Ruth Cheryl Jack Scott Bobby THROW US A BONE

Transcription

1 Ruth Cheryl Jack Scott Bobby THROW US A BONE 2010 Sign Supply Catalog

2 TERMS Companies who have established an open account with One Source, will be invoiced Net 30 days from date of invoice. We also take major credit cards. We can ship COD and your company check is accepted. (No personnel checks please.) OPEN ACCOUNTS To establish an open account with One Source, a credit application with references must be completed. We have the form and can either mail or fax it to you. (You must be in business for over 2-years to apply.) PRICING All prices are subject to change without notice. s prevailing at the time of shipment will apply. We are not bound to typographical errors in this catalog. SALES TAX Qualified sales that are not supported by proper tax exemption certificates will be charged sales tax. The burden of proof that taxes are not to be collected is on the purchaser. ORDERING To place an order, call One Source, and express that you want to place an order: order by our catalog code and description to insure accuracy. Policies regarding various shipping methods are as follows: WALK-IN ORDERS Walk-in orders are welcome at One Source, but please realize that it will take time to process your order. If possible, please try to give us advance notice. WILL CALLS Please allow at least 1-2 hours to process and pull will call orders. FAX ORDERS Fax orders are not only welcome but encouraged. The same guidelines that are set up for other orders will be enforced for fax orders, (i.e., delivery times, UPS shipments, etc.). If any questions should arise regarding a fax order that you have sent, a customer service rep will contact you. TRUCK DELIVERY Minimum orders by One Source Truck in our normal delivery area is $ Orders from $50.00 to $99.00 will be charged a $7.00 delivery fee. Orders from $ to $ will be a $3.00 delivery fee. Orders over $ are shipped free. UPS SHIPMENTS Free freight on most items. +$75.00 will be free freight. A $2.50 packaging charge will be added to each package. Some items are + freight. UPS orders placed before 3:00 p.m. E.S.T., will be shipped the same day. Any orders placed after that time will be shipped the next day, naturally, if the products are in stock. One Source responsibility ends once your order is in the hands of the carrier. Please check the condition of your packages before you accept them and notify the carrier immediately of any damage. C.O.D. charge is $9.50 per package. MSDS SHEETS Available upon request. RETURNED CHECKS There will be a service charge of $30.00 on all returned checks. RETURNS NO returned items will be accepted without a Return Authorization Number (RA#). Returns may be subject to a 20% restocking charge. All special orders are non-returnable. We cannot accept returned product under any circumstances 30 days after shipment. One Source Mailing & Shipping address: 4420 Elms Rd. Swartz Creek, MI website: onesourcemichigan@yahoo.com EMERGENCIES NUMBERS Jack Gould: Scott Waters:

3 1 Intermediate & Cast Vinyl Oracal 341 Intermediate Cal Film...2 Oracal 651 Intermediate Cal Film...2 Oracal 751 Cast Film...2 Oracal 951 Premium Cast Film...2 3M 7125 Cast Film...2 Avery 900 Cast Film...2 Specialty Vinyl Oracal 351 & 352 Polyester Film...3 Oracal 383 Cast Ultraleaf Gold & Silver...3 Oracal 631 Matte Removable Adhesive...3 Oracal 951M Metallic Cast Film...3 FDC 2100/2200 Cast Film...3 FDC 3700 Ultra Metallics Cast...4 Oracal 6510 & 7510 Fluorescent...4 One Source / Fluorescent...4 Oracal 8510 & 8810 Etched & Frosted Glass...4 R-Tape Paint Mask...5 Oracal Paint Mask...5 Plotter Paper...5 SignGold...5 FabTac Adhesive Stencil...5 Oracal 8300 Transparent...6 Oracal 8500 & 8800 Translucent...6 FDC 2500/2550 Translucent...6 3M 3630 Translucent...6 Oracal 5600/5700/5800 Reflective...7 3M 680/5100R Reflective...7 FDC 2407/2457 Reflective...7 Oracal FDC M...11 Oracal Laminating Film Oracal Oraguard FDC Laminating Film M Laminating Flim...13 Application & Cutting Tools Application & Cutting Tools Avery RIGHT-ON Application Fluid...15 Plotter Blades...26 Splash Application Fluid...15 Squeegees...15 Application Tape & Dispensers One Source Brand...16 R-Tape...16 Weber Made...17 The Rotator...17 Banners Material & Banner Tape Bandanna Banner...18 FDC...18 GMI...18 Banner Tape...18 Sign Blanks & Panels Corrugated Plastic Blanks & Sheets...19 PVC Board...19 Poly-Board (H2o Board)...19 Scooter Board...20 Corr-Panel...20 Wood-Corr Panel...20 Poly-Metal Panel...20 Edge Cap...20 Magnum Magnetic...20 Magnum Magnetic / DigiMag...20 Aluminum Sign Blanks & Sheets...21 Sign Frames & Tools Bull Steel Frames & Accessories Corrugated Sign Stakes...24 Poly-Board U Wires...24 Signicade...25 Grommet Machines & Grommets...25 Corner Rounder...25 Vinyl Wall & Floor Rack...25 Miscellaneous Changeable Letters...32 Daige Cold Laminators...29 Roland Cutters...30 Thermo Transfer Film (Cad-Cut)...31 Inks & Bulk Ink Systems Vector Art Software...27 This catalog does not show all products If you do not see something you need Call: Toll Free:

4 2 Oracal 341 High Gloss Intermediate Film 3 mil - 3-year Our most economical opaque marking film, ORACAL 341 is a soft PVC 3 mil, 3-year film with a gloss surface. A great choice for banners, yard signs and other shorter-term applications. Available in 21 high-demand colors and transparent. B/W/C Color Metallic 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd x 50yd Oracal 651 High Gloss Intermediate Film 2.5 mil - 6 year (#1 Seller in the U.S.) Thanks to its proprietary formulation and construction, ORACAL 651 has become the industry standard for high performance calendered films. Only 2.5 mils thick, ORACAL 651 offers six year outdoor durability, flexibility, thermal print compatibility, and a choice of 59 high-gloss colors. This high-quality film is a good choice for moderately complex jobs that don't require the extra conformability provided by our cast films. B/W/C Color Metallic 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd Oracal 751 High Performance Cast Film 2 mil - 8-year This value-priced 8-year cast film offers impressive cutting and weeding properties as well as minimal shrinkage for durable, dimensionally stable applications such as architectural signage, vehicle and fleet graphics. Thermal print compatible. Available in 79 high gloss colors. B/W/C Color Metallic 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd Oracal 951 Premium Cast Film 2 mil - up to 12 year Our highest performing, premium cast vinyl film has been specially designed to produce permanent graphics for use in nearly any commercial or industrial situation, including highly conformable vehicle graphics. ORACAL 951 offers easy cutting and weeding properties as well as minimal shrinkage for permanent, durable, dimensionally stable graphics that can withstand severe weather and handling conditions. Thermal print compatible. 97 ultra-glossy colors. B/W/C Color 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Also available in 48 ) 3M 7125 High Performance Cast Film 2 mil - 7 year - solvent adhesive - 60 colors Use this 2 mil, durable film for permanent, pre-spaced, electronically-cut graphics produced by screen printing or thermal transfer printing. It has clear, pressure-sensitive adhesive and is available in more than 60 colors. Applications include emblems, vehicles, labels, signs, windows and more. B/W/C Color 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd Avery 900 Series (Formerly A9) Cast Film 2 mil - up to 9 years Avery UC-900 series cast films are premium quality, flexible, opaque solid color high gloss vinyl films designed for use in a wide range of outdoor advertising, fleet marking, of outdoor uses where excellent durability, conformability, color, and gloss are required. B/W/C Color 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other Avery producs available call for prices.)

