MICROHARDNESS TESTER HBS HBW
|
|
- Gwenda Webster
- 5 years ago
- Views:
Transcription
1 HV HK HBS HBW Kc
2 Color LCD touch panel/display coordinated with highly integrated PC board. Measuring procedures, conditions and data are displayed clearly. (FM-800 Series) Accurate light load Brinell Testing is available as a standard function. Necessary additional optional item Ball Indenter mm. (FM-800 Series) Kc value can be measured as a standard function according to JIS R607/ IF Method. Together with the value of Micro Vickers and Knoop, it is very effective to evaluate the quality of new material. (FM-800 Series) The changeable aperture diaphragm and field aperture with a newly developed light source mechanism provides more resolution at both high and low magnifications. Easily changeable color filter provides more resolution. (All Series) The newly designed measuring lines with 0.0 mm width can provide clear and accurate measurement. (All Series) Auto turret mechanism provides quick and correct sequence without rotating the turret manually. Capable of manual operation. (All Series) Type of test load is selectable. You can select from an abundance of loads and have own load combination(option/negotiable) Stage coordinate is indicated on the display in a link operation with the digital microhead (option). The new turret mechanism enables to observe wide specimen area with up to object lenses. Various magnifications easily available by rotating the correct objective into position. Placement of an indentation and its reading is more accurate and repeatable by choice of proper objective. (FM-800 Series) The new turret mechanism enables to adapt indenters simultaneously. It allows Vickers and Knoop tests without replacing the indenter. (FM-800 Series) POWER LOADING D HV HK LOW OK HIGH D LIGHT UP LIGHT DOWN RESET DWELL ENTER HV HK INC DEC START LIGHT LOADING START
3 Any Models on a Market Any Models on a Market
4 KNOOP INDENTER Rhombic diamond indenter for Knoop hardness TUNGSTEN CARBIDE BRINELL TEST BALL INDENTER φ mm HARDNESS FOR HV Standard for FM-00 Series and optional for FM-300 and FM-800 Series CALCULATION TABLE FOR HK Optional for all models 00 0 OBJECT LENS EYEPIECE 5 COLOR FILTER COLOR TEMPERATURE CONVERSION FILTER APERTURE DIAPHRAGM φ0 mm : Yellow & Blue (Standard : Green) For color TV measuring device φ~6 mm each selectable (6 kinds) FIELD APERTURE φ~7 mm each selectable (7 kinds) CAMERA MOUNTING TUBE For adapting photographic camera & CCD camera DIGITAL CAMERA ATTACHMENT C MOUNT ATTACHMENT (Digital camara is not included) TV MEASURING DEVICE Black & White Color B & W CCD camera + 8." LCD Color CCD camera + " CRT Monitor AUTOMATIC READING SYSTEM AR90 After focusing, tow diagonal lengths of indent shall be measured and displayed automatically in a moment. Measurement time : Approx. 0.3 sec / indent Components : CCD camera (B & W) + PC + Printer + AR Software AUTOMATIC X-Y STAGE & CONTROL UNIT AS90 Automatic X-Y stage : Max. movement : 50mm Min. micro inching : μm Dimensions : 0 x 0 mm Components : Auto-stage + Motor drive unit + PC + Printer + AS Software SEMI-AUTOMATIC MEASURING SYSTEM WITH AUTO-STAGE ASV90 The combined system of AS and CCD camera. Operator can measure the indentation manually on the CRT by using two measuring lines. Components : Auto-stage + Motor drive unit + CCD camera (B & W) + PC + Printer + ASV Software AUTOMATIC MEASURING SYSTEM WITH AUTO-STAGE ARS900 The combined system of AR and AS Components : Auto-stage + Motor drive unit + CCD camera (B & W) + PC + Printer + ARS Software PRECISION VISE Max. opening : 00mm ROTARY TABLE Graduation of rotary angle : 5 degree Table diameter : φ8mm THIN SPECIMEN MEASURING DEVICE Specimen thickness : 5mm max. FINE SPECIMEN MEASURING DEVICE VERTICAL TYPE HORIZONTAL TYPE Specimen diameter : φ5mm max. (For measuring the cross section) Specimen diameter : φ5mm max. (For measuring the cylindrical surface) SPECIMEN INCLINING DEVICE Specimen height : 5 0 mm (For mounted specimen) UNIVERSAL INCLINING VISE Inclining device + Vise Max. opening : 5mm DIGITAL PRINTER RS3C type Bubble Jet type (For Hardness Tester) (For Automatic System) LASER PRINTER Any models on a market (For Automatic System) VIDEO GRAPHIC PRINTER By SONY or MITSUBISHI (For TV measuring System) VIBRATION INSULATION STAND MAGMATE-FT (Magnet floating type) / AIRMATE- FT (Air & Rubber type) MECHANICAL PARTS FOR ADDITIONAL OBJECT LENS Mechanical parts on turret for additional third and fourth object lenses. Additional lenses should be specified when placing order. Possible to install additional lenses only in our factory. DUAL INDENTER TURRET Specially designed turret could be available for adapting two indenters (HV + HK ) simultaneously. Impossible to change a Single Indenter Turret to Dual Indenter Turret at customer's site. Please indicate when ordering.
5 TYPE A TYPE B TYPE C TYPE D TYPE E LOADING MECHANISM LOAD APPLYING SPEED Automatic Load and Release Method 60μm/ sec DWELL TIME 5 0 sec 5 99 sec TURRET MECHANISM Manual Automatic Manual Automatic Manual Automatic Standard Option Vickers Indenter (HV) Knoop Indenter (HK) / Two Indenters (HV + HK) are available on the special Dual Indenter Turret simultaneously Standard Option Max. 3 Lenses ( X 50 & X 0 plus Lenses) Lenses ( X 50 & X 0) Max. Lenses ( X 50 & X 0 plus Lenses) EYEPIECE X 0 Type Max. measurement length Min. graduation Min. measurement unit Type Dimensions Max. movement Min. micro graduation Option Mechanical In case of X 00: 850 m / In case of X 500 :70 m Micrometer : 0.5 m Digital : 0.0 m (In case of X 500) Eye judgement : 0. m Digital microhead Manual 00 x 00 mm (X) 5 x (Y) 5 mm /00 mm Max. opening 50 mm Electronic Digital : 0.0 m (In case of X 500) Digital microhead (Panel display) MAX. HEIGHT OF SPECIMEN 95 mm MAX. DEPTH OF SPECIMEN 5 mm TEST PARAMETER HV / HK HV / HK / HBS / HBW / Kc FRACTURE TOUGHNESS TEST (Kc) Conform to JIS R807 / IF Method HARDNESS CONVERSION Conform to SAE (J-7b) & ASTM (E-0) OPERATION PANEL (SHEET SW for FM-00 / 300 Series & TOUCH PANEL SW for FM-800 Series) START / LIGHT UP-DOWN / TURRET ROTATION (For Auto -Turret Type) START/ RESET/ DWELL TIME / LIGHT UP-DOWN / TURRET ROTATION (For Auto-Turret Type) START/ RESET/DWELL TIME / LIGHT UP-DOWN / TEST LOAD / CONVERSION SCALE / TURRET ROTATION (For Auto-Turret Type) / CLEAR DATA DISPLAY (LED for FM-00 / 300 Series & LCD for FM-800 Series) DATA OUTPUT & PRINT OUT OK / NG CRITERIA POWER / LOADING (Pilot Lamp) D/ D / HV-HK / HARDNESS VALUE / LOADING / OK-NG CRITERIA RS3C (HV- HK / HARDNESS VALUE/ OK- NG) CENTRONICS (D/ D / HV- HK / HARDNESS VALUE / TEST LOAD / OK-NG) Limit setting and HI / OK /LO display D/ D / HV-HK / HARDNESS VALUE / CONVERSION DATA /OK-NG CRITERIA / START(Blinking for Loading)/TEST TIMES / etc. RS3C / CENTRONICS (D/ D / HV-HK / HARDNESS VALUE /TEST LOAD / OK-NG /CONVERSION SCALE / CONVERSION DATA / STATISTIC DATA / etc.) SELF DIAGNOSIS Display troubles with motors and switches LIGHT SOURCE OPTICAL FUNCTION 6 V / 8 W (Auto-iris mechanism) Aperture diaphragm / Field aperture / Color filter : Replaceable ACCURACY Conform to JIS B -773 /B-775, ASTM E-38, and ISO PHOTOGRAPHIC DEVICE DIMENSIONS WEIGHT POWER SUPPLY Capable to mount at anytime on top of the machine (Camera / Attachment : Option) (W) 86 x (D) 50 x (H) 50 mm Approx. 0 kg (Including Standard Accessories) Japan : Single phase AC 00V 50 / 60Hz Overseas : Single phase AC 00 0V 50 / 60Hz(Should be specified before shipment)
6 STANDARD ACCESSORIES CODE NO. ITEM F M e F M - 00 F M e F M F M e F M -800 M-06 X -Y STAGE M-07 PRECISION VISE ( HV 700 ) M-037 STANDARD TEST BLOCK M-03 DIAMOND INDENTER PYRAMID M-0 MEASURING MICROSCOPE ( WI T H X 0 EYEPIEC MECHANICAL TYPE ELECTRONIC TYPE X 50 X 0 ( 6 V 8 W ) 00 0V A 00 0V A 00 0V A POWER CORD AUXILIARY TOOL S ( SCREW DRIVE R : + PC & PC & L WRENC H : PCS ) FOR VICKERS M-0 M-06 M-08 OBJECT LENS ( BUILT - IN ) M-05 LEVEL ADJUSTING LEG E) M-066 LEVEL M-053 INDENTER COVER M-055 MACHINE COVER M-0 SPARE LIGHT SOURCE BULB M-05 SPARE FUSE M-05 M-039 M-056 ( BUILT -IN ) ( BUILT - IN ) HARDNESS CALCULATION TABLE HARDNESS CONVERSION TABLE INSTRUCTION & MAINTENANCE MANUAL ACCESSORY BOX F M -300 Digital Microhardness Tester Appearance and specifications are subject to change without p F M -00 Analog Microhardness Tester rior notice. Agent : HEAD OFFIC JCSS 08 We are based on JIS Q 705 (ISO/IEC 705) as accredited standards, and accredited by JCSS who manages the recognition scheme according to ISO/IEC 70. IA Japan (accreditation organization who has managed JCSS) who is signatory to the Mutual Recognition Arrangement (MRA) of International Laboratory Accreditation Cooperation (ILAC) and Asia Pacific Laboratory Accreditation Cooperation (APLAC). We are accredited as MRA Calibration Laboratory of JCSS. Our accreditation number is JCSS 08. No.7 ISO 900 E TALKPIER KAWASAKI BLDG., NO. 5-, 3-CHOME, FUJISAKI, KAWASAKI-KU, KAWASAKI, KANAGAWA, JAPAN TE L FAX E - mai l : info f t -hardness. com UR L : htt p : // www. f t -hardness. com EUROPEAN REPRESENTATIVE OFFICE : VIA BERNINI 5/7, 009 CORSICO, MILAN, ITALY TEL: FAX: cantoni.fte@gmail.com USA OFFIC E 6590 RYAN COURT, NOVI, MI 8377, USA TEL: FAX: mantonik@sunteccorp.com : ASIA PRODUCTS SUPPORT CENTRE S IN G A P O R E : 7, MANDAI ESTATE, #06-3, INNOVATION PLACE TOWER, SINGAPORE T EL: FAX: E - mai l : ft.hardness@gmail.com OSHMA SRL. Trayectoria de calidad para su calidad 30 de Septiembre (ex Warnes) Temperley, Buenos Aires, Argentina (005) 9767 info@oshma.com.ar Printed in Japan 0.. T ②
LOAD-CELL TYPE AUTOMATIC VICKERS HARDNESS TESTER. Series. Controlled by high performanace software FT-ZERO
LOAD-CELL TYPE AUTOMATIC VICKERS HARDNESS TESTER Series Controlled by high performanace software FT-ZERO FULLY-AUTOMATIC VICKERS HARDNESS TESTING SYSTEM Series Fully-Automatic Microhardness / Vickers Hardness
More informationC227-E013B. HMV-2 series. Shimadzu Micro Hardness Tester
C227-E013B HMV-2 series Shimadzu Micro Hardness Tester Automatic Force Change Function, Windows Direct link-up Function, Superior User Interface. HMV-2 Series HMV-2 Series Shimadzu Micro Hardness Tester
More informationMicro Vickers Hardness Tester. HMV-G Series C227-E025B
Micro Vickers Hardness Tester HMV-G Series C227-E025B Hardness Testers Featuring Automatic Length Measurement are the New Standard Everyone is an expert In recent years, instruments have been increasingly
More informationHVS-1000DN. Digital Micro Vickers Hardness Tester. BMS Bulut Makina Sanayi Ve Ticaret Ltd. Şti.
OPERATIONAL MANUAL HVS-1000DN Digital Micro Vickers Hardness Tester BMS Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No : 7-9 Başakşehir / İSTANBUL-TURKEY
More informationAutomatic hardness testing devices
Automatic hardness testing devices The measure of hardness, applied to rubber and plastic, is a measure of stiffness obtained from an indentation test. An indentor is pressed into the sample under a given
More informationthe image analysis people
Clemex CMT Computerized Microhardness Testing Clemex CMT (automatic) the image analysis people Modular Solutions Clemex CMT (automatic) Clemex CMT (semi-automatic) Clemex CMT Lite When you need a microhardness
More informationVERZUS 700AS Universal hardness tester
VERZUS 700AS VERZUS 700AS Universal hardness tester Heavy duty, load cell, closed loop, force feedback system, no weights, automatic load setting Microscope with digital eyepiece Specimen lighting with
More informationProduct and Measurement Solutions for the Automotive Industry
Product and Measurement Solutions for the Automotive Industry Car body and vehicle related measurement solutions P.4-5 Acceleration noise measurement Acceleration Noise Measurement System Measurement of
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. NORTHSTAR CALIBRATION, INC th Place NW Owatonna, MN John Moorhouse Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 NORTHSTAR CALIBRATION, INC. 1045 26th Place NW Owatonna, MN 55060 John Moorhouse Phone: 507 444 9111 CALIBRATION Valid To: February 29, 2020 Certificate Number:
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited NORTHSTAR CALIBRATION, INC. Owatonna, MN for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International
More information600 SERIES Rockwell hardness tester. 600A 600MA 600MA/S Manually operated Motorized Motorized Superficial
600 SERIES 600 SERIES Rockwell hardness tester 600A 600MA 600MA/S Manually operated Motorized Motorized Superficial FEATURES Basic regular Rockwell type tester (600A/MA/BD/MBD) and Superficial Rockwell
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & Z540.3-2006 INSPEC, INC. 7282 Haggerty Rd Canton, MI 48187 Thomas Snyder Phone: 734 451 8740 CALIBRATION Valid To: July 31, 2019 Certificate
More informationOMM300. Inverted Metallurgical Microscope
OMM300 Inverted Metallurgical Microscope Instruction Manual Please read the instructions carefully before operating CONTENTS Safety 2 Parts List 2 Features 3 Assembly 5 Operation 7 Maintenance 9 Specifications
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 MITUTOYO AMERICA CORPORATION 965 Corporate Blvd Aurora, IL 60502 Amosh Kumar Phone: 888 648 8869 CALIBRATION
More informationCARAT 930/950. Hardness Testing & Analysis CARAT 930 / 950
STABLE CONSTRUCTION The vibration-damped cast aluminum body comprises a robust basis for the high load-bearing Carat table with automatic X/Y axis and automatic Z axis with 8-times objective revolver (LED
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & Z540.3-2006 INSPEC, INC. 7282 Haggerty Rd Canton, MI 48187 Dale Robenault Phone: 734 451 8740 CALIBRATION Valid To: September 30,
More informationEnvironmental Sound Monitor NA-37 E n v i r o n m e n t a l S o u n d M o n i t o r (For Environmental Measurement) NA-37
Easily Monitor Road Traffic Noise, Factory Noise, Construction Noise It complies with the manual of the Evaluation of Environmental Quality Standards for Noise. Environmental Sound Monitor The is capable
More informationDigital scales description S_System LIN Precision measuring set for new development and retro-fitting Easy to integrate in your projects Small overall
Digital scales description S_System LIN Precision measuring set for new development and retro-fitting Easy to integrate in your projects Small overall dimensions USB or RS-232 connectivity Software development
More informationPRECISION CUTTING MICRACUT 202
PRECISION CUTTING MICRACUT 202 MICRACUT 202 MICRACUT 202 precision cutters are used for precise and deformation-free cutting of Metals, Ceramics, Electronic Components, Crystals, Composites, Biomaterials,
More informationMicro IRHD Laser revolution
Micro IRHD Laser revolution Micro-IRHD Hardness tester with laser centring device and rotating sample holder for the automatic serial measure of O-rings and small rubber parts The instruments is supplied
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationTABLE OF CONTENTS. Safety notes i. Care and Maintenance. ii. 1. Components Illustration Installation of Components.. 4
TABLE OF CONTENTS Safety notes i Care and Maintenance. ii 1. Components Illustration... 1 2. Installation of Components.. 4 2.1 Installation Diagram... 4 2.2 Installation Procedures 5 3. Operation...11
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI-NCSLI Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ANSI-NCSLI Z540-1-1994 QUALITY CALIBRATION SERVICE, INC. 5515 S Westridge Dr. New Berlin, WI 53151 Martin Lukomski Phone: 414 256 8900 CALIBRATION Valid To:
More informationVIBRATION ANALYZER. Vibration Analyzer VA-12
VIBRATION ANALYZER Vibration Analyzer VA-12 Portable vibration analyzer for Equipment Diagnosis and On-site Measurements Vibration Meter VA-12 With FFT analysis function Piezoelectric Accelerometer PV-57with
More informationA Revolution in Information Management
Conforms to SEMI Standards Upgraded with New Functions Suitable for Reading Dot Cell Codes A Revolution in Information Management Actual size Industry's smallest head (without lens) V530-R150E-2, V530-R150EP-2
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 JAPAN QUALITY ASSURANCE ORGANIZATION Kyushu testing office 2-33, Miyanojin 3-Chome, Kurume-shi, Fukuoka, 839-0801 Japan Masaya Ishimaru Phone: 81 942 48 7763
More informationManual for BMS E1 eplan series, compound microscope
Manual for BMS E1 eplan series, compound microscope The compound microscope allows it to study, at cell level, structures of textures of botanical and zoological nature. (e.g. slides of roots, leaves and
More informationDiscover the world of hardness testing
Discover the world of hardness testing Product Range www.emcotest.com Large product range. Further info at www.emcotest.com N6 N7 N4 N3A Intest hardness tester for Ø 36 110 mm insertion depth up to 400
More informationHitachi Vision System MC-20S
Hitachi Vision System MC20S Reduce Production waste by incorporating Hitachi's Vision System with our legendary small character printer. Hitachi Vision System MC20S working with Hitachi IJ printer for
More informationCertificate of Accreditation
Certificate of Accreditation ISO/IEC 17025:2005 Certificate Number L1050-1 The Tool & Gage House Quality Services Division 538 E. Hebron Street Charlotte NC 28273 has met the requirements set forth in
More informationMN-ISHB-B300-E ISHB-B300 BARCOL HARDNESS TESTER OPERATION MANUAL
MN-ISHB-B300-E www. insize. com ISHB-B300 BARCOL HARDNESS TESTER OPERATION MANUAL V0 Introduction Barcol hardness tester is a kind of indentation hardness tester originally made in the USA. It has 3 models
More information1. Features Calibration Compensator Lock Button Circular bubble Line-of-sight...10
CONTENTS 1. Features... 2 2. Using the instrument... 5 2.1 Setting Up and Centering the Bubble...5 2.2 Focusing the Instrument...6 2.3 Reading Measurements Using a Leveling Rod...7 2.3.1 Height Reading...7
More informationUser Manual. Trinocular Metallurgical Microscope. MicroscopeNet.com
User Manual Trinocular Metallurgical Microscope Model M83MPTR MicroscopeNet.com Table of Contents i. Caution.. 1 ii. Care and Maintenance... 2 1. Components Illustration..... 3 2. Installation...4 3. Operation
More informationCalibration Laboratory Assessment Service CLAS Certificate Number Page 1 of 19
Calibration Laboratory Assessment Service CLAS Certificate Number 2000-03 Page 1 of 19 Transmation Canada nc. 916 Gateway Canada L7L 5K7 Contact: Robert Whittaker Tel (905) 632-5869 Toll Free (800) 897-0067
More informationE/ECE/324/Rev.1/Add.64/Rev.2/Amend.2 E/ECE/TRANS/505/Rev.1/Add.64/Rev.2/Amend.2
17 October 2014 Agreement Concerning the Adoption of Uniform Technical Prescriptions for Wheeled Vehicles, Equipment and Parts which can be Fitted and/or be Used on Wheeled Vehicles and the Conditions
More informationHandheld Ref/Keratometer / Handheld Refractometer HandyRef-K / HandyRef
Handheld Ref/Keratometer / Handheld Refractometer HandyRef-K / HandyRef A valued assistant that is always at hand Wouldn t you want to be able to take an accurate measurement anytime and anywhere? NIDEK
More informationSTEINDORFF NYMC Polarizing Microscope
NYMC38000 Polarizing Microscope In order to exert performance of this microscope and to ensure the safety, please read the operating instruction carefully before use. 1 I. APPLICATION: NYMC38000 series
More informationPAINT BORER 518 MC PAINTXPLORER 548
PAINT BORER 518 USB PAINT BORER 518 MC PAINTXPLORER 548 PAINT BORER 518 USB Thickness measurements in accordance with the standardised wedge cut method PAINT BORER 518 MC PAINTXPLORER 548 testing equipment
More informationXSP-100XSP-100SM/ OF BIOLOGICAL MICROSCOPE OPERATION MANUAL READ THIS MANUAL BEFORE USING THE MICROSCOPE
XSP-100XSP-100SM/ OF BIOLOGICAL MICROSCOPE OPERATION MANUAL READ THIS MANUAL BEFORE USING THE MICROSCOPE XSP-100XSP-100SM OF BIOLOGICAL MICROSCOPE OPERATION MANUAL Ⅰ.Application XSP-100/XSP-100SM of biological
More informationOM FL400. Reflected Light Fluorescence Microscope. Instruction Manual. Please read instructions carefully before using microscope.
OM FL400 Reflected Light Fluorescence Microscope Instruction Manual Please read instructions carefully before using microscope. Contents Safety ---------------------------------------------- 2 Parts List
More informationUser Manual. Digital Compound Binocular LED Microscope. MicroscopeNet.com
User Manual Digital Compound Binocular LED Microscope Model MD82ES10 MicroscopeNet.com Table of Contents i. Caution... 1 ii. Care and Maintenance... 2 1. Components Illustration... 3 2. Installation...
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 QUALITY TESTING SERVICES, INC. 2305 Millpark Drive Maryland Heights, MO 63043 Heather Ryan Phone: 314 770 0607 CALIBRATION Valid To:
More informationBringing Answers to the Surface
3D Bringing Answers to the Surface 1 Expanding the Boundaries of Laser Microscopy Measurements and images you can count on. Every time. LEXT OLS4100 Widely used in quality control, research, and development
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Precision Repair and Calibration 9150 Isanti
More informationHuvitz Digital Microscope HDS-5800
Huvitz Digital Microscope HDS-5800 Dimensions unit : mm Huvitz Digital Microscope HDS-5800 HDS-MC HDS-SS50 The world s first, convert the magnification from 50x to 5,800x with a zoom lens HDS-TS50 Huvitz
More informationFSM-30P SPECIFICATIONS FOR FIBER FUSION SPLICER 1. GENERAL
Page : 1 SPECIFICATIONS FOR FSM-30P FIBER FUSION SPLICER 1. GENERAL These specifications cover the FSM-30P fiber fusion splicer. This splicer features some new functions and improvements for factory use,
More informationWE BRING QUALITY TO LIGHT DTS 500. Positioner Systems AUTOMATED DISPLAY AND LIGHT MEASUREMENT
WE BRING QUALITY TO LIGHT DTS 500 Positioner Systems AUTOMATED DISPLAY AND LIGHT MEASUREMENT Standalone XYZ positioners (260 to 560 mm max. travel range) Standalone 2-axis goniometers (up to 70 cm diagonal
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
42 Westfield Road Kings Heath Birmingham B14 7ST Contact: Mr J W Chandler Tel: +44 (0)121-444 4354 Fax: +44 (0)121-441 1838 E-Mail: jonathan@starindustrialtools.co.uk Calibration performed at the above
More informationDatasheet. Variable Impact Tester. Elcometer 1615
Variable Impact Tester This simple to use gauge is ideal for evaluating the resistance of a coating to impact (elongation, cracking or peeling), and is suitable for use on both direct and indirect test
More informationDOC. NO. FT02000-S E FULLY AUTOMATIC PROBER SPECIFICATIONS TOKYO SEIMITSU CO., LTD.
DOC. NO. FT02000-S 0 0 1- E1 1 1-18 -9 7 FULLY AUTOMATIC PROBER SPECIFICATIONS TOKYO SEIMITSU CO., LTD. TOKYO, JAPAN Contents of this document may be subject to change without notice. No part of this document
More informationNon-Mydriatic Auto Fundus Camera AFC-330
Non-Mydriatic Auto Fundus Camera AFC-330 The Smart Fundus Camera What is the smart fundus camera? It is a camera that is sophisticated, technologically advanced, and user-friendly. The AFC-330 speaks for
More informationDurst HL 2506 AF. Durst HL 2506 AF
Durst HL 2506 AF Durst HL 3506 AF Professional horizontal enlarger for colour and BW-enlargements from film formats up to 25 x 25 cm (10 x 10 in.) with computer driven Permanent Closed Loop light monitoring
More informationElasticity & Deformation. Elcometer 1615 Variable Impact Tester. elcometer.com 1
Variable Impact Tester elcometer.com 1 Variable Impact Tester This simple to use gauge is ideal for evaluating the resistance of a coating to impact (elongation, cracking or peeling), and is suitable for
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationMS260i 1/4 M IMAGING SPECTROGRAPHS
MS260i 1/4 M IMAGING SPECTROGRAPHS ENTRANCE EXIT MS260i Spectrograph with 3 Track Fiber on input and InstaSpec IV CCD on output. Fig. 1 OPTICAL CONFIGURATION High resolution Up to three gratings, with
More informationMN-ISHB-H131-E ISHB-H131 HYDRAULIC BRINELL HARDNESS TESTER OPERATION MANUAL
MN-ISHB-H131-E www. insize. com ISHB-H131 HYDRAULIC BRINELL HARDNESS TESTER OPERATION MANUAL V0 Introduction ISHB-H131 Hydraulic Brinell hardness tester has the same structure as King Brinell hardness
More informationContour Measuring System CONTRACER CV-2100 Series
Form Measurement Contour Measuring System CONTRACER CV-2100 Series Catalog No. E15020(2) Remarkable operability and functionality revolutionize contour measuring systems and enable measurement that is
More informationCATALOG No. US FORMTRACER CS Hybrid Surface Contour Measuring Machine
CATALOG No. US4220-525 FORMTRACER CS-5000 Hybrid Surface Contour Measuring Machine FORMTRACER CS-5000 Wide-range & highresolution detector! Patent registered (Japan, U.S.A., England) Patent pending (Japan,
More informationSEIMITU WAVE AR1260. Allegro. Mobility LLC
SEIMITU WAVE Allegro AR1260 Mobility LLC 3-5-6, Zenpukuji, Suginami-ku, Tokyo 167-0041 Japan Tel : 81-03-6454-7730 Fax : 81-03-6454-7292 E-Mail : info@mobilityjapabcom URL : http://wwwmobilityjapancom/
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Cornerstone Metrology Service Inc. 7625 Hayvenhurst Ave. #20 Van Nuys Ca. 91406 Keith Chauvie Director of Quality Phone: 818 902-9551
More informationSAMPLE PREPARATION SPECTRAL MMAX. metkon.com
SAMPLE PREPARATION SPECTRAL MMAX metkon.com FULLY AUTOMATIC FINE SURFACE MILLING MACHINE SPECTRAL MMAX The SPECTRAL MMax is designed for fully automatic sample preparation of steel and cast iron as well
More informationFaster, Easier and More Accurate AUTO LENSMETER LM-1200/1000(P)
Faster, Easier and More Accurate AUTO LENSMETER LM-1200/1000(P) Auto Lensmeters LM-1200 / 1000(P) Advanced & Dynamic Technologies Provide for Faster, Easier and More Accurate Measurement Faster & Easier
More informationINTERFEROMETER VI-direct
Universal Interferometers for Quality Control Ideal for Production and Quality Control INTERFEROMETER VI-direct Typical Applications Interferometers are an indispensable measurement tool for optical production
More informationAMCON LENSOMETER USER S MANUAL EQ Fax
AMCON LENSOMETER USER S MANUAL EQ-6001 1-800-255-6161 Fax 1-800-397-0013 www.amconlabs.com CONTENTS Description and Usage... 2 Main Technical Index... 2 Principle of Operation... 2 Functions of Major Components...
More informationMarine Invertebrate Zoology Microscope Introduction
Marine Invertebrate Zoology Microscope Introduction Introduction A laboratory tool that has become almost synonymous with biology is the microscope. As an extension of your eyes, the microscope is one
More informationISHR-M111 MAGNETIC ROCKWELL HARDNESS TESTER OPERATION MANUAL
MN-ISHR-M-E www.insize.com ISHR-M MAGNETIC ROCKWELL HARDNESS TESTER OPERATION MANUAL Attention This Instruction Manual shall be carefully read through in prior to use of the apparatus to clearly understand
More informationNon-Mydriatic Auto Fundus Camera AFC-330
Non-Mydriatic Auto Fundus Camera AFC-330 The Smart Fundus Camera What is the smart fundus camera? It is a camera that is sophisticated, technologically advanced, and user-friendly. The AFC-330 speaks for
More informationMetrology Prof. Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere. Lecture 24 Measurement of Screw Thread Element
Metrology Prof. Dr Kanakuppi Sadashivappa Bapuji Institute of Engineering and Technology Davangere Lecture 24 Measurement of Screw Thread Element I welcome you all for the module 6 lecture 2, in this lecture
More informationMEASURING MACHINES. Pratt & Whitney METROLOGY LABORATORY. Measurement Systems, Inc.
METROLOGY LABORATORY Pratt & Whitney Measurement s, Inc. METROLOGY LABORATORY The Standard of Accuracy Pratt & Whitney Metrology Laboratory Machines are the standard to which all other gages are held subordinate.
More informationANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 Precision Repair and Calibration 9150 Isanti Street NE Blaine, MN 55449 Jane McDougall
More informationELECTRONIC DOUBLE HEAD CUTTING MACHINE 500 TS
ELECTRONIC DOUBLE HEAD CUTTING MACHINE 500 TS 500 TS - 500 CD - 500 D2K Electronic double head cutting machine The double head cutting machines made by Pertici boast unique features in terms of build quality
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NSCL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NSCL Z540-1-1994 INSPECTION MEASUREMENT COMPANY 2291 Byron Center Ave. S.W. Wyoming, MI 49519-1651 Paul R. Kragt Phone: 616 531 3303 CALIBRATION Valid
More informationSTRUCTURE OF THE MICROSCOPE
STRUCTURE OF THE MICROSCOPE Use the word list to label the microscope below: Light Source Coarse adjustment knob Diaphragm Stage Clips Objectives Fine Adjustment Knob Base Stage Stage Clips Arm Revolving
More informationOPTIV CLASSIC 321 GL TECHNICAL DATA
OPTIV CLASSIC 321 GL TECHNICAL DATA TECHNICAL DATA Product description The Optiv Classic 321 GL offers an innovative design for non-contact measurement. The benchtop video-based measuring machine is equipped
More informationTECHNICAL SPECIFICATIONS for 300KV CONSTANT POTENTIAL X RAY EQUIPMENT (for industrial applications) S. No. PARTICULARS BHEL SPECIFICATIONS
TECHNICAL SPECIFICATIONS for 300KV CONSTANT POTENTIAL X RAY EQUIPMENT (for industrial applications) BIDDER s OFFER S. No. PARTICULARS BHEL SPECIFICATIONS 1.0 Area of Application The 300kV Constant potential
More informationInstruction Manual. Automatic Levels Model No , ,
4579H_Manuals 4/4/11 8:37 AM Page 1 Automatic Levels Model No. 40-6926, 40-6960, 40-6962 Instruction Manual Congratulations on your choice of this Automatic Level. We suggest you read this instruction
More informationLeeb Hardness Tester User's Manual To maximize the benefits of your new tester, please take some time to read these Operating Instructions. ALL RIGHTS RESERVED 00 Table A CONTENTS Features and Specifications....
More informationStereo Viewing Systems
Includes NEW image capture option Stereo Viewing Systems Superior imaging for a wide range of inspection & rework tasks Patented optical technology for fatigue-free viewing and superb image quality Wide
More informationISO Microscopes Marking of objectives and eyepieces. Microscopes Marquage des objectifs et des oculaires. Second edition
INTERNATIONAL STANDARD ISO 8578 Second edition 2012-06-01 Microscopes Marking of objectives and eyepieces Microscopes Marquage des objectifs et des oculaires Reference number ISO 2012 ISO 2012 COPYRIGHT
More informationSpotOptics. The software people for optics OPAL O P A L
Spotptics The software people for optics UTMTED WVEFRNT SENSR ccurate metrology of standard and aspherical lenses (single pass) ccurate metrology of spherical and flat mirrors (double pass) =0.3 to =50
More informationArtisan Technology Group is your source for quality new and certified-used/pre-owned equipment
Artisan Technology Group is your source for quality new and certified-used/pre-owned equipment FAST SHIPPING AND DELIVERY TENS OF THOUSANDS OF IN-STOCK ITEMS EQUIPMENT DEMOS HUNDREDS OF MANUFACTURERS SUPPORTED
More informationSTEINDORFF Digital LCD Biological Microscope
Digital LCD Biological Microscope -1260/ -1261 Instruction Manual Thanks for purchasing this digital LCD biological microscope. This user s manual is for item number -1260 & -1261. In order to operate
More informationPICO MASTER 200. UV direct laser writer for maskless lithography
PICO MASTER 200 UV direct laser writer for maskless lithography 4PICO B.V. Jan Tinbergenstraat 4b 5491 DC Sint-Oedenrode The Netherlands Tel: +31 413 490708 WWW.4PICO.NL 1. Introduction The PicoMaster
More informationMEASURING PROBES, DIGITAL DISPLAYS AND BENCH TABLES
MEASURING PROBES, DIGITAL DISPLAYS AND BENCH TABLES The Sylvac linear probes are based on the capacitive principle characterized by a high degree of accuracy also on long measuring ranges up to 50mm. The
More informationNEMESIS 9000RS TM. Rockwell Hardness Tester
NEMESIS 9000RS TM Rockwell Hardness Tester ROCKWELL STANDARDIZING HARDNESS TESTER NEMESIS 9000RS Load cell, closed loop, linear force actuator, fixed workpiece position Flexible modular design Force configuration
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationHybrid Surface Contour Measuring Machine FORMTRACER CS-5000
Form Measurement Hybrid Surface Contour Measuring Machine FORMTRCER CS-5000 CTLOG No. E4220-525 hybrid surface contour measuring machine that combines contour and surface roughness measurements and analyses
More informationA Full Line-up of Digital and Analog Clamp Meters to Suit Any Need
CLAMP ON HiTESTER SERIES Field measuring instruments A Full Line-up of Digital and Analog Clamp Meters to Suit Any Need From Basic Testing to High Performance Analysis 2 Selection Guide A Complete HIOKI
More informationEmbargo: January 24, 2008
Embargo: January 24, 2008 PENTAX Optio S12 A stylish compact digital camera that pursues higher image quality with an increased approximately 12.0 effective megapixels PENTAX Corporation is pleased to
More informationSuper High Vertical Resolution Non-Contact 3D Surface Profiler BW-S500/BW-D500 Series
Super High Vertical Resolution Non-Contact 3D Surface Profiler BW-S500/BW-D500 Series Nikon's proprietary scanning-type optical interference measurement technology achieves 1pm* height resolution. * Height
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 JOHNSON GAGE AND INSPECTION 5920 W. 21st Street North Wichita, KS 67205 Scott Porter Phone: 316-943-7532 CALIBRATION Valid To: March
More informationULISSE COMPACT THERMAL
2014/01/20 UNIT WITH INTEGRATED THERMAL AND DAY/NIGHT CAMERAS MAIN FEATURES Variable speed: 0.1-200 /s Pan/Tilt Horizontal continuous rotation, vertical -90 /+90 IP66 Dual independent video output Complete
More informationSIEVE CERTIFICATION SYSTEM
MACHINE VISION SYSTEMS AND TECHNOLOGY Tel: (781) 275-2020 Fax: (781) 275-2028 www.vision-machines.com SIEVE CERTIFICATION SYSTEM Ensure ASTM E11 Compliance! Automated Sieve Certification System (ASCS)
More informationTIMTOS 2017 EXHIBITS PROFILE
TIMTOS 2017 EXHIBITS PROFILE Product Code Product Name METAL CUTTING MACHINE TOOL Lathes and Turning Machines 160101 Lathes, Swiss Type 160502 Bench Lathes 160503 High Speed Lathes 160504 Automatic Lathes
More informationWeld Checkers RESISTANCE WELDING
KEY FEATURES Lower scrap rate Improved process control ISO 9000 data collection Decreased machine downtime Accurate machine set up Weld optimization and Design of Experiments (DoE) Welding process diagnostics
More informationDOCUMENT CAMERA. TT-02s. Teacher s Tool
DOCUMENT CAMERA TT-02s Teacher s Tool Seeing is Believing... Retaining and Learning Students are fascinated by digital image technology like the video games they play at home, but how often do they see
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 CAL-TEC, INC. 114 Thruway Park Road Broussard, LA 70518 Chris Grevemberg Phone: 337 839 0450 Email: lab@caltecinc.com CALIBRATION Valid
More informationOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS Rotary Microtome CUT 4062 / CUT 5062 / CUT 6062 CUT 6062 illustrated above INS1000GB 2012-01-06 Instructions CUT4062 / CUT 5062 / CUT 6062 2 CONTENTS 1. INTENDED USE... 4 2. SYMBOLS...
More informationIntelligent Refractor RT-5100
Intelligent Refractor RT-5100 RT-5100 Reliability and Technology Assured 2 technology Reliable 3 Usability page page Experience the excellence with the RT-5100. Do you know what RT stands for? Originally
More informationGCMS-3 GONIOSPECTROPHOTOMETER SYSTEM
MURAKAMI Color Research Laboratory 11-3 Kachidoki 3-Chome Chuo-Ku Tokyo 104 Japan Tel: +81 3 3532 3011 Fax: +81 3 3532 2056 GCMS-3 GONIOSPECTROPHOTOMETER SYSTEM GSP-1 Main System Overview The colour and
More information