FieldIT Temperature Transmitter, head mounted TH02/TH02-Ex

Transcription

1 Data Sheet 0/-8.9 EN Level 0: Information FieldIT Temperature Transmitter, head mounted TH0/TH0-Ex HART programmable, Pt 00 (RTD), thermocouples, electrical isolation Input Resistance thermometer (,, wire circuit) Thermocouples Resistance remote signalling unit ( Ω) Voltages, mv ( mv) Output wire technique...0 ma, HART signal Electrical isolation (I/O) Measured error 0. K Customer-specific linearization tie points Continuous sensor and self-monitoring Parameter saved permanently in EEPROM Monitoring of data integrety every 0 s Wire break monitoring in acc. with NAMUR NE 89 Substitution strategy in case of error (NE ) Approvals for explosion protection Intrinsically safe II () G EEx [ia] ib IIC T6, mount in zone II G EEx n A II T6, mount in zone Input functionality (absolute, differential, average value) EMC acc. to EN and NE Parameterization Device Management Tool: SV0 (SMART VISION) Hand held terminals: 69HT, STT0, HHT75 CoMeter (HART configurator/lc display) 5 years warranty Excellent long term stability Temperature linear output signal Enhanced self diagnostics

2 Temperature Transmitter, head mounted TH0/TH0-Ex HART programmable, Pt 00 (RTD), thermocouples, electrical isolation 0/-8.9 EN Technical data Output Output signal (temperature linear)...0 ma Residual ripple (peak-to-peak) < 0. % Current consumption <.6 ma Maximum output current.6 ma Parameterizable current error signal Underranging.6 ma Overranging ma Default value ma Damping t 6 = s Input Resistance Resistance thermometer (IEC 75, JIS, SAMA) n Pt 00/Ni 00 to Pt 000/Ni 000; Cu (n = 0., 0., 0.5,,.,,...0) Min. measuring span 5 K/50 K Resistance Ω/ Ω Min. measuring span 5 Ω/50 Ω Maximum line resistance (R w ) per core,, wire 7.5 Ω, 0 Ω, 50 Ω Measuring current 00 µa Sensor short-circuit < 5 Ω (for RTD) Sensor break (temperature/resistance measurement,, wire) Measuring range Ω > 50 Ω Measuring range Ω > 5. kω Sensor wire break monitoring in accordance with NAMUR NE 89 Sensor wire break detection wire resistance measurement > 5 Ω wire resistance measurement >.7 kω Input filter 50/60 Hz Thermocouples Types B, E, J, K, L, N, R, S, T, U Voltages -5 mv... 5 mv -5 mv...00 mv Minimum measuring span mv/50 mv Sensor wire break monitoring in accordance with NAMUR NE 89 Pulsed with µa outside of the measuring interval Monitoring disconnectible Thermocouple measurement > 5 kω Voltage measurement > 5 kω Input filter 50/60 Hz Internal reference junction Pt 00, via software switchable (no jumper necessary) Standard IEC 58- DIN 70 IEC 75; JIS; SAMA ), and wire DIN 760 ), and wire Input element Measuring range Min. measuring span Sensor Thermocouple type B Thermocouple type E Thermocouple type J Thermocouple type K Thermocouple type R Thermocouple type S Thermocouple type T Thermocouple type N Thermocouple type L Thermocouple type U Resistance thermometer Pt 00 Resistance thermometer Pt 000 Resistance thermometer Ni 00 Resistance thermometer Ni C ( F) C ( F) C ( F) C ( F) C ( F) C ( F) C ( F) C ( F) C ( F) C ( 8... F) C ( F) C ( F) C ( F) C ( F) Resistance Ω Ω/ Ω 5 Ω/50 Ω Voltage mv 5 mv... 5 mv 5 mv...00 mv mv 50 mv 5 C ( F) 0 C ( 5 F) 7 C ( 67 F) 5 C ( 98 F) 7 C (08 F) 9 C (8 F) 50 C ( 90 F) 60 C (08 F) 6 C ( 65 F) 0 C ( 7 F) 5 C ( 8 F) 50 C ( 90 F) 8 C ( 5 F) 5 C ( 8 F) ) IEC 75 a = , JIS a = , SAMA a = ) Edison Curve No. 7

3 Temperature Transmitter, head mounted TH0/TH0-Ex HART programmable, Pt 00 (RTD), thermocouples, electrical isolation 0/-8.9 EN Power supply (poling protected) Supply voltage Non-Ex-application U s = V DC For Ex-Application, max. U i = V DC wire methode: power supply wires = signal wires Influence of supply voltage < 0.05 %/0 V maximum residual ripple % U S (< 500 Hz) Power demand of indicators (only with AGLHD head) (Power demand of transmitter and indicator have to be added) Digital indicator U sd = V DC CoMeter (HART configutor/lc display) U sd =.9 V DC Maximum load Maximum permissible load R Ω 50 0 Z-060 (HC) R( kω ) 8,5 General characteristics ( U smax U smin ) = With CoMeter,, 7, Operation range V DC Power supply Us Output signal refreshment rate Pt s (Input signal change < 0.5 K/s) Thermocouples 0. s (Input signal change <.5 K/s) Vibration resistance Vibration in operation g acc. to DIN IEC 68T.-6 Resistance to shock acc. to DIN IEC 68T.-7 Electrical isolation (I/O).5 kv AC (60 s) Long-term stability 0. % p.a. 0 Mechanical construction Dimensions Confer dimensional drawing Weight 55 g Housing material Polycarbonat black (Non-Ex-type) blue (Ex-type) Electrical connection Terminals, pluggable.5 mm, screw terminals (stainless steel screws) Characteristics at rated conditions According to IEC 770 (related to 5 C) ) Digital measured error Pt 00 ± 0. K Thermocouples ± 0 µv Linear resistance 500 Ω/5000 Ω ± 0 mω/00 mω Linear voltage 0 mv/00 mv ± 0 µv/50 µv D/A measured error ± 0.05 % of measuring span Additional influence of the internal reference junction Pt 00 DIN IEC 75 Kl. B Influences Influence of ambient temperature Pt 00/resistance measurement ) < ( 0.05 % Thermocouple/mV ) < ( 0.05 % ME ( Ω ) % ) 0 K MS ( Ω ) ME ( mv ) MS ( mv ) 0.0 % K 00 % ) 0 K MS ( K) Percentage related to measuring span MS = ME MA MA = lower range value, ME = upper range value ) Percentage related to set measuring span Specified values corresponds to σ (Gaussian normal distribution) ) Pt 00 ( C): Influence of ambient temperature < (0.05 % 0.0 %)/0 K = 0.06 %/0 K ) Type K ( C): Influence of ambient temperature < (0.05 % 0.0 % 0.0 %)/0 K = 0.07 %/0 K Environment conditions Ambient temperature range C Transport and storage temperature C Relative humidity < 00 % (00 % humidity with isolated terminals only) Condensation Permitted

4 Temperature Transmitter, head mounted TH0/TH0-Ex HART programmable, Pt 00 (RTD), thermocouples, electrical isolation 0/-8.9 EN Explosion protection Intrinsically safe Zone Marking II () G EEx [ia] ib IIC T6 EC-Type-Examination certificate PTB 99 ATEX 9 X Temperature class T6/T5/T 50 C/65 C/85 C Supply circuit Output [ib] Input [ia] Max. voltage U i = 9. V U o = 5.6 V Short-circuit current I i = 0 ma I o =.5 ma ) Max. power P i = 0.8 W P o = 0 mw Internal inductance L i = 0 µh L o = mh Internal capacitance C i = 5 nf C o =.55 µf Zone Marking II G EEx n A II T6 Conformity statement PTB 99 ATEX 6 X Temperature class T6/T5/T 50 C/65 C/85 C Electromagnetic compatibility (EMC) Pt 00: measuring range C, span 00 K Type of test Degree Influence IEC Burst to signal/ kv < 0. % data lines Static discharge Contact plate (indirect) Terminals for supply 5) Terminals for sensors 5) 8 kv 6 kv kv no influence no influence no influence Radiated field MHz... GHz 0 V/m <.0 % Coupling 50 khz - 80 MHz 0 V <.0 % According to NAMUR NE recommendation. In case of an input signal change > 0.5 K/s for Pt00 or >.5 K/s for thermocouples a measured value plausibility check is performed. 5) Air discharge (at mm distance) Canadian Standards Association and Factory Mutual Intrinsically Safe FM CSA Nonincendive FM CSA Class I, Div., Groups A, B, C, D T6 Class I, Zone 0, Group IIC T6 Class I, Div. and Div., Groups A, B, C, D T6 Class I, Zone 0, Group IIC T6 (Class II Groups E, F, G; Class III if build in BUZH -, AGL- oder AGLH-Kopf) Class I, Div., Groups A, B, C, D, T6 Class I, Div., Groups A,B,C,D T6 (Class II, Groups E, F, G; Class III wenn eingebaut in BUZH-, AGL- oder AGLH-Kopf) ) See. supplement PTB 99 ATEX 9 X

5 Temperature Transmitter, head mounted TH0/TH0-Ex HART programmable, Pt 00 (RTD), thermocouples, electrical isolation 0/-8.9 EN Displays (option in conjunction with AGLHD head) Digital display Process value, sensor value or loop current value indicator Fed through current loop LC display: ½ digits (± 999), digit height 0 mm, 7 segments Standard scaling % Linear scaling for measuring ranges and units possible Description of the physical unit (labels) Digital display CoMeter (HART configurator and LC display) CoMeter (HART configurator and LC display) function keys for request and programming (Code protection) Fed through current loop LC display: 5 digits (± 999), digit height 7,6 mm, 7 segments Sign and floating point 0 segment bargraph (heading of measuring range) 7 digits alphanumeric characters 6 mm, segments Dual function HART transmitter programming unit (all HART functions except for freely configurable characteristic curve and TAG Number) Process value, sensor value or loop current value indicator Request function Process variable, analog and display value, description of measuring point, serial number, error behaviour, lower/upper measuring range limit Change function Sensor type,sensor circuit, measuring range, damping, mains filter, error signalling Special function Zero point adjustment, simulation of output signal, adjustment of output signal, wet calibration Display Digital display CoMeter Response time 0.5 s. s Measuring error ± 0. % ± 0.5 % Overvoltage or 50 % of 5 ma maximum current input range EMC EN Temperature C Humidity %, condensating permitted Mind limits of application Communication/parameterization Hand held terminal HHT 69HT, STT0, HHT75 CoMeter Hart conigurator and LC display Device Management Tool SV0 (SMART VISION) Parameter Sensor type, error signalling, measuring range, general characteristics (i. e. TAG number), damping, signal simulation of output Software interface AMS, Cornerstone CoMeter Processinterface Line resistance GND (50 Ω min.)* (optional) or Isolators Controller Recorders or FSK Modem *if necessary 69HT, STT0, HHT75 Z-06d 5

6 Temperature Transmitter, head mounted TH0/TH0-Ex HART programmable, Pt 00 (RTD), thermocouples, electrical isolation 0/-8.9 EN Connection diagram Us = 8,5...0 V DC - Output...0 ma Microprocessor Reference junction Input - ϑ ϑ K ϑ K ϑ ϑ K K V DC V DC a) b) c) d) e) f) g) h) i) Z-065 a) Resistance thermometer, wire circuit b) Resistance thermometer, wire circuit c) Resistance thermometer, wire circuit d) Double resistance thermometer, wire circuit (average value or differential temperature measurement) e) Potentiometer input, wire circuit f) Thermocouple g) Double thermocouple (average value or differential temperature measurement) h) Voltage measurement i) Double voltage measurement (average value or differential temperature measurement) Dimensional diagram (dimensions im mm) Automation - Products Contrans TH 0 Messumformer/Transmitter/Transducteur,5 5,5 Z-876h 6

7 Temperature Transmitter, head mounted TH0/TH0-Ex HART programmable, Pt 00 (RTD), thermocouples, electrical isolation 0/-8.9 EN Ordering information Catalog No. EUR Deliv. time TH0/TH 0-Ex V58- wks. TH0 (without Ex) 0,50 * Type of protection: intrinsically safe TH0-Ex ATEX Zone : II () G EEx [ia]ib IIC T6 5 7,80 * TH0-Ex N ATEX Zone : II G EEx n A II T6 N 7,80 * TH0-Ex FM IS Class I, Div., Groups A, B, C, D T6 7 7,80 * IS Class I, Zone 0, Group IIC T6 TH0-Ex CSA IS Class I, Div. and Div., Groups A, B, C, D T6 9 7,80 * (Class II Groups E, F, G; Class III If build in BUZH head, AGL head or AGLH head) Nonincendive, Class I, Div., Groups A, B, C, D T6 (Class II, Groups E, F, G; Class III if built in BUZH head, AGL head or AGLH head) TH0-Ex N FM nonincendive, Class I, Div., Groups A, B, C, D T6 M 7,80 * Construction / display Module (h =.5 mm) - Module (h =.5 mm) with sensor connecting line 7,0 * Module (h =.5 mm) with snap-on fixing 9,70 * Module (h = 7.5 mm) for mounting on measuring module Z 5,0 * Module built into connection head or cover with sensor connecting line BUZH head R 0,0 * BUSH head P 0,60 * BUKH-Ex head N,60 * Raised B-head cover L 9,0 * B head (completely head with raised cover) K,90 * AUZH head V 5,60 * AUSH head U 5,80 * AGL head ) without display X 77,80 * AGLHD head ) with digital display D 5,0 * AGLHD head ) with cometer C 98,00 * Attention: The sensor connecting lines correspond to the order for the type of sensor or its type of circuitry Module built into field housing: Aluminium field housing 80 x 75 x 57 mm, IP 65; x M6 x.5 A 70,0 * Polyester field housing 75 x 80 x 55 mm, IP 65; x M6 x.5 9 7,00 * Aluminium field housing 80 x 75 x 57 mm, IP 65; x M6 x.5; x M0 x.5 with separate terminal block F 86,0 * Polyester field housing 75 x 90 x 55 mm, IP 65; x M6 x.5; x M0 x.5 with separate terminal block E 9,50 * Notice: Other field housings with several transmitters or specially for pipe mounting on request. Programming Factory standard parameter Pt 00, C, wire circuit, damping off, direct action characteristic 0 - overranging at sensor or device error ( ma) Customer-specific parameter setting (questionnaire),50 * Calibration certificates without 0 - point 75,60 * 9 point 07,0 * Accessories Catalog No. EUR Deliv. time ABB FSK modem [EEx ib] IIC (parameter setting in the installation) see Data Sheet 0/6-6.7 EN Device Management Tool SV0 (SMART VISION) see Data Sheet 0/6-.0 EN TH0 /-0 /-0 driver for AMS software. (Rosemount) ) ,0 * ) Standard: Aluminium, metal-cable-screw-connection M0 x.5 EEx e; protective pipe connection M x.5 (optional M0 x.5; /" NPT; /" NPT); (do not use for EEx d applications, see data sheet 0/0-.8 EN for EEx d details) ) already integrated in AMS software version 5.0 or higher Notice: For a lokal programming on the desk can used as Hardware the universal FSK-Programming-Set (without Parasoft) (see Data Sheet 0/6-6.7 EN: ordering information). 7

8 The Industrial IT wordmark and all mentioned product names in the form XXXXXX IT are registered or pending trademarks of ABB. ABB has Sales & Customer Support expertise in over 00 countries worldwide. The Company s policy is one of continuous product improvement and the right is reserved to modify the information contained herein without notice. Printed in the Fed. Rep. of Germany (0.0) ABB 00 0/-8.9 EN Rev. A ABB Ltd. Salterbeck Trading Estate Workington, Cumbria CA 5DS UK Tel: (0) Fax: (0) ABB Inc. 5 E. County Line Road Warminster, PA 897 USA Tel: Fax: ABB Automation Products GmbH Borsigstr Alzenau Germany Tel: Fax: