ECOFLEX 10 Characteristics Diameter 10,2 mm. ECOFLEX 15 Characteristics Diameter 14,6 mm. AIRCOM PLUS Characteristics Diameter 10,3 mm

Size: px

Start display at page:

Download "ECOFLEX 10 Characteristics Diameter 10,2 mm. ECOFLEX 15 Characteristics Diameter 14,6 mm. AIRCOM PLUS Characteristics Diameter 10,3 mm"

Kristina Nicholson
6 years ago
Views:

AIRCOM PLUS Characteristics Diameter 10,3 mm Attenuation @ 1 GHz/100m 13,4 db Attenuation @ 1 GHz/100ft 4,08 db 10 GHz ECOFLEX 10 Characteristics Diameter 10,2 mm Attenuation @ 1 GHz/100m 14,2 db

1 AIRCOM PLUS Characteristics Diameter 10,3 mm 1 GHz/100m 13,4 db 1 GHz/100ft 4,08 db 10 GHz ECOFLEX 10 Characteristics Diameter 10,2 mm 1 GHz/100m 14,2 db 1 GHz/100ft 4,33 db AIRCELL 7 Characteristics Diameter 7,3 mm 1 GHz/100m 21,52 db 1 GHz/100ft 4,08 db ECOFLEX 15 Characteristics Diameter 14,6 mm 1 GHz/100m 9,8 db 1 GHz/100ft 2,99 db

2 Cut your losses...

...with low loss coaxial cables Over the past several years, there has been an increased demand for low loss coaxial cables due to the intensive utilization of frequency spectrum well up into the

AIRCOM PLUS with its unique air cell dielectric has become one of the most popular multi-purpose coaxial cables since its introduction in 1989.

3 ...with low loss coaxial cables Over the past several years, there has been an increased demand for low loss coaxial cables due to the intensive utilization of frequency spectrum well up into the microwave regions. All the cables that are presented in this brochure meet these requirements at a very competitive price. AIRCOM PLUS with its unique air cell dielectric has become one of the most popular multi-purpose coaxial cables since its introduction in A specially designed honeycomb expander maintains the correct position of the center conductor while keeping the cable impedance constant even when it s sharply bent. This high quality, semi-air spaced cable can be used for applications up into the 10 GHz microwave region. Throughout its useable frequency range AIRCOM PLUS achieves a remarkable low loss despite its small diameter of 10.3 mm (0.4 inches) AIRCELL 7 is an extremely flexible coaxial cable with a surprisingly low loss even though its diameter is just 7.3mm (approx inch). Because of its 19 strand copper center conductor, a bending radius as small as 25 mm (approx. 1 inch) is allowed. This makes AIRCELL 7 ideal for small to intermediate distances or where limited space does not allow the use of larger diameter cables. The ECOFLEX family of coaxial cables is the number 1 choice when it comes to flexibility, low loss and ease of use. IP 68 compliant solderless N-connectors are available, thus allowing the manufacture of cable assemblies in minutes. ECOFLEX cables are the European wide industrial standard for general communications use. They are also ideally suited for use in the 2.4 GHz and 5 GHz WLAN bands. Precise coaxial connectors are an absolute necessity for long lasting trouble free connections! For all the cables presented in this brochure, the most common types of coaxial connectors are available. These specially designed connectors feature: extended housings oversized gaskets for better sealing and above average strain relief no special tooling requirements. Easy to read assembly instructions can be downloaded from the internet. For long lasting high-quality connections, we strongly recommend using the genuine AIRCELL 7, AIRCOM PLUS und ECOFLEX coaxial connectors.

Low loss coaxial cable for radio communications Characteristics Diameter 10,3 mm Attenuation @ 1 GHz/100m 13,4 db Attenuation @ 1 GHz/100ft 4,08 db 10 GHz AIRCOM PLUS Connectors Art.-Nr.

Its low-loss characteristics makes it very suitable for applications up into the microwave range.

