Studio Spot 575 CMY/CMY Zoom Menu Map
|
|
- Prosper Thompson
- 6 years ago
- Views:
Transcription
1 Studio Spot 575 CMY/CMY Zoom Menu Map AddR INFO LAMP F### C### L L STRK Change existing Fixture number or DMX start channel (Menu option selected in INFO/DMx/FIxT/SRCE) DIsplays Lamp State as, or attempting to STRIKE. L/HR #### Displays current lamp hours ## and minutes ## L/ST #### Displays number of lamp strikes VER #### Displays fixture s software version L/RS HOLd-0000 Press and hold the <Enter> button until the display shows 0000 to reset lamp hours to zero F/HR H### M ## Displays total hours and minutes the fixture has run F/RS HOLd Press and hold the <Enter> button until the display shows to reset fixture hours to zero CURR ###C Displays current internal temperature in centigrade MINT ###C Displays minimum internal temperature in centigrade TEMP MAxT ###C Displays maximum internal temperature in centigrade dmx RST FIxT HOLd 0000 Press and hold the <Enter> button until the display shows 0000 to reset min and max temp to zero ERRS #### Displays DMX errors CNTL Displays Control channel DMX value MACR Displays Macro DMX value MSPd Displays MSpeed DMX value dim Displays Dim DMX value SHUT Displays Shutter DMX value IRIS Displays Iris DMX value FCUS Displays Focus DMX value FRST Displays Frost DMX value (Zoom value in models with zoom lens) LRL Displays Litho wheel rotation DMX value (low byte) LRH Displays Litho wheel rotationdmx value (high byte) LT Displays Litho wheel aperture position DMX value LTC Displays Litho wheel control channel DMX value LRL Displays Litho wheel rotation DMX value (low byte) LRH Displays Litho wheel rotationdmx value (high byte) LT Displays Litho wheel aperture position DMX value LTC Displays Litho wheel control channel DMX value YELW Displays Yellow channel DMX value MAGN Displays Magenta channel DMX value CYAN Displays Cyan channel DMX value COLC Displays Color Control channel DMX value TLTL Displays Tilt DMX value (low byte) TLTH Displays Tilt DMX value (high byte) PANL Displays Pan DMX value (low byte) PANH Displays Pan DMX value (high byte) STRT Displays Start code D Studio Spot 575 CMY/CMY Zoom Menu Map page
2 INFO TEST MOdE dmx SENS HOME ENCd S/UP SELF FIxT data CE Not used SRCE LINK Indicates the fixture data source OV #### Displays overrun errors FE #### Displays framing errors C00 - C Displays current DMX value of the selected Channel Checks that the pan encoder is functioning (A working encoder will change value in the display as the pan position of fixture head is manually changed) Checks that the tilt encoder is functioning (A working encoder will change value in the display as the pan position of fixture head is manually changed) Displays pan homing tab sensor status Displays tilt homing tab sensor status Displays color wheel homing tab sensor status Displays litho wheel homing tab sensor status Displays the litho wheel homing tab sensor status Displays power- to-sensor status Initiates a sequence that homes the fixture Turns on power to the encoders Disables the encoders for servicing PPOS #### TPOS #### SENP SENT COL LT LT SVCC Lamp strikes automatically to perform tests. boot LAMP disp xld TYPE STAT L L SET NOW ALL PAN TILT CO CO LT LT FTST FCUS IRIS SHUT dim Places the fixture in setup mode for mechanical homing. (Press menu button to exit.) Tests all constructs Tests shutter strobe movement Tests iris movement Tests focus lens movement Tests frost flag (Tests lens in models with Zoom option) Tests litho wheel rotation Tests litho wheel rotation Tests litho wheel movement Tests litho wheel movement Tests color mixing wheel pair movement Tests color mixing wheel pair movement Tests color mixing wheel pair movement Reboots the fixture Displays the current lamp status Extinguishes the lamp Strikes the lamp Tests the alphanumeric LED display Crossloads fixture software to all other Studio 575 Series fixtures on the link COLR Identifies the fixture as a Studio Color 575 Identifies the fixture as a Studio Spot 575 (Zoom SPOT and CMY features are automatically detected) page Studio Spot 575 CMY/CMY Zoom Menu Map
3 SET FACT Sets factory defaults on Current settings are overriding factory defaults LENS NORM Selects Standard lens option ZOOM Selects Zoom lens option dlos SHRT Shuts fixture down minutes after DMX data loss LG Shuts fixture down second after DMX data loss CHNL AddR Sets the Addressing method to fixture number dmx Sets the Addressing method to DMX start channel Turns the display on dspl Turns the display off dim Dims the display d/in Selecting inverts the alphanumeric display orientation P/IN Selecting inverts pan movment direction T/IN Selecting inverts tilt movement direction SWAP Selecting swaps pan and tilt movement S/dN 5 MN Sets shutdown time at 5 minutes 0 MN Sets shutdown time at 0 minutes COdE FACTORY USE LY FAST CMY MEd SLOW Selects the speed of CMY changes. Factory default is slow. Starts playback PLAY