Level Plus. CHAMBERED Data Sheet. Magnetostrictive Liquid Level Transmitters with Temposonics Technology

Transcription

1 Level Plus Magnetostrictive Liquid Level Transmitters with Temposonics Technology CHAMBERED Designed for Magnetic Level Gauge (MLG) No Scheduled Maintenance or Recalibration Hazardous Area Certified

2 MEASURING TECHNOLOGY Position magnet (Magnetic field) The absolute, linear position sensors provided by MTS Sensors rely on the company s proprietary Temposonics magnetostrictive technology, which can determine position with a high level of precision and robust ness. Each Temposonics position sensor consists of a ferromagnetic waveguide, a position magnet, a strain pulse converter and supporting electronics. The magnet, connected to the object in motion in the ap plication, generates a magnetic field at its location on the waveguide. A short current pulse is applied to the waveguide. This creates a momen tary radial magnetic field and torsional strain on the waveguide. The momentary interaction of the magnetic fields releases a torsional strain pulse that propagates the length of the waveguide. When the ultrasonic wave reaches the end of the waveguide it is converted into an electri cal signal. Since the speed of the ultrasonic wave in the waveguide is precisely known, the time required to receive the return signal can be converted into a linear position measurement with both high accuracy and repeatability. Measurement cycle 1 Current pulse generates magnetic field Torsional strain pulse converter Interaction with position magnet field generates torsional strain pulse Torsional strain pulse propagates 4 Sensing element (Waveguide) Strain pulse detected by converter CHAMBERED The Level Plus CHAMBERED liquid level transmitter satisfies the demand for an accurate and robust liquid-level sensor with unsurpassed flexibility to meet most process application conditions. The CHAMBERED transmitter provides external measurement of most Magnetic Level Gauges (MLG) from popular suppliers. Once the transmitter is installed and calibrated there is no requirement for scheduled maintenance or recalibration. Set it and forget it! Features: No Scheduled Maintenance or Recalibration Integral Display Intrinsically Safe Explosion Proof / Flame Proof Applications: Magnetic Level Gauge Bypass Chamber Markets: Petroleum and Petrochemical Chemical Power Generation Compatible with: Houdec Hawk Bliss Anand Jerguson Kenco Wika Quest-tec Penberthy Klinger ISE Magtech ABB (K-tek) Bonetti SOR Krohne Nihon Klingage IOXC KSR Kurbler PLT 5 Time-of-flight converted into distance Fig. 1: Time-of-flight based magnetostrictive position sensing principle FM 10 ISA :014 C. No. 157 C. No :014 EN :01 IEC :011 FM 15 ISA C. No. 0 C. No EN 007-1:014 IEC 007-1:011 Rating Class I, Div. 1, Groups A, B, C, D T4 Class I, Zone 0/1, AEx ia IIC T4 Ta= -50 to 71 C: IP5 Class I, Div. 1, Groups A, B, C, D T4 Class I, Zone 0/1, Ex ia IIC T4 Ta= -50 to 71 C: IP5 FM14ATEX008X II 1/ G Ex ia IIC T4 Ta= -50 to 71 C: IP5 IECEx FMG 14.00X II 1/ G Ex ia IIC T4 Ga/Gb Ta= -50 to 71 C: IP5 Class I, Div. 1, Groups A, B, C, D T T Class I, Zone 0/1, AEx db IIB+H T T Ga/Gb Ta= -40 to 71 C: IP5 Class I, Div. 1, Groups B, C, D T...T Ex db IIB+H T T Ga/Gb Ta= -40 to 71 C: IP5 FM1ATEX008X II 1/ G Ex db IIB+H T T Ga/Gb Ta= -40 to 71 C: IP5 IECEx FMG 1.00X Ex db IIB+H T T Ga/Gb Ta= -40 to 71 C: IP5

3 TECHNICAL DATA Level Output Measured variable Product level Output signal /Protocol Modbus RTU, DDA, Analog (4-0 ma), HART Order length Inherent Accuracy Repeatability Electronics Input voltage Fail safe Reverse polarity protection Rigid Pipe: mm (1 144 in.) (Order length equals the measurement range plus the inactive zone. Contact factory for longer lengths) ±1 mm (0.0 in.) 0.001% F.S. or 0.81 mm (0.015 in.) whichever is greater (any direction) 10.5 to 8 Vdc High, Full scale (Modbus, DDA) Low,.5 ma default or High,.8 ma (Analog, HART ) Series diode EMC EN 1-1, EN 1--, EN 1--, EN , EN , EN , EN , EN , EN , EN , EN Environmental Enclosure rating Humidity Operating temperatures Materials Field Installation Housing dimensions Wiring Connections Electrical Connections Single and Dual Cavity NEMA Type 4X Display Measured variables NEMA Type 4X, IP5 0 to 100% relative humidity, non-condensing Electronics: C ( F) Sensing element: C ( F) (Contact factory for specific temperature ranges) 1L stainless steel, Epoxy coated aluminum Single cavity: 145 mm (5.7 in.) W x by 17 mm (5 in.) D x 10 mm (4. in.) H Dual cavity: 117 mm (4. in.) W x by 17 mm (5 in.) D x 0 mm (8.1 in.) H Stainless steel single cavity: 178 mm (7.1 in.) W x by 15 mm (5. in.) D x 15 mm ( in.) H 4-wire shielded cable or twisted pair, Daniel Woodhead -pin male connector, 4570 mm (180 in.) integral cable with pigtail ¾ in. FNPT conduit opening, M0 for ATEX/IECEx version ½ in. FNPT conduit opening Product level

4 Level Plus Level Plus Level Plus CHAMBERED TECHNICAL DRAWING 17 mm (5 in.) 145 mm (5.7 in.) 155 mm (.1 in.) Protection Method I or X 15 mm (7.7 in.) Protection Method F 145 mm (5.7 in.) 114 mm (4.5 in.) 17 mm (5 in.) ft. 1 ft 0 Inactive Zone 54 mm (.1 in.) Inactive Zone 74 mm (. in.) Measuring Range Order length 4 ma or 0 ma Order Length 4 ma or 0 ma 74 mm (. in.) ft. 1 ft 0 74 mm (. in.) 54 mm (.1 in.) 4 ma or 0 ma Order Length 4 ma or 0 ma 74 mm (. in.) Fig. : CHAMBERED mounting, bottom flange Fig. : CHAMBERED mounting, top and bottom flange TRANSMITTER INACTIVE ZONE REFERENCE Length Inactive Zone <. m (1 ft.) 74 mm (. in.) Controlling design dimensions are in millimeters and measurements in ( ) are in inches */ The ambient temperature rating, Ta= -50 C (-58 F) to 71 C (10 F), must not be exceeded due to the mounting of the level transmitter to the MLG and exposure to the process temperature. 4

5 ORDER CODE L P C a b c d e f g h i j k l m n o p a Sensor model L P C CHAMBERED Level Transmitter b Output M Modbus D DDA 1 Loop with HART 1 Loop with HART and SIL c Housing type D Single cavity with display E Dual cavity with display L Stainless steel single cavity w/display d Electronics mounting 0 bend housing top left 4 0 bend housing top right 5 0 bend housing bottom left 0 bend housing bottom right 7 Top mount 8 Bottom mount e Sensor pipe B 5/8" OD Pipe R ½" OD Pipe B 10 mm OD Pipe f Materials of construction (Wetted parts)* 1 1L stainless steel g Process connection type X None h Process connection size X None i Number of Digital Thermometers (DT s) 0 None j Digital Thermometer placement X None k B C E F I K N T P X l Protection method F Explosion proof / Flameproof (only for housing type D, E, or L) I X m A B C D Intrinsically Safe No approval Gas group Group A (not available with C = CEC (FMC) notified body and F = Flameproof/Explosion proof protection method) 1 IIA IIB Group B Group C Group D IIC (Instrinsically Safe only) 4 IIB + H X n M U o Notified body INMETRO CEC (FMC) ATEX NEC (FM) IEC KC NEPSI CML/TIIS CCOE None None Unit of measure Metric - Millimeters US customary - Inches Length (no decimal spaces) X X X X X Rigid sensor pipe: mm (code as 0005 to 058) X X X X X Rigid sensor pipe: in. (code as 0100 to 14400) */ Note: Contact factory for other materials 5

6 L P C a b c d e f g h i j k l m n o p p S Special product NOTICE Accessories such as floats, cables, and remote displays have to be ordered separately. All accessories are shown in the Accessories Catalog (55110).

7 UNITED STATES MTS Systems Corporation Sensors Division 001 Sheldon Drive Cary, N.C. 751 Phone: info.us@mtssensors.com Document Part Number: 5517 Revision D (EN) 11/018 GERMANY MTS Sensor Technologie GmbH & Co. KG ITALY Auf dem Schüffel 5851 Lüdenscheid Phone: info.de@mtssensors.com Phone: info.it@mtssensors.com Safety Integrity Level IEC 1508 FRANCE Phone: info.fr@mtssensors.com GREAT BRITAIN Phone: info.uk@mtssensors.com CHINA Phone: info.cn@mtssensors.com JAPAN Phone: info.jp@mtssensors.com MTS, Temposonics and Level Plus are registered trademarks of MTS Systems Corporation in the United States; MTS SENSORS and the MTS SENSORS logo are trademarks of MTS Systems Corporation within the United States. These trademarks may be protected in other countries. All other trademarks are the property of their respective owners. Copyright 018 MTS Systems Corporation. No license of any intellectual property rights is granted. MTS reserves the right to change the information within this document, change product designs, or withdraw products from availability for purchase without notice. Typographic and graphics errors or omissions are unintentional and subject to correction. Visit for the latest product information.