Table of Contents. MIDI Functions... 2

Transcription

1 DIGITAL PIANO P MIDI Reference MIDI-Referenz Référence MIDI Referencia MIDI Table of Contents MIDI Functions... 2 MIDI Transmit/Receive Channel Selection... 2 Local Control ON/OFF... 2 Program Change ON/OFF... 3 Control Change ON/OFF... 3 MIDI Data Format... 4 MIDI Implementation Chart EN

2 MIDI Functions You can make detailed adjustments to MIDI settings. NOTE For instructions on how to connect this instrument to the computer, refer to the Computer-related Operations downloadable from the Yamaha Downloads website. MIDI Transmit/Receive Channel Selection In any MIDI control setup, the MIDI channels of the transmitting and receiving devices must be matched for proper data transfer. This parameter enables you to specify the channel on which the instrument transmits or receives MIDI data. Setting the Transmit Channel While simultaneously holding down the [METRONOME] and [RHYTHM] buttons, press one of the C4 D#4 keys. Default setting: 1 Setting the Receive Channel While simultaneously holding down the [METRONOME] and [RHYTHM] buttons, press one of the F4 A4 keys. Default setting: ALL C0 C1 C2 C3 C4 C5 C6 C7 MIDI transmission channels in Dual, Split or Duo Voice 1 data is transmitted on its specified channel and Voice 2 data is transmitted on the next greater channel number relative to the specified channel. In this case, no data is transmitted if the transmit channel is set to OFF. ALL: Multi-timbre Receive. This allows simultaneous reception of different parts on all 16 MIDI channels, enabling the instrument to play multi-channel song data received from a computer. 1+2: 1+2 Receive. This allows simultaneous reception on channels 1 and 2 only, enabling the instrument to play 1 and 2channel song data received from a computer. Channel 1 Off C4 Channel Program change and other like channel messages received will not affect the panel settings of the instrument or the notes you play on the keyboard. Data for the Demo s and Preset s cannot be transmitted via MIDI. C#4 D#4 F#4 G#4 C4 D4 F4 G4 A4 1 step down 1 step up 1 step ALL down 1 step up Transmit Channel Receive Channel Local Control ON/OFF Local Control refers to the fact that, normally, the keyboard of the instrument controls its internal tone generator, allowing the internal voices to be played directly from the keyboard. This situation is Local Control On, since the internal tone generator is controlled locally by its own keyboard. Local control can be turned OFF, however, so that the keyboard of the instrument does not play the internal voices, but the appropriate MIDI information is still transmitted via the [USB TO HOST] terminal when notes are played on the keyboard. At the same time, the internal tone generator responds to MIDI information received via the [USB TO HOST] terminal. While simultaneously holding down the [METRONOME] and [RHYTHM] buttons, press the C5 key. Pressing the C5 key repeatedly toggles between Local Control On and Off. Default setting: ON C0 C1 C2 C3 C4 C5 C6 C7 C5 2 P-125 MIDI Reference

3 MIDI Functions Program Change ON/OFF Normally the instrument will respond to MIDI program change numbers received from a computer, causing the same numbered voice to be selected on the corresponding channel (the keyboard voice does not change). The instrument will normally also send a MIDI program change number whenever one of its voices is selected, causing the same numbered voice or program to be selected on the computer if the computer is set up to receive and respond to MIDI program change numbers. This function makes it possible to cancel program change number reception and transmission so that voices can be selected on the instrument without affecting the computer. While simultaneously holding down the [METRONOME] and [RHYTHM] buttons, press the C#5 key. Pressing the C#5 key repeatedly toggles between Program Change On and Off. C#5 C0 C1 C2 C3 C4 C5 C6 C7 For information on program change numbers for each of the Voices of the instrument, refer to page 4. Default setting: ON Control Change ON/OFF Normally the instrument will respond to MIDI control change data received from a computer, causing the voice on the corresponding channel to be affected by pedal and other control settings received from the controlling device (the keyboard voice is not affected). The instrument also transmits MIDI control change information when the pedal or other appropriate controls are operated. This function makes it possible to cancel control change data reception and transmission so that, for example, the pedal of the instrument and other controls can be operated without affecting a computer. While simultaneously holding down the [METRONOME] and [RHYTHM] buttons, press the D5 key. Pressing the D5 key repeatedly toggles between Control Change On and Off. C0 C1 C2 C3 C4 C5 C6 C7 For information on control changes that can be used with the instrument, refer to page 4. Default setting: ON D5 P-125 MIDI Reference 3

4 Many MIDI messages listed in the MIDI Data Format are expressed in decimal numbers, binary numbers and hexadecimal numbers. Hexadecimal numbers may include the letter H as a suffix. Also, n can freely be defined as any whole number. To enter data/values, refer to the table below. decimal hexadecimal binary decimal hexadecimal binary decimal hexadecimal binary decimal hexadecimal binary A A A A B B B B C C C C D D D D E E E E F F F F A A A A B B B B C C C C D D D D E E E E F F F F Except the table above, for example (decimal)/9nH/ (binary) denotes the Note On Message for each channel (1-16) /BnH/ denotes the Control Change Message for each channel (1-16) /CnH/ denotes the Program Change Message for each channel (1-16). 240/FOH/ denotes the start of a System Exclusive Message. 247/ F7H/ denotes the end of a System Exclusive Message. aah (hexadecimal)/0aaaaaaa (binary) denotes the data address. The address contains High, Mid, and Low. bbh/0bbbbbbb denotes the byte count. cch/0ccccccc denotes the check sum. ddh/0ddddddd denotes the data/value. Preset Voice List Program change numbers are often specified as numbers Since this list uses a numbering system, in such cases it is necessary to subtract 1 from the transmitted program change numbers to select the appropriate sound: e.g. to select Live Grand in the list below, transmit program change number 1. Voice Button Voice Name MSB (0-127) LSB (0-127) Program Change # (1-128) [PIANO] Grand Piano Live Grand Ballad Grand Bright Grand [E.PIANO] Stage E.Piano D E.Piano Vintage E.Piano Synth Piano [ORGAN] Jazz Organ Rock Organ Organ Principal Organ Tutti [CLV./VIB.] Harpsichord Harpsi E.Clavichord Vibraphone [STRINGS] Strings Slow Strings Choir Synth Pad [+BASS] Acoustic Bass Electric Bass Bass & Cymbal Fretless Bass P-125 MIDI Reference

5 MIDI CHANNEL MESSAGE (1) Application Range MIDI, Internal Sequencer MIDI Events Status byte 1st Data byte 2nd Data byte Status Data (HE) Data (HE) MIDI Formats Main Layer Key Off 8nH (n:channel Number) Key On 9nH (n:channel Number) kk Key no. (0-127) vv Velocity(0-127) [GM1] kk Key no. (0-127) vv Key On :vv=1-127 Key Off :vv=0 [GM1] O O (Keyboard) O O (Keyboard) Control Change BnH 0 (00H) Bank Select MSB (00H...7FH) (00) Normal O O 1 (01H) Modulation (00H...7FH) Data [GM1] O 5 (05H) Portamento Time (00H...7FH) Data O 6 (06H) Data Entry MSB (00H...7FH) Data O Mode Message BnH (n:channel Number) Program Change CnH (n:channel Number) Channel After Touch Polyphonic After Touch Pitch Bend Change DnH AnH EnH (n:channel Number) (n:channel Number) (n:channel Number) 7 (07H) Main Volume (00H...7FH) Data [GM1] 10 (0AH) Panpot (00H...7FH) L64 C R63 [GM1] 11 (0BH) Expression (00H...7FH) Data [GM1] O O O O (Duo) O 32 (20H) Bank Select LSB (00H...7FH) Data O O 38 (26H) Data Entry LSB (00H...7FH) Data O 64 (40H) Sustain(Damper) (00H...7FH) Data [GM1] 65 (41H) Portamento (00H...7FH) , (OFF, ON) 66 (42H) Sostenuto (00H...7FH) , (OFF, ON) 67 (43H) Soft Pedal (00H...7FH) , (OFF, ON) O O (Pedal) O O O (Pedal) O O (Pedal) 71 (47H) Harmonic Content (00H...7FH) O 72 (48H) Release Time (00H...7FH) O 73 (49H) Attack Time (00H...7FH) O 74 (4AH) Brightness (00H...7FH) O 75 (4BH) Decay Time (00H...7FH) O 76 (4CH) Vibrate Rate (00H...7FH) O 77 (4DH) Vibrate Depth (00H...7FH) O 78 (4EH) Vibrate Delay (00H...7FH) O 84 (54H) Portamento Control (00H...7FH) Key no. (0-127) O 91 (5BH) Effect1 Depth (Reverb Send Level) 93 (5DH) Effect3 Depth (Chorus Send Level) 94 (5EH) Effect4 Depth (Variation Send Level) (00H...7FH) Data O O (00H...7FH) Data O O (00H...7FH) Data O 96 (60H) RPN Increment - - The data byte is O ignored. 97 (61H) RPN Decrement - - The data byte is O ignored. 98 (62H) NRPN LSB (00H...7FH) Data O 99 (63H) NRPN MSB (00H...7FH) Data O 100 (64H) RPN LSB (00H...7FH) Data O 101 (65H) RPN MSB (00H...7FH) Data O 120 (78H) All Sound Off 0 (00H) Data O 121 (79H) Reset All Controllers 0 (00H) Data [GM1] 122 (7AH) Local Control (00H) (7FH) OFF ON O O 123 (7BH) All Note Off 0 (00H) Data [GM1] O 124 (7CH) Omni Off 0 (00H) Data O 125 (7DH) Omni On 0 (00H) Data O 126 (7EH) Mono 0-16 (00H...10H) Data O 127 (7FH) Poly 0 (00H) Data O pp (00H...7FH) Voice number (0-127) [GM1] vv (00H...7FH) Data [GM1] O O O kk (00H...7FH) Key no. (0-127) vv (00H...7FH) Data O cc (00H...7FH) LSB dd (00H...7FH) MSB [GM1] O Realtime Message F8H MIDI Clock O FAH Start O O FBH Continue FCH Stop O O FEH Active Sens O O FFH System Reset P-125 MIDI Reference 5

