AUTOMOTIVE RELAY WITH ISO TERMINAL ARRANGEMENT
|
|
- Antony Skinner
- 6 years ago
- Views:
Transcription
1 AUTOMOTIVE RELAY WITH ISO TERMINAL ARRANGEMENT CB RELAYS Compliance with RoHS Directive FEATURES 1. This relay has an ISO (International Organization for Standardization) terminal arrangement. Terminals are all solder plated. *3 A type: Terminal is the plug-in type (no plating).. Relay is compact and high capacity ( A). Compact form factor realized with space saving mm. 1. inch small base area thanks to integrated bobbin and base construction. Features high switching capacity of A 3. Features high thermal resistance of 1 C 7 F (heat resistant type). Heat resistant type is available that can withstand use near engines. ( A switching capacity). Sealed type available for resisting adverse environments.. Surge absorbing built-in diode type that works when the relay coil is off and an internal resistor type are available. (Please inquire.). Protective element type is also available. 7. For only plug-in types, types with nominal switching capacities of 3 A (1 V) and 1 A ( V) are available. TYPICAL APPLICATIONS 1. Automobiles Headlights, Cell motors, Air conditioners, ABS, EPS, etc.. Construction equipment 3. Agricultural equipment, Conveyor, etc. ORDERING INFORMATION Contact arrangement 1a: 1 Form A 1: 1 Form C Protective construction Nil: Sealed type F: Flux-resistant type Heat resistant of types Nil: Standard type T: Heat resistant type CB Contact rating Nil: Standard type H: High contact capacity type V: 3 A type Protective element Nil: None D: with diode inside R: with resistor inside Mounting classification Nil: Plug-in type P: PC board type M: Bracket type Coil voltage (DC) 1V, V
2 TYPES 1. Standard type Contact arrangement Mounting classification Nominal coil voltage 1 Form A 1 Form C High contact capacity PC board type Plug-in type Bracket type PC board type Plug-in type Bracket type PC board type* Plug-in type Bracket type Sealed type Part No. Flux-resistant type Part No. 1V DC CB1a-P-1V CB1aF-P-1V V DC CB1a-P-V CB1aF-P-V 1V DC CB1a-1V CB1aF-1V V DC CB1a-V CB1aF-V 1V DC CB1a-M-1V CB1aF-M-1V V DC CB1a-M-V CB1aF-M-V 1V DC CB1-P-1V CB1F-P-1V V DC CB1-P-V CB1F-P-V 1V DC CB1-1V CB1F-1V V DC CB1-V CB1F-V 1V DC CB1-M-1V CB1F-M-1V V DC CB1-M-V CB1F-M-V 1V DC CB1aH-P-1V CB1aHF-P-1V V DC CB1aH-P-V CB1aHF-P-V 1V DC CB1aH-1V CB1aHF-1V V DC CB1aH-V CB1aHF-V 1V DC CB1aH-M-1V CB1aHF-M-1V V DC CB1aH-M-V CB1aHF-M-V Packing quantity; Carton: pcs. Case: pcs. Notes: 1. Please use CB R to order built-in resistor type and CB D to order built-in diode type. (Asterisks should be filled in from parts table.). *Regarding solder, this product is not MIL (Military Standard) compliant. Please evaluate solder mounting by the actual equipment before using. CB. Heat resistant type Contact arrangement Mounting classification Nominal coil voltage Sealed type Flux-resistant type Part No. Part No. PC board type 1V DC CB1a-T-P-1V CB1aF-T-P-1V V DC CB1a-T-P-V CB1aF-T-P-V 1 Form A Plug-in type 1V DC CB1a-T-1V CB1aF-T-1V V DC CB1a-T-V CB1aF-T-V Bracket type 1V DC CB1a-T-M-1V CB1aF-T-M-1V V DC CB1a-T-M-V CB1aF-T-M-V PC board type 1V DC CB1-T-P-1V CB1F-T-P-1V V DC CB1-T-P-V CB1F-T-P-V 1 Form C Plug-in type 1V DC CB1-T-1V CB1F-T-1V V DC CB1-T-V CB1F-T-V Bracket type 1V DC CB1-T-M-1V CB1F-T-M-1V V DC CB1-T-M-V CB1F-T-M-V PC board type* 1V DC CB1aH-T-P-1V CB1aHF-T-P-1V V DC CB1aH-T-P-V CB1aHF-T-P-V High contact capacity 1V DC CB1aH-T-1V CB1aHF-T-1V Plug-in type V DC CB1aH-T-V CB1aHF-T-V Bracket type 1V DC CB1aH-T-M-1V CB1aHF-T-M-1V V DC CB1aH-T-M-V CB1aHF-T-M-V Packing quantity; Carton: pcs. Case: pcs. Notes: 1. Please use CB R to order built-in resistor type and CB D to order built-in diode type. (Asterisks should be filled in from parts table.). *Regarding solder, this product is not MIL (Military Standard) compliant. Please evaluate solder mounting by the actual equipment before using A type (*Terminals are all of the plug-in type.) Contact arrangement Nominal coil voltage Sealed type Flux-resistant type Part No. Part No. 1 Form A 1V DC CB1aV-1V CB1aVF-1V V DC CB1aV-V CB1aVF-V 1 Form C 1V DC CB1V-1V CB1VF-1V V DC CB1V-V CB1VF-V 1 Form A with resistor inside 1V DC CB1aV-R-1V CB1aVF-R-1V V DC CB1aV-R-V CB1aVF-R-V 1 Form C with resistor inside 1V DC CB1V-R-1V CB1VF-R-1V V DC CB1V-R-V CB1VF-R-V 1 Form A with diode inside 1V DC CB1aV-D-1V CB1aVF-D-1V V DC CB1aV-D-V CB1aVF-D-V 1 Form C with diode inside 1V DC CB1V-D-1V CB1VF-D-1V V DC CB1V-D-V CB1VF-D-V Packing quantity; Carton: pcs. Case: pcs.
3 RATING 1. Coil data 1) 1. No protective element and with diode inside Contact arrangement Nominal coil voltage (Initial, at C F) (Initial, at C F) Nominal operating current (at C F) Coil resistance (±%) (at C F) Nominal operating power (at C F) Usable voltage range 1 Form A, 1V DC 3 to 7V DC 1. to.v DC 117mA 3Ω 1.W to 1V DC 1 Form C V DC to 1V DC. to V DC 7mA 3Ω 1.W to 3V DC 117mA 3Ω 1.W (PC board type) High contact 1V DC 3 to 7V DC 1. to.v DC to 1V DC 1mA Ω 1.W capacity ma 11Ω 1.W (PC board type) V DC to 1V DC. to V DC to 3V DC 7mA 3Ω 1.W Note: Other pick-up voltage types are also available. Please contact us for details. ) With resistor inside Contact arrangement 1 Form A, 1 Form C Nominal coil voltage (Initial, at C F) (Initial, at C F) Nominal operating current (at C F) Combined resistance (±%) (at C F). Specifications 1) Standard type (1 V coil voltage) Characteristics Item Specifications Contact Rating Electrical characteristics Mechanical characteristics Expected life Conditions Nominal operating power (at C F) Usable voltage range 1V DC 3 to 7V DC 1. to.v DC 13mA 9.Ω 1.W to 1V DC V DC to 1V DC. to V DC ma.ω.w to 3V DC Arrangement 1 Form A 1 Form C Contact resistance (Initial) TypmΩ (By voltage drop V DC 1 A) Contact material Ag alloy (Cadmium free) Nominal switching capacity (Initial) A 1V DC N.O.: A 1V DC N.C.: A 1V DC High contact capacity 7A 1V DC (at C F) A 1V DC (at C 1 F) carrying current (Initial) (1V DC, at C 1 F, continuous) N.O.: A N.O.: A, N.C.: A N.O.: A Nominal operating power 1.W 1.W 1.W (1.W: PC board type) switching capacity* 1 1A 1V DC (1V DC), 1A V DC (V DC) Initial insulation resistance MΩ (at V DC) Initial breakdown Between open contacts Vrms for 1 min. (Detection current: ma) voltage Between contacts and coil Vrms for 1 min. (Detection current: ma) Operate time (at nominal voltage) (at C F) 1ms (at C F, excluding contact bounce time) (Initial) Release time (at nominal voltage) (at C F) 1ms (at C F, excluding contact bounce time, without diode) (Initial) Shock resistance Functional m/s {G} Destructive 1, m/s {G} Vibration Functional Hz to Hz,.1m/s {.G} resistance Destructive Hz to, Hz,.1m/s {.G} Time of vibration for each direction;. Y. Z direction: hours Electrical (at nominal switching capacity) Flux-resistant type:, Sealed type: (Operating frequency: s ON, s OFF) Mechanical (at 1 cpm) Conditions for operation, transport and storage* Standard type; Ambient temp: to + C to +1 F, Humidity: to % R.H. (Not freezing and condensing at low temperature) Heat resistant type; Ambient temp: to +1 C to +7 F, Humidity: to % R.H. (Not freezing and condensing at low temperature) operating speed 1 cpm (At nominal switching capacity) Unit weight Approx. 33 g 1.1 oz Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. *. The upper operation ambient temperature limit is the maximum temperature that can satisfy the coil temperature rise value. Refer to Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT. ) Standard type ( V coil voltage) Characteristics Item Specifications Arrangement 1 Form A 1 Form C High contact capacity Contact Contact resistance (Initial) 1mΩ (By voltage drop V DC 1 A) Contact material Ag alloy (Cadmium free) Nominal switching capacity (Initial) A V DC N.O.: A V DC N.C.: A V DC A V DC Rating carrying current (Initial) (V DC, at C 1 F, continuous) A N.O.: A, N.C.: A A Nominal operating power 1.W 1.W 1.W, 1.W (PC board type) Note: All other specifications are the same as those of standard type (1 V coil voltage)
4 3) Heat resistant type (1 V and V coil voltage) Characteristics Contact Rating Item Notes: 1. All other specifications are the same as those of standard type (1 V coil voltage). *Current value in which carry current is possible when the coil temperature is 1 C 3 F 1V Arrangement 1 Form A 1 Form C High contact capacity Specifications V 1 Form A 1 Form C Contact resistance (Initial) 1mΩ (By voltage drop V DC 1 A) Contact material Nominal switching capacity (Initial) carrying current (Initial) (at C 1 F, continuous)* A 1V DC A 1V DC N.O.: A 1V DC N.C.: A 1V DC N.O.: A 1V DC N.C.: A 1V DC Ag alloy (Cadmium free) A 1V DC A 1V DC Nominal operating power 1.W 1.W 1.W A 1V DC 1.W (PC board type) A V DC A V DC N.O.: A V DC N.C.: A V DC N.O.: A V DC N.C.: A V DC 1.W 1.W High contact capacity A V DC A V DC 1.W, 1.W (PC board type) ) 3 A type (1 V coil voltage) Characteristics Item Specifications Arrangement 1 Form A 1 Form C Contact Contact resistance (Initial) TypmΩ (By voltage drop V DC 1 A) Contact material Ag alloy (Cadmium free) Nominal switching capacity (Resistive load) 3A 1V DC N.O.: 3A 1V DC, N.C.: A 1V DC carrying current (Initial) Rating (1V DC, at C 1 F, continuous) N.O.: 3A N.O.: 3A, N.C.: A Nominal operating power 1.W, 1.W (with resistor inside) switching capacity (Reference value)* 1A 1V DC (1V DC), 1A V DC (V DC) Initial insulation resistance MΩ (at V DC) Initial breakdown Between open contacts Vrms for 1 min. (Detection current: ma) Electrical voltage Between contacts and coil Vrms for 1 min. (Detection current: ma) characteristics Operate time (at nominal voltage) 1ms (excluding contact bounce time) (Initial) Release time (at nominal voltage) 1ms (excluding contact bounce time, without diode) (Initial) Mechanical characteristics Expected life Conditions Unit weight Shock resistance Functional m/s {G} (Half-wave pulse of sine wave: 11ms; detection: µs) Destructive 1, m/s {G} (Half-wave pulse of sine wave: ms) Vibration Functional Hz to Hz,.1m/s {.G} (Detection time: µs) resistance Destructive Hz to, Hz,.1m/s {.G} Time of vibration for each direction;. Y. Z direction: hours Electrical (at nominal switching capacity) Flux-resistant type:, Sealed type: (Operating frequency: s ON, s OFF) With diode inside: (Operating frequency: s ON, s OFF) Mechanical (at 1 cpm) Conditions for operation, transport and storage Ambient temp: C to + C F to +1 F Humidity: % R.H. to % R.H. (Not freezing and condensing at low temperature) operating speed 1 cpm (At nominal switching capacity) Approx. g.9 oz, Approx. g.99 oz (with diode inside) Note: * This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the actual load. ) 3 A type ( V coil voltage) Characteristics Item Specifications Contact Arrangement 1 Form A 1 Form C Rating Nominal switching capacity (Resistive load) 1A V DC N.O.: 1A V DC, N.C.: A V DC carrying current (1V DC, at C 1 F, continuous) N.O.: 1A N.O.: 1A, N.C.: A Nominal operating power 1.W,.W (with resistor inside) Note: All other specifications are the same as those of 3 A type (1 V coil voltage).
5 REFERENCE DATA CB RELAYS (Standard type) 1. Allowable ambient temperature. switching capability (Resistive load) (Standard type) Maximum Allowable Ambient Temperature, C A A A Actual value ( cycle) Applied Coil Voltage, %V Switching current, A Asssumption: Maximum mean coil temperature: 1 C Curves are based on 1.W (Nominal power consumption of the unsupprressed coil at nominal voltage) Switching voltage, VDC (N.O. side Room temperature) cycle line 3. Ambient temperature and operating voltage range (Standard type) Coil applied voltage, VDC 3 1 (Cold start) 1 Ambient temperature, C. Distribution of pick-up and drop-out voltage Sample: CB1-P-1V, pcs.. Distribution of operate and release time Sample: CB1-P-V, pcs. * Without diode Operate time Release time Quantity, n Voltage, V Operate and release time, ms -(1). Electrical life test (Motor free) Sample: CB1F-1V, pcs. Load: A 1V DC, motor free actual load Switching frequency: (ON:OFF = 1s:9s) Ambient temperature: Room temperature Circuit 1V DC Tested sample Relay harness Load current waveform Inrush current: A, Steady current: A M A Motor Observation of load waveform with current probe and digital oscilloscope ms Change of pick-up and drop-out voltage Pick-up and drop-out voltage, V 3 1 No. of operations, Change of contact resistance 3 No. of operations,
6 -(). Electrical life test (Lamp load) Sample: CB1F-1V, pcs. Load: /Wx parallel, 1V DC, halogen lamp actual load Switching frequency: (ON:OFF = 1s:s) Ambient temperature: Room temperature Circuit 1V DC Relay Halogen lamp 1V /W Observation of load waveform with current probe and digital oscilloscope Load current waveform Inrush current: A, Steady current: A.A ms Change of pick-up and drop-out voltage Pick-up and drop-out voltage, V 3 1 No. of operations, Change of contact resistance CB No. of operations, CB RELAYS (High contact capacity type) 1. Allowable ambient temperature. switching capability (High contact capacity type) Maximum Allowable Ambient Temperature, C A A A A 7A Applied Coil Voltage, %V Switching voltage, VDC cycle line Actual value ( 1 cycle) Switching current, A Asssumption: Maximum mean coil temperature: 1 C Curves are based on 1.W (Nominal power consumption of the unsupprressed coil at nominal voltage) 3. Ambient temperature and operating voltage range (High contact capacity type) Coil applied voltage, VDC 3 1 Operation range (Cold start) 1 Ambient temperature, C. Distribution of pick-up and drop-out voltage Sample: CB1aHF-1V, 3pcs. 7. Distribution of operate and release time Sample: CB1aHF-1V, 3pcs. Operate and release time, ms 1 Operate time Release time. Contact resistance Sample: CB1aHF-1V, 3pcs. (By voltage drop V DC 1A) Voltage, V 1 1 Coil voltage, V Resistance, mω
7 7-(1). Electrical life test (Motor free) Sample: CB1aH-1V, 3pcs. Load: Inrush current: A/Steady current: 3A Fan motor actual load (motor free) 1V DC Switching frequency: (ON:OFF = 3s:7s) Ambient temperature: Room temperature Circuit 3s s 7s M Change of pick-up and drop-out voltage Pick-up and drop-out voltage, V No. of operations, Change of contact resistance No. of operations, Load current waveform Inrush current: A, Steady current: 3A A ms 7-(). Electrical life test (Motor lock) Sample: CB1aH-1V, pcs. Load: A 1V DC Magnet clutch actual load (lock condition) Switching frequency: (ON:OFF = 1s:9s) Ambient temperature: Room temperature Circuit 1V DC M Clutch (V DC applied) Lock condition Change of pick-up and drop-out voltage Pick-up and drop-out voltage, V 3 1 No. of operations Change of contact resistance No. of operations Load current waveform A 1V DC A ms
8 RELAY (3 A type) 1-(1). Distribution of pick-up and drop-out voltage Sample: CB1aV-1V, pcs Voltage, V 1-(). Distribution of pick-up and drop-out voltage Sample: CB1aV-V, pcs Voltage, V 1-(3). Distribution of pick-up and drop-out voltage Sample: CB1V-V, pcs Voltage, V CB.-(1) Contact resistance Sample: CB1aV-1V, pcs. (By voltage drop 1 V DC 1A).-() Contact resistance Sample: CB1aV-V, pcs. (By voltage drop V DC 1A).-(3) Contact resistance Sample: CB1V-V, pcs. (By voltage drop V DC 1A) N.C. side N.O. side Electrical life test (Blower fan) Sample: CB1aV-D-V, 3pcs. Load: Blower fan load V DC Inrush current: A/Steady current: A Switching frequency: (ON:OFF = 3s:3s) Switching cycle: Ambient temperature: C Coil protective element: Diode Circuit 3s s 3s M Change of pick-up and drop-out voltage Pick-up and drop-out voltage, V No. of operations, Change of contact resistance No. of operations, Load current waveform Inrush current: A, Steady current: A A ms
9 DIMENSIONS (Unit: mm inch) 1. PC board type External dimensions Schematic (Bottom view) 1 Form A Form C a..31 a PC board pattern (Bottom view) (or)-. (or)-. 1 Form C type only Dimension: General tolerance 1mm.39 inch: ±.1 ±. 1 to 3mm.39 to.11 inch: ±. ±. 3mm.11 inch: ±.3 ±.1 (or)-1. (or)-. a Form C type only. Plug-in type * The dimensions are the same as those of 3A type. External dimensions Schematic (Bottom view) 1 Form A dia..7 dia Form C a..31 a Dimension: General tolerance 1mm.39 inch: ±.1 ±. 1 to 3mm.39 to.11 inch: ±. ±. 3mm.11 inch: ±.3 ±.1
10 3. Bracket type External dimensions Schematic (Bottom view).±.1 dia..13± ±.1.17± Form A dia..7 dia Form C a a* Dimension: General tolerance 1mm.39 inch: ±.1 ±. 1 to 3mm.39 to.11 inch: ±. ±. 3mm.11 inch: ±.3 ±.1. High contact capacity (Plug-in type) External dimensions Schematic (Bottom view) dia. hole -.7 dia. hole ±. -. ± ± ± Dimension: General tolerance 1mm.39 inch: ±.1 ±. 1 to 3mm.39 to.11 inch: ±. ±. 3mm.11 inch: ±.3 ±.1
11 . High contact capacity (PC board type) External dimensions Schematic (Bottom view) A* Sealed by epoxy resin * Intervals between terminals is measured at A surface level. PC board pattern (Bottom view) Dimension: General tolerance 1mm.39 inch: ±.1 ±. 1 to 3mm.39 to.11 inch: ±. ±. 3mm.11 inch: ±.3 ±.1 Cautions regarding the protection element 1. Part numbers without protection elements 1) 1 V models When connecting a coil surge protection circuit to these relays, we recommend a zener diode with a zener voltage of V or higher, or a resistor (Ω to 1,Ω). When a diode is connected to the coil in parallel, the release time will slow down and working life may shorten. Before use, please check the circuit and verify that the diode is not connected in parallel to the coil drive circuit. ) V models When connecting a coil surge protection circuit to these relays, we recommend a zener diode with a zener voltage of V or higher, or a resistor (,Ω to,7ω). When a diode is connected to the coil in parallel, the release time will slow down and working life may shorten. Before use, please check the circuit and verify that the diode is not connected in parallel to the coil drive circuit.. Part numbers with diodes These relays use a diode in the coil surge protection element. Therefore, the release time is slower and the working life might be shorter compared to part numbers without protection elements and part numbers with resistors. Be sure to use only after evaluating under actual load conditions. 3. Part numbers with resistors This part number employs a resistor in the coil surge protection circuit; therefore, an external surge protection element is not required. In particular, when a diode is connected in parallel with a coil, the release time becomes slower which could adversely affect working life. Please check the circuit and make sure that a diode is not connected in parallel with the coil drive circuit. For Cautions for Use, see Relay Technical Information.
12 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Panasonic: CB1-R-M-V CB1F-D-P-V
MICRO-ISO AUTOMOTIVE RELAY
MICRO-ISO AUTOMOTIVE RELAY RELAYS Plug-in type PC board type RoHS compliant FEATURES Micro-ISO type terminals Small size: mm(l) mm(w) mm(h). inch(l). inch(l). inch(h) Wide line-up PC board and Plug-in
More informationAUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO-280 RELAY
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO- RELAY CV RELAYS (ACV)... Micro ISO c type.. Micro plug-in type Micro ISO a type..... Micro PCB type RoHS Directive compatibility information http://www.nais-e.com/
More informationAUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO-280 RELAY FEATURES
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO- RELAY CV RELAYS (ACV) Micro ISO c type Micro ISO a type Micro plug-in type Micro PCB type FEATURES Low profile:. mm(l) mm(w). mm(h) inch(l). inch(w). inch(h) Low
More informationAUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO-280 RELAY
AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO- RELAY CV RELAYS (ACV) Micro ISO c type Micro ISO a type Micro plug-in type Micro PCB type FEATURES Low profile:. mm(l) mm(w). mm(h). inch(l). inch(w). inch(h) Low
More informationAUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO-280 RELAY
CV (ACV) Discontinued as of August, AUTOMOTIVE LOW PROFILE MICRO-ISO/MICRO- RELAY CV RELAYS (ACV)..... Micro ISO c type Micro ISO a type..... Micro plug-in type Micro PCB type Products to be discontinued.
More informationMicro-ISO Automotive Relay. (Unit: mm inch)
Micro-ISO Automotive Relay CM RELAYS Flux tight/sealed.. FEATURES Micro-ISO type terminals and small size Wide line-up Compact and high-capacity switching... TYPICAL APPLICATIONS
More informationSUPER MINIATURE PC BOARD TYPE AUTOMOTIVE RELAY
SUPER MINIATURE PC BOARD TYPE AUTOMOTIVE RELAY CJ RELAYS (ACJ) RoHS compliant FEATURES Smallest in its class, it is extremely compact at approx. 2/3 the size of previous products. Compared to our previous
More informationCP RELAYS POWER TYPE. TYPICAL APPLICATIONS Defoggers, Ignitions, Heaters, Accessories, Powered windows, etc. ORDERING INFORMATION TYPES
High Carrying Current Type Miniature Low Profile Automotive Relay CP RELAYS POWER TYPE Sealed 13.1 14.1 9..374 FEATURES Maximum carrying current of 3 A (4 mw type, 1 V applied)
More informationCompact Flat Size Relay for Automotive. (Unit: mm inch)
Compact Flat Size Relay for Automotive CP RELAYS Sealed 13.1.1 9..374 13.1.1 1..413 FEATURES Compact flat type PC board terminal type: 9. mm.374 inch Compact and High
More informationSUPER MINIATURE TWIN TYPE AUTOMOTIVE RELAY FEATURES
SUPER INIATURE TWIN TYPE AUTOOTIVE RELAY CT RELAYS (ACT) 7.... Twin type ( terminals) 7.. 7... FEATURES Small & slim size Twin type: 7.(L).(W) (H)mm.(L).(W).(H)inch Slim c type: 7.(L) 7.(W) (H)mm.(L).(W).(H)inch
More information20 AMP POWER RELAY HG RELAYS. a HG HG HG Unit weight. Ex. HG 2 AC 240 V
20 AMP POWER RELAY HG RELAYS a 3 1.4 5 RoHS Directive compatibility information http://www.nais-e.com/ a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A 250 V AC resistive and 1.5 kw 3 phase 220 V AC motor
More informationHG RELAYS 20 AMP POWER RELAY FEATURES SPECIFICATIONS
20 AMP POWER RELAY RELAYS a 3 1.4 5 a.0 50.0 1.99 8.0 2. FEATURES Large capacity 20 A V AC resistive and 1.5 kw 3 phase 220 V AC motor loads High contact reliability after long use Usable with direct soldering,
More information1a/1c 5A/10A small power relays
VDE a/c A/A small power relays RELAYS Compliance with RoHS Directive FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw (c) High surge voltage:,
More information16A POWER RELAY FOR MICRO WAVE OVEN
VDE 6A POWER RELAY FOR MICRO WAVE OVEN LE RELAYS (ALE) TMP type New FEATURES. Price competitive having better price competitiveness (New 4 mw only) 2. Supports magnetron and heater loads. Switching possible
More informationULTRA LOW PROFILE 2 A POLARIZED RELAY. mm inch. Initial breakdown voltage
TESTING ULTRA LOW PROFILE POLARIZED RELAY RELAYS 9...7 mm inch FEATURES Low profile mm.7 inch height High contact capacity: Surge withstand between contact and coil:, V (Telcordia) RoHS Directive compatibility
More informationCompact size 2 Form A and 2 Form A 1 Form B 35A power relays for energy management and industrial equipment. Conditions. Mirror contact mechanisms
Compact size and 3A power relays for energy management and industrial equipment HE-S RELAYS New TYPICAL APPLICATIONS Photovoltaic power generation systems (Solar inverter) Uninterruptible Power Supplies
More informationSuitable for lighting and motor load, 1 Form A 50A latching relays
Suitable for lighting and motor load, 50A latching relays DJ-H RELAYS (ADJH) 9.0 5 1 0.2 9.0 5 New 1 FEATURES 1. High inrush capability Tungsten load (TV-20 class) Electronic ballast load (NEMA10) Capacitive
More informationCOMPACT PC BOARD POWER RELAY
VDE PACT PC BOARD POWER RELAY JW RELAYS.... Compliance with RoHS Directive FEATURES Miniature package with universal terminal footprint High dielectric withstanding for transient protection:, V surge in
More informationCOMPACT PC BOARD POWER RELAY
VDE PACT PC BOARD POWER RELAY JW RELAYS..... RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Miniature package with universal terminal footprint High dielectric withstanding for
More informationDistributed by: www.jameco.com 1-8-81-44 The content and copyrights of the attached material are the property of its owner. SLIM POLARIZED RELAY TN RELAYS.551. 9.8.86 FEATURES Small header area makes higher
More informationHIGH ELECTRICAL & MECHANICAL NOISE IMMUNITY RELAY
VDE JQ HIGH ELECTRICAL & MECHANICAL NOISE IMMUNITY RELAY JQ RELAYS.77.39.. mm inch FEATURES High electrical noise immunity High switching capacity in a compact package High sensitivity: mw (a), mw () High
More informationEN GWT compliant Low profile: 15.7mm.618inch height 1a/1c 16A power relay
EN6033-1 GWT compliant Low profile: 1.7mm inch height 1a/1c 16A power relay LZ-N RELAYS (ALZN) Protective construction: Flux-resistant type New 12. 28.8.492 RoHS compliant 1.7 (Unit: mm inch) FEATURES
More informationCOMPACT PC BOARD POWER RELAY FEATURES. Characteristics. Initial breakdown voltage* 1. Vibration resistance
VDE PACT PC BOARD POWER RELAY JW RELAYS..... FEATURES Miniature package with universal terminal footprint High dielectric withstanding for transient protection:, V surge in µs between coil and contact
More informationCOMPACT AND HIGH CAPACITY GENERAL PURPOSE POWER RELAYS
COMPACT AND HIGH CAPACITY GENERAL PURPOSE POWER RELAYS HK RELAYS (AHK) RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Compact and high-capacity Form C: A, Form C: high capacity
More information8 A MINIATURE POWER RELAY IN DS RELAY SERIES FEATURES
A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS FEATURES DSPa.. DSPa DSP.... Power types added to DS relay series High switching capacity: a: A V AC / ab, a: A V AC High sensitivity: mw pick-up power
More information1a 16A power relay for micro wave oven
VDE 1a power relay for micro wave oven LE RELAYS (ALE) RoHS compliant FEATURES 1. Supports magnetron and heater loads. Capable for switching magnetron and heater loads found in microwave ovens. 2. Excellent
More informationLoad for air conditioner 1a 20A power relays
VDE Load for air conditioner 1a A power relays LF RELAYS (ALF) TMP type PCB type RoHS compliant FEATURES 1. Ideal for compressor and inverter loads 1) Compressor load: A 5V AC ) Inverter load: A V AC,
More informationCompact Relay Family with Forcibly Guided Contacts
Compact Relay Family with Forcibly Guided Contacts SF-Y RELAYS -pole ( Form A Form B, Form A Form B) -pole ( Form A Form B, 5 Form A Form B) RoHS compliant FEATURES. Forcibly guided contact structure Relay
More informationLOW-PROFILE SURFACE-MOUNT RELAY. Characteristics. Initial breakdown voltage. Initial surge voltage. Temperature rise* 2 (at 20 C) Max.
TESTING LOW-PROFILE SURFACE-MOUNT RELAY RELAYS 5.6. mm inch FEATURES Low-profile: 6 mm.36 inch in height comforming to EIA standards (Tape height: max. 6.5 mm.56 inch ) Tape and reel package is available
More information8 A MINIATURE POWER RELAY IN DS RELAY SERIES
DSP A MINIATURE POWER RELAY IN DS RELAY SERIES DSP RELAYS DSPa.. DSPa.. DSP.. RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Power types added to DS relay series High switching
More informationLOW-PROFILE SURFACE-MOUNT RELAY
TESTING LOW-PROFILE SURFACE-MOUNT RELAY TQ SMD RELAYS.6. RoHS Directive compatibility information http://www.nais-e.com/ FEATURES Low-profile: 6 mm.36 inch (Tape height: max. 6. mm.6 inch) Tape and reel
More informationDistributed by: www.jameco.com -8-83-22 The content and copyrights of the attached material are the property of its owner. VDE TV-, AMP ( Form A) Power Relay HE RELAYS.299 3.8.9 RoHS Directive compatibility
More informationHIGH SENSIBILITY RELAY WITH GUARANTEED LOW LEVEL SWITCHING CAPACITY
HIGH SENSIBILITY RELAY WITH GUARANTEED LOW LEVEL SWITCHING CAPACITY SX RELAYS (ASX) 1. FEATURES 1. High contact reliability over a long life has been made possible for low level loads. Using a low level
More informationDistributed by: www.jameco.com 188314242 The content and copyrights of the attached material are the property of its owner. S 4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENTS S RELAYS 28. 1.12 12..472
More information4 AMP POLARIZED HIGH DENSITY RELAY WITH HIGH SENSITIVITY FEATURES
4 AMP POLARIZED HIH DENSITY RELAY WITH HIH SENSITIVITY SRELAYS FEATURES 28. 1...472 1.4.49 mm inch A variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available
More informationLOW PROFILE 2 FORM C RELAY TQ RELAYS Ð Ð.008. mm inch. M.B.B.type. Initial breakdown voltage 1 A 30 V DC. 200 mw.
LOW PROFILE FORM C RELA RELAS 9.3 6.7.. Ð Ð.8. 9.3. Ð Ð.8 mm inch FEATURES High sensitivity: Form C: power consumption (single side stable type) Form C: power consumption (single side stable type) Surge
More information1a/1c/2a/2c/5A/10A power relays for power supply
Automation Controls Catalog VDE a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant /Sealed ORDERING INFORMATION Contact arrangement : Form C a:
More informationCompliant with European standards 1a/1c 6A Slim power relays
PF (APF) VDE Compliant with European standards 1a/1c 6A Slim power relays PF RELAYS (APF) RoHS compliant FEATURES 1. High density mounting with mm.197 inch width Space saved with mm.197 inch slim type
More informationMINIATURE POWER RELAY IN DS RELAY SERIES FEATURES resistance ORDERING INFORMATION. Ex. DSP 1 L DC12V R
MINIATURE POWER RELAY IN DS RELAY SERIES DSP- RELAYS DSPa DSP SPECIFICATIONS.. DSPa Coil (polarized) (at C F) Minimum mw power coil latching mw mw power coil latching mw.... Contact Arrangement a ab a
More information10 A MINIATURE POWER RELAY mm inch. 2 Form A, 1 Form A 1 Form A. Initial breakdown voltage* 2. Vibration resistance.
VDE A MINIATURE POWER RELAY RELAYS a..9.9 SPECIFICATIONS power FEATURES.9 ab.9 Contact, Arrangement Form A Form A Form B Initial contact resistance, ma. (By drop V DC A) mω Contact material Gold flash
More informationSLIM COMPACT SAFETY RELAY
SLIM COMPACT SAFETY RELAY SF-RELAYS Slim type Max. 24.945 Max. 24.945 Max. 4.575 Max. 5.969 Max. 3.52 Max. 3.52 mm inch FEATURES Forcibly guide contact structure (EN525 ClassA TÜV recognized) Slim profile
More informationSMALL POLARIZED RELAY WITH HIGH SENSITIVITY
TESTING SMALL POLAIZED ELA WITH HIGH SENSITIVIT TF-ELAS. 9..7 mm inch FEATUES High sensitivity: 8 power (Single side stable - V type) Surge withstand: V FCC Part 68 Minimal magnetic interference allows
More information4 mm height! 2 A high capacity 1 Form C type ultra thin, super miniature relay
4 mm height! A high capacity Form C type ultra thin, super miniature relay TK RELAYS TK RoHS compliant FEATURES. Compact and flat type.6(l) 9.(W) 4.(H).47(L).34(W).7(H). High contact capacity: A 3. Outstanding
More informationHigh Sensitivity, with 100mW nominal operating power, in a compact and space saving case
High Sensitivity, with mw nominal operating, in a compact and space saving case GN RELAYS (AGN) RoHS compliant FEATURES. Compact slim body saves space Thanks to the small surface area of.7 mm.6 mm.4 inch.47
More information4 A CAPACITY, THE VARIETY OF CONTACT ARRANGEMENTS FEATURES
4 A CAPACITY, THE VARIETY OF CONTACT ARRANEMENT RELAY 28. 1.2 12..472.4.49 FEATURE The variety of contact arrangements 2 Form A 2 Form B, 3 Form A 1 Form B, 4 Form A Latching types available High sensitivity
More informationRK RELAYS FEATURES. SPECIFICATIONS Contact. 1.5 GHz MICROWAVE RELAY
. GHz MICROWAVE RELAY RK RELAYS..79.. 9.7.3 mm inch FEATURES Excellent high frequency characteristics (Impedance 7Ω) Isolation: db (at. GHz) Insertion loss:.db (at 9 MHz) :. (at 9MHz) High sensitivity
More information1.5 GHz MICROWAVE RELAYS. FEATURES 1. Excellent high frequency characteristics. V.S.W.R. (Max.) 1.5 (at 900 MHz) Impedance
1.5 GHz MICROWAVE RELAYS RK RELAYS RoHS compliant FEATURES 1. Excellent high frequency characteristics V.S.W.R. () 1.5 (at 9 MHz) Impedance 5Ω Impedance 75Ω Insertion loss (db. ) Isolation (db. ) V.S.W.R.
More informationMINIATURE RELAY FOR WIDER APPLICATIONS
TÜV Rheinland HJ MINIATURE RELAY FOR WIDER APPLICATIONS HJ RELAYS FEATURES contact arrangements Form C (for A 0 V AC), Form C (for 0 A 0 V AC)* Excellent contact reliability by Au plating Environmentally
More information4 mm height! 2 A high capacity 1 Form C type ultra thin, super miniature relay
4 mm height! A high capacity Form C type ultra thin, super miniature relay TK RELAYS TK FEATURES. Compact and flat type.6(l) 9.(W) 4.(H).47(L).4(W).7(H). High contact capacity: A. Outstanding surge resistance
More informationUNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY. UL File No.: E43149 CSA File No.: LR26550
UNIQUELY DESIGNED RELAY WITH HIGH SENSITIVITY K-RELAYS.0 a UL File No.: E3 CSA File No.: LR2550.0.8 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical
More informationRelay for control panel of 1c 10A, 2c 5A and 1a 16A
HN (AHN) VDE Relay for control panel of c A, 2c A and a 6A HN RELAYS (AHN) RoHS compliant FEATURES. Slim and compact size % smaller (width and height) than existing model* (with the condition of screw
More information1a/1c/2a/2c/5A/10A power relays for power supply
a/c/2a/2c/a/a power relays for power supply JW RELAYS RoHS compliant Protective construction: Flux-resistant type/ ORDERING INFORMATION JW Contact arrangement : Form C a: Form A 2: 2 Form C 2a: 2 Form
More information30 AMP POWER RELAY WITH SPACE SAVING DESIGN
VDE 3 AMP POWER RELAY WITH SPACE SAVING DESIGN JH-RELAYS 2..2 3.. FEATURES Many safety-oriented characteristics incorporated Contact gap: more than 3 mm. inch for Form A and 2 Form A Breakdown voltage
More informationNew pin layout (LT type) added. Best seller with broad lineup and AC 2000 V breakdown voltage.
Compliance with RoHS Directive FEATURES. 2, V breakdown between contact and coil The body block construction of the coil that is sealed at formation offers a high breakdown of 2, V between contact and
More informationSlim type safety relays. FEATURES 1. Acquisition of Korean safety certification ( S mark) Excluding with diode type
Slim type safety relays SF RELAYS Slim type RoHS compliant Protective construction: Flux-resistant type ORDERING INFORMATION S: Slim type Contact arrangement 2: 2 Form A 2 Form B 3: 3 Form A Form B 4:
More information200A type has been added. High Capacity of Max. 1,000 V DC Cut-off Possible
EP (A, A (AEP) and 80A types) 0A type has been added. High Capacity of Max.,000 V DC Cut-off Possible EP RELAYS (AEP) A PC board type A TM type A TM type 80A type New 0A type 300A type RoHS compliant FEATURES.
More informationDistributed by: www.jameco.com -8-83-44 The content and copyrights of the attached material are the property of its owner. D HIGHLY ENITIVE 5 V FCC URGE WITHTANDING INIATURE RELAY D RELAY D4E 35.4.387
More informationHIGH INSULATION RELAYS (Conforming to the supplementary insulation class of EN Standards (EN41003))
TESTING HIGH INSULATI RELAYS (Conforming to the supplementary insulation class of EN Standards (EN)) TX-D RELAYS.9.9 8...9.9 8.. FEATURES Approved to the supplementary insulation class in the EN standards
More informationRelay for control panel of 1c 10A, 2c 5A and 1a 16A
Relay for control panel of c, 2c A and a 6A HN RELAYS (AHN) FEATURES. Slim and compact size % smaller (width and height) than existing model* (with the condition of screw terminal socket for DIN rail)
More informationHIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE
HIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE RELAYS (60A type only) A PC board type A TM type 60A Screw terminal type 80A Connector type 300A Connector type Compliance with RoHS Directive
More informationMINIATURE POWER RELAY mm inch. 2 Form A, 1 Form A. 1 Form B. Initial breakdown voltage* 2 8 A 250 V AC 8 A 30 V DC 250 V AC, 30 V DC
VDE MINIATURE POWER RELAY DKRELAYS a..9.9 ab.9.9 FEATURES Large capacity in small size: A V AC (a) High sensitivity: mw nominal power High breakdown, Vrms between contacts and coil, Vrms between open contacts
More information20 AMP POWER RELAY HG RELAYS
0 AMP POWER RELAY RELAYS RoHS Directive compatibility information http://www.mew.co.jp/ac/e/environment/ FEATURES. High-capacity and long life The electrical life of this high capacity is 0A 00,000 operations
More informationCAPSULE CONTACT MECHANISM AND HIGH-CAPACITY CUTOFF COMPACT RELAY FEATURES
CAPSULE CONTACT MECHANISM AND HIGH-CAPACITY CUTOFF COMPACT RELAY EV RELAYS (AEV) 80A A 0A FEATURES. High-, high-current control possible 0 high- switching cutoff has been achieved thanks to a sealed construction
More informationTV-15, 30 AMP (1 Form A) Power Relay
VDE TV-, 3 AMP ( Form A) Power Relay RELAYS Form A Plug-in type Form A type also available with 48A contact capacity FEATURES. Excellent resistance to contact welding Owing to the pre-tension and kick-off
More informationHIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE
HIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE RELAYS (60A type only) 0A PC board type 0A TM type 60A Screw terminal type 80A Connector type 300A Connector type FEATURES. High-, high-current
More informationHigh switching capacity 1a/1c 30A power relays
Automation Controls Catalog High switching capacity 1a/1c 3A power relays JT-N RELAYS PCB type FEATURES High switching capacity: 3 A for 1 Form A 2 contact arrangements: 1 Form A or TMP types available
More informationNotes and Guidelines. Therefore consideration should be given to each specific application for: rating and type of load
GENERAL CATALOG AUTOMOTIVE RELAYS Notes and Guidelines Panasonic is part of a large worldwide group selling relays and associated switching products under different brand names in different territories.
More informationTransistor drive 2c/4c 5A slim power relays
Transistor drive 2c/4c 5A slim power relays RELAYS 4 Flat type () 4 () 2 Flat type () 2 () FEATURES. Compact, slim design Use of high-performance flat electromagnetic design achieves 0.9 mm.429 inch profile,
More information1a 8A, 1a1b/2a 5A small polarized power relays
Automation Controls Catalog a A, ab/a A small polarized power DSP RELAYS RoHS compliant Protective construction: Sealed type FEATURES. Compact with high contact rating Even with small mm. inch (H) mm.
More informationHigh breakdown voltage type is available (1.5 kv between open contacts)
TESTING High type is available (.5 kv between open contacts) TX-D RELAYS New Compliance with RoHS Directive FEATURES. Lineup now includes high type that achieves between open contacts of,5 V AC. between
More informationSlim compact safety relay
Slim compact safety relay SF RELAYS Slim type Max..9 Max..9 Max.. Max..99 Max.. Max.. mm inch FEATURES Forcibly guide contact structure (EN Class A TÜV recognized) Slim profile (mm inch) Compact size with
More informationUNIQUELY DESIGNED RELAY FEATURES
UL CSA VDE Pending Pending Pending UNIQUELY DESIGNED RELAY K-RELAYS a.8 FEATURES 00 times more reliable than similar designs Extra long life Mechanical: more than 0 8 operations Electrical ( A V): more
More informationHIGHLY SENSITIVE 1500 V FCC SURGE WITHSTANDING MINIATURE RELAY FEATURES. Max. operating speed. Initial. Reset time* 3 (at nominal voltage)
TETING HIGHLY ENITIVE 5 V FCC URGE WITHTANDING INIATURE RELAY D-RELAY D4E 35.4.387 5.59 DE.39 9.8.386.39 9.8.386 PECIFICATI Contact Arrangement Initial contact resistance, max. (By voltage drop 6 V DC
More information1a 8A, 1a1b/2a 5A small polarized power relays
a A, ab/a A small polarized power DSP RELAYS Compliance with RoHS Directive FEATURES. Compact with high contact rating Even with small mm. inch (H) mm. inch (W) mm. inch (L) (dimensions, high capacity
More informationHIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE FEATURES
HIGH VOLTAGE AND CURRENT CUT-OFF CAPACITY IN A COMPACT PACKAGE (60A type only) RELAYS A PC board type 80A Connector type 60A Screw terminal type A TM type 300A Connector type RoHS Directive compatibility
More information1 GHz capable, 3 W carrying power (at 1 GHz), 50Ω impedance and 2 Form C relays
1 GHz capable, 3 W carrying power (at 1 GHz), 5Ω impedance and 2 Form C relays RA RELAYS (ARA) 9.7 14.7.382.579 5.9.232 mm inch RoHS compliant Protective construction: Sealed type ORDERING INFORMATION
More informationHigh Capacity of Max. 1,000 V DC Cut-off Possible
EP (A (AEP) and 80A types) High Capacity of Max.,000 V DC Cut-off Possible EP RELAYS (AEP) A PC board type A TM type New A TM type 80A type 300A type Compliance with RoHS Directive FEATURES. High-, high-current
More informationG5NB. A Miniature Relay with 1-pole 3A/5A Switching Capability and 10 kv Impulse Withstand Voltage. Application Examples. Model Number Legend
PC Power Relay A Miniature Relay with -pole A/5A Switching Capability and 0 kv Impulse Withstand Voltage Highly efficient magnetic circuit for high sensitivity (200 mw). Small, yet provides 0-kV impulse
More informationHC RELAY PRODUCT TYPES
FROM SEQUENCE TO POWER CIRCUITS COMPATIBLE WORLDWIDE HC RELAY PRODUCT TYPES Standard type Amber sealed type FEATURES. Long track record means reliable quality.. Can provide switching across the range from
More informationPCB Relay SPST-NO G6CU-1117P-US G6CU-1114P-US G6CU-1117C-US G6CU-1114C-US SPST-NO + SPST- G6CU-2117P-US G6CU-2114P-US G6CU-2117C-US G6CU-2114C-US
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load Compact: 20 15 10 mm (L W H). Low power consumption: 200 mw. Flux protection or fully sealed construction available. Unique
More informationClassification Terminal Shape Contact form Enclosure rating Model Rated coil voltage
ow-profile Relay with Various Models ow profile:.7 mm in height. Creepage distance 8mm between coil and contacts 0 kv Impulse withstand voltage Models with AC coil available. High-Inrush model available
More information8 A MINIATURE POWER RELAY IN DS RELAY SERIES
A MINIATURE POWER RELAY IN DS RELAY SERIES RELAYS FEATURES. Compact with high contact rating Even with small mm. inch (H) mm. inch (W) mm. inch (L) (dimensions, high capacity switching is provided: a,
More information4. Classification E: High capacity. 3. Terminal Form Blank: Tab terminals (#250 terminals) Tab terminals #250 SPST-NO
New Product News G9EJ--E Compact Capable of Switching 4 V A DC loads Actualize a high capacity interruption through the function of extinction of magnetic arc by adopting high-efficiency magnetic circuit.
More information3 GHz capable, 10 W carrying power (at 3 GHz), 50Ω/75Ω impedance and 1 Form C relays
3 GHz capable, W carrying power (at 3 GHz), Ω/7Ω impedance and Form C relays RS RELAYS (ARS) RoHS compliant FEATURES. Miniature design 4 8.6 7. mm..83 inch (standard terminal) 6% OFF in volume (Compared
More informationSPST-NO SPDT DPST-NO DPDT
PCB Relay A Power Relay with Various Models High-sensitivity ( mw) and High-capacity ( A) Models available. Low profile:.7 mm max. in height Conforms to VDE (EN0-), UL and CSA.. Meets EN0- requirements
More information2 AMP. HIGH CAPACITY RELAY WITH HIGH SURGE VOLTAGE & HIGH BREAKDOWN VOLTAGE FEATURES. Characteristics. Initial breakdown voltage
TESTING 2 MP. HIGH PITY RELY WITH HIGH SURGE VOLTGE & HIGH REKDOWN VOLTGE TX-RELYS 8.4.33 FETURES reakdown voltage between contacts and coil: 2, V Surge withstand between contacts and coil: 2, V High contact
More informationDATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 3921/ 5931
Product specification January 16, 2017 V.2 DATA SHEET SHUNT RESISTOR PU series 5%, 1% sizes 321/ 531 RoHS compliant & Halogen free Product specification 2 SCOPE This specification describes shunt resistor
More informationUP TO 8GHz SMALL MICROWAVE RELAYS
RJ (RJ) UP TO 8GHz SMLL MICROWVE RELYS RJ RELYS (RJ) RoHS compliant FETURES Excellent high frequency characteristics (Ω, at GHz) V.S.W.R.: Max. 1.2 Insertion loss: Max..dB Isolation: Min. 3dB (Between
More informationCOMPACT SIZE HIGH PRECISION TIMERS VARIOUS OUTPUT & OPERATION MODE TYPES. UL File No.: E CSA File No.: LR39291
COMP SIZE HIGH PRECISI IMERS VARIOUS OUPU & OPERAI MODE YPES SDX (one) SDX imers Features UL File No.: E22222 CSA File No.: LR3929 3 operation modes added for fuller lineup Now, operation modes include
More informationRT-3 UNIT RELAY 4-POINT TERMINAL
Slim, Space-saving, -point Unit Relay RT-3 UNIT RELAY -POINT TERMINAL [PA Relay type, PhotoMOS Power (Voltage sensitive type)] RT-3 Unit relay -point Terminal [PA relay, PhotoMOS Power (Voltage sensitive
More informationPalm-sized, 16-channel Relay Terminals
Palm-sized, -channel Relay Terminals RELAY TERMINAL FEATURES. Possible to select relay for use in the relay terminal in accordance with load. [Mountable relay: PA relay and Power PhotoMOS (voltage sensitive
More informationLOW PROFILE 2 FORM C RELAY mm inch. M.B.B.type. Initial breakdown voltage 1 A 30 V DC 30 W, 62.5 V A 30 W.
TESTING LOW PROFILE 2 FORM RELY TQ-RELYS 9.34 26.7 +.4..2 +.6.8 4. 9.34 +.4.2 +.6.8 FETURES High sensitivity: 2 Form : 4 power consumption (single side stable type) 4 Form : 28 power consumption (single
More informationPCB Relay. Ordering Information. SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks 8-A Load
PCB Relay SPST-NO Type Breaks 10-A Loads; SPST-NO + SPST-NC Type Breaks -A Load Compact: 20 x 15 x 10 mm (L x W x H). Low power consumption: 200 mw. Flux protection or plastic-sealed construction available.
More informationG8HN-J. Specifications. Contact Data. Automotive PCB Relay based on Micro ISO. Features
Automotive PCB Relay based on Micro ISO Features DC 24V specification. High capacity specification (35A). Covered MINI ISO by high capacity type. Achieve low heat generation and improve connection confidence
More informationULTRA LOW PROFILE 2 AMP. POLARIZED RELAY. mm inch. Initial breakdown voltage
TESTING ULTR LOW PROFILE MP. POLRIZED RELY TK-RELYS.6.47 9..34 4..7 FETURES Low profile 4 mm.7 inch height High contact capacity: Surge withstand voltage between contact and coil: V (ellcore rating) SPEIFITIS
More information1a 10 A,1a1b/2a 8 A small polarized power relays
VDE a 0 A,ab/2a 8 A small polarized power relays DK RELAYS FEATURES. Compact with high capacity High capacity switching in a small package: Form A, 0 A 250 V AC; Form A Form B and 2 Form A, 8 A 250 V AC.
More informationPARM-SIZED, 16-CHANNEL RELAY TERMINALS
Pressure connector connect type Wire-direct connect type PARM-SIZED, -CHANNEL RELAY TERMINALS FEATURES Compact, space-saving design: The Relay Terminal with I/O channels measures only (W) (D) (H) mm (W).
More informationG6C. Miniature High Capacity Relays with SPST-NO 10A and SPST-NO + SPST-NC 8A. Model Number Legend. Application Examples.
Miniature High Capacity Relays with SPST-NO 0A and SPST-NO + SPST-NC A SPST-NO 0A and SPST-NO + SPST-NC A for power switching and output that satisfy the needs for space-saving. Small High-capacity Relays
More informationRelays & Sockets. RF1V Force Guided Relays/SF1V Relay Sockets. Certification Organization/ File Number. UL/c-UL File No.
RFV Key features: Compact and EN compliant RFV force guided relays Force guided contact mechanism (EN00 Type A TÜV approved) Contact configuration -pole (NO-NC, 3NO-NC) 6-pole (NO-NC, NO-NC, 3NO-3NC) Built-in
More informationFeatures. Insulation system F 835-1A-F-C 835-1A-F-S L-1A-C 835L-1A-S F 835L-1A-F-C 835L-1A-F-S NL-1A-C 835NL-1A-S
Type List Terminal style PCB terminal L PCB terminal NL PCB terminal Contact form 1A (SPNO) 1A (SPNO) 1A (SPNO) Insulation system Features Miniature 12A 12VAC, A 20VAC/30VDC PCB Relay. UL/CUL, CSA, TUV,
More information