H90. Intellivox ADC-H90. Datasheet EN Shaping the future of sound reinforcement. Applies to Part Numbers: , and

Transcription

1 H90 Datasheet Applies to Part Numbers: , an Intellivox ADC-H90 EN Shaping the future of soun reinforcement

2 AXYS ADC-H90 ata sheet rev 2.3 User Notice: No part of this ocument incluing the software escribe in it may be reprouce, transmitte, transcribe, store in a atabase system or translate without the express written permission of Duran Auio BV. Documentation kept by the en-user for backup purposes is exclue from the above mentione. All proucts an corporate names mentione in this ocument may be registere traemarks or copyrights of their respective companies. They are use here for inicative purposes only. The information containe in this ocument has been carefully checke for accuracy, however no guarantee is given with respect to the correctness. Duran Auio BV accepts no responsibility or liability for any errors or inaccuracies that may appear in this ocument or the proucts an/or software escribe in it. Specifications an information containe in this ocument are subject to change at any time without notice /H90_2.3

3 AXYS ADC-H90 ata sheet rev 2.3 Table of Contents User Notice:...2 Table of Contents Architectural an Engineering Specifications Specifications SPL Plots Impeance Plots Mechanical Details Physical References Optional Accessories /H90_2.3 3

4 AXYS ADC-H90 ata sheet rev Architectural an Engineering Specifications The unit shall be constructe as a line-array of six 4 full-range louspeakers, equippe with moisture resistant iaphragms an shall be esigne for use in 100 V/70 V professional auio installations. The unit is intene for use in both public aress an voice alarm systems an shall be compliant with EN The unit shall be suitable for both inoor an outoor use an therefore shall be compliant with the environmental requirements of EN for both types A & B. All necessary array signal processing shall be implemente in the analogue omain by means of a fixe set of internal filters that shall realize appropriate output channel filter transfer functions. Besies the aforementione, the unit shall have the following functions: Switchable High Pass Filter (HPF). Switchable EQ contour. Switchable power taps: 100 W, 50 W an 25 W. The auio signal shall be connecte to a ceramic terminal block. A thermal fuse shall be inclue in the internal auio path to isconnect the unit from the 100 V/ 70V line shoul the unit be expose to extreme heat an/or fire. An aitional internal fuse shall be use to protect the unit from excess current. All connectors, fuses an switches shall be groupe together insie the unit an shall be accessible from a cover plate on the front of the unit. A glan shall be provie for cable entry on the rear of the unit. A LED shall be fitte to the louspeaker baffle which illuminates on etection of a constant high frequency pilot-tone, which shall inicate that the unit is properly connecte to the 100 V/70 V line. The LED shall be visible with the grill installe. The enclosure shall be constructe of steel finishe with an epoxy coating. At the back sie of the enclosure a total of two bracket attachment points shall be provie (locate near the outer ens). The protective front shall consist of a perforate steel grill which can be clicke onto four snap-in stus mounte on the enclosure. For ae security grill security screws shall be provie to lock the steel grill in place. The complete louspeaker unit shall meet the following criteria (100 W tap / HPF flat / EQ flat): Typical frequency range of the complete array: k on reference axis (+/- 3 B), max. SPL at 4 m of 99 BSPL continuous, fixe nominal horizontal opening angle at 4 m of 39 (-6 B, average 1k to 4k ), fixe horizontal aiming angle of 0, fixe vertical opening angle at 4 m of 135 (-6 B, average 1k to 4k ). Dimensions are 134 mm (5.3 ) H x 865 mm (34.1 ) W x 92 mm (3.6 ) D. Weight 10 kg (22 lbs). The louspeaker unit shall be the AXYS moel Intellivox ADC - H /H90_2.3

