LM45 MULTI-DRIVE TM. Miniature Mini LINEAR L IGHT IP 65 PRODUCT HIGHLIGHTS. RoHS YEAR. smartvisionlights.com. Compliant CE. Warranty.

Transcription

1 LM45 MULTI-DRIVE TM Miniature Mini LINEAR L IGHT P R O D U C T D A T A S H E E T High Intensity LEDs Cable Length: 15.2 cm (6 ) 5-Pin M12 Connector (Male) Aluminum Housing T-slot for Mounting Warranty 10 YEAR Compliant IEC Compliant CE RoHS Rated IP 65 Connector 5-PIN M12 PRODUCT HIGHLIGHTS Delivering up to 42,000 LUX in OverDrive TM mode with standard lenses Built-in Multi-Drive TM allows the light to work in continuous operation or OverDrive TM mode PNP and NPN strobe input Over-current protection 5-pin M12 quick connect Rev

2 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN MM DRAWN TOLERANCES: FRACTIONAL CHECKED ANGULAR: MACH BEND ENG APPR. TWO PLACE DECIMAL THREE PLACE DECIMAL MFG APPR. INTERPRET GEOMETRIC Q.A. PROPRIETARY AND CONFIDENTIAL TOLERANCING PER: COMMENTS: THE INFORMATION CONTAINED IN THIS MATERIAL DRAWING IS THE SOLE PROPERTY OF SmartVisionLights. ANY FINISH REPRODUCTION IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF NAME DATE PRODUCT DESCRIPTION The LM45 compact linear light features an integrated Multi-Drive TM constant current driver that operates continuously or in OverDrive TM strobe mode depending on wiring method. The light can be mounted via a rear T-slot channel, also offers overcurrent protection and PNP and NPN strobe input. PRODUCT SPECIFICATION CONTINUOUS OPERATION OVERDRIVE TM OPERATION Electrical Input 24 V DC +/- 5% Input Current Max. 140 ma Max A Wattage Max W Max W PNP Line 4 4 V DC V DC 20 V DC NPN Line 15 Common (0 V DC) Connect pin 5 to GND (see Wiring Configuration for more information) Strobe Duration Min. 10 µs Max. 50 ms Duty Cycle Max. 10% Strobe Input PNP > +4 V DC or greater to activate NPN > GND (<1 V DC) to activate NPN can be tied to ground OR PNP can be tied to 24VDC (not both) On/Off Input PNP > +4 V DC or greater to activate NPN > GND (<1 V DC) to activate Connection 5-pin M12 connector Ambient Temperature -18º 40º C (0º 104º F) IP Rating IP65 Weight 54g Compliances CE, RoHS, IEC PRODUCT DRAWING active area SCALE 1: active area 36 MALE 5 PIN M12 PIGTAIL APPROX. 6 INCHES A T-Slot DETAIL A SCALE 4 : NC MP MP MP UNITS ARE IN MILLIMETERS 5/26/2017 5/26/2017 TITLE: 5/26/2017 5/26/2017 CAD files available on our website. SmartVisionLights.com Dimensions are in mm. DWG. NO. REV LM-45 2 SIZE B RESOURCE CORNER Additional resources are available on our website, including CAD files, videos, and application examples. Smart Vision Lights 2359 Holton Road Muskegon, MI P: F: techsupport@ Open: Monday Friday 8am 5pm ET 2

3 WIRING CONFIGURATION CONTINUOUS OPERATION MODE Pin layout for light (male connector) Pins Function Signal Wire Color 1 Power In +24VDC BROWN 2 NPN Sinking Signal WHITE 3 GND Ground BLUE 4 PNP Sourcing Signal BLACK 5 Intensity Control 1-10 V DC GREY * * Some cables use green/yellow for pin 5 For maximum intensity, it is possible to tie pin 5 to pin 1 at +24 V DC. For continuous mode: PNP (pin 4) can be tied to +24 V DC (pin 1) or NPN (pin 2) can be tied to Ground (pin 3). For the light to function properly, apply either a PNP or NPN signal, not both. Failure to supply light with correct input current will result in non-repeatable lighting (see Product Specifications for requirements) OVERDRIVE TM OPERATION MODE Pins Function Signal Wire Color 1 Power In +24VDC BROWN 2 NPN Sinking Signal WHITE 3 GND Ground BLUE 4 PNP Sourcing Signal BLACK 5 OverDrive TM Signal Ground GREY * * Some cables use green/yellow for pin 5 Failure to supply light with correct input current will result in non-repeatable lighting (see Product Specifications for requirements) Pin layout for light (male connector) STANDARD LENSES Standard lenses project a narrower beam of illumination. They can be used when long working distances are needed. Standard are 40 angle lenses. Best used for working distance between 200 mm and 1000 mm. NARROW 16 (N16) Narrow, 16 angle lenses project a narrower beam of illumination. They can be used when longer distances are needed. Best used for working distance between 300 mm and 2000 mm. LINE (L) WIDE (W) 40 Wide lenses project a large area of illumination. Wide lenses can be used when short working distances are needed. Wide are 80 angle lenses. Best used for working distance between 50 mm and 1000 mm. 80 NARROW 25 (N25) 16 Narrow, 25 angle lenses project a narrower beam of illumination. They can be used when longer distances are needed. Best used for working distance between 300 mm and 2000 mm. 25 Line, 10 and 50 angle cone lenses create a thin narrow beam of illumination. The LM45 Mini Linear Light produces a uniform light pattern. = 500 mm (Grid set to 65 mm x 65 mm) Additional lens options available upon request. 455 mm Standard Wide Narrow (N16) Narrow (N25) Line 3

4 LIGHT PATTERNS Smart Vision Lights recommends the LM45 be used at a working distance between 50 mm to 1000 mm. LIGHTING PATTERN FOR THE LM45 with Standard 40 Lenses 250 mm (9.84 ) 110 mm (~4.3 ) H x 110 mm (~4.3 ) V 500 mm (19.7 ) 220 mm (~8.7 ) H x 220 mm (~8.7 ) V LIGHTING PATTERN FOR THE LM45 with Wide 80 Lenses (W) 250 mm (9.84 ) 220 mm (~8.7 ) H x 220 mm (~8.7 ) V 500 mm (19.7 ) 440 mm (~17.3 ) H x 440 mm (~17.3 ) V Distance = 250 mm 4200 Distance = 250 mm 1500 Distance = 250 mm 42,000 Distance = 250 mm 15,000 LIGHTING PATTERN FOR THE LM45 with Narrow 16 Lenses (N16) 500 mm (19.7 ) 75 mm (~3.0 ) H x 75 mm (~3.0 ) V 1000 mm (39.4 ) 150 mm (~6.0 ) H x 150 mm (~6.0 ) V LIGHTING PATTERN FOR THE LM45 with 25 Narrow Lenses (N25) 500 mm (19.7 ) 170 mm (~6.7 ) H x 170 mm (~6.7 ) V 1000 mm (39.4 ) 340 mm (~13.4 ) H x 340 mm (~13.4 ) V Distance = 500 mm 4500 Distance = 500 mm 2700 Distance = 500 mm 45,000 Distance = 500 mm 27,000 LIGHTING PATTERN FOR THE LM45 with Line Lenses 500 mm (19.7 ) 230 mm (~9 ) H x 60 mm (~2.4 ) V Distance = 500 mm mm (39.4 ) 460 mm (~18 ) H x 120 mm (~4.8 ) V Distance = 500 mm 17,500 4

5 MULTI-DRIVE TM Multi-Drive allowing users to operate the light in continuous operation or OverDrive strobe (high-pulse operation) mode. An advantage of Multi-Drive is faster imaging. It also enchances capture/freeze motion imaging on high-speed lines. The Multi-Drive feature allows the user to run the light in continuous operation or OverDrive TM strobe mode at maximum intensity. OverDrive strobe mode is up to ten times the power of continuous operation. DUTY CYCLE (OVERDRIVE TM MODE ONLY) This section applies only if light is in OverDrive Mode. The Duty Cycle (D) is related to the Strobe Time (ST) and Rest Time (RT). Calculating Rest Time RT = ST D - ST RT = Rest Time ST = Strobe Time D = Duty Cycle ILLUMINATION LM45 Series of Miniature Mini Linear Lights works best for: Example Maximum Duty Cycle for OverDrive TM light is 10% (0.1) RT = 10 ms - 10 ms = 90 ms.1 Rest Time is 90 ms for 10 ms Strobe Time Dark Field Bright Field EYE SAFETY According to IEC 62471: Full documentation available upon request. Notice Exempt Group: No photobiological hazard to eyes or skin even for continuous, unrestricted use. Applicable for wavelengths: 625, and 850. Caution Risk Group 1: Possibly hazardous optical radiation emitted from this product. Do not stare at operating lamp. May be harmful to eyes. Safe for most applications except prolonged exposure. Applicable for wavelengths: 470, 530, and WHI. 5

6 PART NUMBER LM45 COLOR: WHI 470 LENS: Leave blank for Standard (40 ) Part Number Examples: LM (LM45, 625 Red Wavelength) LM45-WHI-W (LM45, White Wavelength, Wide Lenses) LM N16 (LM45, 470 Blue Wavelength, Narrow 16 Lenses) W = Wide (80 ) N16 = Narrow (16 ) N25 = Narrow (25 ) L = Line lens MOUNTING Mounting options include T-slot on bottom of light. Hardware includes: (2) M4 x 16 screws (2) M4 nylon nuts Optional Mounting Bracket The optional BKT0025 can be used to mount the LM45. Easily connect together multiple LM45 using the BKT0025 bracket. The unique design of the BKT0025 bracket allows for any combination of lights to be easily connected together. Use screws and nuts to attach LM45 to mount One M3 x 5 mm screw connects the mounts 6

7 ACCESSORIES Power Cables Splitter Jumper Cables (Used with Splitter) Power Adapters * Description Part Number Lengths Part Number 5 m 5PM m 5PM m 5PM m HF5PM12-10 (High Flex) Description Part Number 5-pin 2 way splitter 5PM12-2SW Mounting Bracket Lengths Part Number 300 mm 5PM12-J mm 5PM12-J mm 5PM12-J2000 AC, 24 Volt, 1.7 Amp T1 Power Supply * European Versions Available (Add -EURO to end of T1 or T2. Example T1-EURO Power Supply ) T1 Power Supply is only recommended when using light in continuous operation. Description LM45 Mount Part Number BKT0025 This glossary covers all Smart Vision Lights product families; some content in this section may not apply to this specific light. TERMINOLOGY GLOSSARY OverDrive Lights include an integrated high-pulse driver for complete LED light control. OverDrive light part numbers start with OD. Continuous Operation Lights stays on continuously. Multi-Drive TM Combines continuous operation and OverDrive strobe (high-pulse operation) mode into one easy-to-use light. Built-in Driver The built-in driver allows full function without the need of an external controller. Camera to Light Connecting the light directly to the camera, without the need for additional controllers or equipment. Polarizers Filters that reduce reflections on specular surfaces. Diffusers Used to widen the angle of light emission, reduce reflections and increase uniformity. TYPES OF ILLUMINATIONS COLOR/WAVELENGTHS LEGEND Wavelengths options range from 365 nm to 1550 nm. * Additional wavelengths available for many light families. Projector Dark Field Radial WHI *See Part Number section for this light s available standard wavelengths. Bright Field Direct Axial Short Wave Infrared LEDs are available in 1050 nm, 1200 nm, 1300 nm, 1450 nm, and 1550 nm. Line Diffuse Panel Backlight 7