6 MIDI CHANNEL MESSAGE (2) Application Range MIDI, Internal Sequencer NRPN (Non Registered Number) NRPN Data Entry MSB LSB MSB LSB MIDI Data Range Formats 01H 08H mmh -- Vibrato Rate mm : 00H-40H-7FH ( ) O 01H 09H mmh -- Vibrato Depth mm : 00H-40H-7FH ( ) O 01H 0AH mmh -- Vibrato Delay mm : 00H-40H-7FH ( ) O 01H 20H mmh -- Low Pass Filter Cutoff Frequency mm : 00H-40H-7FH ( ) O 01H 21H mmh -- Low Pass Filter Resonance mm : 00H-40H-7FH ( ) O 01H 30H mmh -- EQ BASS mm : 00H-40H-7FH ( ) O 01H 31H mmh -- EQ TREBLE mm : 00H-40H-7FH ( ) O 01H 34H mmh -- EQ BASS Frequency mm : 04H-28H ( k[Hz]) O 01H 35H mmh -- EQ TREBLE Frequency mm : 1CH-3AH ( k[Hz]) O 01H 63H mmh -- EG Attack Time mm : 00H-40H-7FH ( ) O 01H 64H mmh -- EG Decay Time mm : 00H-40H-7FH ( ) O 01H 66H mmh -- EG Release mm : 00H-40H-7FH ( ) O 14H rrh mmh -- Drum Low Pass Filter Cutoff Frequency rr : drum instrument note number O mm : 00H-40H-7FH ( ) 15H rrh mmh -- Drum Low Pass Filter Resonance rr : drum instrument note number O mm : 00H-40H-7FH ( ) 16H rrh mmh -- Drum EG Attack Rate rr : drum instrument note number O mm : 00H-40H-7FH ( ) 17H rrh mmh -- Drum EG Decay Rate rr : drum instrument note number O mm : 00H-40H-7FH ( ) 18H rrh mmh -- Drum Pitch Coarse rr : drum instrument note number O mm : 00H-40H-7FH ( ) 19H rrh mmh -- Drum Pitch Fine rr : drum instrument note number O mm : 00H-40H-7FH ( ) 1AH rrh mmh -- Drum Level rr : drum instrument note number O mm : 00H-7FH ( ) 1CH rrh mmh -- Drum Pan rr : drum instrument note number O mm : 00H, 01H-40H-7FH (RND, L63...C...R63) 1DH rrh mmh -- Drum Reverb Send Level rr : drum instrument note number O mm : 00H-7FH ( ) 1EH rrh mmh -- Drum Chorus Send Level rr : drum instrument note number O mm : 00H-7FH ( ) 1FH rrh mmh -- Drum Variation Send Level rr : drum instrument note number O mm : 00H-7FH ( ) 24H rrh mmh -- Drum HPF Cutoff Frequency rr : drum instrument note number O mm : 00H-40H-7FH ( ) 30H rrh mmh -- Drum EQ Bass Gain rr : drum instrument note number mm : 00H-7FH ( ) 31H rrh mmh -- Drum EQ Treble Gain rr : drum instrument note number mm : 00H-7FH ( ) 34H rrh mmh -- Drum EQ Bass Frequency rr : drum instrument note number mm : 04H-28H ( k[Hz]) 35H rrh mmh -- Drum EQ Treble Frequency rr : drum instrument note number mm : 1CH-3AH ( k[Hz]) 40H rrh mmh -- Drum VELOCITY PITCH SENS. rr : drum instrument note number mm : 00H-0FH (0...15) 41H rrh mmh -- Drum VELOCITY LPF CUTOFF SENS. rr : drum instrument note number mm : 00H-0FH (0...15) NRPN MSB: 14H-1FH (for drums) message is accepted as long as the channel is set with a drum voice. Data Entry LSB: Ignored. RPN (Registered Number) NRPN Data Entry MIDI Data Range Formats MSB LSB MSB LSB 00H 00H mmh -- Pitch Bend Sensitivity mm : 00H-18H ( [semitones]) [GM1] 00H 01H mmh llh Fine Tune mm ll : 00H 00H -100[cent]... mm ll : 40H 00H 0[cent]... mm ll : 7FH 7FH 100[cent] [GM1] (respond/ignored) (generated data) O O 00H 02H mmh -- Coarse Tune mm : 28H-40H-58H ( [semitones]) [GM1] O 00H 05H mmh llh Modulation Sensitivity mm : Specified in semitone steps O ll : Specified in 100/128 cent steps 7FH 7FH Null - O 6 P-125 MIDI Reference

