The top 50. Your customers need solutions, not a sales pitch. They want products that are time tested, reliable and easy to use. They want the best.

Transcription

1 The top 50

2 The top 50 Your customers need solutions, not a sales pitch. They want products that are time tested, reliable and easy to use. They want the best. That is what we are here to provide. This catalog chooses the best from our thousands of products, and outlines them in a format that is quick and easy to understand. We hope it will serve to keep your customers satisfied and maybe help you to discover a few new favorites.

3 CONTENTS SINCLAIR TECHNOLOGIES, antennas PULSE INC., antennas PCTEL INC., antennas ASTRON CORPORATION power supplies ICT, power supplies SAMLEX AMERICA, power supplies TCC, connectors MOBILIZER SMOOTHTALKER, boosters IMPACT, accessories PRYME, accessories ANTENNA BASICS CONNECTOR BASICS COAXIAL BASICS mobiletrends.ca

4 1 01 SVB-1482 Omni Antenna 2 dbd, 1/2 wave, MHz Weather proof base with sealing gasket. The Excelsior spring pin base included. Heavy duty construction for high performance. Q2220E Duplexer Exterior finish will not chip or flake and is resistant to Ultra Violet radiation. 1/2 wave with 26 MHz bandwidth. 02 Q-Circuit, Res-Lok, 4 cavity, rack mount, MHz This unit is extremely versatile and provides stable performance at very low frequency separations and insertion loss values. Sinclair makes state of the art products. The company has been dedicated to developing innovative, high quality products, bringing many industry firsts to market. Never one to shy away from a challenge, Sinclair offers custom solutions, and is always open to customer feedback and ideas. Dimensions: 19 by 30.3 by 4.17 Weight: 28Lbs. Four cavity duplexer with 70 db of isolation. 1.5 db insertion loss at 500 KHz. CLAMP Carbon steel. Hot dip galvanized. Pipe 1: diameter. Pipe 2: diameter.

5 2 04 SY406-SF4SNM Yagi Antenna Directional, 10 dbd, black anodized, MHz This antenna is designed for versatility and easy installation. Elements are at DC ground for lightning protection. This antenna can also come in phased arrays for increased gain. Black anodized aluminum for long life. 360 degree welded elements for durability and reliability. 10 dbd gain with low VSWR. 05 CLAMP0017 Pipe to 90 degree pipe. Galvanized Steel. Pipe 1-1.5"-3.5" Pipe 2-1.5"-3.5" SD212-SF2P2SNM 2 Dipole Antenna 5.0 dbd, bi-directional, MHz 06 SCAN ME The SD212 is designed for settings where moderate gain is necessary. Coverage exists in 3 sub bands MHz (civil aviation), MHz (private networks, public safety) and MHz (transportation). 5.0 dbd gain with bi-directional pattern. 300 Watt power handling. Can be top or side mounted (Universal mount).

6 3 NMOKHFUD Cable Mount NMOHF mounts convert low frequency applications to high frequency applications by pulling or replacing the center pin and insulator. These mounts require 3/4 hole for mounting, and include 17 of coax. RG58/U dual shield. For Motorola style mobile antenna MHz. Nickel, copper and zinc. Accommodates roof of 0.1 to Our customers love the NMO series antennas and mounts from Pulse/Larsen. These items are in constant demand for their easy use, reasonable pricing and consistent quality. Pulse creates our customer s go-to NMO mounts. NMOWB150C Wideband Halfwave MHz. Gain 2dBi. NMO mount. Stainless steel whip max height PL259 UHF Male UHF male solder female. UG175 adaptor for use on RG 55, 58, 141 and 142 Cables.

7 4 NMOKUD 04 This is a standard 3/4 mount for a 3/4 hole. Uses RG-58 dual shield coax cable. No connector is included with this mount. SCAN ME For Motorola style mobile antennas MHz. Nickel plated stainless steel mount. Includes 17 feet of coax. Note: If mounting to a thick roof, NMOHFTHK accommodates roof surfaces up to 1/2 thick. 05 NMOWBQC Most commonly used with NMOKHFUD mount and RG58U Coax MHz. Wide band 1/4 wave. 2dBi gain. Stainless steel whip. 06 NMOKHFUDFME UD, RG-58U Dual Shield. FME connector. ROHS compliant. Cable mounting option. NMOHF direct.