Stops playback SCN Displays which scene is playing SEND OK? Crossloads all presets to other Studio Spot fixtures on the link. dflt OK? Enables the factory-programmed preset scene sequence (selfdemo) / erases any preset scenes previously programmed CAPT SN0-SN6 Captures a snapshot of DMX data being received and stores it in the selected scene. COPY FROM F00-F6 Selects a scene to copy from (source scene) TO T00-T6 Selects a scene to copy to (destination scene) OPEN Fully opens the shutter CLSd Closes the shutter P 0 P Strobes the shutter at specified periodic intervals from slow (P 0) to fast (P ) N 0 N Strobes the shutter at random intervals from slow(n 0) to fast (N ) SHUT RS0 RS Snaps shutter open, ramps shut slow (RS0) to fast (RS) SN0- SN6 SR0 SR Ramps shutter open from slow (SR0) to fast (SR), then snaps shutter closed NS0 NS Snaps shutter open randomly, then ramps closed from slow (NS0) to fast (NS) NR0 NR Ramps shutter ramp open randomly, from slow (NR0) to fast (NR), then snaps shutter closed dim d000 d55 Selects a dim value from dark (d000) to bright (d55) PAN Selects a pan value TILT - + Selects a tilt value D Studio Spot 575 CMY/CMY Zoom Menu Map page
4 C Positions the color wheels in continuously-variable, Full speed mode COLC MC Positions the color wheels in continuously-variable Mspeed mode Tbd To be Determined - Reserved for future use MTbd To be Determined - Reserved for future use CYAN 0-55 Selects cyan value from full (0) to open white (55) MAGN 0-55 Selects magenta value from full (0) to open white (55) YELW 0-55 Select yellow value from full (0) to open white (55) Idx Snaps to selected aperture position at Full Speed FSP Spins Litho wheel forward at a variable speed. RSP Spins Litho wheel in reverse at a variable speed. WSP Litho Wheel rotates continually (0-60 ). FSC Fast scaning one full position on each side of the selected litho) at Full Speed. LTC wheel control) RNd bkw bka MIdx MFSP Variable-speed random aperture position selection. Closes dim flags between aperture position changes. Closes dim flags between aperture rotation changes. Same as Idx with MSpeed Same as FSP with MSpeed MRSP Same as RSP with MSpeed MWSP Same as WSP with Mspeed MFSC Same as FSC with MSpeed MRNd Same as Rnd with MSpeed SN0- SN6 MbKW MbKA L-L6 Same as bkw with MSpeed Same as bka with MSpeed Selects litho position - 6 at full or Mspeed (LTC=Idx or MIdx) LF-LF6 Sets forward wheel spin speed from stop fast at full speed or Mspeed (LTC=FSP or MFSP) LT wheel position) LR-LR6 SC-SC6 bw-bw6 Sets reverse wheel spin speeds from slow fast (LTC= RSP or MRSP) Selects litho position from -6 to scan at full or Mspeed. (LTC= FSC or MFSC) Selects litho position with blink between position change or aperture rotation change at full speed or Mspeed. (LTC= FSP, WFSP, WSP, or MWSP) RANd A litho position cannot be assigned when LTC = RNd WSPN A litho position cannot be assigned when LTC = WSP d000-d58 Rotates a selected aperture to a position from 0 to 60 at full speed or Mspeed (LTC = Idx, bkw, bka, MIdx, MbKW, or MbKA) F000-F55 Set forward aperture rotation speed from stop (F000) to fast (F55) at full speed or Mspeed (LTC=FSP or MFSP) LTR wheel rotation) R000- R55 S000-S55 N000-N55 Set reverse aperture rotation speed from stop (R000) to fast (R55) at full speed or Mspeed (LTC=RSP or MRSP) Sets fast scan speed from slow (S000) to fast (S55) to fast at full speed or Mspeed (LTC=FSC or MRNd) Sets a pause time between random litho selections from stop (N000) to fast (N55) (LTC= RNd or MRNd) WF0-WF99 Sets wheel spin speed forward slow (WF0) to fast (WF99) at full speed or Mspeed ( LTC= WSP or MWSP) WR0-WR99 Sets a litho wheel reverse spin speed from slow (WR0) to fast (WR99) at full speed or Mspeed (LTC = WSP or MWSP) page Studio Spot 575 CMY/CMY Zoom Menu Map
5 Idx Snaps to selected aperture position at Full Speed FSP Spins Litho wheel forward at a variable speed. RSP Spins Litho wheel in reverse at a variable speed. WSP Litho Wheel rotates continually (0-60 ). FSC Fast scaning one full position on each side of the selected litho) at Full Speed. LTC (Litho wheel Control) RNd bkw bka MIdx MFSP Variable-speed random aperture position selection. Closes dim flags between aperture position changes. Closes dim flags between aperture rotation changes. Same as Idx with MSpeed Same as FSP with MSpeed MRSP Same as RSP with MSpeed MWSP Same as WSP with Mspeed MFSC Same as FSC with MSpeed MRNd Same as Rnd with MSpeed MbKW Same as bkw with MSpeed MbKA L-L6 LF-LF6 Same as bka with MSpeed Selects litho position - 6 at full or Mspeed (LTC=Idx or MIdx) Sets forward wheel spin speed from stop fast at full speed or Mspeed (LTC=FSP or MFSP) D SN0 - SN6 LT wheel position, cont.) LR-LR6 SC-SC6 bw-bw6 RANd Sets reverse wheel spin speeds from slow fast (LTC= RSP or MRSP) Selects litho position from -6 to scan at full or Mspeed. (LTC= FSC or MFSC) Selects litho position with blink between position change or aperture rotation change at full speed or Mspeed. (LTC= FSP, WFSP, WSP, or MWSP) A litho position cannot be assigned when LTC = RNd WSPN A litho position cannot be assigned when LTC = WSP d000 -d58 Rotates a selected aperture to a position from 0 to 60 at full speed or Mspeed (LTC = Idx, bkw, bka, MIdx, MbKW, or MbKA) F000 - F55 Set forward aperture rotation speed from stop (F000) to fast (F55) at full speed or Mspeed (LTC=FSP or MFSP) LTR wheel rotation) R000 - R55 S000 -S55 N000 -N55 Set reverse aperture rotation speed from stop (R000) to fast (R55) at full speed or Mspeed (LTC=RSP or MRSP) Sets fast scan speed from slow (S000) to fast (S55) to fast at full speed or Mspeed (LTC=FSC or MRNd) Sets a pause time between random litho selections from stop (N000) to fast (N55) (LTC= RNd or MRNd) WF0 -WF99 Sets wheel spin speed forward slow (WF0) to fast (WF99) at full speed or Mspeed ( LTC= WSP or MWSP) WR0 -WR99 Sets a litho wheel reverse spin speed from slow (WR0) to fast (WR99) at full speed or Mspeed (LTC = WSP or MWSP) FCUS 0-55 Adjusts focus (Sets Zoom in fixtures with Zoom lens) OPEN Opens iris fully F00 - F7 Adjusts iris P - P5 Sets periodic strobe speed effect IRIS R - R5 RS - RS5 Selects random strobe speed effect Ramps iris open and snaps shut SR - SR5 Snaps iris open and Ramps shut NR - NR5 Ramps iris open randomly and snaps shut NS - NS5 Snaps iris open and ramps shut Studio Spot 575 CMY/CMY Zoom Menu Map page 5
6 MSPd Selects an MSpeed value in decimal seconds from fast (0.5) to slow (5.7) MACR MROF Sets the macro option off MR0 - MR8 Selects a factory-programmed macro from to 8 SN0 - SN6 xfad dlay x0. - x9.9 x0 - x66 Selects the dim and FCUS construct s crossfade time in increments of 0. Selects the dim and FCUS construct s crossfade time in increments of.0 x0. - x9.9 Selects the scene delay time in increments of 0. x0 - x66 Selects the scene delay time in increments of.0 SEC Selects seconds as the units of time used for the xfad and dlay constructs TIME MIN Selects minutes as the units of time used for the xfad and dlay constructs HOUR Selects hours as the units of time used for the xfad and dlay constructs ZERO OK? Erases any programming of the current scene by voiding all construct values / mark the end of a loop page 6 Studio Spot 575 CMY/CMY Zoom Menu Map
change the existing DMX start channel set preset playback off set preset playback on display which scene is currently playing CLSD close the shutter
Appendix D Map The Studio Beam fixture s onboard menu system allows you to: Assign a DMX start channel Access fixture options such as, homing the fixture, viewing fixture status, crossloading software,
More informationSolaWash 2000 Luminaire DMX Control Protocol *
SolaWash 2 Luminaire DMX Control Protocol * Revision: 1.3 27-Feb-18 Standard Prototocol Channel Construct 1 Pan Coarse 2 Pan Fine 3 Tilt Coarse 4 Tilt Fine 5 Mix Color Function 6 Cyan 7 Magenta 8 Yellow
More informationRobin CycFX 8- DMX protocol
Version 1.4 Robin CycFX 8 Robin CycFX 8- DMX protocol Mode/Channel Value Function Type of control 1 2 3 4 5 6 7 1 1 1 1 1 1 1 Tilt (8 bit) Tilt movement by 270-2 2 2-2 2 Tilt (16 bit) Fine movement of
More informationDMX Channel Index. Software v
DMX Channel Index Software v. 28-40-31-27 GLP impression E350 DMX Channel Index Revision A This user manual covers fixture software version v. 28-40-21-27 2018 German Light Products GmbH. All rights reserved.
More informationRogue R2 Spot DMX Chart. DMX Values. 21CH Channel Function Value Percent/Setting. 1
DMX Values 1 Pan 000 255 0 100% 2 Fine Pan 000 255 0 100% 3 Tilt 000 255 0 100% 4 Fine Tilt 000 255 0 100% 5 Pan/Tilt Speed 000 255 0 100% 6 Dimmer 000 255 0 100% 7 Fine Dimmer 000 255 0 100% 000 003 Closed
More informationELATION PLATINUM 1200 WASH DMX Channel Values / Functions (93 Total DMX Channels) Supports Software Versions: 2.1.0
10 6 11 12 13 17 18 20 21 22 23 24 1 1 1 2 2 2 3 3 3 5 4 4 6 4 7 8 5 9 14 15 16 19 5 6 7 8 9 10 11 12 PAN MOVEMENT [8 BIT] 0-255 PAN Movement PAN FINE MOVEMENT [16 BIT] 0-255 Fine Control of PAN Movement
More informationRogue R2 Beam DMX Chart. DMX Values. 18CH Channel Function Value Percent/Setting. 1
DMX Values 1 Pan 000 255 0 100% 2 Fine Pan 000 255 0 100% 3 Tilt 000 255 0 100% 4 Fine Tilt 000 255 0 100% 5 Pan/Tilt Speed 000 255 0 100% 6 Dimmer 000 255 0 100% 7 Fine Dimmer 000 255 0 100% 000 007 Closed
More informationRogue R1 Spot DMX Chart. DMX Values. 19CH Channel Function Value Percent/Setting. 1
DMX Values 1 Pan 000 255 0 100% 2 Fine Pan 000 255 0 100% 3 Tilt 000 255 0 100% 4 Fine Tilt 000 255 0 100% 5 Pan/Tilt Speed 000 255 0 100% 6 Dimmer 000 255 0 100% 7 Fine Dimmer 000 255 0 100% 8 Shutter
More informationQUICK REFERENCE GUIDE
Main Level Programming Levels Description Pan Reverse Reverse pan operation Normal pan operation Tilt Reverse Reverse tilt operation Normal tilt operation Screen Rev Normal control screen view Rotates
More informationProgramming Notes 10/20.
Programming Notes 10/20 support@germanlightproducts.com www.germanlightproducts.com This guide will serve as an outline for the various DMX modes for the X4 BAR 10 and X4 BAR 20 with a focus on Normal
More informationEmotion Luminaire DMX Control Protocol *
Emotion Luminaire Control Protocol * Standard Prototocol Collage/Keystone Prototocol Channel Construct Channel Construct Pan Coarse Pan Coarse 2 Pan Fine 2 Pan Fine 3 Tilt Coarse 3 Tilt Coarse Tilt Fine
More informationDMX protocol. Robin SPIKIe - DMX protocol
protocol Robin SPIKIe - protocol Version: 1.4 (version of processor m: 2.2 and higher) Mode 1-Standard 16-bit, Mode 2 -Reduced 8-bit Mode/channel 1 1 Pan (8 bit) 0-255 Pan movement by 540 /360 (128=default)
More informationDMX Channel Index. X4 Bar 10. from software version: v0.26.
DMX Channel Index X4 Bar 10 from software version: v0.26 support@glp.de www.glp.de 1 Normal Mode (norm) 33 DMX Channels: Channel Function Time and Value DMX 1 Tilt - High Tilt coarse 0-210 0..255 2 Tilt
More informationServoDMX OPERATING MANUAL. Check your firmware version. This manual will always refer to the most recent version.
ServoDMX OPERATING MANUAL Check your firmware version. This manual will always refer to the most recent version. WORK IN PROGRESS DO NOT PRINT We ll be adding to this over the next few days www.frightideas.com
More informationPhilips Vari-Lite TECHNICAL FOCUS: PRODUCT IN DEPTH
Copyright Lighting&Sound America November 2018 http://www.lightingandsoundamerica.com/lsa.html Philips Vari-Lite VL2600 Spot By: Mike Wood Light source and cooling The VL2600 Spot uses a new (or, at least,
More informationDMX Channel Index. from software version: v
DMX Channel Index from software version: v0.60 10 support@glp.de www.glp.de You can choose between 7 DMX modes each designed for different applications and preferences: Normal Mode (33 Channels): Most
More informationDMX protocol. Robin LEDdBeam 150/Robin LEDBeam 150 FW - DMX protocol
protocol Mode/channel Robin LEDdBeam 150/Robin LEDBeam 150 FW - protocol Version: 1.4 Mode 1-Standard 16-bit, Mode 2 -Reduced 8-bit 1 1 Pan (8 bit) 0-255 Pan movement by 450 (128=default) proportional
More informationAyrton GHIBLI TECHNICAL FOCUS: PRODUCT IN DEPTH
Copyright Lighting&Sound America May 2018 http://www.lightingandsoundamerica.com/lsa.html Ayrton GHIBLI By: Mike Wood Figure 2: Heat sink and fans. Light source The light source in the Ghibli is a familiar-looking
More informationFOLLOWSPOT CONTROLLER
SOFTWARE VERSION 2.0 WWW.PRG.COM FOLLOWSPOT CONTROLLER USER MANUAL AutoPar, Bad Boy, Best Boy, Followspot Controller, Mbox, Mini Node, Nocturne, Series 400, ReNEW, Super Node, V476, V676, and Virtuoso
More informationLC-RF, LC-IR, LC-PC PRODUCT OFFERING. Type. Project LED RGB CONTROLLER SOLUTION GUIDE LC SERIES. Catalog No.
PRODUCT OFFERING Control Image Radio Frequency - Controlled with remote up to 30 ft away - Controller can be hidden - Max 1 controller per location LC-RF-300 Allows user to control RGB lights from remote
More informationMedia Server Version 2.0 DMX Protocol
Media Server Version 2.0 DMX Protocol All Media Servers utilize the same DMX protocol with the exception of a reduced number of graphic layers in DL.2 fixtures and original Axon media servers. DL.3 and
More informationCreating Custom Fixtures
Application Note Introduction There are two types of custom fixture available within Designer: Alias Fixtures Custom Fixtures The difference between these is that an Alias fixture is a copy of a fixture
More informationMedia Server Version 1.0 DMX Protocol
Media Server Version 1.0 DMX Protocol All Media Servers utilize the same DMX protocol with the exception of a reduced number of graphic layers in DL.2 fixtures and original Axon media servers. DL.3 and
More informationDMX Chart Force 120. Firmware Version
DMX Chart Force 120 Product Information Firmware Version 1.25 support@glp.de www.glp.de GLP German Light Products GmbH Industriestr. 2, 76307 Karlsbad, Germany Tel: +49 (0)72 48 / 927 19 0, Fax: -30, E-Mail:
More informationUSER S MANUAL. This manual must be considered an integral part of the projector. The user must read this manual before using the projector
575W HMI Scan light ZIPPER 575 USER S MANUAL This manual must be considered an integral part of the projector. The user must read this manual before using the projector AUTHORISED AND QUALIFIED PERSONNEL
More informationInstruction Manual. from software version: v045.
Instruction Manual from software version: v045 support@glp.de www.glp.de Contents 1 Description of Device... 3 2 Safety Instructions... 4 3 Preparation and Installation... 6 3.1 Mounting... 6 3.1.1 Operating
More informationK-EYE HCR CHANNEL K10 / K20 S10 / S RED
K-EYE HCR Channels 07/2017 K-EYE HCR K10 / K20 K-EYE HCR S10 / S20 1 1 RED CHANNEL 2 2 RED FINE 3 3 AMBER 4 4 AMBER FINE 5 5 LIME 6 6 LIME FINE 7 7 GREEN 8 8 GREEN FINE 9 9 CYAN 10 10 CYAN FINE 11 11 BLUE
More informationIntroduction. Purpose
Page 1 of 6 SUBJECT: VL1000 / VL2000 Luminaire Software SERIES: 1000/2000 DISTRIBUTION: Service Centers, End Users STATUS: Routine Introduction 10 minutes Purpose Software Version 4.8 containing updated
More informationInstruction Manual. from software version: v
Instruction Manual from software version: v0.60 10 support@glp.de www.glp.de Contents 1 Description of Device... 3 2 Safety Instructions... 4 3 Mounting... 6 3.1.1 Operating on the Floor (Upright)... 7
More informationVL1000 Software Version History VL1000 3/25/02 4/10/02 4/15/02 4/25/02 5/16/02 6/25/02 7/09/02 8/08/02
Page 1 of 5 SUBJECT: VL1000 Luminaire Software Version History SERIES: 1000 DISTRIBUTION: Service Centers, End Users STATUS: Routine Introduction VL1000 Software Version History This technical bulletin
More informationWinston C Hall Tuner Photography
D4s Custom Banks Settings Shooting and Custom Setting Menus Created by: Winston C Hall Tuner Photography 714 D4s Shooting and Custom Settings Banks This guide is an outline of my recommendations for the
More informationInstruction Manual. X4 Bar 20. from software version: v
Instruction Manual X4 Bar 20 from software version: v0.26 support@glp.de www.glp.de Contents 1 Description of Device... 3 1.1 Safety Instructions... 4 2 Preparation and Installation... 5 2.1 Safety Information...
More informationVR8 - VR8R edition. Abstract Design to Light 1998 Tel:
VR8 - VR8R Abstract Design to Light 1998 Tel:0116 278 8078 http://www.abstract-lighting.co.uk VR Instruction Manual - Issue 1.2: May 2000 Written for Abstract Design to Light by Sabre Technology Ltd: 01482
More informationInstruction Manual. X4 Bar 10. from software version: v
Instruction Manual X4 Bar 10 from software version: v0.26 support@glp.de www.glp.de Contents 1 Description of Device... 3 1.1 Safety Instructions... 4 2 Preparation and Installation... 5 2.1 Safety Information...
More informationBMFL FollowSpot. Light source 1700 W OSRAM Lok-it! HTI 1700/PS. LIGHT OUTPUT lm, m, m.
BMFL FollowSpot Created specifically for follow-spot operation, this custom modified version of BMFL comes with specific features to provide both motorised movement and manual operation with follow-spot
More informationVR8 - VR8R 2000 edition
email: enquiries@sxsevents.co.uk VR8 - VR8R Abstract Design to Light 1998 Tel:0116 278 8078 http://www.abstract-lighting.co.uk VR Instruction Manual - Issue 1.2: May 2000 Written for Abstract Design to
More informationinstabus EIB product documentation
Page: 1 of 39 Push button interface 4-gang Sensor Product name: Push button interface 4-gang Design: UP (flush-mounting type) Item no.: 2076-4T-01 ETS search path: Input / Binary Input, 4-gang / Push button
More informationChapter5 Camera Settings and Other Functions
Chapter5 Camera Settings and Other Functions Changing Camera Settings.. 106 Adding or Deleting a Folder... 106 Keep Settings... 108 Changing the LCD Confirmation Time... 109 Auto Power Off Setting... 110
More informationInstruction Manual. from Software Version 1.01/03/02 (Manual Version 1.2) Internet:
Instruction Manual from Software Version 1.01/03/02 (Manual Version 1.2) e-mail: service@glp.de Internet: http://www.glp.de For your notes: GLP German Light Products GmbH (Manual Version 1.2) / from Software
More informationBASIC IMAGE RECORDING
BASIC IMAGE RECORDING BASIC IMAGE RECORDING This section describes the basic procedure for recording an image. Recording an Image Aiming the Camera Use both hands to hold the camera still when shooting
More information5 Channel Multifunctional PWM Controller. HomLiCon LCH5T. Technical Specifications
5 Channel Multifunctional PWM Controller Application Control of groups LED and LED strips Control of relays, small motors, fans, etc. Control models Technical Specifications Number of Channels 5 Color
More informationThe ideal replacement solution to the VL3000 Series spot or any other 1,000W to 1,500W lamped professional moving spot light.
The ideal replacement solution to the VL3000 Series spot or any other 1,000W to 1,500W lamped professional moving spot light. The Vari-Lite VLZ Profile is a dedicated profile luminaire utilizing the latest
More informationFEATURES MECHANICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS PRODUCT INTERFACE
DMX512 Wire Leads Input / Output FilmGrade DMX512 LED Dimmer / Decoder is a professional DMX512 dimmer and decoder that boasts the best dimming performance in the industry. The devices takes a low-voltage
More informationGuangzhou Liangyi Lighting Equipments Co., Ltd.
Guangzhou Liangyi Lighting Equipments Co., Ltd. 7 Gongyedadao,Xinhua, Huadu,Guangzhou PC: 50800 Tel : (00) 666 090 88-800 Fax: (00) 868 670 www.eklights.com USER MANUAL CONTENTS SAFETY DIMENSIONS DESCRIPTION
More informationpreview ALPHA 1500 Profile Spot HPE Beam Wash Wash LT Data and specifications are preliminary, subject to modifications
www.claypaky.it preview ALPHA 1500 Profile Spot HPE Beam Wash Wash LT Data and specifications are preliminary, subject to modifications Alpha Profile 1500 Alpha Spot HPE 1500 2 ALPHA 1500 RANGE Alpha Beam
More informationD750 Settings
D750 Settings 12.04.14 PLAYBACK MENU Delete Playback folder ALL Hide image Playback display options > Additional photo info > Highlights Shooting data Overview Copy images(s) Image review - OFF After delete
More informationIlluminati Wireless Light and Color Meter Model IM100. User Manual
Illuminati Wireless Light and Color Meter Model IM100 User Manual About the IM100 The Illuminati IM100 is the world s first Bluetooth-enabled wireless light and color meter. Use it with your smartphone
More information1. Safety instructions Control elements of the RoboSpot...4
Version 1.4 Table of contents 1. Safety instructions... 3 2. Control elements of the RoboSpot... 4 2.1 RoboSpot... 4 2.2 FollowSpot Controller... 5 3. Installation... 6 4. RoboSpot connection... 8 5. Operation...
More informationRoboSpot Base Station
Version 2.8 RoboSpot Base Station Table of contents 1. Safety instructions... 3 2. Description of the the RoboSpot... 4 2.1 RoboSpot... 4 2.2 FollowSpot Controller... 5 3. Installation... 6 3.1 Monitor
More informationGuangzhou Liangyi Lighting Equipments Co., Ltd.
Guangzhou Liangyi Lighting Equipments Co., Ltd. 37 Gongyedadao, Xinhua, Huadu,Guangzhou PC: 510800 Tel : (020) 666 090 88-8002 Fax: (020) 868 670 11 www.eklights.com USER MANUAL CONTENTS TROUBLE SHOOTING
More informationMAC 2000 Wash. user manual
MAC 2 Wash user manual 133½ 133½ 28 765 28 14 75 613 488 171 min c/c 48 27? 27 49 562 21-22 Martin Professional A/S, Denmark. All rights reserved. No part of this manual may be reproduced, in any form
More informationInstruction Manual. from Software Version 1.00/04 (Manual Version 1.4) Internet:
Instruction Manual from Software Version 1.00/04 (Manual Version 1.4) e-mail: service@glp.de Internet: http://www.glp.de For your notes: GLP German Light Products GmbH (Manual Version 1.4) / from Software
More informationORDERING INFORMATION
Information subject to change without notice OVERVIEW Fixture Overview High End Systems combines unprecedented light output from its 1000 watt Ultra-Brite White LED engine with a limitless palette of effects
More informationBASIC IMAGE RECORDING
BASIC IMAGE RECORDING BASIC IMAGE RECORDING This section describes the basic procedure for recording an image. Recording a Simple Snapshot The camera s Program AE Mode (P Mode) is for simple snapshots.
More informationSentido KNX Manual. Sentido KNX. Manual. basalte bvba hundelgemsesteenweg 1a 9820 merelbeke belgium
basalte bvba hundelgemsesteenweg a 980 merelbeke belgium / 68 06 basalte Table of contents:. Introduction... 3. Installation... 4. 3. Identifying the parts... 5 General... 6 3. General functions... 7 3.
More informationFSP-211 DIGITAL HIGH/LOW PIR FIXTURE INTEGRATED SENSOR
FSP-211 DIGITAL HIGH/LOW PIR FIXTURE INTEGRATED SENSOR CAUTIONS INSTALLATION INSTRUCTIONS IMPORTANT SAFEGUARDS When using electrical equipment, basic safety precautions should always be followed including
More informationInstruction Manual. from software version: v
Instruction Manual 20 from software version: v0.38 support@glp.de www.glp.de Contents 1 Description of Device... 3 2 Safety Instructions... 4 3 Mounting... 6 3.1.1 Operating on the Floor (Upright)... 7
More informationSingle-zone Daylighting Control Sequences of Operation. Topic: DLM Operation with LMLS-400 Photosensor, v2.xx Issue: # TB185 Date: March 10, 2012
Understanding the capabilities of Digital Lighting Management (DLM) photosensors, and how to configure the sensors for the desired control strategy is one key to successful daylighting controls projects.
More informationDMX-CONTROL OF MOTORISED DIMMER SHUTTER AND LAMP IGNITION
RJ NET FOR COMPACT FOLLOWSPOT RANGE Manual 1149B SUPER KORRIGAN 1449B LUCY 1159B VICTOR 1459B FLO DMXCONTROL OF MOTORISED DIMMER SHUTTER AND LAMP IGNITION Product version : "LUCY" 1449 : V3 "SUPER KORRIGAN"
More informationD-Movie Setting Guide
D-Movie Setting Guide En Table of Contents Workflow Making Movies: Workflow...4 Buttons and Icons Frequently-Used Controls...6 The Live View Display...7 The Live View Display... 7 The Information Display:
More informationUsed Gear For Sale. Price includes 4 way case. Sold in case quantities only. Price includes 4 way case. Sold in case quantities only.
Sharpy Wash 330 Compact, lightweight washlight, with luminous efficiency, graphic and optical performance of a 1000W fixture includes 4 way 20 Excellent 45x31x27 219.8 lbs 2013 $3,000.00 Platinum Beam
More informationTechnical data: Instabus EIB supply Voltage: YY 6 x 0.6 mm; red: bus (+) / black: bus (-)
Product designation: switching actuator 2fold 6A FM Design: FM (flush-mounted type) Article no.: 1057 00 ETS search path: Gira Giersiepen / Output / Binary output, 2fold / switching actuator 2fold 6A FM
More informationWidth (W): 44 mm. bus connecting and branching terminal External supply --- Inputs: Number: up to 2 (depending on parameterization: channel 1 to 2)
Product name: Design: 2-channel push button interface UP (flush-mounting type) Item no.: 1118 00 ETS search path: Gira Giersiepen / input / binary input, 2fold / Universal push putton interface 2fold Functional
More informationMinolta Scanner Plugin
Minolta Scanner Plugin For a list of Minolta digitizers and Geomagic software products with which this plugin is compatible, see Release Notes for Geomagic Minolta Plugin 7.6.0.3. Copyright 2005, Raindrop
More informationTime Switch, 2-channel, MDRC SW/S 2.5, GH Q R0001
, GH Q605 0062 R0001 The 2-fold week time switch is a DIN rail mounted device with a width of two modules for insertion in the distribution board. It is connected to the EIB via a bus connecting terminal.
More informationOCCUPANCY SENSOR REMOTE USER GUIDE
OCCUPANCY SENSOR REMOTE USER GUIDE Use the handheld programming remote to test and adjust the settings of your occupancy sensor, which can accommodate up to six sensor parameter profiles. FSP-2X1 is the
More informationAF Area Mode. Face Priority
Chapter 4: The Shooting Menu 71 AF Area Mode This next option on the second screen of the Shooting menu gives you several options for controlling how the autofocus frame is set up when the camera is in
More informationD850 Settings
D850 Settings 10.03.17 PLAYBACK MENU Delete Playback folder ALL Hide image Playback display options > Additional photo info > None Highlights Shooting data Overview Copy images(s) Image review - OFF After
More informationPHOTOMETRIC DATA OUTPUT
THE TOUCH OF LIGHT UKEwihiq3K3efZAhXFCuwKHUkWAd0QMwhVKAUwBQ..i&w=1800&h=1322&client=firefox-b-ab&bih=943&biw=1920&q=fu HIGH POWER COMPACT LED MOVING HEAD WITH BUILT-IN ROTATING FRAMING SYSTEM oco&ved=0ahukewihiq3k3efzahxfcuwkhukwad0qmwhvkauwbq&iact=mrc&uact=8
More informationUsed Gear For Sale. Price includes case. quantities only. Price includes 2 way. case. Sold in case. quantities only. Price includes 4 way
(402) 592-5522 Category Image r Model Details/Cases Qty. Available Condition Dimensions grandma2 Full MA Lighting s most powerful console and offers includes case the control of conventional light, moving
More informationRubix RGB 3D Panel. User Manual. Order code: LEDJ476
Rubix RGB 3D Panel User Manual Order code: LEDJ476 Safety advice WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CAREFULLY BEFORE YOUR INITIAL START-UP! Before your initial start-up, please make
More informationOperating Rausch ScanCam within POSM.
Operating Rausch ScanCam within POSM. POSM (Pipeline Observation System Management) // posmsoftware.com // info@posmsoftware.com // 859-274-0041 RAUSCH USA // www.rauschusa.com // reusa@rauschusa.com //
More informationA.LEDA WASH K5 A.LEDA WASH K10 A.LEDA WASH K20
ENGLISH K5 K K C6 C65 C6 INSTRUCTION MANUAL Page 5 7 INDEX Contents Safety information Unpacking and preparation Installation and start-up Control panel Menu setting Maintenance Optional accessories Technical
More informationInstruction Manual. from Software Version 1.09/0.3 (Manual Version 1.04) Internet:
Instruction Manual from Software Version 1.09/0.3 (Manual Version 1.04) e-mail: service@glp.de Internet: http://www.glp.de For your notes: GLP German Light Products GmbH (Manual Version 1.04) / from Software
More informationgfm-app.com User Manual
gfm-app.com User Manual 03.07.16 CONTENTS 1. MAIN CONTROLS Main interface 3 Control panel 3 Gesture controls 3-6 2. CAMERA FUNCTIONS Exposure 7 Focus 8 White balance 9 Zoom 10 Memory 11 3. AUTOMATED SEQUENCES
More informationAxon HD DMX Protocol Revised 3/24/14
Axon HD DMX Protocol Revised 3/24/14 AxonHD Media Server Channel Assignment AxonHD Global Control Name DMX Chan # Name DMX Chan # Global Intensity 1 Mask Size 29 Global Effect 1 2 Mask Edge 30 Global Effect
More informationFunctions module / Gateways Application Description Product Page KNX-GW-DMX-xxx DMX Gateway. KNX-GW-DMX Product Group 1
Seite 1 KNX---xxx Gateway KNX-- Product Group 1 Document: 4200_ex_KNX--.pdf KNX-- The KNX-- is a gateway between the KNX-Bus and the 512-Bus used by a wide range of devices for lighting applications. Article
More informationèõ Changing Recording Modes Text Mode Continuous Shooting Mode Changing Flash Modes Flash Off Mode Auto Mode...
3 ADVANCED SHOOTING Chapter ëêå@å@ èõ Changing Recording Modes... 52 Text Mode... 52 Continuous Shooting Mode... 53 Changing Flash Modes... 55 Flash Off Mode... 56 Auto Mode... 57 Forced Flash Mode...
More informationRev ABB i-bus KNX 6151/11 U-500. Power and productivity for a better world TM
1 73-1-7831 Rev. 01 3.2012 6151/11 U-500 Power and productivity for a better world TM Page: 1 of 31 Switching actuator 1gang with binary Inputs, FM Actuator Article-no.: 6151/11 U-500 ETS search path:
More informationMAC 2000 Wash. user manual
MAC 2000 Wash user manual 133½ 133½ 280 765 28 14 750 613 488 171 min c/c 408 270? 270 490 562 2001-2004 Martin Professional A/S, Denmark. All rights reserved. No part of this manual may be reproduced,
More informationRotational speed controller
Model number Features Rotational speed monitoring up to khz pre-select value with relay output and LED indicator Multi-range power pack -, -, -wire and NAMUR sensors as well as rotary encoder connectable
More informationOTHER RECORDING FUNCTIONS
OTHER RECORDING FUNCTIONS This chapter describes the other powerful features and functions that are available for recording. Exposure Compensation (EV Shift) Exposure compensation lets you change the exposure
More informationUser Manual. Software Version 14
User Manual Software Version 14 GLP KNV Cube and Arc User Manual Revision A This manual covers fixture software version 14 2018 German Light Products GmbH. All rights reserved. The marks GLP and German
More informationAxioVision 4.5 Brightfield Image Capture Procedure
AxioVision 4.5 Brightfield Image Capture Procedure 1. STARTING-UP PROCEDURE: Remove blue dust cover and place on shelf under microscope. Turn on the halogen lamp by pushing the switch at the back right
More informationFALCON BEAM ARC colour
FALCON BEAM ARC colour 3,W/7,W MADE IN GERMANY Powder-coated aluminium housing Weatherproof (IP44), lumens output (7,W) 16 bit precision movement The FALCON BEAM ARC colour is perfect for large architectural
More informationSHC-721A. Another Eye Guarding the World. Low Light, WDR, Day & Night Color Camera. SSNR
Another Eye Guarding the World Low Light, WDR, Day & Color Camera SHC-721A www.samsungcctv.com Built-in chip Originally Developed by Samsung Techwin Extreme Sensitivity, The SHC-721A is a high resolution
More informationDESCRIPTION & OPERATION: PIR OCCUPANCY SENSOR MSWSFSP221B-D FEATURES:
PROJECT NAME: CATALOG NUMBER: NOTES: FIXTURE SCHEDULE: Page: 1 of 5 PIR OCCUPANCY SENSOR DESCRIPTION & OPERATION: These fixture mounted sensors provide multi-level control based on motion and/or daylight
More informationApplication Description
Arcus-EDS Application Description Gateway KNX / DMX Art.-Nr. 40120186 Active Principle and Application Area The KNX-DMX Gateway is an Interface between the KNX bus and the DMX512 bus. It combines elements
More informationOTHER RECORDING FUNCTIONS
OTHER RECORDING FUNCTIONS This chapter describes the other powerful features and functions that are available for recording. Exposure Compensation (EV Shift) Exposure compensation lets you change the exposure
More informationSARG: The Graphical User Interface Manual
1/28 SARG: The Graphical User Interface Manual Document: TNG-SARG-001 Issue: 1.0 Prepared by : Name: S. Scuderi Institute: INAF-Osservatorio Astrofisico di Catania Date : Approved by : Name: R. Cosentino
More informationBIPRO-S600VF12 and BIPRO-S700VF50 OSD Manual. Please visit these product pages for more information on the BIPRO-S600VF12 and BIPRO-S700VF50 Cameras
BIPRO-S600VF12 and BIPRO-S700VF50 OSD Manual Please visit these product pages for more information on the BIPRO-S600VF12 and BIPRO-S700VF50 Cameras - Level (VIDEO) : Adjusts the level of video iris signals;
More informationFAG PRESTO DX. FAG PRESTO-DX preliminary User Manual. FAG GRAPHIC SYSTEMS S.A. 3, rue de la Vigie CH-1003 Lausanne Switzerland
FAG PRESTO DX FAG PRESTO-DX preliminary User Manual Table of Contents Safety Instructions... 4 DECLARATION OF CONFORMITY... Erreur! Signet non défini. PRESTO DX... 5 Pass Fail Indicator... 6 RESET and
More informationUSER S MANUAL. 580 TV Line OSD Bullet Camera With 2 External Illuminators
USER S MANUAL 580 TV Line OSD Bullet Camera With 2 External Illuminators Please read this manual thoroughly before operation and keep it handy for further reference. WARNING & CAUTION CAUTION RISK OF ELECTRIC
More informationNikon Z6 / Z7 Settings
Nikon Z6 / Z7 Settings 11.22.2018 PLAYBACK MENU Delete Playback folder ALL Playback display options > Additional photo info > Highlights Shooting data Overview None Image review - OFF After delete > Continue
More informationSeptember CoroCAM 6D. Camera Operation Training. Copyright 2012
CoroCAM 6D Camera Operation Training September 2012 CoroCAM 6D Body Rubber cover on SD Card slot & USB port Lens Cap retention loop Charging port, video & audio output, audio input Laser pointer CoroCAM
More informationRANDOM TRAINING SET UP
RANDOM TRAINING SET UP FITLIGHT Trainer Select Performance & Training Select Random Training 6 6 8 3 7 4 3 9 5 0 5 6 7 8.The deactivation distance can be set from 0 cms to 80 cms.. The time out can be
More informationAcknowledgments 13 Introduction 14 Chapter 1: Preliminary Setup Chapter 2: Basic Operations Chapter 3: Th e Shooting Modes
Contents Acknowledgments 13 Introduction 14 Chapter 1: Preliminary Setup 17 Setting Up the Camera 17 Charging and Inserting the Battery 17 Inserting the Memory Card 19 Setting the Language, Date, and Time
More informationAn Example of a Zero 88 Chilli Dimmer System used in a Multiple Ballroom scenario
An Example of a Zero 88 Chilli Dimmer System used in a Multiple Ballroom scenario A client requires a lighting system to be set-up in three Ballrooms. Each Ballroom has eight Lighting Fixtures ( Chandeliers)
More informationHow to Guide: Controlling Blinds in C-Bus
How to Guide: Controlling Blinds in C-Bus This document is a guide to controlling electrical blinds with C-Bus. Part 1 shows how the blind could be controlled by C-Bus directly and part 2 shows how C-Bus
More informationHigh/Low Bay Passive Infrared Occupancy Sensor
Models Sensors: HBP-111-L7, with IR remote capability HBP-112-L7, no IR capability High/Low Bay Passive Infrared Occupancy Sensor Mounting Modules: HBP-EM1 extender module HBP-SM1 surface mount module
More information