7 MIDI PARAMETER CHANGE TABLE Application Range MIDI, Internal Sequencer * Not Received when Receive SysEx is set to off. * Not transmitted when Transmit SysEx is set to off. MIDI Change table (G SYSTEM) Address Size Data F 00-0F 00-0F 00-0F MASTER TUNE [cent] 1st bit3-0 bit nd bit3-0 bit11-8 3rd bit3-0 bit7-4 4th bit3-0 bit3-0 G Default F MASTER VOLUME F O F MASTER ATTENUATOR TRANSPOSE [semitones] 40 O 7D 1 N DRUM SETUP RESET N:Drum setup number - O 7E 1 00 G SYSTEM ON 00=G system ON - O 7F 1 00 ALL PARAMETER RESET 00=ON - O TOTAL SIZE 07 * setting value O MIDI Change table (SYSTEM INFORMATION) Address D Size Data E 20-7F F Model Name 1... Model Name 14 0E 1 NOT USED 0F 1 NOT USED TOTAL SIZE 10 Transmitted in response to Dump Request. Not received (ASCII CHARACTER) (ASCII CHARACTER) - - MIDI Change table (EFFECT1) Address Size Data G Default F REVERB TYPE MSB Refer to Effect Type List (page 15). 01(=HALL1) O O 00-7F REVERB TYPE LSB Refer to Effect Type List (page 15). 00 (Reverb Type) F REVERB PARAMETER 1 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 2 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 3 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 4 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 5 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 6 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 7 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 8 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) 0A F REVERB PARAMETER 9 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) 0B F REVERB PARAMETER 10 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) 0C F REVERB RETURN - db...0db...+6db( ) 40 O 0D F REVERB PAN L63...C...R63 40 O TOTAL SIZE 0E F REVERB PARAMETER 11 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 12 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 13 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 14 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 15 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) F REVERB PARAMETER 16 Refer to Effect Type List (page 15). Depends on Reverb Type. O (Depends on Reverb Type.) TOTAL SIZE 06 Address Size Data G Default F CHORUS TYPE MSB Refer to Effect Type List (page 15). 41(=CHORUS1) O O 00-7F CHORUS TYPE LSB Refer to Effect Type List (page 15) F CHORUS PARAMETER 1 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 2 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 3 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 4 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 5 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 6 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 7 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 8 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) 2A F CHORUS PARAMETER 9 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) 2B F CHORUS PARAMETER 10 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) 2C F CHORUS RETURN - db...0db...+6db( ) 40 O 2D F CHORUS PAN L63...C...R63 40 O 2E F SEND CHORUS TO REVERB - db...0db...+6db( ) 00 O TOTAL SIZE 0F P-125 MIDI Reference 7

8 F CHORUS PARAMETER 11 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 12 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 13 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 14 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 15 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) F CHORUS PARAMETER 16 Refer to Effect Type List (page 15). Depends on Chorus Type. O (Depends on Chorus Type.) TOTAL SIZE 06 Address Size Data G Default F VARIATION TYPE MSB Refer to Effect Type List (page 15). 05(=DELAY L,C,R) O 00-7F VARIATION TYPE LSB Refer to Effect Type List (page 15) F VARIATION PARAMETER 1 MSB Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) 00-7F VARIATION PARAMETER 1 LSB Refer to Effect Type List (page 15) F VARIATION PARAMETER 2 MSB Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) 00-7F VARIATION PARAMETER 2 LSB Refer to Effect Type List (page 15) F VARIATION PARAMETER 3 MSB Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) 00-7F VARIATION PARAMETER 3 LSB Refer to Effect Type List (page 15) F VARIATION PARAMETER 4 MSB Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) 00-7F VARIATION PARAMETER 4 LSB Refer to Effect Type List (page 15). 4A F VARIATION PARAMETER 5 MSB Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) 00-7F VARIATION PARAMETER 5 LSB Refer to Effect Type List (page 15). 4C F VARIATION PARAMETER 6 MSB Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) 00-7F VARIATION PARAMETER 6 LSB Refer to Effect Type List (page 15). 4E F VARIATION PARAMETER 7 MSB Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) 00-7F VARIATION PARAMETER 7 LSB Refer to Effect Type List (page 15) F VARIATION PARAMETER 8 MSB Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) 00-7F VARIATION PARAMETER 8 LSB Refer to Effect Type List (page 15) F VARIATION PARAMETER 9 MSB Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) 00-7F VARIATION PARAMETER 9 LSB Refer to Effect Type List (page 15) F VARIATION PARAMETER 10 MSB Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) 00-7F VARIATION PARAMETER 10 LSB Refer to Effect Type List (page 15) F VARIATION RETURN - db...0db...+6db( ) 40 O F VARIATION PAN L63...C...R63 40 O F SEND VARIATION TO REVERB - db...0db...+6db( ) 00 O F SEND VARIATION TO CHORUS - db...0db...+6db( ) 00 O 5A VARIATION CONNECTION INSERTION, SYSTEM 00 O 5B F VARIATION PART NUMBER Reception : Part1...16(0...15) Transmission : Part1...16(0...15) AD(64) OFF(127) 7F O TOTAL SIZE 21 TOTAL SIZE 06 5C F MW VARIATION CONTROL DEPTH O 5D F BEND VARIATION CONTROL DEPTH O 5E F CAT VARIATION CONTROL DEPTH O 5F F AC1 VARIATION CONTROL DEPTH O F AC2 VARIATION CONTROL DEPTH O F VARIATION PARAMETER 11 Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) F VARIATION PARAMETER 12 Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) F VARIATION PARAMETER 13 Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) F VARIATION PARAMETER 14 Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) F VARIATION PARAMETER 15 Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) F VARIATION PARAMETER 16 Refer to Effect Type List (page 15). Depends on Variation Type. O (Depends on Variation Type.) MIDI Change table (MULTI EQ) * The MULTI EQ Address Size Data cannot be reset to its factory setting with G SYSTEM ON EQ TYPE flat, jazz, pops, rock, classic C EQ GAIN [dB] EQ FREQUENCY k[Hz] EQ Q EQ SHAPE1 shelving, peaking C EQ GAIN [dB] E-36 EQ FREQUENCY k[Hz] EQ Q NOT USED C EQ GAIN [dB] 0A 1 0E-36 EQ FREQUENCY k[Hz] 0B EQ Q C 1 NOT USED D C EQ GAIN [dB] 0E 1 0E-36 EQ FREQUENCY k[Hz] 0F EQ Q NOT USED C EQ GAIN [dB] C-3A EQ FREQUENCY5 0.5k k[Hz] EQ Q EQ SHAPE5 shelving, peaking TOTAL SIZE 15 8 P-125 MIDI Reference