8 5 01 MHB-5800 Antenna This antenna has a heavy wall tapered housing, triple plated brass fittings and a matching coil. It will maintain frequency even in heavy shock vibrations. 5/8 wave antenna MHz. Field-tunable. 3 db gain. Maximum power input is 200 watts. PCTEL/Maxrad is a long standing customer favorite for antennas. PCTEL provides reliable, affordable and versatile products that meet our customer s rigorous demands. SCAN ME MLB-2700 Lowband Antenna 03 These antennas are popular for serious CB applications. The coil is low loss to handle shocks. The housing is designed to protect against water damage MHz, unity, 200W. Mates with 1-1/8 18 thread mounts. PCTCNMFT 1/4 Wave 1/2 Wave Antenna MHz. Field Tunable. <2.0:1. 04 This antenna is wideband, field tunable and designed to withstand high vibrations. 06 These antennas are durable and super flexible, with brass contact button to protect against shock. MWV1322 Base Loaded Mates with 1-1/8 18 thread mount MHz. Bandwidth 26MHz. 2.4dB with ground plane. Unity without. Max Power 200W. MWB1320 1/4 Wave 07 This antenna addresses equipment interoperability challenges by providing increased bandwidth coverage. Spring only option. Mates with 1 1/8 18 thread mounts MHz. Wideband. Bandwidth 24 MHz.

9 6 NMO58U-NC NMO Mount 02 This item is a brass NMO series, with a gold contact pin and brass nut ring. It can be used for metal thickness of up to These mounts install from above. Kit for Motorola style mobile antennas. 3/4 hole, 1-1/8 thread MHz. 17 feet of RG58/U cable. MWV1322S Base Loaded 1/2 Wave Antenna 05 This is the same antenna as 4! Its such a favorite that adding a spring makes it just as popular! Mates with 1-1/8 18 thread MHz. Bandwidth 26 MHz. 2.4dB or Unity. Wideband. MBMC-NC Chrome mirror bracket mount. 1-1/8 18 thread. Mirror Mount. 17 RG58U No connector. 08

10 7 SL11 Linear Power Supply Slim Line series have more compact bodies for restricted space applications. 01 Solid state electronically regulated. Fold-back current limiting protects from excessive current and continuous shorted output. Crowbar over voltage protection on all models except RS-3L, RS-4L and RS-5L. 02 N Voltage Converter This step down DC/DC converter offers high efficiency conversion. Designed for negative ground systems/vehicles. Best suited to heavy vehicles, and industrial settings. Input VDC to output 13.8 VDC. Continuous current 10 AMP. 6.2 x 6 x 2 inches. VS-20ML Variable Power Supply Solid state regulated 20 Amp variable power supply. These units have a chassis mounted fuse and less than 5 mv ripple peak to peak. Adjustable current 1.5 to 20 amps. Volt and current meters. 20Lbs. 5 x 9 x SCAN ME 04 RM-50A-BB Linear Power Supply with Battery Back Up 50 Amps. Input 115 AC to output 13.8 DC. 19 x 5.25 x 12.5 inches.

11 8 ICT provides DC power conversion products for the land mobile radio, fixed wireless broadband, small cell and industrial DC power markets. ICT has a reputation for hard wearing products with serious reliability even in the harshest Canadian setting. ICT A Comm Series Switching Power Supply These units are designed for a variety of radio applications. The unit is compact and sized to standard radio dimensions. Noise-free. High efficiency MOSFET design. Fuse protection. Terminal block output connector. 01 SCAN ME ICT A Converter Input voltage voltage. Output voltage 13.8 volts. Peak output 15A. Size: 9.48 x 4.06 x 1.77 Weight 1.84 lbs ICT A Converter Input voltage Output voltage 13.8 volts. Peak output current 10A. Size: 9.48 x 4.06 x Weight 1.69 lbs. 04 ICT180S amp peak system. 12 fused output positions. Form C alarm contracts. Front mounted fuses. Fuse status led. Up to 30 days of data-logging.

12 9 Samlex is known for innovative product design, strict quality control, as well as responsible before and after sales service. Thus providing customers with superior power conversion products at extremely competitive prices. 01 SEC Amp Switching Power Supply This unit is a high efficiency AC-DC power converter, designed specifically for land mobile. Advanced switch mode design. Mount in almost any location. Input: AC 120 V, 60 Hz Output: DC 13.8 V, 23 A SEC Amp Switching Power Supply This unit supplies clean and reliable power which is highly filtered to suppress RFI. Input voltage can be set at 120VAC or 240VAC. Input: AC 120 V, 60 Hz Output: DC 13.8 V, 10 A SCAN ME Base Station Cover for Kenwood Used with TK7180/8180, TK7160(H)/8160H. 5.5 x 7.3 x 8.7 inches. 2 Lbs. SDC-12 24VDC-12VDC Converter This is a switch mode step down DC-DC converter. Input: 24 VDC Output: 12 VDC at 12 A Non-isolated. Reverse polarity. 04 SDC Advanced switch mode design. Mount in almost any location. Compact and light weight. Reverse polarity protection. High efficiency. Cycle by cycle current limiting circuit.

