TEST & MEASURING INSTRUMENT CATALOG

Transcription

1 TEST & MEASURING INSTRUMENT CATALOG

2 INDEX High Voltage Programmable Switching DC Power Supply W~900W Programmable Switching DC Power Supply Multiple Output Dual Range Switching DC Power Supply W Single Output Switching DC Power Supply W~600W Programmable DC Electronic Load W~375W Single Output Programmable DC Power Supply W~315W Multi-Channel Programmable DC Power Supply W~315W Triple Output Linear DC Power Supply W~300W Dual Output Linear DC Power Supply W~300W Single Output Linear DC Power Supply W~100KW AC Power Source MHz~60MHz Arbitrary Waveform Function Generator MHz~20MHz Arbitrary Waveform DDS Function Generator MHz~60MHz Low-Cost DDS Function Generator KHz~200KHz LCR Meter Standby Power Meter with Data Logger All-in-One Universal System MHz~10MHz Sweep Function Generator GHz~3.7GHz Universal/Frequency Counter True RMS Bench Digital Multimeter Handheld Digital Multimeter Digital Storage Oscilloscope Analog Oscilloscope FM/AM Signal Generator

3 Volume 09. Jan, NEW PRODUCTS 25MHz~60MHz ARBITRARY WAVEFORM FUNCTION GENERATOR 1μHz~25MHz/40MHz/60MHz frequency 2 independent output channels 4.5-inch TFT LCD display Sampling rate 150MSa/s, vertical resolution 14 bits and waveform length of 16k points 6 standard waveforms, 50 built-in waveforms and 12 user-defined arbitrary waveforms AM, DSSC AM, FM, PM, ASK, FSK & BPSK RS232, USB device and USB Host 5MHz~60MHz LOW COST DDS FUNCTION GENERATOR MODEL OUTPUT SAMPLING WAVEFORM Frequency FREQUENCY RATE LENGTH Counter RS232C & USB DFG μHz~5MHz option DFG μHz~10MHz 100MSa/s 1024 points option DFG μHz~20MHz 200MHz option DFG μHz~40MHz Standard 180MSa/s points DFG μHz~60MHz Standard 2 output channels 32 built-in waveforms 40 sets save & recall for panel settings Modulations: FM, AM, FSK, ASK, PSK Frequency sweep, amplitude sweep, burst, and TTL output functions CHA & CHB ADD output (DFG-2040 &2060) 10KHz ~ 200KHz LCR METER PROGRAMMABLE SWITCHING DC POWER SUPPLY 32-bit core processor 5-digit 4.3-inch TFT LCD display 100 sets memories for internal & 500 memories for U disk storage/save Support FAT16 and FAT32 files Max. rated output 600W and 2400W Constant voltage and constant current operations and auto CV/CC switch OVP, OCP, OTP, OLP and UVP RS232, RS485 and RS422

4 600W & 1200W PROGRAMMABLE SWITCHING DC POWER SUPPLY PCH Series The PCH series are high power output Switching DC power supply with rated power of 600W and 1200W. The PCH series adopts ZVZCS PWM technology, which greatly reduces switching consumption and therefore facilitates switching function with high efficiency and high stability. The PCH series are built into a 2U 19 inch standard chassis. The maximum rated voltage is from +1000V to +12KV. There is option for negative output from 1000V to 12KV. RS232, RS485 and RS422 communication interfaces are made as standard part for PCH series, providing multiple communication choices for digital control. Features Program debugging function by PC Max. rated output 600W and 1200W Max. rated voltage from +1000V to +12KV Option for negative output from -1000V to -12KV Constant voltage and constant current operations, auto CV/CC switch Built into 2U 19-inch standard chassis 4 1/2 digits LED display for voltage and current Thermostatic control fan, low noise Adopting ZVZCS PWM technology, high efficiency and high stability Low ripple, high stability Front panel operation: preset voltage and current, output ON/OFF Multiple protections: OVP, OCP, OTP, OLP and UVP Multiple programming interfaces: RS232, RS485 and RS422 Support ModBus-RTU commands 1

5 Technical Specification PCH Series Model PCH600-10H PCH600-12H PCH600-15H PCH600-20H PCH600-30H PCH600-40H PCH600-50H PCH600-10HN PCH600-12HN PCH600-15HN PCH600-20HN PCH600-30HN PCH600-40HN PCH600-50HN Output Rated output Load regulation Line regulation Ripple & Noise Programming resolution Display resolution Display accuracy Programming Interface Commands Protection Over Voltage Protection (O.V.P.) Over Current Protection (O.C.P.) Over Temperature Protection (O.T.P.) Under Voltage Protection (U.V.P.) General Cooling method Operating environment Storage environment Pow er source Weight Dimensions Voltage 0~1000V 0~1200V 0~1500V 0~2000V 200~3000V 200~4000V 300~5000V -100~-1000V -120~-1200V -150~-1500V -200~-2000V -300~-3000V -400~-4000V -500~-5000V Current 0~600mA 0~500mA 0~400mA 0~300mA 0~200mA 0~150mA 0~120mA OVP 0~1050V 100~1260V 100~1575V 200~2100V 200~3150V 200~4200V 300~5250V 0~-1050V -100~-1260V -100~-1575V -200~-2100V -300~-3150V -400~-4200V -500~-5250V CV 0.5%+2LSB, CC 0.5%+2LSB CV 0.1%+2LSB, CC 0.1%+2LSB 0.05% FS 0.05% FS 0.05% FS 0.1% FS 0.1% FS 0.1% FS 0.1% FS Voltage 1V 1V 1V 1V 1V 1V 1V Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA OVP 1V 1V 1V 1V 1V 1V 1V Voltage 1V 1V 1V 1V 1V 1V 1V Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA Voltage 0.2%+2LSB, Current 0.5%+2LSB RS232, RS485 and RS422 ModBus-RTU Built-in OVP protection w ith limit of 105% rated output voltage. The output w ill be shut dow n w hen OVP is activated. Over load, short circuit and output current limit Built-in OTP protection w ith heat sink temperature limit of 50 ±5%. The output w ill be shut dow n w hen OTP is activated. Built-in UVP protection w ith limit of 165Vac. The output w ill be shut dow n the UVP is activated. Cooling fan 0 ~40, 10%~80%RH -20 ~70, 10%~90%RH AC220V±10%, 47~63Hz 11~14kg 482Wx88Hx460D mm 2

6 PCH Series Model PCH600-60H PCH600-80H PCH H PCH H PCH H PCH H PCH600-60HN PCH600-80HN PCH HN PCH HN PCH HN PCH HN Output Voltage 600~6000V 800~8000V 1000~10000V 1200~12000V 0~1000V 0~1200V -600~-6000V -800~-8000V -800~-10000V -1200~-12000V -100~-1000V -120~-1200V Rated output Current 0~100mA 0~75mA 0~60mA 0~50mA 0~1.2A 0~1A OVP 600~6120V 800~8400V 1000~10500V 1200~12600V 0~1050V 0~1260V -500~-6120V -800~-8400V -1000~-10500V -1200~-12600V -100~-1050V -120~-1260V Load regulation Line regulation Ripple & Noise Programming resolution Display resolution CV 0.5%+2LSB, CC 0.5%+2LSB CV 0.1%+2LSB, CC 0.1%+2LSB 0.1% FS 0.1% FS 0.1% FS 0.1% FS 0.1% FS 0.1% FS Voltage 1V 1V 1V 1V 1V 1V Current 0.1mA 0. 01mA 0. 01mA 0. 01mA 1mA 1mA OVP 1V 1V 1V 1V 1V 1V Voltage 1V 1V 1V 1V 1V 1V Current 0.1mA 0.01mA 0.01mA 0.01mA 1mA 1mA Display accuracy Voltage 0.2%+2LSB, Current 0.5%+2LSB Programming Interface Commands RS232, RS485 and RS422 ModBus-RTU Protection Over Voltage Protection (O.V.P.) Over Current Protection (O.C.P.) Over Temperature Protection (O.T.P.) Under Voltage Protection (U.V.P.) Built-in OVP protection w ith limit of 105% rated output voltage. The output w ill be shut dow n w hen OVP is activated. Over load, short circuit and output current limit Built-in OTP protection w ith heat sink temperature limit of 50 ±5%. The output w ill be shut dow n w hen OTP is activated. Built-in UVP protection w ith limit of 165Vac. The output w ill be shut dow n the UVP is activated. General Cooling method Operating environment Storage environment Pow er source Weight Dimensions Cooling fan 0 ~40, 10%~80%RH -20 ~70, 10%~90%RH AC220V±10%, 47~63Hz 11~14kg 482Wx88Hx460D mm 3

7 PCH Series Model PCH H PCH H PCH H PCH H PCH H PCH H PCH HN PCH HN PCH HN PCH HN PCH HN PCH HN Output Voltage 0~1500V 0~2000V 300~3000V 400~4000V 500~5000V 600~6000V -150~-1500V -200~-2000V -300~-3000V -400~-4000V -500~-5000V -600~-6000V Rated output Load regulation Line regulation Ripple & Noise Programming resolution Display resolution Display accuracy Programming Interface Commands Protection Current 0~800mA 0~600mA 0~400mA 0~300mA 0~240mA 0~200mA 100~1575V 200~2100V 300~3150V 400~4200V 500~5250V 600~6120V OVP -100~-1575V -200~-2100V -300~-3150V -400~-4200V -500~-5250V -600~-6120V CV 0.5%+2LSB, CC 0.5%+2LSB CV 0.1%+2LSB, CC 0.1%+2LSB 0.1% FS 0.1% FS 0.1% FS 0.1% FS 0.1% FS 0.1% FS Voltage 1V 1V 1V 1V 1V 1V Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA OVP 1V 1V 1V 1V 1V 1V Voltage 1V 1V 1V 1V 1V 1V Current 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA 0.1mA Voltage 0.2%+2LSB, Current 0.5%+2LSB RS232, RS485 and RS422 ModBus RTU Over Voltage Protection (O.V.P.) Built in OVP protection with limit of 105% rated output voltage. The output will be shut down when OVP is activated. Over Current Protection (O.C.P.) Over load, short circuit and output current limit Over Temperature Protection (O.T.P.) Under Voltage Protection (U.V.P.) General Cooling method Operating environment Storage environment Power source Weight Built in OTP protection with heat sink temperature limit of 50 ±5%. The output will be shut down when OTP is activated. Built in UVP protection with limit of 165Vac. The output will be shut down the UVP is activated. Cooling fan 0 ~40, 10%~80%RH 20 ~70, 10%~90%RH AC220V±10%, 47~63Hz 11~14kg Dimensions 482Wx88Hx460D mm Specifications are subject to change without prior notice. 4

8 1200W & 2400W PROGRAMMABLE SWITCHING DC POWER SUPPLY PCL Series The PCL series are high power output Switching DC power supply with rated power of 1200W and 2400W. The PCL series adopts ZVZCS PWM technology, which greatly reduces switching consumption and therefore facilitates switching function with high efficiency and high stability. The PCL series are built into a 2U 19 inch standard chassis. The maximum rated voltage is from 6V to 600V and the maximum rated current is from 2A to 200A. RS232, RS485 and RS422 communication interfaces are made as standard part for PCL series, providing multiple communication choices for digital control. For max. current <100A For max. current 100A Features Max. rated output 1200W and 2400W Max. rated voltage from 6V to 600V, max. rated current from 2A to 200A Constant voltage and constant current operations, auto CV/CC switch Built into 2U 19-inch standard chassis 4 1/2 digits LED display for voltage and current Thermostatic control fan, low noise Adopting ZVZCS PWM technology, high efficiency and high stability Low ripple and high stability Front panel operation: preset voltage and current, output ON/OFF Multiple protections: OVP, OCP, OTP, OLP and UVP Multiple programming interfaces: RS232, RS485 and RS422 Support ModBus-RTU commands 5

9 Technical Specification PCL Series Model PCL PCL PCL PCL PCL PCL1200-1H Output Voltage 0~6V 0~12V 0~15V 0~30V 0~60V 0~100V Rated output Load regulation Line regulation Ripple & Noise Programming resolution Display resolution Display accuracy Current 0~200A 0~100A 0~80A 0~40A 0~20A 0~12A OVP 0~6.3V 0~12.6V 0~15.75V 0~31.5V 0~63V 0~105V CV 0.2%+2LSB, CV 0.1%+2LSB, CC 0.1%+2LSB CC 0.2%+2LSB CV 0.1%+2LSB, CC 0.1%+2LSB 50mV 50mV 50mV 50mV 50mV 100mV OVP 0.001V 0.01V 0.01V 0.01V 0.01V 0.1V Voltage 0.001V 0.01V 0.01V 0.01V 0.01V 0.1V Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A Voltage 0.001V 0.01V 0.01V 0.01V 0.01V 0.1V Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A Voltage 0.2%+2LSB, Current 0.5%+2LSB Programming Interface Commands RS232, RS485 and RS422 ModBus-RTU Protection Over Voltage Protection (O.V.P.) Over Current Protection (O.C.P.) Over Temperature Protection (O.T.P.) Under Voltage Protection (U.V.P.) Built-in OVP protection with limit of 105% rated output voltage. The output will be shut down when OVP is activated. Over load, short circuit and output current limit Built-in OTP protection with heat sink temperature limit of 50 ±5%. The output will be shut down when OTP is activated. Built-in UVP protection with limit of 165Vac. The output will be shut down the UVP is activated. General Cooling method Operating environment Storage environment Power source Weight Dimensions Cooling fan 0 ~40, 10%~80%RH -20 ~70, 10%~90%RH AC220V±10%, 47~63Hz 11~14kg 482Wx88Hx460D mm 6

10 PCL Series Model PCL PCL1200-2H PCL1200-3H PCL PCL1200-5H PCL1200-6H Output Voltage 0~150V 0~200V 0~300V 0~400V 0~500V 0~600V Rated output Current 0~8A 0~6A 0~4A 0~3A 0~2.4A 0~2A OVP 0~157.5V 0~210V 0~315V 0~420V 0~525V 0~630V Load regulation Line regulation Ripple & Noise CV 0.1%+2LSB, CC 0.1%+2LSB CV 0.1%+2LSB, CC 0.1%+2LSB 100mV 100mV 100mV 100mV 200mV 200mV Programmin g resolution Display resolution OVP 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V Current 0.001A 0.001A 0.001A 0.001A 0.001A 0.001A Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V Current 0.001A 0.001A 0.001A 0.001A 0.001A 0.001A Display accuracy Voltage 0.2%+2LSB, Current 0.5%+2LSB Programming Interface Commands RS232, RS485 and RS422 ModBus-RTU Protection Over Voltage Protection (O.V.P.) Over Current Protection (O.C.P.) Over Temperature Protection (O.T.P.) Under Voltage Protection (U.V.P.) Built-in OVP protection with limit of 105% rated output voltage. The output will be shut down when OVP is activated. Over load, short circuit and output current limit Built-in OTP protection with heat sink temperature limit of 50 ±5%. The output will be shut down when OTP is activated. Built-in UVP protection with limit of 165Vac. The output will be shut down the UVP is activated. General Cooling method Operating environment Storage environment Power source Weight Dimensions Cooling fan 0 ~40, 10%~80%RH -20 ~70, 10%~90%RH AC220V±10%, 47~63Hz 11~14kg 482Wx88Hx460D mm 7

11 PCL Series Model PCL PCL PCL PCL PCL PCL2400-1H Output Rated output Voltage 0~12V 0~20V 0~30V 0~40V 0~60V 0~100V Current 0~200A 0~120A 0~80A 0~60A 0~40A 0~24A OVP 0~12.6V 0~21V 0~31.5V 0~42V 0~63V 0~105V Load regulation Line regulation Ripple & Noise CV 0.1%+2LSB, CC 0.1%+2LSB CV 0.1%+2LSB, CC 0.1%+2LSB 100mV 100mV 100mV 100mV 100mV 100mV Programmi ng resolution Display resolution OVP 0.01V 0.01V 0.01V 0.01V 0.01V 0.1V Voltage 0.01V 0.01V 0.01V 0.01V 0.01V 0.1V Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A Voltage 0.01V 0.01V 0.01V 0.01V 0.01V 0.1V Current 0.1A 0.1A 0.01A 0.01A 0.01A 0.01A Display accuracy Voltage 0.2%+2LSB, Current 0.5%+2LSB Programming Interface Commands RS232, RS485 and RS422 ModBus-RTU Protection Over Voltage Protection (O.V.P.) Built-in OVP protection with limit of 105% rated output voltage. The output will be shut down when OVP is activated. Over Current Protection (O.C.P.) Over load, short circuit and output current limit Over Temperature Protection (O.T.P.) Under Voltage Protection (U.V.P.) Built-in OTP protection with heat sink temperature limit of 50 ±5%. The output will be shut down when OTP is activated. Built-in UVP protection with limit of 165Vac. The output will be shut down the UVP is activated. General Cooling method Operating environment Storage environment Power source Weight Dimensions Cooling fan 0 ~40, 10%~80%RH -20 ~70, 10%~90%RH AC220V±10%, 47~63Hz 11~14kg 482Wx88Hx460D mm 8

12 PCL Series Model PCL PCL2400-2H PCL2400-3H PCL PCL H PCL2400-6H Output Rated output Voltage 0~150V 0~200V 0~300V 0~400V 0~500V 0~600V Current 0~16A 0~12A 0~8A 0~6A 0~4.8A 0~4A OVP 0~157.5V 0~210V 0~315V 0~420V 0~525V 0~630V Load regulation Line regulation Ripple & Noise CV 0.1%+2LSB, CC 0.1%+2LSB CV 0.1%+2LSB, CC 0.1%+2LSB 100mV 100mV 200mV 200mV 200mV 200mV Programmi ng resolution Display resolution OVP 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V Current 0.01A 0.01A 0.001A 0.001A 0.001A 0.001A Voltage 0.1V 0.1V 0.1V 0.1V 0.1V 0.1V Current 0.01A 0.01A 0.001A 0.001A 0.001A 0.001A Display accuracy Voltage 0.2%+2LSB, Current 0.5%+2LSB Programming Interface Commands RS232, RS485 and RS422 ModBus-RTU Protection Over Voltage Protection (O.V.P.) Built-in OVP protection with limit of 105% rated output voltage. The output will be shut down when OVP is activated. Over Current Protection (O.C.P.) Over load, short circuit and output current limit Over Temperature Protection (O.T.P.) Under Voltage Protection (U.V.P.) Built-in OTP protection with heat sink temperature limit of 50 ±5%. The output will be shut down when OTP is activated. Built-in UVP protection with limit of 165Vac. The output will be shut down the UVP is activated. General Cooling method Operating environment Storage environment Power source Weight Dimensions Cooling fan 0 ~40, 10%~80%RH -20 ~70, 10%~90%RH AC220V±10%, 47~63Hz 11~14kg 482Wx88Hx460D mm Specifications are subject to change without prior notice. 9

13 300W~900W PROGRAMMABLE SWITCHING DC POWER SUPPLY SPC Series 300W to 900W SPC series are high accuracy programmable DC power supplies with single output. MPU control & RS 232/RS 485/USB interface make SPC series facilitate auto test and auto control. The commands of the SPC series are compliant with SCPI commands. Users can easily develop programs to facilitate different applications in auto test and auto control. Users can also store or recall data via the USB host on front panel. The 4.3 inch TFT LCD display gives full display for parameters and output waveforms. Digital input fulfilled by rotary dial and keypad input makes input to be fast and accurate. Voltage and current regulations by software avoids human error and makes the SPC series to be more accurate. MODEL VOLTAGE CURRENT SPC V 10A SPC V 60A SPC V 30A SPC V 15A Features High accuracy, high resolution Over load, over voltage, over current, over temperature and reverse polarity protections Constant voltage and constant current operations, auto CV and CC switch 4.3-inch TFT LCD display High speed rotary dial and keypad input Built-in beeper alarm Panel lock and output ON/OFF function List mode function and 100 sets save & recall for voltage Current and time setups, and easy use in auto test Remote sense function Low resistance measurement function, display load resistance value Battery charge mode Standard USB host interface for data storage and recall from external USB flash driver Standard RS-232 interface, support SCPI commands, support Labview Standard 0-5V analog control RS-232 to USB cable provided Optional RS-485 interface, support Modbus 10

14 SPC Series 11

15 Technical Specification SPC Series Model Rated output (0 ~40 ) Voltage Current O.V.P O.C.P Constant Voltage Operation Line regulation Load regulation Ripple & Noise (20Hz~20MHz) Recovery time Constant Current Operation Line regulation Load regulation Ripple & Noise Display Voltmeter Ammeter Setting resolution Reading resolution Setting accuracy Voltage (25±5 ) Current Reading accuracy Voltage (25±5 ) Current General Protection Panel lock Remote sense function Battery charge Interface Memory Insulation SPC-3010 SPC-1560 SPC-3030 SPC ~30V 0~15V 0~30V 0~60V 0~10A 0~60A 0~30A 0~15A 0.1~34V 0.1~18V 0.1~34V 0.1~64V 0.1~12A 0.1~62 A 0.1~34A 0.1~17A 0.01%+4mV 0.1%+5mV 2mVrms, 30mVpp 1.5ms (50% load change) 0.2%+3mA 0.2%+5mA 10mArms 5 digits LCD display 5 digits LCD display 1mV/1mA 1mV/1mA ±(0.03% of reading + 10mV) ±(0.3% of reading + 10mA) ±(0.02% of reading +5mV) ±(0.3% of reading +10mA) Over load, over voltage, over current, over temperature and reverse polarity protections Provided Maximum compensation voltage 0.1V@ Maximum output Lithium battery curve charge RS232 interface, Support SCPI commands 0-5V analog control RS232 to USB cable provided Optional RS485 interface, support ModBus 100 sets internal save, support save to USB flash driver Between base and terminals: 60VDC Operating environment Indoor use Altitude: 2000m Ambient temperature: 0~40 Relative humidity: 80% Installation category: II Pollution degree: 2 Storage environment -10 ~70, 70%RH Power source AC220V±10%, 50/60Hz Accessories Power cord x1, Operation manual x1, RS232 cable x1, Software CD x1 Dimension (WxHxD) 215x89x412mm Weight 4.5kg 5.5kg 5.5kg 5.5kg Specifications are subject to change without prior notice. 12

16 MULTIPLE OUTPUT DUAL RANGE SWITCHING DC POWER SUPPLY SPS 3606 SPS 3606 Switching mode DC power supply provides 375W output capacity with three independent outputs and CH1/CH2 dual range output (30V/ 6A or 60V/3A), which accommodates a wide range of applications. On the basis of fixed output capacity, it enables output voltage or current to the maximum. With high power density and high conversion efficiency, multiple protections, high reliability, low noise and compact design, SPS 3606 is completely adequate for satisfying mainstream power supply demands. Features Three independent & isolated output : CH1/ CH2 dual range output of 30V/6A or 60V/3A CH3 0.1~5V/3A, adjustable output Constant voltage and constant current operations Auto Series and Parallel tracking operations providing flexible output of 30V/12A, 60V/6A or 120V/3A High power conversion efficiency by improving the power efficiency by 25% Manual and remote ON/OFF control Manual over voltage protection Over voltage, over load, over temperature and reverse polarity protections Power source AC115V/230V auto switch Fan speed control circuit to minimize acoustic noise Compact design and light weight 13

17 Technical Specification SPS 3606 Output CH1 & CH2 CH3 Constant voltage operation Line regulation Load regulation Riple & Noise Recovery time Constant current operation Line regulation Load regulation Riple & Noise Tracking Operation Tracking error Series regulation Riple & Noise Output On/Off Response Time Voltage up(10%~90%) Voltage down(90%~10%) CH3 output Output voltage Output current Protection Over voltage protection Display Meter Protection Remote control Fan noise Temperature co-efficient Insulation Operating environment Storage environment Power source Accessories Dimension & Weight Independent mode Series mode Parallel mode 0.01%+3mV 0~30V/0~6A; 0~60V/0~3A 0~60V/0~6A; 0~120V/0~3A 0~30V/0~12A; 0~60V/0~6A 0.1~5V/3A 0.01%+5mV (rating current 6A); 0.01%+8mV (rating current 12A) 5mV rms (5Hz~1MHz); 50mVpp (20Hz~20MHz) 100us (50% load change, minimum load 0.5A) 0.2%+3mA 0.2%+3mA 3mA rms (0.5%+10mV) of the master 300mV 10mVrms (5Hz~1MHz); 100mVpp (20Hz~20MHz) 100ms ( 95% rated load) 100ms ( 10% rated load) 0.1~5V, adjustable 3A Over voltage, over load, over temperature and reverse polarity protections ±(0.5% reading+0.5v) 3 1/2 digits0.39" LED display 100mV/10mA ±(0.5% reading +2 digits) Over voltage and reverse polarity protections Output On/Off 50dB Voltage: 100ppm/ +3mV Current: 150ppm/ +3mA Between chassis & terminal: 100MΩ/1000VDC Between chassis and AC code: 100MΩ/1000VDC Ambient temperature: 0~40 Relative humidity: 80% Ambient temperature: 0 ~70 Relative humidity: 70% AC 115V/230V±15%, 50/60Hz Operation manual 1, Power cord 1, Test lead mm, 5.5Kg 14

18 360W SINGLE OUTPUT SWITCHING DC POWER SUPPLY PS 1000 Series Our Switching DC Power Supplies are the ideal DC sources for Lab, Service, Industrial or Educational applications. They are designed with an energy saving circuit for cooler, more reliable and efficient operation at all output levels. All our supplies have 'short circuit' and 'overload' protection providing "fool proof" operation for any applications. Features 3 digit red LED display of voltage and current Constant voltage and current operation Coarse and fine voltage control Short Circuit and Overload Protection Cooling Fan automatically operated by temperature High efficient Power Technical Specification MODEL Output Line Regulation Load Regulation Meter Noise & Ripple (Load Max.) Insulation Dimension Weight Power Source Accessories PS-1230 PS-1820 PS-3610 PS-6006 PS-2415 Voltage 0~12V 0~18V 0~36V 0~60V 0~24V Current 0~30A 0~20A 0~10A 0~6A 0~15A Voltage 5mV 5mV 5mV 5mV 5mV Current 3mA 3mA 3mA 3mA 3mA Voltage 5mV 5mV 5mV 5mV 5mV Current 3mA 3mA 3mA 3mA 3mA Voltage Current ±(0.5%rdg + 2 digits) ±(0.5%rdg + 2 digits) Voltage (p-p) 100mV 100mV 100mV 100mV 100mV Voltage (rms) 5mV 5mV 5mV 5mV 5mV Current (rms) 5mA 5mA 5mA 5mA 5mA Chassis to Terminal Chassis to AC input 20MΩ or above (DC 500V) 30MΩ or above (DC 500V) mm Approx. 3.5Kg 115V/230V ±10%, 50/60Hz Instruction Manual, Power Cord, Test Lead, Spare Fuse 15

19 150W~600W PROGRAMMABLE DC ELECTRONIC LOAD DCL 1000 Series The DCL 1000 series are high performance programmable DC electronic load. Four basic functions and nine basic operation modes provides sufficient solutions wherever power sources need to be tested. Especially unique CPV and CPC modes greatly improved the functionality of constant power operation. The strong List Mode function, with Min. step 10ms and Max. step 99999s, allows users to set numbers of cycles at free and to link to other lists, facilitating complicated tests. Equipped with RS 232 interface for PC control, SCPI commands and Labview development platform, the DCL 1000 series are designed to provide high reliability, great performance and easy operation in research and production of aerospace, ship building, auto electronics, solar battery, fuel cell, etc. 150W DCL W DCL W DCL-1032 Model Power Voltage Current current Model Power Voltage Current current DCL W 0~150V 1mA~30A 1.5V DCL W 0~500V 1mA~15A 3.8V DCL W 0~150V 1mA~30A 0.82V DCL W 0~150V 1mA~60A 0.9V DCL W 0~150V 1mA~60A 1.2V DCL W 0~500V 1mA~30A 4.2V Features 4 basic functions: CC, CV, CR, CP 9 basic operation modes: CCL, CCH, CVL, CVH, CRL, CRM, CRH, CPV, CPC 24-bit A/D converter, 16-bit D/A converter, 40kHz D/A conversion speed & high resolution Hardware circuit for CR function, faster transient response and higher CR accuracy High speed transient test function, max. test frequency 2kHz Over current, over voltage, over power, over temperature and reverse voltage protections 4.3-inch backlit Segment LCD display & Auto ON/OFF function High speed rotary dial and keypad input List Mode function, step 10ms-99999s, free to set numbers of cycles and to be linked Auxiliary functions: short circuit test, battery discharge capacity test Save & recall function for frequently used setups Intelligent cooling system, ensure high stability during long-time operation under full load Standard RS-232 interface, support SCPI commands, support Labview, RS232 to USB cable 16

20 Technical Specification DCL 1000 Series Model DCL-1011 DCL-1031 DCL-1032 DCL-1033 DCL-1061 DCL-1062 Rated input (0 ~40 ) Voltage 0~150V 0~150V 0~150V 0~500V 0~150V 0~500V Current 1mA~30A 1mA~30A 1mA~60A 1mA~15A 1mA~60A 1mA~30A Power *1 150W 300W 300W 300W 600W 600W MOV@FS current 1.5V 0.82V 1.2V 3.8V 0.9V 4.2V Constant voltage mode (CV) Low range 0.1~30V 0.1~30V 0.1~30V 0.1~30V 0.1~30V 0.1~30V 1mV 1mV 1mV 1mV 1mV 1mV ±(0.05%+0.02%FS) High range 0.10~150V 0.10~150V 0.10~150V 0.10~500V 0.10~150V 0.10~500V 10mV 10mV 10mV 10mV 10mV 10mV ±(0.05%+0.025%FS) Constant current mode (CC) Low range 0~3A 0~3A 0~6A 0~1.5A 0~6A 0~3A 1mA 1mA 1mA 1mA 1mA 1mA ±(0.1%+0.1%FS) High range 0~30A 0~30A 0~60A 0~15A 0~60A 0~30A 10mA 10mA 10mA 10mA 10mA 10mA ±(0.1%+0.15%FS) Constant resistance mode (CR) (Input voltage /current 10%FS) Low range (VH CRL) 0.06~6Ω 0.04~6Ω 0.025~3Ω 0.3~36Ω 0.02~3Ω 0.15~18Ω 100uΩ 100uΩ 50uΩ 600uΩ 50uΩ 300uΩ (Impedance) ±(0.5%+0.5%FS) Middle range (VH CRM) 6~600Ω 6~600Ω 3~300Ω 36~3600Ω 3~300Ω 18~1800Ω 2.7us 2.7us 5.4us 0.45us 5.4us 0.90us (Conductance) ±(1%+1%FS) High range (VH CRH) 60~4000Ω 60~4000Ω 30~4000Ω 360~4000Ω 30~4000Ω 180~4000Ω *2 0.30us 0.30us 0.20us 0.051us 0.20us 0.10us (Conductance) ±(1.5%+1.5%FS) Low range (VL CRL) 0.06~1.12Ω 0.04~1.12Ω 0.025~0.6Ω 0.3~2.4Ω 0.02~0.6Ω 0.15~1.2Ω 18uΩ 18uΩ 9.6uΩ 38uΩ 9.6uΩ 19uΩ (Impedance) ±(0.5%+0.5%FS) Medium range (VL CRM) 1.12~112Ω 1.12~112Ω 0.6~60Ω 2.4~240Ω 0.6~60Ω 1.2~120Ω 15us 15us 27us 6.8us 27us 14us (Conductance) ±(1%+1%FS) High range (VL CRH) 11.2~2000Ω 11.2~2000Ω 6.0~2000Ω 24~2000Ω 6.0~2000Ω 12~2000Ω 1.6us 1.6us 3.0us 0.78us 3.0us 1.5us (Conductance) ±(1.5%+1.5%FS) Constant power mode (CP) (Input voltage /current 10%FS) Range 0~150W 0~300W 0~300W 0~300W 0~600W 0~600W ±(1%+0.1%FS) P<100W 1mW 1mW 1mW 1mW 1mW 1mW P 100W 10mW 10mW 10mW 10mW 10mW 10mW 17

21 Model Voltage measurement Low range High range Current measurement Low range High range DCL 1000 Series DCL-1011 DCL-1031 DCL-1032 DCL-1033 DCL-1061 DCL ~30V 0~30V 0~30V 0~30V 0~30V 0~30V 1mV 1mV 1mV 1mV 1mV 1mV ±(0.05%+0.02%FS) 0~150V 0~150V 0~150V 0~500V 0~150V 0~500V 10mV 10mV 10mV 10mV 10mV 10mV ±(0.05%+0.025%FS) 0~3A 0~3A 0~6A 0~1.5A 0~6A 0~3A 1mA 1mA 1mA 1mA 1mA 1mA ±(0.1%+0.1%FS) 0~30A 0~30A 0~60A 0~15A 0~60A 0~30A 1mA 1mA 1mA 1mA 1mA 1mA ±(0.1%+0.15%FS) Power measurement (Input voltage /current 10%FS) Range 0~150W 0~300W 0~300W 0~300W 0~600W 0~600W P<100W 1mW 1mW 1mW 1mW 1mW 1mW P 100W 10mW 10mW 10mW 10mW 100mW 100mW 1%+0.1%FS Current slew rate Range CCH (/us) 0.1mA ~1.5A 0.1mA ~1.5A 0.1mA ~3A 0.1mA ~0.75A 0.1mA ~3A 0.1mA ~1.5A CCL (/us) *3 0.1mA ~0.15A 0.1mA ~0.15A 0.1mA ~0.33A 0.1mA ~0.075A 0.1mA ~0.33A 0.1mA ~0.15A 0.1mA/us 0.1mA/us 0.1mA/us 0.1mA/us 0.1mA/us 0.1mA/us *4 3%+10us Battery discharge Discharge time 1s~100h 1s~100h 1s~100h 1s~100h 1s~100h 1s~100h 1s 1s 1s 1s 1s 1s 0.2%+1s Battery capacity 3000Ah 3000Ah 6000Ah 1500Ah 6000Ah 3000Ah 1mAh 1mAh 1mAh 1mAh 1mAh 1mAh 0.3%+0.01Ah Discharge voltage range 0.1V~150V 0.1V~150V 0.1V~150V 0.1V~150V 0.1V~150V 0.1V~150V Discharge current resolution 10mA 10mA 10mA 10mA 10mA 10mA Short circuit CCL 3.6A 3.6A 7.2A 1.8A 7.2A 3.6A CCH 33A 33A 66A 16.5A 66A 33A CV 0V 0V 0V 0V 0V 0V VH CRL 0.044Ω 0.027Ω 0.022Ω 0.24Ω 0.015Ω 0.13Ω VH CRM 5.6Ω 5.6Ω 2.8Ω 31Ω 2.8Ω 16Ω VH CRH 58Ω 58Ω 29Ω 310Ω 29Ω 160Ω VL CRL 0.044Ω 0.027Ω 0.022Ω 0.24Ω 0.015Ω 0.13Ω VL CRM 1.1Ω 1.1Ω 0.53Ω 2Ω 0.53Ω 1.0Ω 18

22 DCL 1000 Series Model DCL-1011 DCL-1031 DCL-1032 DCL-1033 DCL-1061 DCL-1062 VL CRH 10Ω 10Ω 5.3Ω 20Ω 5.3Ω 10Ω CPV 165W 315W 315W 315W 630W 630W CPC 0W 0W 0W 0W 0W 0W Max. slew rate Current 1.5A /us 1.5A /us 3A /us 0.75A /us 3A /us 1.5A /us Voltage 0.2V /us 0.2V /us 0.2V /us 0.02V /us 0.2V /us 0.02V /us Open circuit 20kΩ 20kΩ 20kΩ 20kΩ 20kΩ 20kΩ Max. input level Current 33A 33A 66A 16.5A 66A 33A Voltage 175V 175V 175V 550V 175V 550V Ripple & Noise Current (rms/p-p) 3mA/30mA 3mA/30mA 6mA/60mA 5mA/50mA 6mA/60mA 5mA/50mA Voltage (rms) 5mV 5mV 5mV 5mV 5mV 5mV Transient operation Transient mode Frequency range *5 High/Low time Rising/Falling time Continuous, Pulse, Toggled 0.01Hz~2kHz 0~99999ms 250us 0.2%+10us 250us~99999ms 250us 0.2%+10us List Mode Step time No. of steps No. of cycles Storage Expanded function 10ms~99999s 10ms us 1~50 0~ Lists Chain Trigger input Trigger level Trigger pulse width TTL falling edge 20us General Protection Over current, over voltage, over power, over temperature and reverse voltage protections Interface Operating environment Storage environment Power source RS-232 interface, support SCPI commands, support Labview, RS232 to USB 0 ~40, 85%RH -10 ~70, 70%RH AC110V/220V±10% selectable, 50/60Hz Accessories Power cord x1, Operation manual x1, RS-232 cable x1, RS232C to USB cable x1 Dimension (WxHxD) 215x89x412mm 215x89x412mm 215x89x507mm Weight 5.2kg 6.7kg 9kg Specifications are subject to change without prior notice. 19

23 180W~375W SINGLE OUTPUT PROGRAMMABLE DC POWER SUPPLY PSP Series 180W to 375W PSP series are high precision programmable DC power supplies features low regulation 0.01%, low ripple and noise with 1mVrms, automatic continuous or dynamic load change, battery charge function, MPU control, RS 232/RS 485/USB interface, etc. The commands of the PSP series are compliant with SCPI commands. Users can easily develop programs to facilitate different applications in auto test and auto control. Digital input fulfilled by rotary dial and keypad makes input to be fast and accurate. Voltage and current regulations by software avoids human error and makes the PSP series to be more accurate. PSP-7505 MODEL VOLTAGE CURRENT PSP V 5A PSP V 5A PSP V 10A PSP V 5A PSP V 20A Features 0.01% low regulation, high accuracy and high resolution Over load, over voltage, over current, over temperature and reverse polarity protections Constant voltage and constant current operations, auto CV and CC switch Automatic continuous or dynamic load change 1mVrms low ripple & noise 4.3-inch backlit Segment LCD display High speed rotary dial and keypad input Built-in beeper alarm Panel lock and output ON/OFF function List mode function, 100 sets save & recall for voltage and current and time setups Remote sense function Low resistance measurement function, display load resistance value Battery charge mode Standard RS-232 interface, support SCPI commands, support Labview RS-232 to USB cable provided Optional RS-485 interface, support Modbus 20

24 Technical Specification PSP Series Model PSP-3605 PSP-6005 PSP-3010 PSP-7505 PSP-1820 Rated output (0 ~40 ) Output Output O.V.P O.C.P 0~36V 0~60V 0~30V 0~75V 0~18V 0~5A 0~5A 0~10A 0~5A 0~20A 0.1~40V 0.1~64V 0.1~34V 0.1~80V 0.1~21V 0.1~5.5A 0.1~5.5A 0.1~11A 0.1~5.5A 0.1~22A Constant Voltage Operation Line regulation Load regulation Ripple & Noise (5Hz~1MHz) Recovery time Constant Current Operation Line regulation Load regulation Ripple & Noise Display Voltm eter Amm eter 0.01%+3mV 0.01%+3mV (I 3A); 0.02%+5mV (I>3A) 1mVrms (I 3A); 2m Vrms (I>3A); 3mVrms (V 75V) 100us (50% load change, minimum load 0.5A) 0.2%+3mA 0.2%+3mA (I 3A); 0.2%+5mA (I>3A) 3mArms (I 3A), 6mArms (I>3A) 5 digits LCD display 5 digits LCD display 1mVrms 5mAms Setting resolution Reading resolution 1mV/0.1mA 1mV/0.1mA 1mV/1mA 2mV/0.1mA 1mV/1mA Voltage 1mV 1mV 1mV 1mV 1mV Current 0.1mA 0.1mA 1mA 0.1mA 1mA Setting accuracy (25±5 ) Reading accuracy (25±5 ) General Protection Panel lock Voltage Current Voltage Current ±(0.03% of reading + 10mV) ±(0.2% of reading + 10mA) ±(0.2% of reading + 20mA) : PSP-1820 ±(0.02% of reading +5mV) ±(0.05% of reading +5mA) ±(0.05% of reading +10mA) : PSP-1820 Over load, over voltage, over current, over temperature and reverse polarity protections Provided Remote sense function Battery charge Maximum compensation voltage 0.1V@ Maximum output Lithium battery curve charge 21

25 PSP Series Model PSP-3605 PSP-6005 PSP-3010 PSP-7505 PSP-1820 General Protection Panel lock Remote sense function Battery charge Over load, over voltage, over current, over temperature and reverse polarity protections Provided Maximum compensation voltage Maximum output Lithium battery curve charge RS232 interface, Support SCPI commands Interface RS232 to USB cable Optional RS485 interface, support ModBus Optional 0-5V analog control Mem ory Insulation Operating environment Storage environment Power source Accessories Dimension (WxHxD) Weight 100 sets Between base and terminals: 20MΩ/500VDC Between base and AC power cord: 30MΩ/500VDC Indoor use Altitude: 2000m Ambient temperature: 0~40 Relative humidity: 80% Installation category: II Pollution degree: 2-10 ~70, 70%RH AC110V/220V±10% selectable, 50/60Hz Pow er cord x1, Operation manual x1, RS232 cable x1, Softw are CD x1, Test lead x1 215x89x352mm 8kg 8kg 8.5kg 8.5kg 9.8kg PSP-3605 PSP-3010 PSP-1820 PSP

26 195W~315W MULTI CHANNEL PROGRAMMABLE DC POWER SUPPLY PS 3300 Series The PS 3300 series programmable DC power supply are light weight, adjustable, multifunctional work stations. They have three independent outputs: two with adjustable voltage level and one with fixed level selectable from 2.5V, 3.3V and 5V. The power supply can be used for logic circuits where various output voltage or current are needed, and for tracking mode definition systems where positive and negative voltages with good accuracy are required. PS-3303U & PS-3305U PS-3303 & PS-3305 MODEL DUAL OUTPUT FIXED OUTPUT USB VOLTAGE CURRENT VOLTAGE CURRENT INTERFACE PS-3303U 0~30V 0~3A 2.5V/3.3V/5V 3A PS-3305U 0~30V 0~5A 2.5V/3.3V/5V 3A PS ~30V 0~3A 2.5V/3.3V/5V 3A PS ~30V 0~5A 2.5V/3.3V/5V 3A Features Two independent adjustable outputs : 0~30V/3A x 2, 0~30V/5A x 2 One fixed output : 2.5V/3.3V/5V(Selectable)-3A Constant voltage and constant current operations Digital panel control and Coarse/Fine volume control for voltage and current 4 sets panel settings of save & recall Panel lock function and output standby function Preset voltage and current Auto Series and Parallel tracking operations Intelligent cooling fan control USB Interface for PC control (PS-3303U & PS-3305U) Support Labview 23

27 Technical Specification PS 3300 Series MODEL PS-3303U & PS-3303 PS-3305U & PS-3305 Output 0-30V/3A x V/5A x 2 Constant voltage operation Line regulation 0.01%+3mV 0.01%+3mV Load regulation 0.01%+3mV 0.02%+5mV Recovery time 100us Ripple & Noise 1mV rms 2mV rms Temperature co-efficient 300PPm/ Constant current operation Line regulation 0.2%+3mA 0.2%+3mA Load regulation 0.2%+3mA 0.2%+5mA Ripple & Noise 3mA rms 6mA rms Tracking parallel Line regulation 0.01%+3mV 0.01%+3mV Load regulation 0.01%+5mV 0.02%+10mV Tracking serial Line regulation Load regulation 0.01%+5mV 300mV Positive and Negative Supply Slave tracking error: 0.5%+10mV of the master (No load. With load, add load regulation 300mV) CH3 output Regulation Ripple & Noise Output voltage Output current Line regulation 25mV, Load regulation 25mV 2mV rms 2.5V, 3.3V, 5V (selectable), ±8% 3A Protection Over voltage, over current, over load, over temperature, current limit, short circuit and reverser polarity protections. Insulation Between base and output terminal 20MΩ/500VDC Between base and power cord 30MΩ/500VDC Display Ammeter Voltmeter Display resolution 3.20A full scale, 3 digits 0.5 LED display 32.0V full scale, 3 digits 0.5 LED display Voltmeter: 100mV Ammeter: 10mA Saving accuracy Readback accuracy V : ±(0.5% of reading + 2digits) V : ±(0.5% of reading + 2digits) V : ±(0.5% of reading + 2digits V : ±(0.5% of reading + 2digits A: ±(0.5% of reading + 2digits) A : ±(0.5% of reading + 2digits) A : ±(0.5% of reading + 5digits) A : ±(0.5% of reading + 5digits) Dimension 300 x 220 x 148mm Net Weight Approx. 7.5kg Approx. 10.0kg 24

28 115W~205W TRIPLE OUTPUT LINEAR DC POWER SUPPLY P 3000 Series Our DC power supplies are the ideal DC sources for Lab, Service, Industrial or Educational applications. They are designed with an energy saving circuit for cooler. More reliable and efficient operation is performed at all output levels. All our power supplies have short circuit and overload protection providing full proof operation for any applications. P-3625T P-3035T PS-3015TRP MODEL DUAL OUTPUT FIXED OUTPUT VOLTAGE CURRENT VOLTAGE CURRENT P-3035T 0~30V 0~3A 5V 3A P-3625T 0~36V 0~2.5A 3.3V/5V 5A PS-3015TPR 0~30V 0~1.5A 5V 5A Features Output Voltage & Current : two variable & one fixed Constant voltage and current operation Each output has a readout for voltage and current (3 digit red LED display) Indicators for constant voltage, constant current and overload operation Coarse and fine voltage controls for accurate voltage and current settings Excellent load, line and ripple specifications Built-in current limiting circuit Short Circuit and overload protection Series, Parallel & Tracking Operation Output polarity : (+), (-), GND, positive or negative 25

29 Technical Specification P 3000 Series Model Output Constant voltage characteristics (CV mode) Constant current characteristics P-3035T P-3625T PS-3015TPR 0~30V Dual 5V Fixed 0~3A Dual 3A Fixed 0~36V Dual 3.3V/5V Fixed 0~2.5A Dual 5A Fixed 0~30V Dual 5V Fixed 0~1.5A Dual 5A Fixed (CC mode) Ripple and noise 3mA 3mA 2mA Fixed output Display Temperature Insulation Resistance Input power Supply Power Consumption Dimensions Voltage Current Input regulation Load regulation Ripple and noise Input regulation Load regulation Voltage Current Ripple and noise Line & Load Regulation Tracking Error (Slave) Voltmeter Am meter Type Type LED Indicators Operating Temperature Storage Temperature Cooling Method Max Voltage to Ground Weight Accessories 8mV 8mV 0.5mV 3mA 10mA 5V ±2.5% 3.3V/5V ±2.5% 5V ±2.5% 3A ±2.5% 5A ±2.5% 5A ±2.5% 2mVrms 0.1%±5mV ±(0.5%+10mV) of master supply 3 digits Red LED ± (0.2% rdg + 2digits) 100mV 3 digits Red LED ± (1.0% rdg + 3digits) 10mA Green LED : CV, Red LED : CC 0 ~ 35, 10 ~ 80% RH -20 ~ 60, 10 ~ 85% RH Fan Fan Free Air ±200V 30MΩ@ DC 500V : AC input to Chassis 20MΩ@ DC 500V : Chassis to input terminal AC 115/230V Selectable 400VA-310W 400VA-300W 230VA-175W 234 x 160 x 326mm Approx. 7.5Kg Approx. 9.5Kg Approx. 7.5Kg Instruction manual, Power Cord, Test lead 26

30 195W~315W TRIPLE OUTPUT LINEAR DC POWER SUPPLY PS 2303 & PS 2305 The PS 2300 series are linear DC power supplies with 3 channels, 180W to 300W output. In constant voltage and current operations, the power supply provides high regulation and low ripple & noise. Auto series and parallel operations double output voltage and current. The output ON/OFF control and preset voltage & current function protect the power supply and related loads from unexpected damages. The PS 2300 series are widely used in applications of powering operational amplifier, push pull stages, logic circuit and definition systems. PS-2303 PS-2305 MODEL DUAL OUTPUT FIXED OUTPUT VOLTAGE CURRENT VOLTAGE CURRENT PS ~30V 0~3A 5V 3A PS ~30V 0~5A 5V 3A Features Triple outputs : 0~30V/0~3A Dual - 5V/3A Fixed (PS-2303) 0~30V/0~5A Dual - 5V/3A Fixed (PS-2305) Over current protection Constant voltage & constant current, low ripple & noise, and low temperature drift Preset current limit point In the tracking mode, two outputs are automatically connected in series or parallel without extra cables. In series mode, the instrument can be connected as positive and negative supplies. Multi-tune potentiometer and easy to set up voltage Output standby function Overload protection 27

31 Technical Specification PS 2303 & PS 2305 Model PS-2303 PS-2305 Output voltage 0~30Vx2, fixed 5V 0~30Vx2, fixed 5V Output current 0~3A, fixed 3A 0~5A, fixed 3A Constant voltage operation Load regulation 0.01%+3mV 0.01%+3mV Line regulation 0.01%+3mV 0.02%+5mV Recovery time 100us Ripple & Noise 1mV rms 2mV rms Temperature co-efficient 300ppm/ Constant current operation Load regulation Line regulation Ripple & Noise 0.2%+3mA 0.2%+3mA 3mA rms Tracking operation Parallel Line regulation: 0.01%+3mV Line regulation: 0.01%+3mV Load regulation: 0.01%+3mV Load regulation: 0.02%+5mV Serial Fixed output 5V/3A Output accuracy Max.output current Line regulation Load regulation Ripple & noise Protection Display Line regulation: 0.01%+5mV Load regulation: 300mV Slave error: 0.5%+10mV, master without load (with load, add load regulation 300mV) 5V±0.25V 3A 15mV 15mV 2.0mVrms Current limit and short circuit protections Voltmeter display range 30V 30V Display resolution Display accuracy 100mV ±0.5%+2d Ammeter display range 3A 5A Display resolution Display accuracy Display mode Power source Operating environment Storage environment Dimension 10mA ±0.5%+2d 3 1/2 digit LED display AC110V/220V, 50/60Hz 5 ~40, <80% -10 ~70, <80% 245W*140H*345Dmm Weight 8.0KG 10KG 28

32 180W DUAL OUTPUT LINEAR DC POWER SUPPLY PS 3030DU Features Built-in digital numeric display Output : 0~30V/0~3A Dual Constant voltage and current operation Indicators for constant voltage, constant current and overload operation Low Power Consumption Built-in current limiting circuit coarse and fine voltage controls for accurate voltage and current setting Output polarity : (+), (-), GND, positive or negative Technical Specification Output Constant voltage characteristics (CV mode) Constant current characteristics (CC mode) Display Power Voltage Current Line regulation Load regulation Ripple and noise Line regulation Load regulation Ripple and noise Voltmeter Amm eter Insulation resistance MAX. Voltage to ground Input Power Power Consumption Dimensions & weight Type Type LED Indicator Operating Temperature Temperature Storage Temperature Cooling Method Storage temp. and humidity range 0 ~ 30 V Dual 0 ~ 3 A Dual 8mV 8mV 0.5mV rms 4mA 10mA 3mA rms 3 digits red LED ±(0.2% Rdg. + 2 digits) 100mV 3 digits red LED ±(1.0% Rdg. + 3 digits) 10mA Green LED : CV, Red LED : CC 30MΩ@DC500V : AC input to Chassis 20MΩ@DC500V : Chassis to input terminal ±200V 0 to 35, 10 to 80% RH -20 to 60, 10 to 85% RH Cooling Method Free Air AC115V/230V selectable 400VA / 320W 234 x 160 x 326mm(W H D), Approx. 7.5Kg 29

33 180W~300W DUAL OUTPUT LINEAR DC POWER SUPPLY PS 303DU & PS 305DU Features Two independent adjustable outputs - PS-303DU : 0~30V x 2, 0~3A x 2 - PS-305DU : 0~30V x 2, 0~5A x 2 Constant voltage and constant current operations Low ripple & noise and low temperature drift Auto Series and Parallel tracking operations Output ON/OFF control Over load and reverse polarity protections Technical Specification Model PS-303DU PS-305DU Output voltage 0~30V x 2 0~30V x 2 Output current 0~3A x 2 0~5A x 2 Constant voltage operation Load regulation 0.01%+3mV 0.01%+3mV Line regulation 0.01%+3mV 0.02%+5mV Recovery time 100us Ripple & Noise 1mV rms 2mV rms Temperature co-efficient 300ppm/ Constant current operation Load regulation Line regulation Ripple & Noise 0.2%+3mA, 0.02%+5mA 0.2%+3mA 3mA rms, 6mA rms Tracking operation Parallel Line regulation: 0.01%+3mV Line regulation: 0.01%+3mV Load regulation: 0.01%+3mV Load regulation: 0.02%+5mV Line regulation: 0.01%+5mV Serial Load regulation: 300mV Tracking error: 0.5%+10mV of the master, no load ( with load, add load regulation 300mV) Display Voltm eter display range 30V 30V Display resolution Display accuracy 100mV ±0.5%+2 digits Amm eter display range 3A 5A Display resolution Display accuracy Display mode Power source Operating / Store environment Dimension 10mA ±0.5%+2 digits 3 1/2 digit LED display AC110V/220V, 50/60Hz 5 ~40, <80%RH / '-10 ~70, <70%RH 260W*160H*330Dmm Weight 8.0KG 9.0KG 30

34 180W~250W SINGLE OUTPUT LINEAR DC POWER SUPPLY PS 3060/PS 6030/PS 5050 Features Built-in digital numeric display Output : 0~30V/0~6A, 0~60V/0~3A & 0~50V/0~5A Constant voltage and current operation Low Power Consumption Built-in current limiting circuit coarse and fine voltage controls for accurate voltage and current setting Output polarity : (+), (-), GND,positive or negative Technical Specification Model PS-3060 PS-6030 PS-5050 Output Voltage 0 ~ 30 V 0 ~ 30 V 0 ~ 50 V Output Current 0 ~ 6 A 0 ~ 6 A 0 ~ 5 A Constant Voltage Operaiton Input regulation 5mV 8mV 12mV Load regulation 5mV 8mV 12mV Ripple and noise Temperature coefficient 1mV rms, 4mV P-P 100ppm/ C Typical Constant Current Operation Input regulation 6mA 3mA 5mA Load regulation 15mA 15mA 15mA Ripple and noise 3mA rms 2mA rms 3mA rms Temperature coefficient 250ppm/ C Typical Digital Meter Indication Voltmeter indication Ammeter indication Insulation Resistance Between chassis and Input power supply Between chassis and output terminal Output polarity Operating& Storage Temperature & Humidity Ground proof voltage Input power Supply Dimensions & weight Red 3-digit LED, Max 99.9V, fixed range Output ON : ± (0.2% rdg + 2digits) Red 3-digit LED, Max 99.9V, fixed range Output ON : ± (1.0% rdg + 3digits) DC500V 30MΩ DC500V 20MΩ +(RED), -(BLACK), GND(GREEN), positive or negative grouding 0 ~ 40, 10 ~ 80% RH / -20 ~ 60, 10 ~ 85% RH ±200V AC100V/120V/220V/230V selectable, 50/60Hz 210 x 163 x 347mm Approx. 10Kg Approx. 10Kg Approx. 15Kg 31

35 90W~150W SINGLE OUTPUT LINEAR DC POWER SUPPLY PS 303 & PS 305 Features Built-in digital numeric display Output : 0~30V/0~3A & 0~30V/0~5A Constant voltage and current operation Low Power Consumption Built-in current limiting circuit Coarse and fine voltage controls for accurate voltage and current setting Output polarity : (+), (-), GND, positive or negative Technical Specification Model PS-303 PS-305 Output Voltage 0 ~ 30 V 0 ~ 30 V Output Current 0 ~ 3 A 0 ~ 5 A Constant Voltage Operaiton Input regulation 8mV 8mV Load regulation 8mV 8mV Ripple and noise 0.5mV rms, 4mV P-P 0.5mV rms, 4mV P-P Constant Current Operation Input regulation 4mA 8mA Load regulation 10mA 20mA Ripple and noise 3mA rms 5mA rms Digital Meter Indication Voltmeter indication Ammeter indication Red 3-digit LED, Max 99.9V, fixed range Output ON : ± (0.2% rdg + 2digits) Red 3-digit LED, Max 99.9V, fixed range Output ON : ± (1.0% rdg + 3digits) Insulation Resistance Between chassis and Input power supply Between chassis and output terminal Output polarity Operating & Storage Temperature/ Humidity Ground proof voltage Input power Supply Dimensions DC500V 30MΩ DC500V 20MΩ +(RED), -(BLACK), GND(GREEN), positive or negative grouding 0 ~ 35, 10 ~ 80% RH / -20 ~ 60, 10 ~ 85% RH ±200V AC115V/230V selectable 124 x 160 x 326mm Weight Approx. 5Kg Approx. 5.5Kg 32

36 90W~300W SINGLE OUTPUT LINEAR DC POWER SUPPLY Features Two digital panel meters Constant voltage and constant current operation High efficiency, light and compact design Preset current limit point Output standby function Overload and Reverse polarity protections PS-1303/1305/1603 MODEL VARIABLE OUTPUT FIXED OUTPUT VOLTAGE CURRENT VOLTAGE CURRENT PS ~30V 0~3A 5V 1A PS ~30V 0~5A 5V 1A PS ~60V 0~3A 5V 1A PS ~30V 0~10A Technical Specification PS-3010 Model PS-1303 PS-1305 PS-1603 PS-3010 Output Voltage Output Current 0-30V Variable 0~3A Variavle 0-30V Variable 0~5A Variable 0-60V Variable 0~3A Variable 0-30V Variable 0~10A Variable 5V Fixed 1A Fixed 5V Fixed 1A Fixed 5V Fixed 1A Fixed Constant voltage operation Line regulation 0.01%+3mV 0.01%+5mV Load regulation 0.01%+3mV 0.02%+5mV 0.02%+5mV 0.02%+5mV Recovery time Ripple & Noise 100us(50% load change, minimum load 0.5 A) 2mV rms Constant current operation Line regulation Load regulation 0.2%+3mA 0.2%+3mA 0.2%+10mA Ripple & Noise 3mA rms Display Voltmeter display range 30V 60V 30V Display resolution Display accuracy 100mV 0.5% reading + 2 digits Ammeter display range 3A 5A 3A 10A Display resolution Display accuracy Display mode Power source Operating environment Storage environment Dimension 10mA 1% reading + 2 digits 3 1/2 digit LED display AC110V/220V, 50/60Hz 5 ~40, <80% -10 ~70, <80% 165 x 130 x 330 mm 255 x 155 x 375 mm Net Weight Approx. 4kg Approx. 5.6kg Approx. 5.6kg Approx. 9kg 33

37 200W~100KW AC POWER SOURCE Applications Development, Production, Test, etc. for electric & electronic equipment Frequency Conversion in various laboratories Motor Testing Air Conditioner Testing Features MODEL Power Supply Testing General Laboratory Transformer Testing Magnetic Testing Reliability Testing Standard AC power source ACP / ACPF / AFC Series OUTPUT VOLTGAGE VOLTAGE STABILITY OUTPUT FREQUENCY FREQUENCY STABILITY ACP series 0~300V 50,60,400,40~999Hz ± 0.2% (option : 0~700V) (option : 10~5000Hz) ± 0.01% ACPF series 0~300V ± 0.5% 50,60,45~500Hz ± 0.5% AFC series 0~300V ± 1.0% 50,60,45~65Hz ± 0.1% ACP-PAM Series P.A.M (Power Amplifier Modulation) Type CPU control Digital control Less than 1% Distortion Constant voltage stability : ±0.2% Constant frequency stability : ±0.01% Overload protection Remote control using RS-232C (Optional) ACPF-MPWM Series Multi-P.W.M (Pulse Width Modulation) Type Digital Control I.G.B.T high frequency switch Constant voltage stability : ±0.5% Constant frequency stability : ± 0.5% Remote control using RS-232C (Optional) AFC-MPWM Series Multi-P.W.M (Pulse Width Modulation) Type Digital control I.G.B.T high frequency switch High efficiency & low audible noise Constant voltage stability : ±1% Constant frequency stability : ± 0.1% Remote control using RS-232C (Optional) 34

38 ACP / ACPF / AFC Series Model # Combination ACP / ACPF / AFC ACP-300 ACP-500-1K -2K -3K -5K -7.5K Output Capacity 300VA 500VA 1KVA 2KVA 3KVA 5KVA 7.5KVA ACP / ACPF / AFC -10K -15K -20K -30K -50K -75K -100K Output Capacity 10KVA 15KVA 20KVA 30KVA 50KVA 75KVA 100KVA Technical Specification Model ACP series ACPF series AFC series Circuit Type Input Voltage P.A.M (Power Amplifier Modulation) M.P.W.M (Multi-Pulse Width Modulation) M.P.W.M (Multi-Pulse Width Modulation) 100V / 110V / 115V / 120V / 200V / 220V / 230V / 240V / 380V / 440V, 1PHASE or 3PHASE(Option) (±10%) Input Frequency 50 Hz / 60 Hz Output Voltage 0~300V (option : 0~700V) 1PHASE or 3PHASE(Option) 0~300V 1PHASE or 3PHASE (option) 0~300V 1PHASE or 3PHASE (option) Voltage Stability ±0.2% ±0.5% ±1% Output Frequency 50,60,400,40~999 Hz (option : 10~5000 Hz ) 50,60,45~500 Hz Variable 50,60,45~65 Hz Variable Frequency Stability ±0.01% ±0.5% ±0.1% T.H.D 1% ±3% ±3% Protector Frequency Meter V.A-Meter Temperature Humidity Output Wave Optional Remote Control Electronic Circuit / Over Load / Short Circuit LED Digital Display True RMS LED Digital Display 0~40 0~90% True Sine Wave Remote Control Function(RS-232C : Variable Voltage) Remote Multi-control (RS-485) 35

39 25MHz~60MHz ARBITRARY WAVEFORM FUNCTION GENERATOR AFG 2025/2040/2060 The AFG 2000 series arbitrary waveform/function generators with maximum frequency of 25MHz, 40MHz and 60MHz were designed based on Direct Digital Synthesis (DDS) technology providing high fidelity, low jitter performance function signal and arbitrary waveform signal. The AFG 2000 series are equipped with 150MSa/s sampling rate, 14 bits vertical resolution, ±1ppm high stability and high accuracy waveform output, 250MHz frequency counter as well as digital modulations of AM, DSSC AM, FM, PM, ASK, FSK, BPSK. Built in USB device, USB host and RS232 interface supports easy remote control. 4.3 inch TFT LCD display, user friendly interface design and keyboard layout bring excellent operation experience for users. AFG-2025 AFG-2060 AFG-2040 Features Frequency range 1μHz~25MHz/40MHz/60MHz 2 independent output channels at same frequency range for main waveforms 4.5-inch TFT LCD display Min. output amplitude 1mVpp (50Ω), total distortion 0.2% Sampling rate 150MSa/s, vertical resolution 14 bits, waveform length 16k points 6 standard waveforms, 50 built-in waveforms and 12 user-defined arbitrary waveforms 10 sets save & recall for operating parameters Modulations: AM, DSSC AM, FM, PM, ASK, FSK, BPSK Synchronous output, external modulation input, trigger input, external reference input and count input Linearity/Logarithmic sweep signal and Burst signal Channel coupling, parameter (frequency, amplitude, offset, phase) coupling and point frequency replication tracking Strong arbitrary waveform building software & support SCPI commands Over voltage, over current, short circuit and reverse voltage protections Standard interface: RS232, USB device, USB Host 36

40 Technical Specification AFG 2025/2040/2060 Model Output Frequency Range AFG-2025 AFG-2040 AFG-2060 Sine 1μHz ~ 25MHz 1μHz ~ 40MHz 1μHz ~ 60MHz Square 1μHz ~ 5MHz 1μHz ~ 10MHz 1μHz ~ 15MHz Ramp 1μHz ~ 500kHz 1μHz ~ 1MHz 1μHz ~ 1MHz Pulse 1μHz ~ 5MHz 1μHz ~ 10MHz 1μHz ~ 15MHz Noise Arbitrary & Waveform Output waveform Waveform length Vertical resolution & Sampling rate Harmonics distortion Sine Total distortion Square Rise/fall edge Pulse Duty cycle & Edge jitter Ramp Symmetry & Non-linearity Noise Repeat cycle Sampling rate Arbitrary Vertical resolution Output Characteristics 30MHz white noise (-3dBm) 1μHz ~ 6.5MHz 1μHz, ± Sine, Square, Ramp, Pulse, Noise, Arb, DC 8~16384 points (CHA), 8~2048 point (CHB) 14 bits, 150MSa/s < -70dBc, < 20kHz < -50dBc, 20kHz ~ 1MHz < -40dBc, 1MHz ~ 30MHz < -30dBc, 30MHz ~ 60MHz 0.2% (20Hz f 100 khz) 18ns 0.1% ~ 99.9%, 150ps rms 0.0% ~ 100.0%, 0.1%, 5%~95% of signal >50 years 1μSa/s ~ 50MSa/s 14 bits High impedance : 2mVpp~20Vpp 20MHz 2mVpp~10Vpp 60MHz CHA range 50Ω : 1mVpp~10Vpp 20MHz 1mVpp~5Vpp 60MHz Am plitude CHB range High impedance : 2mVpp~6Vpp 60MHz 50Ω : 1mVpp~3Vpp 60MHz Flatness (1kHz) ±0.1dB (<100kHz), ±0.3dB (100kHz ~ 10MHz), ±0.5dB (10MHz ~ 60MHz) CHA level range High impedance : ±(10V DC~AC peak/2) 50 Ω : ±(5 VDC~AC peak/2) High impedance : ±(189.3 mv DC AC peak/2) CHB level range Offset 50 Ω : ±(94.7 mv DC AC peak/2) CHA accuracy CHB accuracy AM modulation depth FM modulation deviation ±1% offset setting value ±0.25% amplitude setting value ±2mV ±1% offset setting value ±0.25% amplitude setting value ±3mV 0.0%~120.0% 0 ~fc/2 Modulation PM modulation range 0.0 ~360.0, FSK 1μHz~Fsinemax (Sine), 1μHz~15MHz (Square/Pulse), 1μHz~1MHz (Ramp) BPSK ASK 0.0 ~ mVpp~ 20Vpp Sweep Burst Sweep mode & time Mode & Interval time Linearity/Logarithmic, 0.001s~1000s N Cycle/Gated Trigger source Burst numbers Int/Ext/Bus, 1μ ~1000S, resolution 1μS 1~ , resolution 1 Pulse Pulse width Overshoot & Edge jitter 28.5 ns ~ period ns 2%(CHA) (50Ω), 150ps rms Frequency Counter range & resolution 0.1Hz~250 MHz, 6 digits/s Interface USB Device, USB Host, RS232 Power source AC100~240V, 47~63Hz, Max. 30VA Accessories Power cord x1, Operation manual x1, Software CD x1, USB cable x1, RS- 232 cable x1, BNC-BNC cable x1, Test lead x1 Dimension Chassis: 260Wx110Hx385D mm Instrument: 295Wx195Hx415D mm Weight 4kg 37

41 10MHz~20MHz ARBITRARY WAVEFORM & DDS FUNCTION GENERATOR DFG 1010/1020 & AFG 1010/1020 The AFG 1000 series arbitrary waveform/function generators with maximum frequency of 10MHz and 20MHz are designed based on Direct Digital Synthesis (DDS) technology providing flexible performance and system features for basic scientific and industrial requirements. The 8 bits resolution, 100MSa/s sampling rate, 1024 pts memory length, 32 built in waveforms and 8 user defined arbitrary waveforms create various waveforms for different needs. The AFG 1000 series have additional functions of multiple modulations FM, FSK, ASK and PSK, 200MHz external frequency counter, 40 sets memories and multiple protections. Stable output frequency, high accuracy and low distortion make TFG3600E series an ideal solution for an accurate and affordable signal source for industrial, scientific research and educational applications. DFG-1010 & DFG-1020 AFG-1010 & AFG-1020 Features Max. output frequency of 10MHz & 20MHz 2 output channels 3.5-inch TFT LCD display Direct Digital Synthesis technology (DDS) Min. output amplitude 1mV (50Ω) with good stability Sampling rate 100MSa/s, vertical resolution 8 bit, waveform length 1024 points Arbitrary waveform function (AFG-1010 & AFG-1020) 32 built-in waveforms and 8 user-defined arbitrary waveforms 40 sets save & recall for panel settings Modulations: FM, FSK, ASK, PSK Frequency sweep, amplitude sweep, burst and TTL output functions Over voltage, over current, short circuit and reverse voltage protections High speed rotary dial and keypad input Standard RS-232 interface for PC remote control Standard 200MHz external frequency counter 38

42 Technical Specification DFG 1010/1020 & AFG 1010/1020 Model DFG-1010 DFG-1020 AFG-1010 AFG-1020 Output frequency 1μHz~10MHz 1μHz~20MHz 1μHz~10MHz 1μHz~20MHz Waveform Output waveform 32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc. 8 user-defined arbitrary waveforms Waveform length 1024 points Vertical resolution 8 bits Sampling rate 100MSa/s Sine Harmonic distortion 40dBc (<1MHz); 35dBc (1~20MHz) Total distortion 1% (20Hz~200kHz) Square Rise/fall time Overshoot Duty cycle 35ns 10% 1%~99% Frequency Sine 1μHz~10MHz 1μHz~20MHz 1μHz~10MHz 1μHz~20MHz Range Square Other 1μHz~5MHz 1μHz~1MHz 1μHz ±5x10-5 Stability ±5x10-6 /3hours Output characteristics 2mVpp~20Vpp (open circuit, 10MHz) Range 2mVpp~15Vpp (open circuit, 10MHz~15MHz) 2mVpp~8Vpp (open circuit, 15MHz~20MHz) Am plitude 20mVpp (amplitude>2vpp); 2mVpp (amplitude<2vpp) ±(1%+2mVrms) (open circuit, 1kHz, sine) Offset Stability Flatness Output impedance Range ±0.5% /3hours ±5% (<10MHz); ±10% (>10MHz) 50Ω ±10V (open circuit, attenuation 0 db) 20mVdc ±(1%+20mVdc) Sweep Parameter Frequency, Amplitude Range Free to set start and stop point Time 100ms~900s Direction Up, Down, Up-Down Mode Linearity, Logarithmic Control Auto sweep or manual sweep Frequency Modulation (FM) Carrier signal CHA signal Modulating signal CHB or external signal Deviation 0%~20% 39

43 DFG 1010/1020 & AFG 1010/1020 Model DFG-1010 DFG-1020 AFG-1010 AFG-1020 Shift Keying FSK Free to set the hop frequency and the carrier frequency ASK Free to set the hop amplitude and the carrier amplitude PSK Hop phase: 0~360, resolution: 1 Alternative rate 10ms~60s Burst Carrier signal CHA signal Trigger signal Burst counts TTL_A signal 1~65000 cycles Trigger source Internal TTL, External, Single CHB output characteristics Output waveform Waveform length Vertical resolution Sampling rate Frequency range Frequency resolution Frequency accuracy 32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc. 8 user-defined arbitrary waveforms 1024 points 8 bits 12.5MSa/s Sine: 1μHz~1MHz; Other: 1μHz~100kHz 1μHz ±1x10-5 Amplitude range Amplitude resolution Output impedance 50mVpp~20Vpp (open circuit) 20mVpp 50Ω CHB signal is used as burst signal Carrier signal Trigger signal Burst counts Trigger source CHB signal TTL_B signal 1~65000 cycles Internal TTL, External, Single TTL output Waveform Frequency Square, rise/fall time 20ns 10mHz~1MHz Amplitude TTL, CMOS compatible, low<0.3v, high>4v Frequency counter Frequency range Input amplitude 1Hz~200MHz 100mVpp~20Vpp General Operation characteristics Key operation for all functions, Menu display, Rotary dial adjustment Display Interface Operating environment 3.5-inch TFT LCD RS-232 interface 0~40, <80%RH Power source AC110V/220V±10% selectable, 50/60Hz, Max. 45VA Accessories Power cord x1, Operation manual x1, Software CD x1, RS-232 cable x1, BNC-BNC cable x1, Test lead x1 Dimension (WxHxD) Weight 260x110x385mm 3.5kg 40

44 5MHz~20MHz LOW COST DDS FUNCTION GENERATOR DFG 2005/2010/2020 The DFG 2000 series LOW COST function generators with maximum frequency of 5MHz, 10MHz and 20MHz were designed based on Direct Digital Synthesis (DDS) technology providing flexible performance and system features for basic scientific and industrial requirements. These models are equipped with 8 bit resolution, 100MSa/s sampling rate, 1024 pts memory length and 32 built in waveforms for various waveforms for different needs. The DFG 2000 series have additional functions of multiple modulations of FM, FSK, ASK and PSK, 200MHz external frequency counter, 40 sets memories and multiple protections. Low cost, stable output frequency, high accuracy and low distortion make DFG 2000 series an ideal solution for an accurate and affordable signal source for industrial, scientific research and educational applications. DFG-2005 DFG-2020 DFG-2010 Features Max. output frequency of 5MHz/10MHz/20MHz 2 output channels Direct Digital Synthesis technology (DDS) Min. output amplitude 1mV (50Ω) with good stability Sampling rate 100MSa/s, vertical resolution 8 bits and waveform length 1024 points 32 built-in waveforms 40 sets save & recall for panel settings Modulations: FM, FSK, ASK, PSK Frequency sweep, amplitude sweep, burst and TTL output functions Over voltage, over current, short circuit and reverse voltage protections High speed rotary dial and keypad input Standard 200MHz external frequency counter RS-232 interface for PC remote control RS232 cable & RS232 to USB cable provided 41

45 Technical Specification DFG 2005/2010/2020 Model DFG-2005 DFG-2010 DFG-2020 Output frequency 1μHz~5MHz 1μHz~10MHz 1μHz~20MHz Waveform Output waveform 32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc. Waveform length 1024 points Vertical resolution 8 bits Sampling rate 100MSa/s Sine Harmonic distortion 40dBc (<1MHz); 35dBc (1~20MHz) Total distortion 1% (20Hz~200kHz) Square Rise/fall time Overshoot Duty cycle 35ns 10% 1%~99% Frequency Sine 1μHz~5MHz 1μHz~10MHz 1μHz~20MHz Range Square Other 1μHz~5MHz 1μHz~1MHz 1μHz ±5x10-5 Stability ±5x10-6 /3hours Output characteristics 2mVpp~20Vpp (open circuit, 10MHz) Range 2mVpp~15Vpp (open circuit, 10MHz~15MHz) 2mVpp~8Vpp (open circuit, 15MHz~20MHz) Amplitude 20mVpp (amplitude>2vpp); 2mVpp (amplitude<2vpp) ±(1%+2mVrms) (open circuit, 1kHz, sine) Offset Stability Flatness Output impedance Range ±0.5% /3hours ±5% (<10MHz); ±10% (>10MHz) 50Ω ±10V (open circuit, attenuation 0 db) 20mVdc ±(1%+20mVdc) Sweep Parameter Frequency, Amplitude Range Free to set start and stop point Time 100ms~900s Direction Up, Down, Up-Down Mode Linearity, Logarithmic Control Auto sweep or manual sweep Frequency Modulation (FM) Carrier signal CHA signal Modulating signal CHB or external signal Deviation 0%~20% 42

46 DFG 2005/2010/2020 Model DFG-2005 DFG-2010 DFG-2020 Shift Keying FSK Free to set the hop frequency and the carrier frequency ASK Free to set the hop amplitude and the carrier amplitude PSK Hop phase: 0~360, resolution: 1 Alternative rate 10ms~60s Burst Carrier signal CHA signal Trigger signal TTL_A signal Burst counts 1~65000 cycles Trigger source Internal TTL, External, Single CHB output characteristics Output waveform 32 built-in waveforms, including Sine, Square, Triangle, Ramp, Pulse, etc. Waveform length 1024 points Vertical resolution 8 bits Sampling rate 12.5MSa/s Frequency range Sine: 1μHz~1MHz; Other: 1μHz~100kHz Frequency resolution 1μHz Frequency accuracy ±1x10-5 Amplitude range 50mVpp~20Vpp (open circuit) Amplitude resolution 20mVpp Output impedance 50Ω CHB signal is used as burst signal Carrier signal CHB signal Trigger signal TTL_B signal Burst counts 1~65000 cycles Trigger source Internal TTL, External, Single TTL output Waveform Square, rise/fall time 20ns Frequency 10mHz~1MHz Amplitude TTL, CMOS compatible, low<0.3v, high>4v Frequency counter Frequency range 1Hz~200MHz Input amplitude 100mVpp~20Vpp General Operation characteristics Key operation for all functions, Menu display, Rotary dial adjustment Display Mono LCD Interface Optional RS-232 interface Operating environment 0~40, <80%RH Power source AC110V/220V±10% selectable, 50/60Hz, Max. 45VA Standard accessories Dimension (WxHxD) Weight Power cord x1, Operation manual x1, BNC-BNC cable x1, Test lead x1, Software CD x1, USB Cable x1, RS-232 cable x1 260x110x385mm 3.5kg 43

47 40MHz ~ 60MHz DDS FUNCTION GENERATOR DFG 2040 & DFG 2060 The DFG 2040 & DFG 2060 DDS function generators with high frequency of 40MHz and 60MHz are designed based on Direct Digital Synthesis (DDS) technology providing flexible performance and system features for basic scientific and industrial requirements. Features DFG-2040 DFG-2060 The10 bits resolution, 180MSa/s sampling rate, 16k pts memory length, and 32 built in waveforms create various waveforms for different needs. PC software for USB and RS 232 interfaces control and 200MHz frequency counter are provided. These models have additional functions of multiple modulations FM, AM, FSK, ASK and PSK, 40 sets memories and multiple protections. Low cost, multifunctional, high accuracy and low distortion make them an ideal solution for an accurate and affordable signal source for industrial, scientific research and educational applications. Max. output frequency of 40MHz & 60MHz 2 output channels Direct Digital Synthesis technology (DDS) Min. output amplitude 1mV (50Ω) with good stability Sampling rate 180MSa/s, vertical resolution 10 bits, waveform length points 32 built-in waveforms 40 sets save & recall for panel settings Modulations: FM, AM, FSK, ASK, PSK Frequency sweep, amplitude sweep, burst, CHA & CHB ADD and TTL output functions Over voltage, over current, short circuit and reverse voltage protections High speed rotary dial and keypad input 200MHz external frequency counter USB & RS-232 interface for PC remote control USB cable & RS232 cable provided 44

48 Technical Specification DFG 2040 & DFG 2060 Model DFG-2040 DFG-2060 Output frequency 40μHz~40MHz 40μHz~60MHz Waveform Output waveform Sine, Square, Pulse, DC Waveform length 4~16000 points Vertical resolution 10 bits Sampling rate 180MSa/s Sine Harmonic distortion 50dBc (<1MHz); 40dBc (1~20MHz); 30dBc (>20MHz) Total distortion 0.5% (20Hz~200kHz) Square Pulse Rise/fall time Overshoot Duty cycle Rise/fall time Overshoot Duty cycle 20ns 5% 50.00% 20ns 5% 0.1%~99.9% Frequency Sine 40μHz~40MHz 40μHz~60MHz Range Square Other 40μHz~20MHz 40μHz~10MHz 40μHz (40μHz~2kHz); 40mHz (>2kHz) ±(5x mHz) Stability ±5x10-6 /3hours Output characteristics 1mVpp~10Vpp (into 50Ω, 10MHz) 1mVpp~5Vpp (into 50Ω, 10MHz~40MHz) Range 1mVpp~2Vpp (into 50Ω, 40MHz) 2mVpp~20Vpp (open circuit, 10MHz) 2mVpp~10Vpp (open circuit, 10MHz~40MHz) Amplitude 2mVpp~4Vpp (open circuit, 40MHz) 20mVpp (amplitude>2v); 2mVpp (amplitude<2v) ±(1%+2mVrms) (open circuit, 1kHz, sine) ±0.5% /3hours ±5% (<1MHz); ±10% (1~10MHz); ±20% (>10MHz) 50Ω Offset Stability Flatness Output impedance Range ±10V (open circuit, attenuation 0 db) 20mVdc ±(1%+20mVdc) Sweep Parameter Frequency, Amplitude Range Free to set start and stop point Time 100ms~600s Direction Up, Down, Up-Down Mode Linearity, Logarithmic Control Auto sweep or manual sweep Frequency Modulation (FM) Modulating signal Internal or external signal Deviation 0%~20% 45

49 Burst frequency Burst count Trigger source TTL output Waveform Frequency 10mHz~50kHz 1~65000 cycles Continuous, Single DFG 2040 & DFG 2060 Model DFG-2040 DFG-2060 Amplitude Modulation (AM) Modulating signal Internal or external signal Depth 0%~120% Shift Keying FSK Free to set the hop frequency and the carrier frequency ASK PSK Alternative rate Free to set the hop amplitude and the carrier amplitude Hop phase: 0~360, resolution: ms~60s CHB output characteristics Output waveform 32 built-in w aveforms, including Sine, Square, Triangle, Saw tooth, Ladder, etc. Waveform length 1024 points Vertical resolution 8 bits Sampling rate 12.5MSa/s Frequency range Sine: 10mHz~1MHz; Other: 10mHz~100kHz Frequency resolution Frequency accuracy Amplitude range Amplitude resolution 10mHz ±(1x mHz) 50mVpp~20Vpp (open circuit) 2mVpp Output impedance 50Ω CHB signal is used as the harmonic signal of CHA Harmonic times 0.1~250.0 times Harmonic frequency <1MHz Phase adjustment Coarse: 11.5 /step; Fine: 2 /step CHB signal is used as burst signal Frequency of CHB 40mHz~1MHz Amplitude Frequency counter Frequency range Input amplitude General Operation characteristics Interface Operating environment Power source Standard accessories Dimension (WxHxD) Weight Square, rise/fall time 20ns Same as CHA signal TTL, CMOS compatible, low<0.3v, high>4v 1Hz~200MHz 100mVpp~20Vpp Key operation for all functions, Menu display, Rotary dial adjustment USB and RS-232 interface 0~40, <80%RH AC110V/220V±10% selectable, 50/60Hz, Max. 45VA Power cord x1, Operation manual x1, BNC-BNC cable x1, Test lead x1, Software CD x1, USB cable x1, RS-232 cable x1 260x110x385mm 3.5kg 46

50 10KHz ~ 200KHz LCR METER LCR 1010/1030/1200 The LCR 1000 series are high precision LCR meter with basic accuracy 0.1% and maximum measurement frequency 10kHz, 30kHz and 200kHz. The 5 digit 4.3 inch TFT LCD display gives easy reading. The RS 232 interface facilitates in remote control and analysis of measurement results. With its fast measurement speed, wide frequency range and low cost, the LCR 1000 series are widely used in R&D, IQC, online quality control and automatic test system. LCR-1200 Features 32-bit core processor 5-digit 4.3-inch TFT LCD display 2 signal source output impedance: 30Ω, 100Ω 100 sets memories for internal storage/save 500 memories for U disk storage/save Support FAT16 and FAT32 files Save the last parameter settings before power off Standard interface : RS-232, HANDLER, USB HOST Optional interface : USB DEVICE, GPIB, headset, FOOT.C foot switch LCR-1010 LCR

51 Technical Specification LCR 1010/1030/1200 Model LCR-1010 LCR-1030 LCR-1200 Measurement function Test parameter Z, Y, C, L, X, B, R, G, D, Q, θ LCR-7010: 100Hz,120Hz,1kHz,10kHz LCR-7030: 100Hz,120Hz,1kHz,10kHz,20kHz,30kHz Test signal frequency LCR-7200: 40Hz, 50Hz, 60Hz, 75Hz, 100Hz, 120Hz, 150Hz, 200Hz, 250Hz, 300Hz, 400Hz, 500Hz, 600Hz, 750Hz, 800Hz, 1kHz, 1.5kHz, 2kHz, 2.5kHz, 3kHz, 4kHz, 5kHz, 6kHz, 7.5kHz, 10kHz, 12kHz, 15kHz, 15.7kHz, 16.2kHz, 20kHz, 25kHz, 30kHz, 40kHz, 50kHz, 60kHz, 66.6kHz, 75kHz, 100kHz, 120kHz, 150kHz, 200kHz (38 points) Basic accuracy 0.15% 0.10% 0.10% Equivalent circuit Series, Parallel Mathematical function Range mode Trigger mode Measurement speed Average times Delay time Calibration function Measurement terminal Display mode Display Deviation and Percent Deviation Auto, Hold, Manual Selection Internal, Manual, External, BUS Fast: max.30, Medium: 10, Slow: 3 (times/second) (( 1kHz)) s, step 1ms Open circuit, Short circuit, Load 5-terminal Direct,, %, V/I (monitoring tested voltage and current) 5 digit 4.3-in LCD display Measurement signal Output impedance Test level 30Ω, 100Ω 0.1V, 0.3V, 1V 0.1V, 0.3V, 1V 0.1V, 0.3V, 0.5V, 1V Test level accuracy 5% Measurement display range Z, R, X Y, G, B C L D Q θ (DEG) θ (RAD) % º º Comparator and interface Comparator N/A 4-bin sorting 5-bin sorting Memory 100 sets memories for internal parameter settings storage/save 500 sets for U disk parameter settings storage/save Standard interface Standard: RS232, USB HOST Standard: RS232, USB HOST, HANDLER Optional interface General USB device, GPIB Operating environment Power source Power consumption 0 C - 40 C, 80%RH 110/220V±10%, 47~63Hz Accessories Dimensions Weight 0.01m Ω MΩ µS S pf F µh H VA 4-terminal Kelvin test clip leads, 4 terminal test fixture, short circuit plate, RS232 cable, software CD, power cord, operation manual 265W*100H*340D mm Approx.3.5kg 48

52 STANDBY POWER METER with DATA LOGGER Wattman HPM 100A A surprisingly large number of electrical products such as PC s, TVs, Microwave ovens, Washers & Driers, Air conditioners, etc. cannot be switched off completely without being unplugged. These products draw power for 24 hours a day which power consumption we call standby power. There are some meters in the market to measure this standby power. Unfortunately, cost for some meters is too high or their accuracy is poor for low cost ones. Wattman HPM 100A is the best Standby Power Meter satisfying both price and accuracy featuring wide measurement input range, Data Logger, GUI Program, etc. Features Data Logger function GUI Program Gratuitous Supports Measurement of standby and consumption power (0.009W~3,600W) Simultaneous display of 4 values for Voltage, Current, Watt & Frequency Wide measurement range : AC, V, A, W, PF, Hz, Wh, VA, Var, CO₂, Ocosθ, Electric charge, expelled volume Easy to use with multi-consent (Plug & Play) Electric charge calculation and expelled volume of CO₂ computation available Battery or Adaptor no needed for measurement Timely Set (1 hour ~ 24 hours) Complied with IEC Safety Standard Complied with EN Safety Standard RS232 to USB cable provided 49

53 Technical Specification Voltage Measure Range Wattman HPM 100A Voltage AC 90V ~ 240V ±(0.3% reading+3 digits) Current Measure Range Current Wattage Measure Range AC 100uA ~ 5mA AC 5mA ~ 10A AC 10A ~ 15A ±(0.5% reading+3 digits) ±(0.3% reading+3 digits) ±(0.4% reading+3 digits) 0.009W ~ 0.45W ±(0.5% reading+3 digits) Active Power (PF 1.0) 0.45W ~ 2,600W ±(0.4% reading+3 digits) 2,600W ~ 3,600W ±(0.5% reading+3 digits) Reactive Power 0.009Var ~ 3,600Var ±(0.5% reading+3 digits) Apparent Power 0.009VA ~ 3,600VA ±(0.5% reading+3 digits) Power Factor Power Factor ± ~ ± (0.5% reading+3 digits) Wattage Measure Range Wattage 0.000mWh ~ 9,990kWh ± (1.0% reading+3 digits) Frequency Frequency 50Hz ~ 1000Hz ± (0.3% reading+3 digits) Dimension & Weight Dimension Weight 115 (W) x 200 (H) x 45 (D) mm 260 g Applications Public institution & consumption union Energy saving educational program Home appliance stores Electronic product line & service centers 50

54 Wattman HPM 100A GUI Program gratuitous supports 51

55 Wattman HPM 100A 1 Data Logging display 2 AC Input power 3 Data HOLD 4 PC Communication display 5 Wattage display 6 Frequency display 7 Power factor, CO₂ output & electric charge display unit 8 Currency display ($ ) 9 Measured Active Power & Watt-hour display unit 10 Current : current usage display for the other measuring device 11 Voltage : voltage usage display for the other measuring device 12 Autoranging indication 52

56 ALL IN ONE UNIVERSAL SYSTEM US 9170A Features 10MHz DDS Function Generator 2.7GHz Frequency Counter Triple Output DC Power Supply 4 ¾-dight Digital Multimeter Technical Specification Digital Multimeter DC Voltage Measurement Range Remarks 80mV 1µV ±(0.3% +10d) 800mV 10µV Input impedance: 8V 0.1mV 80mV~800mV>1000MΩ ±(0.05% +10d) 80V 1mV 8V~000V:10MΩ 800V 10mV 1000V 0.1V ±(0.8% +10d) True RMS of AC voltage Range <80% Range:50Hz~20kHz >80% Range:50Hz~20kHz 80mV 1μV ±(1.0% +50d) ±(5.0% +50d) 800mV 10μV ±(1.0% +50d) ±(5.0% +50d) 8V 0.1mV ±(1.0% +50d) ±(5.0% +50d) 80V 1m ±(1.0% +50d) ±(5.0% +50d) 750V 10mV 50Hz~1kHz: <90% Range:±(1.0% +50d) & >90% Range:±(3.0% +50) Remark: Input impedance: 80mV~800mV>1000MΩ;8V~1000V: 10MΩ, Parallel capacitance: <100pF 53

57 US 9170A DC Current Range Remarks 80mA 1µA Fuse: F 250V 1A(800mA range), ±(0.5%+10d) 800mA 10µA Voltage drop: 800mV 8A 0.1mA ±(0.8% +10d) Max. input current: 20A(less than 15s) 20A 1mA ±(1.5% +10d) True RMS of AC Current Range Remarks 80mA 1µA Fuses : F 250V 1A S 250V 15A ±(1.0% +20d 800mA 10µA Voltage drop: 800mV 8A 0.1mA ±(1.5% +20d) Sensitivity : ma range is 50Hz~5kHz, A range is 50Hz~400Hz 20A 1mA ±(2.0% +20) Max. Input Current: 20A(up to 15 seconds) - Resistor Range Remarks 800Ω 0.01Ω ±(0.2% +10d) Overload protection 8kΩ 0.1Ω 250Vrms 80kΩ 1Ω ±(0.2% +5d) 800kΩ 10Ω 8MΩ 100Ω ±(0.3% rdg+10d) 80MΩ 1kΩ 40MΩ:±(1.5 % +10) >40MΩ: ±(3.0% +10) - Frequency Range Remarks Hz 0.01Hz Overload protection: 250Vrms kHz 0.1Hz Sensitivity: 200mVpp 99.99kHz 1Hz ±(0.1% +5d) kHz 10Hz MHz 100Hz - Capacitor Range Remark 1nF 1pF 10nF 10pF 100nF 100 F ±(5.0% +50d) Overload protection: 250Vrms 1µF 1n 10µF 10nF 100µF 100nF - Temperature Temperature Remark -50 ~ <0 or 32 : ±(10% +5 ), 0 or 32 & 1000 or 1832 : K Thermocouple Type -58 ~ > 1000 or 1832 : ±(3.0% +20 ) - Diode Functio Range / Remarks Diode V ±(3.0% +5d) / V Diode positive voltage drop; overload protection: 250Vrms - dbm Function Range dbm dBm~ dBm ±1.0% 0.01dBm 54

58 US 9170A Square wave output Voltage Amplitude Frequency Description 3V approx. 0.5H z/1.0h z/2.0h z/10h z/50h z/60.24h z/74.63h z100h z/151.5h z/200h z/303h z/606.6h z/ 1250H/1666Hz/2500Hz/5000Hz Duty cycle 1% ~99% RS232 Communication for DMM It has function of RS232 communication which can make user record and save measured data conveniently. The user should setup RS232 software disc to PC and connect to PC with RS232 cables. DDS Function Generator Waveform characteristics Waveform type Sine, Triangle, Square Sine harmonious wave distortion(1vpp, 50Ω) <20kHz : -50dBc / 20kHz ~1MHz : -40dBc / 1MHz ~10MHz : -35dBc Sine wave distortion 1%(0.1Hz~100kHz ) Square wave Rise/Fall time Square overshot: 50n (1MHz, 50Ω, output voltage 5Vpp) 5% Square duty variable range 15%~85%( 10kHz ) Waveform asymm etry <1.5%+20ns of period( 100kHz ) Triangle linearity <1% ( 100kHz) Frequency characteristics Sine wave 0.1Hz ~10MHz Frequency range Square wave 0.1Hz ~2MHz (100mVpp~10Vpp,50Ω) 2MHz ~5MHz (100mVpp~2Vpp,50Ω) Other waveform 0.1Hz~1 MHz (TTL : 100KHz) Frequency accuracy Frequency stability Max. resolution ±( mHz ) ±50ppm(Long Term) 0.01Hz Amplitude Characteristics Output amplitude range 100mVpp~20Vpp(High Impedance) Amplitude flatness ±10% Output impedance 50Ω±10%/600Ω±10% Overshot Characteristic DC offset range(vpp AC+DC) ±10V(High Impedance) / ±5V(50Ω) Sweep Frequency Characteristics Type Sweep frequency Sweep range Linearity or Log Negative or positive 1Hz ~10MHz Sweep frequency velocity 0.01Hz ~100Hz Attenuation Attenuation 20dB / - Error: ±5%(±0.5dB)(open) 55

59 US 9170A External amplitude Input impedance 1kΩ Ext amplitude freq range (Inner impedance 50Ω of modulation source) : 0.1Hz ~20kHz Amplitude sensitivity 0~5Vpp±5% Amplitude depth 0~100% TTL Output: Output amplitude Low level 0.3V/high level 3.3V Output impedance 50Ω ±10% Frequency Counter Freq measurement range Input sensitivity Measurement accuracy Time base Max. Input voltage Input impedance CHA: 1Hz~110MHz / CHB: 110MHz ~2.7GHz CHA: 40mVrms or 100mVpp(1Hz ~80MHz ), 70mVrms or 200mVpp (80MHz ~110MHz ) CHB: 40mVrms(110MHz ~2.0GHz ), 70mVrms(2.0GHz ~2.7GHz ) ± /s ± time base error ± trigger error 10MHz, <± (5ppm) CHA: 35Vpp, CHB: 3Vpp CHA: 1MΩ, CHB: 50Ω [(± /s) measured signal frequency]/ Strobe time DC Power Supply CH1 output (output port) Output voltage Output current Ripple and noise Load effect Source effect Max. output current Display accuracy CH2 output (output port) Output voltage Output current Ripple and noise Load effect Source effect Max. output current CH3 output (output port) Output voltage Ripple and noise Output current Load effect Source effect Max. output current 0~30V 0~3A 3mVrms 0.1%+30mV 0.1%+15mV 3.1A Voltage: ±1%+2digit, Current: ±2%+2digit ±15Vfixed 1A 3mVrms 0.1%+50mV 0.1%+30mV 1.1A +5V fix ±3% 2A 3mVrms 0.1%+70mV 0.1%+60mV 21.1A 56

60 2MHz~10MHz SWEEP FUNCTION GENERATOR FG 8102/8105/8110 FG-8105 MODEL BANDWIDTH FREQUENCY COUNTER FG Hz ~ 3MHz 50MHz FG Hz ~ 5MHz 100MHz FG Hz ~ 10MHz 100MHz Features 4-in-1 Sweep, Function & Pulse Generator and Frequency Counter Versatile waveforms for Sine, Square, Triangle, Ramp, Pulse, Sawtooth and DC outputs CMOS (FG-8102 only) Built in 6 digits External Counter Display measuring up to 100MHz Internal and External linear Sweep control from 1:1 to 100:1 Variable Symmetry for generating Sawtooth and Pulse waveforms TTL leveled Square waveform output Variable DC Offset control Variable Output level control with 20 db Attenuator and Amplitude control FG-8102 FG

61 Technical Specification FG 8102/8105/8110 Model Output Characteristics Waveforms Frequency Range Frequency Output Level DC Offset Control Output Impedance Attenuator Waveform Characteristics Sine wave FG-8102 FG-8105 FG-8110 Sine, Square, Triangle, Ramp, Pulse, Sawtooth, TTL Leveled Square, DC CMOS (FG-8102 only) 0.02Hz to 2MHz in 7 Range 0.05Hz to 5MHz in 7 Range 0.1Hz to 10MHz in 7 Range ± 2% of full scale 20Vp-p in open circuit, 10Vp-p into 50Ω Load More than +/-5V (into 50ohm) 50Ω±5% -20dB fixed and continuously variable Flatness ±0.3dB to 3MHz ±0.3dB to 5MHz ±0.3dB to 10MHz Distortion Less than 1% at 0.1Hz to 100KHz Square wave Rise and Fall time Less than 120nSec Less than 25nSec Less than 25nSec Triangle wave Linearity More than 99% at 0.1Hz to 100 khz Rise and Fall time Less than 25nSec TTL Output Output Level TTL Level ( H ; Higher than 2.4V, L ; Lower than 0.4V) CMOS Output Level (FG-8102 only) Symmetry Variation Sweep Function Characteristics Mode Width Rate 5 to 15V ±2V N/A N/A 1 :1 to 10 : 1 Linear Variable from 1 :1 to 100 : 1 0.5Hz to 50Hz(20mSec to 2Sec) External VCF Input Input Voltage Input Impedance 0 to 10V Approx. 10 Kohm Frequency Counter Characteristics Display 6digit Green LED, Overflow, Gate time, MHz, khz, Hz, mhz (FG-8102) 7digit Green LED, Overflow, Gate time, MHz, khz, Hz, mhz (FG-8105 & FG-8110) Frequency Range 200mHz to 50MHz 200mHz to 100MHz 200mHz to 110MHz +/- Timebase Error+/- 1Count Low pass Filter -3dB, 100kHz Input Sensitivity 100mVrms Time base 10MHz Crystal, 20ppm Max. Input Voltage 250Vpp General Power Requirement 115/230 VAC ±10%, 48 to 66Hz Operating Temperature 0 to 50 ( specified at 25 ±- 5 ) Dimension & Weight 240(W) X 270(D) X 90(H)mm / 2Kg (FG-8102), 3Kg (FG-8105 & FG-8110) Standard Accessories Power Cord, BNC Cable, Fuse, Instruction Manual 58

62 1.5GHz~3.0GHz UNIVERSAL COUNTER FC 8150U & FC 8030U FC-8030U FC-8150U Features Frequency measuring range MODEL FREQUENCY FREQUENCY FREQUENCY INPUT A INPUT B INPUT C FC-8150U 0.1Hz - 100MHz 0.1Hz - 100MHz 80MHz~1.5GHz FC-8030U 0.1Hz - 100MHz 0.1Hz - 100MHz 80MHz~3.0GHz 10MHz TCXO Internal Time Base Time interval and Ratio measurement for input A & B Period and Total measurement for input A Trigger level adjustment for input A Separate and Common mode selectable for input A & B Slope mode selectable for input A & B 9 Digit display with 0.01 mhz resolution in 1 Sec. (By Ext. Reference Signal) RS-232C serial interface function for communicating with computer High sensitivity External reference input function( Higher than 1.5 Vrms) Reciprocal technique for high resolution at low counting frequencies Self check function executed to perform a automatic self diagnosis of various counter function Push-scanning for selecting Function and Gate time Low-pass filter(100 khz, -3 db) installed for removing noise signal in low frequency measuring AC/DC coupling function ( Selectable AC/DC Coupling ) 10:1 Input Attenuation ( Selectable x1/x10 Attenuator ) Data hold function 59

63 Technical Specification FC 8150U & FC 8030U Model Display Frequency Measurement Input Characteristics Multi Function for input A Comparison Function for Input A & B Time Base Characteristics General FC-8150U FC-8030U 9 digit large green LED display, Overflow, Gate time, mhz, Hz, khz, MHz, ns, us, ms, S, HOLD Range Input A & B 0.1Hz - 100MHz 0.1Hz - 100MHz input C 80MHz~1.5GHz 80MHz~3.0GHz Gate Time 0.01Sec, 0.1Sec, 1Sec, 10Sec 1mHz to 10Hz ±±Timebase Error±1count Terminal A, B, C Input A & B 30mVrms 30mVrms Sensitivity 25mVrms(80MHz-150MHz) Input C 30mVrms 20mVrms(150MHz-2.0GHz) 60mVrms(2.0GHz-3.0GHz) Impedance A & B Input : 1 MΩ, 40pF, C input : 50Ω Max. Input Voltage A & B Input : 250mVrms, C input : 3Vrms Attenuator A & B Input : x1, x10 Slope A, B Trigger A Low Pass Filter Range Period Totalize Time Interval (A to B) Ratio (A / B) Internal Timebase Frequency Standard Output External Standard Input Count Capa. Range L.S.D Display Range L.S.D. Display Frequency Aging Rate Temp.Stability Line Voltage Frequency Amplitude Impedance Frequency Input Level Impedance Power Operation Temperature Dimension Weight Standard Accessories +, - Selectable Preset or Variable A & B Input : 100kHz, -3dB 10mSec to 10Sec 1pSec to 1nSec depending on Gate time and input Signal ±±Trigger Error±1count Range 5Hz to 10MHz DC to 30MHz 0 to (Max) 10mSec to 10Sec 100mSec +/- L.S.D. +/- Trigger Error +/- +/- 1count 0.1Hz to 100MHz A x N/B,N = 1 to /- 1 Count of A +/- B Trigger Error +/- A 10MHz TCXO Less than 5x10-6 /month Less than 5 x10-6 (0 to +50 ) Less than 1x10-6 for 10% variation 10MHz 1.5Vp-p 600 Ω 10MHz 1.5Vrms to 5Vrms 600 Ω 115 or 230VAC +/- 10%,48 to 66Hz 0 to 50 ( specified at 25 ±5 ) 240(W) x 270(D) x 90(H)mm Approx. 2.5Kg Power cord,bnc cable, Fuse, Instruction manual 60

64 1.5GHz~3.7GHz FREQUENCY COUNTER FC 8150 & FC 8300 FC-8300 FC-8150 Features Frequency measuring range MODEL FREQUENCY FREQUENCY INPUT A INPUT C FC Hz - 100MHz 80MHz~1.5GHz FC Hz - 100MHz 80MHz~3.7GHz 10MHz TCXO Internal Time Base Period and Total measurement for input A RPM measurement for input A 9 Digit display with 0.01 mhz resolution in 1 Sec. (By Ext. Reference Signal) RS-232C serial interface function for communicating with computer High sensitivity External reference input function( Higher than 1.5 Vrms) Reciprocal technique for high resolution at low counting frequencies Self check function executed to perform a automatic self diagnosis of various counter function Push-scanning for selecting Function and Gate time Low-pass filter(100 khz, -3 db) installed for removing noise signal in low frequency measuring AC/DC coupling function ( Selectable AC/DC Coupling ) 10:1 Input Attenuation ( Selectable x1/x10 Attenuator ) Data hold function 61

65 Technical Specification Model FC-8150 FC 8150 & FC 8300 FC-8300 Display Frequency Measurement Input Characteristics Multi Function for input A Time Base Characteristics General 9 digit large green LED display, Overflow, Gate time, mhz, Hz, khz, MHz, ns, us, ms, S, HOLD Range Input A 0.1Hz - 100MHz 0.1Hz - 100MHz input C 80MHz~1.5GHz 80MHz~3.7GHz Gate Time 0.01Sec, 0.1Sec, 1Sec, 10Sec 1mHz to 10Hz ±±Timebase Error±1count Terminal A, C Input A 30mVrms 30mVrms 10mVrms(80MHz-2.0GHz) Sensitivity 20mVrms(2.0GHz-3.0GHz) Input C 30mVrms 30mVrms(3.0GHz-3.2GHz) 40mVrms(3.2GHz-3.5GHz) 70mVrms(3.5GHz-3.7GHz) Impedance A Input : 1 MΩ, 40pF, C input : 50Ω Max. Input Voltage A Input : 250mVrms, C input : 3Vrms Attenuator A Input : x1, x10 Low Pass Filter A Input : 100kHz, -3dB Range 10mSec to 10Sec Period 1pSec to 1nSec depending on Gate time and input Signal ±±Trigger Error±1count Totalize Range 5Hz to 10MHz Count Capa. 0 to (Max) RPM 6 RPM to 900 x 10 6 RPM Internal Timebase Frequency Standard Output External Standard Input Frequency Aging Rate Temp.Stability Line Voltage Frequency Amplitude Impedance Frequency Input Level Impedance 10MHz TCXO Less than 5x10-6 /month Less than 5 x10-6 (0 to +50 ) Less than 1x10-6 for 10% variation 10MHz 1.5Vp-p 600 Ω 10MHz 1.5Vrms to 5Vrms 600 Ω Power 115 or 230VAC +/- 10%,48 to 66Hz Operation Temperature 0 to 50 ( specified at 25 ±5 ) Dimension 240(W) x 270(D) x 90(H)mm Weight Approx. 2.5Kg Standard Accessories Power cord,bnc cable, Fuse, Instruction manual 62

66 4 ⅞ DIGIT BENCH TRUE RMS DIGITAL MULTIMETER DM-1170A DM 1170A Features Large LCD, count Dual-display, Analog bar 21 sets 50 measuring functions, with basic DCV, ACV, DCA, ACA, Ω, CAP, Hz, TEMP, diode and Continuity measuring function, etc. 18 types of frequency, frequency up to 80MHz, 1800 waveform outputs, 0.1%~99% duty cycle. Simultaneous measure (AC+DC), (AC+Hz), (DC+dBm), (dbm+hz), (Hz+Duty), ( + ) Auto data update and refresh, auto data hold, auto peak hold 36-hour dynamic record: MAG, MIN, AVG, MAX-MIN (REL ), (REL%), setting upper & lower limit, timing measurement AC measuring adopts highly accurate true RMS measurement, with testing frequency bandwidth and AC+DC measuring, capable of accurate true RMS measuring of any waveforms in AC range RS-232 interface RS-232 to USB cable provided 63

67 Technical Specification DM 1170A Voltage Range Measurement type Current Range Measurement type Resistance Frequency Capacitance Temperature Square wave output Special functions Overload protection General Display Counts Input Impedance AC frequency response Sampling rate Range selection Interface Power source Accessories Dimension (WxHxD) Weight DC mV, mV, V, V, V, V AC mV, mV, V, V, 750.0V True RMS DC ±(0.05% reading+5 digits) AC ±(0.8% reading+50 digits) DC mA, mA, A, A AC mA, mA, A, A True RMS DC ±(0.2% reading+10 digits) AC ±(0.8% reading+20 digits) Ω, kΩ, kΩ, kΩ, MΩ, MΩ ±(0.3% reading+5 digits) 0.50Hz~8.0000MHz ±(0.03% reading+2 digits) 1.000nF, 10.00nF, 100.0nF, 1.000uF, 10.00uF, 100.0uF ±(2.5% reading+50 digits) ~ / ~ ±(2.0% reading+2 digits) 3V / 0.5Hz~5kHz / 1%~99% ±0.02% Diode test, AC+DC, Continuity 250V RMS Large backlit LCD, 2 parameters MΩ 40Hz-50kHz 4 times/s; Analog bar 40 times/s Manual range or Auto range RS-232 interface AC115V/230V±10% selectable, 50/60Hz Power cord x1, Operation manual x1, RS-232 cable x1, Software CD x1, Test lead x1, Temperature probex1 260x110x385mm Approx. 3kg 64

68 BENCH 4 ½ DIGIT DIGITAL & 4 ⅞ DIGIT MULTIMETER TRUE RMS BENCH DIGITAL MULTIMETER DM 1140B & DM 1150B DM-1150B DM-1140B Features Features 4 ⅞ DIGIT Large LCD, count Dual-display AND Analog bar 21 sets 50 measuring functions, with basic DCV, ACV, DCA, ACA, Ω, CAP, Hz, TEMP, diode and Continuity measuring function, etc. 18 types of frequency, frequency up to 80MHz, 1800 waveform outputs, 0.1%~99% duty cycle. Simultaneous measure (AC+DC), (AC+Hz), (DC+dBm), (dbm+hz), (Hz+Duty), ( + ) Auto data update and refresh, auto data hold, auto peak hold 36-hour dynamic record: MAG, MIN, AVG, MAX-MIN (REL ), (REL%), setting upper & lower limit, timing measurement AC measuring adopts highly accurate true RMS measurement, with testing frequency bandwidth and AC+DC measuring, capable of accurate true RMS measuring of any waveforms in AC range RS-232 interface 4 ½-digit (19999count), bench type, large LCD of white backlight, easy to read Manual Range operation Sample Rate : 3 times per sec Overload protection With basic DCV, ACV, DCA, ACA, Ω, CAP, Hz, hfe, Diode and Continuity measuring functions. Voltage test range up to 1000V DC or peak-peak value AC, resolution up to 10uV. Current test range up to 20A, auto polarity shift, data hold AC measuring adopts high accuracy true RMS, measuring broadband and AC+DC function, enabling accurate measuring of virtual value of AC by any waveform 65

69 Technical Specification DM 1140B 66

70 Technical Specification DM 1150B Spec. Range Remarks 80mV 1μV ±(3% rdg+10) 800mV 10μV Input impedance : 8V 0.1mV ±(0.05% rdg+5) DCV 80mV~800mV: >1000MΩ; 80V 1mV 8V~1000V: 10MΩ. 800V 10mV ±(0.08% rdg+10) 1000V 0.1V 80mV 1μV <75% Range: <75% Range: >75% Range: 50H z~20kh z 20kH z~50kh z 50Hz~20kHz Input impedance : 800mV 10μV 80mV~800mV: >1000MΩ; ACV(T-RMS) 8V 0.1mV ±(0.8% rdg+50) ±(6.0% rdg+50) ±(8.0% rdg+50) 8V~1000V: 10MΩ. 80V 1mV 750V 10mV ± (0.8% rdg+50) (at <90% Range), 50Hz~1kHz Parallel capacitance: <100pF ± (5.0% rdg+50) (at >90% Range), 50Hz~1kHz DCA 80mA 1μA Fuse: F750Ma/250v F13A/250V ±(0.2% rdg+10) 800mA 10μA Voltage drop: 800mV 8A 0.1mA M ax.input current: 20A ±(0.5% rdg+10) 20A 1mA (up to15 seconds) ACA(T-RMS) 80mA 1μA Fuse: F750Ma/250v F13A/250V ±(0.2% rdg+10) / 50Hz~5kHz 800mA 10μA Voltage drop: 800mV 8A 0.1mA M ax.input current: 20A ±(0.5% rdg+10) / 50Hz~500Hz 20A 1mA (up to15 seconds) 800Ω 0.01Ω ±(0.3% rdg+10) 8kΩ 0.1Ω Resistance 80kΩ 1Ω ±(0.3% rdg+5) Overload protection: 250V RMS 800kΩ 10Ω Sensitivity : 0.7V RMS 8MΩ 100Ω 80MΩ 1kΩ 0Ω~40MΩ: ±(2.5% rdg+10) 40MΩ~80MΩ: ±(3.5% rdg+10) Hz 0.01Hz kHz 0.1Hz Overload protection: 250V RMS kHz 1Hz ±(0.5% rdg+5) Frequency kHz 10Hz MHz 100Hz 10.0MHz 1kHz 100.0MHz 10kHz ±(0.1% rdg+5) Plus adapter(optional) MHz 100kHz 1nF 1pF ±(5.0% rdg+50) 10nF 10pF Capacitance 100nF 100pF 1μF 1nF ±(2.5% rdg+50) Overload protection: 250V RMS 10μF 10nF 100μF 100nF Diode V V ±(3.0% rdg+5) Diode positive voltage drop Overload protection: 250V RMS Temp. 50 ~ K type thermocouple ±(1.5% rdg+10) 58 ~ Overload protection: 250V RMS dbm dBm~ dBm 0.01dBm ±1.0% rdg Square Wave Output Voltage amplitude : Approx.3V / Frequency : 0.5Hz~5000Hz / Duty cycle : 1%~99% 67

71 HANDHELD 3 ½ DIGIT HANDHELD DIGITAL MULTIMETER DIGITAL MULTIMETER DMM 188 Features 3 ½-digit Manual Range Digital Multimeter Large LCD makes reading easy and clear Strong anti-magnetic and anti-jamming performance Auto power off within 30 minutes Full protection function, anti high voltage circuit design (voltage dependent resistor 1300V) Unit and function symbols display Capacitance test range up to 2000Uf Self-discharge when capacitance measuring Peak value hold Frequency auto ranging, up to 10MHz Technical Specification Model DMM 188 Basic function Range DCV 200mV/2V/20V/200V/1000V ±(0.5%+3) ACV 200mV/2V/20V/200V/750V ±(0.8%+5) DCA 2mA/20mA/200mA/20A ±(0.8%+3) ACA 2mA/20mA/200mA/20A ±(1.0%+5) Resistance 200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ/2000MΩ ±(0.8%+3) Inductance 2mH/20mH/200mH/2H/20H ±(3.0%+10) Capacitance 20nF/200nF/2uF/20uF/2000uF ±(3.0%+10) Frequency 2kHz/20kHz/200kHz/2000kHz/10MHz ±(0.5%+4) Temperature -40 ~1000 ±(0.8%+4) Special function Diode test hfe test Continuity alarm <30Ω±10Ω Low battery indication Approx. <7.5V Data hold Peak value hold Auto power off Approx. 30 minutes Function protection Anti-shock protection Input impedance 10MΩ Sampling rate 3 times/s AC frequency response Hz Range selection Manual range (Frequency: Auto range) Max. display 1999 LCD size 65 41mm Battery 9V 6F22 Power dissipation Quiescent current approx. 6mA Meter size mm Net weight 290g(including battery) 68

72 BENCH 3 ¾ DIGIT DIGITAL & 3 ⅚ DIGIT MULTIMETER HANDHELD DIGITAL MULTIMETER DMM 197 & 199 Technical Specification Features 4000/6000 Auto Range Digital Multimeter DMM /4-digit 4000 counts DMM /6-digit 6000 counts Large LCD makes, Unit and function symbols display, easy and clear reading Strong anti-magnetic and anti-jamming performance Auto power off within 15 minutes Full protection function Capacitance test range up to 2000uF (Model 199) Relative value, frequency/duty cycle measuring, data hold Model Basic function DCV Range 400mV/4V/40V/400V/1000V ±(0.5%+4) DMM 197 DMM mV/6V/60V/600V/1000V ±(0.5%+3) ACV DCA ACA Resistance Capacitance 400mV/4V/40V/400V/750V ±(0.8%+6) 6V/60V/600V/750V ±(0.8%+5) 400uA/4000uA/40mA/400mA/4A/20A ±(1.0%+5) 600uA/6000uA/60mA/600mA/6A/20A ±(1.0%+3) 400uA/4000uA/40mA/400mA/4A/20A ±(1.5%+5) 600uA/6000uA/60mA/600mA/6A/20A ±(1.2%+5) 400Ω/4kΩ/40kΩ/400kΩ/4MΩ/40MΩ ±(0.8%+1) 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/40MΩ ±(0.8%+3) 4nF/40nF/400nF/4uF/40uF/400uF/200uF ±(2.5%+6) 40nF/400nF/4uF/40uF/400uF/2000uF ±(2.5%+5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/30MHz ±(0.5%+4) ±(0.5%+4) Temperature 0 ~1000 ±(0.8%+4) ±(0.8%+4) 0 ~1832 ±(0.8%+5) Special function Diode test hfe test Analog bar Continuity <50Ω±10Ω <30Ω±10Ω Low battery Data hold Approx. <2.4V MAX, MIN, HOLD Auto power off Function Anti-shock Input Sampling rate AC frequency Approx.15 minutes 10MΩ 3 times/s 40~400Hz Range Manual range or Auto range Max. display LCD size Battery Power Accessories Meter size & 65 41mm 2 1.5V AAA Quiescent current approx. 2mA Test lead, Battery, User manual, Temperature probe mm, 290g (including battery) 69

73 60MHz~200MHz DIGITAL STORAGE OSCILLOSCOPE DS 1065/1100/1200 Features MODEL BANDWIDTH SAMPLING RATE DS MHz 500MSa/s DS MHz 1GSa/s DS MHz 1GSa/s 60MHz/100MHz/200MHz bandwidth 500MS/s to 1GS/s real-time sample rate 50GS/s sample rate for repetitive waveforms 1M Memory 2mV/div to 50V/div Vertical Sensitivity High resolution color LCD display USB storage, RS232C, optional J45 interface 4000 point record length for each channel Multi-waveforms math, FFT Function Built-in delay sweep function Automatic Multi-waveform Measurement Cursor & Track measurement Waveform Record & Recall Trigger Mode for Edge, Video, Pulse Width, Slope & Alternate Pass & Failure for ordinary setting and waveform setting Calibration Signal with optional frequency of 1KHz,10KHz &100KHz 10 groups of waveform storage, CSV storage, 10 groups of setting and position storage Technical Specification Model DS-1065 DS-1100 DS-1200 Vertical system Bandwidth 60MHz 100MHz 200MHz Channel Vertical Vertical Sensitivity Simulation bandwidth Rising time 5.8ns CH1, CH2 8 bit 2mV/div -50V/div, step -3dB 3.5ns 1.8ns Input impedance Max safe input voltage 1MΩ ±2%, 20pF±5 400V(DC+AC peak) / Frequency 400Hz (when input impedance is 1MΩ) 70

74 DS 1065/1100/1200 Model DS-1065 DS-1100 DS-1200 Horizontal system Mode CH1, CH2, CH1±CH2, CH1 CH2, CH1/CH2, FFT Sampling Rate 500MS/s 1GS/s 1GS/s Equivalent sampling rate 50GS/s 50GS/s 50GS/s Waveform interpolation Record length Sin(x)/x 4kB/CH, expandable to 256MB or 512MB Horizontal working mode Primary sweep, primary sweep + delay expansion sweep and X-Y / Timebase range 50s/div~10ns/div 50s/div~5ns/div 50s/div~1ns/div Timebase accuracy ±100ppm X-Y X (CH1) frequency bandwidth : DC ~ full bandwidth (-3dB) Phase potential difference : 3 when 5MHz Trigger Trigger source CH1, CH2, EXT, city electricity inner: 1div (frequency upper limit is 40MHz) 2div (frequency is more than 40MHz) Trigger sensitivity 2div, V, T, 1/ T out : 100mVp-p frequency upper limit is 40MHz 200mVp-p frequency is more than 40MHz 200mVp-p, TV-V, TV-H video trigger Auto trigger range Trigger level range Trigger mode Cursors Measurement Auto measure Display Display Display screen Display type Display mode General Output interface Storage Power supply Temperature Humidity Size & Weight 100Hz~100MHz square signal Int. trigger:±4div / Ext. trigger:±1.6v Edge trigger : Rise along, drop along Impulse trigger : More than, equal to and less than setting pulse width. Video trigger : TV-V, TV-H Slope trigger :more than, equal to and less than setting time V, T, 1/ T Voltage parameter : Max, Min, peak-peak value, top value, bottom value, amplitude value, root-mean-square value, average value, overshot, pre-shot, damp. Time parameter : cycle, frequency, rising time, fall time, positive pulse width, negative pulse width, positive ratio, negative ratio, delay inch color LCD display 320pixel(horizontal) 234pixel (vertical) dot, vector Normal, Flat, Average, Peak value, Afterglow USB, RS232, J45 Ethernet interface(optional) Setting / Waveform storage : 10 groups AC 100V~240V ±10% / 45Hz~440H / about 25W Working: 0 ~+40 / Storage : -40 ~+60 Working : 40 / (20~90)%RH / Storage : 50 / 90%RH, 24h 300mm 150mm 130mm, 2.5Kg (net weight) 71

75 30MHz~100MHz REALTIME OSCILLOSCOPE OS 9030A/9060A/9100A OS-9030A Features DC to 30MHz bandwidth 2 Channel, Dual Trace High sensitivity up to 1mV Auto triggered sweep in full range Flexible trigger source select Alternate trigger function Trigger signal output Sweep rate : 0.1uS/div to 0.2s/div Max. input voltage : 400V(DC+ACp-p) Features DC to 60MHz Bandwidth 2 Channel, Dual Trace High sensitivity up to 1mV/div High light graduation illumination Displayed x1 and Mag trace after Mag. Stable TV-H & TV-V signal Auto focus Trigger level lock OS-9060A Features OS-9100A DC to 100MHz bandwidth A & B dual time base sweep displayed sync. High sensitivity up to 1mV/div Magnification setting for T of main sweep A via delay sweep B Hold off function Fine outline & high performance ratio Sweep rate : 0.1uS/div to 0.2s/div Max. input : 400V(DC+ACpeak) at AC freq 1KHz 72

76 Technical Specification OS 9030A/9060A/9100A Model OS-9030A OS-9060A OS-9100A Vertical system Bandwidth (-3dB) DC : 0~30MHz DC : 0~60MHz DC : 0~100MHz AC : 10Hz~30MHz AC : 10Hz~60MHz AC : 10Hz~100MHz Bandwidth at MAG (-3dB) DC : 0~5MHz AC : 10Hz~5MHz DC : 0~7MHz AC : 10Hz~7MHz DC : 0~15MHz AC : 10Hz~15MHz Mode CH1,CH2,ALT,CHOP,ADD,X-Y CH1, CH2, ADD, DUAL (CHOP, ALT) Deflection Factor 5mV/div ~ 10V/div in 5mV/div to 5V/div step, 10 steps step, 11 steps, ±5% (1mV/div to 1V/div at 5 MAG) Rising Time 12ns, 70ns by MAG 6ns 3.5ns Overshoot 5% 8% Input Impedance 5% 1MΩ ±2%, 25pF±3pF Input Coupling AC-GND-DC Maxium Input Voltage 400V(DC+AC peak) 300V(DC+AC peak) 400V(DC+AC peak) Polarity Inverter CH1 Input Amplifier CH2 only Output voltage Minimum 20mV/div Minimum 20mV/div Output impedance Approximately 50Ω Approximately 50Ω Band width 50Hz to 5MHz (-3dB) 50Hz to 5MHz (-3dB) Time Axis Sweep mode 1, 5 ; 1, 5ALT 1, 5 ; 1, 5ALT A, B, B TRIG D, X-Y, ALT Sweep time 0.1μs to 0.2s/div±5% 0.1μs to 0.2s/div±5% A: 0.05μs to 0.2s/DIV±5% B: 0.05μs to 10s/DIV±5% Sweep expansion 10ns/div to 20ms/div 10ns/div to 20ms/div 10 MAG: 8% Delay System Continuous or Triggering Delay Time Hold-off 0.2μs~2s Continuous change for 2 times Trigger Trigger source CH1,CH2,ALT,LINE,EXT INT, CH2, LINE, EXT Trigger Mode AC/DC(EXT), NORM/TV AUTO, NORM, TV-V,TV-H Polarity Trigger Value +,- 5Hz ~ 30MHz DC~60MHz DC~100MHz INT: 1div / EXT: 0.2Vp-p INT : 2div / EXT : 0.5V INT : 2div / EXT : 0.5V TV Sync INT: 2div EXT: 0.3Vp-p INT: 2div EXT: 1Vp-p INT: 2div EXT: 1Vp-p Ext. Trig 1±5%MΩ 30pF Horizontal system Sweep Mode AUTO, TRIG, LOCK, SINGLE A, B, B TRIG D, X-Y, ALT Sweep Time Factor 0.1μs/div~0.2s/div in A : 0.05uS/div ~ 0.2S/div ±5%, 1-2-5, 21 steps sequence B : 0.05uS/div ~ 10uS/div ±5%, 1-2-5, 8 steps Sweep Mag 10 MAG: 5% Delay Time 0.2μs~2s Hold-off Continuous or trigged X-Y Signal Input Deflection Frequency response AC: 10Hz~1MHz -3dB DC: 0~1MHz 3dB X-Axis: CH1 Y-Axis: CH2 Same as Vertical System DC~2MHz DC~2MHz Input Impedance 5% 1MΩ±2%, 25pF±3 pf X-Y phrase error 3 (DC~50kHz) 3 (DC~50kHz) 3 (DC~100kHz) Z-Axis System Maxium Input Voltage 50V(DC+ACp-p) 30V(DC+ACp-p) 30V(DC+ACp-p) Input Impedance 10kΩ 33kΩ 40kΩ Frequency DC ~5MHz DC ~ 2MHz DC ~ 2MHz CRT Type Effective Screen 6 inch square internal scale 8cm 10cm(1cm=1div) 73

77 FM/AM SYNTHESIZED SIGNAL GENERATOR SG 1501B & SG 1710 The model SG 1501B is synthesized Signal Generator which has frequency range from 100kHz to 150MHz. It generates CW and FM/AM modulation signals, its output range is from 20dBμto126dBμ. This advanced FM/AM signal generator can be controlled by external equipment through GPIB interface. Features SG-1501B High accuracy with 100Hz in full range Output level can be specified by 0.1dB step between -20dBμ to 126dBμ. Presetting function for simple operation. STEREO Function Compact size and light weight. Crystal oscillator stability : (5ppm) GPIB Interface (Option) The model SG 1710 is a high performance general purpose 200kHz to 1000MHz synthesized signal generator with low phase noise and very good FM/AM capability. The product is designed for manual as well as ATE applications and is ideally suited for various test tasks during product development and manufacturing of RF products such as cellular radios or cordless phones. Features SG-1710 High performance frequency synthesis using DDS. High resolution output frequency, 1Hz FM deviation up to 100kHz AM up to 100% Wide range output for receiver test : 127dBm ~ 13dBm Reverse Power Protection ( RPP ) 25W max. Store-recall up to 300 front panel settings. Standard GPIB & RS-232C Interface 74