9 MIDI Change table (EFFECT2) * The EFFECT 2 Address Size Data cannot be reset to its factory setting with G SYSTEM ON. 03 n F INSERTION EFFECT TYPE MSB Refer to Effect Type List (page 15). O O 00-7F INSERTION EFFECT TYPE LSB Refer to Effect Type List (page 15) F INSERTION EFFECT PARAMETER 1 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 2 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 3 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 4 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 5 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 6 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 7 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 8 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O 0A F INSERTION EFFECT PARAMETER 9 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O 0B F INSERTION EFFECT PARAMETER 10 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O TOTAL SIZE 12 0C F INSERTION EFFECT PART NUMBER Reception : Part1...16(0...15) Transmission : Part1...16(0...15) AD(64) OFF(127) 0D F MW INSERTION CONTROL DEPTH O 0E F BEND INSERTION CONTROL DEPTH O 0F F CAT INSERTION CONTROL DEPTH O F AC1 INSERTION CONTROL DEPTH O O F AC2 INSERTION CONTROL DEPTH O O O TOTAL SIZE F INSERTION EFFECT PARAMETER 11 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 12 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 13 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 14 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 15 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 16 Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O F INSERTION EFFECT PARAMETER 1 MSB Refer to Effect Type List (page 15). O (Depends on Insertion Type.) 00-7F INSERTION EFFECT PARAMETER 1 LSB Refer to Effect Type List (page 15) F INSERTION EFFECT PARAMETER 2 MSB Refer to Effect Type List (page 15). O (Depends on Insertion Type.) 00-7F INSERTION EFFECT PARAMETER 2 LSB Refer to Effect Type List (page 15) F INSERTION EFFECT PARAMETER 3 MSB Refer to Effect Type List (page 15). O (Depends on Insertion Type.) 00-7F INSERTION EFFECT PARAMETER 3 LSB Refer to Effect Type List (page 15) F INSERTION EFFECT PARAMETER 4 MSB Refer to Effect Type List (page 15). O (Depends on Insertion Type.) 00-7F INSERTION EFFECT PARAMETER 4 LSB Refer to Effect Type List (page 15) F INSERTION EFFECT PARAMETER 5 MSB Refer to Effect Type List (page 15). O (Depends on Insertion Type.) 00-7F INSERTION EFFECT PARAMETER 5 LSB Refer to Effect Type List (page 15). 3A F INSERTION EFFECT PARAMETER 6 MSB Refer to Effect Type List (page 15). O (Depends on Insertion Type.) 00-7F INSERTION EFFECT PARAMETER 6 LSB Refer to Effect Type List (page 15). 3C F INSERTION EFFECT PARAMETER 7 MSB Refer to Effect Type List (page 15). O (Depends on Insertion Type.) 00-7F INSERTION EFFECT PARAMETER 7 LSB Refer to Effect Type List (page 15). 3E F INSERTION EFFECT PARAMETER 8 MSB Refer to Effect Type List (page 15). O (Depends on Insertion Type.) 00-7F INSERTION EFFECT PARAMETER 8 LSB Refer to Effect Type List (page 15) F INSERTION EFFECT PARAMETER 9 MSB Refer to Effect Type List (page 15). O (Depends on Insertion Type.) 00-7F INSERTION EFFECT PARAMETER 9 LSB Refer to Effect Type List (page 15) F INSERTION EFFECT PARAMETER 10 MSB Refer to Effect Type List (page 15). O (Depends on Insertion Type.) O 00-7F INSERTION EFFECT PARAMETER 10 LSB Refer to Effect Type List (page 15). TOTAL SIZE 14 The second byte of the address is considered as an Insertion effect number. n : insertion effect number The Insertion Effect No. range is from 0 to 1. Values outside the range are handled as unknown and ignored. For effect types that do not require MSB, the s for Address 02-0B will be received and the s for Address will not be received. For effect types that require MSB, the s for Address will be received and the s for Address 02-0B will not be received. When bulk dumps that include Effect Type data are transmitted, the parameters for addresses 02-0B will always be transmitted. For effects that require MSB however, when a bulk dump is received, the parameters for addresses 02-0B will not be received. P-125 MIDI Reference 9

