6. Material Description and RoHS Test Report / Page 9 ~ end

Size: px

Start display at page:

Download "6. Material Description and RoHS Test Report / Page 9 ~ end"

Dayna Watts
6 years ago
Views:

Specification For Approval Date: 2014 / 03 / 13 File No.: 140313004 Version: 1.

System Technology Corp. Cortec Technology Inc. 4F. No. 815.Chung Hsiao East Rd.,Sec.

1 Specification For Approval Date: 2014 / 03 / 13 File No.: Version: 1.0 Customer: XW Customer P/N: / INVAX P/N: SMA312-CGT5PB-D Description : Coaxial Connector Cortec Checked By: Customer Approved By: INVAX System Technology Corp. Cortec Technology Inc. 4F. No. 815.Chung Hsiao East Rd.,Sec.5 Xian-Xi Industrial, Sha-Tou Administration Zone, Taipei, TAIWAN Chang-An Town, Dong-Guan City, Guangdong Province, China TEL: FAX: TEL: FAX: Page 1

2 Index: 1. Revision History / Page 3 2. Specification / Page 4 3. Characteristics and Reliability Test / Page 5 4. Test Data / Page 6 5. Mechanical and Packing Drawing / Page 7 ~ 8 6. Material Description and RoHS Test Report / Page 9 ~ end Page 2

3 1. Revision History Revision Date Change Notification Description 1.0 Page 3

4 2. Specification Sample Photo A. Electrical Characteristics Frequency DC~ 6 GHz Impedance 50 Ohm S.W.R. <= 1.3 Insertion Loss <= 0.6 db Voltage (breakdown) > 500V Working Voltage <=170V / 50Hz Insulation Resistance >= 500 M ohm Center Conductor <= 25 m ohm Contact Resistance Outer Conductor <= 15 m ohm Contact Resistance B. Material & Mechanical Characteristics Housing Brass / Au Plated Center Contact Brass / Au Plated Insulator PTFE Mating Cycles > 500 C. Environmental Operation Temperature - 40 C ~ + 65 C Storage Temperature - 40 C ~ + 80 C Page 4

5 3. Characteristics and Reliability Test Test Items Test Condition and Procedure Requirements C1 S.W.R. Set DUT on Network Analyzer; make individual Directive DUT specification calibration to test C2 Insertion Set DUT on Network Analyzer; make individual Directive DUT specification Loss calibration to test C3 Voltage Test voltage should be applied between insulated Max Voltage: >= 500 V Breakdown portions, or between ground as specified. or directive material specification C4 Insulation Test Voltage: 500 ± 50V; between the insulated Resistance >= 500 M ohm Resistance portions, or between ground as specified. or directive material specification C5 DC Air Temp: 25 C; measured with test equipment Directive material specification Resistance C6 Contact Air Temp: 25 C; measured with test equipment Directive material specification Resistance M1 Vibration GB / T No Visual Damage Amplitude: 0.03 inch (1.5mm); Freq: 20 to 80 to 20 Hz 3 directions; 2 hours for each direction M2 Random GB / T No parts separated Drop Height: 1.0 Meter; 3 directions; 1 time for each direction M3 Solderability GB Mounted on PCB Solder iron: 260±5 C; Duration: 5 seconds 2. No Visual Damage M4 Terminal- Holding with individual specification; force applied 1. Directive DUT specification Pull Test to axis of terminal M5 Terminal- Holding with individual specification; applied 1. Directive DUT specification Torque Test clockwise and counterclockwise to the axis of terminal M6 Dimension Inspection of dimension, color, material, package, Directive DUT specification surface process E1 Salt Spray GB / T After 2 Hours Recovery Temp: 35 C; RH: >= 95%; NaCl solution: >= 5%; 1. No Visual Damage Time: 24 hours E2 Humidity GB / T After 2 Hours Recovery Temp: 80 C / 12 H; -40 C / 12H RH: >= 90%; 1. No Visual Damage Time: 24 hours Page 5

6 E3 E4 Thermal Shock Life (High Temp.) GB / T Cycle: - 40 C (30 minutes) to + 80 C (30 minutes) Cycles: 24 GB /T Temp: 80 C; Time: 24 hours After 2 Hours Recovery 1. No Visual Damage After 2 Hours Recovery 1. No Visual Damage R1 RoHS With Reference to IEC 62321:2008 with flow chart Directive RoHS 2011/65/EU R2 PFOS With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC R3 PFOA With Reference to USA EPA 3540C:1996 by LC/MS Directive RoHS 2006/122/EC 4. Samples Test Data Test Items Requirements No.1 No.2 No.3 No.4 No.5 C1 S.W.R. TBD ok ok ok ok ok C2 Insertion Loss TBD ok ok ok ok ok C3 Voltage Breakdown > 500 V > 500 > 500 > 500 > 500 > 500 C4 Insulation Resistance > 500 Mohm > 500 > 500 > 500 > 500 > 500 M4 Pull Force spec ok ok ok ok ok M6 Dimension drawing ok ok ok ok ok 5. Mechanical Drawing See attached files 6. Material Description and RoHS Test Report See attached files Page 6

COR/F-G-47a 物料中 HSF 對象物質含量調查表物料名稱 : SMA312-CGT5PB-D 各構成物料測試報告裡 RoHS 對應物質測試結果序號物料型號物料各構成名稱檢測報告編號測試日期的材質 Cd Pb Hg Cr(VI) PBBs PBDEs 康捷電子有限公司填表 : 時麗部門 : 研發部職務 : 文員測試名稱測試機構名稱銅 60 31000 N.D. Negative CE/2013/73960 2013.

9 COR/F-G-47a 物料中 HSF 對象物質含量調查表物料名稱 : SMA312-CGT5PB-D 各構成物料測試報告裡 RoHS 對應物質測試結果序號物料型號物料各構成名稱檢測報告編號測試日期的材質 Cd Pb Hg Cr(VI) PBBs PBDEs 康捷電子有限公司填表 : 時麗部門 : 研發部職務 : 文員測試名稱測試機構名稱銅 N.D. Negative CE/2013/ REECUTTINGBRASSBA SGS 1 Body 鍍金 N.D. 10 N.D. Negative CANML Au terminal. SGS 2 SMA312-CGT5PB-D Center Pin 銅 N.D. Negative CE/2013/ REECUTTINGBRASSBA SGS 鍍金 N.D. 10 N.D. Negative CANML Au terminal. SGS 3 Insulator PTFE N.D. N.D. N.D. N.D. N.D. N.D. CANEC PTFE ROD SGS 根據測試報告如實填寫鉛鎘汞六價鉻 PBBs 和 PBDEs 六項禁用物質的含量包裝材料中鉛鎘汞六價鉻總含量不超過 100ppm, 鎘的允許濃度為 5ppm 歐盟 ROHS 指令豁免條款 2009/95/BC 钢中合金元素中的铅含量达 0.35% 铝含量达 0.4% 铜合金中的铅含量达 4%

SPECIFICATION 宏致電子股份有限公司桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.)

SPECIFICATION 宏致電子股份有限公司桃園縣中壢市東園路 13 號. No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) SPECIFICATION 宏致電子股份有限公司桃園縣中壢市東園路 13 號 No.13, Dongyuan Rd., Jhongli City, Taoyuan County 320, Taiwan (R.O.C.) TEL: +886-3-463-2808 FAX: +886-3-463-1800 SPEC. NO.: PS-50208-XXXXX-XXX REVISION: J PRODUCT