4 Low loss coaxial cable for radio communications Characteristics Diameter 10,3 mm 1 GHz/100m 13,4 db 1 GHz/100ft 4,08 db 10 GHz AIRCOM PLUS Connectors Art.-Nr N-plug, male AIRCOM PLUS is a semi air spaced coaxial cable with excellent electric and mechanical properties. Its low-loss characteristics makes it very suitable for applications up into the microwave range. AIRCOM PLUS features a unique PE-honeycomb expander which retains the correct impedance even when sharply bent. The expander provides a tight seal around the solid center conductor which is made from oxygen free copper, thus ensuring it is protected against moisture and corrosion. Another feature of AIRCOM PLUS is its double shielding which is constructed of overlapping copperfoil plus an additional tightly woven copperbraid resulting in a screening efficiency > 85 db@1 GHz. The copperfoil has an applied PE-coating which prevents foil cracking due to short radius bends and the black PVCsheath of AIRCOM PLUS is UV-stabilized. AIRCOM PLUS is the 1st choice when a low-loss microwave rated cable is required. It s economical price makes it the clear leader for today s demanding applications. AIRCOM PLUS is available from stock in the following standard drum sizes: 25m, 50m, 100m, 200m and 500m. Art.-Nr Art.-Nr Art.-Nr Art.-Nr Art.-Nr Art.-Nr N-right angle connector N-plug, female BNC-plug, male TNC-plug, male TNC-RP-plug, male (reverse polarity) UHF-plug, male

Technical data Construction Centre conductor bare copper, oxygen free 1 x 2,7 mm Centre conductor Ø 2,7 mm Dielectric semi airspaced PE Dielectric Ø 7,2 mm Outer conductor 1 copperfoil, PE coated

5 Technical data Construction Centre conductor bare copper, oxygen free 1 x 2,7 mm Centre conductor Ø 2,7 mm Dielectric semi airspaced PE Dielectric Ø 7,2 mm Outer conductor 1 copperfoil, PE coated Shielding factor 100% Outer conductor 2 copper braid, 75% Sheath black PVC, uv-resistant Outer diameter Ø 10,3 mm AIRCOM PLUS is a registered trademark of SSB-Electronic GmbH. For your information AIRCOM PLUS RG 213/U RG 58/U Capacity pf/m Velocity factor 0,83 0,66 0,66 attenuation db/100 m 10 MHz 1,2 2,0 5,0 100 MHz 3,8 7,0 17,0 500 MHz 9,0 17,0 39, MHz 13,4 22,5 54, MHz 25,9 58,5 118 Mechanical specifications Weight (100 m) 15 kg Min. bending radius 55 mm Temperature range C Pulling strength 5 dan Electrical specifications Capacity 81 pf/m Velocity factor 0,83 f max 10 GHz Screening 1 GHz > 85 db DC-resistance Centre conductor 3,1 Ohm/km Outer conductor 6,4 Ohm/km RF peak voltage 1 kv Max. power handling C) 10 MHz MHz MHz MHz MHz MHz MHz 110 Typ. attenuation (db/100m@20 C) C 5 MHz 0,9 0,27 10 MHz 1,2 0,37 50 MHz 2,6 0, MHz 3,8 1, MHz 4,6 1, MHz 5,5 1, MHz 6,8 2, MHz 8,4 2, MHz 9,0 2, MHz 11,8 3, MHz 13,4 4, MHz 15,6 4, MHz 17,0 5, MHz 18,9 5, MHz 20,1 6, MHz 22,5 6, MHz 25,9 7, MHz 31,1 9, MHz 35,9 10, MHz 40,6 12, MHz 58,3 17,77 Attenuation (db/ C 100 db 10 db 1dB 0,1 db Frequency (MHz) Return loss 0 db -5 db -10 db -15 db -20 db -25 db -30 db -35 db -40 db 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 6,5 7,0 7,5 8,0 8,5 9,0 9,5 10,0 Accessories Grounding clamp Art.-Nr Frequency (GHz) Due to production tolerances the RTL may have different characteristics

Low loss coaxial cable for radio communications Characteristics Diameter 7,3 mm Attenuation @ 1 GHz/100m 21,52 db Attenuation @ 1 GHz/100ft 4,08 db AIRCELL 7 Connectors AIRCELL 7 is a super flexible

The low attenuation of AIRCELL 7 is achieved through advanced manufacturing techniques and the use of a PE-LLC dielectric with a foaming rate of more than 70%.