10 MIDI Change table (MULTI PART) Address Size Data G Default 08 nn NOT USED F BANK SELECT MSB part10=7f, other parts=00 O F BANK SELECT LSB O F PROGRAM NUMBER O F, Rcv CHANNEL , OFF Part No. O 7F MONO/POLY MODE MONO, POLY 01 O SAME NOTE NUMBER KEY ON ASSIGN SINGLE, MULTI, INST(for Drum) 01 O PART MODE NORMAL, DRUM, DRUMS1...2 part10=02, other parts=00 O O NOTE SHIFT [semitones] 40 O F DETUNE [Hz] O 00-0F 1st bit3-0 bit7-4 0B F VOLUME O 0C F VELOCITY SENSE DEPTH O O 0D F VELOCITY SENSE OFFSET O O 0E F PAN RND,L63...C...R63 40 O 0F F NOTE LIMIT LOW C-2...G8 00 O F NOTE LIMIT HIGH C-2...G8 7F O F DRY LEVEL F O F CHORUS SEND O F REVERB SEND O F VARIATION SEND O F VIBRATO RATE O F VIBRATO DEPTH O F VIBRATO DELAY O F FILTER CUTOFF FREQUENCY O F FILTER RESONANCE O 1A F EG ATTACK TIME O 1B F EG DECAY TIME O 1C F EG RELEASE TIME O 1D MW PITCH CONTROL [semitones] 40 O 1E F MW LOW PASS FILTER CONTROL [cent] 40 O 1F F MW AMPLITUDE CONTROL [%] 40 O F MW LFO PMOD DEPTH A O F MW LFO FMOD DEPTH O F MW LFO AMOD DEPTH O BEND PITCH CONTROL [semitones] 42 O F BEND LOW PASS FILTER CONTROL [cent] 40 O F BEND AMPLITUDE CONTROL [%] 40 O F BEND LFO PMOD DEPTH O F BEND LFO FMOD DEPTH O F BEND LFO AMOD DEPTH O TOTAL SIZE Rcv PITCH BEND OFF, ON 01 O Rcv CH AFTER TOUCH(CAT) OFF, ON 01 O Rcv PROGRAM CHANGE OFF, ON 01 O Rcv CONTROL CHANGE OFF, ON 01 O Rcv POLY AFTER TOUCH(PAT) OFF, ON 01 O Rcv NOTE MESSAGE OFF, ON 01 O Rcv RPN OFF, ON 01 O Rcv NRPN OFF, ON Gmode=01, GMmode=00 O Rcv MODULATION OFF, ON 01 O Rcv VOLUME OFF, ON 01 O 3A Rcv PAN OFF, ON 01 O 3B Rcv EPRESSION OFF, ON 01 O 3C Rcv HOLD1 OFF, ON 01 O 3D Rcv PORTAMENTO OFF, ON 01 O 3E Rcv SOSTENUTO OFF, ON 01 O 3F Rcv SOFT PEDAL OFF, ON 01 O Rcv BANK SELECT OFF, ON 01 O F SCALE TUNING C [cent] 40 O F SCALE TUNING C# [cent] 40 O F SCALE TUNING D [cent] 40 O F SCALE TUNING D# [cent] 40 O F SCALE TUNING E [cent] 40 O F SCALE TUNING F [cent] 40 O F SCALE TUNING F# [cent] 40 O F SCALE TUNING G [cent] 40 O F SCALE TUNING G# [cent] 40 O 4A F SCALE TUNING A [cent] 40 O 4B F SCALE TUNING A# [cent] 40 O 4C F SCALE TUNING B [cent] 40 O 4D CAT PITCH CONTROL [semitones] 40 O 4E F CAT LOW PASS FILTER CONTROL [cent] 40 O 4F F CAT AMPLITUDE CONTROL [%] 40 O F CAT LFO PMOD DEPTH O F CAT LFO FMOD DEPTH O F CAT LFO AMOD DEPTH O PAT PITCH CONTROL [semitones] 40 O F PAT LOW PASS FILTER CONTROL [cent] 40 O P-125 MIDI Reference

11 TOTAL SIZE F PAT AMPLITUDE CONTROL [%] 40 O F PAT LFO PMOD DEPTH O F PAT LFO FMOD DEPTH O F PAT LFO AMOD DEPTH O F AC1 CONTROLLER NUMBER O O 5A AC1 PITCH CONTROL [semitones] 40 O 5B F AC1 LOW PASS FILTER CONTROL [cent] 40 O 5C F AC1 AMPLITUDE CONTROL [%] 40 O 5D F AC1 LFO PMOD DEPTH O 5E F AC1 LFO FMOD DEPTH O 5F F AC1 LFO AMOD DEPTH O F AC2 CONTROLLER NUMBER O AC2 PITCH CONTROL [semitones] 40 O F AC2 LOW PASS FILTER CONTROL [cent] 40 O F AC2 AMPLITUDE CONTROL [%] 40 O F AC2 LFO PMOD DEPTH O F AC2 LFO FMOD DEPTH O F AC2 LFO AMOD DEPTH O PORTAMENTO SWITCH OFF, ON 00 O F PORTAMENTO TIME O F PITCH EG INITIAL LEVEL O 6A F PITCH EG ATTACK TIME O 6B F PITCH EG RELEASE LEVEL O 6C F PITCH EG RELEASE TIME O 6D F VELOCITY LIMIT LOW O 6E F VELOCITY LIMIT HIGH F O 3F 70 1 NOT USED NOT USED F EQ BASS GAIN -12dB...+12dB 40 O F EQ TREBLE GAIN -12dB...+12dB 40 O TOTAL SIZE 04 TOTAL SIZE 74 1 NOT USED NOT USED EQ BASS FREQUENCY k[Hz] 0C O C-3A EQ TREBLE FREQUENCY k[Hz] 36 O 78 1 NOT USED NOT USED A 1 NOT USED B 1 NOT USED C 1 NOT USED D 1 NOT USED E 1 NOT USED F 1 NOT USED C 0A nn F MW OFFSET LEVEL CONTROL [%] 40 O F BEND OFFSET LEVEL CONTROL [%] 40 O F CAT OFFSET LEVEL CONTROL [%] 40 O F PAT OFFSET LEVEL CONTROL [%] 40 O F AC1 OFFSET LEVEL CONTROL [%] 40 O F AC2 OFFSET LEVEL CONTROL [%] 40 O TOTAL SIZE 06 nn = PART NUMBER If there is a Drum Voice assigned to the part, the following parameters are ineffective. BANK SELECT LSB PORTAMENTO MONO/POLY SCALE TUNING POLY AFTER TOUCH PITCH EG P-125 MIDI Reference 11

12 MIDI Change table (DRUM SETUP) Address Size Data G Default 3n rr F PITCH COARSE O O F PITCH FINE [cent] 40 O O F LEVEL Depends on the note. O O F ALTERNATE GROUP OFF, Depends on the note. O O F PAN RND, L63...C...R63 Depends on the note. O O F REVERB SEND Depends on the note. O O F CHORUS SEND Depends on the note. O O F VARIATION SEND F O O KEY ASSIGN SINGLE, MULTI 00 O O Rcv NOTE OFF OFF, ON Depends on the note. O O 0A Rcv NOTE ON OFF, ON 01 O O 0B F LOW PASS FILTER CUTOFF FREQUENCY O O 0C F LOW PASS FILTER RESONANCE O O 0D F EG ATTACK RATE O O 0E F EG DECAY1 RATE O O 0F F EG DECAY2 RATE O O TOTAL SIZE 10 TOTAL SIZE F EQ BASS GAIN [dB] F EQ TREBLE GAIN [dB] NOT USED NOT USED EQ BASS FREQUENCY k[Hz] 0C C-3A EQ TREBLE FREQUENCY k[Hz] NOT USED NOT USED NOT USED NOT USED A 1 NOT USED B 1 NOT USED C 1 NOT USED D 1 NOT USED E n:drum Setup Number (0-1) rr:note number(0d-5b) In the following cases, the instrument will initialize all Drum Setups. G SYSTEM ON received GM SYSTEM ON received GM LEVEL2 SYSTEM ON received GS RESET received DRUM SETUP RESET received (only when in G mode) NOTICE When a part to which a Drum Setup is assigned receives a program change, the assigned Drum Setup will be initialized. If the same Drum Setup is assigned to two or more parts, changes in Drum Setup parameters (including program changes) will apply to all parts to which it is assigned. 12 P-125 MIDI Reference

13 System Exclusive Messages (1) Application Range MIDI, Internal Sequencer * Not Received when Receive SysEx is set to off. * Not transmitted when Transmit SysEx is set to off. System Exclusive Messages (Universal Non-Real Time Messages) MIDI Event Data Format GM1 System On F0 7E N F E = Universal Non-Real Time 0xxxnnnn N = When N is received N=0-F,whichever is received. =ignored = Sub-ID #1=General MIDI Message = Sub-ID #2=General MIDI On General MIDI System Off F0 7E N F E = Universal Non-Real Time 0xxxnnnn N = When N is received N=0-F,whichever is received. =ignored = Sub-ID #1=General MIDI Message = Sub-ID #2=General MIDI Off *1 Changed to G, and output. MIDI Formats [GM1] [GM1] O *1 O *1 P-125 MIDI Reference 13

14 System Exclusive Messages (2) Application Range MIDI, Internal Sequencer * Not Received when Receive SysEx is set to off. * Not transmitted when Transmit SysEx is set to off. System Exclusive Messages (G) MIDI Event Data Format G Change F0 43 1n 4C hh mm ll dd... F7 0001nnnn 1n = Device Number n=always 0(when transmit), n=0-f(when receive) C = Model ID 0hhhhhhh hh = Address High 0mmmmmmm mm = Address Mid 0lllllll ll = Address Low 0ddddddd dd = Data G Bulk Dump F0 43 0n 4C aa bb hh mm ll dd... dd cc F7 0000nnnn 0n = Device Number n=always 0(when transmit), n=0-f(when receive) C = Model ID 0aaaaaaa aa = Byte Count MSB 0bbbbbbb bb = Byte Count LSB 0hhhhhhh hh = Address High 0mmmmmmm mm = Address Mid 0lllllll ll = Address Low 0ddddddd dd = Data ddddddd dd = Data 0ccccccc cc = Checksum G Request F0 43 3n 4C hh mm ll F7 0011nnnn 3n = Device Number n=always 0(when transmit), n=0-f(when receive) C = Model ID 0hhhhhhh hh = Address High 0mmmmmmm mm = Address Mid 0lllllll ll = Address Low G Dump Request F0 43 2n 4C hh mm ll F7 0010nnnn 2n = Device Number n=always 0(when transmit), n=0-f(when receive) C = Model ID 0hhhhhhh hh = Address High 0mmmmmmm mm = Address Mid 0lllllll ll = Address Low O *Refer to Change Table. O *Refer to Change Table. O *Refer to Change Table. (However, the request for address 0A nn 4v will be ignored.) O *Refer to Change Table. (However, the request for address 0A nn 40 will be ignored.) O *Refer to Change Table. O *Refer to Change Table. System Exclusive Messages (Others) MIDI Event Data Format MIDI Master Tuning F0 43 1n mm ll cc F7 0001nnnn 1n n= always 0(when transmit), n=0-f(when receive) = Model ID of TG = Address High = Address Mid = Address Low 0000mmmm 0m = Master Tune MSB 0000llll 0l = Master Tune LSB 0ccccccc cc = don't care (effective or not for each part) (generated data) O 14 P-125 MIDI Reference

15 System Exclusive Messages (Preset Voice) MIDI Event * For each Depth value, the reset value is 40H = voice parameter Data Format String Resonance Depth F n 02 dd F = Clavinova ID = Model ID (Clavinova common ID) = SubID = SubID 0000nnnn 0n = Channel (00-0F) = SubID(String Resonance Depth) 0ddddddd dd = Depth(00-48) Sustain Sample Depth F n 03 dd F = Clavinova ID = Model ID (Clavinova common ID) = SubID = SubID 0000nnnn 0n = Channel (00-0F) = SubID(Sustain Sample Depth) 0ddddddd dd = Depth(00-48) Key Off Sampling Depth F n 04 dd F = Clavinova ID = Model ID (Clavinova common ID) = SubID = SubID 0000nnnn 0n = Channel (00-0F) = SubID(Key Off Sampling Depth) 0ddddddd dd = Depth(00-50) Soft Pedal Depth F n 05 dd F = Clavinova ID = Model ID (Clavinova common ID) = SubID = SubID 0000nnnn 0n = Channel (00-0F) = SubID(Soft Pedal Depth) 0ddddddd dd = Depth(00-7F) (effective or not for each part) (generated data) O (Damper Resonance) O O Effect Type List() Reverb Type List Effect Name Decimal Hex MSB LSB MSB LSB Off 0 0 0H 0H Recital Hall H 18H Concert Hall 1 4 1H 4H Chamber H 18H Club H 18H DSP Type List Decimal Hex Effect Name MSB LSB MSB LSB Damper Resonance BH 8H P-125 MIDI Reference 15

16 MIDI Implementation Chart YAMAHA [ Digital Piano ] [ Portable Keyboar d Date:10-AUG-2017 Model P-125 MIDI Implementation Chart Version:1.0 Function... Basic Default Channel Changed o o Default 3 3 Mode Messages x x Altered ************** x Note Number : True voice ************** Transmitted Recognized Remarks Velocity Note ON o 9nH,v=1-127 o 9nH,v=1-127 Note OFF o 8nH,v=64 o 9nH,v=0 or 8nH After Key's x o Touch Ch's x o Pitch Bend x *2 o 0-24 semi *1 0,32 o o Bank Select 1,5 x *2 o 7,10 o o 11 x *2 o Expression 6,38 x *2 o Data Entry Control 64,66,67 o o Pedal 65 x *2 o Portamento Change x *2 o Sound Controller 84 x *2 o Portamento Control 91,93 o o Effect Depth x *2 o RPN Inc,Dec x *2 o NRPN LSB,MSB x *2 o RPN LSB,MSB Prog o o Change : True # ************** System Exclusive o o : Pos. x x Common : Sel. x x : Tune x x System : Clock o x Real Time: Commands o o :All Sound OFF x o(120,126,127) Aux :Reset All Cntrls x o(121) :Local ON/OFF x o(122) Mes- :All Notes OFF x o( ) sages:active Sense o o :Reset x x Notes: *1 For some Voices (such as Piano or Harpsichord Voices), the pitch may not be changed according to the pitch bend setting range. *2 These Control Change messages cannot be transmitted by panel operations, but can be transmitted by /Rhythm playback data. Mode 1 : OMNI ON, POLY Mode 2 : OMNI ON, MONO o : Yes Mode 3 : OMNI OFF, POLY Mode 4 : OMNI OFF, MONO x : No Manual Development Group 2018 Yamaha Corporation Published 05/2018 POA0 P-125 MIDI Reference 16