5 3 FDC 2100/2200 Cast Premium Film 2 mil - 9 year - for punched use 2200 FDC series 2100 Premium High Performance Vinyl Film This vinyl also has superior cutting and weeding properties and outstanding outdoor durability. Perfect for permanent graphics, striping, marine applications, vehicle graphics and awnings. To order punched material, use part number (Other sizes available call for prices.) Oracal 351 Gloss & Matte Chrome /Polyester 1 mil - 2-year This thin (1 mil) polyester film is ideal for the decoration of transparent substrates, applications including decorative labels, name and technical plates, decoration and moldings, safety stickers, as well as cut letters and symbols. 2-year outdoor durability. Gloss Matte 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd Oracal 351 & 352 Gloss Gold /Polyester 1 mil - 1-year This thin (1 mil) polyester film surface is optimized for screen and thermal print applications. Applications include decorative labels, name and technical plates, decorations and moldings.. B/W/C Color Metallic 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other sizes available call for prices.) 351 Gold 2-side 352 Gold 1-sided 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd Other sizes available call for prices. CALL US FOR COLOR CHARTS Oracal 383 Cast Ultraleaf Gold & Silver 3.5 mil - 5-year This durable, 3.5 mil, 5-year cast film is a cost-effective alternative to 24-carat gold or silver leaf film. ORACAL 383 features a smooth, printable surface and a three-dimensional visual texture. The durable dimensional stability of this film makes it ideal for lettering, marking and decoration of vehicles, windows and signs requiring longer-term outdoor durability. Silver Ultraleaf Gold Ultraleaf 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other sizes available call for prices.) Oracal 631 Matte Removable Adhesive 3 mil - 3-year - 62 colors This 3-year film removes cleanly and easily for up to 2 years after application and has a matte surface that suppresses unwanted reflection. It's an ideal choice for temporary and short-term indoor graphics--especially in trade shows, displays and exhibitions. Available in 62 colors. (Great for wall graphics.) B/W/C Color Metallic 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd Oracal 951M Premium Cast Metallic Film 2 mil - 7-year Developed to create eye-catching lettering, marking and decorative elements that meet the most extreme performance requirements. With its superior conformability over rivets and corrugations and unsurpassed dimensional stability, this film is ideal for premium vehicle restyling and fleet advertising applications. Available in 20 high-impact colors. (additional colors available by special order). 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd

6 4 FDC 3700 Ultra Metallics Cast 3 mil - 5 year FDC series 3700 Premium Ultra Metallic Vinyl Film This ultra metallic cast vinyl film has an excellent surface gloss and color depth. It provides dynamic graphic accents and can be used for RV and marine applications, automotive aftermarket graphics and striping. To order punched material, use part number x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd Oracal 6510 Fluorescent 4 mil / 1-year Produce eye-catching graphics with this 1-year* high gloss fluorescent cast film that features high visibility in normal and low light conditions. ORACAL 6510 is ideal for short-term outdoor applications that require special high-impact visibility. 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd Oracal 7510 Fluorescent 6 mil / 2-year With the longest outdoor durability rating in the industry (2 years), this premium cast, high gloss fluorescent film is ideal for graphics requiring special, high-impact visibility. ORACAL 7510 is a cast film with excellent cutting, weeding, application and conformability characteristics. Especially effective in twilight and poor visibility conditions, it's ideal for vehicle and bus advertising, point-of-purchase displays, labels, decals and other retail applications. 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other sizes available call for prices.) One Source / Fluorescent 4-year With the longest outdoor durability rating in the industry (4 years), high gloss fluorescent film is ideal for graphics requiring special, high-impact visibility. This fluorescent has excellent cutting, weeding, application and conformability characteristics. Especially effective in twilight and poor visibility conditions, it's ideal for vehicle and bus advertising, point-of-purchase displays, labels, decals and other retail applications. (un-punched only) 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd Oracal 8510 Etched & Frosted Glass Film 3 mil - 7-year Create a frosted, cut or sandblasted glass finish. ORACAL 8510 offers impressive cutting and weeding properties as well as minimal shrinkage for permanent, durable applications that will last. Its medium-gloss surface inhibits undesired reflection, making it ideal for the decorative design of shop windows. 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Also available in 48 ) Oracal 8810 Frosted Glass 3 mil - 7-year Create a sparkling glass effect or the impression of etched, cut or sandblasted glass with ORACAL Series 8810 Frosted Glass Film. Available in five shimmering colors; silver grey, gold, mint, light blue and soft pink. This long-lasting film is an excellent choice for the decorative design of shop windows, glass doors and glass-like surfaces. 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Also available in 48 )

7 5 R Tape Paint Mask ProGrade vinyl paint mask is a specially designed, removable film used in making computer cut stencils for painted graphics. It works with either sign enamels or automotive paints and features a user-friendly adhesive which is easy to transfer from the release liner, easy to apply and easy to remove. It has become extremely popular because it removes without leaving any adhesive residue or other surface contamination. Available in either white or yellow, it is easy to cut and weed and works in bake cycles up to 200 F. Available in 15 punched and un-punched, 24,30 un-punched, 48,54, x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd Oracal Paint Mask (Other sizes available call for prices.) ORAMASK 810 Grey Good for conformable applications such as complex curves, uneven or semi-flexible substrates and surfaces. The transparent grey film guarantees the visibility of the background. Low-tack water based adhesive. ORAMASK 811 White Rigid white PVC film designed for use on smooth, flat substrates and surfaces. Low-tac water based adhesive. ORAMASK 813 Blue This transparent blue masking film guarantees the visibility of the background making it the best choice for multi-color requirements or when working with fine details. Polyacrylate with low-tack adhesive. 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other sizes available call for prices.) Plotter Layout Paper Plotter Layout Paper Perfect for making patterns or layouts on many signage and banner jobs. This is a 50# paper and is available perforated or un-perforated for use on computer sign machines.. 15 x 150yd x 150yd x 150yd SignGold SignGold is the sign industry s only exterior use authentic 22 karat gold film. Made for outdoor use, and is warranted for years Non-Thermal films 1 mil thickness Thermal films 2 mil thickness SignGold cannot be applied to latex paints. 15 x 2yd Florentine Swirl x 2yd Small Engine Turn 1/ x 2yd Satin Surface x 2yd Large Engine Turn 7/ x 2yd XL Engine Turn 1-3/ x 2yd Burnished Glass (RC) x 2yd Florentine Swirl x 2yd Small Engine Turn 1/ x 2yd Satin Surface x 2yd Large Engine Turn 7/ x 2yd XL Engine Turn 1-3/ x 2yd x 5yd (For prices on other SignGold products call.) FabTac Adhesive Stencil What is Fabtac? Fabtac is an adhesive stencil roll used to paint graphics on fabric or canvas, such as (Sunbrella / Diklon Acrylic Fabrics). Acrylic fabric is the canvas commonly used in the Awning and Sign Industries. Fabtac is a stenciling film with a high tack gummy adhesive that adheres to the weave of the fabric and is easily removed. The width and length of the stencil is available in two sizes to accommodate your specific needs. Fabtac is frictionfed plotter friendly and can be used with common pre-mask transfer tapes. Fabtac is a natural white material and comes on a golden brown easy release liner for easy weeding. Recommended by GLEN RAVEN MILLS Inc., makers of Sunbrella Acrylic Fabric. Benefits: * No heat needed to apply * No spray adhesive needed * Easy transfer-tape removal * Anyone can do it * Inexpensive & profitable * No adhesive residue clean up * Perfectly sharp, raised graphics * Fast & Easy to follow instructions * Reliable / Guaranteed Satisfaction 18 x 30yd x 30yd

8 6 Oracal 8300 Transparent Film 3 mil - 5 year Perfect for creating stunning stained glass effects and color overlays. ORACAL Series 8300 offers impressive cutting and weeding properties as well as minimal shrinkage for permanent, durable, internally illuminated signs and window graphics. ORACAL 8300 is thermal print compatible and suitable for both wet and dry application. Available in 30 vibrant colors. 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Also available in 48 ) Oracal 8500 Translucent High Performance Calendered PVC 3 mil - 7-year This high performance calendered film features the lowest shrinkage of any translucent film. ORACAL 8500 has been especially designed for producing high-quality signs, backlit acrylic and glass surfaces and translucent banners. Available in 55 satin-finish colors (custom colors also available). 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Also available in 48 ) Oracal 8800 Translucent High Performance Cast 2 mil - 10-year ORACAL Series 8800 Premium Cast Translucent Film meets the demands of corporate signage programs with a wide range of colors, a synthetic liner, 8-year durability and unbeatable color consistency from roll-to-roll. The silk-matte finish is perfect for reducing reflection and the workability will change the way you think about translucent film. Designed for producing high quality illuminated signs on rigid, thermoformed or flexible surfaces. Colors Black 48 x 50yd x 50yd N/A (60 by special order only) Color Charts Available for all Vinyls FDC 2500/2550 Premium Cast Translucent 2 mil - 7-years FDC series 2500 Premium Translucent Vinyl Film This high performance cast translucent film is engineered with excellent weathering and aging characteristics. This film is used when backlit properties are needed. Excellent even color illumination and flexibility for sign faces and awnings. This film can also be used on glass, acrylic and polycarbonate sign faces or window substrates. To order punched material, use part number x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other sizes available) 3M 3630 Premium Cast Translucent 2 mil - up to 9-years Use this 2 mil film to produce permanent, interior or exterior graphics for internally-illuminated sign faces and awnings. It has clear, pressure-sensitive adhesive and a synthetic liner that resists water. It is available in more than 50 colors, many with simulated PANTONE references. 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other sizes available) Avery, 3M & FDC Color Charts Available Call:

9 7 3M 5100R Reflective Engineer Grade Reflective 7 mil / 7-year Engineer Grade 3M Scotchlite Reflective Graphic Film 5100R This 7-mil flexible, enclosed lens, engineer grade, retroreflective film has excellent angularity, up to 7 years durability, is designed for superior cutting and weeding, and removes with heat. Available in 15 colors, use it for cut letters, decals, vehicle marking and graphics, non-regulated signage. Certain ASTM and NFPA standards apply. For screen, electrostatic, thermal mass transfer printing. 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other sizes available call for prices.) Oracal Oralite 5600 Reflective 5 mil - 7-year This flexible, printable reflective film is the perfect choice for emergency vehicle graphics and other applications where a durable, conformable and removable* reflective film is required. inkjet and thermal-print compatible, this innovative reflective film provides endless creative options. Available in 14 high-visibility colors. White Black/Colors 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other sizes available call for prices.) Oracal Oralite 5800 High Intensity Grade Reflective 10 mil / 10-year This high intensity grade reflective film is designed for the production of long-termtraffic control, guidance, warning and information signs. Meets ASTM D 4956 specifications for Type III retroreflective sheeting. Available in 7 popular, high visibility colors All Colors 24 x 50yd x 50yd x 50yd Color Charts Available for all Vinyl Oracal Oralite 5700 Engineering Grade 6 mil / 7-year This durable 7-year engineering-grade reflective film meets ASTM D 4956 specifications, and provides outstanding resistance to the weather, chemicals and corrosion. For long-lasting traffic control, guidance, warning and information signs. Available in 13 high-visibility colors. White & Colors Black 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd FDC 2407/ 2457 Reflective Premium Flexible Reflective/White 5.9 mil / 7-year Engineer Grade FDC series 2407 Premium Flexible Engineering Grade Reflective Film This glass beaded retro-reflective vinyl film renders excellent reflectivity at night. This product is for fleet and vehicle markings where riveted and corrugated surfaces may be required. This film is highly resistant to the extremes of hot, cold, dry and humid weathering conditions. To order punched material, use part number White 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other sizes available call for prices.) 3M 680 Reflective Premium Flexible Reflective 7 mil / up to 9-year Engineer Grade This permanent 7-mil, flexible, enclosed lens, retroreflective film has slideable, pressure-activated adhesive, excellent angularity and up to 9 years durability. Available in 11 colors, use it for commercial vehicle, railroad and bus graphics, sign graphics, and striping. Certain ASTM and NFPA standards apply. 15 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd (Other sizes available call for prices.)

10 8 Oracal Orajet mil - 3-year You can walk all over this inkjet media! ORAJET 1663 is a sturdy 4.25 mil, 3-year film specially developed for traffic-resistant floor graphic applications. It features a clear removable adhesive, making it easy to change out graphics when needed. When combined with our matching laminating films (ORAGUARD 250AS Anti-skid or ORAGUARD 255AS Anti-skid High Load), this warranted and insured film stands up to repeated foot traffic while providing the safety and peace of mind your customers demand. 30 x 50yd x 50yd x 50yd x 50yd Oracal Orajet mil - 2-year (Other sizes available) A 4 Mil PVC film featuring a high level of pigmentation for enhanced covering power, as well as specially formulated grey-pigmented adhesive that enables the graphic to be removed without adhesive transfer after application (provided application guidelines are followed). The product is available in a white gloss finish. 31 x 50yd x 50yd x 50yd Oracal Orajet 3161 DT 4 mil - 2-year Orajet 3161DT is a special low-temperature 4 mil calendered film with a clear solvent-based adhesive. Designed to allow easier cold climate general signage installations in temperature as low 23 F. 54 x 25yd Oracal Orajet mil - 4-year This economical 4.0 mil, 4-year inkjet media is a great choice for vibrant shorter-term applications. ORAJET 3164 has a clear, waterbased permanent adhesive, and is ideal for a variety of outdoor signage and banner applications, including short-term promotions, P.O.P. and exhibition graphics. Available in widths up to 80-inches. 30 x 50yd x 50yd x 50yd x 50yd Oracal Orajet mil - 5-year This versatile 3.75 mil, 5-year film is perfect for short to mediumterm applications. Featuring a grey, solvent-based permanent adhesive for covering power and durability, ORAJET 3165 can be used for a variety of outdoor signage and banners, including short-term promotions, P.O.P. and exhibition graphics. 54 x 50yd x 50yd Oracal Orajet 3165RA 3.75 mil - 5-year Ideal for general signage applications over flat surfaces including yard signs, banners, and displays. In addition to its advanced airrelease liner system, this 5-year, 3.75 mil film features a glossy surface to produce vivid, life-like prints and a grey-pigmented solventbased adhesive for improved durability and covering power. 30 x 50yd x 50yd x 50yd Oracal Orajet mil - 5-year An economical 6 mil calendered PVC film featuring a special lowtack adhesive that enables the graphic to be moved and re-applied many times after intial application provided printing and application guidelines are adhered to. Ideal for contour cut wall graphics utilized in interior applications. Available in a white matte only. 30 x 50yd x 50yd x 50yd Oracal Orajet mil - 4-year This economical 3 mil, 4-year transparent film is typically used for window signage and other shorter-term promotional applications. Features a clear water-based removable adhesive. Suitable for indoor or outdoor flat-surface applications where you want the printed image to "float". Available in transparent gloss and matte finishes. 30 x 50yd x 50yd x 50yd x 50yd x 50yd

11 9 Oracal Orajet mil - 4-year This economical 3 mil, 4-year calendered inkjet media is the right choice for short-term interior and exterior graphics that require easy removal. ORAJET 3621 has a water-based, removable, grey-pigmented adhesive that delivers great covering power. Designed for flat-surface applications, ORAJET 3621 is available in widths up to 80-inches. White gloss and matte finishes. 30 x 50yd x 50yd x 50yd Oracal Orajet mil - 3-year This economical removable media provides vivid images and great colors at a highly competitive price. Great for shorter-term interior wall and glass graphics, including murals, ORAJET Series 3628 features a special low-tack adhesive that enables the graphic to be removed easily after initial application. Compatible with today s popular eco-solvent, solvent, UV curable and grand format inkjet printers. 30 x 50yd x 50yd x 50yd Oracal Orajet mil - 4-year One of our most economical and popular inkjet films, 3 mil, 4-year ORAJET 3640 provides vivid images and great colors for short to medium-term indoor and outdoor applications. ORAJET 3640 features a clear, permanent adhesive and is typically used for a variety of outdoor signage and banner applications, including short-term promotions, P.O.P. and exhibitions. 30 x 50yd x 50yd x 50yd Oracal Orajet mil - 4-year This economical water-based digital media provides vivid images and great colors at a highly competitive price. Great for promotional signs, banners and other short to medium term applications, ORA- JET 3641 is available in widths up to 60-inches, and is compatible with today s popular eco-solvent, solvent, UV curable and grand format inkjet printers. 30 x 50yd x 50yd x 50yd Oracal Orajet mil - 5-year Our top-selling inkjet media, this customer favorite is setting the industry standard for an economical, yet durable inkjet film. Appropriate for a broad range of indoor and outdoor applications, ORAJET 3651 can be used on flat surfaces, simple curves and simple contours. It features a grey-pigmented, permanent adhesive (Transparent finish has clear adhesive) and can be used with an extensive array of popular inkjet printers. Prints great! 30 x 50yd x 50yd x 50yd x 50yd Oracal Orajet 3675/ mil - 3-year /50 & /40 Our newest perforated window film features 5.5 mil thickness, a transparent adhesive and a black backing layer. Well suited for architectural window graphics and other applications that require more surface area to create vivid prints. Also features an industryleading outdoor lifespan of 3 years for window applications that stand the test of time. Available in white gloss finish. 24 x 10yd x 10yd x 10yd Oracal Orajet mil - 5-year Check this 2.75 mil, 5-year film out when you need a removable inkjet media for medium-term indoor or outdoor projects. ORAJET 3691's a grey-pigmented, removable adhesive makes removal a snap, while providing great covering power over existing graphics. (Not recommended for vehicle wraps). Available in white gloss, semi-gloss and matte finishes. 54 x 50yd x 50yd FOR COLOR CHARTS CALL ONE SOURCE CUSTOMER SERVICE

12 10 Oracal Orajet mil - 7-year This high-performance 2.75 mil, 7-year solvent-based inkjet media features a brilliant gloss-white surface that produces vivid, colorful prints. Its solvent-based, grey-pigmented, repositionable adhesive and conformability makes it a great choice for vehicle graphics, including wraps of vehicles with simple to medium-complexity curved surfaces. Removable with little or no adhesive residue for up to four years. Available in a white gloss finish and transparent. 30 x 50yd x 50yd x 50yd x 50yd Oracal Orajet 3551RA 2.75 mil - 7-year Ideal for general signage and vehicle wraps over simple to moderate curves, rivets and corrugations, conformable Series 3551RA features an advanced air-release liner and a solvent-based, greypigmented repositionable adhesive to make smooth application a breeze. Plus this 7-year, 2.75-mil film features a smooth, bright, ultra-glossy surface to produce vivid, life-like prints that can be removed with little or no adhesive residue for up to four years. 30 x 50yd x 50yd x 50yd Oracal Orajet mil - 7-year This high-performance, 3 mil, 7-year translucent inkjet media is excellent for producing brilliant backlit signage, both indoors and out. ORAJET 3850 features a semi-gloss finish for reduced glare, and a clear, permanent adhesive for internally illuminated applications that last. 30 x 50yd x 50yd x 50yd Oracal Orajet mil - 7-year ORAJET Series 3880 CeeLite -Certified Inkjet Media, is a 3 mil, cast PVC inkjet film specifically designed to produce true-color digitally printed images for backlit signage and other graphic applications involving CeeLite LEC lighting technology. This film features a clear, repositionable solvent adhesive. 30 x 50yd Oracal Orajet mil - 10-year High performance ORAJET Series 3951 Professional Wrapping Film has been specially developed for fleet and vehicle wraps that require the highest degree of durability, conformability and performance. Engineered to be highly conformable, repositionable and removable with little or no adhesive residue for up to four years after installation, 2 mil, 10-year series 3951 features a smooth, ultraglossy surface to produce vivid, life-like prints. ORAJET 3951 features a solvent-based, grey-pigmented* repositionable adhesive, and an ultra-smooth surface that prints like a dream. 30 x 50yd x 50yd x 50yd x 50yd Oracal Orajet 3951RA 2 mil - 10-year An ideal choice for quicker and easier vehicle wraps, ORAJET Series 3951 Professional Wrapping Film with Rapid Air features an advanced air release system, a grey-pigmented solvent-based repositionable adhesive and cast construction for highly conformable performance over the most difficult curves, corrugations and rivets. ORAJET 3951RA features an ultra-glossy surface to produce vivid, life-like prints that can be removed with no adhesive residue for up to four years. 30 x 50yd x 50yd x 50yd FDC Print Media Gloss & Semi-Matte FDC Series 7420 is a top coated paper designed for printing general purpose posters, exhibits and displays. (non adhesive back) Gloss Semi-Matte 30 x 100ft 6.5mil N/A x 165ft 8.7mil N/A 54 x 100ft 6.5mil N/A x 165ft 8.7mil N/A 60 x 100ft 6.5mil N/A x 165ft 8.7mil N/A Avery Media Available For s Call Customer Service

13 11 3M IJ160C-10 4 mil 3M Controltac Graphic Film with Comply Adhesive Use this 4 mil, white film to piezo ink jet print interior or exterior graphics for long-term use. Applications include emblems, striping, labels, vending machines, commercial vehicle markings and more. 30 x 50yd x 50yd x 50yd x 50yd M IJ180C-10 2 mil 3M Controltac Graphic Film with Comply Adhesive Use this 2 mil, opaque film to produce high quality, long-term graphics with selected piezo ink jet printers. The film has pressure-activated adhesive and 3M Comply Adhesive for easier installation of large fleet graphics, signs, emblems and more. 30 x 50yd x 50yd x 50yd x 50yd x 50yd M IJ180CV mil 3M Controltac Graphic Film with Comply v3 Adhesive A versatile 2-mil film with slideable, positionable, pressure-activated adhesive and Comply v3 Adhesive, with an invisible pattern and improved air release and lifting resistance from deep contours. Use this long term, removable, piezo inkjet printable film for signs, fleet graphics and watercraft, even on corrugations and rivets. 30 x 50yd x 50yd x 50yd Other 3M,FDC & Avery Products Available Call for s 3M IJ680CR-10 Reflective 7 mil - 9-year Oracal Oralite 5600 Reflective 5 mil - 7-year This flexible, printable reflective film is the perfect choice for emergency vehicle graphics and other applications where a durable, conformable and removable* reflective film is required. inkjet and thermal-print compatible, this innovative reflective film provides endless creative options. 24 x 10yd x 50yd x 10yd x 50yd FDC 7300 Reflective 5.9 mil - 7-year This removable 7-mil, flexible, enclosed lens, retroreflective film has slideable, pressure-activated adhesive, air release channels, excellent angularity, up to 9 years durability. A white film with a typical coefficient of retroreflection of 100, use it for commercial vehicle, rail and bus graphics, sign graphics and striping. Certain ASTM and NFPA standards apply. For piezo inkjet printing. 24 x 10yd call 24 x 50yd call 30 x 10yd call 30 x 50yd call Other sizes available call for prices. (Other sizes available call for prices.) FDC Series 7300 is a premium grade reflective vinyl film designed for printing permanent graphics, signage and decals requiring longterm durability. This product is an engineer grade film and meets ASTM Type I standards. Conformability: flat surfaces, simple curves, rivets and corrugations. 24 x 10yd x 25yd x 50yd x 10yd x 25yd x 50yd (Other sizes available call for prices.)

14 12 Oracal Oraguard mil Protect your prints and your bottom line. ORAGUARD 200 is a 2-year, 2.5 mil film that offers inexpensive protection for shorterterm promotional graphics, along with one-year of additional UV protection for qualified inks when used in outdoor applications. Recommended for cold lamination. Also suitable for heat transfer and wet processing of electrostatic prints. Available in gloss, semi-gloss or matte finishes. 30 x 50yd x 50yd x 50yd x 50yd Oracal Oraguard mil Looking for a great balance between durability and price? ORAGUARD 210, a 4-year, 2.5 mil laminating film, provides solid protection for digital prints in short to medium-term indoor and outdoor applications. Recommended for cold lamination. Also suitable for heat transfer and wet processing of electrostatic prints. Provides a UV extension factor of 2 years for your outdoor prints. Available in gloss, semi-gloss and matte finishes. 30 x 50yd x 50yd x 50yd x 50yd Oracal Oraguard mil This durable 5-year, 2.75 mil laminating film has been specially manufactured to protect digital prints used in outdoor and backlit signage. ORAGUARD 215 film is recommended for cold lamination. Also suitable for heat transfer and wet processing of electrostatic prints. Provides a UV extension factor of 3 years for your outdoor prints. Available in gloss, semi-gloss and matte finishes. 30 x 50yd x 50yd x 50yd x 50yd OTHER SIZES AVAILABLE CALL ONE SOURCE CUSTOMER SERVICE FOR PRICES Oracal Oraguard mil Defend your hard work from the elements and vandalism! Digital prints protected with ORAGUARD 240 polyvinyl fluoride laminating film can be restored to like-new condition for up to 7 years using naphtha (lighter fluid), removing surface contaminants such as markers and spray paint. 240 is an ultra-thin (1 mil) high gloss film with a UV protection extension factor of 5 years. 30 x 50yd x 50yd x 50yd Oracal Oraguard 250AS 4.75 mil Perfect for protecting indoor floor graphics in normal traffic areas. ORAGUARD 250AS is a 2-year, 4.75 mil PVC film with a raised, non-skid texture and a clear, solvent-based permanent adhesive. When used with matching ORAJET 1663 Floor Graphics media, the result is a warranted, insured application that will provide your customers with safety and peace of mind. Meets ASTM D 2047 specifications. Recommended for cold lamination. 36 x 50yd x 50yd x 50yd Oracal Oraguard 255AS 6.75 mil Ideal for protecting indoor floor graphics exposed to heavy traffic or loads. ORAGUARD 255AS is a 2-year, 6.5 mil PVC film with a raised, non-skid texture and clear, solvent-based adhesive. When used with matching ORAJET 1663 Floor Graphics media, the result is a warranted, insured application that will provide your customers with safety and peace of mind. Meets ASTM D 2047 specifications. Recommended for cold lamination. 36 x 50yd x 50yd x 50yd Oracal Oraguard mil Our most durable and conformable cast PVC laminating film. ORA- GUARD 290 can be used for a wide range of longer-term indoor or outdoor application, including fleet and large graphic applications. ORAGUARD 290 is a 8-year, 2 mil, highly flexible cast film with a clear, solvent-based adhesive. It's available in gloss and matte, and has a UV protection extension factor of 4 years. 30 x 50yd x 50yd x 50yd x 50yd

15 13 Oracal Oraguard 290F 2 mil / 7-year If you're creating signage for windows or other transparent applications, your laminate choice is clear. ORAGUARD 290F is a 2 mil, 8-year optically clear cast film specially designed for use with perforated window graphics films and other applications where the highest levels of clarity and transparency are needed. Available in gloss and matte finishes with a UV protection extension factor of 4 years. 24 x 10yd x 50yd x 10yd x 50yd x 10yd x 50yd x 10yd x 10yd (Other sizes available call for prices.) Oracal Oraguard mil / 7-year For the indoor and outdoor protection of large format digital prints. Because of its extra flexibility ORAGUARD 293 is recommended for vehicle wrapping in combination with ORAJET 3551, ORAJET 3551RA, or ORALITE Not generally recommended for use with ORAJET 3951 or ORAJET 3951RA as this combination may lead to excessive stretching of the printed graphic. 30 x 50yd x 50yd x 50yd x 50yd M mil / 3-year 2-mil film that can enhance gloss and provide additional ultraviolet and durable physical protection for selected digitally-imaged graphic constructions. It is designed for cold roll lamination only. 30 x 50yd x 50yd x 50yd x 50yd Other Avery, 3M & FDC Products Available Call for s 3M mil / 7-year This luster overlaminate is approved for use with selected piezo ink jet printers to provide graphics additional ultraviolet and physical protection. It is designed for cold roll lamination only. 30 x 50yd x 50yd x 50yd x 50yd M mil / 7-year This matte overlaminate is approved for use with selected piezo ink jet printers to provide additional ultraviolet and physical protection to graphics. It is designed for cold roll lamination only. 30 x 50yd x 50yd x 50yd x 50yd FDC 7000 Laminate 2 mil / 7-year This overlaminate is approved for use with selected piezo ink jet printers to provide additional ultraviolet and physical protection to graphics. It is designed for cold roll lamination only. (Matte / Gloss) 30 x 25yd x 50yd x 25yd x 50yd FDC 7010 Laminate 3.2 mil /5-year This overlaminate is approved for use with selected piezo ink jet printers to provide additional ultraviolet and physical protection to graphics. Cold roll lamination only. (Matte /Luster/ Gloss) 30 x 25yd x 50yd x 25yd x 50yd x 25yd x 50yd

16 14 Grifhold knife and pick holder (Part# 44) 4.95 #1 Knife with cap & blade 1.99 Grifhold soft handle knife pk 7-E Blades pk 9-E Blades Olfa Knife # Olfa Silver Knife 9.25 Olfa #300 Larger than other standard duty cutters. Olfa #5004 Sure-grip heavy-duty utility cutter features a ratchet wheel blade lock and an anti-slip rubber grip insert. Uses any OLFA Heavy-Duty Replacement Blades. OLFA AB-10B OLFA Steel Replacement Blades 10pk OLFA AB-50B OLFA Steel Blades, 50/pk OLFA LB-10B OLFA HD Blades 10pk RAZOR BLADES #9 Medium Duty Blades/100pk TWEEZERS Stainless steel needle tip tweezers for weeding vinyl Speedball Hard Rubber Roller 4 Roller / Brayer CoroClaw For Cutting 4mm Corrugated Plastic

17 15 Chizler This is the original pink LiL Chizler vinyl remover. This tool safely and easily lift the edge of vinyl with a simple glide. Oracal Grey Squeegee A stiff plastic squeegee for temporary use with vinyl and Application tapes or to give to your customers. Avery White Squeegee A stiff plastic squeegee for temporary use with vinyl and Application tapes or to give to your customers. 3M PA-1 Gold Squeegee The Gold Applicator from 3M is nylon reinforced to keep its edge and last longer than ordinary squeegees. Oracal Teflon Squeegee This squeegee has a very stiff, clean edge and the Teflon is so smooth it slides across the vinyl, making application a breeze. Oracal Felt Edge Squeegee Nylon reinforced squeegee with black felt edge that will not scratch or mar the surface of digital prints or specialty vinyl. Avery Blue Felt Edge Nylon reinforced squeegee with black felt edge that will not scratch or mar the surface of digital prints or specialty vinyl. Avery Felt Squeegee 100% Felt squeegees for digital prints or specialty vinyl. Will not scratch or mar the print surface. Sealit Pen The SEALIT PEN is fast and easy way to seal the edges of your graphices and protects them from lifting. 3M Tape Primer 94 Use to improve vinyl adhesion where vinyl will be stretched or heated into concave areas. Great for use on most complex vehicle contours. Works with most brands of vinyl each pk pk.69 each pk 3.49 each 4 x 2-3/ each 4 x 2-3/ x 2-3/ ½ pt. SPLASH Formulated to make applying vinyl lettering easier, faster and safer. Splash eliminates air bubbles and wrinkles, provides a clean work surface, and accelerates early adhesion. (Concentrate makes 1-gal.) Avery RIGHT-ON Application Fluid Formulated to make applying vinyl lettering easier, faster and safer. RIGHT-ON eliminates air bubbles and wrinkles, provides a clean work surface, and accelerates early adhesion. Spray Bottle Great for spraying Splash & Right-On application fluid gal 2.74 ea 1.99/6+

18 16 One Source Brand Width 1-Tape high tack 100yd roll per inch 1-Tape clear high tack 100yd roll per inch R-Tape DigiMask R-Tape DigiMask 38 x 100yd x 100yd x 100yd x 100yd (Custom cutting on 48 rolls at no aditional charge.) Width ApliTape 4075 high tack 100yd roll Conform 4075 RLA/high tack 100yd roll Conform 4076 high tack 100yd roll (Custom cutting on 48 rolls at no aditional charge.) AT-60 Clear medium tack 100yd roll AT-42 Clear medium tack 50yd roll per inch

19 17 The Rotator 30" - $ Holds a total of up to 120" of transfer tape. The 4 rods hold a total of 30" of transfer tape EACH! Saves time & material with a simple turn of the wheel. The Rotator has a universal right or left hand mount. Every Rotator comes with (20) 3" core plugs, & an 8" squeegee. Attaches to your table with hook & loop Velcro (Included). 20' Graphics are no longer a problem. The Rotator has space to feed long graphics underneath the spindle to provide you with wrinkle free application. The Rotator is also good for applying laminate to digital printed graphics. Transfer Tape Not Included. Once you get your tape tool clamped or bolted to your table or work bench, you simply pull your application tape out, over and just past the end of your vinyl. You can adjust the tension of your tape coming off the roll with a quick turn of the tensioning knob. Once you get your tape out and over your vinyl, you simply fasten the application tape to your table and squeegee it down back towards the roll of application tape. The tension that you set with the clutch keeps your application tape up and off your vinyl until you squeegee it down. In fact, the WEBERmade Tape Tool works so good and is built so strong, we back it up with a 90 day unconditional, no questions asked, money back guarantee and lifetime warranty. The Rotator 43" - $ Holds a total of up to 172" of transfer tape. The 4 rods hold a total of 43" of transfer tape EACH! Saves time & material with a simple turn of the wheel. The Rotator Has a universal right or left hand mount. Every Rotator comes with (20) 3"core plugs, & an 8" squeegee. Attaches to your table with hook & loop Velcro (Included). 20' graphics are no longer a problem. The Rotator has space to feed long graphics underneath the spindle to provide you with wrinkle free application. The Rotator is also good for applying laminate to digital printed graphics. Transfer tape not included. Single Shaft Double Shaft

20 18 Bandanna Banner 14oz. Thermo-Weld hemmed & grommets every 24. Available in white, black, blue, red, yellow, & green. White Colors 22 x 24yds x 24yds x 24yds per foot per foot per foot GMI 10oz. Classic Super Smooth Super Smooth / 1-side / White This 10oz. Super Smooth 1-side for screen printing or solvent Inkjet printing process. 25yds 50yds GMI 10oz. Regal Scrim Banner Matte White / 1-side 1-side solvent inkjet process. GMI 13oz. Regal Scrim Banner Gloss White / 1-side 1-side for solvent inkjet printing process 25yds 50yds yds 50yds GMI 13oz. Classic Super Smooth Super Smooth / 2-sided / White 25yds 50yds FDC oz. Scrim Banner Gloss & Matte White / 1-side FDC Series 7503 is a PVC banner designed for printing general purpose signage and displays. It is a one side smooth and printable non-top coated media with a high white point that provides great printability. This product feature stear, curl and fire resistance, passing NFPA 701 fire resistant certification test. Oracal 1395 Banner Tape Oracal Orabond 1395 is a double-sided hem tape This premium 13oz. Super Smooth with blockout is printable 2- sides and offers excellent durability. This uncoated media will give your customer amazing prints, with vivid colors and fine detail. Case Qty per roll case/roll per roll 30 x 40 yds x 40 yds x 40 yds x 40 yds x 36 yds /2 x 36 yds One Source HD Banner Tape One Source HD is a heavy duty double-sided banner hem tape. per roll 3/4 x 36 yds x 36 yds 10.95

21 19 Corrugated Plastic Sheets SIZE (w-h) White 4mm 24 x White opaque 4mm 24 x Yellow 4mm 24 x Colors 4mm* 24 x White 4mm 36 x SIZE 1ea White 4mm 48 x White opaque 4mm 48 x Colors 4mm* 48 x White 6mm 48 x White 8mm 48 x White 10mm 48 x *4mm colors: black, red, light blue, dark blue, ivory, orange, grey, brown, green & silver CoroPack 100ea 24 x18 White 4mm corrugated plastic 100ea 10 x 30 Econo Stakes $ CoroClaw For Cutting 4mm Corrugated Plastic $11.95 PVC Board Expanded closed-cell Polyvinyl Chloride (PVC) extruded sheet with a smooth low-gloss finish, PVC sheets are ideal for indoor or outdoor signs and displays. (*3mm colors: yellow, red, royal blue, sky blue, gold, green, orange, grey & beige.) SIZE PVC White 3mm 4 x PVC Black 3mm 4 x PVC Colors 3mm* 4 x PVC White 6mm 4 x PVC Black 6mm 4 x PVCWhite 10mm 4 x Poly-Board (H2O Board) Poly-Board is a 6 ply.024pt waterproof white display board for political and real estate signs, laminated with extruded polyethylene on both sides. Install on U wire x x sht skid 22 x per sht 28 x per sht (Custom cutting also available call for prices) use 20 x 33 wires use 26 x 33 wires

22 20 Corr-Panel Corr Panel has a.015 aluminum surface with baked enamel wax-free finish and corrugated/fluted plastic Color x 8 (good 1-side) 6mm White x 8 (good 2-side) 6mm White x 8 (good 1-side) 6mm Colors x 8 (good 2-side) 6mm Colors x 8 (good 2-side) 10mm White x 10 (good 2-side) 6mm White x 10 (good 2-side) 10mm White (Life expectancy of approximately 10 years.) Wood-Corr Panel Wood-Corr has a.015 aluminum surface with baked enamel finish and a 1/2 wood core. Color x 8 (good 1-side) 1/2 White x 8 (good 2-side) 1/2 White Scooter Board Scooter Board blanks by Woodcraft Mfg. Co. is a twosided exterior moisture resistant high density hardboard with a stain resistant brilliant white enamel finish. Ideal for real estate signs, Scooter Board readily accepts screen printing, digital flatbed printing, or vinyl lettering x 24 3/ x 36 3/ x 24 3/ x 36 3/ x 8 3/ x 8 1/ (Custom cutting available / call for prices.) Poly-Metal Panel Poly-Metal is a prefinished sign panel with polyester paint Color x 8 (good 1-side) 3mm White x 8 (good 2-side) 3mm White (Life expectancy of approximately 10 years.) New Force Magnetics Designed for years of trouble free service with a minimum maintenance. DigiMag works with a variety of solvent printers including Mutoh, HP, Mimaki and Roland. Magnum Magnetic The #1 selling magnetic in the U.S.A. Designed for years of trouble free service with a minimum maintenance. DigiMag Matte White Print full color magnets on your solvent ink jet printer. DigiMag works with a variety of solvent printers including Mutoh, HP, Mimaki and Roland. Edge Cap Plastic Edge Cap is used to protect and accent the perimeter of a sign panel. Available in 8' lengths 1/4" & 1/2" /4 Black /4 White /2 Black /2 White (For UPS shipments: Add $7.50 per package) Roll 12 x mil Matte (12 ppi) x mil Matte (12 ppi) x 25ft 30 mil Matte (12 ppi) x 50ft 30 mil Matte (12 ppi) x Linear ft 30 mil Matte (12 ppi) 4.25 (Custom cutting available / call for prices.) Roll x 25ft 30 mil Matte (12 ppi) x 50ft 30 mil Matte (12 ppi) (Custom cutting available / call for prices.) Roll 12 x mil Matte x mil Matte x 25ft 30 mil Matte x 50ft 30 mil Matte x Linear ft 30 mil Matte 3.99 (Gloss also available / call for prices.)

23 21 Aluminum Sign Blanks & Sheets Corners white/white 6 x 24 square white/white 6 x 36 square white/white 12 x 18 radius white/white 12 x 18 square white/white 12 x 18 radius white/white 12 x 18 square white/white 12 x 18 square white/white 12 x 18 radius white/white 18 x 24 square white/white 18 x 24 radius white/white 18 x 24 square white/white 18 x 24 radius white/white 18 x 24 square white/white 18 x 24 radius white/white 18 x 24 square white/white 18 x 24 radius white/white 24 x 36 square white/white 24 x 36 radius white/white 24 x 36 square white/white 24 x 36 radius white/white 24 x 36 square white/white 24 x 36 radius white/white 24 x 36 square white/white 24 x 36 radius Corners white/white 4 x 8 square black/black 4 x 8 square white/white 4 x 8 square white/white 4 x 10 square call call Prepainted aluminum sheet finishes are uniquely designed in that they offer a hard, abrasive resistant coating, yet allow the flexibility for extensive forming and fabricating. Improved Brake Forming Characteristics Fade And Abrasion Resistant Versus Batch Anodizing

24 22 Folding A Frames S941 C068 C041 S943 S942 C062 Frames constructed of 3/4 angle iron Bolt-In frames punched with oblong holes (1/4 x 1/2 ) located 14-1/2 o.c. Slide-In frames punch with die-cut loops and hold panels up to 1/8 thick Color/Finish: Black powder coating. Item # Style Panel Height Weight S941 Bolt-in 18 h x 24 w lbs C068 Slide-in 18 h x 24 w lbs C041 Bolt-in 24 h x 24 w lbs Item # Style Panel Height Weight each S942 Bolt-in 36 h x 24 w lbs C062 Slide-in 36 h x 24 w lbs S943 Bolt-in 24 h x 36 w lbs Econo A Frame, EZ Cary Tent Frame & Swinging A Frame Item # Panel Height Weight S986 up to 24 x lbs Item # Panel Height Weight S x lbs S x lbs S986 S940 S904 S986 Frames constructed of 3/4 angle iron and punched with oblong holes (1/4 x 1/2 ) located 14-1/2 o.c. (Panel and plastic sign ties not included) S940 Includes 4 steel channel legs powder coated white and a.100 poly panel (Assembly required) Panel not included S904 Frames constructed of 3/8 rod, Poly straps and hardware included for hanging panels from cross bar, frame powder coated black Picture Frames Item # Style Panel Height Weight S936 Bolt-in 18 h x 24 w 42 7-lbs C023 Bolt-in 20 h x 28 w lbs Frames constructed of 3/4 angle iron Bolt-In frames punched with oblong holes (1/4 x 1/2 ) located 14-1/2 o.c. Slide-In frames punch with die-cut loops and hold panels up to 1/8 thick Color/Finish: Black powder coating. No Rider Frames Item # Style Panel Height Weight S930 Bolt-in 18 h x 24 w lbs S707 Slide-in 18 h x 24 w lbs C069 Slide-in 24 h x18 w lbs C024 Bolt-in 20 h x 28 w lbs S935 Bolt-in 24 h x 24 w 44 8-lbs Item # Style Panel Height Weight C054 Bolt-in 18 h x 30 w lbs Item # Style Panel Height Weight each S932 Bolt-in 24 h x 36 w lbs C028 Slide-in 24 h x 36w lbs Frames constructed of 3/4 angle iron Bolt-In frames punched with oblong holes (1/4 x 1/2 ) located 14-1/2 o.c. Slide-In frames punch with die-cut loops and hold panels up to 1/8 thick Color/Finish: Black powder coating.

25 23 Round Rod Frames Item # Style Panel Height Weight S938 Bolt-in 18 h x 24 w lbs S939 Bolt-in 18 h x 24 w 44 5-lbs S938 Frames constructed of 3/8 round rod S939 Frames constructed of 1/2 round rod Bolt-In frames punched with oblong holes (1/4 x 1/2 ) located 14-1/2 o.c. Color/Finish: Black powder coating. Top/Single Rider Frames Item # Style Panel Height Weight C065 Bolt-in 18 h x 24 w lbs Item # Style Panel Height Weight each C046 Bolt-in 24 h x36 w lbs Frames constructed of 3/4 angle iron Bolt-In frames punched with oblong holes (1/4 x 1/2 ) located 14-1/2 o.c. 6 top rider Color/Finish: Black powder coating. Bottom/Single Rider Frames Item # Style Panel Height Weight C017 Bolt-in 18 h x 24 w lbs S907 Slide-in 18 h x 24 w lbs Item # Style Panel Height Weight each C022 Bolt-in 24 h x 36 w lbs C027 Slide-in 24 h x 36w lbs Frames constructed of 3/4 angle iron Bolt-In frames punched with oblong holes (1/4 x 1/2 ) located 14-1/2 o.c. Slide-In frames punch with die-cut loops and hold panels up to 1/8 thick 6 bottom rider Color/Finish: Black powder coating. Double Rider Frames Item # Style Panel Height Weight C018 Bolt-in 18 h x 24 w lbs S908 Slide-in 18 h x 24 w 42 9-lbs Frames constructed of 3/4 angle iron Bolt-In frames punched with oblong holes (1/4 x 1/2 ) located 14-1/2 o.c. Slide-In frames punch with die-cut loops and hold panels up to 1/8 thick 6 top and bottom rider Color/Finish: Black powder coating.

26 24 Hardware, Accessories, Frame Display Feet Item # Material 20pk 100pk 500pk Sign Clips S945 Black Plastic.40ea.38ea.35ea S991 White Plastic.40ea.38ea.35ea S920 Black Metal.35ea.32ea.30ea Bolts & Wing Nuts C052 Stainless Steel.60ea.55ea.50ea S921 Zinc Coated.30ea.26ea.24ea Plastic Sign Ties S988 Black Plastic 100pk $8.45 Item # For Fits 2/ea 4/ea Use Frame Display Feet S980 Indoor 3/4 angle S981 Indoor 3/8 rod S982 Indoor 1/2 rod S983 Outdoor 3/4 angle Corrugated Plastic Stakes 50 per case Item # Econo Stakes 30 h x 10 w Economy corrugated plastic stakes constructed of 9 gauge 25 per case Item # HD Stakes 30 h x 10 w Heavy Duty corrugated plastic stakes constructed of 3/16 base and 9 gauge wire top, accepts 4mm corrugated plastic. for 22x28 board Item # Rider Wire For putting a top rider on your corrugated sign. Constructed of 9 gauge wire, accepts 4mm coro plastic. Heavy Duty U Wires for 28x44 board Poly-Board (H2O Board) Poly-Board is a 6 ply.024pt waterproof white display board for political and real estate signs, laminated with extruded polyethylene on both sides. Install on U wire x x Skid 22 x 28 ( per skid).49 per sht 28 x 44 ( per skid).98 per sht Item # U h x 20 w U h x 26 w U shaped wire design for political sign. Constructed of 7 gauge wire. use 20 x 33 wires use 26 x 33 wires

27 25 Realicade Realicade Black or White, lightweight (3.5lbs) all-plastic real estate sign frame. This U.V. Protected non-fading color-fast plastic sign frame is also strong, durable, and virtually indestructible. Takes an 18" X 24" and 6" X 24" metal or plastic sign blank. Blanks slide-in or bolt-in. Sign Face Area x 24 Black x 24 White MODEL 20 Great for cutting up to.032 aluminum, magnetic, corrugated plastic and PVC up to 4 mils thick. Extendable table leaf accommodates signs larger than 8 1/2 x 11 $ Model CR-60 Corner Rounder $ Quik Sign A high-density white molded polyethylene fold-out sign frame with molded-in carry handle. Holds 2-18" x 24" sign blanks which easily slide in or out. Weight: 8 lbs; closed thickness: 1-1/2"; overall dimensions: 30.2"H x 25.8"W. Sign Face Area x Simpo Sign II A high-density white molded polyethylene fold-out sign frame with molded-in carry handle and molded-in regress area. With overall dimensions of 36"H x 24"W and closed thickness of 2", Simpo Sign II is lightweight and durable, and holds 2 vertical - 22" x 28" sign blanks. Max. blank thickness - 1/4". Sign Face Area x Sidewalk Sign A high density white molded polyethylene fold-out sign frame for 24" x 36" sign blanks. Use coroplast, aluminum, acrylic, or any foamboard. Blanks slide in and out easily and stay in place securely. Outrigger feet can be sand filled and slide into place and "click-lock" into position with no tools required. Molded-in tie down hole allows for chaining or wiring for security purposes. Sign Face Area x Signicade Sign Stands Signicades are portable, hollow barricade-like foldout sign frames, made from molded recycled polyethylene, with molded-in carry handle, available in white or yellow. Can be ballasted with sand, for stability in high wind conditions; free funnel available. Plastic or aluminum sign blanks can be attached with Signicade Wellnuts. Signicades have solid one-piece faces. Sign Face Area Color x 24 White x 24 Yellow Designed especially for the sign industry Features a one ton press capacity Interchangeable tables, which allow for quick changes of dies Shear capacity of up to.080 half hard aluminum Table size: 9 x 9 Fasnap Grommet Machine and Die Includes grommet machine & one die set $ Cast Aluminum $ Cast Iron Fasnap Self-Piercing Grommets Material ID 100sets 500sets #1 Nickel or Brass 5/ #2 Nickel or Brass 3/ #3 Nickel or Brass 7/ #4 Nickel or Brass 5/ Chrome Plated Wall Rack Heavy gauge wire constructed rack holds sixteen (16) rolls of 3 inch core diameter material without using valuable floor space. This rack is durable enough to hold even up to 16 rolls of 30 x 50 yd. material with ease. Proper storage of pressure sensitive materials dictate supporting rolls by the core to avoid adhesive activation. Included are adjustable screw mounting clips, allowing alignment with studs in most walls. Holds up to 30 x 50 yds. Material. $45.00 Material Floor Rack Holds 16 Rolls of sign making material Heavy Square Tube Construction Powder Coated Silver Vein ( Black) finish Heavy Duty Nylon Casters Holds 1000 lbs of Product No Assembly Required Shipping Weight: 50 lbs. Measures 26" x 26" 14" $231.00

28 26 Cutter Item# Allen Datagraph/Roland RLC Anagraph Express ANEX N/A Anagraph Excel ANEX N/A Gerber (Flat) Our high quality Plotter Blades are made of ultra fine grain carbide, for a long lasting, super sharp cutting edge! GB Gerber GSX GB / Graphtec 09U WG09U N/A Graphtec 15U WG15U N/A Ioline (Studio 7&8) IO Master M N/A Mimaki MK 37 / / /14.75 Mutoh SC MTSC Mutoh XP MTXP Pcut (CT-630) PCT N/A Roland (ZECU Style) small characters RLZ Roland (Camm Style) RLC Summa (D-Style) SGD 35 /13.95 N/A Summa (T-Style) SGT 36 /15.95 N/A Zeta ZT N/A Other Plotter Blades Available Call For s Roland/compatable Econo Carbide Blades Small Character Blade 1ea $5.95 5pk $24.95 Standard Blade 1ea $6.95 5pk $29.95 Roland Blade Holders Cutter Protection Strips Pens Call Customer Service For s

29 27 Vector Art is a unique and profitable resource for computerized signmaking Unlike other "clipart" bundles, Vector Art is created by some of the best sign and vehicle graphic artists in the world. This original artwork is scanned, vectorized and painstakingly "cleaned up" by our editors and then expertly formatted for trouble free import to sign and graphics programs. Go to ( for sample art. Mega Collection Mega Collection II Mega Collection III LARGE, HIGH-RES IMAGES : Street Racer The Street Racer Graphic Collection consists of 66 designs by Steve Kafka, Dr. Torch and Acey Sterling. Each Graphic has been converted with special effect filters into unique and stunning bitmapped files. Each of these designs has then been coordinated in nine (9) color palates which will provide superior visual effects with modern vehicle paint pigments. The bitmapped files are provided in.tif format and a perfect vector file in.ai and.eps for contour cutting is included for each design. The Vector Art Street Racer Graphic Collection will turn your large format printer into a money-making machine like none you have ever had in your shop. Go to ( for sample art. LARGE, HIGH-RES IMAGES : SIGN BLANKS Vector Art is pleased to offer our selection of high-res, royalty-free sign blanks for large format printing. All images are available for individual download, and are also part of the Vector Art Digital Mega Collection. Go to ( for sample art. Street Racer Graphic Collection Sign Blanks Art LARGE, HIGH-RES IMAGES : SIGN FILLS Vector Art is pleased to offer our selection of high-res, royalty-free sign fill textures and backgrounds for large format printing. All images are available for individual download, and are also part of the Vector Art Digital Mega Collection. Go to ( for sample art. LARGE, HIGH-RES IMAGES : Chalk-Art Each sign comes with its own (digital) oak frame, ready to give you instantaneous "signs-to-go". The wood frames print right along with the sign! You can crop the frame to wrap around a substrate, giving a real "wood" look. PERFECT RESOLUTION UP TO 4' X 6' The images will successfully print on large or small format printers, providing beautiful images at any size up to 5' x 6'. Print on vinyl, paper or canvas. Go to ( for sample art. Sign Fills Art Chalk-Art

30 28 Mimaki / Solaris Inks Mfg in the USA by LiqueColor, Inc Roland & Mutoh Solaris Eco- Inks Mfg in the USA by LiqueColor, Inc 1-3 ea. 4+ ea. Black 220ml Cyan 220ml Magenta 220ml Yellow 220ml Light Magenta 220ml Light Cyan 220ml Flush Fluid 220ml Black 440ml Cyan 440ml Magenta 440ml Yellow 440ml Light Magenta 440ml Light Cyan 440ml Flush Fluid 440ml Black 1-Liter Cyan 1-Liter Magenta 1-Liter Yellow 1-Liter Light Magenta 1-Liter Light Cyan 1-Liter Flush Fluid 1-Liter Colors 1-3 ea. 4+ ea. Black Eco-Sol 220ml Cyan Eco-Sol 220ml Magenta 220ml Yellow 220ml Light Magenta 220ml Light Cyan 220ml Flush Fluid 220ml Black Eco-Sol 440ml Cyan Eco-Sol 440ml Magenta 440ml Yellow 440ml Light Magenta 440ml Light Cyan 440ml Flush Fluid 440ml Black Eco-Sol 1-Liter Cyan Eco-Sol 1-Liter Magenta 1-Liter Yellow 1-Liter Light Magenta 1-Liter Light Cyan 1-Liter Flush Fluid 1-Liter Roland/Mutoh/Mimaki Bulk Ink Systems 820ml bulk ink cartridge-front fill ml bulk ink cartidge-rear fill ltr 4 bottle /4 cart. system ltr 4 bottle/8 cart. system 1, ltr 6 bottle/6 cart. system 1, ltr 6 bottle/12 cart. system 1, ltr System 820ml System

31 29 Mutoh JV3, JV33, JV5, Mutoh ValueJet and Roland Inks MaraJet DI-LS is a replacement ink for wide format solvent printers. A perfect color match allows users to simply install MaraJet DI-LS 440 ml cartridges into the printer when their current cartridges are emptied. MaraJet inks offer outstanding performance and value for your printing needs by combining excellent light fastness, vivid color density and a wide color gamut. Sold in 220, 440 ml cartridges and 1L bulk containers MaraJet saves time and money. 1-3 ea. 4+ ea. Black 220ml Cyan 220ml Magenta 220ml Yellow 220ml Light Magenta 220ml Light Cyan 220ml Black 440ml Cyan 440ml Magenta 440ml Yellow 440ml Light Magenta 440ml Light Cyan 440ml Unbeatable Support Clearstar LP has been providing ink and liquid laminates to the digital print industry since We are fully aware of the issues customers face when they choose not to use the ink provided by their printer manufacturer and are ready to help you succeed. MaraJet DI-LS is backed by our 100% customer satisfaction money back guarantee. Bulk Ink Systems Roland SP Roland VP Roland Pro III Mimaki JV3 CMYC Black 1-Liter Cyan 1-Liter Magenta 1-Liter Yellow 1-Liter Light Magenta 1-Liter Light Cyan 1-Liter

32 30 Roland GX-24 Roland vinyl cutters are the most popular cutters in the sign industry and the GX-24 is no exception. The Roland GX-24 Vinyl Cutter is the best choice for cutting vinyl letters for racecars, vans, cars, boats and trucks. Roland vinyl cutters give you the highest quality along with great reliability making them the perfect cutter for all your signmaking needs. Whether you are starting a new business or need the latest in sign technology, a Roland GX-24 vinyl cutter will give you the speed, efficiency and dependability you deserve. Let us inspire your creativity. Your GX-24 Cutter GX-24 Cutter & Stand Roland GX-300/400/500 Roland cutters, the most popular cutters in the sign industry. The best choice for cutting vinyl letters for racecars, vans, cars, boats and trucks. Roland cutters give you the highest quality along with great reliability making them the perfect cutter for all your signmaking needs. Whether you are starting a new business or needing the latest in sign technology, a Roland cutter will give you the speed, efficiency and dependability you deserve. Let us inspire your creativity. (GX-300/30, GX400/40, GX ) All come with stands. Your GX-300 Pro Cutter GX-400 Pro Cutter GX-500 Pro Cutter Daige Solo Cold Laminators With your Solo you can laminate media from long wraps down to smaller inkjet photos. Even if you are using solvent or archival inks, laminating offers important benefits. List Solo25 (25 width) Solo38 (38 width) Solo55 (55 width) Solo65 (65 width) Footswitch STS-Stand Daige Maxit- motorized roller coaters Automatically warms up to the proper temperature in about 55 minutes. Press the motor switch, feed your print into the turning rollers and the print automatically receives a smooth, even adhesive coating. Runs at 4 seconds per ft. Heat will not effect inkjet or laser prints. No daily or monthly maintenance. Available in 12, 24 ½ and 36 ½ coating widths. Maxit MX Maxit MX 24 24½ Maxit MX 36 36½ Maxit Adhesive Refills 7-bags Maxit Adhesive Refills 28-bags

33 31 ThermoFlex Plus ThermoFlex Plus is a thermal transfer film for cotton, polyester, Spandex, Lycra, wool, linen and some athletic mesh garments. This material will NOT adhere to nylon. Application Parameters: degrees F / 20 seconds / Firm to hard pressure / Peel warm or cold. Colors 1-7 roll 8+ roll 15 x 5yd standard colors x 25yd standard colors x 5yd gold & silver x 5yd neon x 5yd metal flake ThermoFlex Xtra ThermoFlex Xtra is a thermal transfer film for application to nylon and leather, as well as siliconized materials with sufficient surface material for adhesive to grip, when transferred according to directions. Available in punched or non-punched. Colors 1-8 roll 8+ roll 15 x 5yd standard colors x 25yd standard colors x 5yd gold & silver ThermoFlex Sport ThermoFlex Sport is a durable thick film material designed to bridge the gaps in open-mesh athletic jersey. You can heat press ThermoFlex Sport at a relatively low (300 F F) temperature and short dwell time (8-10 seconds), which minimizes dye migration from colored polyester jersey mesh. Colors Roll 13-3/4 x 5yd standard colors Teflon Release Sheet A release sheet to be placed between the heat platen and the plastic carrier sheet to prevent sticking and edge damage to the transferred design. 1-3ea 4+ea 16 x 18 sheet x 19 sheet SuperGold - DecoFilm These computer cut heat transfer films transfer at 310 F to 330 F with firm pressure for seconds. They will adhere to most sportswear and t-shirt fabrics which can withstand the transfer application temperature, pressure and dwell time. These are bright shiny metallics. Colors Roll 15 x 5yd standard colors x 25yd standard colors ColorPrint Solvert CPS2160 This is a gloss white polyurethane material designed for printing with solvent or eco-solvent ink jet print engines. ColorPrint transfers to cotton and blended fabrics, polyester fabrics, and has been successfully applied to other fabrics including nylon and spandex. Colors Roll 24 x 5yd White EasyWeed EasyWeed is a polyurethane, ready-to-cut material designed for custom garment decoration. EasyWeed is in a league of its own because of its pressure sensitive carrier. This feature allows you to weed small letters and fine designs easily. Much thinner than other film materials, EasyWeed offers excellent durability, even after repeated washings. It s great for player names and numbers or adding personalization to corporate wear. Because of its thinness, it s extremely easy to cut, weed, and heat apply and is perfect for single color or multi-layered applications. This is a HOT PEEL product. Colors 1-4 rolls 5+ Rolls 15 x 5yd standard colors x 10yd standard colors x 25yd standard colors x 5yd electric colors x 10yd electric colors x25yd electric colors x 5yd fluorescent colors x 10yd fluorescent colors x 25yd fluorescent colors x 5yd metallic colors x 10yd metallic colors x 25yd metallic colors (You may mix rolls for 5 roll discount)

34 32 Changeable Letters.030 &.060 Letters slide together for perfect spacing every time. These flat letters are made of durable acrylic and are clear coated for scratch resistance. Description Item# on 3 (.030) 299 Set 3 on 4 (.030) 270 Set 8 on 9 (.060) 270 Set 8 on 9 Condensed (.030) 300 Set 8 on 9 Bold (.030) 312 Set 6 on 7 Condensed (.030) 279 Set 4 on 5 Bold (.060) 336 Set (Push Up / Drop Down) 6 on 7 Bold (.030) 288 Set 4 on 5 Bold (.030) 273 Set 8 on 10 Bold (.030) 302 Set 10 on 11 Bold (.030) 310 Set 8 on 10 (.060) 302 Set 6 on 7 (.060) 288 Set Description Item# on 9 (.030) 300 Set (Colored Letters sets in Blue, Green, Pink, Red) Description Item# pk Quality Track 7-½ ft for (.030 letters) # ea 1.99 ea 1.69 ea Heavy Duty Track 8ft for (.060 letters) # ea 4.50 ea 3.99 ea This catalog does not show all products If you do not see something you need Call: Toll Free: