FC7000Mk2 Series FC7000Mk

Transcription

1 FC7000Mk2 Series FC7000Mk Advanced Multi-functional Cutting Plotter Technology for Plotting, Cutting and Pouncing Applications. ARMS Advanced Registration Mark Sensing System Industry Leading Cutting Speed High Cutting Force Smooth & Accurate (15 m tracking) Expanded model lineup User-friendly interface Expanded software compatibility FC7000Mk inch FC7000Mk inch FC7000Mk inch FC7000Mk inch Store Banners Traffic Signs Window Signs Screen Photo Masks Vinyl Graphics Sandblast Signs NEW! 24 inch model FC7000Mk inch

2 The world's most high-performance cutter in its class An all-in-one cutter head for supporting additional applications to improve productivity and reliability. 600gf maximum cutting pressure Highest cutting pressure in its class for cutting wider range of materials 1485mm/s maximum cutting speed Fastest cutting speed in its class for the highest productivity Reliable long-length tracking capability Strengthened body for secured media feeding The FC7000Mk2 series succeed high performance and functionality, and provide the world s greatest class of cutting quality and productivity. Further more, a newly designed media basket provides a more stable long length cutting than previous model for 15 m (50 feet) tracking guarantee* 1. *1: When using Graphtec specified conditions The newly designed media basket for standard accessory A new designed media basket is available for all FC7000Mk2 series facilitates dust-free cutting/plotting operations and enhanced media tracking for long, continuous project applications. The collapsible front and rear baskets keep the media off the shop floor preventing dust and residue accumulation on the media. This feature can even enhance the plotter s tracking performance.

3 New functions for better productivity ARMS is just one of the great technologies integrated in FC7000Mk2... other standard features are included to increase your productivity. New design for easier operation The FC7000Mk2 is designed with user-friendly features such as easy-to-use menu navigation. Automatic cross cutter The automatic cross cutter provides a simple solution for obtaining a straight sheet cut-off of your finished job. Choose from a standard or heavy-duty cutter. Light pointer The light pointer provides an alternative to the automatic ARMS system, allowing users to manually detect registration marks. This feature is especially useful when working with highly reflective material as well as tracing cut jobs for proofing prior to cutting the job. Blade length navigator The new blade length navigator provides the user the control of obtaining optimum blade length extension for their selected material thickness. This feature also virtually eliminates the chance of damaging the blade. New media supply mechanism The new media supply mechanism assists users to load and align the media accurately. This feature also prevents media from accidentally feeding out of the roll during a cutting operation, saving operator frustration increasing overall productivity. Variable push roller pressure Depending on the media type being used, the FC7000Mk2 allows users to choose from 2 selectable push roller settings for optimum media feeding performance. Bi-directional media loading For the ultimate convenience and versatility. Users now have the capability to load media from either the front or back of the FC7000Mk2, depending location and convenience of the plotter. FRONT Plotter Controller This software allows direct control of a wide range of FC7000Mk2 functions from a PC, including cutting speed, cutting pressure, pen movement, and ARMS control. The ability to control various plotter settings from a PC dramatically improves work and operating efficiency. REAR ARMS Advanced Registration Mark Sensing System The powerful ARMS (Advanced Registration Mark Sensing System) feature simplifies contour cutting of printed images as well as significantly improving overall productivity for contour cutting items such as labels or stickers. ARMS includes several automatic registration mark sensing that makes it even easier to read the registration marks (position alignment marks) along with several types of patterns such as the Segment Area Correction that ensures accurate cutting along the entire length of even large and long-format drawings. Four-point registration mark (two-axis skew) correction Four-point registration mark sensing and X/Y-axis correction uses high-precision positioning to ensure accurate cutting of graphics that have been skewed or distorted during printed. Segment area correction The intermediate registration marks in the media feed direction are detected to allow four-point correction for each individual segment area. This enables high-precision positioning of the whole area of skewed prints produced using long-length printing. Data Print Skewed/distorted printed graphic Cut Graphtec two-axis corrected cutting Conventional single-axis corrected cutting Intermediate registration marks are used for four-point correction of each individual segment area and the entire output is cut at once. Intermediate registration marks

