MUSES8832. Rail-to-Rail Output, High Quality Audio, Dual Operational Amplifier. MUSES and this logo are trademarks of New Japan Radio Co., Ltd.
|
|
- Abner Wilkinson
- 5 years ago
- Views:
Transcription
1 MUSES Rail-to-Rail Output, High Quality Audio, Dual Operational Amplifier GENERAL DESCRIPTION The MUSES is a Rail-to-Rail output High quality audio operational amplifier, which is optimized for high-end audio and portable audio applications. The MUSES features.nv/ Hz low noise, MHz wide gain bandwidth,.9% low distortion, Ω drive capability, - C to + C operating temperature range, and various reliabilities and conveniences are improved. It is the best for audio preamplifiers, active filters, microphone amplifiers, and line amplifiers with excellent sound. FEATURES Operating Voltage +.V to +V ±.V to ±.V Low Noise.nV/ Hz typ. at f=khz.μvrms typ. (Hz to khz) Output Current ma typ. (Capability of driving Ω loads) GBW MHz typ. Low Distortion.9% typ. at V+=+V, Vo=.Vrms Slew Rate Bipolar Technology Package Outline V/µs typ. Operating Temperature Range - to + C APPLICATIONS Portable Audio Home Audio PC Audio Car Audio SOP JEDEC mil, SSOP-A DFN-W (ESON-W) (.mm x.mm) PACKAGE OUTLINE MUSESE (SOP JEDEC mil (EMP)) MUSESKW (DFN-W (ESON-W)) PIN CONFIGLATION A B DFN-W (ESON-W) Top View SOP JEDEC mil, SSOP-A A B MUSESVA (SSOP-A). A OUTPUT. A -INPUT. A +INPUT. V-. B +INPUT. B -INPUT. B OUTPUT.V+ Bottom View Exposed Pad About Exposed Pad Connect the Exposed Pad on the GND. I/V Digital Input DA Converter I/V LPF Buff Analog Output DAC Output I/V converter + LPF circuit MUSES and this logo are trademarks of New Japan Radio Co., Ltd. Ver
2 MUSES ABSOLUTE MAXIMUM RATINGS (Ta= C) PARAMETER SYMBOL RATING UNIT Supply Voltage V + (V + /V - ) + (.) V Input Voltage V IN + (Note) V Differential Input Voltage V ID V Power Dissipation P D SOP JEDEC mil: 9 SSOP-A: (Note) DFN-W: (Note) mw : (Note) Operating Temperature Range T opr - to + C Storage Temperature Range T stg - to + C (Note) For supply Voltages less than + V, the maximum input voltage is equal to the Supply Voltage. (Note) EIA/JEDEC STANDARD Test board (. x. x.mm, layers, FR-) mounting. (Note) EIA/JEDEC STANDARD Test board (. x. x.mm, layers, FR-) mounting. The PAD connecting to GND in the center part on the back (Note) EIA/JEDEC STANDARD Test board (. x. x.mm, layers, FR-, Applying a thermal via hole to a board based on JEDEC standard JESD-) mounting. The PAD connecting to GND in the center part on the back RECOMMENDED OPERATING CONDITION (Ta= C) PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Supply Voltage V V V + /V V ELECTRIC CHARACTERISTICS V + = +V, V - =V, Ta= C, R L to V + /, unless otherwise specified PARAMETER SYMBOL TEST CONDITION MIN. TYP. MAX. UNIT Supply Current I CC No Signal, R L = -. ma Power Dissipation P D No Signal -. mw Input Offset Voltage V IO Rs= -.. mv Input Bias Current I B -. μa Input Offset Current I IO - na Open-Loop Voltage Gain A V R L =k to V+/, V O =. to.v 9 - db Common Mode Input Voltage Range V ICM CMR 9dB. -. V Common Mode Rejection Ratio CMR R S =Ω 9 - db Supply Voltage Rejection Ratio SVR R S =Ω 9 - db Maximum Output Voltage Maximum Output Voltage R L =kω to V V R L =kω to V -.. V R L =Ω to V + /..9 - V R L =Ω to V + / -.. V Output Source Current I SOURCE V O =V + -.V - ma Output Sink Current I SINK V O =.V - ma Gain Bandwidth Product GBW f=khz - - MHz Slew Rate SR R L =kω - - V/μs Total Harmonic Distortion + Noise THD+N Gain=,V O =.Vrms,R L =kω,f=khz % Channel Separation CS Gain=, R S =kω, R L =kω, f=khz - - db Input Noise Voltage e n f=khz -. - nv/ Hz Input Noise Voltage V n f=hz to khz -. - μvrms - - Ver.9.
3 MUSES NOTE. The closed gain should be db or higher to prevent the oscillation. Unity gain follower application may cause the oscillation.. Minimize the load capacitor for the better performance. A large load capacitor CL reduces the frequency response and causes oscillation or ringing.. Be careful to the circuit of high impedance. Input bias current influences an input noise and output offset voltage. POWER DISSIPATION vs. AMBIENT TEMPERATURE IC is heated by own operation and possibly gets damage when the junction power exceeds the acceptable value called Power Dissipation P D. The dependence of the MUSES P D on ambient temperature is shown in Fig. The plots are depended on following two points. The first is P D on ambient temperature ºC, which is the maximum power dissipation. The second is W, which means that the IC cannot radiate any more. Conforming the maximum junction temperature Tjmax to the storage temperature Tstg derives this point. Fig. is drawn by connecting those points and conforming the P D lower than ºC to it on ºC. The P D is shown following formula as a function of the ambient temperature between those points. Dissipation Power P D = Tjmax - Ta ja [W] ( to Ta=ºC) Where, ja is heat thermal resistance which depends on parameters such as package material, frame material and so on. Therefore, P D is different in each package. While, the actual measurement of dissipation power on MUSES is obtained using following equation. (Actual Dissipation Power) = (Supply Current Icc) X (Supply Voltage V + V-) (Output Power Po) The MUSES should be operated in lower than P D of the actual dissipation power. To sustain the steady state operation, take account of the Dissipation Power and thermal design. Fig DFN-W layers Power Dissipation Pd [mw] SOP SSOP-A DFN-W layers Ambient Temperature Ta [ C] Ver