5 AXYS ADC-H90 ata sheet rev 2.3 Specifications 1 Acoustical: Frequency range 2, 3 Sensitivity (1 W / 4 m) 2, 4 Maximum SPL (100 W / 4 m) 2, 5 Horizontal coverage (-6 B) 6, 8, : 66-1k : 50-2k : 39-4k : 27-8k : 15 Vertical coverage (-6 B) 7, 8, : 211-1k : 198-2k : 128-4k : 88-8k : 38 Steering angle : Horizontal 0 Typical throw : 15 m : k (+/-3 B, HPF flat / EQ flat) : k (-10 B, HPF flat / EQ flat) : 79 BSPL (100 W tap / HPF flat / EQ flat) : 76 BSPL (100 W tap / HPF active / EQ active) : 99 BSPL (100 W tap / HPF flat / EQ flat) : 96 BSPL (100 W tap / HPF active / EQ active) Electrical: Rate Impeance 10, W tap : 100 Ω - 50 W tap : 200 Ω - 25 W tap : 400 Ω Rate Noise Power 10 : 100 Wrms (100 W tap) Rate Noise Voltage 10 : 100 Vrms Control switches 12 - Tap setting : 100 W / 50 W / 25 W - Highpass filter 13 : HPF active / Flat - Correction EQ : EQ active / Flat Fuses - Glass fuse 12 : 1 A (slow type, 20 mm, replaceable) - Thermal fuse 12 : Open temperature 104 C Rating >= VAC One-shot operation (replaceable) Connections - Terminal block 12 : 100 V / 0 V / Earth (connecte to enclosure housing) - Material : Steatite housing with brass inserts - Rate cross-section : 2.5 mm 2 Cable glan - Maximum iameter : 13.5 mm /H90_2.3 5

6 AXYS ADC-H90 ata sheet rev 2.3 Pilot tone etection - Inicator : Green LED on front - Frequency range : 20k - 23k - Minimum level 14 : 6 Vrms Suggeste amplifiers : AXYS 100 V InustryAmp series General: Temperature range (ambient) 15 : -25 to 70 C Transucers : 6 x 4 full range Dimensions (H x W x D) 16 : 134 mm (5.3 ) x 865 mm (34.1 ) x 92 mm (3.6 ) Default colour - Enclosure an grill : RAL 9007 (grey), applies to part number : RAL 9010 (white), applies to part number : Custom colour, applies to part number Speaker baffle : RAL 9011 (black), applies to all part numbers Weight : 10 kg (22 lbs) Enclosure material - Enclosure : Steel, power coate - Grill : Perforate steel mesh Stanars (incl. environmental tests an enclosure protection) : EN Type B (outoor) 17 Certificates : CE, EN Notes: 1. The factory efault setting (100 W tap / HPF active / EQ active) is assume unless specifie otherwise. 2. Measure at 4 m from the reference point on the reference axis accoring to EN 54-24:2008 (correcte groun plane measurement setup). See Physical References section for etails. 3. See SPL Plots section for etails. 4. Measure with a broa-ban pink noise signal, calculate from soun pressure levels analyse in 1/3 octave bans with center frequencies from k. 5. Measure with simulate programme signal accoring to IEC :1985, 100 Vrms with a crest factor of 6 B. 6. Measure in the horizontal plane at 4 m from the reference point accoring to EN 54-24:2008 (correcte groun plane measurement setup). See Physical References section for etails. 7. Measure in the vertical plane at 4 m from the reference point accoring to EN 54-24:2008 (correcte groun plane measurement setup). See Physical References section for etails. 8. Measure with a broa-ban pink noise signal analyse in octave bans. 9. Directivity is generally istance epenent, the DDA software package shoul be use for etaile irectivity analysis. 10. Define accoring to EN 54-24: See Impeance Plots section for etails. 12. Locate behin the inspection plate. Refer to the relate Installation Manual for etails. 13. Series capacitor in primary circuit. 14. The etection is most sensitive aroun 21k, the specifie level is require near the frequency extremes. The require level is not epening on the (tap) switch settings. 15. Maximum ambient temperature for continuous operation is 40 C. For ambient temperature below 0 C a Frost protection scheme (as offere by the AXYS InustryAmp amplifiers) is avise. 16. Depth of enclosure incluing front grill, without mounting brackets. 17. Also compliant to the requirements of Type A (inoor) /H90_2.3