13 F-7-DNN UHF Connector (U-505) UHF Male Crimp. Delrin Insulation. Nickel plated body. TCC Cable Group F T-3-TGS N Connector (N SI) Male Crimp. Teflon Insulation. Gold Pin & Silver plated Body. For Cable Group T DGN Adapter Mating End 1 FME Male. Mating End 2 UHF Male. Delrin Insulation. Gold Plated Pin. Nickel Plated Body F-DGN Mini UHF (U-600-1) Male connector. Gold plated pin. Nickel plated body. TCC Cable group F. SCAN ME

14 11 Mobilizer is our in-house brand. We manufacture quality generics to save you money! Mobilizer merges the concepts of practicality and cost effectiveness. As a result, it is one of our best selling product lines! 01 NVA148D MHz. 1/2 wave wideband. 2 db. Includes whip. AT-1071 NMO Cable Sealed. 17 RG 58/U. NC connector GL318AU-PL Mag Mount GL318U-PL Mag Mount in diameter. Chrome NMO. 17 feet of RG58/AU. PL259 end connector. 3.5 in diameter. Chrome NMO. 17 feet of RG58/U PL259 end connector F-5-DGN FME Connector 05 Female Crimp. For RG58. SCAN ME

15 12 01 BMCX650M14PC Wireless Booster Kit This device is designed for multiple users and multiple devices. It is constructed of cast aluminum for longevity. 50dB, 6 band. 4G LTE Signal. Includes 14 mag mount antenna & CLA charger for cigarette port. BMC50M14PC Wireless Booster Kit This unit does not require a connection to the cell phone it is boosting. It works for cars, RV s, boats and trailers. 50dB, 2 Band. 3G, 4G. Includes 14 mag mount antenna & CLA charger for cigarette port BT30M14UA Booster Kit with Cradle. 30dB, 2 band. 14 mag mount antenna & CLA charger for cigarette port. 04 ADCR100 MCT Connector Female crimp. For RG58 SCAN ME

16 13 Impact is a Canadian company building top of the line accessories for the communication industry. Impact products are affordable, reliable alternatives to those sold by radio producers. Further, Impact fills gaps left by manufacturers. Impact products are totally customizable to the radio you are using! Simply change the ending number to specify your radio brand. Impact also has an amazing warranty program 2 years on all gold level, 3 years on all platinum! 01 AC-1 Universal Desktop Charger Rapid Rate. Quad-Chemistry. Tough poly carbon casing. LED charging/charged indicator. 110/240V self switching power supply for international use. Wide range of adapter cups available for most portable models. Two year warranty. SCAN ME silver gold platinum SRSM-MD1 Medium Duty Speaker Mic Small form fit. 360 degree swivel. Standard 3.5mm port. GRSM-HD1 Medium Duty Speaker Mic Heavy Kevlar coil cable. Splash proof. 3.5mm accessory jack. Two year warranty. PRSM-HD3 Speaker Mic Professional grade. Environmental PU cable. Heavy duty strain relief. Wind, water, impact & dust resistant. Three year warranty.

17 14 SCAN ME BT-M00J Bluetooth for Icom Mobiles BT-M01J Bluetooth for Kenwood Mobiles 03 BTH-700/800/900 Bluetooth Dual Muff Headset Wireless headset available in 3 configurations: 800 over the head, 700 helmet clip in, 900 behind the head. Range of 10 meters 12 hrs. of talk time, 50 hrs. standby. Waterproof buttons provide cellphone and radio ptt, volume control and power switch. Battery charger and cord included. 04 BT-530 Bluetooth Adaptor for Icom Portables Fits all Icom radios with twopin connector. Internal battery 330mAh. Talk Time: 14 hours. BT-501 Bluetooth Adaptor for Kenwood Portables 05 Fits all Kenwood two-pin radios. Internal battery 33mAh. Can be used with two PTT switches at the same time. Talk time: 14 hrs.

18 15 Antenna Basics Wavelength Antennas are often referred to by their relative wavelength. For example, a 1/2 wave is half the size of the respective wave the antenna is used for. A 1/4 wave is a quarter the size of the wavelength. Impedance Impedance of the radio, antenna and coax should match (generally this is 50 Ohms). VSWR Voltage Standing Wave Ratio demonstrates the quality of the impedance match for the antenna. Simply, it measures how much of the signal bounces back from the antenna (thus wasting power). Gain Gain represents how well an antenna converts input power into radio waves in a particular direction. This is a logarithmic measure. Thus, 6 db is double the power of 3 db. Antenna Patterns Omnidirectional The antenna sends and receives signal from all directions. These antennas use different gains for varying terrain. For example, 0dB radiates up, thus making it useful for higher sites. 3dB is good for city settings. 5dB radiates out to the sides, thus making it better for open area. Directional The antenna focuses energy in a single direction. Field Tunable An antenna that is field tunable generally involves either: 2 elements that can slide or telescope to a particular length, or the metal whip can be cut to a specified frequency length. Whips that are intended to be cut will have a cutting chart that outlines the lengths required for particular frequencies.