6 Low loss coaxial cable for radio communications Characteristics Diameter 7,3 mm 1 GHz/100m 21,52 db 1 GHz/100ft 4,08 db AIRCELL 7 Connectors AIRCELL 7 is a super flexible coaxial cable designed for frequencies up to. At a diameter of just 7,3 mm ( (0.287 OD) and a minimum bending radius of just 25 mm, it offers relatively low loss. The low attenuation of AIRCELL 7 is achieved through advanced manufacturing techniques and the use of a PE-LLC dielectric with a foaming rate of more than 70%. The extreme flexibility of AIRCELL 7 is further enhanced through the use of a multi-stranded oxygen-free center conductor. Further advantages of this cable include the use of double shielding which is constructed of overlapping copperfoil plus an additional tightly woven copperbraid. The copperfoil has an applied PE-coating which prevents foil cracking due to short radius bends and the black PVC-sheath of AIRCELL 7 is uv-stabilized. A screening efficiency of > 85 db@1ghz is realized. AIRCELL 7 is the right choice, when a super flexible, microwave rated cable is required. Its economical price makes it the clear leader for today s demanding application. AIRCELL 7 is available from stock in the following standard drum sizes: 25m, 50m, 100m, 200m and 500m Art.-Nr Art.-Nr Art.-Nr Art.-Nr Art.-Nr Art.-Nr N-plug, male N-right angle connector N-plug, female BNC-plug, male TNC-plug, male UHF-plug, male standard Art.-Nr UHF-plug, male prof.

Technical data Construction Centre conductor stranded copper, oxygen free 19 x 0,37 mm Centre conductor Ø 1,85 mm Dielectric PE low loss compound Dielectric Ø 5,0 mm Outer conductor 1 copperfoil, PE

7 Technical data Construction Centre conductor stranded copper, oxygen free 19 x 0,37 mm Centre conductor Ø 1,85 mm Dielectric PE low loss compound Dielectric Ø 5,0 mm Outer conductor 1 copperfoil, PE coated Shielding factor 100% Outer conductor 2 copper braid, 70% Sheath black PVC, uv-resistant Outer diameter Ø 7,3 mm AIRCELL is a registered trademark of SSB-Electronic GmbH. For your information AIRCELL 7 RG 213/U RG 58/U Capacity pf/m Velocity factor 0,83 0,66 0,66 attenuation db/100 m 10 MHz 2,2 2,0 5,0 100 MHz 6,28 7,0 17,0 500 MHz 14,72 17,0 39, MHz 21,52 22,5 54, MHz 40,88 58,5 118 Mechanical specifications Weight (100 m) 7,2 kg Min. bending radius 25 mm Temperature range C Pulling strength 2 dan Electrical specifications Capacity 75 pf/m Velocity factor 0,83 f max Screening 1 GHz > 83 db DC-resistance Centre conductor 3,1 Ohm/km Outer conductor 6,4 Ohm/km RF peak voltage 1 kv Attenuation (db/ C 100 db 10 db 1dB 0,1 db Frequency (MHz) Max. power handling C) 10 MHz MHz MHz MHz MHz MHz 90 Typ. attenuation (db/100m@20 C) C 5 MHz 1,6 0,49 10 MHz 2,2 0,67 50 MHz 4,52 1, MHz 6,28 1, MHz 7,6 2, MHz 9,04 2, MHz 11,2 3, MHz 13,6 4, MHz 14,72 4, MHz 19,0 5, MHz 21,52 6, MHz 24,84 7, MHz 27,08 8, MHz 30,0 9, MHz 31,88 9, MHz 35,6 10, MHz 40,88 12, MHz 49,12 14, MHz 57,04 17, MHz 64,9 19,79 Return loss 0 db -5 db -10 db -15 db -20 db -25 db -30 db -35 db -40 db 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 Frequency (GHz) Due to production tolerances the RTL may have different characteristics

Low loss coaxial cable for radio communications Characteristics Diameter 10,2 mm Attenuation @ 1 GHz/100m 14,2 db Attenuation @ 1 GHz/100ft 4,33 db ECOFLEX 10 Connectors Art.-Nr.

Advanced manufacturing techniques combined with the use of a low-loss PE-LLC Dielectric yields a foaming rate of more than 70%. This results in very low attenuation.

Use of proprietary techniques, continuous center conductor calibration and compression as well as the application of a precoating results in low losses and good impedance matching.

8 Low loss coaxial cable for radio communications Characteristics Diameter 10,2 mm 1 GHz/100m 14,2 db 1 GHz/100ft 4,33 db ECOFLEX 10 Connectors Art.-Nr N-plug, male ECOFLEX 10 is a flexible, low-loss coaxial cable specifically designed for use up to. Advanced manufacturing techniques combined with the use of a low-loss PE-LLC Dielectric yields a foaming rate of more than 70%. This results in very low attenuation. ECOFLEX 10 sets a new standard among flexible coaxial cables. The flexibility of ECOFLEX 10 is further enhanced through the use of a stranded, oxygen-free copper center conductor. Use of proprietary techniques, continuous center conductor calibration and compression as well as the application of a precoating results in low losses and good impedance matching. Further advantages of the cable include the use of double shielding which is constructed of overlapping copperfoil plus an additional tight woven copper braid. A screening efficiency of > 90 db@ 1 GHz is realized. The copperfoil has an applied PE-coating which prevents foil cracking due to short radius bends. The black PVC sheath of ECOFLEX 10 is uv-stabilized. In addition to a full compliment of standard connectors, an easy to use solder free N-connector has been specially developed for ECOFLEX 10. Connector installation only takes a few minutes and requires no special tools. ECOFLEX 10 is the right choice when a low loss, highly flexible microwave rated cable is required. It s economical price makes it the clear leader for today s demanding applications. ECOFLEX 10 is available from stock in the following standard drum sizes: 25m, 50m, 100m, 200m and 500m. Art.-Nr Art.-Nr Art.-Nr Art.-Nr Art.-Nr Art.-Nr Art.-Nr N-plug, male, solderless N-right angle connector N-plug, female BNC-plug, male TNC-Stecker TNC-RP-plug, male (reverse polarity) UHF-plug, male

Technical data Construction Centre conductor stranded copper, oxygen free 7 x 1,0 mm Centre conductor Ø 2,85 mm Dielectric low loss compound PE Dielectric Ø 7,25 mm Outer conductor 1 copperfoil, PE

bending radius 40 mm Temperature range - 40.

8,4 Ohm/km RF peak voltage 1 kv Max. power handling (W @40 C) 10 MHz 3960 100 MHz 1210 500 MHz 510 1000 MHz 350 2000 MHz 230 3000 MHz 180 4000 MHz 150 5000 MHz 130 6000 MHz 120 Typ.

9 Technical data Construction Centre conductor stranded copper, oxygen free 7 x 1,0 mm Centre conductor Ø 2,85 mm Dielectric low loss compound PE Dielectric Ø 7,25 mm Outer conductor 1 copperfoil, PE coated Shielding factor 100% Outer conductor 2 copper braid, 72% Sheath black PVC, uv-resistant Outer diameter Ø 10,2 mm Mechanical specifications Weight (100 m) 13,1 kg Min. bending radius 40 mm Temperature range C Pulling strength 5 dan Electrical specifications Capacity 78 pf/m Velocity factor 0,85 f max Screening 1 GHz > 90 db DC-resistance Centre conductor 3,3 Ohm/km Outer conductor 8,4 Ohm/km RF peak voltage 1 kv Max. power handling C) 10 MHz MHz MHz MHz MHz MHz MHz MHz MHz 120 Typ. attenuation (db/100m@20 C) C 5 MHz 0,8 0,24 10 MHz 1,2 0,37 50 MHz 2,8 0, MHz 4,0 1, MHz 4,9 1, MHz 5,8 1, MHz 7,3 2, MHz 8,9 2, MHz 9,6 2, MHz 12,5 3, MHz 14,2 4, MHz 16,5 5, MHz 17,9 5, MHz 19,9 6, MHz 21,2 6, MHz 23,6 7, MHz 27,0 8, MHz 32,2 9, MHz 37,0 11, MHz 41,5 12,65 ECOFLEX is a registered trademark of SSB-Electronic GmbH. For your information Attenuation (db/ C 100 db 10 db 1dB 0,1 db Frequency (MHz) Return loss 0 db -5 db -10 db -15 db -20 db -25 db -30 db -35 db -40 db 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 Accessories Grounding clamp Art.-Nr ECOFLEX 10 RG 213/U RG 58/U Capacity pf/m Velocity factor 0,85 0,66 0,66 attenuation db/100 m 10 MHz 1,2 2,0 5,0 100 MHz 4,0 7,0 17,0 500 MHz 9,6 17,0 39, MHz 14,2 22,5 54, MHz 27,0 58,5 118 Frequency (GHz) Due to production tolerances the RTL may have different characteristics

Low loss coaxial cable for radio communications Characteristics Diameter 14,6 mm Attenuation @ 1 GHz/100m 9,8 db Attenuation @ 1 GHz/100ft 2,99 db ECOFLEX 15 is a flexible low-loss coaxial cable for

10 Low loss coaxial cable for radio communications Characteristics Diameter 14,6 mm 1 GHz/100m 9,8 db 1 GHz/100ft 2,99 db ECOFLEX 15 is a flexible low-loss coaxial cable for use in the frequency range of DC -. Its unique construction combines the low loss properties found in non-flexible solid center conductor hardline cables with the high flexibility of cables manufactured with stranded center conductors. Solder-free, high quality connectors in N and 7-16 have been specially developed for ECOFLEX 15. Connector installation only takes a few minutes and requires no special tools. ECOFLEX 15 is available from stock in the following standard drum sizes: 25m, 50m, 100m, 200m and 500m. Advanced manufacturing techniques combined with the use of a PE-LLC Dielectric yields a foaming rate of more than 70%, resulting in very low attenuation. The use of continuous center conductor calibration and compression as well as the application of a precoating guarantees low losses and stable impedance matching. ECOFLEX 15 Connectors An EMI screening immunity of > 90 db at 1.0 GHz is achieved through the use of double shielding which consists of overlapping copper foil and an additional tight woven copperbraid. The copperfoil has an applied PE coating which prevents foil cracking due to short radius bends. The black PVC sheath of ECOFLEX 15 is uv-stabilized. ECOFLEX 15 is the 1st choice when a low loss, highly flexible microwave rated cable is required. It s economical price makes ECOFLEX 15 the clear leader for today s demanding applications. Art.-Nr Art.-Nr N-plug, male, solderless N-plug, female, solderless Art.-Nr /16 DIN-plug male, solderless

Technical data Construction Centre conductor stranded copper, oxygen free 7 x 1,55 mm Centre conductor Ø 4,5 mm Dielectric low loss compound PE Dielectric Ø 11,3 mm Outer conductor 1 copperfoil, PE

bending radius 70 mm Temperature range - 40.

5,15 Ohm/km RF peak voltage 1,55 kv Max. power handling (W @40 C) 10 MHz 6450 100 MHz 1970 500 MHz 830 1000 MHz 560 2000 MHz 380 3000 MHz 300 4000 MHz 250 6000 MHz 190 Typ.

11 Technical data Construction Centre conductor stranded copper, oxygen free 7 x 1,55 mm Centre conductor Ø 4,5 mm Dielectric low loss compound PE Dielectric Ø 11,3 mm Outer conductor 1 copperfoil, PE coated Shielding factor 100% Outer conductor 2 copper braid, 72% Sheath black PVC, uv-resistant Outer diameter Ø 14,6 mm Mechanical specifications Weight (100 m) 25,8 kg Min. bending radius 70 mm Temperature range C Pulling strength 12 dan Electrical specifications Capacity 77 pf/m Velocity factor 0,86 f max Screening 1 GHz > 90 db DC-resistance Centre conductor 1,56 Ohm/km Outer conductor 5,15 Ohm/km RF peak voltage 1,55 kv Max. power handling C) 10 MHz MHz MHz MHz MHz MHz MHz MHz 190 Typ. attenuation (db/100m@20 C) C 5 MHz 0,6 0,18 10 MHz 0,86 0,26 50 MHz 1,96 0, MHz 2,81 0, MHz 3,4 1, MHz 4,05 1, MHz 5,0 1, MHz 6,1 1, MHz 6,7 2, MHz 8,6 2, MHz 9,8 2, MHz 11,4 3, MHz 12,4 3, MHz 13,8 4, MHz 14,7 4, MHz 16,3 4, MHz 18,7 5, MHz 22,3 6, MHz 25,7 7, MHz 28,8 8,78 ECOFLEX is a registered trademark of SSB-Electronic GmbH. For your informationation ECOFLEX 15 RG 213/U RG 58/U Capacity pf/m Velocity factor 0,86 0,66 0,66 attenuation db/100 m 10 MHz 0,86 2,0 5,0 100 MHz 2,81 7,0 17,0 500 MHz 6,7 17,0 39, MHz 9,8 22,5 54, MHz 18,7 58,5 118 Attenuation (db/ C 100 db 10 db 1dB 0,1 db Frequency (MHz) Return loss 0 db -5 db -10 db -15 db -20 db -25 db -30 db -35 db -40 db 0,0 0,5 1,0 1,5 2,0 2,5 3,0 3,5 4,0 4,5 5,0 5,5 6,0 Accessories Grounding clamp Art.-Nr Frequency (GHz) Due to production tolerances the RTL may have different characteristics

12 AIRCOM, AIRCELL, ECOFLEX are registered trademark of SSB-Electronic GmbH.

You need the best connection!

You need the best connection! Passion Passion in high in high frequency Passion Passion in high in high frequency Coaxial, connectors adaptors for radio communications Your dealer SSB-Electronic GmbH Ostenfeldmark 59557 Lippstadt/Germany