4 Includes a range of software applications that improve work efficiency and simplify operations. Optional Features... Cutting Master 2 This plug-in software allows direct cutting from graphics applications. For higher productivity, create graphics or text in Adobe Illustrator or CorelDraw, then simply output directly to the plotter. Large LCD display w/back light A large backlit LCD display allows users to quickly glance at all cutting conditions. Main Features Cutting conditions setting Test cut Position move Rotation Origin point Key board control Registration mark setting Auto-mark reading Mark size, distance OS version Windows, 2000, XP, Vista * USB I/F only * Windows Vista compatible driver/ software is available at Graphtec website Main Features Direct output from the software Output by layer / color Possible to check the cutting lines by preview window Multiple over cutting is possible ARMS can be controlled by software Centering, Rotate, Mirror for easy layout Matrix copy for higher productivity Auto-welding for binding same color of shapes Tiling / Paneling for segmentation of cutting OS version Software version Windows, 2000, XP, Vista Mac OS X, 10.2 or later Illustrator for Windows 8, 9, 10, CS, CS2, CS3 Illustrator for Mac 10, CS, CS2, CS3 Corel DRAW 10, 11, 12, X3 stocker Maintain up to 3 extra full-length rolls conveniently at the foot of your plotter. The media rack option enhances job efficiency and productivity by allowing you to quickly switch between media rolls or directly feed material from the rack. Each optional rack holds one full-length roll of media for easy, quick roll exchange and allows you to switch between media color, type, and size with minimal effort. Multiple registration mark correction Layout instructions are sent together with the cutting data for designs printed using layout functions such as set in a RIP, enabling continuous detection of registration marks for cutting. This feature is excellent when high accuracy is needed when cutting an array of copies. Patent pending Automatic registration mark detection The first registration mark is detected automatically, eliminating the need to move the sensor to the registration mark manually. Subsequent registration marks are automatically redetected even if sensing errors occur, simplifying the process of registration mark sensing. Supports registration mark commands Cutting data sent to plotter with layout instructions Registration mark commands are provided to control ARMS functions from a PC. Registration mark data including size and spacing can be controlled to simplify operations. Cutting Master 2 Plotter Controller 1cut 3cut 2cut 4cut The ARMS head minimizes environmental influences that could otherwise cause incorrect readings of registration mark sensing.

5 Variety of applications... Vinyl cut Pen Plot Pouncing The unsurpassed versatility of the FC7000Mk2 series is further augmented with its capability to plot, cut and pounce without having to alter the plotter's mechanical configuration. To configure the FC7000Mk2 for any job-specific setup among test plotting, cutting or pouncing paper stencil, simply install the specific tool required for the next job and select one of the eight user-programmable settings that corresponds to the type of tool (as well as any other pertinent job requirements). The variegated material is cut. Reflective Film, Sandblast material, EC Film, Polyester Film, Rubylith, Tint Film, Screen Printing, Car Window, Traffic Sign, Masking Stone/Glass Sign, Automobile Paint Protection, Garment Vinyl, Signage, Vehicle Graphics, Vinyl, Paper, Sticker Sophisticated tangential control algorithms When the Tangential Control mode is engaged, the FC7000Mk2 over-cuts the mechanical tangential system both in speed and output quality by precisely and intelligently controlling the blade rotation. The on-board tool height sensor detects the blade tip's landing on the media surface, then intelligently and precisely aligns the blade rotation for the following cutting operation, all in a fraction of a microsecond. Graphtec's proprietary technology allows this sophisticated feature to completely eliminate distorted, rounded, or lifted corners - even when highly intricate design cutting is required on mm (1 mil ). vinyl film or up to 1.25 mm (50 mil ). sandblast rubber. This innovative and high precision system architecture is what enables the FC7000Mk2 to cut text strings as small as 1.58 mm (1/16 inch ) on vinyl. There is no other cutter/plotter on the market that can match the FC7000Mk2 Series' unsurpassed precision and built-in intelligence. Tool Soft Landing Intelligence Improved cutting/plotting quality and prolonged tool life are just a few of the outstanding standard features you can expect from the FC7000Mk2 series, made possible by the innovative Tool Soft Landing Intelligence. The Graphtec proprietary closed-loop servo actuator, with an integrated precision sensor, ensures quick, precise, yet gentle tool contact with the material surface during up and down motions. In addition to superior and accurate output, the Soft Landing feature prolongs the life of the cutting/plotting tool and maximizes throughput performance. The innovative Tool Soft Landing Intelligence provides not only consistent and optimum cutting quality throughout the job, but the benefit of cost-saving tool maintenance as well.

6 Specifications Model FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 CPU 32-Bit Configuration Digital Servo Friction feed with MicroGritroll TM drive Max. cut area (expanded mode) Guaranteed precision cutting area 610 mm x 50m (24 in x 164 ft ) 590 mm x 15m (23.2 in x 50 ft ) 762 mm x 50m (30 in x 164 ft ) 742 mm x 15m (29.2 in x 50 ft ) Max. width 770 mm (30.3 in) 920 mm (36.2 in) 1224 mm (48.1 in) 1529 mm (60.1 in) 1834 mm (72.2 in) Mountable media Min. width 50 mm (2 in) Max. diameter 200 mm Max. weight 12 kg (26 lbs) 12 kg (26 lbs) 16 kg (35 lbs) 20 kg (44 lbs) 24 kg (53 lbs) Max. cross cut area 730mm (28.7 in) 901mm (35.5 in) 1206mm (47.5 in) 1511mm (59.5 in) 1765mm (69.5 in) Max. cutting speed (Axial) 1485 mm / sec (58.5 in/s) at a 45º angle Max. axial acceleration 4.0 G (39.2 m/s2) Cutting pressure 20 g to 600 g (0.196 N to 5.88 N) in 48 steps Min. character size *1 3 mm (0.125 in) alphanumeric Helvetica med. Font Mechanical resolution mm ( in) Programmable resolution GP-GL : 0.1 / 0.05 / / 0.01 mm, HP-GL TM : mm Repeatability *2 Max. 0.1 mm / 2 m ( in / 80in) Tools Accepts (1) cutting blade, (1) plotting pen, and (1) pouncing tool ; Second penholder (optional) Blade types Supersteel (0.9 mm or 1.5 mm), Sapphire(1.5 mm) Pen types Water-based fiber-tip, oil-based ballpoint, and disposable ink pens Pouncing tool type Requires optional pouncing tool : (PPA33-TP12, 1.2-mm pin diameter) Media types Self-adhesive vinyl film, diamond grade, fluorescent film, reflective film, Amberlith TM, Rubylith TM, window film, high-intensity reflective film*3, paint protection film, up to 0.25 mm tick, sandblast resist rubber up to 1 mm thick, etc. Compatible paper for pouncing Regular paper from 0.06 to 0.13 mm thick Standard interfaces RS-232C / USB2.0 (Full speed) Buffer memory 2 MB Command sets GP-GL / HP-GL TM * 4 LCD Panel LCD 20 x 4 - Supports 7 languages: with amber backlight Power supply 100 to 240 VAC/50 to 60 Hz (Auto switching) Power consumption 160 VA max. Operating environment Temperature: +10º C to +35º C Humidity: 35 % to 75 % (non-condensing) Guaranteed accuracy environment Temperature: +16º C to +32º Humidity: 35 % to 70 % (non-condensing) External dimensions (W x D x H) 1110 x 715 x 1210 mm 1260 x 715 x 1210 mm 1560 x 715 x 1210 mm 1860 x 715 x 1210 mm 2120 x 715 x 1210 mm including stand * x 47.6 x 28.1 in 49.6 x 47.6 x 28.1 in 61.4 x 47.6 x 28.1 in 73.2 x 47.6 x 28.1 in 83.5 x 47.6 x 28.1 in Weight including stand 36 kg (79 lbs) 39 kg (86 lbs) 43 kg (95 lbs) 51 kg (112 lbs) 59 kg (130 lbs) Compatible OS Windows 2000/Windows XP/Windows Vista *6 Macintosh OS 9.X to 10.X Certifications UL, cul, CE marking, RoHS *1 The CB15UB cutter blade is recommended when cutting characters which size is 10 mm or smaller. *2 When operated with Graphtec specified media and conditions. *3 The CB15UA cutter blade and a reinforced backing sheet must be used when cutting high-intensity reflective film. *4 HP-GL TM is a registered trademark of Hewlett-Packard Company. *5 Tolerance : +/- 5 mm *6 Windows Vista compatible driver/software is available at Graphtec web site (from middle of July, 2007) 1067 mm x 50m (42 in x 164 ft ) 1047 mm x 15m (41.2 in x 50 ft ) 1372 mm x 50m (54 in x 146 ft ) 1352 mm x 15m (53.2 in x 50 ft ) 1626 mm x 50m (64 in x 146 ft ) 1606 mm x 15m (63.2 in x 50 ft ) Standard accessories AC power cord USB cable (3-m length) User Guide CD-ROM Contains:User's Manual(pdf) and Windows driver, Windows / Macintosh Plug-in Software Quick Start Manual, Usage Precautions Cutter holder (PHP32-CB09N) Water-based fibertip pen Cutter blades (CB09UA-2) Stand Media bracket Media basket Options Item stocker 60 stocker 75 stocker 100 stocker 130 stocker 160 Second penholder Model RSK0014 RSK0010 RSK0011 RSK0012 RSK0013 ECK006 Contents FC7000Mk2-60 FC7000Mk2-75 FC7000Mk2-100 FC7000Mk2-130 FC7000Mk2-160 Factory installed option Supplies Cutter plunger Cutter blade Pouncing pen Water-based fiber-tip pen 1 plunger for the 0.9 mm diameter supersteel blade 1 plunger for the 1.5 mm diameter supersteel blade 1 plunger for the 1.5 mm diameter supersteel blade with grease 1 plunger for the 1.5 mm diameter supersteel blade for CB15-5SP and CB15U-K30-5SP Set of mm diameter supersteel blades with spring for common marking film Set of mm diameter supersteel blades for thicker marking film Set of mm diameter supersteel blades for cutting detailed characters (within 10 mm) Set of mm diameter supersteel blades for sandblast rubber sheet Set of mm diameter supersteel blades with spring for intensity reflective media. One set of plunger and needle 1 each black, red, violet, brown, blue, green, orange, pink 2 black, 1 each red, blue, green 5 red 5 black 5 blue 5 green Ballpoint pen plunger Set of 2 Oil-based ballpoint pen 2 black, 1 each red, blue, green Disposable ink with ink tank pen plunger Disposable ink pen Set of mm diameter black for paper Set of mm diameter black for paper Set of mm diameter black for paper Set of mm diameter black for film Set of mm diameter black for film Set of mm diameter black for film Loupe Pen type loupe with 6x magnification Cross-cutter unit Supersteel blade High functional type External Dimensions 1190mm 20mm 1110mm(FC7000MK2-60) 1260mm(FC7000MK2-75) 1560mm(FC7000MK2-100) 1860mm(FC7000MK2-130) 2120mm(FC7000MK2-160) 209mm 715mm 90mm 1014mm Windows is a trademark or a registered trademark of Microsoft Corporation in the United State and other countries. HP-GL is a registered trademark of Hewlett-Packard Company. Macintosh is a registered trademark of Apple Computer, Inc. Illustrator is a registered trademark of Adobe Systems Inc. Other software and hardware names contained in this document are trademarks or registered trademarks of respective companies. The information in this catalog is accurate and complete as of July 22, The information in this catalog, such as specifications, is subject to change without notice. Please be sure to visit our website and check the latest information before purchasing Shinano-cho, Totsuka-ku, Yokohama , Japan Tel : Fax : webinfo@graphtec.co.jp Website cp as Printed in Japan