19 16 Yagi Yagi's are directional antennas with multiple elements protruding from a central boom. The side elements are not connected to the transmitter or receiver. This style obtains a significant increase in directionality and gain. Loading Coal Loading is the placing of a loading coil at the base of an antenna. This allows the antenna to be shorter than usually required for a given frequency. Collinear Antenna A collinear antenna array is a series of dipole antennas along a common line (see right). Generally these are high gain omnidirectional antennas. This style of antenna is used for base stations or public services. Low Profile Antenna This antenna design decreases the height of an antenna. This is achieved either by placing the antenna lengthwise, or by coiling the antenna. Dipole This antenna (generally a 1/2 wave) is split at the center for a feed line to give or take power. NMO NMO stands for New Motorola. This is used for installing an antenna on a fixed structure like a vehicle. These mounts are generally truck lid, magnet or through-hole which is the most rugged.

20 17 Connector Basics FME Connectors A miniature 50 Ohm connector for DC to 2000MHZ, used with RG58 or other coaxial cables. N Connectors A threaded, weatherproof, medium sized RF connector used to join coaxial cables. This was one of the early connectors carrying microwave signals. N stands for Paul Neill, the inventor. BNC Connectors A miniature quick connect and disconnect RF connector used for coaxial cable. It has two bayonet lugs on the female connector. These bayonet lugs can wear down over time. These connectors are generally used for antennas, base stations, radios, satellite communications and medical equipment. TNC Connectors A threaded version of the BNC connector. TNC connectors best operate in the 0-11 GHz frequency. TNC also includes a variation that reverses the polarity of the interface. SMA Connectors Subminiature Version A interface connector for coax and screwtype coupling mechanisms. This connector was created for use between DC to 18GHz, but is generally used for antennas (WIFI).

21 18 UHF Connectors A connector developed for use in systems from 0.6 to 300 MHz. These connectors are popular because they are easy to use. The termination is screw on and requires no special tools. Mini UHF Connectors A miniature UHF connector. These connectors are designed for scenarios where size is critical. These are most useful for applications up to 2.5 GHz. Mini UHF use RG-58, RG-58A/B/C cable. Male vs. Female Male connectors (left) generally have a center pin or similar item. Female connectors (right) are designed to fit the pin of the male connector. For those connectors that thread, the male will have the threads on the inside edge, the female will have the thread on the outside.

22 19 Coaxial Cable Basics Generic Cable Generic coax consists of 4 layers a plastic jacket, a metal shield, insulator and a center core. Shielding The more shielding a cable has, the less interference that occurs. Shielding makes the cable stiffer and more difficult to work with. Unshielded Twisted Pair This consists of twisted pairs (generally 4) in PVC or plenum jacket. Foiled Twisted Pair This consists of twisted pairs with foil shield surrounding all pairs. Shielded Twisted Pair This consists of twisted pairs which are shielded individually, reducing noise and interference. Screened Foiled Twisted Pair This consists of twisted pairs which are shielded with braiding and foil. Screened Shielded Twisted Pair This consists of twisted pairs which are shielded individually by foil, and collectively by braiding.

23 20 Solid vs. Stranded RG-58 Cable Groups Common Cable Types RG-58 is one of the most common coaxial cables used for RF applications. This cable has a impedance of ohms. General characteristics include: 5mm diameter, 37g per meter, max potential of 300V. This cable has higher losses, but is small enough to use in a vehicle application. This cable is generally used when less than 100ft will be employed in the task. LMR 400 Solid vs. Stranded Solid (U) wire has a single center piece of metal. Stranded (AU), conversely, has many small pieces of wire making up the center core. Stranded is more flexible and can take more abuse. Solid is easier to work with to attach connectors, and has less loss. LMR400 is used for a variety of radio applications, ranging from Ham to commercial including GPS, LMR, WLAN, WISP, SCADA, mobile antennas. End connectors are generally TNC, SMA, N, BNC and 7-16 DIN. The low loss characteristics of this cable make it best suited for base station or long distance cable runs. The cable is larger than RG58 and rigid. Thus, it is not for use in a vehicle application. Note: the part number of LMR represents the diameter of the cable. LMR 400 is.405 of an inch. Cable Groups Cable groups are similar cables with slightly different properties. These cables can use the same connectors. Connectors within the same cable group can be terminated with any cable type within the family. Example: Cable Group C contains RG-58, RG-58A, and RG-58C.

24 762 Mt. Paul Way, Kamloops, BC, V2H 1B5 mobiletrends.ca