7 AXYS ADC-H90 ata sheet rev SPL Plots B S P L B S P L k 2k 5k 10k 20k Fig 1 Normalize SPL vs frequency, 100 W tap / HPF flat / EQ flat k 2k 5k 10k 20k Fig 2 Normalize SPL vs frequency, 100 W tap / HPF flat / EQ active B S P L B S P L k 2k 5k 10k 20k Fig 3 Normalize SPL vs frequency, 100 W tap / HPF active / EQ flat k 2k 5k 10k 20k Fig 4 Normalize SPL vs frequency, 100 W tap / HPF active / EQ active B B k 2k 5k 10k 20k k 2k 5k 10k 20k Fig 5 EQ correction. Fig 6 HPF correction (100 W tap). Note: SPL ata obtaine from correcte groun plane measurements, MLS metho, 8 ms time winow, 1/3 oct average. SPL plots scale to 0 BSPL at 1k /H90_2.3 7

8 AXYS ADC-H90 ata sheet rev Impeance Plots O h m 1k.9k k 2k 5k 10k 20k 40k Fig 7 Impeance magnitue (re) an phase (green) vs frequency, 100 W tap / HPF flat / EQ flat e g O h m 1k.9k k 2k 5k 10k 20k 40k Fig 8 Impeance magnitue (re) an phase (green) vs frequency, 100 W tap / HPF flat / EQ active e g 2k k k k k k k k O h m 1.2k 1k e g O h m 1.2k 1k e g k 2k 5k 10k 20k 40k Fig 9 Impeance magnitue (re) an phase (green) vs frequency, 50 W tap / HPF flat / EQ flat k 2k 5k 10k 20k 40k Fig 10 Impeance magnitue (re) an phase (green) vs frequency, 50 W tap / HPF flat / EQ active k k k k k 3.25k 3k 2.75k 2.5k k 3.25k 3k 2.75k 2.5k O h m 2.25k 2k 1.75k e g O h m 2.25k 2k 1.75k e g 1.5k 1.25k 1k k 1.25k 1k k 2k 5k 10k 20k 40k Fig 11 Impeance magnitue (re) an phase (green) vs frequency, 25 W tap / HPF flat / EQ flat k 2k 5k 10k 20k 40k Fig 12 Impeance magnitue (re) an phase (green) vs frequency, 25 W tap / HPF flat / EQ active /H90_2.3

9 78, AXYS ADC-H90 ata sheet rev Mechanical Details Reference point for acoustical mounting height 92,5 118,6 432,5 432, , , /H90_2.3 9

10 AXYS ADC-H90 ata sheet rev Physical References Key 6 1 louspeaker enclosure 2 louspeaker front 3 reference axis 4 reference plane 5 reference point 6 horizontal plane 7 vertical plane Notes: 1. The reference plane (4) intersects the enclosure through the louspeaker front baffle (2). 2. The reference point (5), locate in the reference plane (4), coincies with the center of the louspeaker front baffle (2). 3. The reference axis (3), through the reference point (5), is perpenicular to the louspeaker front baffle (2). 4. The horizontal plane (6) an the vertical plane (7) contain the reference axis (3) /H90_2.3

11 AXYS ADC-H90 ata sheet rev Optional Accessories Wall Bracket Set (25 mm) (Supplie as stanar) Orer coe: (2 pcs incl. fasteners) Stanar colour RAL 9007 (grey) Hinge Bracket 90 Orer coe: (1 pcs per pack) Stanar colour RAL 9007 (grey) Swivel Bracket 90 Orer coe: (1 pcs per pack) Stanar colour RAL 9007 (grey) Swivel Bracket 45 Orer coe: (1 pcs per pack) Stanar colour RAL 9007 (grey) Wall Bracket Set (25 mm) Orer coe: (2 pcs incl. fasteners) Colour RAL 9010 (white) Wall Bracket Set (35 mm) Orer coe: (2 pcs incl. fasteners) Colour RAL 9010 (white) Wall Bracket Set (60 mm) Orer coe: (2 pcs incl. fasteners) Colour RAL 9010 (white) Hinge Bracket 90 Orer coe: (1 pcs per pack) Colour RAL 9010 (white) Swivel Bracket 90 Orer coe: (1 pcs per pack) Colour RAL 9010 (white) Swivel Bracket 45 Orer coe: (1 pcs per pack) Colour RAL 9010 (white) Small Hinge Set Orer coe: (2 pcs pack) Note: The provie locking mechanism of the hinges an swivel brackets is not suitable for the stanar (horizontal) mounting metho /H90_2.3 11

12 DURAN AUDIO BV Koxkampseweg 10, 5301 KK Zaltbommel, The Netherlans. tel fax