4 MUSES PACKAGE OUTLINE (ESON-W) - - Ver.9.
5 MUSES TYPICAL CHARACTERISTICS (V - =V, V CM =V + /, unless otherwise specified) Equivalent Input Noise Voltage [nv/ Hz] Equivalent Input Noise Current [pa/ Hz] Voltage Noise Density / Current Noise Density vs. Frequency, R L =kω, Current Noise Voltage Noise k k k THD+N [%]... THD+N vs. Output Voltage V + =V, R L =kω, Gain=, f=khz f=khz f=hz f=hz... Output Voltage [Vrms] THD+N vs. Output Voltage, R L =kω, Gain=, THD+N vs. Output Voltage V + =.V, R L =kω, Gain=,.. THD+N [%].. f=khz f=hz f=hz f=khz THD+N [%].. f=khz f=khz f=hz f=hz... Output Voltage [Vrms]... Output Voltage [Vrms] db Voltage Gain/Phase vs. Frequency V + =V, G V =db, R L =kω, C L =pf db Voltage Gain/Phase vs. Frequency V + =V, G V =db, R L =kω, Gain Ta=-ºC Phase - Ta=-ºC k k k M M M Phase [deg] Gain C L =pf C L =pf Phase C L =pf C L =pf - C L =pf - - k k k M M M Phase [deg] Ver
6 MUSES TYPICAL CHARACTERISTICS (V - =V, V CM =V + /, unless otherwise specified) db Voltage Gain/Phase vs. Frequency, G V =db, R L =kω, C L =pf db Voltage Gain/Phase vs. Frequency, G V =db, R L =kω, Gain Ta=-ºC Phase - Ta=-ºC k k k M M M Phase [deg] Gain C L =pf C L =pf Phase C L =pf C L =pf - C L =pf - k k k M M M Phase [deg] db Voltage Gain/Phase vs. Frequency V + =.V, G V =db, R L =kω, C L =pf db Voltage Gain/Phase vs. Frequency V + =.V, G V =db, R L =kω, Gain Ta=-ºC Phase - Ta=-ºC k k k M M M Phase [deg] Gain C L =pf C L =pf Phase C L =pf C L =pf - C L =pf - k k k M M M Phase [deg] db Voltage Gain vs. Frequency G V =db, R L =kω,, C L =pf V + =V V + =.V - k k M M db Voltage Gain vs. Frequency G V =db, R L =kω,, C L =pf V + =V V + =.V - k k M M - - Ver.9.
7 MUSES TYPICAL CHARACTERISTICS (V - =V, V CM =V + /, unless otherwise specified) Common-Mode Rejection Ratio [db] CMR vs. Frequency V + =V V + =.V k k k M M Supply Voltage Rejection Ratio [db] SVR+ SVR vs. Frequency SVR- k k k M M Channel Separation vs. Frequency Pulse Response, Gain=+, R L =kω, C L =pf Channel Separation [db] V + =V Voltage [.V/div] Ta=-ºC k k k M M Time [μs/div] Voltage [.V/div] Pulse Response, Gain=+, R L =kω, C L =pf C L =pf Supply Current [ma] Supply Current vs. Supply Voltage V CM =V + / Ta=-ºC Time [μs/div] Supply Voltage V + [V] Ver
8 MUSES TYPICAL CHARACTERISTICS (V - =V, V CM =V + /, unless otherwise specified) Supply Current vs. Temperature V CM =V + /. Input Offset Voltage vs. Supply Voltage V CM =V + / Supply Current [ma] V + =V V + =.V Input Offset Voltage [mv] Ta=-ºC - - Ambient Temperature [ºC] Supply Voltage V + [V]. Input Offset Voltage vs. Temperature V CM =V + /. Input Offset Voltage vs. Common-Mode Input Voltage V + =V Input Offset Voltage [mv] V + =.V V + =V Input Offset Voltage [mv] Ta=-ºC Ambient Temperature [ºC] -. Common-Mode Input Voltage [V]. Input Offset Voltage vs. Common-Mode Input Voltage. Input Offset Voltage vs. Common-Mode Input Voltage V + =.V Input Offset Voltage [mv] Ta=-ºC Input Offset Voltage [mv] Ta=-ºC Common-Mode Input Voltage [V] Common-Mode Input Voltage [V] - - Ver.9.
9 MUSES TYPICAL CHARACTERISTICS (V - =V, V CM =V + /, unless otherwise specified) Input Bias Current [μa] Input Bias Current vs. Temperature V CM =V + / V + =.V V + =V - - Ambient Temperature [ºC] Input Offset Current [na] 9 Input Offset Current vs. Temperature V CM =V + / V + =.V V + =V - - Ambient Temperature [ºC] Input Bias Current vs. Common-Mode Input Voltage V + =V, V CM =V + / Input Bias Current vs. Common-Mode Input Voltage, V CM =V + / Ta=-ºC Ta=-ºC Input Bias Current [μa] Input Bias Current [μa] - Common-Mode Input Voltage [V] Common-Mode Input Voltage [V] Input Bias Current [μa] Input Bias Current vs. Common-Mode Input Voltage V + =.V, V CM =V + / Ta=-ºC Common-Mode Input Voltage [V] Common Mode and Supply Voltage Rejection Ratio [db] 9 Common Mode and Supply Volrage Rejection Ratio vs. Temperature SVR CMR () - - Ambient Temperature [ºC] Ver
10 MUSES TYPICAL CHARACTERISTICS (V - =V, V CM =V + /, unless otherwise specified) Open-Loop Voltage Gain vs. Temperature, R L =kω Output Current vs. Output Voltage V + =V Open-Loop 9 Output Voltage [V] Ta=-ºC - - Ambient Temperature [ºC] Output Current [ma] Output Voltage [V]..... Output Current vs. Output Voltage Ta=-ºC Output Current [ma] Output Voltage [V] Output Current vs. Output Voltage V + =.V Ta=-ºC Output Current [ma] Output Source Current I SOURCE [ma] Output Source Current vs. Temperature V O =V + -.V V + =V V + =.V - - Ambient Temperature [ 度 ] Output Sink Current I SINK [ma] Output Sink Current vs. Temperature V O =V - +.V V + =V V + =.V - - Ambient Temperature [ 度 ] - - Ver.9.
11 MUSES TYPICAL CHARACTERISTICS (V - =V, V CM =V + /, unless otherwise specified) Output Voltage vs. Load Resistance V + =+V, R L connected to V. Output Voltage vs. Load Resistance, R L connected to V Output Voltage [V] Ta=-ºC Ta=-ºC k k Load Resistance [Ω] 9 Output Voltage [mv] Output Voltage [V].. Ta=-ºC.. Ta=-ºC k k Load Resistance [Ω] Output Voltage [mv] Output Voltage [V] Output Voltage vs. Load Resistance V + =+.V, R L connected to V Ta=-ºC Ta=-ºC k k Load Resistance [Ω] Output Voltage [mv] Output Voltage [V] Output Voltage vs. Load Resistance V + /V - =±V, R L connected to V Ta=-ºC Ta=-ºC - k k Load Resistance [Ω] Output Voltage [V] Output Voltage vs. Load Resistance V + /V - =±.V, R L connected to V Ta=-ºC Ta=-ºC -. k k Load Resistance [Ω] Output Voltage [V] Output Voltage vs. Load Resistance V + /V - =±.V, R L connected to V Ta=-ºC Ta=-ºC -. k k Load Resistance [Ω] Ver
12 MUSES APPLICATION CIRCUIT Analog Input Gain Stage Att Buff AD Converter Digital Output Digital Input DA Converter I/V I/V LPF Buff Analog Output (Fig.: ADC Input) (Fig.:DAC Output) HPF DAC (Fig.:DAC LPF Circuit ) NOTE Precaution for counterfeit semiconductor products We have recently detected many counterfeit semiconductor products that have very similar appearances to our operational amplifier MUSES in the world-wide market.in most cases, it is hard to distinguish them from our regular products by their appearance, and some of them have very poor quality and performance. They can not provide equivalent quality of our regular product, and they may cause breakdowns or malfunctions if used in your systems or applications. We would like our customers to purchase MUSES through our official sales channels : our sales branches, sales subsidiaries and distributors. Please note that we hold no responsibilities for any malfunctions or damages caused by using counterfeit products. We would appreciate your understanding. [CAUTION] The specifications on this databook are only given for information, without any guarantee as regards either mistakes or omissions. The application circuits in this databook are described only to show representative usages of the product and not intended for the guarantee or permission of any right including the industrial rights. - - Ver.9.
13 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: NJR: MUSESE MUSESVA MUSESVA-TE MUSESE-TE
MUSES8920. High Quality Audio J-FET Input Dual Operational Amplifier - 1 -
MUSES9 High Quality Audio J-FET Input Dual Operational Amplifier GENERAL DESCRIPTION The MUSES9 is a high quality audio J-FET input dual operational amplifier, which is optimized for high-end audio, professional
More informationNJM8801. High Quality Audio Dual Operational Amplifier FEATURES. EQUIVALENT CIRCUIT ( 1/2 Shown ) -1-
High Quality Audio Dual Operational Amplifier NJM88 GENERAL DESCRIPTION The NJM88 is a high quality audio dual operational Amplifier with bipolar technology, strikes a balance between MUSES technology
More informationMUSES8820. High Quality Audio Dual Operational Amplifier - + PACKAGE OUTLINE
MUSES High Quality Audio Dual Operational Amplifier GENERAL DESCRIPTION The MUSES is a high quality audio operational amplifier, which is optimized for high-end audio and professional audio applications.
More informationHigh Quality Audio, Bipolar Input, Dual Operational Amplifier
MUSES High Quality Audio, Bipolar Input, Dual Operational Amplifier The MUSES is a dual bipolar input high quality audio operational amplifier, which is optimized for high-end audio and professional audio
More informationNJM4582 AUDIO DUAL OPERATIONAL AMPLIFIER
AUDIO DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION is the dual operational amplifier, specially designed for improving the tone control, which is most suitable for the audio application. Featuring noiseless,
More informationHigh Quality Audio, J-FET Input, Dual Operational Amplifier
MUSES High Quality Audio, J-FET Input, Dual Operational Amplifier The MUSES is a dual J-FET input high quality audio operational amplifier, which is optimized for high-end audio and professional audio
More informationNJM4585. Low Noise, Bipolar Input Dual, Audio Operational amplifier EQUIVALENT CIRCUIT PIN CONFIGURATION. FEATURES Designed for High-Quality Sound
Low Noise, Bipolar Input Dual, Audio Operational amplifier DESCRIPTION NJM48 is a low noise bipolar input dual audio operational amplifier featuring.nv/ Hz at khz. The NJM48 features Low distortion, high
More informationNJM2732. Rail-to-Rail Input/Output Dual Operational Amplifier
Rail-to-Rail Input/Output Dual Operational Amplifier NJM7 GENERAL DESCRIPTION The NJM7 is a Rail-to-Rail Input/Output dual operational amplifier featuring low power, low noise and a low voltage operation
More informationNJM2734SCC. Rail-to-Rail Input/Output Quad Operational Amplifier PACKAGE OUTLINE
Rail-to-Rail Input/Output Quad Operational Amplifier GENERAL DESCRIPTION NJM74SCC is a Rail-to-Rail Input/Output quad operational amplifier featuring Low power, low noise and operation from.8v. Rail-to-Rail
More informationNJM2734. Rail-to-Rail Input/Output Quad Operational Amplifier
Rail-to-Rail Input/Output Quad Operational Amplifier NJM2734 GENERAL DESCRIPTION NJM2734 is a Rail-to-Rail Input/Output quad operational amplifier featuring Low power, low noise and operation from.8v.
More informationRail-to-Rail Input/Output Quad Operational Amplifier 8. C OUTPUT 9. C -INPUT 10. C +INPUT 11. GND(V ) 12. D +INPUT 13. D INPUT 14.
Rail-to-Rail Input/Output Quad Operational Amplifier GENERAL DESCRIPTION is a Rail-to-Rail Input/Output quad operational amplifier featuring Low power, low noise and operation from.8v. Rail-to-Rail Input/Output
More informationLow Offset, Low Drift Dual JFET Input Operational Amplifier. NJM2749M, NJM2749AM : DMP8 NJM2749E, NJM2749AE : SOP8 JEDEC 150mil V + OUTPUT B INPUT B
Low Offset, Low Drift Dual JFET Input Operational Amplifier GENRRAL DESCRIPTION The NJM2749/2749A is a Precision dual JFET input operational amplifier which includes low input offset voltage:.8mv (typ)
More informationNJU7046/NJU7047/NJU7048
NJU76/NJU77/NJU7 9V/μs High-Speed, Rail-to-rail I/O CMOS Operational Amplifier FEATURES (V + =V, V - =V, Ta= C) High Slew Rate 9V/µs Wide Bandwidth MHz Low Input Bias Current pa Rail-to-Rail Input and
More informationNJM12904 SINGLE SUPPLY DUAL AMPLIFIER -INPUT +INPUT OUTPUT GND(V-)
NJM1294 SINGLE SUPPLY DUAL AMPLIFIER GENERAL DESCRIPTION The NJM1294 is a single-supply dual operational amplifier, which can operate from 2V supply. The features are low offset voltage, low bias current.
More informationNJM4580 DUAL OPERATIONAL AMPLIFIER
NJM8 DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM8 is a dual operational amplifier, specially designed for improving the tone control, which is most suitable for the audio application. Featuring
More informationNJU7026/NJU7027/NJU7028
NJU76/NJU77/NJU78 μa/ch, Rail-to-Rail Output CMOS Operational Amplifier FEATURES (V + =5V, V - =V, Ta=5 C, typ.) Supply Current (All Amplifiers) NJU76 µa NJU77 6µA NJU78 8µA Supply Voltage.8V to 5.5V Gain
More informationNJM4558C DUAL OPERATIONAL AMPLIFIER V + OUTPUT -INPUT +INPUT V -
NJM48C DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM48C integrated circuit is a dual high-gain operational amplifier internally compensated and constructed on a single silicon chip. Combining
More informationNJM2904C / NJM2904CA SINGLE-SUPPLY DUAL OPERATIONAL AMPLIFIER
NJM94C / NJM94CA SINGLE-SUPPLY DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM94C / NJM94CA consists of two independent, high gain, internally frequency compensated operation amplifiers, which were
More informationNJM8202. Single Supply, Rail-to-Rail Output Dual Operational Amplifier
NJM8 Single Supply, Rail-to-Rail Output Dual Operational Amplifier GENERAL DESCRIPTION The NJM8 is a Rail-to-Rail output single supply dual operational amplifier with a low noise of nv/ Hz (typ. at khz)
More informationNJM2722. Single Ultra-High speed and Wide Band Operational Amplifier
Single Ultra-High speed and Wide Band Operational Amplifier GENERAL DESCRIPTION The NJM2722 is a single, ultra-high speed and wide band operational amplifier that features 1V/μs slew rate and 1ohm load
More informationHigh Quality Audio, J-FET Input, Dual Operational Amplifier
MUSES High Quality Audio, J-FET Input, Dual Operational Amplifier The MUSES is a dual J-FET input high quality audio operational amplifier, which is optimized for high-end audio and professional audio
More informationNJU7076/NJU7077/NJU7078
NJU776/NJU777/NJU778 Precision, Low Noise, Rail-to-Rail Output, CMOS Operational Amplifier GENERAL DESCRIPTION The NJU776/NJU777/NJU778 is a high precision Rail-to-Rail output Single/Dual/Quad CMOS operational
More informationWide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier
NJU777 Wide-Band,High-Speed,Low-Offset,Low-Noise Rail-to-Rail Input/Output CMOS Operational Amplifier GENERAL DESCRIPTION The NJU777 are Rail-to-Rail input/output CMOS single/dual/quad operational amplifiers.
More informationNJU High Output Current, Rail-to-Rail Input/Output Dual CMOS Operational Amplifier
High Output Current, Rail-to-Rail Input/Output Dual CMOS Operational Amplifier NJU779 GENERAL DESCRIPTION The NJU779 is a Rail-to-Rail input and output dual CMOS operational amplifier that features high
More informationNJM2718. Single-Supply High-Operating voltage Dual Operational Amplifier PACKAGE OUTLINE
Single-Supply High-Operating voltage Dual Operational Amplifier GENERAL DESCRIPTION The NJM2718 is a single-supply high-operating voltage dual operational amplifier. It is suitable for high supply voltage
More informationNJM5532C LOW-NOISE DUAL OPERATIONAL AMPLIFIER NJM5532CG (SOP8) FEATURES PIN CONFIGURATION. EQUIVALENT CIRCUIT (Each Amplifier) - 1 -
LOWNOISE DUAL OPERATIONAL AMPLIFIER NJM3C GENERAL DESCRIPTION The NJM3C is a high performance dual low noise operational amplifier. This features low noise performance (nv/ Hz), and considerably higher
More informationNJM2748/2748A. Low Offset, Low Drift single JFET Input Operational Amplifier -1-
Low Offset, Low Drift single JFET Input Operational Amplifier NJM2748/2748A GENERAL DESCRIPTION The NJM2748/2748A is a Precision dual JFET input operational amplifier which includes low input offset voltage:.7mv
More informationHigh Output Current, Rail-to-Rail Input/Output Dual CMOS Operational Amplifier PIN FUNCTION 1. OUTPUT A 2. INPUT A 3. +INPUT A
High Current, Rail-to-Rail / Dual CMOS Operational Amplifier NJU74 GNERAL DESCRIPTION The NJU74 is a Rail-to-Rail / dual CMOS operational amplifier. Based on C-MOS technology, there are excellent features
More informationNJM5532 LOW-NOISE DUAL OPERATIONAL AMPLIFIER
LOW-NOISE DUAL OPERATIONAL AMPLIFIER NJM3 GENERAL DESCRIPTION The NJM3 is a high performance dual low noise operational amplifier. Compared to the standard dual operational amplifiers, such as the NJM,
More informationNJM8512/NJM8513. Precision, JFET Input Operational Amplifier
Precision, JFET Input Operational Amplifier NJM8512/NJM8513 FEATURES Low Input Offset Voltage V IO =4μV max. V IO =7μV max. (Ta= -4 C to +125 C) Low Input Offset Voltage Drift ΔV IO /ΔT=5μV/ C max. (Ta=
More informationNJM2720. Single Ultra-High speed and Wide Band Operational Amplifier
NJM272 Single Ultra-High speed and Wide Band Operational Amplifier GENERAL DESCRIPTION The NJM272 is a single, ultra-high speed and wide band operational amplifier that features 2V/μs slew rate and 1ohm
More informationNJM324C. Low power quad operational amplifiers
Low power quad operational amplifiers Features Wide gain bandwidth:.mhz typ. Input common-mode voltage range includes ground Large voltage gain:db typ. Very low supply current per amplifier:ua typ. Low
More informationNJM2115 DUAL OPERATIONAL AMPLIFIER
NJM5 DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION NJM5 is a low operating Voltage ( ±.V min. ) and low saturation output voltage ( ±.V P-P at supply voltage ±.5V ) operational amplifier.it is applicable
More informationNJM2737. Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier
Low Noise, Rail-to-Rail Input/Output Dual Operational Amplifier GENERAL DESCRIPTION The NJM2737 is a Rail-to-Rail Input/Output single supply dual operational amplifier featuring low voltage operation,
More informationHIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM2742 is a high speed single supply operational amplifier.the low V OL enables to treat small output signal on a single supply.
More informationPrecision Operational Amplifier
Precision Operational Amplifier NJMOP77/NJMOP77 FEATURES Precision V IO =6μV max. V IO =μv max. (Ta= - to +8 ) PACKAGE OUTLINE Low Offset Drift V IO / T=.µV/ max. (Ta= - to +8 ) CMR db min. Low Noise V
More informationNJM13404 SINGLE SUPPLY DUAL OPERATIONAL AMPLIFIER 1 8 A
SINGLE SUPPLY DUAL OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The is single-supply dual operational amplifier, which can operate from V supply. The features are low offset voltage, low bias current, high
More informationHIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER V + B OUTPUT B -INPUT B +INPUT SOP8 SSOP8 MSOP8(VSP8) SOP14 SSOP14
HIGH SPEED SINGLE SUPPLY OPERATIONAL AMPLIFIER FEATURES High Slew Rate 10V/µs High Bandwidth 3MHz High Unity Gain Frequency 3.6MHz Input Offset Voltage 5.5mV max. Single Supply 3V to 36V Operating Temperature
More informationLow power dual operational amplifier
Low power dual operational amplifier NJM58C / NJM58CA Features Internally frequency-compensated Large DC voltage gain : db typ. Wide bandwidth (unity gain ) :.MHz typ. Low Operating Current : 5 ua/ch typ.
More informationLow power quad operational amplifiers
Low power quad operational amplifiers Features Wide gain bandwidth:.mhz typ. Input common-mode voltage range includes ground Large voltage gain:db typ. Very low supply current per amplifier:ua typ. Low
More informationMUSES03. High-Quality Sound, J-FET Input, Single Operational Amplifier for Premium Audio. GENERAL DESCRIPTION
High-Quality Sound, J-FET Input, Single Operational Amplifier for Premium Audio FEATURES High-quality sound Operating Voltage ±3.5V to ±18V Operating Current 5.8mA typ. Low Input Bias Current 5pA typ.
More informationULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM711 is an ultra high speed single operational amplifier. It can swings 6V/µs high slew rate and 1GHz gain band width product(1mhz
More informationSINGLE SUPPLY QUAD OPERATIONAL AMPLIFIER
NJM SINGLE SUPPLY QUAD OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM is single-supply quad operational amplifier, which can operate from V supply. The features are low offset voltage, low bias current,
More informationDual Precision Operational Amplifier
NJM79 Dual Precision Operational Amplifier FEATURES Precision V IO =6µV max. V IO =µv max. (Ta=-ºC to +8ºC) Low Offset Drift V IO / T=.9µV/ºC max. (Ta=-ºC to +8ºC) Specified for ±V and ±V operation CMR
More informationNJU77000/NJU77001 NJU77002/NJU77004
.V,.23µA/ch, Ultralow Power, Rail-to-Rail Input/Output Single/Dual/Quad CMOS Operational Amplifier FEATURES (V + =V) Supply Current NJU77/NJU77.29µA typ..23µa/ch typ. Operating Voltage.V to.v Input Offset
More informationNJM320A/NJM321A. Low power single channel OP-Amp
Low power single channel OPAmp NJMA/NJMA Features Input offset voltage :.mv max. Input offset voltage drift : µv/ typ. Supply current :.ma typ. at Vcc + =V Input bias current : na typ. Input commonmode
More informationPrecision Operational Amplifier
Precision Operational Amplifier NJM79 FEATURES Precision V IO =6µV max. V IO =µv max. (Ta=-ºC to +8ºC) Low Offset Drift ΔV IO /ΔT=.9µV/ºC max. (Ta=- to +8ºC) Specified for ±V and ±V operation CMR db min.
More informationDesignated client product
Designated client product This product will be discontinued its production in the near term. And it is provided for customers currently in use only, with a time limit. It can not be available for your
More informationLow Noise, High-Speed Dual Operational Amplifier. Vni = 3nV/ Hz typ. (at f=10khz) ft = 90MHz typ. (at V + /V - = ±2.5V)
Low Noise, High-Speed Dual Operational Amplifier NJM2719 GENERAL DESCRIPTION The NJM2719 is a high speed voltage feedback dual operational amplifier specifically optimized for low voltage noise. Combining
More informationNJM12904L SINGLE SUPPLY DUAL AMPLIFIER
NJM9 SINGLE SUPPLY DUAL AMPLIFIER GENERAL DESCRIPTION The NJM9 is single-supply dual operational amplifier, which can operate from V supply. The features are low offset voltage, low bias current, and drive
More informationNJU7116 SUPER LOW OPERATING CURRENT AND LOW OFFSET VOLTAGE TINY SINGLE CMOS COMPARATOR
SUPER LOW OPERATING CURRENT AND LOW OFFSET VOLTAGE TINY SINGLE CMOS COMPARATOR GENERAL DESCRIPTION PACKAGE OUTLINE The NJU7 is a super low operating current and low offset voltage tiny single CMOS comparator
More informationNJM2794. Ground Noise Isolation Amplifier PACKAGE OUTLINE
Ground Noise Isolation Amplifier GENERAL DESCRIPTION The NJM79 is a ground noise isolation amplifier designed for car audio system. It contains dual channel differential amplifier. It is developed for
More informationSINGLE-SUPPLY DUAL COMPARATOR. * NJM2903CMD7 don t have a A version. (Top View)
NJM9C / NJM9CA SINGLE-SUPPLY DUAL COMPARATOR GENERAL DESCRIPTION The NJM9C / NJM9CA consist of two independent voltage comparators that are designed specifically to operate from a single power supply over
More informationUNISONIC TECHNOLOGIES CO., LTD LM833 Preliminary CMOS IC
UNISONIC TECHNOLOGIES CO., LTD LM833 Preliminary CMOS IC DUAL OPERATIONAL AND LOW VOLTAGE NOISE AMPLIFIER DESCRIPTION The UTC LM833 is integrated circuit amplifiers which combine dual operational and low
More informationRT2904WH. RobuST low-power dual operational amplifier. Applications. Features. Description
RobuST low-power dual operational amplifier Datasheet - production data Features D SO8 (plastic micropackage) Pin connections (top view) Frequency compensation implemented internally Large DC voltage gain:
More informationLM837 Low Noise Quad Operational Amplifier
LM837 Low Noise Quad Operational Amplifier General Description The LM837 is a quad operational amplifier designed for low noise, high speed and wide bandwidth performance. It has a new type of output stage
More information4in-1out Audio Selector with Isolation amplifier
in-out Audio Selector with Isolation amplifier! GENERAL DESCRIPTION! PACKAGE OUTLINE The NJM75 is In-out stereo audio Selector with ground noise isolation amplifiers. It contains dual channel differential
More informationULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER
NJM271 ULTRA HIGH SPEED SINGLE OPERATIONAL AMPLIFIER GENERAL DESCRIPTION The NJM271 is an ultra high speed hex operational amplifier. It can swings 26V/µs high slew rate and 1GHz gain band width product(1mhz
More informationLF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationLOW DROPOUT VOLTAGE REGULATOR
LOW DROPOUT VOLTAGE REGULATOR GENERAL DESCRIPTION The is a low dropout voltage regulator with ON/OFF control. Advanced Bipolar technology achieves low noise, high ripple rejection and low quiescent current.
More informationUNISONIC TECHNOLOGIES CO., LTD MC4556
UNISONIC TECHNOLOGIES CO., LTD MC4556 DUAL OPERATIONAL AMPLIFIER DESCRIPTION The UTC MC4556 integrated circuit is a high-gain, high output current dual operational amplifier capable of driving 70mA into
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD LOW POWER DUAL J-FET OPERATIONAL AMPLIFIER DESCRIPTION The UTC TL062 is a high speed J-FET input dual operational amplifier. It incorporates well matched, high voltage J-FET
More informationNJM78M00S 3-TERMINAL POSITIVE VOLTAGE REGULATOR
-TERMINAL POSITIVE VOLTAGE REGULATOR NJM78MS GENERAL DESCRIPTION The NJM78MS is a.5a output -Terminal Positive Voltage Regulator. It has improvements in contrast with a conventional NJM78M: An output voltage
More informationRail-to-Rail, 200kHz Op Amp with Shutdown in a Tiny, 6-Bump WLP
19-579; Rev ; 12/1 EVALUATION KIT AVAILABLE Rail-to-Rail, 2kHz Op Amp General Description The op amp features a maximized ratio of gain bandwidth (GBW) to supply current and is ideal for battery-powered
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD GENERAL PURPOSE, LOW VOLTAGE, RAIL-TO-RAIL OUTPUT OPERATIONAL AMPLIFIERS DESCRIPTION The UTC LV358 is a dual op amp with low supply current and low voltage (2.7-5.5V). It
More informationNJM2355 TWO OUTPUT HIGH VOLTAGE SWITCHING REGULATOR
TWO OUTPUT HIGH VOLTAGE SWITCHING REGULATOR NJM2355 GENERAL DESCRIPTION New JRC's high voltage switching regulator, NJM2355, is a monolithic high voltage (50V max) operation integrated circuit consisting
More informationLF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS
LF153 LF253 - LF353 WIDE BANDWIDTH DUAL J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationNJM2783. Preliminary. Monaural Microphone Amplifier with ALC
Preliminary NJM2783 Monaural Microphone Amplifier with ALC GENERAL DESCRIPTION The NJM2783 is a monaural microphone amplifier with auto level control function to avoid distortion due to clipping. The voltage
More informationTL 072 S G Green G : Green. TL072SG-13 S SOP-8L 2500/Tape & Reel -13
Features General Description Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion 0.003%
More informationDUAL BIPOLAR OPERATIONAL AMPLIFIERS General Description. Features. Applications
General Description The consists of two high performance operational amplifiers. The IC features high gain, low equivalent input noise voltage, high input resistance, excellent channel separation, wide
More informationLM4808 Dual 105 mw Headphone Amplifier
Dual 105 mw Headphone Amplifier General Description The is a dual audio power amplifier capable of delivering 105 mw per channel of continuous average power into a16ωload with 0.1% (THD+N) from a 5V power
More informationUNISONIC TECHNOLOGIES CO., LTD LM321
UNISONIC TECHNOLOGIES CO., LTD LM321 LOW POWER SINGLE OP AMP DESCRIPTION The UTC LM321 s quiescent current is only 430µA (5V). The UTC LM321 brings performance and economy to low power systems, With a
More informationTL072 TL072A - TL072B
A - B LOW NOISE J-FET DUAL OPERATIONAL AMPLIFIERS WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT LOW NOISE e n = 15nV/ Hz (typ) OUTPUT SHORT-CIRCUIT PROTECTION
More informationBand Pass Filter for Spectrum Analyzer Display
NJM Band Pass Filter for Spectrum Analyzer Display GENERAL DESCRIPTION The NJM is a band pass filter for spectrum analyzer display. It includes -band BPF amplifier, -band detector and recording level indicator
More informationAZV831/2. Description. Pin Assignments NEW PRODUCT. Features. Applications
SINGLE/DUAL LOW BIAS CURRENT, LOW VOLTAGE, RAIL-TO-RAIL INPUT/OUTPUT CMOS OPERATIONAL AMPLIFIERS Description Pin Assignments The AZV83/AZV832 is single/dual channels rail-to-rail input and output amplifier,
More informationTS mW Stereo Headphone Amplifier. Description. Applications. Order Codes
mw Stereo Headphone Amplifier Operating from to 5.5V mw into 6Ω at 5V 3mW into 6Ω at 3.3V.5mW into 6Ω at 2V Switch ON/OFF click reduction circuitry High power supply rejection ratio: 5dB at 5V High signal-to-noise
More informationPrecision, High-Bandwidth Op Amp
EVALUATION KIT AVAILABLE MAX9622 General Description The MAX9622 op amp features rail-to-rail output and MHz GBW at just 1mA supply current. At power-up, this device autocalibrates its input offset voltage
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD DUAL OPERATIONAL AMPLIFIER DESCRIPTION The UTC MC1458 is a high performance dual operational amplifier. It is designed for a wide range of analog applications. The high gain
More informationV CC OUT MAX9945 IN+ V EE
19-4398; Rev ; 2/9 38V, Low-Noise, MOS-Input, General Description The operational amplifier features an excellent combination of low operating power and low input voltage noise. In addition, MOS inputs
More informationLMC7101 A12A. Features. General Description. Applications. Ordering Information. Pin Configuration. Functional Configuration.
LMC7 LMC7 Low-Power Operational Amplifier Final Information General Description The LMC7 is a high-performance, low-power, operational amplifier which is pin-for-pin compatible with the National Semiconductor
More informationLF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS
LF147 - LF247 LF347 WIDE BANDWIDTH QUAD J-FET OPERATIONAL AMPLIFIERS LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW INPUT BIAS AND OFFSET CURRENT OUTPUT SHORT-CIRCUIT
More informationUNISONIC TECHNOLOGIES CO., LTD
UNISONIC TECHNOLOGIES CO., LTD CLASS AB STEREO HEADPHONE DRIVER DESCRIPTION As operating on a single 5V supply, the UTC PA2308 is capable of delivering 280mW of max. Output power to an 8Ωload or 110mW
More informationLOW VOLTAGE VIDEO AMPLIFIER WITH LPF
LOW VOLTAGE VIDEO AMPLIFIER WITH LPF GENERAL DESCRIPTION The NJM2561A is a low voltage single video amplifier with low pass filter. The NJM2561A features low power and small package. It is suitable for
More informationV CC OUT MAX9945 IN+ V EE
19-4398; Rev 1; 12/ 38V, Low-Noise, MOS-Input, General Description The operational amplifier features an excellent combination of low operating power and low input voltage noise. In addition, MOS inputs
More informationLM2904AH. Low-power, dual operational amplifier. Related products. Description. Features. See LM2904WH for enhanced ESD performances
LM2904AH Low-power, dual operational amplifier Datasheet - production data Related products See LM2904WH for enhanced ESD performances Features Frequency compensation implemented internally Large DC voltage
More informationHigh frequency operational amplifier
DESCRIPTION The is a very wide bandwidth, high slew rate, monolithic operational amplifier for use in video amplifiers, RF amplifiers, and extremely high slew rate amplifiers. PIN CONFIGURATION D, F, N
More informationNJM Input / 1-Output Stereo Audio Selector
-Input / -Output Stereo Audio Selector GENERAL DESCRIPTION The NJM is Input / Output Stereo Audio Selector. The NJM consists of switches and buffer operational amplifiers. Based on the internal switch
More informationADJUSTABLE PRECISION SHUNT REGULATOR NJM431SU NJM431SF NJM432SU NJM432SF 1.CATHODE 1.N.C. 2.ANODE 2.ANODE 3.CATHODE 2.ANODE 3.
ADJUSTABLE PRECISION SHUNT REGULATOR GENERAL DESCRIPTION The NJM431S/NJM432S are adjustable precision shunt regulators. The output voltage may be set to any value between VREF (about 2.5V) and 36V by two
More informationLF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER
LF151 LF251 - LF351 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER INTERNALLY ADJUSTABLE INPUT OFFSET VOLTAGE LOW POWER CONSUMPTION WIDE COMMON-MODE (UP TO V + CC ) AND DIFFERENTIAL VOLTAGE RANGE LOW
More informationDual, Ultralow Distortion, Ultralow Noise Op Amp AD8599
Dual, Ultralow Distortion, Ultralow Noise Op Amp FEATURES Low noise: 1 nv/ Hz at 1 khz Low distortion: 5 db THD @ khz
More informationMARKING DIAGRAMS ORDERING INFORMATION Figure 1. Representative Schematic Diagram (Each Amplifier) DUAL MC33078P
The MC33078/9 series is a family of high quality monolithic amplifiers employing Bipolar technology with innovative high performance concepts for quality audio and data signal processing applications.
More informationVery Low Distortion, Precision Difference Amplifier AD8274
Very Low Distortion, Precision Difference Amplifier AD8274 FEATURES Very low distortion.2% THD + N (2 khz).% THD + N ( khz) Drives Ω loads Excellent gain accuracy.3% maximum gain error 2 ppm/ C maximum
More informationNJM Input / 1-Output Stereo Audio Selector
NJM -Input / -Output Stereo Audio Selector GENERAL DESCRIPTION The NJM is -Input / -Output Stereo Audio Selector. The NJM consists of switches and buffer operational amplifiers. Based on the internal switch
More informationNJM2267M. DUAL VIDEO 6dB AMPLIFIER WITH 75Ω DRIVER PACKAGE OUTLINE
DUAL VIDEO 6dB AMPLIFIER WITH 75Ω DRIVER NJM2267 GENERAL DESCRIPTION NJM2267 is a dual video 6dB amplifier with 75Ω drivers for S-VHS VCRs, HI-BAND VCRs, etc..each channel has clamp function that fixes
More informationDual Precision, Low Cost, High Speed BiFET Op Amp AD712-EP
Dual Precision, Low Cost, High Speed BiFET Op Amp FEATURES Supports defense and aerospace applications (AQEC standard) Military temperature range ( 55 C to +125 C) Controlled manufacturing baseline One
More informationMaintenance/ Discontinued
ICs for TV AN22 Dual -W BTL audio power amplifier Overview AN22 is an audio power amplifier IC for the stereo system. In the BTL (balanced transformerless) method, fewer external parts and easier design
More informationNJM TERMINAL POSITIVE VOLTAGE REGULATOR
3-TERMINAL POSITIVE VOLTAGE REGULATOR NJM7800 GENERAL DESCRIPTION The NJM7800 series of monolithic 3-Terminal Positive Voltage Regulators is constructed using the New JRC Planar epitaxial process. These
More informationMaintenance/ Discontinued
ICs for Audio Common Use AN752 Dual -W BTL audio power amplifier Overview The AN752 is an audio power amplifier IC for stereo system. The BTL (Balanced Transformer-Less) method can provide fewer external
More informationOPERATIONAL AMPLIFIER & VOLTAGE REFERENCE KL103/A TECHNICAL DATA DESCRIPTION. PIN CONNECTIONS (top view) OPERATIONAL AMPLIFIER
TECHNICAL DATA OPERATIONAL AMPLIFIER & OLTAGE REFERENCE KL13/A OPERATIONAL AMPLIFIER LOW INPUT OFFSET OLTAGE :. typ. LOW SUPPLY CURRENT : 3 A/op. (@ cc = ) MEDIUM BANDWIDTH (unity gain) :.9MHz LARGE OUTPUT
More informationLM101A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS
LM1A-LM201A LM301A SINGLE OPERATIONAL AMPLIFIERS LM1A LM201A LM301A INPUT OFFSET VOLTAGE 0.7mV 2mV INPUT BIAS CURRENT 25nA 70nA INPUT OFFSET CURRENT 1.5nA 2nA SLEW RATE AS INVERSINGV/µs V/µs AMPLIFIER
More information