outline This IC is a one-chip IC integrating an I 2 C BUS controlled AV switch with 4 inputs and 3 outputs with a 6- channel
9-Input, 3-Output Stereo Audio Selector
9-Input 3-Output Stereo Audio Selector! GENERAL DESCRIPTION! PACKAGE OUTLINE NJW is a 9-input 3-output stereo audio selector. It includes three independent 9input-output stereo audio selectors and adjustable
120 ma Current Sinking 10-Bit I 2 C DAC
120 ma Current Sinking 10-Bit I 2 C DAC Description: The is a single 10-bit DAC with 120mA output current sink capability. It features an internal reference and operates from a single 2.7 V to 5.5 V supply.
NJW1320 WIDE BAND VIDEO SWITCH WITH I 2 C BUS
WIDE BAND VIDEO SWITCH WITH I 2 C BUS NJW1320 GENERAL DESCRIPTION The NJW1320 is a Wide Band Video Switch with I 2 C BUS.The NJW1320 includes switch of 4-input 3-output and amplifier. It is suitable for
128-Position I 2 C Compatible Digital Potentiometer AD5247
28-Position I 2 C Compatible Digital Potentiometer FEATURES FUNCTIONAL BLOCK DIAGRAM 28-position End-to-end resistance 5 kω, 0 kω, 50 kω, 00 kω Ultra-Compact SC70-6 (2 mm 2. mm) package I 2 C compatible