Radiating Cables RCL/RCH INSTALLATION GUIDE
|
|
|
- Domenic Green
- 5 years ago
- Views:
Transcription
1 Radiating Cables RCL/RCH INSTALLATION GUIDE
2
3 Your Feedback Please We always want you to feel that you made the right decision to use our products. If you have suggestions, comments, compliments or complaints about our products, documentation, or support, please write or call us. How to Contact Us ProSoft Technology, Inc. +1 (661) (661) (Fax) Copyright 2018 ProSoft Technology, Inc. All rights reserved. Radiating Cables Installation Guide ProSoft Technology, ProLinx, inrax, ProTalk, and RadioLinx are Registered Trademarks of ProSoft Technology, Inc. All other brand or product names are or may be trademarks of, and are used to identify products and services of, their respective owners. ProSoft Technology Product Documentation In an effort to conserve paper, ProSoft Technology no longer includes printed manuals with our product shipments. User Manuals, Datasheets, Sample Ladder Files, and Configuration Files are provided at: iii
4 This Page intentionally left blank. iv
5 Radiating Cable Guide Contents Contents Contents Your Feedback Please... iii How to Contact Us... iii ProSoft Technology Product Documentation... iii Disclaimer... 1 Safety Onsite... 1 Cordoning-off the Working Area... 1 Keeping Emergency Access and Emergency Routes Clear... 1 Fire Precautions... 1 Hook Hanger for Radiating Cable Installation... 9 Installing the Hook Hanger... 9 Installing the Hook Hanger with Metal Anchor and Fire Resistant Belt Installation Instructions for Clic Clamp with Nylon Plug and Round Base Spacer Installation Instructions for Clip Hangers Installing Clip Clamp with Steel Plug and Steel Spacer Installing a Clic Clamp with a Hammer Set Plug Bending RF Cables Connector Installation for Radiating Cables ½-inch Typical Installation Contacting Technical Support Warranty Information v
6 Contents Radiating Cable Guide This page intentionally left blank. vi
7 Radiating Cable Guide Start Here Start Here Disclaimer This installation manual is provided to help assist in part selection and Radiating Cable installation. Please contact ProSoft Technology Technical Support to review and assist with your application. Safety Onsite Cordoning-off the Working Area Warning Signs Warning Cones Warning Lights Warning Tape Keeping Emergency Access and Emergency Routes Clear Materials Tolls Vehicles Fire Precautions Easily inflammable materials should be kept to a minimum disposed of immediately if not necessary brought into the tunnel only in the amount required ProSoft Technology, Inc. 1
8 Slot Orientation for RC Cables Radiating Cable Guide Caution: You must be able to complete the application without exposing personnel or equipment to unsafe or inappropriate working conditions. 2 ProSoft Technology, Inc.
9 Radiating Cable Guide Radiating Cable Positioning in Tunnels Radiating Cable Positioning in Tunnels ProSoft Technology, Inc. 3
10 Radiating Cable Positioning in Tunnels Radiating Cable Guide This page intentionally left blank. 4 ProSoft Technology, Inc.
11 Radiating Cable Guide Slot Orientation for RC Cables Slot Orientation for RC Cables The slots are location 180 opposite to an embossed line on the jacket. ProSoft Technology, Inc. 5
12 Slot Orientation for RC Cables Radiating Cable Guide 6 ProSoft Technology, Inc.
13 Radiating Cable Guide Drilling and Clamping Drilling and Clamping The recommended hangers may be clip clamps or hook hangers without fire resistant belt. Clamps should be hung every 3 feet (1 meter). Hangers should be placed approximately 33 feet (10 meters) apart. The recommended hangers should be of a fire-resistant type. The hangers may be hook hangers with a metal anchor and a fire-resistant belt, clip hangers, or steel clamps. ProSoft Technology, Inc. 7
14 Drilling and Clamping Radiating Cable Guide This page intentionally left blank. 8 ProSoft Technology, Inc.
15 Radiating Cable Guide Installation Material Installation Material Hook Hanger for Radiating Cable Installation Installing the Hook Hanger ProSoft Technology, Inc. 9
16 Installation Material Radiating Cable Guide Hangers consist of glass fiber-strengthened Durethan : Halogen free according to DIN VDE 0472, Part 185 Fire-retardant according to UL94, Class V-O UV-resistant 1. Drill a 6 mm diameter hole at least 2.30 inches (60 mm) deep. 2. Using an adapted tool, strike the hammer screw through the washer and the hanger to secure. 3. Hook the cable and fix it with the cable fastener band. 10 ProSoft Technology, Inc.
17 Radiating Cable Guide Installation Material Installing the Hook Hanger with Metal Anchor and Fire Resistant Belt 1. Drill a 6 mm hole a minimum of 60mm deep. 2. Insert the fire resistant band through the bottom of the hanger as shown. 3. Drive a full metal anchor through the large washer, belt, and hanger using the adapted tool as shown. ProSoft Technology, Inc. 11
18 Installation Material Radiating Cable Guide 4. Tighten the fixing nut with the appropriate tool. 5. Hook the cable and fix it with the cable fastener band as shown. 12 ProSoft Technology, Inc.
19 Radiating Cable Guide Installation Material 6. Close the fire resistant band around the cable by tightening the nut and bolt. ProSoft Technology, Inc. 13
20 Installation Material Radiating Cable Guide Installation Instructions for Clic Clamp with Nylon Plug and Round Base Spacer 1. Drill a 6mm hole in insert the nylon plug into the wall. 2. Connect the Clic Clamp to the Spacer as shown. 14 ProSoft Technology, Inc.
21 Radiating Cable Guide Installation Material Installation Instructions for Clip Hangers 1. Drill an 8mm diameter hole a minimum of 27 mm depth. 2. Insert the M6 steel plug into the wall and strike it with the hammer using the appropriate setting tool. 3. Tighten the bolt through the spacer and hanger (washer inside). ProSoft Technology, Inc. 15
22 Installation Material Radiating Cable Guide 16 ProSoft Technology, Inc.
23 Radiating Cable Guide Installation Material Installing Clip Clamp with Steel Plug and Steel Spacer 1. Drill a 10 mm diameter hole that is 33 mm deep. 2. Insert the M8 steel plug in to wall and strike it with the hammer using the appropriate setting tool. 3. Tighten the spacer into the plug. ProSoft Technology, Inc. 17
24 Installation Material Radiating Cable Guide 4. Insert the flat nut into the click clamp and tighten the assembly by screwing on the steel spacer. 18 ProSoft Technology, Inc.
25 Radiating Cable Guide Installation Material Installing a Clic Clamp with a Hammer Set Plug 1. Drill a 6mm diameter hole using the drill tool and insert the steel plug by striking it with the hammer and setting tool. 2. Inset the flat nut into the click clamp and tighten the assembly by screwing it to the plug. ProSoft Technology, Inc. 19
26 Installation Material Radiating Cable Guide 20 ProSoft Technology, Inc.
27 Radiating Cable Guide Cable Hanging and Fixing Cable Hanging and Fixing Bending RF Cables Care should always be taken when bending RF cables. The following diagram show the right and wrong way to bend cable. Bending the wrong way may cause damage to the cable. ProSoft Technology, Inc. 21
28 Cable Hanging and Fixing Radiating Cable Guide Connector Installation for Radiating Cables ½-inch Typical Installation 22 ProSoft Technology, Inc.
29 Radiating Cable Guide Support, Service & Warranty Support, Service & Warranty Contacting Technical Support ProSoft Technology, Inc. (ProSoft) is committed to providing the most efficient and effective support possible. Before calling, please gather the following information to assist in expediting this process: 1. Product Version Number 2. System architecture 3. Network details If the issue is hardware related, we will also need information regarding: 4. Module configuration and associated ladder files, if any 5. Module operation and any unusual behavior 6. Configuration/Debug status information 7. LED patterns 8. Details about the serial, Ethernet or fieldbus devices interfaced to the module, if any. Note: For technical support calls within the United States, an after-hours answering system allows 24-hour/7-days-aweek pager access to one of our qualified Technical and/or Application Support Engineers. Detailed contact information for all our worldwide locations is available on the following page. ProSoft Technology, Inc. 23
30 Support, Service and Warranty Radiating Cable Guide Asia Pacific Regional Office Phone: Languages spoken: Bahasa, Chinese, English, Japanese, Korean REGIONAL TECH SUPPORT North Asia (China, Hong Kong) Phone: Languages spoken: Chinese, English REGIONAL TECH SUPPORT Southwest Asia (India, Pakistan) Phone: Languages spoken: English, Hindi, Urdu Australasia (Australia, New Zealand) Phone: Language spoken: English Southeast Asia (Singapore, Indonesia, Philippines) Phone: Languages spoken: English, Bahasa, Tamil Northeast & Southeast Asia (Japan, Taiwan, Thailand, Vietnam, Malaysia) Phone: Languages spoken: English, Chinese, Japanese Korea Phone: Languages spoken: English, Korean Europe / Middle East / Africa Regional Office Phone: +33.(0) europe@prosoft-technology.com Languages spoken: French, English REGIONAL TECH SUPPORT support.emea@prosoft-technology.com Middle East & Africa Phone: mea@prosoft-technology.com Languages spoken: Hindi, English REGIONAL TECH SUPPORT support.emea@prosoft-technology.com North Western Europe (UK, IE, IS, DK, NO, SE) Phone: +44.(0) nweurope@prosoft-technology.com Language spoken: English Central & Eastern Europe, Finland Phone: centraleurope@prosoft-technology.com Languages spoken: Polish, English, Russia & CIS Phone: russia@prosoft-technology.com Languages spoken: Russian, English Austria, Germany, Switzerland Phone: +33.(0) germany@prosoft-technology.com Language spoken: English, German BeNeLux, France, North Africa Phone: +33(0) france@prosoft-technology.com Languages spoken: French, English Mediterranean Countries Phone: italy@prosoft-technology.com Languages spoken: Italian, English, Spanish 24 ProSoft Technology, Inc.
31 Radiating Cable Guide Support, Service & Warranty Latin America Regional Office Phone: Languages spoken: Spanish, English REGIONAL TECH SUPPORT North America Regional Office Phone: Languages spoken: English, Spanish REGIONAL TECH SUPPORT Brazil Phone: Languages spoken: Portuguese, English REGIONAL TECH SUPPORT Mexico Phone: Languages spoken: Spanish, English REGIONAL TECH SUPPORT Andean Countries, Central America & Caribbean Phone: Languages spoken: Spanish, English Southern Cone (Argentina, Bolivia, Chile, Paraguay & Uruguay) Phone: Languages spoken: Spanish, English Warranty Information For complete details regarding ProSoft Technology s TERMS & CONDITIONS OF SALE, WARRANTY, SUPPORT, SERVICE AND RETURN MATERIAL AUTHORIZATION INSTRUCTIONS please see the documents at: Documentation is subject to change without notice. ProSoft Technology, Inc. 25
Radio Kit with Onboard I/O
Radio Kit with Onboard I/O BR-0900-RM4 BR-2400-RM4 USER GUIDE User Guide Your Feedback Please We always want you to feel that you made the right decision to use our products. If you have suggestions,
Frame through-beam sensors
Frame through-beam sensors Features Wide range of sizes: passage sizes from 25 x 23 mm to 300 x 397.5 mm Metal housings Integrated evaluation unit Connection by means of connector Degree of protection
Automated Frequency Response Measurement with AFG31000, MDO3000 and TekBench Instrument Control Software APPLICATION NOTE
Automated Frequency Response Measurement with AFG31000, MDO3000 and TekBench Instrument Control Software Introduction For undergraduate students in colleges and universities, frequency response testing
Through-beam ring sensors
Throughbeam ring sensors Features Wide range of sizes: ring diameters of 10, 15 and 20 mm Metal housings Separate evaluation unit Connection by means of S8 connector Degree of protection IP 63 Adjustable
OB1U INSTALLATION INSTRUCTIONS. Interactive Flat Panel Over White Board Mount
INSTALLATION INSTRUCTIONS Interactive Flat Panel Over White Board Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description
Power Measurement and Analysis Software
Power Measurement and Analysis Software TPS2PWR1 Data Sheet Features & Benefits Improve Efficiency of Power Designs with Switching-loss Measurements including Turn-on, Turn-off, and Conduction Losses Reduce
Using the Model 4225-RPM Remote Amplifier/ Switch to Automate Switching Between DC I-V, C-V, and Pulsed I-V Measurements APPLICATION NOTE
Using the Model 4225-RPM Remote Amplifier/ Switch to Automate Switching Between DC I-V, C-V, and Pulsed I-V Measurements Characterizing a device, material, or process electrically often requires performing
AC/DC Current Probe TCP0150 Datasheet
AC/DC Current Probe TCP0150 Datasheet Low noise and DC drift Provides automatic units scaling and readout on the oscilloscope's display Remote GPIB/USB probe control through the oscilloscope Split-core
Verifying Power Supply Sequencing with an 8-Channel Oscilloscope APPLICATION NOTE
Verifying Power Supply Sequencing with an 8-Channel Oscilloscope Introduction In systems that rely on multiple power rails, power-on sequencing and power-off sequencing can be critical. If the power supplies
Keysight Technologies N6850A Broadband Omnidirectional Antenna. Data Sheet
Keysight Technologies N6850A Broadband Omnidirectional Antenna Data Sheet 02 Keysight N6850A Broadband Omnidirectional Antenna - Data Sheet Industries and Applications Spectrum monitoring and signal location,
12.5 Gb/s Driver Amplifier LABware Module PSPL8001 Datasheet
12.5 Gb/s Driver Amplifier LABware Module PSPL8001 Datasheet The PSPL8001 12.5 Gb/s Driver Amplifier LABware Module is designed for bench-top lab use. This LABware module can simply be plugged in with
SERVICE MANUAL. SL236 Lift Weld Replacement. Lift Weldment Replacement
SERVICE MANUAL Lift Weldment Replacement Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description
Keysight Technologies NFA Noise Figure Analyzer. Configuration Guide
Keysight Technologies NFA Noise Figure Analyzer Configuration Guide Noise Figure Analyzer Overview Over 50 years of noise figure leadership Dedicated Noise Figure Analyzer Hard specifications to 26.5 GHz
Agilent 4294A Precision Impedance Analyzer, 40 Hz to 110 MHz. Configuration Guide
Agilent 4294A Precision Impedance Analyzer, 40 Hz to 110 MHz Configuration Guide Ordering Guide The following steps will guide you through configuring your 4294A. Standard Furnished Item CD-ROM Manual
Simplifying FET Testing with 2600B System SourceMeter SMU Instruments APPLICATION NOTE
Simplifying FET Testing with 2600B System SourceMeter SMU Instruments Introduction Field effect transistors (FETs) are important semiconductor devices with many applications because they are fundamental
Keysight 86205B RF Bridge
Keysight 86205B RF Bridge Operating and Service Manual Notices Keysight Technologies 2011, 2014 No part of this manual may be reproduced in any form or by any means (including electronic storage and
KickStart Instrument Control Software Datasheet
KickStart Instrument Control Software Datasheet Key Features Built-in I-V characterizer, datalogger, and precision DC power applications Optional high resistivity measurement application that complies
io n Data Sheet or The P5205 is a 100 MHz Active Differential Probe capable of measuring fast rise times of signals in floating circuits. This 1,300 V
High-voltage Differential Probes P5200 P5205 P5210 Data Sheet P5205 Features & Benefits Bandwidths up to 100 MHz Up to 5,600 V Differential (DC + pk AC) Up to 2,200 V Common (RMS) Overrange Indicator Safety
SOURCE MEASURE UNITS. Make Multiple Measurements Accurately Using a Single Instrument All While Saving Space, Time and Money
SOURCE MEASURE UNITS Make Multiple Measurements Accurately Using a Single Instrument All While Saving Space, Time and Money Do you use a power supply or digital multimeter? How about an electronic load,
Passive High Voltage Probes P5100A-TPP0850-P5122-P5150-P6015A Datasheet
Passive High Voltage Probes P5100A-TPP0850-P5122-P5150-P6015A Datasheet P5150 DC to 500 MHz 2500 V Peak, 1000 V RMS CAT II 50 X Floatable up to 600 V RMS CAT II or 300 V RMS CAT III For TPS2000 and THS3000
High-voltage Differential Probes
High-voltage Differential Probes P5200 P5205 P5210 Data Sheet Features & Benefits Bandwidths up to 100 MHz Up to 5,600 V Differential (DC + pk AC) Up to 2,200 V Common (RMS) Overrange Indicator Safety
Isolation Addresses Common Sources of Differential Measurement Error
By Tom Neville A typical measurement system includes an oscilloscope and an oscilloscope probe that provides the connection between the device under test (DUT) and the oscilloscope. Probe selection is
Table of Contents Executive Summary 29
Contents Table of Contents Executive Summary 29 Section 1: Introduction 33 Section 2: World 37 2.1.1. Main consumers 37 2.1.2. Main producers 2015 and 2016 39 2.1.3. Main importers 2015 and 2016 40 2.1.4.
Cisco ONS Metropolitan Dense Wavelength Division Multiplexing 100-GHz FlexLayer Filter Solution
Data Sheet Cisco ONS 15216 Metropolitan Dense Wavelength Division Multiplexing 100-GHz FlexLayer Filter Solution The Cisco ONS 15216 Metropolitan Dense Wavelength-Division Multiplexing (DWDM) FlexLayer
Radiofrequency Ablation Needle Electrodes. Procedural Algorithms and Lesion Geometry
Radiofrequency Ablation Needle Electrodes Procedural Algorithms and Lesion Geometry Radiofrequency Ablation Needle Electrodes O R D E R I N G I N F O R M A T I O N Array Cannula UPN Order Number Diameter
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens
Installation and Assembly - Universal Articulating Swivel Double-Arm for 42" - 60" Plasma Screens Models: PLAV 70-UNL, PLAV 70-UNL-S PLAV 70-UNLP, PLAV 70-UNLP-S R This product is UL Listed. It must be
Passive High Voltage Probes P5100 P5102 P5120 P6015A
P5120. P5100 High Voltage Probe The P5100 is a low-input capacitance High Voltage Probe (2.5 kv) designed for higher frequency applications. The probe can be compensated to match plug-ins and oscilloscopes
High-voltage Differential Probes TMDP THDP THDP P5200A - P5202A - P5205A - P5210A
High-voltage Differential Probes TMDP0200 - THDP0200 - THDP0100 - P5200A - P5202A - P5205A - P5210A BNC interface (P5200A probes) TekVPI interface (TMDP and THDP Series probes) TekProbe interface (P5202A,
Simplifying DC-DC Converter Characterization using a 2600B System SourceMeter SMU Instrument and MSO/DPO5000 or DPO7000 Series Scope APPLICATION NOTE
Simplifying DC-DC Characterization using a 2600B System SourceMeter SMU Instrument and MSO/DPO5000 or DPO7000 Series Scope Introduction DC-DC converters are widely used electronic components that convert
SCXI High-Voltage Terminal Block
INSTALLATION GUIDE SCXI -326 High-Voltage Terminal Block Introduction This guide describes how to use and install the SCXI-326 high-voltage terminal block with the SCXI-62, the SCXI-63, the SCXI-62HV,
1.5 GHz Active Probe TAP1500 Datasheet
1.5 GHz Active Probe TAP1500 Datasheet Easy to use Connects directly to oscilloscopes with the TekVPI probe interface Provides automatic units scaling and readout on the oscilloscope display Easy access
Advanced Test Equipment Rentals ATEC (2832)
Established 1981 Advanced Test Equipment Rentals www.atecorp.com 800-404-ATEC (2832) Z-Active Differential Probe Family P7313 P7380A P7360A P7340A Data Sheet Features & Benefits Signal Fidelity >12.5 GHz
CISCO ONS /100-GHZ INTERLEAVER/DE-INTERLEAVER FOR THE CISCO ONS MULTISERVICE TRANSPORT PLATFORM
DATA SHEET CISCO ONS 15216 50/100-GHZ INTERLEAVER/DE-INTERLEAVER FOR THE CISCO ONS 15454 MULTISERVICE TRANSPORT PLATFORM The Cisco ONS 15216 50/100-GHz Interleaver/De-interleaver is an advanced 50/100-GHz
Ceiling Mount - 32" to 60" - Single Installation Instructions
Ceiling Mount - 32" to 60" - Single Installation Instructions Important Safety Information Use proper safety equipment during installation If you don't understand the installation instructions, have any
Z-Active Differential Probe Family P7313 P7380A P7360A P7340A Datasheet
Z-Active Differential Probe Family P7313 P7380A P7360A P7340A Datasheet Versatility Make differential or single-ended (ground-referenced) measurements 1 Solder-down capability Handheld probing with variable
Using the Ramp Rate Method for Making Quasistatic C-V Measurements with the 4200A-SCS Parameter Analyzer APPLICATION NOTE
Using the Ramp Rate Method for Making Quasistatic C-V Measurements with the 4200A-SCS Parameter Analyzer Introduction Capacitance-voltage (C-V) measurements are generally made using an AC measurement technique.
2018/2019 HCT Transition Period OFFICIAL COMPETITION RULES
2018/2019 HCT Transition Period OFFICIAL COMPETITION RULES 1. INTRODUCTION These HCT Transition Period Official Competition Rules ( Official Rules ) govern how players earn Hearthstone Competitive Points
Cisco Aironet 14-dBi Patch Antenna (AIR-ANT5114P-N)
Cisco Aironet 14-dBi Patch Antenna (AIR-ANT5114P-N) This document outlines the specifications for the Cisco Aironet 14-dBi Patch Antenna (AIR-ANT5114P-N) and provides instructions for mounting it. The
STAINLESS STEEL STAINLESS STEEL MANUFACTURING STAINLESS STEEL TRADING BRIGHT BARS WIRES PRECISION COMPONENTS
STAINLESS STEEL BRIGHT BARS WIRES PRECISION COMPONENTS BHANSALI is diversified business group with interests in Stainless Steel, Textiles and ABS Plastics. Under the dynamic leadership of Mr. Pukhraj Bhansali
SAN25BB Instruction Manual
SAN25BB Instruction Manual Scan here to view product demo and install videos or visit san.us/109 Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520
SAN12 ( <00>)
SAN12 (6904-002020 ) Wood 13mm (1/2 in.) 3mm (1/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe, Middle East,
SCXI High-Voltage Terminal Block
INSTALLATION GUIDE SCXI -1324 High-Voltage Terminal Block This guide describes how to install and use the SCXI-1324 high-voltage terminal block with the SCXI-1160 module. The SCXI-1324 high-voltage terminal
20X Low Capacitance Probe P6158 Datasheet
20X Low Capacitance Probe P6158 Datasheet Circuit board impedance testing (TDR) High-speed sampling systems P6158 DC to 3 GHz The P6158 is a 3 GHz, 20X, low-capacitance probe. The P6158 is ideal for high-speed
Mexico s Fastener Imports
198 INDUSTRY Mexico s Fastener Imports Will the Industry Continue to Grow? *Note: all values in the data presented in the article are FOB value in USD and the 2016 period only represents data through the
Don t Let EMI/EMC Compliance Certification Slow You Down TUTORIAL
Don t Let EMI/EMC Compliance Certification Slow You Down TUTORIAL TUTORIAL Uncover Problems Early with Pre-compliance Testing EMI regulations are in place throughout the world to provide improved reliability
Differential Probes P6248 P6247 P6246 Datasheet
Differential Probes P6248 P6247 P6246 Datasheet P6247 key performance specifications 1.0 GHz bandwidth (guaranteed) P6246 key performance specifications 400 MHz bandwidth (guaranteed) Key features Low
USG BORAL HIGHLANDS CEILING SYSTEM Technical Manual (Installation Guide)
USG BORAL HIGHLANS CEILING SYSTEM Technical Manual (Installation Guide) The USG Boral Highlands Ceiling System provides customised ceiling visual effects with multiple perforation patterns and panel height
Tire Pressure Monitoring Systems and Remote/Passive Keyless Entry
Tire Pressure Monitoring Systems and Remote/Passive Keyless Entry Introduction Today, more sophisticated and sensitive RF electronic components and devices are being included in automobiles. These advances
Media Storage Systems Fixed Media Cabinets
Owner s Manual Media Storage Systems Fixed Media Cabinets Contents 1-Column Fixed Media Storage Cabinet Important User Information...........................2 Safety Precautions.................................3
Telescopic Screw Gun Bracket & Accessories
Telescopic Screw Gun Bracket & Accessories TSGB Features and Benefits: Fast and easy installation Allows attachment from the front or inside of the stud in any depth Improved design with stamped inch markings
Mounting Kit for HP N-class Servers AR8014A
Mounting Kit for HP N-class Servers AR8014A This kit is used to mount an HP N-class or rp7400 server in a NetShelter SX or VX enclosure. HP compatibility bracket (2) SX extender brackets (4) M6 12 Torx
PLA50B Instruction Manual
PLA50B Instruction Manual We are here to help! Please contact Customer Service with any questions. Customer Service Americas: 800-359-5520 651-484-7988 info@sanus.com Europe, Middle East, and Africa: +
Measuring Vgs on Wide Bandgap Semiconductors APPLICATION NOTE
Measuring Vgs on Wide Bandgap Semiconductors This application note focuses on accurate high-side V GS measurements using the IsoVu measurement system. The measurements described in this application note
Passive Voltage Probes
Passive Voltage Probes TPP1000 TPP0500 TPP0502 Datasheet Connectivity Integrated Oscilloscope and Probe Measurement System provides Intelligent Communication that Automatically Scales and Adjusts Units
WORLD LEADERS IN LINEAR MOTION
HepcoMotion Lower Moor Business Park Tiverton Way Tiverton Devon England EX16 6TG Tel: +44 (0)1884 257000 Fax: +44 (0)1884 243500 E-mail: sales@hepcomotion.com Corp Broch UK 01 2015 Hepco Slide Systems
Keysight Technologies E1834E/G/J/M/Z Mounted Beam Delivery Optics. Preliminary Data Sheet
Keysight Technologies E1834E/G/J/M/Z Mounted Beam Delivery Optics Preliminary Data Sheet The Keysight Technologies, Inc. E1834 family of beam delivery optics uses high performance mounts to meet the pointing
Mounting Accessories. Installation Guide. VIVOTEK SD83XXE Speed Dome
VIVOTEK SD83XXE Speed Dome Mounting Accessories AM-116/117 Pendant Pipe AM-118 Pendant Head AM-221 Gooseneck AM-231 Parapet Mount AM-519 Pendant Adaptor Installation Guide Corresponding part numbers: AM-116:
Japan s Leading Exhibition for Robotics Technologies Jan. 17[Wed]-19[Fri], 2018 Tokyo Big Sight, Japan
![Japan s Leading Exhibition for Robotics Technologies Jan. 17[Wed]-19[Fri], 2018 Tokyo Big Sight, Japan](/thumbs/78/76786007.jpg "Japan s Leading Exhibition for Robotics Technologies Jan. 17[Wed]-19[Fri], 2018 Tokyo Big Sight, Japan")
Japan s Leading Exhibition for Robotics Technologies Jan. 17[Wed]-19[Fri], 2018 Tokyo Big Sight, Japan Web: http://www.robodex.jp/en/ POST SHOW REPORT 2018 FACTS & FIGURES 17,186 Visitors 200 Exhibitors
A401 Instruction Manual
A401 Instruction Manual Milestone AV Technologies 6436 City West Parkway Eden Prairie, MN 55344 USA Customer Service Americas: 800-359-5520 952-225-6013 info@sanus.com Europe, Middle East, and Africa:
Agilent NFA Noise Figure Analyzer
Agilent NFA Noise Figure Analyzer Configuration Guide Dedicated Noise Figure Analyzer Hard specifications to 26.5 GHz Works with N4000A SNS or 346 Series noise sources Noise figure measurements to 110
NW2F8-12. Fixed Wall Racks INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Fixed Wall Racks Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description
Installation Instruction
Tools Needed for Assembly Stud finder (for wood stud wall) Pencil Mark Electric drill Wood Stud Wall Installation Step 1. Locate the Wood Studs Installation Instruction Drill bit (for wood stud wall) Masonry
Agilent NFA Noise Figure Analyzer
Agilent NFA Noise Figure Analyzer Configuration Guide Dedicated Noise Figure Analyzer Hard specifications to 26.5 GHz Works with N4000A SNS or 346 Series noise sources Noise figure measurements to 110
Debugging SENT Automotive Buses with an Oscilloscope APPLICATION NOTE
Debugging SENT Automotive Buses with an Oscilloscope Introduction Increasingly, automotive designs are adopting Single Edge Nibble Transmission (SENT) protocol for low-cost, asynchronous, point-topoint
30 A AC/DC Current Probe TCP0030A Datasheet
30 A AC/DC Current Probe TCP0030A Datasheet Split-core construction allows easy circuit connection High accuracy with typically less than 1% DC gain error Low noise and DC drift 3rd party safety certification
LE160 LE320 Linear Equalizer Datasheet Tektronix Linear Equalizer
LE160 LE320 Linear Equalizer Datasheet Tektronix Linear Equalizer USB programmable output duty cycle symmetry control Precision output level controls permit signaling from 0 (Return to Zero) well in excess
IMPORTANT WARNINGS AND CAUTIONS!
I N S T R U C T I O N M A N U A L The Christie Vivid Green ceiling mount will suspend your Christie Vivid Green projector in an upright position to compliment conference rooms, classrooms or home theater
Soldering a P7500 to a Nexus DDR Component Interposer
Soldering a P7500 to a Nexus DDR Component Interposer Introduction This document shows an example of how to solder P7500 tips to the oscilloscope version of a Nexus DDR Component Interposer board. The
Introducing a comprehensive range of New Indexable Thread Milling Tools and New Thread Milling Software for Tool Selection and CNC Programming
Januar 19, 2015 Page - 1 - Introducing a comprehensive range of New Indexable Tools and New Software for Tool Selection and CNC Programming TM24 Series TM25 Series TM40 Series TM41 Series KTMD-U Series
10 GHz Linear Amplifier PSPL5866 Datasheet
10 GHz Linear Amplifier PSPL5866 Datasheet The PSPL5866 amplifier has been designed to minimize the variations in gain and phase and to operate at very low frequencies. The PSPL5866 includes internal temperature
A701 ( <00>) 12 mm (7/16 in.)
A701 (6904-002018 ) Wood Stud 12 mm (7/16 in.) 2.4 mm (3/32 in.) 6 mm (15/64 in.) 3 mm (1/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988
Mounting Instruction. Compact Mini EGC Amplifier and Application
Mounting Instruction Compact Mini EGC Amplifier 93230 and 93240 Application The Compact Mini EGC Amplifier type 93230 and type 93240 has one active output and is mainly used as distribution amplifier.
Advancing the business of intellectual property globally.
Advancing the business of intellectual property globally www.lesi.org Advancing the business of intellectual property globally 2 WHAT IS LES? A premier global business association for licensing whose members,
MSP-DCCLFSD LCD Flat Screen Swing-Down Mount
INSTALLATION INSTRUCTIONS LCD Flat Screen Swing-Down Mount Perfect for home applications under kitchen cabinets or other rooms with a soffit. The LCD Flat Screen Swing-Down mount is a sturdy, versatile
EMI Core ESD-FPD-1 Series Split Cores with Plastic Clamp for Flat Cables. Split construction Nylon clamp
EMI Core ESD-FPD- Series Split Cores with Plastic Clamp for Flat Cables Overview The KEMET ESD-FPD- Series split cores are designed for use on flat cable. The series features a nylon clamp and is available
PAC521N INSTALLATION INSTRUCTIONS IN WALL ACCESSORY BOX
INSTALLATION INSTRUCTIONS IN WALL ACCESSORY BOX Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product
Precision Spectra OMG
Precision Spectra OMG Model SC-9315 CAUTION: Federal law restricts this device to sale, distribution and use by or on the order of a physician. 90870349-01 REV A This page intentionally left blank. 90870349-01
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Low Profile Tilt Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com
PatternPro Error Detector PED3200 and PED4000 Series Datasheet
PatternPro Error Detector PED3200 and PED4000 Series Datasheet Applications 25 Gb/s testing for 100G Ethernet 32 Gb/s DPQPSK testing Semiconductor and component testing Design validation and production
Comprehensive IP expertise, analytics and intelligence for the Asia Pacific region. Derwent Powering IP Innovation
Comprehensive IP expertise, analytics and intelligence for the Asia Pacific region Derwent Powering IP Innovation Clarivate Analytics IP Solutions for APAC 2 Asia s share of all patent applications filed
Using the 4200A-CVIV Multi-Switch to Make High Voltage and High Current C-V Measurements APPLICATION NOTE
Using the 4200A-CVIV Multi-Switch to Make High Voltage and High Current C-V Measurements Introduction Traditional capacitance-voltage (C-V) testing of semiconductor materials is typically limited to about
R&S ENV216 Two-Line V-Network For disturbance voltage measurements on single-phase EUTs
R&S ENV216 Two-Line V-Network For disturbance voltage measurements on single-phase EUTs Test & Measurement Data Sheet 03.00 R&S ENV216 Two-Line V-Network At a glance The R&S ENV216 two-line V-network meets
Desk/Wall-Mount Rack
Desk/Wall-Mount Rack Patent(s) Pending Installation Instructions Post P/N: 119-1752 119-1781 119-1782 119-4014 Frame P/N: 119-1591 119-1754 119-1755 Kit Contents (2) Frames (4) Posts Assembly Hardware
Agilent NFA Noise Figure Analyzer
Agilent NFA Noise Figure Analyzer Configuration Guide Dedicated Noise Figure Analyzer Hard specifications to 26.5 GHz Works with N4000A SNS or 346 Series noise sources Noise figure measurements to 110
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Universal Low Profile Flat Mount Model: U.S. Toll Free: 1-866-752-6271 Outside N. America: 1-503-748-5799 E-mail: ts@planar.com FRANCE Phone: +33 5 6378 3810 E-mail: emeats@planar.com
Elo Touch Solutions Wallmounting Kit for the 7001L IDS Touchmonitors
Installation Manual Elo Touch Solutions Wallmounting Kit for the 7001L IDS Touchmonitors SW602083 Rev E Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...
Overview. Applications. Benefits. Ordering Information. Sensors High Alternating Current Sensors, Snap-on Type
Sensors High Alternating Current Sensors, Snap-on Type Overview The C/CT-1216 clamp-on current sensor can be used to measure currents in live wires. Applications Typical applications include EMS current
Tektronix Logic Analyzer Probes P6800/P6900 Series Datasheet
Tektronix Logic Analyzer Probes P6800/P6900 Series Datasheet 6.5 V p-p dynamic range supports a broad range of logic families General-purpose probing allows flexible attachment to industrystandard connections
SAN22BB ( <00>)
SAN22BB (6904-002016 ) Wood Concrete Block or Solid 13mm (1/2 in.) 5.5mm (7/32 in.) 10mm (3/8 in.) Sanus Systems 2221 Hwy 36 West Saint Paul, MN 55113 USA Customer Service Americas: 800-359-5520 651-484-7988
Keysight Technologies 8490G Coaxial Attenuators. Technical Overview
Keysight Technologies 8490G Coaxial Attenuators Technical Overview Introduction Key Specifications Maximize your operating frequency range for DC to 67 GHz application Minimize your measurement uncertainty
NetShelter Recessed Rail Kit AR8010BLK
NetShelter Recessed Rail Kit AR8010BLK Inventory M6 screw (24) M6 caged nut (24) 6U 15U Horizontal brace (4) Horizontal brace (2); when using baying brackets 6U and 15U vertical mounting rail (4 each)
P7500 Series Probes Tip Selection, Rework and Soldering Guide
How-to-Guide P7500 Series Probes Tip Selection, Rework and For Use with Memory Component Interposers P7500 Series Probe Tip Selection, Rework and for Use with Memory Component Interposers Introduction
Universal flat-panel mount
R I N S T A L L A T I O N M A N U A L Universal flat-panel mount LISTED E176225 3130 E. Miraloma Ave. Anaheim, CA 92806 Phone: 800 368-9700 Fax: 800 832-4888 www.mounts.com PREMIER MOUNTS 2004/ REV 00
SAFETY THIS PRODUCT IS FOR OFFROAD USE ONLY. ALL LIABILITY FOR INSTALLATION AND USE RESTS WITH THE OWNER.
SAFETY Your safety and the safety of others is very important. In order to help you make informed decisions about safety, we have provided installation instructions and other information. These instructions
LCD TV WALL MOUNT INSTALLATION INSTRUCTIONS. DUAL Swing Arm (RFWD-110) WARNING
INSTALLATION INSTRUCTIONS LCD TV WALL MOUNT DUAL Swing Arm (RFWD-110) WARNINGS WARNING WARNING CAUTION CAUTION The maximum weight to be installed on the RFWD wall mount is 40 lbs. (18.1 kg). The RFWD is
Treasury and Trade Solutions Citi Commercial Cards. A History of Achievement. A Future of Innovation. May 19-21, 2014
Treasury and Trade Solutions Citi Commercial Cards A History of Achievement. A Future of Innovation. May 19-21, 2014 Communicating and Marketing Your Program Internally Pauline Smith Carla Vitaliano, The
Christie Duo Stacking Frame
Christie Duo Stacking Frame Installation Manual 020-101055-01 Christie Duo Stacking Frame Installation Manual 020-101055-01 NOTICES COPYRIGHT AND TRADEMARKS 2013 Christie Digital Systems USA Inc. All
ELPMB27. Short Throw Projector Wall Mount Installation Manual xxx(fr) xxx(de) xxx(it) xxx(es) xxx(pt) xxx(zhs)
ELPMB27 Short Throw Projector Wall Mount Installation Manual xxx(fr) xxx(de) xxx(it) xxx(es) xxx(pt) xxx(zhs) Safety Instructions Before using the wall mount, make sure you read all of the safety instructions
Keysight Technologies N9398C/F/G and N9399C/F DC Block. Technical Overview
Keysight Technologies N9398C/F/G and N9399C/F DC Block Technical Overview Introduction Key Features Maximize your operating range - 26.5, 50 or 67 GHz Improve calibration accuracy with exceptional return
Keysight Technologies Migrating Balanced Measurements from the
Keysight Technologies Migrating Balanced Measurements from the HP 8903B to the Keysight U8903A Audio Analyzer Application Note 02 Keysight Migrating Balanced Measurements from the HP 8903B to the U8903A